Germany B1 Fire Rating. kraft paper products. molo design, ltd Venables Street Vancouver, B.C. Canada V5L 2G7

Transcription

1 Germany B1 Fire Rating kraft paper products molo design, ltd 1470 Venables Street Vancouver, B.C. Canada V5L 2G7 t f info@molodesign.com

2 molo kraft paper products B1 fire rating Germany molo kraft paper products have achieved a German B1 fire rating and have have passed the North American standard NFPA 701 and French M1 rating. B1 (Brandschacht) is the main test method in Germany which measures reaction to fire and is considered the highest flammability standard in the country. molo kraft paper products are completely fire retardant and are difficult to ignite / self-extinguishing. This rating is consistent with use in all types of occupancies. All products should always be kept away from any open flame or heat source to avoid possible damage.

3 Exova Warringtonfire, Frankfurt Industriepark Höchst, C369 Frankfurt am Main D Germany T : +49 (0) F : +49 (0) E : EBH@exova.com W: Test report No for applying of a required Verwendbarkeitsnachweis issued Applicant: molo design ltd Venables St. Vancouver, BC V5L 2G7 Date of order: Date of sampling: no official sampling of the specimen by a representative of Exova Warringtonfire, Frankfurt Date of arrival: Date of test: und Order Testing of the flammability (building class B1) according to DIN (May 1998) Description / designation of the test object Sample material designated as: Kraft paper for soft collection Description of the relevant test procedure DIN 4102 part 1 (Mai 1998) This test report does replace the required Verwendbarkeitsnachweis. It is only used for issuing the Verwendbarkeitsnachweis.

4 Test report No issued page 2 of 8 1. Description of the test material 1.1 Details of the customer: Sample material designated as: Kraft paper for soft collection 1. layer of the kraft paper used to contruct our honeycomb in softwall + softblock + softseating + benchwall + cantilever table brown Kraft weight: 120 g/m² (paper; 105 g/m² + FR; 15 g/m²) 104cm roll width thickness 180 µ (+/-50µ) 20% recycled content FR applied by paper manufacturer AF-100 treated Intended end use of product: Interior wall partitions and seating softwall + softblock + softseating + benchwall + cantilever table 1.2 By Exova Warringtonfire, Frankfurt determined values: Paper Colour: Thickness: Square weight: brown 0,18 mm 121 g/m² Testing after storing 14- days under climatic conditions (23 C / 50 % rel. humidity).

5 Test report No issued page 3 of 8 2. Test results Brandschachtprüfung according to DIN Sample A: Sample B: Sample C: Material tested in production direction Material tested in production direction Material tested in production direction cm Test results of the Brandschacht tests part 1 line Measurements test sample no. A B C D 1 no. test arrangement according to DIN 4102 part 15, table flame height max. over lower sample edge time 1) 0:10 0:08 0:08 3 ascertainments on the front side Flaming/glowing time 1) 0:05 0:04 0:04 4 melting / burning through time 1) 0:13 0:13 0:09 5 ascertainments on the back side Flaming/glowing time 1) 6 discolouring time 1) no no no burning droplets begin 1) extent occasional dropping of material constant dropping of material separating from burning sample parts begin 1) occasional separating parts constant separating parts 13 duration of burning on the sieve tray (max.) influence on the burner flame by dropping of / separating material 14 time 1) earlier end of test 15 end of the fire scenario on the sample 1) 16 time of a possible resulted test stop 1) no no no no no no no no no 1) time from start of test

6 Test report No issued page 4 of 8 Test results of the Brandschacht tests part 2 line no flaming after end of test duration number of sample front side of sample backside of sample flame length glowing after end of test duration number of sample place of occurrence lower sample part upper sample part front side of sample backside of sample cm min. s Measurements test sample A B C smoke density < 400 % x min > 440 % x min diagram in annex no residual length single results average of the single results photo of the sample on page smoke temperature max. of the average results time 1) diagram in annex no. cm cm C 32 / / / / / / :07 9:28 8: ) time from start of test Remarks:

7 Test report No issued page 5 of Appearance of the specimen after the test: Sample A Sample B Probe C

8 Test report No issued page 6 of Normal flammability test according to DIN Test with edge ignition without deposit Flame application on: lower sample edge Edge ignition Sample-no. Time from start of test Ignition point [s] Reaching the measuring mark within 20 seconds no no no no no Self-extinguishing of the flame [s] Max. flame height [mm] Time [s] End of afterflaming [s] End of afterglowing [s] Flames extinguished after [s] Smoke development (visual impression)low / moderate / strong Low smoke development Separating from burning material no no no no no Time [s] Remarks: none

9 Test report No issued page 7 of Appearance of the sample after the small burner test:

10 Test report No issued page 8 of 8 Assessment The material described in chapter one fulfils the requirements of the building class B2 according to DIN (Mai 1998). The determined test results show that the material also fulfils the requirements according to DIN (Mai 1998). of the building class B1 Special e The fire test result is only valid for the material described in chapter one in the tested colour and square weight. The test was carried out in free hanging configuration. The distance to other plane material must be more or equal then 40 mm. The material wasn't tested after an outside storage. In combination with other materials (for example coatings, deposits) the burning behaviour could be influenced unfavourable so that the classification above is valid any longer. According to DIN the burning behaviour in combination with other materials has to be tested separately. This test report does replace the required Verwendbarkeitsnachweis. It is only used for issuing the Verwendbarkeitsnachweis. Frankfurt, the H. Anders P. Scheinkönig Tester in Charge Deputy head of the business This Test report is valid until The results of the tests relate only to the behaviour of the test specimen which is designated on the top. Test reports are only allowed to be published or reproduced, changed in form and tenor without permission of the Exova Warringtonfire, Frankfurt. The abridged account of a test report is only allowed with the agreement of the Exova Warringtonfire, Frankfurt. This test report is a translation of the German version (issued ). In case of doubt only the German version is valid This test report contains 8 pages and 3 annexes..

11 Annex 1 to the Test report No issued Sample A:

12 Annex 2 to the Test report No issued Sample B:

13 Annex 3 to the Test report No issued Sample C: