TEST REPORT Reference No. : TRHZ _R1 Date : Nov. 27, 2012 Page No.: 1 of 5

Transcription

1 Reference. : TRHZ0630_R Date : v. 27, 202 Page.: of pplicant : ddress : HINING LOFTY XUN BNNER TEXTILE CO., LTD. NO.70-,LONGXING ROD, HICHNG STREET, HINING CITY, ZHEJING, CHIN. The following merchandise was (were) submitted and identified by the client as: Name Of Product : SILK SHINING FBRIC Test Model : LXDP-07 Model May Cover : Main material : 00% Polyester Color : White End Use : Banner show Sample Received : v. 3, 202 Test Period : v.3, 202 v. 20, 202 Test Request : s the Client required, to do the flammability requirements of the sample according to DIN 02 B(998) Test Method : DIN 02- (May 998) Fire behavior of building materials and elements Part : Classification of building materials, Requirements and testing Test Results : Please refer to next page(s). Conclusion : The tested sample meets the low flammability requirements of class B of building materials under DIN 02- (May 998). THIS REPORT IS TO SUPERSEDE TEST REPORT TRHZ0630. Issued by: TÜV NORD GPSC Manager

2 Reference. : TRHZ0630_R Date : v. 27, 202 Page.: 2 of TEST RESULTS: I. Test conducted This test was conducted as per DIN 02-:990, DIN 02-6:998 and DIN 02-:998 Clause 6.2. Classification in according to DIN 02- (May 998) Clause 6.-Class B materials II. Sample details General description Color Density Size of sample Polyester,27GSM White 2.6m*.7m Conditioning Prior to testing, the sample was conditioned at least days to constant mass at a temperature of 23 ± 2 C, and a relative humidity of 0 ± 6 %. III. Test results ) Brandschacht Test according to DIN 02- &6 Orientation: Product direction, Exposed surface: Face of the sample Results of Brandschacht Test (part ) Specimen fixings according to DIN 02 part, table Max. flame height above lower sample edge**; Time ) Meltingburning through 0 2: Time ) 0: Flamingglowing, Time ) Discolouring, Time ) Burning droplets Begin ) mount Specimen material falling off in separate droplets Specimen material falling off continuously 0:06 Test assemblies.

3 Reference. : TRHZ0630_R Date : v. 27, 202 Page.: 3 of Results of Brandschacht Test (part 2) Burning parts Begin ) Parts of sample falling off separately Parts of sample falling off continuously Duration of continued combustion on mesh base (max.) Burner material Time ) flame Premature ending of test End of burning at specimen impairment by drippingfalling 6 Time when test terminated (if applicable) Burning after end of test Duration Number of specimens Front of specimen Height of flame Glowing after end of test Duration Number of specimens Front of specimen Top half of specimen Bottom half of specimen ) ) :3 2: Test assemblies. ******** To be continued ********

4 Reference. : TRHZ0630_R Date : v. 27, 202 Page.: of Results of Brandschacht Test (part 3). Test assemblies. Residual length 28 Single results verage of the single results 0 Smoke temperature 30 Max. of average 0 3 Time ) 3.28 te: ) time from start of testing 2) rmal Flammability Test according to DIN 02- Clause 6.2 Flame application: bottom edge ignition Specimen. 2 3 Reaching the measuring mark within 20 seconds Self extinguishing of the flame (s) 6 6 Max. flame height () End of afterflaming (s) 6 End of afterglowing (s) Molten dripping Smoke developments (visual impression) Slight ll timings are from start of testing ******** To be continued ********

5 TEST REPORT Reference. : TRHZ0630_R Date : Jun. 2, 20 Page.: of Comments: DIN 02-B2 Criteria for classification for Class B (DIN 02- Clause 6..2) ll materials, except flooring, may be classed as B materials if they met, a) Pass DIN 02-6 brandschacht test if ) The mean value for the residual length of each specimen is at least, and no individual values are lower than 0 ; 2) The mean effluent temperature does not exceed 200 in any test; 3) The requirement for the residual length of each specimen is met even where there is afterflame, afterglow, or smouldering. b) Pass DIN 02- Clause Ignitability Test if, For each specimen, flaming doesn t reach the gage mark within 20s after flame application. STTEMENTS: This test report does not replace any mandatory certification of the product that may be required. The test results relate to the behaviour of the test specimens of a product under the particular conditions of the test; they are not intended to be the sole criterion for assessing the potential fire and smoke hazard of the product in use. SMPLE PHOTO TÜV NORD TRHZ0630_R ******** END OF REPORT *********