1/2 thru 1.5 Hp 1/2 thru 3 Hp 2 thru 5 Hp 1 thru 10 Hp
|
|
|
- Ezra Scot Simon
- 5 years ago
- Views:
Transcription
1 VS1MX AC Micro Drive 1/2 thru 1.5 Hp 1/2 thru 3 Hp 2 thru 5 Hp 1 thru 10 Hp & Controls 115 VAC 230 VAC 230 VAC 460 VAC 1 Phase - 50/60 Hz 1 Phase - 50/60 Hz 3 Phase - 50/60 Hz 3 Phase - 50/60 Hz Applications: Applications that require a washdown or harsh duty enclosure. Ideal for environments where dust, oil mist or water is prevalent. Variable torque, constant torque or constant horsepower applications. Target stand alone applications where a local disconnect is required. New installations, replacements and original equipment manufactures (OEM). Features: Volts per Hertz Control with peak overload capacity of 175%. Flexible mounting options NEMA 12, NEMA 4X, Input Disconnect models and EMC Filter models. Integral keypad, operator interface and local speed control. Basic set of less than forty programming parameters. Power ratings up to 10 Hp in 460V versions. Performance Features Control Modes V/Hz or Sensorless Vector Operator Interface Module Integral Drive Mounted Display Lines 6-Character LED Display Programmable Preset Speeds Four Analog Outputs One (0-10 VDC) Auto Restart Yes Up to 5 attempts Frequency Avoidance One Band Fault History Last Four Faults Digital Inputs Three Configurable Inputs Digital Inputs Type Pull-Up Drive Specifications Analog Inputs: One 0-10VDC or 4 to 20mA Digital Outputs: Two Total One Built-in Form C Relay, One Optional Form C Relay Meter Outputs 0-10 VDC: One Analog Usable for Meter (Freq., Current, Voltage, or Digital Output) Maximum Load VAC Overload Capacity Drive Output 150% for one minute and 175% for 2 seconds Input Voltage Ranges 115 VAC (99-126); 230 VAC ( ); 460 VAC ( ) Rated Input Frequency 50-60Hz (±5%) Carrier Frequency 4-32 khz (8 khz default) Operating Temperature 10 to 40 C Snubber (Dynamic Braking) Built-in Transistor on Frames 2 and 3 only Dynamic Braking External Up to 150% Dynamic Braking with appropriately sized resistor DC Injection Braking Included Volts/Hz Linear V/Hz, Energy Optimizer Function Sensorless Vector Full Sensorless Vector Control with Autotune Function and motor model Frequency Control Range 0-500Hz Accel/Decel Independently adjustable accel. & decel. ramps Time Range 0.1 to 3000 Seconds Keypad Speed Control Yes Sink/Source Inputs Selectable, 24 VDC Logic Electronic Overload Trip Electronic Motor Overload Inverse 150% for 1 minute or 175% for 2 Communications Built-in MODBUS-RTU (RS-485) Communications PID Control Future Release Protective Features Under Voltage Level Depends on Voltage Class (240, 480, or 575) Output Short Circuit Phase-to-Phase on Drive Output Over Temperature Heatsink Monitor DC Bus Overvoltage DC Bus Level Trip Drive Overload Exceed Drive rating of 150% for One Minute or 175% for 2 seconds Over Current Over-current/short-Circuit protection Output Phase Trips on open Output Phase Loss of Reference Trips on Loss of Speed Command Signal Comm. Error Detects a communication error (fault) Agency Certifications UL, cul, CE, CCC, C-tick Service Conditions Altitude 1,000 m (3,300 ft.), derate by 1% per 100m up to 2,000m maximum Ambient Temperature IP20: -10 C (14 F) to 40 C (102 F) Storage Temperature -40 C (-40 F) to 60 C (140 F) Relative Humidity 10% to 95%, non-condensing Intermittent Overload 150% overload capacity for up to 1 minute, 175% overload capacity for up to 2 seconds Brake & Controls DC 223
