Power consumption Wire/transformer sizing. Motor. Spring return. Motor. Spring return. EMC Low voltage directive
|
|
- Edith Hall
- 6 years ago
- Views:
Transcription
1 Technical data sheet NFU Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations Torque: 10Nm Nominal voltage: AC V DC V Control: Open/Close Technical data Electrical data Functional data Nominal voltage AC V, 50/60 Hz, DC V Nominal voltage range AC V / DC V Power consumption Wire/transformer sizing running holding AC 4V AC 10V AC 40V Connection Cable 1m, x 0.75mm Torque Min. nominal voltage Min. 10Nm Direction of rotation Selectable by mounting L/R By manual override key Angle of rotation Max. 95, limited on both sides by means of adjustable, mechanical end stops Running time Sound power level Position indication Max. 75s (0...10Nm) Max C / max. 30 C Max. 50dB(A) Max. 6dB(A) Mechanical Working conditions Protection class II Totally insulated Degree of protection IP54 EMC Low voltage directive CE according to 004/108/EC CE according to 006/95/EC Control pollution degree 3 Rated Impulse Voltage 4kv Type 1.AA Ambient temperature range C Non-operating temperature C Ambient humidity range 95% RH, non-condensing Maintenance Maintenance-free Dimensions / Weight Dimensions See «Dimensions» on page Weight Approx. 000g Safety notes! The Damper Actuator is not allowed to be used outside the specified field of application especially not in aircraft or any other form of air transport. Caution: Power supply voltage! Assembly must be carried out by trained personnel. Any legal regulations or regulations issued by authorities must be observed during assembly. The device may only be opened at the manufacturer s site. It does not contain any parts that can be replaced or repaired by the user. The cable must not be removed from the device. When calculating the required torque, the specifications supplied by the damper manufacturers (cross section, design, installation site), and the air flow conditions must be observed. The device contains electrical and electronic components and is not allowed to be disposed of as household waste. All locally valid regulations and requirements must be observed. 1
2 -FRONT NFU Product features Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating. Manual operation is possible with the manual override key Adjustable angle of rotation High functional reliability Adjustable angle of rotation with mechanical end stops. The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached. Electrical installation Wiring diagrams Note Caution: Power supply voltage!! Other actuators can be connected in parallel. Please note the performance data. N L 1 M Dimensions [mm] Dimensional drawings Standard : ¾ - clamp (with insert) Optional 1: 1 -clamp (without insert) Optional : ½ -clamp (optional via configuration)
3 Technical data sheet NFU-S Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations Torque: 10Nm Nominal voltage: AC V DC V x SPDT auxiliary switches build-in Control: Open/Close Technical data Electrical data Functional data Nominal voltage Nominal voltage range Power consumption Auxiliary switch Connection Torque Direction of rotation AC V, 50/60Hz, DC V AC V / DC V running holding AC 4V AC 10V AC 40V x SPDT, 1mA... 3(0.5) A, AC 50V one fixed at 10%, one adjustable 10%...90% By manual override key Angle of rotation Max. 95, limited on both sides by means of adjustable, mechanical end stops Running time Max. 75s (0...10Nm) Max C / max. 30 C Sound power level Auxiliary switches Cable 1m, x 0.75mm Cable 1m, 6 x 0.75mm Min. nominal voltage Min. 10Nm Selectable by mounting L/R Max. 50dB(A) Max. 6dB(A) Position indication Mechanical Safety Protection class II Totally insulated Degree of protection IP54 EMC Low voltage directive Control Pollution Degree CE according to 004/108/EC CE according to 006/95/EC 3 Rated Impulse Voltage Supply: 4kV Switch:.5kV Type 1.AA.B Ambient temperature range C Non-operating temperature C Ambient humidity range 95%RH, non-condensing Maintenance Maintenance-free Dimensions / Weight Dimensions See «Dimensions» on page Weight Approx. 000g Safety notes! The Damper Actuator is not allowed to be used outside the specified field of application, especially not in aircraft or any other form of air transport. Caution: Power supply voltage! Assembly must be carried out by trained personnel. Any legal regulations or regulations issued by authorities must be observed during assembly. The device may only be opened at the manufacturer s site. It does not contain any parts that can be replaced or repaired by the user. The cable must not be removed from the device. When calculating the required torque, the specifications supplied by the damper manufacturers (cross section, design, installation site), and the air flow conditions must be observed. The device contains electrical and electronic components and is not allowed to be disposed of as household waste. All locally valid regulations and requirements must be observed. 1
4 -FRONT NFU-S Product features Simple direct mounting Signalling Adjustable angle of rotation High functional reliability Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating. Manual operation is possible with the manual override key. Two microswitches with fixed settings are installed in the actuator for indicating the damper end positions. The position of the damper blade can be read off on a mechanical position indicator. Adjustable angle of rotation with mechanical end stops. The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached. Electrical installation Wiring diagrams Note Caution: Power supply voltage!! Other actuators can be connected in parallel. Please note the performance data. N L 1 S1 S S3 S4 S5 S6 M 10% 10%... 90% adjustable Dimensions [mm] Standard : ¾ - clamp (with insert) Dimensional drawings Option 1: 1 -clamp (without insert) Option : ½ -clamp (optional via configuration)
5 Technical data sheet NFU4-SR Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations Torque: 10Nm Nominal voltage: AC/DC 4V Control: Modulating DC (0)...10V Position feedback: DC...10V Technical data Electrical data Nominal voltage AC 4V, 50/60 Hz, DC 4V Nominal voltage range AC V / DC V Power consumption Wire/transformer sizing running /.5W holding AC 4V Connection Cable 1m, 4 x 0.75mm Functional data Torque Min. nominal voltage Min. 10Nm Control signal DC (0)...10V, typical input impedance 100k Position feedback DC...10V, max. 1mA Position accuracy ±5% Direction of rotation R eversible with switch or Selectable by mounting L/R Direction of rotation at Y = 0 At switch position 0 resp. 1 By manual override key Angle of rotation Max. 95, limited on both sides by means of adjustable, mechanical end stops Running time 150s (0...10Nm) Max C / -30 C Sound power level Max. 150s running time Max. 6dB(A) Position indication Mechanical Safety Protection class III Safety extra-low voltage Degree of protection IP54 EMC Control pollution degree CE according to 004/108/EC 3 Rated impulse Voltage 800V Type 1.AA Ambient temperature range C Non-operating temperature C Ambient humidity range Maintenance 95% R.H., non-condensing Maintenance-free Dimensions / Weight Weight Dimensions Approx. 000g See «Dimensions» on page Safety notes! The Damper Actuator is not allowed to be used outside the specified field of applica tion, especially in aircraft or any other form of air transport. Assembly must be carried out by trained personnel. Any legal regulations or regulations issued by authorities must be observed during assembly. The device may only be opened at the manufacturer s site. It does not contain any parts that can be replaced or repaired by the user. The cable must not be removed from the device. When calculating the required torque, the specifications supplied by the damper manufacturers (cross section, design, installation site), and the air flow conditions must be observed. The device contains electrical and electronic components and is not allowed to be disposed of as household waste. All locally valid regulations and requirements must be observed. 1
6 -FRONT NFU4-SR Product features Simple direct mounting The actuator is controlled by means of a standard control signal DC (0)...10V. It opens to the position dictated by this signal. The measuring voltage U allows the damper position ( %) to be electrically indicated and serves as a follow-up control signal for other actuators. Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating. Manual operation is possible with manual override key Adjustable angle of rotation High functional reliability Adjustable angle of rotation with mechanical end stops. The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached. Electrical installation Wiring diagrams Notes Connection via safety isolating transformer.! Other actuators can be connected in parallel. Please note the performance data. T ~ + AC 4V DC 4V Y U DC (0) 10V DC 10V Dimensions [mm] Standard : ¾ - clamp (with insert) Dimensional drawings Option 1: 1 -clamp (without insert) Option : ½ -clamp (optional via configuration)
Power consumption In operation At rest For wire sizing. Functional data Torque Motor Spring return. Rated impulse voltage Control pollution degree 3
SRFA Rotary actuator with emergency function for ball valves Torque 20Nm Nominal voltage AC 24...240V / DC 24...125V Control: Open/Close SRFA: Deenergised NC Technical data Electrical data Nominal voltage
More informationTechnical data. Safety notes. Power consumption In operation At rest For wire sizing. 1.5 nominal torque 0.2 W 4 VA Auxiliary switch
echnical data sheet Damper actuator NM4A-S-P Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air control dampers up
More informationTechnical data. Safety notes. Power consumption In operation At rest For wire sizing. 1 nominal torque 0.2 W 2 VA Auxiliary switch
echnical data sheet Damper actuator LM4A-S-P Damper actuator for operating air control dampers in ventilation and air-conditioning systems for building services installations For air control dampers up
More informationTechnical data. Safety notes
echnical data sheet SM4A-S-P Damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 4 m orque Nm Nominal
More informationPower consumption In operation At rest For wire sizing
echnical data sheet actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx. 2 m 2 orque 10 m ominal voltage AC/DC
More informationPower consumption In operation At rest For wire sizing. Connection Motor. Auxiliary switch
echnical data sheet actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx 4 m 2 orque 20 m ominal voltage AC/DC
More informationPower consumption In operation At rest For wire sizing
echnical data sheet FA actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx. 2 m 2 orque 10 m ominal voltage
More informationElectrical data Nominal voltage AC/DC 24V Nominal voltage frequency 50/60Hz
GR24A-5 / -7 GR24A-5 Rotary actuator for rotary valves GR24A-7 Rotary actuator for rotary valves Nominal torque 40Nm Nominal voltage AC/DC 24V Control Open-close echnical data Electrical data Nominal voltage
More informationTechnical data. Safety notes
echnical data sheet SMA-S-P Damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 4 m orque m ominal voltage
More informationPower consumption In operation At rest For wire sizing. Cable 1 m, 2 x 0.75 mm 2 Cable 1 m, 6 x 0.75 mm 2 Functional data Torque Motor Spring return
echnical data sheet FA-S2 actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx. 2 m 2 orque 10 m ominal voltage
More informationPower consuption motor (motion) Power consuption standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control of spring return actuator Description Spring-return actuator for adjusting and regulating dampers and valves in air conditioning and ventilation. Torque
More informationElectrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
echnical data sheet SH24A-SR.. Modulating linear actuators for adjusting air dampers and slide valves in ventilation and air conditioning systems in buildings For air dampers up to approx. 3 m 2 Actuating
More informationPower consuption Motor (Motion) Power consuption Standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control of rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in ventilation and air conditioning
More informationPower consumption In operation At rest For wire sizing
echnical data sheet SF24G-S- Modulating spring return actuator with emergency function in the IP66 protective protecti e housing for adjusting air dampers in industrial plants and in technical building
More informationOverview of types. Technical data. Safety notes
echnical data sheet LH4A-S-P.. Linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air dampers up to approx.
More informationPower consumption In operation At rest For wire sizing. Connection Motor. Auxiliary switch
echnical data sheet SF24G-S-S2- Modulating spring return actuator with emergency function in the IP66 protective protecti e housing for adjusting air dampers in industrial plants and in technical building
More informationElectrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V. Power consumption In operation At rest For wire sizing
echnical data sheet LH4A.. Linear actuators for operating air control dampers and slide valves in ventilation and air-conditioning systems For air control dampers up to approx. m Actuating force 5 ominal
More informationPower consuption Motor (Motion) Power consuption Standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor
More informationElectrical data Nominal voltage AC 230 V Nominal voltage frequency
echnical data sheet NRA Rotary actuator for ball valves Nominal torque Nm Nominal voltage AC V Control Open-close, -point echnical data Electrical data Nominal voltage AC V Nominal voltage frequency 5/6
More informationPower consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
Technical data sheet GK24G- SuperCap rotary actuator with emergency setting function and extended functionalities in the IP66 protective housing for adjusting air dampers in ventilation and air-conditioning
More informationSee «Overview of types» 90 s / 60 mm 150 s / 100 mm Manual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool
echnical data sheet LHA-MF.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
More informationCurrent consumption Auxiliary switch. Angle of rotation 90 (internal electrical stops) Running time
Technical data sheet Rotary actuator SY-4--T Rotary actuators for butterfly valves Torque 50 Nm Nominal voltage AC 4 V Control: Open-close or -point Auxiliary switch Technical data Electrical data Nominal
More informationPower consuption motor (motion) Power consuption standby (end position) Position feedback Auxiliary switch Contact load Switching point
Actuators Technical data sheet Rotary drive Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor Nominal Voltage Control Damper size Damper
More informationPower consumption In operation At rest For wire sizing
echnical data sheet SFG- Spring return actuator with emergency function in the IP66 I protective protecti e housing for adjusting air dampers in industrial plants and in technical building installations
More informationMinimum 18 in-lb Torque
CM Series Direct Coupled Actuator Minimum 18 in-lb Torque For damper areas up to 6.8 sq-ft* Actuators in bold have BDCM CMB Series - At A Glance CMB24-3 (p. 311) CMB24-3-T (p. 311) CMB120-3 (p. 313) CMB24-SR-R
More informationTechnical data sheet. Technical data. Safety notes
echnical data sheet NM24P Robustline damper actuator for operating air dampers in industrial plants and in the technical building installations For air dampers up to approx..6 m 2 orque 8 Nm Nominal voltage
More informationElectrical data Nominal voltage AC V / DC V Nominal voltage frequency
Technical data sheet NFG-S2-L Spring-return actuator with emergency control function for adjusting dampers in technical building installations Air damper size up to approx. 2 m² Nominal torque 10 Nm Nominal
More informationPower consumption In operation At rest For wire sizing
echnical data sheet SHA.. inear actuators for adjusting air dampers and slide valves in ventilation and air conditioning systems in buildings For air dampers up to approx. m Actuating force 45 ominal voltage
More informationPower consumption Operation At rest Wire sizing. Auxiliary switch. EMC Low-voltage directive. Non-operating temperature range 40...
echnical data sheet SM24P-S Robustline damper actuator for operating air dampers in industrial plants and in the technical building installations For air dampers up to approx..2 m 2 orque 8 Nm Nominal
More informationPower consumption In operation At rest For wire sizing
echnical data sheet LHK24A-SZ Modulating SuperCap linear actuator with emergency setting function and extended functionalities for adjusting air dampers and sliders in ventilation and air-conditioning
More informationPower consumption In operation At rest For wire sizing. Actuating force Inhibiting force. Position accuracy ±5% Direction of stroke Motor
echnical data sheet SHK24A Linear actuator with capacitor technology for adjusting air dampers and sliders with emergency control function and extended functionalities in ventilation and air-conditioning
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
Technical data sheet DRK24A-5 SuperCap rotary actuator with emergeny control function and extended functionalities for butterfly valves Nominal torque 9 Nominal voltage AC/DC 24 V Control Open-close Design
More informationSee «Overview of types»
echnical data sheet SHA-.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air conditioning systems in buildings For air dampers up to approx. 3 m Actuating
More informationTechnical data. Safety notes
echnical data sheet MP-S Robustline damper actuator for operating air dampers in industrial plants and in the technical building installations For air dampers up to approx 6 m orque 8 m ominal voltage
More informationElectrical data Nominal voltage AC 24 V Nominal voltage frequency
Technical data sheet Globe valve actuator with emergency control function for 2-way and 3-way globe valves Actuating force N Nominal voltage AC 24 V Control 3-point Nominal stroke 2 mm Design life SuperCaps:
More informationPower consumption In operation At rest For wire sizing. Non-operating temperature
echnical data sheet DRC4G--7 Rotary actuator for butterfly valves for outdoor applications orque 90 Nm (not constant) Nominal voltage AC/DC 4 V Control: Open-close IP66 Optimum protection against moisture
More informationCurrent consumption Auxiliary switch. Angle of rotation 90 (internal electrical stops) Running time
Technical data sheet Rotary actuator SY-4--T Rotary actuators for butterfly valves Torque 5 Nm Nominal voltage C 4 V Control: Open-close or -point uxiliary switch Technical data Electrical data Nominal
More informationFire and Smoke Damper Actuator product overview
Fire and Smoke Damper Actuator product overview Fire and Smoke protection Spring-Return Actuator BLF.. BF.. BFG.. FSLF..US FSNF..US FSAF..US Agency listing CE certification UL555 and UL555S Torque - Motor
More informationElectrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V. Power consumption In operation At rest For wire sizing. Non-operating temperature
echnical data sheet SR24P-R Robustline rotary actuator for butterfly valves and rotary valves in Retrofit applications orque 18 Nm Nominal voltage AC/DC 24 V Control: Open-close or 3-point Optimum protection
More informationNon-Spring Return SMU... series
Non-Spring Return SMU... series Product overview New Generation Non-spring return actuator Open/Close, 3-point AC 24 V 5/6 Hz, DC 24 V Auxiliary switch build-in SPD AC..24 V 5/6 Hz AC 23 V 5 Hz (Open/Close)
More informationButterfly Valves. Technical Databook Version 7.2. Belimo Asia Pacific
