Motor driven diaphragm metering pump P D S V N PUMP HEAD MATERIAL. O RING V FKM B D Dutral LUBRICANT TYPE
|
|
|
- August Carroll
- 5 years ago
- Views:
Transcription
1 Motor-driven diaphragm dosing pump, mechanical actuated, PRIUS combines efficiency and chemical resistance to a wide capacity range for an extensive number of applications. ATEX II 2 G c IIB T3, T4 II 2 D IIIC T125 C, resp T135 C Three phase motor power supply Spring return mechanism Manual degassing valve Identification code CIRCUIT CUSTOM. PACKAGING INTERNAL P D S V N BAR CAPACITY 50 Hz 60 Hz bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar S L/H PUMP HEAD MATERIAL SS COLOR & POWER SUPPLY A 0,18Kw G - B14 ATEX GAS B 0,25Kw G - ATEX DUST C 0,37Kw G - ATEX DUST D 0,37Kw G - B14 ATEX GAS REDUCTION GEAR 1 8:1 2 15:1 3 10:1 4 20:1 5 40:1 O RING V FKM B D Dutral LUBRICANT TYPE BRAND MODEL MOBIL MOBILGEAR 632 SHELL OMALA OIL 320 BP ENERGOL GR-XP 320 IP MELLANA OIL 320 ESSO SPARTAN EP 320 AGIP BLASIA 320
2 PRIUS SerieS - 50 Hz / 3-PHASE Features Aluminium enclosure (epoxy coating) Spring return mechanism Power supply / V - /Y Environment temperature: C ( F) Chemical temperature with SS pump head: C ( F)* Installation class... II Pollution level... 2 Audible noise dba (± 5 db) Protection degree... IP 55 Max suction height... 3 m Oil capacity... 0,3 lt (Refer to Lubricant type table) * The specified temperature can be exceeded temporarily (max 15 ) for sterilization or flushing with hot water.
3 PRIUS - 50 Hz Power supply / V - /Y PRIUS 50 Hz - ATEX GAS PRESSURE CAPACITY REDUCTION GEAR PUMP HEAD MODEL , ,18 kw 8 : 1 NM R1/2 G1/ , ,37 kw 8 : 1 TM R3/4 G3/ , , ,37 kw 8 : 1 TM R3/4 G3/ , , ,37 kw 8 : 1 TM R3/4 G3/ ,9 94 0,18 kw 15 : 1 NM R1/2 G1/ ,8 94 0,37 kw 15 : 1 TM R3/4 G3/ , ,7 94 0,37 kw 15 : 1 TM R3/4 G3/ , ,8 94 0,37 kw 15 : 1 TM R3/4 G3/ ,3 70 0,18 kw 20 : 1 NM R1/2 G1/ ,1 70 0,37 kw 20 : 1 TM R3/4 G3/ , ,9 70 0,37 kw 20 : 1 TM R3/4 G3/ , ,4 70 0,37 kw 20 : 1 TM R3/4 G3/ , ,18 kw 40 : 1 NM R1/2 G1/ , ,18 kw 40 : 1 NM R1/2 G1/2 PRIUS 50 Hz - ATEX DUST PRESSURE CAPACITY REDUCTION GEAR PUMP HEAD MODEL , ,25 kw 8 : 1 NM R1/2 G1/ , ,37 kw 8 : 1 TM R3/4 G3/ , , ,37 kw 8 : 1 TM R3/4 G3/ , , ,37 kw 8 : 1 TM R3/4 G3/ ,9 94 0,25 kw 15 : 1 NM R1/2 G1/ ,8 94 0,37 kw 15 : 1 TM R3/4 G3/ , ,7 94 0,37 kw 15 : 1 TM R3/4 G3/ , ,8 94 0,37 kw 15 : 1 TM R3/4 G3/ ,3 70 0,25 kw 20 : 1 NM R1/2 G1/ ,1 70 0,37 kw 20 : 1 TM R3/4 G3/ , ,9 70 0,37 kw 20 : 1 TM R3/4 G3/ , ,4 70 0,37 kw 20 : 1 TM R3/4 G3/ , ,25 kw 40 : 1 NM R1/2 G1/ , ,25 kw 40 : 1 NM R1/2 G1/2
4 PRIUS SERIES - 60 Hz / 3-PHASE Features Aluminium enclosure (epoxy coating) Spring return mechanism Power supply: V - Y connection Environment temperature: C ( F) Chemical temperature with SS pump head: C ( F)* Installation class...ii Pollution level...2 Audible noise...78 dba (± 5 db) Protection degree...ip 55 Max suction height...3 m Oil capacity...0,3 lt (Refer to Lubricant type table) * The specified temperature can be exceeded temporarily (max 15 ) for sterilization or flushing with hot water.
