Issue Title Remarks. Instrument transformers See IEC 61869

Transcription

1 357 Appendix Norms and Standards As far as norms and standards are mentioned in this book, the respective citation of IEC or DIN EN is given. If IEC-standards or DIN EN-norms are not available, the European norms (EN ), VDE-norms or DIN-norms are given. A reference is given for some standards to corresponding ones; amendments and corrigenda are mentioned if available. Engineering works always requires the application of the latest editions of standards, norms, and technical recommendations, which can be obtained from the IEC secretariat or from the national standard organization. IEC Graphical symbols for use on equipment ANSI (IEEE C37.2) Electrical Power System Device Function Numbers, Acronyms, and Contact Designations See IEC IEC IEC standard voltages IEC Different issue dates Instrument See IEC IEC Insulation coordination Part 1: Definitions, principles, and rules VDE Continued Power System Engineering: Planning, Design and Operation of Power Systems and Equipment, Second Edition. Jürgen Schlabbach and Karl-Heinz Rofalski Wiley-VCH Verlag GmbH & Co. KGaA. Published 2014 by Wiley-VCH Verlag GmbH & Co. KGaA.

2 358 Appendix IEC Insulation coordination Part 2: Application guide VDE IEC/TR Insulation coordination Part 4: Computational guide to insulation coordination and modeling of electrical networks IEC Power Part 2: Temperature rise for liquid-immersed VDE IEC Power Part 7: Loading guide for oil-immersed power IEC Power Part 12: Loading guide for dry-type power IEC Electrical insulation Thermal evaluation and designation IEC Electric cables Calculation of the current rating Part 1-1: Current rating equations (100% load factor) and calculation of losses General IEC Loading guide for oil-immersed See IEC IEC Replaced by IEC IEC DB-12M Graphical symbols for diagrams 12-month subscription to online database comprising parts 2 to 13 of IEC DIN DIN EN 60617

3 Appendix 359 IEC Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36) kv IEC Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kv and emergency ratings for cables of all voltages IEC Calculation of the cyclic and emergency current rating of cables Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil IEC Short-circuit currents Calculation of effects Part 1: Definitions and calculation methods IEC/TR A method of temperaturerise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear IEC Short-circuit currents in three-phase a.c. systems Part 0: Calculation of currents VDE 0103 VDE 0660 VDE 0102 IEC Low-voltage switchgear and control gear IEC Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects Continued

4 360 Appendix IEC Short-circuit temperature limits of electric cables with rated voltages from 6 kv up to 30 kv IEC Electromagnetic 3-2: Limits Limits for harmonic current emissions (equipment input current 16 A per phase) IEC Electromagnetic 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 6 A per phase and not subject to conditional connection Corrigendum VDE VDE IEC/TS IEC/TS IEC/TR Electromagnetic 3-4: Limits Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A Electromagnetic 3-5: Limits Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A Electromagnetic 3-7: Limits Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems Corrigendum

5 Appendix 361 IEC Electromagnetic compatibility (EMC) Part 3-11: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems Equipment with rated current 75 A and subject to conditional IEC Electromagnetic compatibility (EMC) Part 3-12: Limits Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase IEC Preparation of documents used in electrotechnology Part 1: Rules VDE VDE VDE 0040 IEC Short-circuit currents in d.c. auxiliary installations in power plants and substations Part 1: Calculation of short-circuit currents IEC Short-circuit currents in d.c. auxiliary installations in power plants and substations Part 2: Calculation of effects Corrigendum VDE VDE IEC/TR Electric cables Calculations for current ratings Finite element method

6 362 Appendix DIN DIN EN DIN EN Water supply Requirements for systems and components outside buildings DIN Placing of service conduits in public areas; directives for planning DIN Excavations and trenches Slopes, planking, and strutting breadths of working spaces DIN EN Transformers; three-phase oil immersed type power with off-circuit tapchanger or with on-load tap-changer 2000 to kva for 50 Hz and U m up to 123 kv; characteristics In German Replaced by DIN DIN EN Transformers Oil-immersed power from 3150 kva up to kva and U m up to 123 kv DIN EN Cast aluminum alloy enclosures for gas-filled high-voltage switchgear and controlgear DIN EN Wrought aluminum and aluminum alloy enclosures for gas-filled high-voltage switchgear and control gear; In German See VDE In German VDE DIN EN Voltage characteristics in public distribution systems DIN EN Conductors for overhead lines. Round wire concentric lay stranded conductors

7 Appendix 363 DIN DIN EN DIN Common test methods for cables under fire conditions Tests on gases evolved during combustion of materials from cables DIN EN Overhead electrical lines exceeding AC 1 kv Part 1: General requirements Common specifications DIN EN Overhead electrical lines exceeding AC 1 kv up to and including AC 45 kv Part 1: General requirements Common specifications In German VDE VDE VDE DIN EN Different issue dates Instrument VDE 0414 See DIN EN DIN EN Power Part 2: Temperature rise for liquidimmersed DIN EN High-voltage fuses Part 1: Current-limiting fuses VDE s VDE 0670 DIN EN Different issue dates Graphical symbols for diagrams DIN EN Low-voltage switchgear and control gear DIN EN Wind turbine generator systems Part 21: Measurement and assessment of power quality characteristics of grid-connected wind turbines VDE 0660 VDE DIN EN Instrument See also DIN EN VDE 0414

8 364 Appendix VDE classification VDE Earthing of special high-voltage installations with nominal voltages above 1 kv VDE Definitions for cables with nominal voltages above 0.6/1 kv with specila applications [Festlegungen für Starkstromkabel ab 0,6/1 kv für besondere Anwendungen] VDE Electric cables current carrying capacity, general conditions, calculation factors [Strombelastbarkeit, Allgemeines; Umrechnungsfaktoren] VDE Definitions for cables and isolated lines General conditions [Begriffe für Starkstromkabel und isolierte Starkstromleitungen Allgemeine Begriffe] VDE 0414 Different issue dates Instrument DIN EN DIN EN VDE Power Part 2: Temperature rise for liquid-immersed DIN EN