CATALOGUE OF STANDARDS OF CENELEC / TC9X January Documents directly steered by TC 9X 2, 3, 4, 5. Documents steered by CLC / SC 9XA 6, 7
|
|
- Louisa Thornton
- 6 years ago
- Views:
Transcription
1 Title of TC9X: Electrical and electronic applications for railways. CLC/TC9X/Sec/679/INF Scope of TC9X: Standardisation of electrical and electronic systems, equipment and associated software for use in all railway applications, whether on vehicles or fixed installations, including urban transport Documents Pages Documents directly steered by TC 9X 2, 3, 4, 5 Documents steered by CLC / SC 9XA 6, 7 Documents steered by CLC / SC 9XB 8, 9, 10 Documents steered by CLC / SC 9XC 11, 12, 13, 14, 15 codes: : Secretariat enquiry launched : Draft ready for CLC enquiry : Draft ready for vote : Draft ratified page 1
2 Documents directly steered by TC 9X EN (RA) Electronic equipment used on rolling stock M/024+ X Published (2001) IEC (2 nd edition) + AA X Published (2002) EN revised X Published (2007) Transferred to SC9XB EN (RA) Mounting of electronic equipment X Published (1999) Withdrawn EN (RA) Electronic power convertors for rolling stock M/024 X Withdrawn IEC EN X Published (2006) Revision x Results of CDV to be considered Maintenance cycle (RA) Electromagnetic compatibility (EMC) - EN Part 1: General M/024+ X Published (2000) IEC EN Part 2: Emission of the whole railway system to the outside world M/024+ X Published (2000) IEC Part 3: Rolling stock - X EN Train and complete vehicle M/024+ X Published (2000) IEC EN Rolling stock apparatus M/024+ X Published (2000) IEC EN Part 4: Signalling, communications M/024+ x Published (2000) IEC EN Part 5: Fixed installations M/024+ x Published (2000) IEC WG 9 Revision of the series x Published (2006) All parts: x Corrigenda to refer only to the latest EMC Directive 2004/108/EC Published (2008) WG 18 All parts: revision x 14/10 CLC enquiry in progress R (ex ) EN (renumbering into EN ). (RA) Guide to the specification of a guided transport system x Published (1998) Withdrawn (2006) (RA) The Specification and Demonstration of Reliability, M/024+ x Published (1999) Availability, Maintainability and Safety (RAMS) Corrigendum published (2006) WG 8 TR Application guide for safety x Published (2007) EN (2 nd edition) (RA) Supply voltages of traction systems M/275 x Published (2004) IEC page 2
3 Documents directly steered by TC 9X (continuation) (RA) Insulation coordination - EN Part 1 Basic requirements Clearances and creepage M/024+ x Published (2001) distances for all electrical and electronic equipment EN / Addition of an informative annex to EN (Application guide on x Published (2003) A1 insulation coordination and creepage distances) EN / Revision of Tables A.2, B.1 and D.1 x Published (2005) A2 EN Corrigendum Published (2007) WG20 Revision Pending BT approval EN Part 2 Overvoltages and related protections M/024+ x Published (2001) (RA) Environmental conditions for equipment - EN Part 1 Equipment on board rolling stock M/275 x Published (1999) EN Part 2 Equipment in fixed installations M/275 x Published (2002) EN Part 3 Equipment for signalling and communications M/275 x Published (2003) R (RA) Guide for the use of the terminology for testing procedures x Published (1998) Withdrawn (2006) WG 10 EN (RA) Human exposure to electromagnetic fields x Published (2008) Revision Pending BT approval WG 11 EN (RA) Energy measurement on board trains Extension of scope decided pren (RA) Energy measurement on board trains 1 Part 1 General pren (RA) Energy measurement on board trains 2 Part 2 Energy meter pren (RA) Energy measurement on board trains 3 Part 3 Input/output interfaces pren (RA) Energy measurement on board trains 4 Part 4 Communication onboard/ground pren (RA) Energy measurement on board trains 5 Part 5 Conformance testing procedure WG11 prts Specification and verification of energy consumption for railway rolling stock. x Published (2007) x 12/09 Published (2012) x 12/09 Published (2012) x 12/09 Published (2012) x 12/09 Published (2012) x 12/09 Published (2012) x Published (2013) page 3
4 Documents directly steered by TC 9X (continuation) WG 12 TR (RA) Driver's cab train display controller (TDC) Part 1 : General architecture x Published (2010) Revision x Draft sent to CCMC WG 13 pren (RA) Requirements to provide running capability in case of fire on board of rolling stock (PR=20779) WG 14 pren pren pren pren (RA) The specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Full revision according to SG14 results. x Published (2012) x 14/02 Comments from CLC enquiry to be considered. SG 14 Extension of scope of safety related standards x Work finished Ad-hoc group IEC IEC EN (RA) Electric equipment for rolling stock Electrotechnical components Rules for d.c. (Part 3) and a.c. (Part 4) circuit-breakers To produce a contribution, based on Modtrain results, to IEC to be conveyed through a National Committee, for the maintenance of these Standards (RA) - Automated urban guided transport (AUGT) - Safety requirements Work item cancelled. Group disbanded x Published (2009) EN (RA) - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts Published Revision x Results of CDV to be considered EN (RA) - Urban guided transport management and command/control systems - Part 2: Functional requirements specification x Published (2011) Revision x Results of CDV to be considered pren Electronic railway equipment - Train communication network - Part 1: TCN - Train Communication Network general architecture x Published (2012) pren pren pren pren Electronic railway equipment - Train communication network - Part 2-1: WTB - Wire Train Bus Electronic railway equipment - Train communication network - Part 2-2: WTB - Wire Train Bus conformance testing Electronic railway equipment - Train Communication Network - Part 2-3: TCN communication profile Electronic railway equipment - Train communication network - Part 2-5: Ethernet Train Backbone x Published (2012) x Published (2012) x Results from CDV to be considered x CDV in progress page 4
5 Documents directly steered by TC 9X (continuation). pren pren pren pren pren Electronic railway equipment - Train communication network - Part 3-1: MVB - Multipurpose Vehicle Bus Electronic railway equipment - Train communication network - Part 3-2: MVB - Multipurpose Vehicle Bus conformance testing Electronic railway equipment - Train communication network - Part 3-3: CCN - CANopen Consist Network bus Electronic railway equipment - Train communication network - Part 3-4: ECN - Ethernet Consist Network Electronic railway equipment - On board driving data recording system - Part 1: System specification WG15 TR (RA) Rolling Stock Functional Interface Specification (FIS) between the Train Control and Monitoring System (TCMS) and the pantograph WG15 TR (RA) Rolling Stock Functional Interface Specification (FIS) between the Train Control and Monitoring System (TCMS) and the doors WG15 TR (RA) Rolling Stock Functional Interface Specification (FIS) Trainmodess EN EN (RA) - Electric traction - Short-primary type linear induction motors fed by power converters Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General Architecture x Published (2012) x Published (2012) x Published (2012) x Results from CDV to be considered Published (2013) x Final draft submitted to CCMC x Final draft submitted to CCMC 14/02 Work in progress x Published (2011) x Results from CDV to be considered page 5
6 Documents steered by SC 9XA (Signalling) (RA) Communication, signalling and processing systems - EN Software for railway control and protection systems + x Published (2001) IEC WG A11 pren Revision decided x Published (2011) See EN (RA) Communication, signalling and processing systems - EN Safety related electronic systems for signalling + x Published (2003) Revision See EN WG A2-3 Application guide for EN split in two parts (see below) WG A2-3 TR Guide for cross-acceptance (former chapter 8) x Published (2007) WG A2-3 TR Guide for safety assurance (other chapters) x Published (2009) (RA) Communication, signalling and processing systems - EN Safety related communication in closed transmission systems M/275 x Published (2001) EN Safety related communication in open transmission systems M/275 x Published (2001) WG A12 EN Revision of both parts to be merged in a single standard x Published (2010) (RA) Communication, signalling and processing systems - Compatibility between rolling stock and train detection systems M/275 x Published (2003) EN General WG A4-2 TS Compatibility with track circuits x Published (2011) TS Revision decided (SC9XA decision 39/1) 14/06 Work started TS Compatibility with axle counters x Published (2011) TS Revision to consider a comment from Croatian NC x Published (2013) TS 50xxx Characteristics of trackside train detection systems 09/12 No input from ERA Cancelled TR Interference limits of existing track circuits on European railways x Published (2007) WG A4-2 (RA) - Basic parameters of train detection systems pren Part 1: Track circuits x 14/07 Results from CLC enquiry to be considered pren Part 2: Axle counters x 14/07 Results from CLC enquiry to be considered (RA) Communication, signalling and processing systems - EN Radio remote control system of traction vehicle for freight traffic M/024 x Published (1999) SE & RO corrigendum to include their national conditions x Published (2010) EN see EMC in page 2 EN see environmental conditions for equipment in page 3 WG A9-D TS Functional aspects of driver-machine interface M/275 x Published 2005 to 6 TS Revision decided (SC9XA decision 39/2) 14/04 Work started TS /07 to 4 WG A9-D TR Part 7: Specific Transmission Modules x Published 2007 WG A9-D TR External signalling for lines equipped with ERTMS Level 2 x Published page 6
7 Documents steered by SC 9XA (Signalling) (continuation) x pr EN Definition of track-side objects in addition to cab-signalling x Voted, ratification on hold R Systematic allocation of safety integrity requirements x Published (2001) TR Supersedes R x Published (2007) TR Radio remote control system of traction vehicle for freight traffic in x Published (2007) multiple traction operation WG A13 pren RA Signalling relays (Conversion of UIC leaflet 736) x x Published (2013). New ERA RfS transferred to CEN/TC256 page 7
8 Documents steered by SC 9XB (Rolling stock) EN Ed3 EN (RA) Rolling stock Traction transformers and inductors M/024 x EN following // vote. Published (2004) (RA) Electric equipment for rolling stock Rules for power resistors of open construction x EN following // vote. Published (2001) EN (RA) Rolling stock equipment Shock and vibration tests x EN following // vote. Published (1999) Revision x Published (2010) EN (RA) Rolling stock equipment Capacitors for power electronics x EN following // vote. Published (1999) EN Part 1: Paper/plastic film capacitors x Published (2011) EN Part 2: Aluminium electrolytic capacitors with non solid electrolyte x Published (2012) EN Part 3: Electric double-layer capacitors x Published (2012) Amd A1 x Published (2013) IEC : 2004 IEC IEC IEC (RA) Rolling stock Rotating electrical machines for rail and road vehicles - EN Part 1: Machines other than electronic convertor-fed a.c. motors x EN following // vote. IEC Published (2000) + A1 x Published (2002) IEC Revision x Published (2010) EN Part 2: Electronic convertor fed a.c. motors M/024 x Published (2001) IEC : 1993, modified Revision x Published (2010) TS EN Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter x Published (2010) IEC/TS : 2010 x Published (2013) page 8
