VISIT US ON OUR
|
|
- Ralf Spencer
- 5 years ago
- Views:
Transcription
1 P/N VISIT US ON OUR SIZE: '' in ID SIZE: mm ID Updated August 2011 The propellant tank is a spherical pressure vessel constructed from two (2) machined 6AL-4V titanium hemispheres girth welded at the equator. Mounting is accomplished by a base mount welded to the outlet hemisphere. Gas free propellant is provided by an all-metal propellant management device (PMD). A.250 inch O.D by.020 inch wall 304L CRES transition tube is butt welded to the tube extension for the pressurant inlet connection adn to a 3AL-2.5V formed titanium tube for the propellant outlet. Specification Requirements Imperial Units Ref. Temp. Metric Units Ref. Temp Operating Pressure psid F bar 55.0 C Proof Pressure psid F bar 55.0 C Proof Cycle N/A psig N/A F N/A bar N/A C Reference / Note MEOP Cycle N/A psig N/A F N/A bar N/A C Design Burst Pressure psid F bar 55.0 C No Burst Test Total Tank Volume 1, in 3 N/A F liters N/A C Required Propellant Volume lb N/A F liters N/A C 91-97% fill fraction Maximum Mass 5.90 lb 2.68 kg Propellant Tube Diameter inch 6.35 mm Pressurant Tube Diameter inch 6.35 mm Frequency - lateral > 100 Hz Frequency - axial > 100 Hz Sine Vibration Levels Loaded Tank Qualification/Protoflight (Propellant) Test Axis Frequency (Hz) Acceleration* (g, 0-peak) Lateral (X or 5 to in. S.A Y) 17.7 to Protoflight 5.0 to in. S.A Axial (Z) 22.4 to * Increase acceleration levels for test performed with water Loaded Tank-Acceptance (Propellant) Test Axis Frequency (Hz) Acceleration* (g, 0-peak) Lateral (X or 5 to in. S.A Y) 17.7 to Acceptance 5.0 to in. S.A Axial (Z) 22.4 to * Increase acceleration levels for test performed with water Limit Acceleration* (g) Limit Acceleration* (g) Unloaded Tank-Qualification/Protoflight (For Shipping & Handling) Test Axis All (X,Y,Z) Frequency (Hz) 5.0 to 10.8 Acceleration (g, 0-peak) 0.25 in. S.A Qualification 10.8 to to to Sweep Rate: 2 octaves/min Qualification 4 octaves/min Protoflight and Acceptance Note: Tank is loaded with 29.6 kg of distilled water for wet sine vibration testing.
2 Frequency (Hz) to to to Overall (g rms ) Loaded Tank: Random Vibration Level (Propellant*) Protoflight and Qualification Acceptance (Reference only -- test not required) g 2 /Hz +6 db/oct 0.16g 2 /Hz -6 db/oct g rms 14.1 g rms g 2 /Hz +6 db/oct 0.08g 2 /Hz -6db/oct g rms 10.0 g rms * Increase random vibration levels for test performed with water. Tank is loaded with 29.6 kg (97% tank volume) water. Duration: 3.0 Minutes/Axis, Qualification 1.0 Minute/Axis, Acceptance and Protoflight
3 Interface
4
5
6 ACCEPTANCE TESTS Reference Document Actual Test Data: Serial No Examination of Product Pass Pass/fail Weight Determination 5.9 lb maximum lb actual Pre-Proof Volume Determination 1892 in 3, record required in 3, record actual Proof Pressure Test 375 psig, record required psig, record actual Post-Proof Volume Determination 1892 in 3, record required in 3, record actual Expulsion Efficiency 99.9 %, record required %, record actual PMD Bubble Point Test Proprietary Record required ProprietaryRecord actual External Leakage Test 1.0 x 10-6 std/cc He max x10-8 scc/sec Record actual Penetrant Inspection Pass Pass/fail Radiographic Inspection Pass Pass/fail Final Examination of Product Pass Pass/fail Cleanliness Verfication Record required Pass Record actual Protoflight Test Reference Document Actual Test Data: Serial No. 0001Q Examination of Product Pass Pass/fail Weight Determination 5.9 lb maximum lb actual Pre-Proof Volume Determination 1892 in 3, record required in 3, record actual Proof Pressure Test 375 psig, record required psig, record actual Post-Proof Volume Determination 1892 in 3, record required in 3, record actual Proof Cycle N/A psig, record required N/A N/A psig, record actual MEOP Cycle N/A psig, record required N/A N/A psig, record actual Vibration Test, Random Expulsion Efficiency 99 %, record required See below for details* %, record actual PMD Bubble Point Test Proprietary Record required ProprietaryRecord actual External Leakage Test 1 x 10-6 std/cc He max, x 10-8 std/cc He, record actual Penetrant Inspection Pass Pass/fail Radiographic Inspection Pass Pass/fail Final Examination of Product Pass Pass/fail Cleanliness Verfication Record required Pass Record actual Burst Pressure Test N/A psig,record required N/A N/A psig,record actual Protoflight Dry Sine Vibration Levels Frequency Levels inch S.Ag g g Protoflight Sine (Wet) Vibration Acceleration Load Limits Axis Levels X or Y (Lateral) 8.0 g Z (Axial) g Protoflight Wet Sine Vibration Test Random Vibration Test Lateral (X or Y) Frequency (Hz) Levels Frequency (Hz) Levels g 2 /Hz inch dB/Octave Axial (Z) 8.0 S.Ag g 2 /Hz -6dB/Octave Frequency (Hz) Levels g 2 /Hz inch S.A Overall grms g Tank is loaded with 29.6 kg of distilled water and pressurized to Sweep Rate is 4 octaves per minute 250 psig. Tank is loaded with 29.6 kg of distlled water at testing.
7
8
9
10
11
Space Propulsion 2018 BARCELO RENACIMIENTO HOTEL, SEVILLE, SPAIN / MAY 2018
Space Propulsion 2018 BARCELO RENACIMIENTO HOTEL, SEVILLE, SPAIN / 14 18 MAY 2018 Design and Qualification of Fuel and Oxidizer Tank Assemblies for the James Webb Space Telescope Walter Tam (1) and Don
More information¼ HIGH PRESSURE LATCH VALVE
¼ HIGH PRESSURE LATCH VALVE VE0537-0 DESCRIPTION VACCO Industries maintains a product line of latching valves designed to meet industry s demand for high reliability, tight leakage, and quick response
More informationALL-METAL inch. Heritage/History/Usage
ALL-METAL 7.66-inch 80326-1 1984 7.66 polar bosses 80499-1 2007 7.66 polar bosses 3.38 235 3600,5400,7200 VRM STA 2 3.38 228 3600,5400,7200 PRISMA STA A.250 inch O.D. by.035 inch wall 304L CRES transition
More information1 N / 0.25 lb Mono-Propellant Thruster Valve Module V0D
1 N / 0.25 lb Mono-Propellant Thruster Valve Module V0D10898-01 DESCRIPTION VACCO Industries maintains a product line of solenoid thruster valves designed to meet industry s demand for high reliability,
More informationTitre / Title HIGH RELIABILITY RF COAXIAL LOADS AND ATTENUATORS GENERIC SPECIFICATION
Date: December 19 th, 16 ISSUE: 1/B PAGE: 1 / 21 Titre / Title HIGH RELIABILITY RF COAXIAL LOADS AND ATTENUATORS GENERIC SPECIFICATION Rédigé par / Written by Responsabilité / Responsibility Date Signature
More informationM3500 Industrial Pressure Transmitter
M3500 Industrial Pressure Transmitter The M3500 is a high accuracy industrial pressure transmitter featuring HART communications and a cast aluminum enclosure for indoor or outdoor use. Typical output
More information2 LBF COLD GAS THRUSTER
2 LBF COLD GAS THRUSTER 48003040 DESCRIPTION The VACCO Cold Gas Thruster is a flight qualified design featuring an electrically operated, fastresponse solenoid valve. These rugged CRES units are designed
More informationCHAPTER 6 ENVIRONMENTAL CONDITIONS