2 & Controls VS1MX 115V, 50/60 Hz, 1-Phase Input (230V, 3-Phase Output) VS1MX10P5-4 No No A EA VS1MX10P5-4D No Yes A EA VS1MX11-4 No No A EA VS1MX11-4D No Yes A EA VS1MX11P5-4T No No B EA VS1MX11P5-4TD No Yes B EA Brake & Controls VS1MX 115V, 50/60 Hz, 1-Phase Input (230V, 3-Phase Output) VS1MX10P5-2 No No A EA VS1MX10P5-2D No Yes A EA VS1MX11-2 No No A EA VS1MX11-2D No Yes A EA VS1MX11P5-2T No No B EA VS1MX11P5-2TD No Yes B EA VS1MX 230V, 50/60 Hz, 1-Phase Input (230V, 3-Phase Output) VS1MX80P5-4 No No A EA VS1MX80P5-4F Yes No A EA VS1MX80P5-4D No Yes A EA VS1MX80P5-4DF Yes Yes A EA VS1MX81-4 No No A EA VS1MX81-4F Yes No A EA VS1MX81-4D No Yes A EA VS1MX81-4DF Yes Yes A EA VS1MX82-4 No No A EA VS1MX82-4F Yes No A EA VS1MX82-4D No Yes A EA VS1MX82-4DF Yes Yes A EA VS1MX82-4T No No B EA VS1MX82-4TF Yes Yes B EA VS1MX82-4TD No Yes B EA VS1MX82-4TDF Yes Yes B EA VS1MX83-4T No No B EA VS1MX83-4TF Yes No B EA VS1MX83-4TD No Yes B EA VS1MX83-4TDF Yes Yes B ,013 EA DC Soft Start & 224
3 & Controls VS1MX 230V, 50/60 Hz, 1-Phase Input (230V, 3-Phase Output) VS1MX80P5-2 No No A EA VS1MX80P5-2F Yes No A EA VS1MX80P5-2D No Yes A EA VS1MX80P5-2DF Yes Yes A EA VS1MX81-2 No No A EA VS1MX81-2F Yes No A EA VS1MX81-2D No Yes A EA VS1MX81-2DF Yes Yes A EA VS1MX82-2 No No A EA VS1MX82-2F Yes No A EA VS1MX82-2D No Yes A EA VS1MX82-2DF Yes Yes A EA VS1MX82-2T No No B EA VS1MX82-2TF No No B EA VS1MX82-2TD Yes No B EA VS1MX82-2TDF Yes No B EA VS1MX83-2T No No B EA VS1MX83-2TF Yes No B EA VS1MX83-2TD No Yes B EA VS1MX83-2TDF Yes Yes B EA VS1MX 230V, 50/60 Hz, 3-Phase Input (230V, 3-Phase Output) VS1MX20P5-4 No No A EA VS1MX20P5-4D No Yes A EA VS1MX21-4 No No A EA VS1MX21-4D No Yes A EA VS1MX22-4 No No A EA VS1MX22-4D No Yes A EA VS1MX22-4T No No B EA VS1MX22-4TF Yes No B EA VS1MX22-4TD No Yes B EA VS1MX22-4TDF Yes Yes B EA VS1MX23-4T No No B EA VS1MX23-4TF Yes No B EA VS1MX23-4TD No Yes B EA VS1MX23-4TDF Yes Yes B EA VS1MX25-4T No No C ,075 EA VS1MX25-4TF Yes No C ,183 EA VS1MX25-4TD No Yes C ,183 EA VS1MX25-4TDF Yes Yes C ,301 EA Brake & Controls DC 225
4 Brake & Controls DC & Controls VS1MX 230V, 50/60 Hz, 3-Phase Input (230V, 3-Phase Output) VS1MX20P5-2 No No A EA VS1MX20P5-2D No Yes A EA VS1MX21-2 No No A EA VS1MX21-2D No Yes A EA VS1MX22-2 No No A EA VS1MX22-2D No Yes A EA VS1MX22-2T No No A EA VS1MX22-2TF Yes No B EA VS1MX22-2TD No Yes A EA VS1MX22-2TDF Yes Yes B EA VS1MX23-2T No No B EA VS1MX23-2TF Yes No B EA VS1MX23-2TD No Yes B EA VS1MX23-2TDF Yes Yes B EA VS1MX 460V, 50/60 Hz, 3-Phase Input (460V, 3-Phase Output) VS1MX41-4 No No A EA VS1MX41-4F Yes No A EA VS1MX41-4D No Yes A EA VS1MX41-4DF Yes Yes A EA VS1MX42-4 No No A EA VS1MX42-4F Yes No A EA VS1MX42-4D No Yes A EA VS1MX42-4DF Yes Yes A ,023 EA VS1MX42-4T No No B EA VS1MX42-4TF Yes No B ,033 EA VS1MX42-4TD No Yes B ,033 EA VS1MX42-4TDF Yes Yes B ,137 EA VS1MX43-4T No No B EA VS1MX43-4TF Yes No B ,075 EA VS1MX43-4TD No Yes B ,075 EA VS1MX43-4TDF Yes Yes B ,183 EA VS1MX45-4T No No B ,215 EA VS1MX45-4TF Yes No B ,337 EA VS1MX45-4TD No Yes B ,337 EA VS1MX45-4TDF Yes Yes B ,470 EA VS1MX47-4T No No C ,569 EA VS1MX47-4TF Yes No C ,726 EA VS1MX47-4TD No Yes C ,726 EA VS1MX47-4TDF Yes Yes C ,898 EA VS1MX410-4T No No C ,861 EA VS1MX410-4TF Yes No C ,047 EA VS1MX410-4TD No Yes C ,047 EA VS1MX410-4TDF Yes Yes C ,884 EA Soft Start & 226