5 PRIUS - 60 Hz Power supply V - Y PRIUS 60 Hz - ATEX GAS , ,18 kw 10 : 1 NM R1/2 G1/ , ,37 kw 10 : 1 TM R3/4 G3/ , , ,37 kw 10 : 1 TM R3/4 G3/ , , ,37 kw 10 : 1 TM R3/4 G3/ ,1 87 0,18 kw 20 : 1 NM R1/2 G1/ ,2 87 0,37 kw 20 : 1 TM R3/4 G3/ , ,8 87 0,37 kw 20 : 1 TM R3/4 G3/ , ,4 87 0,37 kw 20 : 1 TM R3/4 G3/4 PRIUS 60 Hz - ATEX DUST PUMP HEAD PRESSURE CAPACITY REDUC- MODEL TION GEAR PUMP HEAD PRESSURE CAPACITY REDUC- MODEL TION GEAR , ,25 kw 10 : 1 NM R1/2 G1/ , ,37 kw 10 : 1 TM R3/4 G3/ , , ,37 kw 10 : 1 TM R3/4 G3/ , , ,37 kw 10 : 1 TM R3/4 G3/ ,1 87 0,25 kw 20 : 1 NM R1/2 G1/ ,2 87 0,37 kw 20 : 1 TM R3/4 G3/ , ,8 87 0,37 kw 20 : 1 TM R3/4 G3/ , ,4 87 0,37 kw 20 : 1 TM R3/4 G3/4
6 Dimensions DIMENSIONS (mm) NM pump head (SS) TM pump head (SS) A B C L G H I 97,5 110 F E 125,2 125,2 D 108,6 108,6 fixing holes 8 8 Exploded view
PRIUS Motor driven diaphragm metering pump
Motor-driven diaphragm dosing pump, mechanical actuated, PRIUS combines efficiency and chemical resistance to a wide capacity range for an extensive number of applications. Single or three phase motor
PRIUS D Motor driven diaphragm metering pump
Motor-driven diaphragm dosing pump, mechanical actuated, PRIUS combines efficiency and chemical resistance to a wide capacity range for an extensive number of applications. Single or three phase motor
PRIUS D MF AP. Multi-Function motor driven diaphragm metering pump P D M F K V N PUMP HEAD MATERIAL PVDF SS
Motor-driven diaphragm dosing pump, mechanical actuated, PRIUS combines efficiency and chemical resistance to a wide capacity range for an extensive number of applications. Multifunction motor pump with
PRIUS D OPERATING MANUAL MOTOR DRIVEN DIAPHRAGM METERING PUMP SPRING RETURN MECHANISM PVDF PUMP HEAD PP PUMP HEAD SS PUMP HEAD
PRIUS D EN PVDF PUMP HEAD PP PUMP HEAD SS PUMP HEAD MOTOR DRIVEN DIAPHRAGM METERING PUMP SPRING RETURN MECHANISM OPERATING MANUAL THIS OPERATING INSTRUCTIONS CONTAINS SAFETY INFORMATION THAT IF IGNORED
HL - MHL SPA SOCIETÀ ITALIANA TRASMISSIONI INDUSTRIALI. INSTALLATION, OPERATION and MAINTENANCE MANUAL
SPA SOCIETÀ ITALIANA TRASMISSIONI INDUSTRIALI HL - MHL TM INSTALLATION, OPERATION and MAINTENANCE MANUAL 03.2005 Table of contents Contacting our service department... 4 Operation... 5 Maintenance... 6
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E Pump Drives - Gearboxes Mechanical Dry Clutches Hydraulic Clutches Pump Adaptors CONTENTS Pump Drives AM