ENVIRONMENTAL CONDITIONS 6.1 Summary This chapter introduces the natural environment of launch site, thermal environment during SC operation, thermal and mechanical environments (vibration, shock & noise)
More informationLOW-COST TANKAGE PROVIDED FOR RECENT DISCOVERY MISSIONS
Page 1 LOW-COST TANKAGE PROVIDED FOR RECENT DISCOVERY MISSIONS Walter H. Tam, Michael J. Debreceni, Charles D. Nye, and Michael S. Hersh Pressure Systems, Inc. ABSTRACT Several recent and up-coming planetary
More informationLOW SHOCK RELEASE UNIT EASY RESETTABLE AND 100 % REUSABLE. Jens Müller 1, Christoph Zauner 2
LOW SHOCK RELEASE UNIT EAS RESETTABLE AND 100 % REUSABLE Jens Müller 1, Christoph Zauner 2 1 Astrium GmbH, 2 Chair of Lightweight Structures - Technical University of Munich Astrium GmbH, 81663 München
More informationARIANEGROUP ORBITAL PROPULSION ROBERT-KOCH-STRASSE TAUFKIRCHEN GERMANY
www.ariane.group ARIANEGROUP ORBITAL PROPULSION ROBERT-KOCH-STRASSE 1 82024 TAUFKIRCHEN GERMANY SUSANA CORTÉS BORGMEYER SUSANA.CORTES-BORGMEYER@ARIANE.GROUP PHONE: +49 (0)89 6000 29244 WWW.SPACE-PROPULSION.COM
More informationQSFP Copper Module Direct Attach Cable Assembly &Cage
Qualification Test Report 501-60067 12Mar. 2012 Rev. 1 QSFP Copper Module Direct Attach Cable Assembly& Qualification Test Report QSFP Copper Module Direct Attach Cable Assembly & Tyco Electronics. (Shanghai)
More informationSpecification of Battery Charger
1 S O N E I L 6033 Shawson Dr., Unit 29, Mississauga, Ontario, Canada L5T 1H8 Ph.: (905) 565-0360 Fax: (905) 565-0352 http://www.soneil.com Revision No.: R01 Specification of Battery Charger MODEL: 6010SR
More informationReliability & Qualification Report for MEMS Based Variable Optical Attenuators
Reliability & Qualification Report for MEMS Based Variable Optical Attenuators P/N: MMVOA-1-1550-S-9/125-XX-0.25-1 Page 1 of 21 Revision History Rev Approval Date ECM/ECR Description of Change 00 10/18/2008
More informationQUALIFICATION TEST SUMMARY REPORT ESR Qualification Type Testing of Amphenol Corporation s 2M801 Series Connector
Page 1 of 13 QUALIFICATION TEST SUMMARY REPORT ESR-9389 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation
More informationVACCO ChEMS. Micro Propulsion Systems
VACCO ChEMS Micro Propulsion Systems 14 Flight Systems and Counting 1 Heritage MEPSI Micro Propulsion System Micro Propulsion System 1U CubeSat Provided to AFRL for the Aerospace Corporation MEMS Pico-Satellite
More informationUN Test Report. - ASM P/N SB10F46442(Nom.36Wh, 7.4V)-
문서번호 Prepared Reviewed Approved QAE-EF02-140325-PKASM P/N SB10F46442 남익현장승현남대호박해나김병수 UN Test Report - ASM P/N SB10F46442(Nom.36Wh, 7.4V)- 목차 1. UN Transportation Regulation Test 2. Test Procedure 3. Test
More informationBlower Specifications
Lab These charts are arranged by increasing CFM. All lab blowers are 0Hz. See the preceding Four Steps To Blower Selection. 0 to CFM to / inch Static Pressure SIZE CODES -000/00 / () 0-00 / /0-0 () 0-000
More information3M CP2 Press-Fit Headers and Sockets, 2 mm
1 of 7 3M CP2 Press-Fit Headers and Sockets, 2 mm A-Style CP2 Connectors CP2-SA110-G1-KR Right Angle Socket Connectors mated to CP2-HA110-GA1-KR Header Connectors 78-5102-0083-1 Revised Date: February
More informationUN Test Report. - ASM P/N 45N1726, ASM P/N 45N1730 (Nom.33Wh, 3.7V)-
문서번호 Prepared Reviewed Approved QAE-EF02-140703-PKASM PN45N1726, ASM PN45N1730 남익현장승현남대호박해나김병수 UN Test Report - ASM P/N 45N1726, ASM P/N 45N1730 (Nom.33Wh, 3.7V)- 목차 1. UN Transportation Regulation Test
More informationMIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)
This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please
More informationProduct Specification
AFI Jack, Straight Orientation, Mixed Technology AFI Plug, Straight Orientation, Cable Terminated Other configurations available for: Vertical cable-to-board applications Floating Adaptor, Surface mount,
More informationFAN POWERED SERIES FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT SPECIFIABLE FEATURES
FAN TERMINAL UNIT SPECIFIABLE FEATURES Galvanized steel casing, mechanically sealed for low leakage construction NEMA TYPE 1 rated hinged control enclosure with standoff to prevent penetration of casing
More informationFor more information about Agilent Technologies services please visit our web site using the following URL
Agilent Preventive Maintenance provides factory recommended service for your analytical systems to assure reliable operation and the accuracy of your results. Delivered by highly-trained and certified
More information700 Series Thermal Switch High Reliability
700 Series Thermal Switch High Reliability Qualified to NASA-Goddard Specifications: S-311-641, "Switches, Thermostatic, General Requirements" and S-311-641/03 "Switch, Thermostatic, Corrosion Resistant
More informationEnvironmental Qualification
Environmental Qualification Actuation Solutions for Nuclear Powerplants Environmental Qualification of Rotork nuclear electric actuators and gearboxes Redefining Flow Control Contents Section 1 Environmental
More informationUN38.3 Test Report -SB10J78996(Nom. 24Wh, 7.5V)-
문서번호 Prepared Reviewed Approved QAE-EF02-150828-PKSB10J78996 남익현장승현남대호박해나김병수 UN38.3 Test Report -SB10J78996(Nom. 24Wh, 7.5V)- 1. UN Transportation Regulation Test 2. Test Procedure 3. Test 4. Sample Image
More informationHIGH LOAD LOW SHOCK RELEASE UNIT (30 kn)
HIGH LOAD LOW SHOCK RELEASE UNIT (30 kn) Jens Müller (1), Christian Anderau (2) (1) Astrium GmbH, 81663 München (Germany), Email: Jens.mueller@astrium.eads.net (2) RUAG Aerospace AG, Widenholzstr. 1, 8304
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationSporlan Gas Cooler/ Flash Gas Bypass Valves
Sporlan Gas Cooler/ Flash Gas Bypass Valves For Transcritical CO 2 (R-744) Applications August 14 / Bulletin 100-80 Page 2 Bulletin 100-80 Bulletin 100-80 Page 3 GAS COOLER/FLASH GAS BYPASS VALVES The
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationLINEA Low Discharge Roof Exhausters
LINEA Low Discharge Roof Exhausters TECHNICAL SPECIFICATIONS BULLETIN LF18 PennBarry Your Single Source for Commercial & Industrial Supply & Exhaust Fans www.pennbarry.com TABLE OF CONTENTS INTRODUCTION
More informationUN38.3 Test Report -SB10K12721(Nom. 44Wh, 11.4V)-
문서번호 Prepared Reviewed Approved QAE-EF02-150915-PKSB10K12721 남익현장승현남대호박해나김병수 UN38.3 Test Report -SB10K12721(Nom. 44Wh, 11.4V)- 목차 1. UN38.3 Transportation Regulation Test 2. Test Procedure 3. Test 4. Sample
More informationLCMass Series Mass Flow Sensor
LCMass 100-140 Series Mass Flow Sensor Technical Data Sheet HIGH ACCURACY The LCMass 100 achieves a ±0.15% accuracy on liquids. COMPACT ECONOMIC DESIGN Straight twin-tube design allows for an overall smaller
More informationNational Board Update
National Board Update Presentation to the Valve Repair Council June 2, 2016 Prepared by: Joseph F. Ball, P.E. National Board Update National Board activities Who we are and what we do National Board Inspection