5 & Controls VS1MX 460V, 50/60 Hz, 3-Phase Input (460V, 3-Phase Output) Catalog Number EMC Filter Disconnect Frame Hp Output Current List Mult. Sym. VS1MX41-2 No No A EA VS1MX41-2F Yes No A EA VS1MX41-2D No Yes A EA VS1MX41-2DF Yes Yes A EA VS1MX42-2 No No A EA VS1MX42-2F Yes No A EA VS1MX42-2D No Yes A EA VS1MX42-2DF Yes Yes A EA VS1MX42-2T No No B EA VS1MX42-2TF Yes No B EA VS1MX42-2TD No Yes B EA VS1MX42-2TDF Yes Yes B ,046 EA VS1MX43-2T No No B EA VS1MX43-2TF Yes No B EA VS1MX43-2TD No Yes B EA VS1MX43-2TDF Yes Yes B ,088 EA VS1MX45-2T No No B ,118 EA VS1MX45-2TF Yes No B ,230 EA VS1MX45-2TD No Yes B ,230 EA VS1MX45-2TDF Yes Yes B ,353 EA Mounting Dimensions - NEMA 12 (IP55) Frame Height Width Depth A 7.87 (200) 5.51 (140) 6.54 (166) B 12.2 (310) 6.5 (165) 7.04 (180) Mounting Dimensions - NEMA 4X (IP66) Frame Height Width Depth A 9.13 (232) 6.34 (161) 6.89 (175) B (257) 7.40 (178) 7.30 (185.5) C (305) 8.29 (210.5) 8.97 (227.8) Brake VS1MX Accessories VS1ST Accessories are compatible with the VS1MX. See appropriate catalog pages for a list of available options. Other options for the VS1MX are as follows: VS1MX Dynamic Braking Resistors VS1MX Frame B and C drives include built-in braking transistors to aid in applications requiring the ability to stop rapidly. The resistor kit is designed for the VS1MX and mount external to the drive. Description Catalog Number List Price Mult. Sym. DB Resistor 50 Ohm, 200 Watt VS1MX-R50W EA & Controls DC VS1MX IP55 Padlock VS1MX IP55 Drives with a built in disconnect switch can be locked out using the padlock below. Description Catalog Number List Price Mult. Sym. VS1MX IP55 Padlock VS1MX-ILOCK 32 EA 227
1/2 thru 1.5 Hp 1/2 thru 3 Hp 2 thru 5 Hp 1 thru 10 Hp
VS1MX AC Micro Drive 1/2 thru 1.5 Hp 1/2 thru 3 Hp 2 thru 5 Hp 1 thru 10 Hp & Controls 115 VAC 230 VAC 230 VAC 460 VAC 1 Phase - 50/60 Hz 1 Phase - 50/60 Hz 3 Phase - 50/60 Hz 3 Phase - 50/60 Hz Applications:
CATALOG. ABB micro drives ACS255, 0.25 to 20 hp / 0.37 to 15 kw
CATALOG ABB micro drives ACS255, 0.25 to 20 hp / 0.37 to 15 kw 2 Select and order your drive Type designation is a unique reference number that clearly identifies the drive by construction, power and voltage
REGAL-BELOIT SpinMaster AC Adjustable Speed Drives
REGAL-BELOIT SpinMaster Volts/Hertz Constant Torque, Micro Inverter Applications: Constant torque or constant horsepower applications. Typical applications include conveyors, packaging machinery, machine
Description 1/8-7.5HP
Description 1/8-7.5HP J1000 In our pursuit to create drives optimized for variable speed needs in compact applications, the J1000 is the solution. This micro-drive is simple and reliable with Yaskawa quality.
Phoenix DX Sensorless AC Vector Drive. 3 HP to 3500 HP
Phoenix DX Sensorless AC Vector Drive 3 HP to 3500 HP Standard Features: * PRECISE CONTROL OF MOTOR SPEED AND TORQUE * BI-DIRECTIONAL FLYCATCHER (CATCH SPINNING MOTOR) * EASY TO USE, SIMPLE SETUP * POWER
BR Second Position Voltages. AA Fourth Position
1336S First Position Bulletin Number BR Second Position Voltage Letter AQ BR CW A B BP BX C Q R RX W Voltages 200-240V AC or 3V DC 380-480VAC or 513-620V DC 500-600V AC or 775V DC or 200-240V AC 380-480V
VSD Series II Variable Speed Micro Drives
VSD Series II Variable Speed Micro Drives Product Bulletin Code No. LIT-12011813 Issued March 26, 2013 Refer to the QuickLIT website for the most up-to-date version of this document. Johnson Controls VSD
Variable Frequency Drive NEW! Moving your Control. Forward VFD from Unitronics kW Single Phase kW Three Phase
Variable Frequency Drive Moving your Control NEW! Forward VFD from Unitronics 0.4-2.2kW Single Phase 0.75-110kW Three Phase Total Solution All-in-One software PLC programming HMI design NEW! VFD configuration
GS2 Series - Introduction
GS2 Series - Introduction GS2 Series Drives Rating Hp.25.5 1 2 3 5 7.5 10 kw 0.2 0.4 0.75 1.5 2.2 3.7 5.5 7.5 Single-Phase 115 Volt Class Single/Three-Phase 230 Volt Class Three-Phase 230 Volt Class Three-Phase
Delta Products VFD CP2000 Bypass Control Packages.