USE AND MAINTENANCE BOOKLET DIAPHRAGM PUMP SERIES. SuperMicroLib-2. Pag. 1 a 7
USE AND MAINTENANCE BOOKLET DIAPHRAGM PUMP SERIES SuperMicroLib-2 GB Pag. 1 a 7 Description: SuperMicroLib-2 pumps are manufactured by CAFFINI CIPRIANO SRL based at N 46 Via G. Di Vittorio, Lemignano di
USE AND MAINTENANCE BOOKLET DIAPHRAGM PUMP LIBELLULA 1/4"
GB USE AND MAINTENANCE BOOKLET DIAPHRAGM PUMP LIBELLULA 1/4" 1 Description: Libellula pumps are manufactured by CAFFINI CIPRIANO SRL based at N 46 Via G. Di Vittorio, Lemignano di Collecchio 43044 (Parma),
SERIES R - MD MOR & GOR
SERIES R - MD MOR & GOR CHARACTERISTICS OPTIONS Aluminium alloy construction Surface protection treatment (anodising, only for ATEX 2 versions) Available in monoblock execution (MOR) and with coupling
Operating Instructions
Operating Instructions Table of contents Table of contents... 1 1. Declaration... 1 2. Warranty and liability... 2 3. Gear description... 2 4. Gear types... 2 5. Safety... 3 5.1 General safety information...
Your Partner in Solutions 24/7. EMAW Worm Gearboxes. Tel: Fax: Web:
Your Partner in Solutions 24/7 EMAW Worm Gearboxes Tel: 01902 601 403 Fax: 01902 601 408 Email: sales@emag-ltd.co.uk Web: www.emag-ltd.co.uk Worm Gear Units - Installation & Lubrication To install the
Operating, lubrication and maintenance instructions for gearboxes and motors
Operating, lubrication and maintenance instructions for gearboxes and motors Index of contents General notes... 3 Worm gears... 4 Helical bevel gears, helical gears and slip-on gears... 5 Helical Bevel
Chemical dosing and control equipments
WWW.EMEC.IT Chemical dosing and control equipments CONSTANLY EVOLVING DISCOVER EMEC Since 1982 industrial footing has bred constant improvementsin all our products, expanding range and functions. Our range
Section 5. Maintenance. Risk of Burns. Relieving Pressure. Important when Using Cleaning Agents. Maintenance 5-1
5-1 Section 5 WARNING: Allow only qualified personnel to perform the following tasks. Observe and follow the safety instructions in this document and all other related documentation. NOTE: is an important
Service instructions. Table of contents. DMX and DMH
Service instructions DMX and DMH Table of contents 1. Type identification... 2 1.1 Nameplate... 2 2. Type key... 3 2.1 Torques and lubricants... 4 2.2 Lubricants... 4 3. Service tools... 5 4. Spare parts...