9 Documents steered by SC 9XB (Rolling stock) (continuation) EN EN EN (RA) Rolling stock Combined testing of inverter-fed alternating current motors and their controls (RA) Rolling stock Combined testing Part 2 : Chopper-fed d.c. traction motors and their control (RA) Rolling stock Combined testing Part 2 : a.c. traction motors fed by an indirect convertor and their control. x Published (2006) IEC x EN following // vote. Published (2002) x EN following // vote. Published (2002) IEC IEC EN (2 nd Ed) (RA) Rolling stock Protective provisions relating to electrical hazards x Published (2002) IEC WGB12 (3 rd Ed) Revision 13/09 Vote in progress. (RA) Rolling stock Pantographs : Characteristics and tests - EN Part 1: Pantographs for main line vehicles M/024 + x Published (1998) IEC WGB16 Maintenance x Published (2010) EN Part 2: Pantographs for metros and light rail vehicles M/024 x Published (1999) IEC WGB16 Maintenance x Published (2010) WGB16 TS Interface between pantograph and rolling stock for rail vehicles x Published (2010) WGB16 (RA) Rolling stock Interface between TCMS and Pantographs zero EN (RA) Rolling stock Testing of rolling stock after completion of construction and before entry into service M/024 + x Published (1999) TC256 IEC WG-B5 Revision x Published (2009) IEC revised EN (RA) Rolling stock D.C. supplied electronic ballasts for lighting fluorescent lamps for rolling stock x Published (2003) IEC/SC34C CLC/TC34Z IEC Ed.1: published EN (RA) Rolling stock Rules for cabling of vehicles x Published (2003) TC20 / WG12 WG B8 Revision x Voted page 9
10 Documents steered by SC 9XB (Rolling stock) (continuation). Comments WG B9 EN x (RA) Rolling stock Reliability tests for high power semiconductor All parts stopped devices Part 1 : Standard base-plate modules Part 1 : Standard base-plate modules Part 2 : Integrated water-cooled modules Part 3 : Multi-chip Presspack EN RA) Environmental conditions for equipment - Part 1 -Rolling stock and on-board equipment WG B27 Revision x Vote in progress EN see EMC in page 2 EN see EMC in page 2 WG B10 EN (RA) Rolling Stock Pantographs, testing methods for carbon x Published (2006) disbanded contact strips WG B28 Revision 14/06 15/10 Work started WG B11 TR (RA) The specification and demonstration of Reliability, Availability, Maintenability and Safety (RAMS) Part 3: Guide to the application of EN for rolling stock RAM x Published (2006) TC 256, WG 5B Revision decided x Published (2008) EN (RA) Rolling Stock General service conditions and general rules M/024 x Published (2002) IEC EN (RA) Rolling Stock Electrotechnical components General rules x Published (2002) IEC EN (RA) Electric equipment for rolling stock Part 3 : Rules for DC circuit-breakers x EN following // vote. Published (2002) IEC EN EN (RA) Electric equipment for rolling stock Part 4 : Rules for AC circuit-breakers (RA) Electric equipment for rolling stock Part 5 : Electrotechnical components Rules for HV fuses x EN following // vote. Published (2003) x EN following // vote. Published (2003) TS (RA) Rolling Stock Electrical connectors x Published (2008) SG B17 Survey group to decide about a normative annexb and move to EN WG B13 EN RA) Rolling Stock Electrical connectors x Published (2011) Links IEC IEC page 10
11 Documents steered by SC 9XB (Rolling stock) (continuation) Comments WG B14 (RA) Rolling Stock Intercommunication between vehicles and train/wayside TR Part 1 : Data dictionary and rules for functional standardisation x Published (2007) Links TR Part 2 : Technical contents of standardization work in the field of Published (2012) intercommunication WG B15 TS (RA) Rolling Stock Requirements for electrical equipment on board trolleybuses and main characteristics of the connection system to the overhead contact line x Published (2007) Revision decided to take into account German and Polish comments x Published (2008) EN Revision for conversion of the TS into an EN 13/07 14/10 CLC enquiry in porgress WG B18 EN (RA) Rolling Stock Three-phase train line voltage characteristics x Published (2011) WG B19 TS (RA) Rolling Stock Shore (external) supply system for rail x Published (2013) vehicles WG B20 EN (RA) Rolling Stock Batteries for auxiliary power supply systems. x Published (2013) TS (RA) Rolling Stock Generic System Architecture for onboard x Published (2010) electric supply systems. WG B23 TS (RA) Rolling Stock Mounted parts of the traction transformer and cooling system Part 1 HV bushing for traction transformers x Published (2010) WG B24 TS Part 2 Pump for insulating liquid for traction transformers and x Published (2010) reactors WG B25 TS Part 3 Coolant (water) pump for traction transformers x Published (2010) WG B26 TS Part 4 Gas and oil actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles x Published (2010) WG B21 TS (RA) Rolling Stock Onboard auxiliary power converter systems. x Published (2010) WG B29 pren (RA) Electronic equipment used on rolling stock Revision to be consistant with revised EN series pren (RA) - Testing of rolling stock for compatibility with axle counters by measurement against defined limit values 14/06 14/12 16/03 Work in progress 14/06 15/10 Work in progress page 11
