Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Institute for International Product Safety GmbH Hein-Moeller-Straße 7-11, Bonn Tests in the fields: Industrial low-voltage, Assemblies,, Electromagnetic compatibility (EMC) and Flexible scope of accreditation Category I (Page 2-3) Within the given testing field marked with *), the testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, the free choice of standard or equivalent testing methods. The listed testing methods are exemplary. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. Flexible scope of accreditation Category III (Page 4-44) Within the scope of accreditation marked with **), the testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standard testing methods listed here with different issue dates. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/44

2 * Flexible scope of accreditation Category I Climatic Tests Kind of Test Test parameter Range Representative test method Temperature Temperature C EN EN Climate Temperature C EN Relative humidity % r.h. EN EN EN Thermal shock (Air/Air) Temperature C EN Na Corrosive Tests Kind of Test Test parameter Range Representative test method Salt mist Concentration of solution Temperature of test 5 % NaCl RT 50 C EN ISO 9227 EN chamber Relative humidity of test chamber % r.h. ASTM B UL 50 E Condensation water atmosphere Sulfur dioxide Temperature of test chamber Relative humidity of test chamber Temperature of test chamber Relative humidity of test chamber Corrosive gas RT 50 C ISO % r.h C EN ISO % r.h. 25 ppm SO2 Resistance to abrasion Pressing force N EN Number of actuation 10¹ 10⁷ Period of validity: to Translation - 2/44

3 Mechanical dynamic Tests Kind of Test Test parameter Range Representative test method Impact Test Impact energy 0,14 50 J EN Ehb, Ehc EN 50102, IEC Free fall Drop and topple Fall height mm EN Test surface Wood, concrete, steel Vibration, sinusoidal Frequency 5 Hz 3000 Hz EN Acceleration sinusoidal up to 91 g EN Vibration Frequency 5 Hz 3000 Hz EN broad-band random Acceleration (RMS) up to 60 g EN Shock, bump Duration up to 21 ms EN Acceleration shock up to 180 g Pulse shape Half-sine 1 no Test "Free fall repeated Procedure 2" Period of validity: to Translation - 3/44

4 ** Flexible scope of accreditation Category III Industrial low-voltage IEC ( ) EN ( ) DIN EN VDE ( ) Measuring relays and protection - Part 1: Common requirements IEC ( ) EN ( ) DIN EN VDE ( ) Electrical relays Part 3: Single input energizing quantity measuring relays with dependent or independent time IEC (1988) EN ( ) DIN EN VDE ( ) Electrical relays Part 6: Measuring relays and protection Equipment IEC ( ) EN ( ) DIN EN VDE ( ) Measuring relays and protection Part 151: Functional requirements for over/under current protection Period of validity: to Translation - 4/44

5 IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) IEC ( ) HD ( ) DIN VDE VDE ( ) Low-voltage fuses Part 1: General requirements Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (Fuses mainly for industrial application) Examples of standardized systems of fuses A to J IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN VDE VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (Fuses mainly for household and similar applications) Examples of standardized systems of fuses A to F Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices DIN EN VDE ( ) Period of validity: to Translation - 5/44

6 IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage fuses Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) Low-voltage assemblies Part 1: Type-tested and partially typetested assemblies DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) Low-voltage assemblies Part 2: Particular requirements for busbar trunking systems (busways) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) EN /A2 ( ) DIN EN VDE ( ) Low-voltage assemblies Part 3: Particular requirements for low-voltage assemblies intended to be installed in places where unskilled persons have access for their use Distribution boards Period of validity: to Translation - 6/44

7 IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage assemblies Part 4: particular requirements for Assemblies for construction sites (ACS) IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage assemblies Part 5: Particular requirements for assemblies intended to be installed Outdoors in public places Cable distribution cabinets (CDCs) for Power distribution networks IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN 60529/A1 ( ) EN 60529/A2 ( ) DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Degrees of protection provided by enclosures (IP code) Insulation coordination for within low-voltage systems Part 1: Principles, requirements and Period of validity: to Translation - 7/44