Planetary Gearboxes. cat planetarios 200 pags 2008.in1 1 31/03/ :49:57
Planetary Gearboxes cat planetarios 200 pags 2008.in1 1 31/03/2009 10:49:57 Table of contents Description Page Symbols, units of measure and description 4-4 Technical characteristics and general information
CHC SERIES HELICAL GEAR UNITS
CHC SERIES HELICAL GEAR UNITS INTRODUCTION CHC series helical gear units is a new generation product, which designed basing on the modular system. It can be connected respectively with motors such as standard
NMRV - MCV - NRV NMRV+NMRV PC+NMRV
MAINTENANCE AND OPERATING INSTRUCTIONS FOR WORM GEAR REDUCERS AND GEARMOTORS SERIES: NMRV - MCV - NRV NMRV+NMRV PC+NMRV GB NMRV-UM-9 99/01 rev.15.07.99 2 Warehouse storage When moving the unit, care should
7.3 Drive Chain Q
7 Maintenance of Drive & Brakes Drive Chain Q 409 452 7.3 Drive Chain Q 409 452 1 Description and Mode of Operation The drive chain (1) is a duplex chain that transmits the driving torque to the main shaft
Ex Pressostat EXPK 944/947/953. Applications. Features
Ex Pressostat Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. x Applications x II 2 G / D Features
RAINTIGHT ENCLOSURE. mecair CSN
mecair RAINTIGHT ENCLOSURE GENERAL CHARACTERISTICS Operating temperature Weight 20 C/+60 C 5 3.5 kg 8 5 kg 12 7 kg CONSTRUCTION FEATURES ENCLOSURE Cover Diecast aluminium (anodised) Base Extruded aluminium
CHO HELICAL-HYPOID GEAR UNITS
CHO HELICAL-HYPOID GEAR UNITS Kuželočelní převodovky INTRODUCTION CHO helical hypoid gear units have been conceived to be used instead of worm gearboxes where high efficiency is requested, especially with
ATTENTION: Industrial machinery for professional use. These instructions are for qualified personnel USE AND MAINTENANCE MANUAL
USE AND MAINTENANCE MANUAL PUMPING HEADS ATTENTION: Industrial machinery for professional use. These instructions are for qualified personnel METERING PUMP WITH SPRING RETURN SR Series mod. B HYDRAULIC
CYLINDRICAL CAM INDEXING ROTARY TABLES IR TABLES HEAVY SERIES IR IR IR 2001 COLOMBO FILIPPETTI SPA
CYLINDRICAL CAM INDEXING IR HEAVY SERIES COLOMBO FILIPPETTI SPA Sealed electrowelding gear housing. Indexing output plate with fixed central through hole. Input shaft and worm screw on opposite taper roller
GEAR BOXES AND MOTORS
GEAR BOXES AND MOTORS page 5 page 25 page 56 page 58 page 88 page 121 page 136 page 141 page 153 60 YEARS OF HISTORY The goal pursued by Chiaravalli during more than 60 years of history is to become the
DOCUMENTATION - INSTALLATION _ MAINTENANCE
Bevel gears DOKUMENTATION BETRIEBS_ UND WARTUNGSANLEITUNG DOCUMENTATION - INSTALLATION _ MAINTENANCE FOR BEVEL GEARS 1 Bevel gears Radial forces Permissible radial load (stress) on input (d 1 ) and output
W SERIES TECHNICAL CATALOGUE
WHEEL MOTOR W SERIES TECHNICAL CATALOGUE W 05 INDEX GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Pag. 2 W 05 G100 (Fixed displacement) (SIZE AND TECHNICAL DATA) -
Floodlight LED Series 6125
www.stahl.de > Floodlight Zones 1, 2 and 21, 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Enclosure made of sheet steel single powder coated
314 ORDINARY MAINTENANCE MANUAL FOR. PGA series VERTICAL MOUNTING POSITION. Release A02/15
314 www.comerindustries.com ORDINARY MAINTENANCE MANUAL FOR PGA series VERTICAL MOUNTING POSITION Release A02/15 INDEX General information...page 3 Ordinary maintenance...page 4 Oil lubricant replacement...page
INSTRUCTIONS FOR USE FACE GEARBOXES
INSTRUCTIONS FOR USE FACE GEARBOXES TNC MTC-TC KTM ES Declaration of Conformity Producer: TOS ZNOJMO, akciová společnost Družstevní 3 CZ 669 02 Znojmo Equipment: Face gearboxes Type/ Modification:MTC,
CUT CAM TOOL CHANGERS CUT31 - CUT41 - CUT51
CAM S 31-41 - 51 Smooth quiet motion Complete mechanical synchronization of cycle Both vertical and horizontal axis mounting position Positive control of acceleration and speed during full cycle Long life
Features. Suitable for use in SIL 2 applications. Available in LP low power version with less than 1.65 A current consumption. General application
The ICON 2000 v4 series are electronically-configurable quarter and multi-turn actuators with advanced operation, control, setting and maintenance characteristics Features General application The ICON
USO E MANUTENZIONE USE AND MAINTENANCE EMPLOI ET ENTRETIEN GEBRAUCH UND WARTUNG USO Y MANTENIMIENTO I GB F D E G25. roteritalia
I GB F D E USO E MANUTENZIONE USE AND MAINTENANCE EMPLOI ET ENTRETIEN GEBRAUCH UND WARTUNG USO Y MANTENIMIENTO G25 roteritalia INDEX Technical data... page 2 Machine identification... page 2 Guarantee...
Admiss. counterpressure. Admiss. pressure at pump inlet 115 S
Multi-layer pumps Flow capacity 55 l/h... 100 l/h 410.-...ML in survey Multi-layer technology High dosing accuracy Safe to run dry High quality materials Leakage-free Low maintenance User-friendly Integrable
HSERIES. Helical geared motors
HSERIES Helical geared motors Design features Motovario products are supplied with the following surface treatment features: Die-cast aluminium alloy cases for gears Die-cast materials undergo the following
VR Version. VSX (Atex) Version
FT- RTS-XXX-00 ELECTRIC ACTUATOR ER, VR, VRX, VS, VSX VERSION VT, VTX - STANDARD, FAILSAFE OR WITH POSITIONER ER Verion VR Version VRX (Atex) Version VS Version VSX (Atex) Version VT Version MAIN FEATURES
VALVES WITH SA ELECTRIC ACTUATOR
505-507 VALVES WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 505+SA and 507+SA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
Planning Section. Environmental conditions. Different power supply. Industrial solutions
Planning Section 86 89 Environmental conditions Different power supply 90 Industrial solutions 91 Power calculation and selection of the Motorized Pulley for package transportation 93 Oil types and contents
VALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
Certified Quality System UNI EN ISO 9001 : 2008 SERVICE MANUAL PGRF series Release A10/14
312 Certified Quality System UNI EN ISO 9001 : 2008 www.comerindustries.com SERVICE MANUAL PGRF series Release A10/14 INDEX GENERAL INFORMATION... 3 GEARBOX UNIT IDENTIFICATION... 3 RISKS AND PRECAUTIONS...
Power consumption Wire/transformer sizing. Motor. Spring return. Motor. Spring return. EMC Low voltage directive
Technical data sheet NFU Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations Torque: 10Nm Nominal voltage: AC 4... 40V DC 4...15V
TIP-200S-20 & TIP-200S-Ex-d-20 Power unit with electrohydraulic-acting spring-return rotary actuator (Normal & Explosion Proof Type)
TIP-200S-20 & TIP-200S-Ex-d-20 Power unit with electrohydraulic-acting spring-return rotary actuator (Normal & Explosion Proof Type) Introduction Electrohydraulic-acting Spring-return rotary actuator 90
Centrifugal medium-pressure fans fitted with multi-blade
CMP/ATEX CMP/ATEX impeller Centrifugal medium-pressure fans fitted with multi-blade with ATEX certification Centrifugal single-inlet, medium-pressure fans with casing and sheet steel impeller to work in
KAVITSU Excellence in Gear Technology. The compact And Efficient
KAVITSU Excellence in Gear Technology The compact And Efficient OUR RANGE OF PRODUCT PLANETARY SPEED REDUCER TORQUE :- 0 Nm TO 50 00 000 Nm :- : TO 00000 : POWER :- 0.8 KW TO 000 KW MOUNTING :- FOOT, FLANGE,
XMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
5 Gear units, types of installation, lubricant quantities. 5.1 Standard fitting positions/ types of installation for Bauer geared motors
26 5 Gear units, types of installation, lubricant quantities 5.1 Standard fitting positions/ types of installation for Bauer geared motors 5 27 28 5.2 Position of the terminal box and the cable entry points
Section 3.1. Machine Maintenance - Machine Maintenance Information. Important Preventive Maintenance Information: Maintenance Charts & Diagrams:
Section 3.1 Machine Maintenance - Maintenance Charts & Diagrams: Special Component Break-In Chart... 3.1.2 Preventive Maintenance Schedule Chart... 3.1.2 Lubrication Points Diagram... 3.1.3 Lubricant &
ALUMINIUM AND STAINLESS STEEL ENCLOSURES - EJB... SERIES
Ex d IIB+H 2 ALUMINIUM AND STAINLESS STEEL ENCLOSURES - EJB... SERIES ALUMINIUM ENCLOSURES STAINLESS STEEL ENCLOSURES EJB... series enclosures offer Ex d IIB +H 2 mode of protection. These enclosures are
Pro M i n e nt Sigma/ 2 Diaphragm Meter i ng Pu mps
2.8 Diaphragm Metering Pumps 2. 1.1 Pro M i n e nt Sigma/ 2 Diaphragm Meter i ng Pu mps Sigma/ 2 Diaphragm Metering Pumps The Sigma/2 motor diaphragm metering pumps are produced with a high-strength inner
Linear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1
> For use in Zones 1, 2, 21, 22 and safe area > 2-lamp version: 18 W 36 W > Housing made of sheet steel or stainless steel SS304 / > Quick fasteners www.stahl.de 15709E00 The light fittings of Series ECOLUX
motor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised experts
Explosion and flame-proof cast iron electric motors
Explosion and flame-proof cast iron electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 160 3 phases Voltage 230/400 V 50Hz Voltage 265/460V 60Hz Types of mounting
Admiss. counterpressure. stroke
R409. R409. in survey Safe if run dry Low weight Leakage free Low maintenance Easy to use High dosing accuracy Integrable into automatic processes Manual stroke length Robust metallic stroke-mechanism
DDA AR-PVC/V/C with access.
GRUNDFOS DATA BOOKLET DDA 7.5-16 AR-PVC/V/C with access. Grundfos pump 97974077 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/ddafam/97974077/dda-7-5-16-with-access.html
motor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised experts
EX-D ENCLOSURES AND DISTRIBUTIONS
EX-D ENCLOSURES AND DISTRIBUTIONS Series GHG made of metal for gases of explosion group IIC To use MCBs, fuses, contactors etc. which give off arcs in potentially hazardous areas, they must be integrated
AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
Versions. f.s. Worm gear units CMRV CMRV-CMRV... PC-CMRV... CRV CRV-CMRV...
Worm Gear Units 313 Versions CMRV 025-150 The service factor (f.s.) depends on the operating conditions the reduction unit is subjected to. The parameters that need to be taken into consideration to select
Handbuch für installation, betrieb und wartung Planetengetriebe
Italy Headquarters Installation, use and maintenance manual Manuale Installazione Uso e Manutenzione Riduttori Epicicloidali Installation, Operation and Service Manual Handbuch für installation, betrieb
VALVE WITH SA ELECTRIC ACTUATOR
752-753 VALVE WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 752-753+SA ball valve is dedicated to the automatic opening/shut-off of pipes carrying unloaded industrial fluids with a 16 bar maximum pressure.