12 Documents steered by SC 9XC (Fixed installations) (RA) Fixed installations- Electrical safety, earthing and bonding - EN Part 1: Protective provisions relating to electrical safety and earthing M/024+ x Published (1997) IEC WGC1 Revision Part 1 : Protective provisions against electric shock x Published (2011) Amendment A1 Corrigendum x x Published (2011) Published (2012) EN Part 2: Protective provisions against the effects of stray currents M/024+ x Published (2011) IEC caused by d.c. traction systems Amendment A1 x Published (2002) WGC1 Revision Part 2 : Provisions against the effects of stray currents caused by x Published (2010) d.c. traction systems WGC1 EN Part 3: Mutual interaction of a.c. and d.c. traction systems x Published (2010) IEC EN (RA) Fixed installations Electric traction overhead contact lines M/024+ x Published (2001) Revision Revision x Published (2009) IEC WG C13 Amendment x Published (2013) EN (RA) Fixed installations Copper and copper-alloy grooved contact M/024+ x Published (2001) wires for overhead contact lines Corrigendum Published (2011) WG-C13 Revision Revision x x Published (2012) EN (RA) Fixed installations Special requirements for composite insulators WG C15 EN (RA) Fixed installations Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines. M/024 x Published (2003) CLC / TC 36 IEC x Published (2009) IEC (RA) Fixed installations a.c. switchgear Particular requirements for a.c. switchgear - EN Part 1: Single phase circuit breakers with U m above 1000V M/024 x Published (2007) IEC Revision Revision x Published (2012) WGC 18 Amendment A1 x 13/10 Published (2013) EN Part 2: Single phase disconnectors, earthing switches and switches with U m above 1000V M/024 x Published (2007) IEC WGC 18 Revision Revision x Published (2012) EN Part 3: Measurement, control and protection devices for specific use in a.c. traction systems - EN Part 3-1 : Application guide x Published (2003) IEC EN Part 3-2: single-phase current transformers x Published (2001) IEC EN Part 3-3: single-phase voltage transformers x Published (2001) IEC page 12
13 Documents steered by SC 9XC (Fixed installations) (continuation). Comments (RA) Fixed installations - d.c. switchgear - EN Part 1: General M/024+ x Published (2003) IEC EN Part 2: d.c. circuit breakers M/024 x Published (2003) IEC EN Part 3: Indoor d.c. disconnectors and switch disconnectors M/024 x Published (2003) IEC Amendment A1 x 13/10 Published (2013) EN Part 4: Outdoor d.c. in-line switch-disconnectors and d.c. earthing M/024 x Published (2003) IEC switches Amendment A1 x 13/10 Published (2013) EN Part 5: Surge arresters and low- voltage limiters for specific use in d.c. traction systems x Published (2003) To be replaced by EN Links IEC EN Part 6: d.c. switchgear assemblies M/024 x Published (2003) IEC WG C18 Amendment A1 x 14/07 Results from CLC enquiry to be considered EN Part 7: Measurement, control and protection devices for specific use in d.c. traction systems EN Part 7-1: Application guide x Published (2003) IEC EN Part 7-2: Isolating current transducers and other current x Published (2003) IEC measuring devices EN Part 7-3: Isolating voltage transducers and other voltage measuring devices x Published (2003) IEC (RA) - Fixed Installations d.c. surge arresters and voltage limiting devices: pren Part 1 - Surge arresters - to supersede EN x Published (2012) WG C16 pren Part 2 - Voltage limiting devices - to replace the proposed EN x 13/09 Ratified WG C16 pren Part 3 Application guide 14/02 15/06 Work in progress page 13
14 Documents steered by SC 9XC (Fixed installations) (continuation) EN see EMC in page 2 EN EN EN Comments (RA) - Fixed installations Harmonization of the rated values for converter groups and tests on converter groups x Published (2003) IEC Amendment A1 x Published (2005) (RA) - Fixed installations Electronic power converters for substations (RA) - Fixed installations - Current collection systems - Validation of simulation of the dynamic interaction between overhead contact line and pantograph Links x Published (2003) IEC M/275 x Published (2002) EN (RA) - Fixed installations - Current collection systems - Requirements M/275 x Published (2002) for and validation of measurements of the dynamic interaction between pantograph and overhead contact line Amendment A1 x Published (2004) Amendment A2 x Published (2007) Revision Revision x Published (2012) Corrigendum x Published (2012) EN see Environmental conditons for equipment in page 3 EN (RA) - Technical criteria for the interaction between pantograph and overhead contact lines (to achieve free access) M/275 x Published (2006) IEC WG C9 Revision x Published (2012) EN (RA) - Fixed installations - Traction transformers x Published (2003) Corrigendum Published (2006) WG C10 Amendment x Published (2010) WGC 17 TS (RA) Fixed installation Process, measures and demonstration of safety for electric traction systems x Published (2011) IEC page 14
15 Documents steered by SC 9XC (Fixed installations) (continuation). EN (RA) - Power supply, and rolling stock - Technical criteria for the coordination between power supply and rolling stock to achieve interoperability - M/275 x Published (2005) IEC WG C11 Revision x Published (2012) Corrigendum x Published (2012) Corrigendum x Published (2013) EN (RA) Supply voltages of traction systems, See in page 3 x Published (2007) IEC WG C11 praa Amendment decided x Published (2007) Corrigendum x Published (2013) EN (RA) - Fixed installations - Effects of electromagnetic interferences caused by a.c. railway lines on pipelines - Admissible values and protection measures WG C14 TR (RA) - Fixed installations - Electric traction Safety measures for personnel working near Overhead Contact Lines WG C20 pren50xxx (RA) - Fixed installations - Requirements for the validation of simulation tools used for the design of traction power supply systems x Published (2011) x Published (2006) x 14/06 Secretariat enquiry done WG C21 pren50xxx (RA) - Fixed installations - Protection principles for electric traction systems 14/02 15/06 Work in progress WG C22 prtr50xxx (RA) - Specification for reversible direct current substations x 13/12 Secretariat enquiry done page 15
This document is a preview generated by EVS
TECHNICAL SPECIFICATION CLC/TS 50535 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION April 2010 ICS 45.060.01 English version Railway applications - Onboard auxiliary power converter systems Applications
More informationEnglish version of. Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr af 30. november 2012) Preface
English version of Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr. 1127 af 30. november 2012) Preface Please note that the English version is for informational
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60470 Second edition 1999-10 High-voltage alternating current contactors and contactor-based motor-starters Contacteurs pour courants alternatifs haute tension et démarreurs
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62271-102 First edition 2001-12 High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches This English-language version is derived
More informationCouncil of the European Union Brussels, 18 July 2014 (OR. en)
Council of the European Union Brussels, 18 July 2014 (OR. en) 11932/14 ADD 1 TRANS 367 COVER NOTE From: European Commission date of receipt: 9 July 2014 To: General Secretariat of the Council No. Cion
More informationE-15 Uninterruptible Power Systems (UPS)
Guideline No.E-15 (201510) E-15 Uninterruptible Power Systems (UPS) Issued date:20 October, 2015 China Classification Society Foreword This Guide is a part of CCS Rules, which contains technical requirements,
More informationCEN TC256 WG01 PROGRESS: SHARING LATEST PROGRESS ON THE WORK DONE BY CEN TC256 WG01 ON THE EUROPEAN STANDARD EN45545
CEN TC256 WG01 PROGRESS: SHARING LATEST PROGRESS ON THE WORK DONE BY CEN TC256 WG01 ON THE EUROPEAN STANDARD EN45545 IV INTERNATIONAL CONFERENCE MODERN TRENDS OF FIRE PROTECTION IN ROLLING STOCK WARSAW
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION CLC/TS 50537-3 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION February 2010 ICS 29.180; 45.060.10 English version Railway applications - Mounted parts of the traction transformer
More informationE-15 Uninterruptible Power Systems (UPS)
Guideline No.E-15 (201705) E-15 Uninterruptible Power Systems (UPS) Issued date: May 9, 2017 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical requirements,
More information(Non-legislative acts) DECISIONS
14.5.2011 Official Journal of the European Union L 126/1 II (Non-legislative acts) DECISIONS COMMISSION DECISION of 26 April 2011 concerning a technical specification for interoperability relating to the
More informationAustralian Standard. Uninterruptible power systems (UPS) Part 1.1: General and safety requirements for UPS used in operator access areas
AS 62040.1.1 2003 IEC 62040-1-1:2002 IEC 62040-1-1:2002/Corr.1:2002 Reconfirmed 2013 AS 62040.1.1 Australian Standard Uninterruptible power systems (UPS) Part 1.1: General and safety requirements for UPS
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61851-1 First edition 2001-01 Electric vehicle conductive charging system Part 1: General requirements Dispositif de charge conductive pour véhicules électriques Partie 1: Prescriptions
More informationCENELEC TECHNICAL COMMITTEE TC9X
GB Involvement in the Development of Euronorms in the Field of Railway Applications CENELEC TECHNICAL COMMITTEE TC9X Introduction This document contains an organisation chart showing the structure of CLC
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60034-1 Eleventh edition 2004-04 Rotating electrical machines Part 1: Rating and performance This English-language version is derived from the original bilingual publication
More informationPOSITION PAPER Version 3.0
POSITION PAPER Version 3.0 Revision of the Technical Specification for Interoperability / Energy (ENE) Brussels, September 26 th, 2012 1. REFERENCE DOCUMENT UNION RAIL SYSTEM - SUBSYSTEM Energy - TSI Energy
More informationINTEROPERABILITY UNIT TRANS-EUROPEAN CONVENTIONAL RAIL SYSTEM SUBSYSTEM ENERGY
INTEROPERABILITY UNIT TRANS-EUROPEAN CONVENTIONAL RAIL SYSTEM SUBSYSTEM ENERGY Reference: IU-ENE-071221-TSI 2.1 Document Type: Version: Title: 2.1 - Draft Technical Specification of Interoperability Preliminary
More information3 RD RAIL SWITCH FHT-KS 4000 DISCONNECTOR
3 RD RAIL SWITCH FHT-KS 4000 DISCONNECTOR www.kraus.com www.kraus.com KRAUS RAILWAY TECHNOLOGY PRODUCT LINE Pantograph Switches Trackside Disconnectors Disconnectors & Earthing Switches Pneumatic Interlock
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62257-9-2 First edition 2006-10 Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-2: Microgrids IEC 2006 Copyright - all rights
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50119:2002 Raudteealased rakendused. Püsipaigaldised. Elektrifitseeritud raudtee kontaktvõrk Railway applications - Fixed installations - Electric traction overhead contact lines
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of
More informationEMC for E-mobility. William Radasky presenting for Jacques Delaballe, IEC TC 69 Chair. APEMC Symposium Seoul, June 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION EMC for E-mobility William Radasky presenting for Jacques Delaballe, IEC TC 69 Chair APEMC Symposium Seoul, June 2017 1 Outline IEC bodies involved Situation regarding
More informationISO INTERNATIONAL STANDARD. Seal-less rotodynamic pumps Class II Specification
INTERNATIONAL STANDARD ISO 15783 First edition 2002-02-01 Seal-less rotodynamic pumps Class II Specification Pompes rotodynamiques sans dispositif d'étanchéité d'arbre Classe II Spécifications Reference
More informationGuide for the application of the CR ENE TSI
European Railway Agency According to Framework Mandate C(2007)3371 final of 13/07/2007 Reference in ERA: ERA/GUI/07-2011/INT Version in ERA: 1.00 Date: 26 August 2011 Document prepared by Document type:
More informationIssue Title Remarks. Instrument transformers See IEC 61869
357 Appendix Norms and Standards As far as norms and standards are mentioned in this book, the respective citation of IEC or DIN EN is given. If IEC-standards or DIN EN-norms are not available, the European
More informationIndicativul și titlul standardului doc.