Butterfly Valves Technical Databook Version 7.2 Belimo Asia Pacific BFV and Actuators Product Range Overview and Applications BU6..Series Motorised Butterfly Valves page 4 BU6..Series Butterfly Valves
More informationSpring-Return Damper Actuator NF24(-S)
Spring-eturn Damper Actuator NF24(-S) For operation of air control dampers that perform safety function Torque: 7Nm Nominal voltage: AC/ Control: Open/Close Integrated auxiliary switch NF24-S Technical
More informationPower consuption Motor (Motion) Power consuption Standby (end position) 0(2)...10 VDC / Ri > 50 kω 0(4)...20 ma / Rext.= 500 Ω
Actuators Technical data sheet Rotary actuator for control of volumetric flow without spring return Description Actuator for Volumetric flow and pressure control. Torque Motor Nominal Voltage Control Pressure
More information2. A E LM Form-fit versions Linear adapter ZH-LM
Actuators for heating, ventilation, air-conditioning 2. A1-90122 - E LM Form-fit versions Linear adapter ZH-LM OEM at001707 at00205 Linear adapter ZH-LM: For LM2... damper actuators with universal spindle
More informationIn operation At rest For wire sizing
NMQ24A Damper actuator for adjusting air control dampers in ventilation and air-conditioning systems for building services installations orque 8Nm Nominal voltage AC/DC 24V Control: Open-close (not made
More informationSM24A. Technical data. Dimensions [mm]
SM24A Damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services orque 2Nm Nominal voltage AC/DC 24V Electrical data Nominal voltage AC 24V, 5/6Hz / DC
More informationGMX On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 100 to 240 VAC
On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 00 to 40 VAC Torque min. 60 in-lb for control of damper surfaces up to 90 sq ft. Application For on/off and floating point control of dampers
More informationMinimum 27 in-lb torque
LU Series Actuator Minimum 27 in-lb torque For damper areas up to 6.8 sq-ft* All Actuators have BDCM LU Series - At A Glance LUB(X)24-3 (p. 258) LUB(X)24-SR (p. 260) LUX24-MFT (p. 262) Basic Product Flexible
More informationDamper Actuators Non-Spring Return
50 Non-Spring Return MD5A, MD10A, MD20A, MD40A The MD.A series are 2-10V modulating damper actuators designed for operating air control dampers in ventilation and air conditioning systems for building
More informationOverview of types. Technical data
Technical data sheet 6..S+NVFT24-MFT-E Globe valves, 2-way, with flange PN 16, actuator with emergency control function for closed hot water systems up to 150 C in district heating applications approved
More informationVersatile and Powerful
AM Series Direct Coupled Actuator Versatile and Powerful Minimum 180 in-lb torque in a compact package. For damper areas up to 45 sq-ft* All Actuators have BDCM AM Series - At A Glance AMB(X)24-3 (p. 148)
More informationNFB24, NFB24-S, NFX24, NFX24-S On/Off, Spring Return, 24 V
NFB4, NFB4-S, NFX4, NFX4-S On/Off, Spring Return, 4 V Torque min. 90 in-lb, for control of air dampers Technical Data Power supply Power consumption Transformer sizing Electrical connection NFB4... NFX4...
More informationMinimum 27 in-lb Torque
LU Series Actuator Minimum 27 in-lb Torque For damper areas up to 6.8 sq-ft* Actuators in bold have BDCM LU Series - At A Glance LUB(X)24-3 (p. 351) LUX120-3 (p. 353) LUB(X)24-SR (p. 355) LUX120-SR (p.
More informationGlobe Valves. Technical Databook Version 1.2. Belimo Asia Pacific
Globe Valves Technical Databook Version 1.2 Belimo Asia Pacific Contents Globe Valves Product Overview Max. Close-off Pressure - Globe Valve Series Globe Valve Actuators Product Overview 4 5 General Information
More informationActuators for heating, ventilation, air-conditioning 2. LM-4 -CD. Product Information Damper actuators. i
Actuators for heating, ventilation, air-conditioning. LM-4 -CD Product Information Damper actuators LM i689 he complete range of damper actuators for general use in HVAC systems ype LM NM SM AM GM LF AF
More informationMount directly to 1.05 jackshafts. (new ZG-120 bracket shown) EFB24-S N4, EFX24-S N4(H) EFB24-S, EFX24-S (p. 21)
EFB and EFX Series Spring Return Direct Coupled Actuator Minimum 70 in-lb Torque For damper areas up to 66 sq-ft* (For lower torque, see AFB, AF, NFB, LF, or TF series) Applications New standard clamp
More informationAMB24-3(-S) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 24 V
AMB4-3(-S) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 4 V Torque min. 80 in-lb for control of damper surfaces up to 45 sq ft. Application For on/off and floating point control of
More informationVersatile and Powerful
LM Series Direct Coupled Actuator Versatile and Powerful Minimum 45 in-lb torque in a compact package. For damper areas up to 11 sq-ft* Actuators in bold have BDCM LM Series - At A Glance LMB(X)24-3(-S)(-T)
More informationCharacterised Control Valves with Actuators
Characterised Control Valves with Actuators Technical Databook Version 8.6 Belimo Asia Pacific Contents Control Valves and Actuators Product Overview 4 Characterised Control Valve 6 Sizing of Ball Valves
More informationVAV - A (High-speed variable volume flow ) Controls For Laboratories and Industrial Applications
VAV - A (High-speed variable volume flow ) Controls For Laboratories and Industrial Applications 1 2 3 4 5 6 7 8 Technical data sheet 227CS-024-08-V Actuator without spring return for flow- or pressure
More informationLMB24-3 (-S)(-T) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 24 V
LMB- (-S)(-T) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, V Torque min. 5 in-lb for control of damper surfaces up to sq ft. Technical Data LMB- on/off-floating Power Supply VAC ±
More informationAMB24-3(-S) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, 24 V
AMB-(-S) On/Off-Floating Point Control, Non-Spring Return, Direct Coupled, V Torque min. 80 in-lb for control of damper surfaces up to 5 sq ft. Application For on/off and floating point control of dampers
More informationCharacterised Control Valves with Actuators
Characterised Control Valves with Actuators echnical Databook Version 6.2 Belimo Asia Pacific Product Overview and able of Contents able of Contents 2 Control Valves and Actuators Product Overview 3 Characterised
More informationNominal voltage Nominal voltage range Power consumption Wire / tranformer sizing. Connection: Motor LMU24(-S/-F) Cable 1m, 3x0.
LMU24(S/F/) For operation of air control dampers in HVAC system orque: 5Nm Nominal voltage: AC/DC 24V Control: Open/Close or 3point echnical data Electrical data Functional data Working conditions Nominal
More informationProduct Cross Reference
AF120 US, AF120-S US AF230 US, AF230-S US AFBUP, AFBUP-S, AFXUP, AFXUP-S Torque 133 in-lb [15 Nm] minimum 180 in-lb. [20 Nm] minimum OPERATION Running Time Noise Level < 75 seconds
More informationLMX120-SR. Proportional Control, Non-Spring Return, Direct Coupled,100 to 240 VAC, for 2 to 10 VDC and 4 to 20 ma
LMX0-SR Proportional Control, Non-Spring Return, Direct Coupled,00 to 0 VAC, for to 0 VDC and to 0 ma Torque min. 5 in-lb for control of damper surfaces up to sq ft. Application For proportional modulation
More informationActuators for heating, ventilation, air conditioning 2. LF-2 -CD. Product Information Damper actuators with spring return.
Actuators for heating, ventilation, air conditioning 2. F-2 -CD Product Information Damper actuators with spring return F i6772 Contents Selection table orque 4 Nm F24 F24-S F23 F23-S F24-3 F24-S Nominal
More informationZG-JSL, ZG-JSLA Jackshaft Retrofit Linkage For AF, NF, LF, NMX and AMX Series Actuators
ZG-JSL, ZG-JSLA Jackshaft Retrofit Linkage For AF, NF, LF, NMX and AMX Series Actuators The ZG-JSL jackshaft linkage is designed to easily attach to any part of a jackshaft and allow easy installation
More informationMinimum 18 in-lb Torque. Applications. TF Series At A Glance. TF Series Spring Return Direct Coupled Actuator. For damper areas up to 4.
TF Series Spring Return Direct Coupled Actuator Minimum 18 in-lb Torque For damper areas up to 4.5 sq-ft* Applications Cost effective quality and performance for a range of applications including: Classroom
More informationMinimum 90 in-lb Torque. Applications. NFB, NFX Series At A Glance. NFB and NFX Series Spring Return Direct Coupled Actuator
NFB and NFX Series Spring Return Direct Coupled Actuator Minimum 90 in-lb Torque For damper areas up to sq-ft* Applications 1 3/4 1/ New standard clamp fits standard 1/ shafts to 1.05 jackshafts. Mount
More informationButterfly Valves. Technical Databook. Belimo Asia Pacific
Butterfly Valves Technical Databook Version 6 Belimo Asia Pacific Index BFV and Actuators Product Range Overview and Applications BU6..Series Motorised Butterfly Valves BU6..Series Butterfly Valves General
More informationTRF.. series spring return rotary actuators for CCV
TF.. series spring return rotary actuators for CCV Spring return rotary actuators: For ball valves DN 5.. Torque: 2 Nm Modulating control TF24-S (C/DC 24 V) Floating (3-point) control TF24-2 (C/DC 24 V)
More informationGMX24-SR. Proportional Control, Non-Spring Return, Direct Coupled, 24V, for 2 to 10 VDC and 4 to 20 ma
Proportional Control, Non-Spring Return, Direct Coupled, 4V, for to 0 VDC and 4 to 0 ma Torque min. 360 in-lb for control of damper surfaces up to 90 sq ft. Application For proportional modulation of dampers
More informationP2050S-030, 1/2, Electronic Pressure Independent Valve Stainless Steel Ball and Stem, Female NPT Ends
P2050S-030, 1/2, Electronic Pressure Independent Valve Stainless Steel Ball and Stem, Female NPT Ends Application Water-side control of heating and cooling systems for AHUs and water coils. Equal Percentage/
More informationDirect Coupled Damper Actuator Model MY6050A1001
Specifications/Instructions Direct Coupled Damper Actuator General direct coupled damper actuator is a motorized actuator to open/close a damper. Model MY6050A00 provides -position or floating control
More informationActuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
More informationNMQB24-MFT, NMQX24-MFT Quick Proportional Control, Non-Spring Return, Direct Coupled, 24V, Multi-Function Technology
NMQB-MFT, NMQX-MFT Quick Proportional Control, Non-Spring Return, Direct Coupled, V, Multi-Function Technology Application For proportional modulation of dampers in HVAC systems. Actuator sizing should
More informationDirect Coupled Damper Actuator Model MY9050A1001
AB-4 Specifications/Instructions Direct Coupled Damper Actuator Model MY9050A00 General Model MY9050A00 direct coupled damper actuator is a motorized actuator to open/close a damper. Model MY9050A00 contains
More informationActuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
More informationLMCB24-SR LMCB24-SR-T. applications. Dimensions (All numbers in brackets are in millimeters.) 1/4 to 3/4 [6 to 20] 5/16 to 3/4 [8 to 26] 1.
LMCB4-SR (-T) Proportional Control, Non-Spring Return, Direct Coupled, 4V, for to 0 VDC and 4 to 0 ma Torque min. 45 in-lb for control of damper surfaces up to sq ft. LMCB4-SR LMCB4-SR-T HALOMO Brushless
More informationNon-Spring Return EconoDrive Floating Actuator
MF4D-0x Series Non-Spring Return EconoDrive Actuator EconoDrive overshaft actuators are designed to provide an economical and reliable solution for many overshaft damper and ball valve requirements. All
More informationNVCB 9000 series Ball Valves with Characterised Disc 2-way Flanged DN 100/DN 125/DN 150
NVCB 9000 series Ball Valves with Characterised Disc 2-way Flanged DN 100/DN 125/DN 150 NVCB 9000 series NENUTEC ball valves with characterised discs are especially designed and produced for applications
More informationNMB (X) 24-MFT. Proportional Control, Non-Spring Return, Direct Coupled, 24V, Multi-Function Technology
NMB (X) -MFT Proportional Control, Non-Spring Return, Direct Coupled, V, Multi-Function Technology Torque min. 90 in-lb for control of damper surfaces up to sq ft. Technical Data NMB(X)-MFT Power Supply
More informationM9208-xxx-x Series Electric Spring Return Actuators
Code No. LIT-1900562 Issued March 10, 2009 M9208-GGx-x, M9208-AGx-x, M9208-Bxx-3 M9208-xxx-x Series Electric Actuators Description The M9208-xxx-x Series Electric Spring Return Actuators provide control
More informationMF /MS Series
MF41-6153/MS41-6153 Series 24 Vac, Three-position/Modulating Non-spring Return Rotary Electronic Damper SmartX Actuators General Instructions Description The direct-coupled, 24 Vac, non-spring return electronic
More informationDuraDrive MF /MS Series Non-spring Return Rotary Electronic Damper Actuators 24 Vac Three-position/Modulating
General Instructions DuraDrive MF4-653/MS4-653 Series Non-spring Return Rotary Electronic Damper Actuators 4 Vac Three-position/Modulating Description The DuraDrive direct-coupled, 4 Vac, non-spring return
More informationCharacterized Control Valves Actuators. Technical Databook Ver. 2
Characterized Control Valves Actuators Technical Databook Ver. 2 Product overview and table of contents Table of contents 2 Control valves and actuators Product overview The Trane Ball valves The Trane
More informationM9220-xxx-3 Electric Spring Return Actuators
Code No. LIT-1900358 Issued November 19, 2012 M9220-xxx-3 Electric Spring Return Actuators Description The M9220-xxx-3 Actuators are direct-mount, spring-return electric actuators that operate with these
More informationActuators for air dampers and control valves of oil burners
7 812 ISO 9001 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Run times: - SQM1...
More informationElectromotoric Actuators
4 506 SQL33 Electromotoric Actuators for valves with 90 angle of rotation SQL33 operating voltage AC 230 V SQL33 operating voltage AC 230 V operating voltage AC 24 V 3-position control signal Nominal angle
More informationM9208-xxx-x Series Electric Spring Return Actuators
Code No. LIT-1900562 Issued February 1, 2013 M9208-GGx-x, M9208-AGx-x, M9208-Bxx-3 M9208-xxx-x Series Electric Spring Return Actuators Description The M9208-xxx-x Series Electric Spring Return Actuators
More informationLF Series Spring Return Direct Coupled Actuator
LF Series Spring Return Direct Coupled Actuator Minimum in-lb torque LF actuator For damper areas up to 8 sq-ft* Applications Cost effective quality and performance for a range of applications including:
More informationElectromotoric actuators
s 4 520 ACVATIX TM Electromotoric actuators SQL321B.. SQL361B.. For VKF42.. butterfly valves SQL321B.. Operating voltage AC 220 V, 2-position (SPDT) control signal SQL361B.. Operating voltage AC 220 V,
More informationM9220 Series Electric Spring-Return Actuators
M9220 Series Electric Spring-Return Actuators Code No. LIT-1900358 Issued January 2, 2014 Description The M9220-xxx-3 actuators are direct-mount, spring-return electric actuators that operate with these
More informationM9203-xxx-2(Z) Series Electric Spring Return Actuators
M9203-AGx-2(Z), M9203-GGx-2(Z), M9203-Bxx-2(Z) M9203-xxx-2(Z) Series Electric Spring Return Actuators Code No. LIT-1900682 Issued February 16, 2011 Description The M9203-xxx-2(Z) Series Electric Spring
More informationDA-053 Series. Overview. Applications. Features & Benefits. Datasheet. 53lb-in (6 Nm), Non-Spring Return Damper Actuators
Datasheet 53lb-in (6 Nm), Non-Spring Return Damper Actuators Overview The direct-coupled fail-safe/failin-place electronic actuators are designed for modulating, two position, and floating control of laboratory
More informationElectrical Actuators
OEM Electrical Actuators SSY319 for valves VXG48, VXB489R, VXI48 VVP459, VXP459, VMP459, VVG549 AC 230 V operating voltage, 3-position control signal Positioning force 300 N Manual override with indication
More informationM9203-xxx-2(Z) Series Electric Spring-Return Actuators
Code No. LIT-1900682 Issued January 2, 2014 M9203-xxx-2(Z) Series Electric Spring-Return Actuators Description The M9203-xxx-2(Z) Series Electric Spring-Return Actuators provide control of dampers in HVAC
More informationActuators for small valves
Actuators for small valves with 5.5 mm nominal stroke 4 891 SSB31... SSB81... 80130 80117 SSB... without auxiliary switch SSB...1 with auxiliary switch Electro-mechanical actuators for valve types VMP45...,
More informationSAX Electronic Valve Actuator
SAX Electronic Valve Actuator Non-spring Return, 24 Vac, Proportional Control Technical Instructions Document No. 155-506 Description The SAX Non-spring Return (NSR), Electronic Valve Actuator requires
More information