8 IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage Part 1: General rules Low-voltage Part 2: Circuit-breakers Low-voltage Part 3: Switches, disconnectors, switch-disconnectors and fusecombination units Low-voltage Part 4-1: Contactors and motorstarters Electromechanical contactors and motor-starters : Up to 100 MHz amplifier power suitable for test level 3 (10V). : Up to 100 MHz amplifier power suitable for test level 3 (10V). Period of validity: to Translation - 8/44

9 IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) EN /A2 ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) EN /A2 ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /AC ( ) EN /A1 ( ) DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage Part 4-2: Contactors and motorstarters AC semiconductor motor controllers and starters Low-voltage Part 4-3: Contactors and motorstarters AC semiconductor controllers and contactors for non-motor loads Low-voltage Part 5-1: Control circuit devices and switching elements Electromechanical control circuit devices Low-voltage Part 5-2: Control circuit devices and switching elements Proximity switches : Up to 100 MHz amplifier power suitable for test level 3 (10V). : Up to 100 MHz amplifier power suitable for test level 3 (10V). Period of validity: to Translation - 9/44

10 IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage Part 5-3: Control circuit devices and switching elements Requirements for proximity devices with defined behaviour under fault conditions (PDF) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A2 ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) Low-voltage Part 5-4: Control circuit devices and switching elements Methods of assessing the performance of low-energy contacts Special Low-voltage Part 5-5: Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function Low-voltage Part 6-2: Multiple function Transfer switching element DIN EN VDE ( ) Period of validity: to Translation - 10/44

11 IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage Part 6-2: Multiple functions Control and protective switching devices (or ) (CPS) IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage Part 7-1: Ancillary Terminal blocks for copper conductors IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A2 ( ) Low-voltage Part 7-2: Ancillary Protective conductor terminal blocks for copper conductors DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage Part 8: Control units for built-in thermal protection (PTC) for rotating machines Period of validity: to Translation - 11/44

12 IEC ( ) EN ( ) DIN EN VDE ( ) Programmable controllers Part 1: General information IEC 17D/416/CDV ( ) FprEN ( ) DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Programmable controllers Part 2: Equipment requirements and Tests Low-voltage assemblies Part 1: General rules : Up to 100 MHz amplifier power suitable for test level 3 (10V). No test with damped oscillation. No measurement of disturbance field strength. IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage assemblies Part 2: Power assemblies Period of validity: to Translation - 12/44

13 IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) IEC ( ) EN ( ) DIN EN VDE ( ) Low-voltage assemblies - Part 5: Assemblies for power distribution in public networks IEC 17D/416/CDV ( ) FprEN ( ) DIN EN VDE ( ) Low-voltage assemblies - Part 6: Busbar trunking systems (busways) IEC/TS ( ) DIN IEC/TS VDE V ( ) Low-voltage assemblies - Part 7: Assemblies for specific installations at public sites such as marinas, camping sites, market squares and similar applications and for charging stations for Vehicles Period of validity: to Translation - 13/44

14 IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Adjustable speed power drive systems Part 3: EMC requirements and specific test methods Adjustable speed power drive systems Part 5-1: Safety requirements Electrical, thermal and energy : Only for with rated voltage up to 400 V and rated current up to 16 A. No measurement of disturbance field strength. IEC ( ) EN ( ) DIN EN VDE ( ) Electromechanical elementary relays Part 1: General and safety requirements IEC ( ) EN ( ) DIN EN VDE ( ) Time relays for industrial and residential use Part 1: Requirements and Period of validity: to Translation - 14/44

15 IEC ( ) EN ( ) DIN EN VDE ( ) Power capacitors - Low-voltage power factor correction banks IEC ( ) EN ( ) DIN EN VDE ( ) Empty enclosures for low-voltage assemblies General requirements EN ( ) DIN EN DIN EN VDE ( ) Degrees of protection provided by enclosures for against external mechanical impacts (IK code) DIN VDE VDE ( ) Electronic for use in power installations : No measurement of disturbance field strength. Period of validity: to Translation - 15/44

16 DIN VDE VDE ( ) Specifications for single- and multiple cable clamps with insulating parts in power cable installations up to 1000 V DIN VDE VDE ( ) Consumer units and meter panels AC 400 V Consumer units and meter panels DIN VDE VDE ( ) Customer distribution boards and meter panels AC 400 V Main line branch terminals DIN VDE VDE ( ) Terminal blocks for connecting copper conductors Distribution terminal blocks up to 6 mm2 Period of validity: to Translation - 16/44

17 DIN VDE VDE ( ) Low-voltage assemblies Part 505: Specification for house connection boxes and fuseboxes Period of validity: to Translation - 17/44

18 IEC ( ) IEC AMD 1 ( ) EN ( ) EN 60112/A1 ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) DIN EN /A1 VDE /A1 ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Method for the determination of the proof and the comparative tracking indices of solid insulating materials machinery Electrical of machines Part 1: General requirements Fire hazard testing Part 2-10: Glowing/hot-wire based test methods Glow-wire apparatus and common test procedure IEC ( ) EN ( ) DIN EN VDE ( ) Fire hazard testing Part 2-11: Glowing/hot-wire based test methods Glow-wire flammability test method for end-products Period of validity: to Translation - 18/44

19 IEC ( ) EN ( ) DIN EN VDE ( ) Fire hazard testing Part 2-12: Glowing/hot-wire based test methods Glow-wire flammability index (GWFI) test method for materials IEC ( ) EN ( ) DIN EN VDE ( ) Fire hazard testing Part 2-13: Glowing/hot-wire based test methods Glow-wire ignitability îndex (GWIT) test method for materials IEC ( ) EN ( ) DIN EN VDE ( ) Fire hazard testing Part 10-2: Abnormal heat Ball pressure test IEC ( ) EN ( ) DIN EN VDE ( ) Fire hazard testing Part 11-5: Test Flames - Neddle-flame test method Apparatus, confirmatory test arrangement and guidance Period of validity: to Translation - 19/44

20 IEC ( ) EN ( ) DIN EN VDE ( ) Fire hazard testing Part 11-10: Test flames - 50 W horizontal and vertical flame test methods IEC ( ) IEC AMD 1 ( ) EN ( ), IDT, EN /A1 ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) EN /A11 ( ) EN /A12 ( ) EN /A13 ( ) DIN EN VDE ( ) DIN EN /A12 VDE /A12 ( ) DIN EN /A13 VDE /A13 ( ) IEC ( ) IEC AMD 1 ( ) EN ( ) DIN EN VDE ( ) Fire hazard testing Part 11-20: Test flames W flame test methods Electrical accessories Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation Circuit-breakers for overcurrent protection for household and similar installations Part 2: Circuit-breakers for a.c. and d.c.operation Period of validity: to Translation - 20/44

21 IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN 60934/A1 ( ) EN 60934/A2 ( ) DIN EN VDE 0642 ( ) IEC ( ) EN ( ) DIN EN VDE ( ) IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A2 ( ) DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Circuit-breakers for (CBE) Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units Part 1:General requirements and particular requirements for clamping units for conductors 0,2 mm2 up to 35 mm2 (included) Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) Residual current operated circuitbreakers without integral overcurrent protection for household and similar uses (RCCB s) Part 1: General rules Period of validity: to Translation - 21/44

22 IEC ( ) EN ( ) DIN EN VDE ( ) Residual current operated circuitbreakers without integral overcurrent protection for household and similar uses (RCCB s) Part 2-1: Applicability of the general rules to RCCB s functionally independent of line voltage IEC ( ) EN ( ) DIN EN VDE ( ) Residual current operated circuitbreakers with integral overcurrent protection for household and similar uses (RCBO s) Part 1: General rules IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A2 ( ) DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Safety requirements for for measurement, control and laboratory use - Part 1: General requirements Safety requirements for for measurement, control, and laboratory use - Part 2-201: Particular requirements for industrialprocess measurement, control and automation, specifically control (excluding functional safety) Period of validity: to Translation - 22/44

23 IEC ( ) EN ( ) DIN EN VDE ( ) Switches for appliances Part 1: General requirements IEC ( ) EN ( ) DIN EN VDE ( ) Switches for appliances Part 2-1: Particular requirements for cord switches IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A2 ( ) DIN EN VDE ( ) IEC ( ) EN ( ) DIN EN VDE ( ) Electromechanical contactors for household and similar purposes Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements Period of validity: to Translation - 23/44

24 IEC ( ) EN ( ) DIN EN VDE ( ) Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) IEC ( ) IEC AMD 1 ( ) EN ( ) EN 62019/A1 ( ) EN 62019/A11 ( ) DIN EN VDE 0640 ( ) EN ( ) EN 62262/A1 ( ) DIN EN DIN EN VDE ( ) DIN EN 50102/A1 DIN EN 62262/A1 VDE /A1 ( ) DIN VDE VDE ( ) Electrical accessories Circuit-breakers and similar for household use Auxiliary contact units Degrees of protection provided by enclosures for against external mechanical impacts (IK code) Residual current operated circuitbreakers without integral overcurrent protection for household and similar uses (RCCBs) Part 101: Applicability of the general rules to RCCBs for rated voltage exceeding 440 V AC or rated current exceeding 125 A Period of validity: to Translation - 24/44

25 BGI 526 ZH 1/44 ( ) Evaluation of the accessibility of components Period of validity: to Translation - 25/44

26 EMC - Electromagnetic compatibility EMC IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) EN /A2 ( ) Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions ( input current < 16 A per phase) : No restrictions DIN EN VDE ( ) EMC IEC ( ) EN ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in public lowvoltage supply systems, for with rated current < 16 A per phase and not subject to conditional connection : No restrictions EMC IEC ( ) EN ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 4-2: Testing and measuring techniques Electrostatic discharge immunity test : No restrictions Period of validity: to Translation - 26/44

27 EMC IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) EN /A2 ( ) DIN EN VDE ( ) EMC IEC ( ) IEC Corr 1 ( ) IEC Corr 2 ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) EMC IEC ( ) EN ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 4-3: Testing and measuring techniques Radiated, radio-frequency electromagnetic field immunity test Electromagnetic compatibility (EMC) Part 4-4: Testing and measuring techniques Electrical fast transient/burst immunity test Electromagnetic compatibility (EMC) Part 4-5: Testing and measuring techniques Surge immunity test : Up to 1 GHz amplifier power suitable for test level 3 (10 V/m) at 2 m distance at maximum. Size of homogeneous field 0.5 m x 0.5 m at f = MHz. Size of homogeneous field 1 m x 1 m at f = MHz. : No restrictions : No restrictions Period of validity: to Translation - 27/44

28 EMC IEC ( ) EN ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 4-6: Testing and measuring techniques Immunity to conducted disturbances, induced by radio-frequency fields : Up to 100 MHz amplifier power suitable for test level 3 (10V). EMC IEC ( ) EN ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 4-11: Testing and measuring techniques Voltage dips, short interruptions and voltage variations immunity : No restrictions EMC IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) EMC IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) EN /A2 ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques Voltage fluctuation immunity test for with input current not exceeding 16 A per phase : No restrictions : No restrictions Period of validity: to Translation - 28/44

29 EMC IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) EN /A2 ( ) DIN EN VDE ( ) DIN EN /A2 VDE /A2 ( ) EMC IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) EMC IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A1 ( ) EN /A2 ( ) DIN EN VDE ( ) EMC IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity test Electromagnetic compatibility (EMC) Part 4-27: Testing and measurement techniques Unbalance, immunity test for with input current not exceeding 16 A per phase Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques Variation of power frequency, immunity test for with input current not exceeding 16 A per phase Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c. input power port immunity : No restrictions : No restrictions : No restrictions : No restrictions Period of validity: to Translation - 29/44

30 EMC IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 6-1: Generic standards Immunity for residential, commercial and light-industrial environments : Up to 1 GHz amplifier power suitable for test level 3 (10 V/m) at 2 m distance at maximum. Size of homogeneous field 0.5 m x 0.5 m at f = MHz. Size of homogeneous field 1 m x 1 m at f = MHz. Test according to EN will be subcontracted. Period of validity: to Translation - 30/44

31 EMC CISPR 11 ( ) CISPR 11 AMD 1 ( ) EN ( ) EN 55011/A1 ( ) DIN EN VDE ( ) EMC CISPR 22 ( ) EN ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments : Up to 1 GHz amplifier power suitable for test level 3 (10 V/m) at 2 m distance at maximum. Size of homogeneous field 0.5 m x 0.5 m at f = MHz. Size of homogeneous field 1 m x 1 m at f = MHz. EMC : Only conducted emission can be performed in accordance with the standard. EMC IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments EMC : Only conducted emission can be performed in accordance with the standard. Period of validity: to Translation - 31/44

32 EMC IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN VDE ( ) EMC CISPR 11 ( ) CISPR 11 AMD 1 ( ) EN ( ) EN 55011/A1 ( ) DIN EN VDE ( ) Industrial, scientific and medical Radio disturbance characteristics Limits and methods of measurement Information technology Radio disturbance characteristics Limits and methods of measurement EMC : Only conducted emission can be performed in accordance with the standard. EMC : Only conducted emission can be performed in accordance with the standard. Period of validity: to Translation - 32/44

33 IEC ( ) EN ( ) DIN EN ( ) testing Part 1: General and guidance IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 2-1: Tests Tests A: Cold IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 2-2: Tests Tests B: Dry heat IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) Period of validity: to Translation - 33/44

34 IEC (1981) EN ( ) DIN EN ( ) testing Part 2-11: Tests Test Ka: Salt mist IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 2-24: Tests Test N: Change of temperature IEC ( ) EN ( ) DIN EN ( testing Part 2-18: Tests Test R and guidance: Water IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 2-27: Tests Test Ea and guidance: Shock Period of validity: to Translation - 34/44

35 IEC (1987) EN ( ) DIN EN ( ) testing Part 2-29: Tests Test Eb and guidance: Bump IEC ( ) EN ( ) DIN EN ( ) testing Part 2-30: Tests Test Db and guidance: Damp heat, cyclic ( hour cycle) IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 2-31: Tests Test Ec: Rough handling shocks, primarily for -type specimens IEC (1975) IEC AMD 1 (1982) IEC AMD 2 ( ) EN ( ) testing Part 2-32: Tests Test Ed: Free fall DIN EN ( ) Period of validity: to Translation - 35/44

36 IEC (1971) IEC AMD 1 (1978) EN ( ) DIN EN ( ) testing Part 2-33: Guidance on change of temperature IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 2-38: Tests Test Z/AD: Composite temperature/humidity cyclic test IEC (1980) IEC AMD 1 ( ) EN ( ) DIN EN ( testing Part 2-45: Tests Test XA and guidance: Immersion in cleaning solvents IEC ( ) EN ( ) DIN EN ( ) testing Part 2-47: Tests Mounting of components, and other articles for vibration, impact and similar dynamic Period of validity: to Translation - 36/44

37 IEC (1982) EN ( ) DIN EN ( ) testing Part 2-48: Tests Guidance on the application of the of IEC to simulate the effects of storage IEC ( ) EN ( ) DIN EN ( ) testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) IEC ( ) EN ( ) DIN EN ( ) testing Part 2-61: Tests Test Z/ABDM: Climatic sequence IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 2-64: Tests Test Fh: Vibration, broad-band random (digital control) and guidance Period of validity: to Translation - 37/44

38 IEC ( ) EN ( ) DIN EN ( ) testing Part 2-67: Tests Test Cy: Damp heat, steady state, accelerated test primarily intended for components IEC ( ) EN ( ) DIN EN ( ) testing Part 2-70: Tests Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands IEC ( ) EN ( ) DIN EN ( ) testing Part 2-75: Tests Test Eh: Hammer IEC ( ) EN ( ) DIN EN ( ) testing Part 2-78: Tests Test Cab: Damp heat, steady state Period of validity: to Translation - 38/44

39 IEC ( ) EN ( ) DIN EN VDE ( ) testing Part 3-1: Background information Cold and dry heat IEC ( ) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A2 ( ) DIN EN ( ) IEC (1982) IEC AMD 1 (1987) DIN IEC ( ) Classification of environmental conditions Part 1: parameters and their severities Electrical engineering Classification of environmental conditions Part 2: conditions appearing in nature Temperature and humidity IEC ( ) EN ( ) DIN IEC ( ) Electrical engineering Classification of environmental conditions Part 2: conditions appearing in nature Precipitation and wind Period of validity: to Translation - 39/44

40 IEC (1984) IEC AMD 1 (1987) EN ( ) DIN EN ( ) Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Introduction IEC ( ) EN ( ) DIN EN ( ) Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 1: Storage IEC ( ) EN ( ) DIN EN ( ) Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 2: Transportation IEC ( ) EN ( ) DIN EN ( ) Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 3: Stationary use at weatherprotected locations Period of validity: to Translation - 40/44

41 IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN ( ) DIN EN /A1 ( IEC ( ) EN ( ) DIN EN ( ) Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 4: Stationary use at notweatherprotected locations Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 5: Ground vehicle installations IEC (1987) IEC AMD 1 ( ) IEC AMD 2 ( ) EN ( ) EN /A2 ( ) DIN EN ( ) DIN EN /A2 ( ) IEC ( ) EN ( ) DIN EN ( ) Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 6: Ship environment Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 7: Portable and nonstationary use Period of validity: to Translation - 41/44

42 IEC ( ) IEC AMD 1 ( ) EN ( ) EN /A1 ( ) DIN EN ( ) DIN EN /A1 ( ) ISO ( ) EN ISO ( ) DIN EN ISO ( ) Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 9: Microclimates inside products Paints and varnishes Determination of resistance to humidity Part 2: Procedure for exposing test specimens in condensationwater atmospheres ISO 6988 ( ) EN ISO 6988 ( ) DIN EN ISO 6988 ( ) Metallic and other non-organic coatings Sulfur dioxide test with general condensation of moisture ISO 9227 ( ) EN ISO 9227 ( ) DIN EN ISO 9227 ( ) Corrosion in artificial atmospheres Salt spray Period of validity: to Translation - 42/44

43 ISO ( ) EN ISO ( ) DIN EN ISO ( ) Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion ISO ( ) Road vehicles - Degrees of protection (IP-Code) - Protection of against foreign objects, water and access IEC ( ) DIN ( ) Road vehicles Degrees of protection (IP-code) Protection against foreign objects, water and contact Electrical DIN ( ) Testing in a saturated atmosphere in the presence of sulfur dioxide Period of validity: to Translation - 43/44

44 Technical responsibility for the test reports: Herr Ralf Hartkamp Herr Klaus Heidelberger Herr Toni Hoffmann Herr Heribert Schorn Period of validity: to Translation - 44/44