Delta Products VFD CP2000 Bypass Control Packages www.deltaww.com Delta Products VFD CP2000 Bypass Control Packages The Delta Products VFD CP2000 Bypass Control Packages are designed for the Delta Products
L300P Inverter Specifications
L300P Inverter Specifications Tables for 200V class inverters Note that General Specifications on page 1 9 covers all L300P inverters, followed by footnotes for all specifications tables. Seven 200V models
A. Provide variable frequency drives to operate variable torque loads as shown on the Drawings and as specified herein.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 90 71 PART 1 GENERAL 1.01 DESCRIPTION A. Provide variable frequency drives to operate variable torque loads as shown on the Drawings
J1000 D E F I 1000 J1000 J1000 J1000 J1000
Compact Inverter SERIES J1000 GB D E F I 1000 J1000 J1000 J1000 J1000 The J-Type YASKAWA Inverter Drive Technology Contents Page 2 Experience & Innovation A leader in Inverter Drives technology Page 3
VFD E Series. Features
VFD E Series Output Frequency : 0.1 ~ 600 Hz. Built in PLC Function 500 Step program in Ladder Language. Side by side installation. Easy maintenance. Modular & Compact Design. Built-in MODBUS communication.
Sensorless Vector Drives
STANDARD PRODUCTS Sensorless Vector Drives SG SERIES STANDARD DUTY / HEAVY DUTY RATINGS Variable Torque: 7.5 to 700HP @ 460V 7.5 to 40HP @ 2V Standard Duty: 7.5 to 600HP @ 460V 7.5 to 40HP @ 2V Heavy Duty:
VS1PFB 230V, 50/60 Hz, 3-Phase
Farm Duty Unit Handling Brake 200 & 575 Volt Pump and Fan Bypass AC Drive 7.5 thru 40 Hp 7.5 thru 125 Hp & Controls 230 VAC 460 VAC 3 Phase - 50/60 Hz 3 Phase - 50/60 Hz Applications: Pump and Fan AC Drive
HVAC Products. Introducing the SED2 Variable Frequency Drives
HVAC Products Introducing the SED2 Variable Frequency Drives Designed Specifically for HVAC Applications From a global leader in drives technology and innovation, now comes a drive specifically configured
690+ Series Integrator
690+ Series Integrator V/F, Sensorless, Vector Inverter from 1 to 1600 DESCRIPTION The 690+ Series is a single range of AC drives designed to meet the requirements of all variable speed applications from
J1000. Compact Inverter Series.
J1000 Compact Inverter Series www.yaskawa.eu.com Focus on Application Customer orientation and application focus two attributes of machine equipment YASKAWA offers with its J1000 compact inverter drive
RVS-DX Digital Reduced Voltage Motor Starter
RVS-DX Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
2.3. Adjustable Frequency Drives. Contents. Standards and Certifications
Contents Selection................ Product Selection....................... Accessories........................... Technical Data and Specifications.......... Dimensions........................... Page
ADJUSTABLE FREQUENCY CRANE CONTROLS
IMPULSE G+ MINI ADJUSTABLE FREQUENCY CRANE CONTROLS The IMPULSEG+ Mini from Magnetek continues our history of providing the most reliable and cost-effective adjustable frequency crane controls available.
2122H. Arm Field Arm Field 1/8-1/ / /8-1/ / / /
Non-Regen Drives Non-regenerative drives are typically used on applications which primarily motor in one direction and stopping is achieved through friction or infrequent use of a dynamic braking resistor.
RVS-DN Digital Reduced Voltage Motor Starter
RVS-DN Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
501E. European Stock Product Catalog. Motors & Drives. Bearings & Power Transmission. Servo & Motion Control.
Effective: May 2010 501E European Stock Product Catalog & Bearings & Power Transmission Servo & Motion Control www.baldor.eu CONTENTS AC...2 AC MOTORS - IEC... 4 AC MOTORS - NEMA... 7 DC &...10 DC MOTORS
Honeywell CORE Drive FEATURES APPLICATION SPECIFICATION DATA
Honeywell CORE Drive SPECIFICATION DATA FEATURES APPLICATION The new Honeywell VFD CORE Drive addresses the need to save time for installation, and provides the lower total installed costs with years of
Fincor DC Drives. Flexible & Powerful TYPICAL APPLICATIONS. Conveyor Rugged. Extruder Reliable. Conveyor Simple. Mixer Flexible
DC Drives Flexible & Powerful single-phase DC drives provide a complete family solution from the compact Series 2120 chassis drive to the powerful Series 2230 and it s feature rich application specific
ALTIVAR FLEX58 Chassis Drive Controller Product Selection
ALTIVAR FLEX58 Chassis Drive Controller Product Selection Class 8806 CONTENTS Description Page General Information and Selection....................................... 2 Specifications and Ratings...........................................
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M600 features Easy click-in keypad
Data Bulletin. ALTIVAR FLEX58 Chassis Drive Controllers Class 8806 INTRODUCTION DESIGN CONCEPT. Bulletin No. 8806DB0102 August 2001 Raleigh, NC, USA
Data Bulletin Raleigh, NC, USA ALTIVAR FLEX58 Chassis Drive Controllers Class 8806 INTRODUCTION The ALTIVAR FLEX58 chassis drive controller offers OEMs, panel builders, integrators, and users a unique
Quick guide. Plug-in fans GPPM with FC101_106 August 2014
Quick guide Plug-in fans GPPM with FC101_106 August 2014 Fläkt Woods permanent magnet motors and speed controllers for plug fans GPPM 1. General Fläkt Woods offers a wide range of permanent magnet motors
Drives. Section Rev. 1/10. Publications and Reference: See Section 17 for a complete list of additional product-related publications
AF-60LP Micro Drive Product Description...16-2 Product Number System Diagram...16-2 Pricing, Dimensions and Weights...16-3 Options, Accessories, and Replacement Parts...16-4 Dynamic Braking Resistors...16-5
MULTI LANGUAGE KEYPAD
FREQUENCY INVERTER MULTI LANGUAGE KEYPAD E 800 E 2000 EP 66 EM 30 Universal remote keypad- display unit, compatible with all EURA Drives products Robust, for any critical environments, IP66 waterproof
Low voltage AC drives
General machinery drives Main features and dimensions Unique features Fast and extensive I/O PID control Application macros Many installation possibilities 200 to 480 V, 1-phase or 3-phase More value for
Standard Features 200-600V, 50/60Hz input power supply Built-in run rated (AC1) By-pass contactor up to 820 A * Rated 450% current Conformal coated circuit board Voltage ramp or current limit start modes
AQUAVAR Intelligent Pump Controller TECHNICAL BROCHURE BCPAQIPC R2
AQUAVAR Intelligent Pump Controller TECHNICAL BROCHURE BCPAQIPC R2 INTRODUCTION The Aquavar Intelligent Pump Controller from utilizes an all new Aquavar platform, and combines it with over 20 years of
NEMA 1, NEMA 4X and Chassis Mount Adjustable Speed Controls for DC Motors
Made in the U.S.A. NEMA 1, NEMA 4X and Chassis Mount Adjustable Speed Controls for DC Motors Nema Enclosed DC Control Specifications Catalog Number BC140 or Features BC138 BC139 BC140-FBR BC154 BC160 BCWD140
V1000. Inverter Series.
V1000 Inverter Series www.yaskawa.eu.com One for all The V1000 is a general purpose inverter drive covering the demands of a wide field of applications. Simple duties as well as requirements of complex
V1000 Inverter Series
V1000 Inverter Series www.yaskawa.eu.com One for all The V1000 is a general purpose inverter drive covering the demands of a wide field of applications. Simple duties as well as requirements of complex
Unidrive M700 Class leading performance with onboard real-time Ethernet
Unidrive M Class leading performance with onboard real-time Ethernet. kw -.8 MW Heavy Duty (. hp -, hp) V V V 9 V Unidrive M features Easy click-in keypad connection Range of multi-language LCD keypads
SJ300 Inverter Specifications
SJ300 Inverter Specifications Tables for 200V class inverters Note that General Specifications on page 1 9 covers all SJ300 inverters, followed by footnotes for all specifications tables. The 200V models
SINUS PENTA 2T/4T SINUS PENTA 2T/4T
SINUS PENTA 2T/4T SINUS PENTA 2T/4T Technical Highlights One product, 5 integrated functions - IFD (Inverter Frequency Drive): vector modulation function for general-purpose applications (V/F pattern).
Drives. Section Rev. 7/13. Prices and data subject to change without notice
AF-60LP Micro Drive Product Description...15-2 Product Number System Diagram...15-2 Pricing, Dimensions and Weights...15-3 Options, Accessories, and Replacement Parts...15-4 Dynamic Braking Resistors...15-5
PowerFlex 700. Wall Mount - IP20, NEMA/UL Type 1. at a glance
PowerFlex 700 The PowerFlex 700 offers outstanding performance in an easy-to-use drive that covers a wide range of horsepower ratings. This drive is designed to control three-phase induction motors in
Drive Electronics \ Drive Automation \ System integration \ Services MOVITRAC LTP. Catalog. Edition 03/ / EN
Drive Electronics \ Drive Automation \ System integration \ Services MOVITRAC LTP Edition 03/2009 Catalog 16798015 / EN SEW-EURODRIVE Driving the world 1 Important Notes... 4 1.1 Structure of the safety
www. ElectricalPartManuals. com Instruction Bulletin ALTIVAR FLEX58 TRX Adjustable Speed Chassis Drive Controllers Installation Guide
Instruction Bulletin ALTIVAR FLEX58 TRX Adjustable Speed Chassis Drive Controllers Installation Guide Retain for future use. 30072-450-47A July 2002 Raleigh, NC, USA HAZARDOUS VOLTAGE Read and understand
SED2. Variable Frequency Drives. with Conventional Bypass Options. Variable Frequency Drives. Description. Features F-9.
SED2 with Conventional Bypass Options Important Note: VD products are only available through authorized distribution channels. To locate an authorized distributor, please contact a Siemens Building Technologies
JC-VSD FP Series II Drives Product Bulletin 1
JC-VSD FP Series II Drives Product Bulletin Code No. LIT-12012081 Issued May 2017 The Johnson Controls VSD FP Series II provides the advanced technology and features of the Johnson Controls VSD Series
Softstarters. Softstarters Type SSM Medium voltage ,800V 1
Medium voltage 2300 13,800V 1 Description Fused disconnect switch with blown fuse indicators and door safety interlocks rated for load break/fault make with automatic grounding arm Inline isolation vacuum
Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning.
Introduction OPERATING INSTRUCTIONS: MCD REMOTE OPERATOR Order Codes: 175G94 (for MCD 2) 175G361 + 175G9 (for MCD 5) 175G361 (for MCD 3) 1. Introduction 1.1. Important User Information Observe all necessary
sinamics SINAMICS G110 Variable Speed Drives 0.12 kw to 3 kw SINAMICS G110 Short Form 2004
Variable Speed Drives 0.12 kw to 3 kw Short Form 2004 sinamics SINAMICS Variable Speed Drives 0.12kW to 3kW Product Information Pricing The is a Variable Speed Drive with basic functions for a variety
CTi Automation - Phone: Fax: Web:
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net The control & protection you expect in an innovative soft starter design... Flexibility
ABB component drives ACS150, 0.5 to 5 Hp
ABB component drives ACS150, 0.5 to 5 Hp Technical Catalog BUSINESS PROFILE INDUSTRIES PRODUCTS APPLICATIONS EXPERTISE PARTNERS SERVICES Contents Choice 1: Simply contact your local ABB drives sales office
SD700FR. Regenerative Active Front End VARIABLE SPEED DRIVES POWER ELECTRONICS / SD700 SERIES 4 QUADRANT. icool
FR VARIABLE SPEED DRIVES Regenerative Active Front End icool 4 QUADRANT POWER ELECTRONICS / SD700 SERIES FR SD700FR SERIES goes one step ahead keeping the family unique characteristics. Based on the latest
USERS MANUAL MCD REMOTE OPERATOR
USERS MANUAL MCD REMOTE OPERATOR Order Code: 175G9004, 175G3061 Contents Contents Introduction...2 Important User Information...2 General Description...2 Symbols Used in this Manual...2 Installation...3
Regenerative DC Common Bus Supply
Regenerative DC Common Bus Supply The Regenerative DC Common Bus Supply supplies both motoring and regenerative current to the DC bus of one or more AC drives without the need of rectifier front end in
ALTIVAR 58 AC Drives
Class 8806 / 8839 / 8998 CONTENTS Schneider Electric Brands Page ALTIVAR 58 AC Drives............................................... 3 Drives Overview...................................................
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options Description The BT300 Conventional Bypass is a companion package for the family of BT300 HVAC Drives. For information on the family of BT300 HVAC
The smd frequency inverter Compact, powerful, without compromise simply smart
The smd frequency inverter Compact, powerful, without compromise simply smart smart micro drive The compact smd for large tasks 2 Do you work with digital and analog inputs, preset speeds or a display
Unidrive M400 Fast set-up and diagnostics with real-text display, integrated PLC and safety inputs
Unidrive M400 Fast set-up and diagnostics with real-text display, integrated PLC and safety inputs 0.25 kw - 110 kw (0.33 hp - 150 hp) 100 V 200 V 400 V 575 V 690 V Unidrive M400 features Optional AI-485
ROBICON W120 enclosed drive
SINAMICS Drives ROBICON W120 enclosed drive 1 HP to 200 HP Introduction This technical data sheet provides a short overview of the most important characteristics of the ROBICON W120 enclosed standard 6-pulse
Altivar 31 AC Drives. Simply Smart! For 3-phase asynchronous motors from 0.25 to 20 HP
Altivar 31 AC Drives Simply Smart! For 3-phase asynchronous motors from 0.25 to 20 HP T A complete offer: Wide choice of voltage ranges Single-phase 208 to 240 V. 3-phase 208 to 240 V. 3-phase 400 to 460
The multi-purpose Industrial AC Drive that solves 90% of all stand-alone and system variable speed motor needs
The multi-purpose Industrial AC Drive that solves 90% of all stand-alone and system variable speed motor needs Whether your applications are simple fans or pumps, or more complex applications such as web
Applications: Conveyors, machine tools and other applications requiring adjustable speed. Mult. Sym.
HVAC Farm Duty Fractional Horsepower DC Speed Controls for PMDC DC & Controls 1/15 thru 1/4 115 VAC Single Phase 50/60 Hz. Applications: Conveyors, machine tools and other applications requiring adjustable
Symbol Input rating Symbol 2 Three-phase, 200 ~ 230V N 4 Three-phase, 380 ~ 480V. None. Loader. Graphic. Loader
is7 Variable Frequency Drive / Inverter High Torque Performance and Precise VFD 3 phase 0.75~22kW(1~30HP), 200~230V 3 phase 0.75~160kW(1~250HP), 380~480V Constant torque / Variable torque dual rating Selectable
300% Motor full load amps at 80 seconds, 400% Motor full load amps at 35 seconds
Digital Soft Start Controls 9 thru 900 Amps 208-460V 50/60 Hz. 9 thru 900 Amps 208-575V 50/60 Hz. Applications: Controlled ramp start and stop, minimize spillage in material handling, reduced water hammer
These documents contain additional information concerning related products from Rockwell Automation.
Additional Resources These documents contain additional information concerning related products from Rockwell Automation. Title PowerFlex 750-Series Drive Installation Instructions PowerFlex 750-Series
300% Motor full load amps at 80 seconds, 400% Motor full load amps at 35 seconds
Digital Soft Start Controls Soft Starters & 9 thru 900 s 208-460V 50/60 Hz. 9 thru 900 s 208-575V 50/60 Hz. Farm Duty Applications: Controlled ramp start and stop, minimize spillage in material handling,
SMVector Drive. Flexible, simple, economical Flexible, simple, economical
Drive Flexible, simple, economical Flexible, simple, economical SMV NEMA 4X (IP65) SMV NEMA 1 (IP31) Our promise Commitment to Value The finest product at the best price is serious business. It takes continuous
Large Drive. Variable Speed Control is Just the Beginning. Franklin FastApp Firmware. Variable Speed Control NEMA. Standard Features (Enclosed Drives)
Large Drive Variable Speed Control is Just the Beginning NEMA Franklin FastApp Firmware Pre-configured for easy operation and optimal performance PSI unit display Sleep and wake up functions Lubrication
PowerFlex 750-Series AC Drives
Technical Data PowerFlex 7-Series AC Drives Original Instructions Topic Page Additional Resources 2 Product Overview 2 Certifications and Specifications 6 Design Considerations 11 Fuse and Circuit Breaker
Fincor Series 2230 MKII/2240
Fincor Series 2230 MKII/ Fincor Series 2200 regenerative drives are ideal for your more demanding applications. They feature flexibility with ratings up to 5 horsepower. The Series 2230 MKII offers new
INVEOR "Smart connections." on five levels
INVEOR "Smart connections." on five levels 1 The Inveor 3 Operation and observation IP65 protection class Integrated soft PLC Pre-fitted cable glands Fan-free design up to 7.5 kw Robust and vibration-resistant
Series 22H Line Regenerative Vector Drive
Series 22H Line Regenerative Vector Drive Design Specifications Process follower ±5VDC 0-5 VDC, ±10VDC, 0-10 VDC, 4-20mA, digital via keypad or optional RS232/485 Linear or S-curve deceleration Controlled
High performance Vector Control. Ratings. System configuration
System configuration High performance Vector Control Low harmonic or regenerative drive IP54 full range Compact design and robustness Built-in filter (according to C3 class) Built-in fuses (from 200 kw)
ABB Component Drives ACS150, 0.5 to 5 Hp
ABB Component Drives ACS150, 0.5 to 5 Hp Technical Catalog BUSINESS PROFILE INDUSTRIES PRODUCTS APPLICATIONS EXPERTISE PARTNERS SERVICES Contents Choice 1: Simply contact your local ABB drives sales office
SECTION 16483C ADJUSTABLE FREQUENCY DRIVE - CLEAN POWER (CPX)
ADJUSTABLE FREQUENCY DRIVE - CLEAN POWER (CPX) PART 1 GENERAL 1.01 SCOPE A. This specification describes the electrical, mechanical, environmental, agency and reliability requirements for three-phase,
SMS PRODUCT CATALOGUE
SMS PRODUCT CATALOGUE CONTENTS 1 TAKEDO 3VF-NXP - LIFT INVERTER Page 3 2 TAKEDO 3VF-V20 - OPEN LOOP LIFT INVERTER Page 6 3 TAKEDO ENERGY - DYNAMIC BRAKING REGENERATIVE UNIT Page 7 4 HYDROVERT VVVF FOR
A Compact, Liquid-Cooled Variable Speed Drive for High Horsepower Applications
A Compact, Liquid-Cooled Variable Speed Drive for High Horsepower Applications The Reliance Electric LiquiFlo AC drive combines high-performance variable speed drive technology with a patented liquid-cooling
ADJUSTABLE FREQUENCY CONTROLS SENSORLESS VECTOR CONTROL. Dual Rating. Technologies Inc. mgitech.com NRTL/C CERTIFIED
ADJUSTABLE FREQUENCY CONTROLS SENSORLESS VECTOR CONTROL Dual Rating NRTL/C CERTIFIED Technologies Inc. mgitech.com Sensor/Sensorless Vector Control Dual current rated for constant and variable torque Auto
Low Profile DC Power Supply with Zero Voltage Soft Switching
Sorensen XFR Series Low Profile DC Power Supply with Zero Voltage Soft Switching Analog programming Zero voltage soft switching Constant voltage or constant current operation with automatic crossover and
Chapter 1: Getting Started User Manual Overview...1 2
Getting Started Chapter 1 Table of Contents Chapter 1: Getting Started User Manual Overview.........................................1 2 Overview of this Publication.........................................
RM B. Features. Drive Model Number Scheme. A RM6 Product Series
Features RM6 series are suitable for constant and variable torque loads (mixer, conveyor, fan, pump, etc.) Overload capacity with 150% drive s rated output current for 1 min can sustain heavy load conditions
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION MOTORS, STARTERS & DRIVES
PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. Coordinate starter needs for mechanical equipment prior to 50% CD and confirm again for 100% CD submittal. B. Coordinate temperature controls requirements
PKS-FD Servo System
PKS-FD123-01 Servo System FEATURES 24-70VDC of 0.32 Nm Power Ratings up to 100 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6500 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available Position,
Low voltage AC drives. ABB micro drives ACS to 3 hp/0.18 to 2.2 kw Catalog
Low voltage AC drives ABB micro drives ACS55 0.25 to 3 hp/0.18 to 2.2 kw Catalog ACS55 IP20 Overview ACS55 micro drives are designed for use in a wide variety of simple machinery applications where only
VSD Series II Variable Speed Open Drives
VSD Series II Variable Speed Open Drives Product Bulletin Code No. LIT-12011824 Issued May 5, 2015 Refer to the QuickLIT website for the most up-to-date version of this document. The Johnson Controls VSD
Hydrovar and Packaged Hydrovar
Hydrovar and Packaged Hydrovar MOTOR MOUNT VARIABLE SPEED PUMP CONTROLLER AND INTEGRATED PUMP PACKAGES BRHYDROVAR R3 Goulds Water Technology Hydrovar and Packaged Hydrovar Hydrovar Variable Speed Drives
AS THE TIME GOES BY WE HAVE CONSTANTLY MADE QUALITY A TOP PRIORITY
PRODUCTS BROCHURE AS THE TIME GOES BY WE HAVE CONSTANTLY MADE QUALITY A TOP PRIORITY Since we made our first AC drive 23 years ago, we have always earned the crown from our customers as the most reliable
TECHNICAL BROCHURE BAQUACPC. Aquavar CPC VARIABLE SPEED CENTRIFUGAL PUMP CONTROLLER
TECHNICAL BROCHURE BAQUACPC Aquavar CPC VARIABLE SPEED CENTRIFUGAL PUMP CONTROLLER Introduction The Aquavar CPC (Centrifugal Pump Controller) from incorporates the latest state-of-the-art Aquavar technology,
TRIPS AND FAULT FINDING
WWW.SDS.LTD.UK 0117 9381800 Trips and Fault Finding Chapter 6 6-1 TRIPS AND FAULT FINDING Trips What Happens when a Trip Occurs When a trip occurs, the drive s power stage is immediately disabled causing
Applications: General purpose industrial use with permanent magnet or shunt wound DC motors. Description
NEMA 1 Enclosed DC Controls for PMDC and Shunt Wound DC & Controls 1/100 thru 2 Hp 115/230 VAC Single Phase 50/60 Hz. Applications: General purpose industrial use with permanent magnet or shunt wound DC
KNC-PKS-FD S-AAK-DKH
KNC-PKS-FD123-02 - Servo System FEATURES 24-70VDC of 90 oz-in Power Ratings up to 200 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6000 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available
ATS22D88Q soft starter-ats22-control 220V-power 230V (22kW)/ V(45kW)
Product datasheet Characteristics ATS22D88Q soft starter-ats22-control 220V-power 230V (22kW)/400...440V(45kW) Complementary Assembly style Function available Supply voltage limits Main Range of product
Overvoltage Suppression F7 Drive Software Technical Manual
Overvoltage Suppression F7 Drive Software Technical Manual Software Number: VSF11015X, Drive Models: CIMR-F7UXXXXXX-062, CIMR-F7U40750F-145. Document Number: TM.F7SW.062, Date: 09/17/2010, Rev: 10-09 This
PowerFlex 700 Adjustable Frequency AC Drive
Technical Data PowerFlex 700 Adjustable Frequency AC Drive Topic Page Product Overview 2 Certifications and Specifications 7 Design Considerations 12 Drive, Fuse and Circuit Breaker Ratings 24 Cable Recommendations
1/6 through 5 HP Adjustable Speed, DC Motor Controllers
1/6 through 5 HP Adjustable Speed, DC Motor Controllers 1/6-5 HP 115 or 230 V, Single Phase - Reconnectable Four Quadrant Regenerative Selectable Deadband AC Line Starting DC Tachometer Feedback Run Contact
PowerFlex 750-Series AC Drives
Technical Data PowerFlex 7-Series AC Drives Original Instructions Topic Page Summary of Changes 2 Additional Resources 2 Product Overview 3 Certifications and Specifications 8 Design Considerations 4 Fuse
VSD Series II Variable Speed Enclosed IntelliPass and IntelliDisconnect Drives
VSD Series II Variable Speed Enclosed IntelliPass and IntelliDisconnect Drives Product Bulletin Code No. LIT-12011814 Issued February 4, 2013 The Johnson Controls VSD Series II Variable Speed Enclosed
SED2 VFD NEMA Type 3R and Type 3R Harsh Environment (3RHE) Bypass
SED2 VD NEMA Type 3R and Type 3R Harsh Environment (3RHE) Bypass Description The NEMA Type 3R Bypasses are companion packages for the family of SED2 Variable requency Drives (VD). NEMA Type 3R/3RHE enclosed