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
GRUNDFOS DATA BOOKLET. DMX and DMH. Dosing pumps
GRUNDOS DATA BOOKLET Dosing pumps Contents eatures and benefits DMX 3 DMH 4 Performance range DMX, 4 to 765 l/h 5 DMH, 2.2 to 115 l/h 5 Identification Type key 6 unctions Overview of functions 7 Capacity
motor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE www.fwtsystems.it motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised
GRUNDFOS DATA BOOKLET. DMX and DMH. Dosing pumps
GRUNDOS DATA BOOKLET Dosing pumps Contents eatures and benefits DMX 3 DMH 4 Performance range DMX, 4 to 765 l/h 5 DMH, 2.2 to 115 l/h 5 Identification Type key 6 unctions Overview of functions 7 Capacity
SM-1000 SERIES ROTARY ACTUATORS
SM-1000 SERIES ROTARY ACTUATORS GENERAL DESCRIPTION The SM-1000 Series are multi-turn, rotary actuators, designed to meet the exacting requirements for closed-loop modulating positioning control. Designed
MS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
COMBUSTION AND ENERGY
CATALOGUE 2015 COMBUSTION AND ENERGY COMBUSTION AND ENERGY SRL VIA PER DOLZAGO, 21-23848 OGGIONO (LC) - ITALY - PH. +39 0 341.260926 - FAX +39 0 341.577747 INTERNATIONAL STANDARDS The ATEX directive consists
SP3A-15NE 1.1kW 3x V 50Hz
GRUNDFOS DATA BOOKLET SP3A-15NE 1.1kW 3x380-415V 50Hz Grundfos pump 10221915 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/spne03/10221915/sp-3a-15ne.html
Compact Sheet-Steel Light Fittings Series 6114/1
> As 1- or 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in positive
Apparatus which gives off arcs or sparks can be integrated in distributions at low cost using flameproof enclosures. Built-in electrical components
E X - D D I S T R I B U T I O N S with metal EJ enclosures for gases in explosion group IIB Apparatus which gives off arcs or sparks can be integrated in distributions at low cost using flameproof enclosures.
High Torque Geared Motors GB
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
PKX MA/A. Characteristics
PKX MA/A The PKX is a PTFE diaphragm type Solenoid Metering Pump that distinguishes itself for its simplicity of use. It has proven reliability and quality and due to it compact design and versatility
JVR CONTENTS. Page Introduction 2 Models and dimensions 3 Technical data. Selection tables 4 Technical data. Selection charts 5 Product codes 6
1 CONTENTS Page Introduction 2 Models and dimensions 3 Technical data. Selection tables 4 Technical data. Selection charts 5 Product codes 6 2 VAV regulator, model Description The variable air volume regulators
Circulation pumps BFP-ATEX-T3/T4
Circulation pumps BFP-ATEX-T3/T F ATEX - range of use: to zone 1 and zone 1 T3 to zone 1 and zone 1 T Low noise emission High vol. efficiency Optimum suction Gerotor principle Resistant to contamination
GRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
Sensor boxes SRBE Key features and product range overview
Sensor boxes SRBE Sensor boxes SRBE Key features and product range overview Function Sensor boxes SRBE are used for electrical feedback and control of the position of process valves actuated using pneumatic
Catalogue geared motors. Edition 01/
Catalogue geared motors Edition 0/0 Page Gearboxes and Lubrication Standard fitting - BG and BF - BK and BS Position of the terminal box and the cabel entry - BG and BF - BK and BS Radial and axial forces
Technical Datasheet. Differential Pressure Gauge Diaphragm DG Range. Performance characteristics. Product applications. How can we help you?
Technical Datasheet Differential Pressure Gauge Diaphragm DG Range Nominal Diameter options of 100mm & 150mm. Degree of Protection IP55/IP65. Stainless steel enclosure as standard. Blowout Protection.
DPT 200. Differential Pressure Transmitter for Process Industry with HART -Communication. accuracy according to IEC 60770: 0.