N/o Data votării Comitetul Tehnic Indicativul și titlul standardului Tipul doc. Pro (P) Contra (C) Votul Abținere (A) Total voturi Votul final (P, C, A) Comentarii Da Nu 1. 2012 04 12 TC 88 IEC 61400 23
More informationParticular requirements (apply as applicable to luminaire type) Emergency Escape Lighting and Exit Signs for Buildings
LUMINAIRES IEC and AS/NZS 60598.1 Luminaires General requirements and tests IEC and AS/NZS 60598.2 Particular requirements (apply as applicable to luminaire type) IEC CISPR 15, EN 55015 and AS/NZS CISPR
More informationSWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED)
PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Issue 3 2012 SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) www.energynetworks.org 2012 Energy Networks
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 60034-25 Second edition 2007-03 Rotating electrical machines Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply IEC
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60092-503 Second edition 2007-06 Electrical installations in ships Part 503: Special features AC supply systems with voltages in the range of above 1 kv up to and including 15
More informationTECHNICAL SPECIFICATION
IEC/TS 62257-7-3 TECHNICAL SPECIFICATION Edition 1.0 2008-04 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set Selection of generator sets
More informationIEC TC SC E 22 F G H (UPS) A 77 B C khz 77A JIS C , A B JIS C JIS C 2136 (1/8)
2 15 22 77 85 112 27 11 12 () 1 1 IEC TC SC 2 2 15 15 22 E 22 F G H (UPS) 77 A 77 B C 85 85 112 112 JIS JIS 2 2 22 77A JIS C 61000-4-16, -34 77B JIS C 61000-4-6 112 JIS C 2136 4 16 150 khz 4-34 16 A 4-6
More informationGB/T / IEC :2007
Translated English of Chinese Standard: GB/T16935.1-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.120 K 30 GB/T 16935.1-2008 / IEC
More information(Text with EEA relevance)
L 150/10 COMMISSION REGULATION (EU) 2015/924 of 8 June 2015 amending Regulation (EU) No 321/2013 concerning the technical specification for interoperability relating to the rolling stock freight wagons
More informationItem 1: Contents of the complete training & CV of the lecturer
Course DESIGN CONCEPTS + software SwitchgearDesign for SWITCHGEAR, SWITCHBOARDS, BUSDUCTS & SUBSTATIONS" Item 1: Contents of the complete training & CV of the lecturer Presented by Sergio Feitoza Costa
More informationTraction Systems GC01DTR01_C 08/2013. Ingeteam Traction
Traction Systems GC01DTR01_C 08/2013 Ingeteam Traction traction@ingeteam.com Vehicle control unit (VCU) Human machine interface (HMI) Traction converter Auxiliary converter INGETEAM Traction designs and
More informationEUROPEAN UNION AGENCY FOR RAILWAYS Annex 1 006REC1025 V 1.0
Annex 1: Amendments to the technical specification for interoperability relating to the rolling stock locomotives and passenger rolling stock subsystem of the rail system in the European Union (Annex to
More informationISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
More informationPRE-RELEASE VERSION (FDIS)
IEC 61238-1-1 Edition 1.0 2018-02 PRE-RELEASE VERSION (FDIS) Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression and mechanical connectors for
More informationINTERNATIONAL STANDARD
IEC/IEEE 80005-1 Edition 2.0 2019-03 INTERNATIONAL STANDARD colour inside Utility connections in port Part 1: High voltage shore connection (HVSC) systems General requirements INTERNATIONAL ELECTROTECHNICAL
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60384-14 QC 302400 Third edition 2005-07 Fixed capacitors for use in electronic equipment Part 14: Sectional specification: Fixed capacitors for electromagnetic interference
More informationInternational Electrotechnical Commission (IEC) Technical Committee 82 reported by the Secretary
International Electrotechnical Commission (IEC) Technical Committee 82 reported by the Secretary Presented at the National and International Standards Coordination Panel Meeting Golden, Colorado June 3,
More informationEMC for E-mobility. William Radasky presenting for Jacques Delaballe IEC TC 69 representative in ACEC. APEMC Symposium May 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION EMC for E-mobility William Radasky presenting for Jacques Delaballe IEC TC 69 representative in ACEC APEMC Symposium May 2015 1 Outline IEC bodies involved Situation
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7176-21 Second edition 2009-04-01 Wheelchairs Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60269-1 Edition 3.1 2005-04 Edition 3:1998 consolidated with amendment 1:2005 Low-voltage fuses Part 1: General requirements IEC 2005 Copyright - all rights reserved No part
More informationAn Overview of Automotive EMC Standards & Emerging Requirements
An Overview of Automotive EMC Standards & Emerging Requirements 2015. 5. 29 Korea Automobile Testing & Research Institute (KATRI) TOPICs 1. Automotive Electronics of the Future 2. Automotive EMC Standards
More informationSmall craft Electric propulsion system
INTERNATIONAL STANDARD ISO 16315 First edition 2016-03-15 Small craft Electric propulsion system Petits navires Système de propulsion électrique Reference number ISO 16315:2016(E) ISO 2016 ISO 16315:2016(E)
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31488-0 SOUTH AFRICAN NATIONAL STANDARD Switchgear Metal-enclosed ring main units for rated a.c. voltages above 1 kv and up to and including 36 kv WARNING This document references other
More informationSD, SE, SDE, SCO series Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches,
4 Electrics for Rolling Stock Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches, Change-Over-Switches 600 V to 3 kv Catalogue F84.en
More informationInteroperability TSIs applicable to Railway vehicles. Innotrans, September, 2010
Interoperability TSIs applicable to Railway vehicles Innotrans, 21-24 September, 2010 1. Purpose of the presentation 2. Geographical scope (Directives and TSIs) 3. Technical scope of TSIs 4. TSIs applicable
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11068-09-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 10.07.2014 to 09.07.2019 Holder of certificate: Karlsruher
More informationQUESTION / CLARIFICATION QC-ENE-001
QUESTION / CLARIFICATION QC-ENE-001 CO-ORDINATION BETWEEN NOTIFIED BODIES DIRECTIVES 96/48/EC AND 2001/16/EC ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN HIGH-SPEED AND CONVENTIONAL RAILWAY SYSTEMS Issue
More informationISO INTERNATIONAL STANDARD. Road vehicles Test methods for electrical disturbances from electrostatic discharge
INTERNATIONAL STANDARD ISO 10605 First edition 2001-12-15 Road vehicles Test methods for electrical disturbances from electrostatic discharge Véhicules routiers Méthodes d'essai des perturbations électriques
More informationLIST OF PUBLISHED STANDARDS
Report : 08-06-08 Page o : Of 8 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 069 SS 959-:06/RS 05-:0.0 Photovoltaic systems for use in individual homes, schools and clinics Part : 06--8
More informationSYSTEM INTEGRATION. Railway and urban transport electrification Energy-efficient and reliable solutions
SYSTEM INTEGRATION Railway and urban transport electrification Energy-efficient and reliable solutions 2 R A I LWAY & U R B A N T R A N S P O R T E L E C T R I F I C AT I O N S O L U T I O N S ABB s substation
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10924-1 Second edition 2016-04-01 Road vehicles Circuit breakers Part 1: Definitions and general test requirements Véhicules routiers Coupe-circuits Partie 1: Définitions et
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION CLC/TS 50457-1 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION March 2008 ICS 43.120 Supersedes ENV 50275-2-3:1998 English version Conductive charging for electric vehicles - Part
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50367:2006 Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) Railway applications
More informationELECTRIC TRACTION.
ELECTRIC TRACTION www.koncar.hr MODERNISATION ELECTRIC TRACTION VEHICLES Company KON AR - ELECTRIC VEHICLES Inc. upgrades electric locomotives, electric multiple unit and electric tramcars. Upgrading proceedings
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60383-2 First edition 1993-04 Insulators for overhead lines with a nominal voltage above 1 000 V Part 2: Insulator strings and insulator sets for a.c. systems Definitions, test
More informationTitle Electrical Technical Maintenance Coding System. Reference Number PMP 01 (RIC Standard: EP SP)
Discipline Engineering Standard NSW Category General Title Reference Number PMP 01 (RIC Standard: EP 00 00 00 02 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Mar 05 Standards and
More informationINFORMATIVE TRANSLATION OF EXECUTIVE ORDER no 1465, DATED 5 DECEMBER 2016
INFORMATIVE TRANSLATION OF EXECUTIVE ORDER no 1465, DATED 5 DECEMBER 2016 Please note that this English version is for informational purposes only. Where the wording in the Danish and English versions
More informationEMC for E-mobility FR-PM-1-5. Dr. William Radasky presenting for Jacques Delaballe, IEC TC 69 Chair and Jörg Bärenfänger, TC 69 ACEC Representative
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION EMC for E-mobility FR-PM-1-5 Dr. William Radasky presenting for Jacques Delaballe, IEC TC 69 Chair and Jörg Bärenfänger, TC 69 ACEC Representative IEEE EMC Conference
More informationISO INTERNATIONAL STANDARD. Hoists for the transfer of disabled persons Requirements and test methods
INTERNATIONAL STANDARD ISO 10535 Second edition 2006-12-15 Hoists for the transfer of disabled persons Requirements and test methods Lève-personnes pour transférer des personnes handicapées Exigences et
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 14990-1 First edition 2016-11-01 Earth-moving machinery Electrical safety of machines utilizing electric drives and related components and systems Part 1: General requirements
More informationElectric vehicle charging system
TECHNICAL REFERENCE (ICS 43.120) TECHNICAL REFERENCE FOR Electric vehicle charging system Published by SPRING Singapore 2 Bukit Merah Central Singapore 159835 SPRING Singapore Website: www.spring.gov.sg
More informationA List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment
Appendix B A List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment Note... erence in {} brackets supersede the original references. B.1 INTERNATIONAL ELECTRO-TECHNICAL
More informationApplicable standards in HS Infrastructure subsystem TSI (2008/217/EC)
Applicable standards in HS Infrastructure subsystem TSI (2008/217/EC) ERA 1.0 Page 1/8 Standards or other documents referred to in the HS infrastructure TSI (and therefore mandatory) TSI Sections Characteristics
More informationElectrification and Power Supply. Andrea Nardinocchi Technological Design Department Italferr S.p.A., Rome, Italy
Electrification and Power Supply Andrea Nardinocchi Technological Design Department Italferr S.p.A., Rome, Italy 1 RAILWAY POWER SUPPLY Electrification systems in Europe Electrification design criteria
More information(Non-legislative acts) DECISIONS
26.5.2011 Official Journal of the European Union L 139/1 II (Non-legislative acts) DECISIONS COMMISSION DECISION of 26 April 2011 concerning a technical specification for interoperability relating to the
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10924-2 First edition 2014-02-15 Road vehicles Circuit breakers Part 2: User s guide Véhicules routiers Coupe-circuits Partie 2: Guide de l utilisateur Reference number ISO 10924-2:2014(E)
More informationUNISIG * EEIG ERTMS USERS GROUP * UNIFE
ERTMS/ETCS REF: VERSION: DATE: 17/12/15 Page 1/18 Modification history Issue number date Draft 27.07.99 Draft 01 30.08.99 0.1.1 24.09.99 1.0.0 11.10.99 1.0.1 31.01.2000 1.0.2 14.02.2000 1.0.3 22.02 1.1.0
More informationEconomic and Social Council
United Nations Economic and Social Council Distr.: General 27 December 2018 Original: English Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous Goods
More informationISO/TR TECHNICAL REPORT. Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life
TECHNICAL REPORT ISO/TR 1281-1 First edition 2008-12-01 Rolling s Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life Roulements Notes explicatives sur l'iso 281 Partie
More informationAF series contactors (9 2650)
R E32527 R E39322 contactors General purpose and motor applications AF series contactors (9 2650) 3- & 4-pole contactors General purpose up to 2700 A Motor applications up to 50 hp, 900 kw NEMA Sizes 00
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION IEC/TS 62600-200 Edition 1.0 2013-05 colour inside Marine energy Wave, tidal and other water current converters Part 200: Electricity producing tidal energy converters Power performance
More informationAustralian Standard. Electricity metering equipment (AC) Particular requirements
AS 62053.21 2005 Reconfirmed 2016 AS 62053.21 2005 Australian Standard Electricity metering equipment (AC) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) (IEC 62053-21,
More informationEuropean Railway Agency
European Railway Agency INTEROPERABILITY UNIT REVISION OF THE WAGON TSI TRANS-EUROPEAN CONVENTIONAL RAIL SYSTEM SUBSYSTEM ROLLING STOCK TSI WAGON Reference: Document type: Technical specifications for
More informationN-03 STEERING GEAR CONTROL SYSTEMS
Guideline No.: N-03(201510) N-03 STEERING GEAR CONTROL SYSTEMS Issued date: October 20,2015 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements,
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62257-2 First edition 2004-05 Recommendations for small renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60740-1 First edition 2005-08 Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics IEC 2005 Copyright - all rights reserved No part of
More informationISO 9129 INTERNATIONAL STANDARD. Motorcycles Measurement methods for moments of inertia. Motocycles Méthodes de mesure des moments d'inertie
INTERNATIONAL STANDARD ISO 9129 Second edition 2008-05-15 Motorcycles Measurement methods for moments of inertia Motocycles Méthodes de mesure des moments d'inertie Reference number ISO 2008 PDF disclaimer
More informationEU RO Mutual Recognition Technical Requirements
1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 5. TYPE APPROVAL CERTIFICATE CONTENT... 7 6. APPROVAL DATE AND REVISION NUMBER... 7 7.
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION CLC/TS 50591 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION November 2013 ICS 45.060.10 English version Specification and verification of energy consumption for railway rolling
More informationUnified requirements for systems with voltages above 1 kv up to 15 kv
(1991) (Rev.1 May 2001) (Rev.2 July 2003) (Rev.3 Feb 2015) (Corr.1 June 2018) Unified requirements for systems with voltages above 1 kv up to 15 kv 1. General 1.1 Field of application The following requirements
More informationUIC/ UNIFE Technical Recommendations (TecRec)
UIC/ UNIFE Technical Recommendations (TecRec) An Introduction and Overview Enno Wiebe, Manager Research Projects and Programmes, UIC European Standardisation and Regulation 2 11th UIC Sustainability Conference,
More informationElectroinsulating Footwear and Overboots for Live Working Practical Experience and Evolution of Standards
Electroinsulating Footwear and Overboots for Live Working Practical Experience and Evolution of Standards Marek Łoboda, Bogumił Dudek Polish Committee of Standardization TC 72 Equipment for Live Working
More informationThe Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory
Deutsche GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral Agreements of EA, ILAC and IAF for Mutual Recognition
More informationSimplified rail vehicle authorization in EU through x-acceptance of requirements. Stefan Sollander, Transportstyrelsen (National Safety Authority)
Simplified rail vehicle authorization in EU through x-acceptance of requirements Stefan Sollander, Transportstyrelsen (National Safety Authority) Why Directives and Technical Specifications (TSI) Oslo
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T19751-2005 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.080.01 T 47 GB/T 19751-2005 Hybrid
More informationISO INTERNATIONAL STANDARD. Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction
INTERNATIONAL STANDARD ISO 14126 First edition 1999-09-01 Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction Composites plastiques renforcés de fibres
More informationThe Voice of European Railways POSITION PAPER. Revision of Appendix T of TSI OPE (decision /EU) January 2013
POSITION PAPER Revision of Appendix T of TSI OPE (decision 2012-757/EU) January 2013 1. REFERENCE DOCUMENTS Commission Decision 2012-757/EU concerning the technical specification for interoperabilityrelating
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7637-3 Third edition 2016-07-01 Road vehicles Electrical disturbances from conduction and coupling Part 3: Electrical transient transmission by capacitive and inductive coupling
More informationISO INTERNATIONAL STANDARD. Straight cylindrical involute splines Metric module, side fit Part 2: Dimensions
INTERNATIONAL STANDARD ISO 4156-2 First edition 2005-10-01 Straight cylindrical involute splines Metric module, side fit Part 2: Dimensions Cannelures cylindriques droites à flancs en développante Module
More informationVersion / Status V 2.0 Date Author. Wagon Markings
1. Introduction Wagon Markings Article 4, para 4 of the Safety Directive (2004/49/EG amended by 2008/110/EC) stipulates the responsibility of each manufacturer, maintenance supplier, wagon keeper, service
More informationISO INTERNATIONAL STANDARD. Industrial trucks Verification of stability Part 3: Reach and straddle trucks
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 22915-3 First edition 2008-09-15 Industrial trucks Verification of stability Part 3: Reach and straddle trucks Chariots de manutention Vérification
More informationAF series contactors (9 2650)
R E32527 R E39322 contactors General purpose and motor applications AF series contactors (9 2650) 3- & 4-pole contactors General purpose up to 2700 A Motor applications up to 50 hp, 900 kw NEMA Sizes 00
More informationISO 5700 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5700 Fourth edition 2006-11-15 Tractors for agriculture and forestry Roll-over protective structures (ROPS) Static test method and acceptance conditions Tracteurs agricoles et
More informationB kv Gas-insulated Substations
72.5 145 kv Gas-insulated Substations The increasing demand for electrical power in cities and industrial centres requires the installation of a compact and efficient distribution and transmission network.
More informationSwitchgear and Distribution Systems for Engineers and Technicians
Switchgear and Distribution Systems for Engineers and Technicians WHAT YOU WILL LEARN: How to identify typical characteristics of an industrial distribution system Become familiar with the main components
More information