Industrial Variable Speed A-C Motors B-4511

Size: px

Start display at page:

Download "Industrial Variable Speed A-C Motors B-4511"

Jessie Perkins
5 years ago
Views:

2 Industrial Variable Speed A-C Motors

3 The Reliance is an integrated motor and control product offering power matched variable speed performance in a single package.

4 Applications Material Handling. Fluid Handling. Air Handling/HVAC. Mixing.

5 Position Simple, cost-effective alternative to A-C or D-C drive/motor combinations as well as belt/pulley and traction type mechanical adjustable-speed drives. Easy-to-Use Lowers Installation Costs Reliable Operation Flexible and Compact

6 Easy to Use Variable speed motor without the complexity of a full function drive. Intuitive operation eliminates operator training while maximizing productivity by reducing the chance of operator error. Remembers previously set speed for production consistency. LED fault indication speeds troubleshooting (overcurrent, over temperature, etc.).

7 Lowers Installation Costs Eliminates the need for a push-button start/stop switch (mechanical drive replacement). Single preconfigured unit to mount and wire instead of two. Only requires connecting two power leads. All other leads are preconnected. Optimal plug-in remote operator control minimizes on-site wiring costs.

8 Meets U.L. and CSA standards. Power matched motor and controller. Reliable Operation Volts per Hz ratio is specifically matched. Immunity to insulation damaging voltage spikes ( dv/dt ). VSM package rated like a motor. Single-phase input, three-phase output. Designed and manufactured and built by Reliance Electric.

9 Foot or C-face mounting Bi-directional operation (via motor connection). 180 RPM through 2700 RPM speeds (4- pole motor). 4:1 constant torque or 10:1 variable torque operation. Enclosure is IP54 rated for use in harsh environments. Flexible & Compact

10 Flexible & Compact Integral operator control can be rotated in 90 o increments to meet various mounting requirements.

11 Flexible & Compact Optional remote operator control. Current limit rating of 150% accommodates hard to start loads or overloads. Compact size makes ideal for portable equipment.

12 Specifications Horsepower: 1/4 to 2 Speed: 1800, constant torque 4:1, variable torque 10:1. Enclosure: TEFC Frame: 56 & 140T Power Supply: Single phase, 60/50 Hz, 115 or 230 Volts 1/4 to 1 HP: 115 VAC 1/4 to 2 HP: 230 VAC Continuous Duty. 1.0 Service Factor

13 Motor High efficiency E Master design. IP54 enclosure - splash-proof. Insulation is designed for use with the control output for long service life. 4:1 (constant torque) or 10:1 (variable torque) speed range.

14 Controller New IGBT technology. IP54 enclosure Keypad rotates 90 o. Displays percent speed up to 150%. Displays fault codes. Preconfigured with no setup required. Easy to use push buttons. One set of normally opened output contact for user pilot devices.

15 Control over temperature. Motor over temperature. Over current (overload). High bus voltage. Low bus voltage. Power module failure. Circuit board fault. Faults Displayed

16 Overload Protection Automatic reset temperature limiting device for overload protection. 150% overload capability for 1 minute. Input line surge suppressers - mov. Input line fuses.

Optional Features Continuos blower cooling for constant torque operation over a 10:1 Speed Range. Remote operator control kit with cable up to 50 feet.

17 Optional Features Continuos blower cooling for constant torque operation over a 10:1 Speed Range. Remote operator control kit with cable up to 50 feet. Device Net for interfacing with PLC [ in future development plans]. Analog input kit for custom operator control or process control 0-10 volts /4-20 ma.

18 Design Cast aluminum control enclosure Innovative fin design directs air flow to maximize heat transfer. Additional cooling fins in areas of high heat concentration. Thermoplastic fan shroud (Valox 357)

19 Design Printed circuit board Third generation power module. Proven Technology used in Drive Design. Open loop operation Shock and vibration designed to motor standards

20 Design U.L. Approval U.L. 508 Standard for Safety - Industrial Control Equipment. U.L Standard for Safety - Electric Motors. CE Conformity Filter kit available with CE Certification of Conformity label.

21 50 Prototypes Life Tested Reliability and Life Test Reliance Electric Beta sites Load test Steady state heat run Thermal cycling Shock and vibration Electrical test Transient protection

22 Production Test 100% and 150% load test on board. Motor and control no load test. Hi-pot test on control. Hi-pot on control and motor combination.

MaxPak Plus Analog DC V S Drive

MaxPak Plus Analog DC V S Drive Three-Phase 3-600 HP non-regenerative and 5-150 HP regenerative drives Designed to accommodate a wide range of industrial requirements, the DC V S Drive has been widely applied worldwide. Selected ratings