Differential Pressure Transmitter for Process Industry with HART Communication accuracy according to IEC 60770: 0.075 % FSO Differential pressure from mbar up to 0 bar Static pressure max. Output signal
Load disconnect switch Series 8146/5-V11
www.stahl.de Load disconnect switch > Motor switching capacity AC-3 and AC-23 acc. to DIN VDE 0660 part 107 IEC/EN 60947-3 > Isolating characteristics acc. to IEC/EN 60947-3 > Positive opening operation
Tekna. Solenoid driven dosing pumps. Your Choice, Our Commitment
Tekna Solenoid driven dosing pumps Your Choice, Our Commitment 02 Solutions for Water & Industry Five times the Flexibility A single outer casing contains 5 different models with flow rates ranging from
ELADOS EMP-KKS Diaphragm Piston Pump Type
Diaphragm Piston Pump Type 00002 00014 Metering with smallest possible rate capability High reproducibility High metering accuracy even with degassing products Self-priming and self-venting with smallest
XS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR. Model/Ref:
736-746XS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR Model/Ref: 272500023000 www.lauridsenindustri.com CHARACTERISTICS The 736XS (steel) and 746XS (stainless steel) + SA05 2-way ball valves are dedicated
5 TANK ¾ VALVE AND 6 TANK 1 VALVE HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS
HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS Standard ColourRHEADER TANK SOLUTIONS DESCRIPTION The patented Mecair Full Immersion System consists of a round header tank with fully integrated diaphragm
10 Load and Motor Switchgear
0 Load and Motor Switchgear Motor Protection ircuitbreakers For use in Zone and Zone Zone and Zone For protection of Ex e and Ex d motors Protects cables and plant equipment Adjustable thermal overcurrent
XS VALVES WITH SA ELECTRIC ACTUATOR. Model/Ref:
780-781XS VALVES WITH SA ELECTRIC ACTUATOR Model/Ref: 275400023010 www.lauridsenindustri.com CHARACTERISTICS The 780XS+SA L-port and 781 XS+SA T-port stainless steel 3-way ball valves are dedicated to
F01 Electric Actuators
Light weight, compact, intelligent electric quarter turn actuator with torques ranging from 150 to 600 Nm and speeds from 5 to 60 seconds FEATURES Constant torque controlled in both directions Cut metal
Euro-HYGIA. Euro-HYGIA s. Construction. Technical data. Applications. Materials. Sanitary pumps 50 Hz. Euro-HYGIA I and II. Food and beverage industry
Euro-HYGIA Euro-HYGIA s Construction Euro-HYGIA pumps are single-stage, end-suction centrifugal pumps designed to meet the hygienic requirements of sterile process technology. The pumps are CIP and SIP
XCKJ390559H29EX limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx
Characteristics limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx Main Range of product OsiSense ATEX D Series name Standard format Product or component type Limit switch Device short name XCKJ
ProMinent Pro M inent Sigma/ 3 Diaphragm Meter ing Pu mps. Diaphragm Rupture Warning System
Revised: 1st January 2016 2.13 2. 1. 1 Pro M inent Sigma/ 3 Diaphragm Meter ing Pu mps Sigma/ 3 The Sigma/1 motor diaphragm metering pumps are produced with a high-strength inner housing for parts subject
SP9-11 Rp2 4"1X /50 2.2kW
GRUNDFOS DATA BOOKLET SP9-11 Rp2 4"1X22-23/5 2.2kW Grundfos pump 9869924 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/spfam/9869924/sp-9-11.html
ExBin-P Pressure switches 5 Pa Pa
ExBin-P Pressure switches 5 Pa... 5.000 Pa Electrical, explosion-proof binary pressure / differential pressure switches 5 Pa...100 Pa with adjustable switch activation delay 24 VAC/DC supply voltage, potential
Floodlight LED Series 6525
www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of single-coated stainless
Floodlight Series 6121
www.stahl.de Floodlight > For use in gas group IIC (-20 C... +C) gas group IIB + H 2 (-C... +C) > Material Enclosure in seawater resistant cast aluminium Mounting components in stainless steel > Lamp options
ANKERSMID Temperature controller ATC 510/520/525 for wall-mounting. Application
2-3.1 ATC 510/520/525 for wall-mounting Application The ATC 510/5205/525 is a modern microprocessor-based (PID) control device featuring easy handling and a digital display. The clear design of the operator
Material: Weight: Shaft Loads: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
2/2-way Compact Solenoid Valve, G 1/4 - G 1/2
2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 Stainless steel body Type 6027 Compact can be combined with Direct-acting, normally closed Brass and stainless steel body Electrical connection cable plug
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
200 SERIES THREADED VALVES PENTAIR CLEAN AIR SYSTEMS
THREADED VALVES PENTAIR CLEAN AIR SYSTEMS Lock nut DESCRIPTION The is a range of diaphragm valves suitable for dust collector applications, in particular for reverse pulse-jet filter cleaning of filter
Motorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated