SOOW 90 C. Portable Cord. Portable Cord 10.2 SOOW 90 C

Transcription

1 10

2

3 SOOW 90 C./;SOOW 90 C/11709 Index1.W&C Energy Products////600v Thermoset Jkt'd SOOW 90 C PR33307V eps Synthetic rubber insulation Thermoset jacket 90 C, 600 V 1. CONDUCTOR: Bare, annealed copper per ASTM B-3, flexible, bunch stranded per UL 62, a separator may be applied over the conductor 2. INSULATION: Synthetic rubber per UL COLOR CODE: Per ICEA Method 1, Table E-1 (up to 21/C) except 3/C which is black, white, green 4. ASSEMBLY: Insulated conductors are cabled with fillers as necessary to make round, a separator is applied over the assembly 5. OVERALL JACKET: Black, oil-resistant thermoset compound per UL STANDARDS: Meets the UL 62 requirements for Type SOOW, also meets CSA requirements for Type SOOW, accepted by MSHA and printed with the manufacturer's P number 7. AMPACITY: Based on a 30 C ambient temperature per 2008 NEC Table 400.5(A), the values are derated (where applicable) according to 2008 NEC Article TEMPERATURE: 90 C 9. VOLTAGE: 600 V For use as portable electrical power and portable control cable. It can be used for ground test or motor leads. Also, it provides heavy-duty service for industrial tools, portable lights, battery chargers and equipment exposed to oils, solvents, flame and grease. s 4A A A A A-1806 D A A A A A A A A A A A A A A A A A A A A A A A A A A Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

4 SOOW 90 C s 4A A , A A A A A A A A A A A A A A A , A , A , A , A A A A A A A A A A A A A , A , A , A , A , A A A A A A A A A Other conductor counts available upon request. Diameters and weights may vary among manufacturers. For yellow jacket add -05 as a suffix to the Part No. (e.g., 4A ). Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.3

5 SOOW 90 C - Non-UL./;SOOW 90 C, Non-UL/14522 Index1.W&C Energy Products////600v Thermoset Jkt'd SOOW 90 C - Non-UL PR33307V eps Synthetic rubber insulation Thermoset jacket 90 C, 600 V 1. CONDUCTOR: Bare, annealed copper per ASTM B-3, flexible, bunch stranded per UL 62, a separator may be applied over the conductor 2. INSULATION: Synthetic rubber per UL COLOR CODE: Per ICEA Method 1, Table E-1 (up to 21/C) except 3/C which is black, white, green 4. ASSEMBLY: Insulated conductors are cabled with fillers as necessary to make round, a separator is applied over the assembly 5. OVERALL JACKET: Black, oil-resistant thermoset compound per UL STANDARDS: Accepted by MSHA and printed with the manufacturer's P number. This product is not UL Listed or CSA Certified 7. AMPACITY: Based on a 30 C ambient temperature per 2008 NEC Table 400.5(A), the values are derated (where applicable) according to 2008 NEC Article TEMPERATURE: 90 C 9. VOLTAGE: 600 V For use as portable electrical power and portable control cable. Can be used for ground test or motor leads. Also can provide heavy-duty service for industrial tools, portable lights, battery chargers and equipment exposed to oils, solvents, flame and grease. s 4A A A A A-0804 D A A A , A A A A A , A , A , A , A A , A , A , Other conductor counts available upon request. Diameters and weights may vary among manufacturers Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

6 Shielded SOOW 90 C./;Shielded SOOW 90 C/11708 Index1.W&C Energy Products////600v Thermoset Jkt'd Shielded SOOW 90 C PR1146V eps Synthetic rubber insulation Thermoset jacket 90 C, 600 V 1. CONDUCTOR: Tin-coated, annealed copper per ASTM B INSULATION: EPR conforming to UL Standard COLOR CODE: Per ICEA Method 1, Table E-1 except 3/C which is black, white, green 4. ASSEMBLY: Insulated conductors are cabled with a suitable lay and fillers as necessary, a separator is applied overall 5. SHIELD: Tin-coated, annealed copper braid with 85% coverage, a separator is applied overall 6. OVERALL JACKET: Black, oil-resistant thermoset compound conforming to UL Standard STANDARDS: UL and CSA Listed 8. AMPACITY: Based on a 30 C ambient temperature per 2008 NEC Table 400.5(A), Column A, the values are derated (where applicable) according to 2008 NEC TEMPERATURE: 90 C 10.VOLTAGE: 600 V For use as portable power and control cable. It can be used for test or motor leads. Also, it provides heavy-duty service for industrial tools, portable lights, battery chargers and equipment exposed to oils, solvents and grease. s Overall Jacket 4DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS Diameters and weights may vary among manufacturers. Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.5

7 SOOW 105 C./;SOOW 105 C/11710 Index1.W&C Energy Products////600v Thermoset Jkt'd SOOW 105 C Thermoset rubber insulation Thermoset polymer jacket Extra flexible, heavy duty 105 C, 600 V 1. CONDUCTOR: Bare, annealed copper per ASTM B-3, stranded per ASTM B INSULATION: Premium grade 105 C thermoset rubber 3. COLOR CODE: Per ICEA Method 1, Table E-1 except 3/C which is black, white, green 4. ASSEMBLY: Insulated conductors are cabled with fillers as necessary to make round, a separator is applied over the assembly 5. OVERALL JACKET: Yellow premium thermoset polymer compound 6. STANDARDS: Meets UL and CSA requirements for 105 C Type SOOW 7. AMPACITY: Based on a 30 C ambient temperature per 2008 NEC Table 400.5(A), the values are derated (where applicable) according to 2008 NEC TEMPERATURE: -50 C to 105 C 9. VOLTAGE: 600 V PR1146V eps To provide portable electrical power for heavy-duty service such as tools, portable lights, battery chargers, and equipment exposed to oils, solvents, grease, moisture and weather. Excellent for low and high temperature service. Overall Jacket s 4AX AX AX D 4AX AX AX AX AX AX AX AX AX AX AX Special water-resistant cable available, UL and CSA; 600 V, 90 C, black (e.g. 4AW-1404A). Diameters and weights may vary among manufacturers Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

8 SJOOW./;SJOOW/11705 Index1.W&C Energy Products////300v Thermoset Jkt'd SJOOW PR33307V eps Synthetic rubber insulation Thermoset jacket 90 C, 300 V 1. CONDUCTOR: Bare, annealed copper per ASTM B-3, flexible, bunch stranded per UL 62, a separator can be applied over the conductor 2. INSULATION: Synthetic rubber per UL COLOR CODE: Per ICEA Method 1, Table E-1 except 3/C which is black, white, green 4. ASSEMBLY: Insulated conductors are cabled with fillers as necessary to make round, a separator is applied over the assembly 5. OVERALL JACKET: Black, oil-resistant thermoset compound per UL STANDARDS: Meets UL and CSA requirements for Type SJOOW 7. AMPACITY: Based on a 30 C ambient temperature per 2008 NEC Table 400.5(A), Column A, the values are derated (where applicable) according to 2008 NEC Article TEMPERATURE: 90 C 9. VOLTAGE: 300 V For use with portable appliances, small motors and tools. Also, for light-load general use in equipment exposed to oils, solvents, flame, grease. s Overall Jacket 4B B B B B B B B B B B B B B B Diameters and weights may vary among manufacturers. Other colors available: Yellow add -05 suffix to Part No. (e.g., 4B ). Orange add -08 suffix to Part No. (e.g., 4B ). For constantly flexing application, add "F" to Part No. (e.g., 4B-1804F). Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.7

9 Carol Brand with TRU-Mark General Cable is pleased to offer the TRU-Mark Sequential Footage Marking System on its Carol Brand line of portable power cords. The TRU-Mark System, which was selected in March 2010 as the Wire & Cable Category winner in the 2010 EC&M Product of the Year competition, sequentially marks every two feet of Carol Brand cord products in descending order from the start of the reel to the core. Our product is TRU-Marked to match reel lengths (250', 500', 1000') with large visible fonts for accuracy with 1% tolerance. Benefits of TRU-Mark: on the reel! measures Carol Brand portable power cables are UL Listed, approved for indoor and outdoor use. When you have a need for portable cord, whether it s plastic, rubber or specialty constructions, think of Carol Demand Better and Expect More with General Cable Carol Brand cord products. We manufacture a complete line of portable cord products. TRU-Mark available on all circuit sizes of SOOW and SJOOW, including Super Vu-Tron Supreme and Super Vu-Tron III 18 to 10 AWG, 2-, 3-, or 4-conductor cables Rubber Cord Plastic Cord Industrial Cord Specialty Cord For more information, contact your local General Cable representative. 4 Tesseneer Drive, Highland Heights, KY Phone: Fax:

10 SJ./;SJ/11704 Index1.W&C Energy Products////300v Thermoset Jkt'd SJ PR33307V eps Synthetic rubber insulation Thermoset jacket 60 C, 300 V 1. CONDUCTOR: Bare, annealed copper per ASTM B-3. Flexible, bunch stranded per UL 62, a separator can be applied over the conductor 2. INSULATION: Synthetic rubber per UL COLOR CODE: Per ICEA Method 1, Table E-1 except 3/C which is black, white, green 4. ASSEMBLY: Insulated conductors are cabled with fillers as necessary to make round, a separator is applied over the assembly 5. OVERALL JACKET: Black, thermosetting rubber 6. STANDARDS: Meets UL and CSA requirements for Type SJ 7. AMPACITY: Based on a 30 C ambient temperature per 2008 NEC Table 400.5(A), Column A, the values are derated (where applicable) according to 2008 NEC Article TEMPERATURE: 60 C 9. VOLTAGE: 300 V For use as power cords on portable tools, major appliances and similar medium-duty applications. s Overall Jacket 4D D D D D D D D D D D D D D D Diameters and weights may vary among manufacturers. Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.9

11 SJT, SVO, SVT, HPN./;SJT, SVO, SVT, HPN/11707 Index1.W&C Energy Products////Other SJT, SVO, SVT, HPN D PR33307V eps 1. CONDUCTOR: Annealed, stranded bare copper per ASTM B-174 or B-3 as applicable 2. INSULATION: Types SJT and SVT: PVC, SVO: EPDM, HPN: neoprene 3. COLOR CODE: 1-black; 2-white; 3-green, HPN: black 4. ASSEMBLY: The applicable number of insulated conductors are cabled together with fillers, as necessary, to form a round cable, HPN is flat parallel 5. OVERALL JACKET: Types SJT and SVT: black PVC, SVO and HPN: black neoprene 6. STANDARDS: UL Listed 7. AMPACITY: Based on a 30 C ambient temperature per 2008 NEC Table 400.5(A), (Column B for SJT, SVO and SVT) 8. TEMPERATURE: Types SJT and SVT: 60 C, SVO and HPN: 90 C 9. VOLTAGE: 300 V To provide portable electrical power for light-duty service such as portable tools, lights, vacuum cleaners, toasters and soldering irons. TYPE SJT s 4DT DT DT DT DT TYPE SVO s 4CV CV TYPE SVT s 4CT TYPE HPN Diameters and weights may vary among manufacturers. s 4J x Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

12 SJTO AND STO./;SJTO and STO/11706 Index1.W&C Energy Products////600v Thermoplastic SJTO and STO PR33307V eps Thermoplastic insulation Thermoplastic jacket 60 C, 300 or 600 V 1. CONDUCTOR: Annealed, bare copper per ASTM B-3, flexible, bunch stranded per UL INSULATION: Polyvinyl Chloride (PVC) per UL COLOR CODE: Per ICEA Method 1, Table E-1 except 3/C which is black, white, green 4. ASSEMBLY: Insulated conductors are cabled with fillers as necessary to make round, a separator is applied over the assembly 5. OVERALL JACKET: Polyvinyl Chloride (PVC) per UL STANDARDS: Meets UL and CSA requirements for Type SJTO or STO 7. AMPACITY: Based on a 30 C ambient temperature per 2008 NEC Table 400.5(A), Column A 8. TEMPERATURE: 60 C 9. VOLTAGE: SJTO, 300 V; STO, 600 V For use as power cords on machine tools, portable power equipment and appliances. TYPE SJTO V Diameters and weights may vary among manufacturers. For flexible strand add "F" suffix to Part No., (e.g., 4AT-1602F). For yellow add -05 suffix to Part No., (e.g., 4BT ). For gray add -09 suffix to Part No., (e.g., 4AT ). s 4BT BT BT BT BT BT BT BT BT BT TYPE STO V Diameters and weights may vary between manufacturers. For flexible strand add "F" suffix to Part No., (e.g., 4AT-1602F). For yellow add -05 suffix to Part No., (e.g., 4BT ). For gray add -09 suffix to Part No., (e.g., 4AT ). s 4AT AT AT AT AT AT AT AT AT AT AT AT AT AT Continued on next page >> Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.11

13 SJTO AND STO (continued) SJTO and STO s 4AT AT AT AT AT AT AT AT AT D Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

14 SEOOW/STOOW./;SEOOW/STOOW/11711 Index1.W&C Energy Products////Other SEOOW/STOOW PR33307V eps TPE insulation TPE jacket -40 C to 105 C, 600 V 1. CONDUCTOR: Bare, annealed Class K stranded copper 2. INSULATION: Oil-resistant thermoplastic elastomer (TPE) 3. COLOR CODE: Per ICEA Method 1, Table E-1 except 3/C which is black, white, green 4. ASSEMBLY: Insulated conductors are cabled together with fillers for maximum flexibility and roundness 5. OVERALL JACKET: Chemical-, oil- and gas-resistant black TPE jacket 6. STANDARDS: Sizes 18 through 10 AWG meet UL and CSA requirements, all sizes meet Federal Specification J-C-580B and are MSHA approved, FT2 flame resistant 7. AMPACITY: Based on a 90 C conductor and a 30 C ambient temperature per NEC Table 400.5(A), the values are derated (where applicable) according to 2008 NEC TEMPERATURE: -40 C to 105 C 9. VOLTAGE: 600 V To provide control and power where exceptional flexibility and abrasion resistance over a wide temperature range is required. For indoor and outdoor use on push button remote controls, industrial robotic systems and other portable tools and equipment. s Overall Jacket 4BD BD BD BD BD BD BD BD BD BD BD BD BD BD BD BD BD AWG and larger are not UL Listed or CSA Certified. Also available in 300 V SJEOOW. Diameters and weights may vary among manufacturers. Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.13

15 Welding Cable./;Welding Cable/11712 Index1.W&C Index1.W&C Energy Energy Products//Portable Products//Flexible<=125c//Welding Cord//Other Welding Cable Thermoset insulation Thermoset jacket 90 C PR21424V eps Welding Machine Rating Lengths Up to 45 ft. Lengths Up to 100 ft. Lengths Up to 250 ft. AWG AWG AWG 75 Amperes Amperes Amperes 1 1 2/0 300 Amperes 1/0 2/0 4/0 400 Amperes 2/0 3/ Amperes 3/0 4/ Note: Lengths are from power supply to electrode holder (one way). Ampacity values are not NEC values. 1. CONDUCTOR: Class K (30 AWG*) rope-stranded copper per ASTM B-172, a separator is applied over the conductor 2. OVERALL JACKET: Thermoset meeting the requirements of ICEA S (NEMA WC58) 3. TEMPERATURE: 105 C D For use as flexible lead from welding machine to electrode holder. These cables are designed for use only with the secondary voltages typical of welding equipment. Can not be used as motor lead. Size AWG/kcmil 5J J J J J J /0 1, J /0 1, J /0 1, J /0 2, J , J , ,290 5J , ,800 *34 AWG stranding also available. UL available on request. Diameters and weights may vary among manufacturers. Additional colors available from stock (e.g. red). Stranding varies by manufacturer Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

16 Jumper Cable 5-15 kv, Nonshielded./;5/15 kv Jumper Cable, Nonshielded/371 Index1.W&C Index1.W&C Energy Energy Products//Power Products//Portable Unarmored//Other Cord//Other Jumper Cable 5-15 kv, Nonshielded PR1159V eps EPR insulation/jacket 1. CONDUCTOR: Extra flexible, rope-stranded copper with a semi-conducting tape applied over the conductor 2. INSULATION: Red Ethylene Propylene Rubber (EPR) per ICEA S (NEMA WC71) 3. AMPACITY: Based on insulated single conductor isolated in air with a conductor temperature of 90 C and an ambient temperature of 40 C per 2008 NEC Table TEMPERATURE: 90 C 5. VOLTAGE: 5-15 kv Temporary jumper cables are intended for use as flexible power leads to by-pass portions of aerial power lines. They are also used in equipment where a nonshielded flexible cable is required. Diameter (in.) 5R R R / R / R / R , R , , Diameters and weights may vary among manufacturers. Note: Jumper cables should not be used in place of shielded medium-voltage cables. They should be used only in areas where contact with people and electrical grounds is limited. Access to these cables must be limited to authorized personnel. Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.15

17 Crane and Festoon Cable./;Crane and Festoon Cable/12120 Index1.W&C Energy Products//Flexible<=125c//Pndt/Fstn/Reel/Robtc Cordaflex (SM) EPR insulation Braid-reinforced Yellow neoprene jacket 90 C, 600 V 1. CONDUCTOR: Extra finely stranded tin-coated copper 2. INSULATION: Ethylene Propylene Rubber (EPR) 3. FEATURE: Heavy-duty Kevlar messengers in shaped EPDM filler pads 4. INNER JACKET: Neoprene with high-tenacity textile braid in vulcanized bond 5. OVERALL JACKET: Yellow neoprene 6. STANDARDS: Accepted by MSHA, UL and VDE 7. TEMPERATURE: 90 C 8. VOLTAGE: 600 V D PR1071V eps Cordaflex (SM) magnet crane cables provide a superior mechanical resistance to corkscrewing. Conventional two-conductor arrangement for ease of splicing and termination. For use in magnet crane reels, all DC two conductor tenders, festoons, reels, power tracks and DC grapple reels. s Max. Reeling Tension (lb.) 4EC EC EC EC , Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

18 Crane and Festoon Cable ;Crane and Festoon Cable/12127 Index1.W&C Energy Products//Flexible<=125c//Pndt/Fstn/Reel/Robtc Cordaflex (SM) PR1071V eps EPR insulation Braid-reinforced Dual yellow neoprene jacket 90 C, 600 V 1. CONDUCTOR: Extra flexible tinned copper 2. INSULATION: Ozone-resistant Ethylene Propylene Rubber (EPR) 3. COLOR CODE: ICEA S (NEMA WC57) Method 4 4. FEATURE: High-tenacity Kevlar central strength member with a layer of EPDM insulation 5. OVERALL JACKET: Double neoprene, yellow jacket with a reinforcing textile braid in between the jacket layers 6. STANDARDS: Accepted by MSHA, UL and VDE 7. TEMPERATURE: -45 C to 90 C 8. VOLTAGE: 600 V Suited for high-speed, high-tension applications where high-duty cycles are encountered. This design is ideally suited for vertical reeling applications, tender systems and sheave guide applications. Cordaflex's (SM) construction is very resistant to the high torsion and transverse forces encountered in force-guided operations. s Max. Reeling Tension (lb.) 4EC EC EC EC EC EC , EC EC EC EC EC EC , EC , EC , EC EC EC EC EC , EC , EC , EC , EC , EC , Other sizes available. Call your local sales representative. Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.17

19 Crane and Festoon Cable ;Crane and Festoon Cable/12122 Index1.W&C Energy Products//Flexible<=125c//Pndt/Fstn/Reel/Robtc PR1073V eps PVC insulation Kevlar messenger Polyurethane jacket 75 C, 600 V 1. CONDUCTOR: Extra flexible stranded copper 2. INSULATION: Polyvinyl chloride (PVC) 3. COLOR CODE: Method 4 per ICEA S (NEMA WC57) 4. ASSEMBLY: Overall textile taped reinforcement and cotton braid covered lead bead cords, Kevlar braided reinforcement messenger 5. OVERALL JACKET: Polyurethane 6. TEMPERATURE: -55 C to 75 C 7. VOLTAGE: 600 V Designed specifically for use in container crane spreader baskets. The self-coiling and uncoiling operation and vertical suspension cause combined torsional/tensional forces unlike those occurring in other applications. This cable allows for adverse factors such as high winds, and increasing hoist and travel speeds on new generation cranes. ;Crane and Festoon Cable/12124 Index1.W&C Energy Products//Flexible<=125c//Pndt/Fstn/Reel/Robtc Spreaderflex s 4ES ,310 4ES ,725 4ES ,995 4ES ,655 D 4ES ,375 Other sizes available. Call your local sales representative. Type W Round CV Cured PR1074V eps EPR insulation TS CPE jacket 90 C, 600/2,000 V 1. CONDUCTOR: Rope-stranded copper 2. INSULATION: Ethylene Propylene Rubber (EPR) 3. ASSEMBLY: Two conductors cabled with fillers, over-wrapped with reinforced binder, separator where applicable 4. OVERALL JACKET: CV cured two pass, braid-reinforced TS CPE 5. STANDARDS: Meets the requirements of ICEA S , accepted by MSHA and marked with the manufacturer's P number 6. TEMPERATURE: 90 C 7. VOLTAGE: 600/2,000 V For use with magnet cranes and other mobile or portable electrical equipment. Can be used on equipment with reeling devices. Overall Jacket 5D-0802C D-0602C D-0402C D-0202C ,150 Lead cured available upon request. Diameters and weights may vary among manufacturers Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

20 Crane and Festoon Cable ;Crane and Festoon Cable/12126 Index1.W&C Energy Products//Flexible<=125c//Pndt/Fstn/Reel/Robtc Cordaflex (K) PR13569V eps EPR insulation Braid-reinforced Dual neoprene jacket 90 C, 600 V 1. CONDUCTOR: Extra flexible tinned copper 2. INSULATION: Ozone-resistant Ethylene Propylene Rubber (EPR) 3. COLOR CODE: ICEA S (NEMA WC57) Method 4 4. OVERALL JACKET: Heavy-duty double-extruded black neoprene with a high-tenacity textile braid reinforcement 5. STANDARDS: Accepted by MSHA, UL and VDE 6. TEMPERATURE: -55 C to 90 C 7. VOLTAGE: 600 V Ideal for cable-handling systems such as cable reels, festoon systems or power tracks for which extended flex life is a major consideration. Cordaflex (K)'s extremely flexible conductor assembly and jacket material ensure superior cable flexlife for applications characterized by tensions and repeated bending. s Max. Reeling Tension (lb.) 4EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC , EC , EC EC EC EC EC EC , EC , EC , EC , EC , Other sizes available. Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.19

21 Crane and Festoon Cable ;Crane and Festoon Cable/12129 Index1.W&C Energy Products//Flexible<=125c//Pndt/Fstn/Reel/Robtc Planoflex Flat construction EPR insulation Neoprene jacket 90 C, 600 V 1. CONDUCTOR: Extra flexible bare stranded copper 2. INSULATION: Ethylene Propylene Rubber (EPR) 3. COLOR CODE: ICEA S (NEMA WC57) Method 4 4. OVERALL JACKET: Neoprene 5. STANDARDS: VDE and UL 6. TEMPERATURE: -55 C to 90 C 7. VOLTAGE: 600 V PR1076V eps Planoflex is suitable for crane festoon systems, and other materials handling equipment, both indoor and outdoor, over a wide temperature range. s 4EF-1604-NEO x EF-1608-NEO x EF-1612-NEO x EF-1624-NEO x EF-1404-NEO x EF-1408-NEO D x EF-1412-NEO x EF-1424-NEO x ,162 4EF-1204-NEO x EF-1207-NEO x EF-1212-NEO x EF-1004-NEO x EF-1007-NEO x EF-0804-NEO x EF-0604-NEO x EF-0404-NEO x ,061 4EF-0204-NEO x ,444 Shielded pairs or conductors available upon request Request the latest literature and guides from Anixter ANIXTER anixter.com/literature

22 Crane and Festoon Cable ;Crane and Festoon Cable/17093 Index1.W&C Energy Products//Flexible<=125c//Pndt/Fstn/Reel/Robtc Flat Festoon PVC Flat construction PVC insulation PVC jacket 90 C, 600 V 1. CONDUCTOR: Extra flexible bare stranded copper 2. INSULATION: PVC 3. COLOR CODE: ICEA S (NEMA WC57) Method 4 4. OVERALL JACKET: PVC 5. STANDARDS: UL 6. TEMPERATURE: -40 C to 105 C 7. VOLTAGE: 600 V Festoon systems in power and control applications. PR1076V eps FLAT FESTOON PVC Unshielded s 4EF-0204-PVC x ,278 4EF-0404-PVC x EF-0604-PVC x EF-0804-PVC x EF-1004-PVC x EF-1204-PVC x EF-1208-PVC x EF-1404-PVC x EF-1408-PVC x EF-1412-PVC x EF-1608-PVC x EF-1612-PVC x FLAT FESTOON PVC Shielded yellow s 4EF-1608S-PVC EF-1612S-PVC EF-1412S-PVC Products. Technology. Services. Delivered Globally ANIXTER anixter.com 10.21

23 The Right Choice for Critical Applications Why Thermoset Jackets on Wire and Cable? Even though there are many insulating and jacketing materials available today in the design and manufacture of wire and cable, thermoset materials have consistently outperformed their thermoplastic counterparts. The biggest difference between thermoplastic and thermoset (or cross-linked) materials is how the materials react to heat. Where thermoplastic materials have the ability to be molded, melted and remolded again, thermoset materials such as rubber are set (cured or vulcanized) during the extrusion process. Once a thermoset material has been cured, it cannot be remolded, which provides a more durable jacket that will not melt when exposed to high-load or short-circuit conditions. Conversely, thermoplastic materials will deform under high heat, which will result in the degradation of the jacket s physical properties. This is why performance-conscious users specify thermoset jackets in applications where reliability is an absolute necessity. The table below provides an overview of the features and application benefits of thermoset and thermoplastic material and details why thermoset jackets continue to be the preferred insulating and jacketing material for critical applications. Thermoset Materials Features and Benefits Product Feature Superior tensile strength Outstanding elongation properties Less degradation over time Excellent thermal stability More stringent oil resistance testing Increased flame resistance Application Benefit Provides extra resistance against damage during difficult installations Allows for more robust installation Provides a more flexible jacket, which makes it easier to bend and train during installation Extends service life, even in the harshest of applications Does not melt under high heat and pressure, reducing faults caused by compound flow Delivers consistent performance at a wider temperature range Offers superior performance and longer cable service life in installations where high degrees of oil and chemicals are present Exhibits greater oil resistance characteristics at a wider temperature range Burns to an ash when exposed to flame Does not exhibit thermoplastic drip, which can spread flame to other components under fire conditions As you see in the features and benefits table, thermoset jackets outperform thermoplastic jackets in every category and outclass thermoplastics entirely in terms of overall physical robustness, thermal stability, oil resistance and flame resistance. These are some of the reasons that thermoset jackets remain to be the material of choice for critical applications. Also read Anixter s TECHBrief: Anixter Leads the Seamless Transition from Hypalon Contact your local Anixter representative or call ANIXTER for more information. Products. Technology. Services. Delivered Globally.