More informationValidation Test Report
1499 Poinsettia Ave., Suite 160 Vista, CA 92081 Validation Test Report High Pressure High Temperature (HPHT) Brushless DC (BLDC) Motor DII15-60-201A Rev Date Author Reviewed App. by Comments by A 2/1/17
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bldg 3, Rm RM6 Contact: Gareth Williams Environmental Test Centre Tel: +44 (0)1702 383589 MoD Shoeburyness Fax: +44 (0)1702 383037 Southend-on-Sea
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationUN Test Report. - L13L1P21(17.5Wh, 3.7V)-
문서번호 Prepared Reviewed Approved QAE-EF02-130726-PKL13L1P21 김홍일남익현장승현남대호이재승정준용 UN Test Report - L13L1P21(17.5Wh, 3.7V)- 목차 1. UN Transportation Regulation Test 2. Test Procedure 3. Test 4. Sample Image
More information9.41-inch DIAMETER DIAPHRAGM TANK
9.41-inch DIAMETER DIAPHRAGM TANK 80156-1 1970 9.41, polar bosses 80222-1 1974 9.41, polar bosses 80252-1 1976 9.41, polar bosses 80258-1 1977 9.41, polar bosses 80278-1 1979. 1987 9.41, polar bosses 6
More informationSpecification of Battery Charger
Revision No.: 02 Specification of Battery Charger MODEL: 2460SR-1 24V / 30A IP-54 LEAD ACID BATTERY CHARGER Page 1 of 11 Contents 1. General--------------------------------------------------------------------------3
More informationProduct Specification
1.0 SCOPE This document contains specific electrical, mechanical, and environmental requirements and specifications for double- sealed, axial- leaded hybrid capacitors. 2.0 CONSTRUCTION 2.1 General The
More informationCONCEPTUAL DESIGN OF SPACE EFFICIENT TANKS
CONCEPTUAL DESIGN OF SPACE EFFICIENT TANKS Walter H. Tam and Ian Ballinger ATK Space Systems, Inc. and Don E. Jaekle, Jr. PMD Technology ABSTRACT For spacecraft propellant tank applications, an all-metal
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationPRODUCT SPECIFICATION
ML-XT COMMERCIAL VEHICLE CONNECTOR SERIES 1.0 SCOPE This Product Specification relates to the ML-XT Commercial Vehicle, (CV), Power and/or Signal wire-to-wire connector system. This system consists of
More informationPneumatic fluid power Push-in connectors for thermoplastic tubes
ISO 2015 All rights reserved ISO/TC 131/SC 4 N Date: 2015-08-14 ISO/CD 14743 ISO/TC 131/SC 4/WG Secretariat: ANSI Pneumatic fluid power Push-in connectors for thermoplastic tubes Transmissions pneumatiques
More informationInstallation, Operating and Maintenance Manual
DOCUMENT # BASTD1007 Installation, Operating and Maintenance Manual 1. Technical Note - Hopper Hammer Initial Settings Pages 7 and 8 of the Hopper Hammer Models PASTD583-2 & PASTD978 Installation, Operating
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationBRAIDED HOSE WT/1/ HOSE OD (MAX)
TITEFLEX RA170 (220 SERIES) SERI ES: 220 SPECIFICATION: SAE AS1975, Class 3000 BRAID: Kevlar INNERCORE: PTFE Smoothbore QUALIFICATIONS : SAE AS1975, Class 3000 TSO-C75 Type II-S/P TSO-C75 Type IIB-S/P
More informationSPECIFICATION AND PERFORMANCE TABLE OF CONTENT. 1. Scope Reference Documents Material and Components... 2
TABLE OF CONTENT 1. Scope... 2 2. Reference Documents.. 2 3. Material and Components...... 2 4. Design and Construction..... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements
More informationSINGLE DUCT AIR TERMINAL UNITS
AIR terminal units AIR TERMINAL UNITS MODEL NUMBER LEGEND XXXXX XXX -XXXX Model TH TL THECO Inlet Size (04, 05, 06, etc.) Generation 5, 6, 7 The METALAIRE single duct terminal units are at the core of
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More informationMiniature Proportional Valve Thermally Compensated Proportional Valve. Physical Properties
VSO Miniature Proportional Valve Thermally Compensated Proportional Valve Typical Applications Gas Chromatography Mass Spectrometry Ventilators O 2 Concentrators/Conservers Anaesthesia Delivery & Monitors
More informationTEST METHODS CONCERNING TRANSPORT EQUIPMENT
PART IV TEST METHODS CONCERNING TRANSPORT EQUIPMENT - 403 - CONTENTS OF PART IV Section Page 40. INTRODUCTION TO PART IV... 407 40.1 PURPOSE... 407 40.2 SCOPE... 407 41. DYNAMIC LONGITUDINAL IMPACT TEST
More informationOPTIONAL SERVICE BULLETIN OSB
DAI OSB 42-131 Page 1 of 4 OPTIONAL SERVICE BULLETIN OSB 42-131 I TECHNICAL DETAILS I.1 Category Optional. I.2 Airplanes affected Type: DA 42, DA 42 M Serial numbers: 42.004 through 42.427 42.AC001 through
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationFULL PORT STANDARD PORT COMPLETE SIZE RANGE. Superior Flow Easy Operation Full Traceability State-of-the-Art Manufacturing
FULL PORT STANDARD PORT COMPLETE SIZE RANGE Superior Flow Easy Operation Full Traceability State-of-the-Art Manufacturing An Employee-Owned Total Quality Management Company Made in America The Polyball
More informationFSV Mast A450 Kit. Table of Contents
FSV Mast A450 Kit Table of Contents Model Page 7FGU/DU20-25 3 7FGU/DU20-25 w/ss 7 7FGU/DU30-32 11 7FGU/DU30-32 w/ss 15 7FGCU15-SU20 w/ss 7FBCU15-18 w/ss 7FGCU20-25 7FBCU20-25 7FBCHU25 7FGCU20-25 w/ss 7FBCU20-25
More informationJun 20,2014 Rev A
Product Specification 108-115067 Jun 20,2014 Rev A DDR4 DIMM Through-hole Memory Socket 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity
More informationPrepared by. :n:?f"o:tj.,t[:i,.. ) R. Foster. Appl'uved by k., ~ M. Kat~ Group EngithC.l Structur.:o.l/Thern' 1 Dcsi~ n
.. :Xhis ~~port it;anadd~l}dqm to the Al$EP Boydbolt Fas(ene.r Design V~r~fi~ation 'fest Progr
More informationNATIONAL TECHNICAL SYSTEMS
Test Report Number 41418-09.PPC Testing of Pancake Alternator & PMU PREPARED FOR: The Perfect Parts Company Sullivan Products 1 North Haven Street Baltimore, MD 21224 PREPARED BY: National Technical Systems
More informationFusegear for Semiconductor Fuse
Fusegear for Semiconductor Fuse IP 20.SI Bases for PSC ranges: SI TT, SI 000/00, SI DIN SI TT for stud-type fuses SI 00 for bracket-type fuses STANDARD VERSION SI FUSEHOLDERS FOR STUD-TYPE FUSES, FOR BLADE-TYPE
More informationUN Test Report - ASM P/N SB10H45077(Nom.91Wh, 11.4V)-
문서번호 Prepared Reviewed Approved QAE-EF02-150305-PKASM PN SB10H45077 남익현장승현남대호정규채김병수 UN Test Report - ASM P/N SB10H45077(Nom.91Wh, 11.4V)- 목차 1. UN Transportation Regulation Test 2. Test Procedure 3. Test
More informationMacro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
More informationEnvironmental Qualification Test Report for Spider S3/S5
32-0048 Environmental Qualification Test Report for Spider S3/S5 Tested for: Spider Tracks Limited FDS Job Nº: 21324 Flight Data Systems Pty. Ltd. ABN: 25 060 690 753 31 McGregors Drive, Keilor Park, Victoria
More informationFloat valve Type HFI. Data sheet
Data sheet Float valve ype is a high pressure float valve with internal liquid measuring device. he float valve is designed for direct flange mounting or welding on to plate heat exchanger type condensers,
More informationVERIFICATIONS OF THE DIAPHRAGM TANK FOR HIGH TEST PEROXIDE
VERIFICATIONS OF THE DIAPHRAGM TANK FOR HIGH TEST PEROXIDE T.C. Kuo 1, C.K. Pai 1, H. J. Liu 1, and K. Y. Chen 2 1 National Space Organization, 2 National Chung-Shan Institute of Science and Technology
More informationOmni Series Motors. Applimotion Motors & Actuators TORQUE. Low-Profile Direct Drive Motors for the World s Machines and Robots PRODUCT DATA SHEET
TORQUE Motors & Actuators PRODUCT DATA SHEET Omni Series Motors Low-Profile Direct Drive Motors for the World s Machines and Robots The Omni Series enables OEMs to design high performance, reliable, small
More informationCase. Without Insulating With Insulatiing E Size Size (0.016)
The TWA series is an axial leaded wet electrolytic tantalum capacitor with a unique cathode system that promotes very high CV (Capacitance/Voltage) per cc in traditional MIL-PRF-39006 case sizes. The series
More informationSB LiMotive Automotive Battery Technology. Kiho Kim
SB LiMotive Automotive Battery Technology Kiho Kim Contents Introduction Li Ion Cell Technology Page 2 Introduction to SBLiMotive Page 3 SBL Product Portfolio Cell & Module Cooling System BMS Hardware
More informationSAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
More informationIntegral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
More information1/11 表單編號 QS-3Q B
Battery Pack Test Report UN38.3 Customer: Lenovo Pack Model: L15C4A02 Nominal voltage: 14.4V Nominal capacity: 32Wh Configuration: 4S1P Customer P/N: 5B10L04163 Celxpert P/N: 921300080 Cell Type: LG INR18650S3
More informationSafir-M digital. Features. LCD indicator and controls. Industries. Applications
Features Reference accuracy, % FS 0.1 0.15 0.25 0.5 (draft pressure) Turndown 1:25 Output 4 20 ma, 0 5 ma Linear (increasing or decreasing) Square root (differential pressure) Damping (optional), s 0.5
More informationUSA FALCON 1. Fax: (310) Telephone: (310) Fax: (310) Telephone: (310) Fax: (310)
1. IDENTIFICATION 1.1 Name FALCON 1 1.2 Classification Family : FALCON Series : FALCON 1 Version : FALCON 1 Category : SPACE LAUNCH VEHICLE Class : Small Launch Vehicle (SLV) Type : Expendable Launch Vehicle
More informationLi-Polymer Battery Technology Specification
Li-Polymer Battery Technology Specification Customer Part name Li-Polymer Battery Model No LIPO 103450 2000mAh 3.7V Serial No Produce No Approved by Drafted by WenFei Liang - 1 - Checked by Signed by Xiao
More informationEVERCLEAR* Mini-SAS Connector System
Product Specification 108-2234 11Mar11 Rev D EVERCLEAR* Mini-SAS Connector System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirem ents for the TE Connectivity (TE)
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationDMT PERFORMING UNDER PRESSURE DMT. Pressure Scanner Features. Applications. Description 1/7
Features User Accessible Memory for Test Configuration Management ±0.05% FS System Accuracy EU Throughput Rates of 500 Hz Auto-Negotiating 10/100 BaseT Ethernet with TCP & UDP Protocol Pressure Ranges
More information4.Test Requirements: No mass loss,no leakage,no venting,no disassembly,no rupture and no fire,and the voltage retention is not less than 90%.
: : : : : : 1.Test Item: Altitude simulation (T1) 2.Test Purpose: This test simulates air transport under low-pressure conditions. Test cells and batteries shall be stored at a pressure of 11.6kPa or less
More informationSOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationFUNDAMENTAL SAFETY OVERVIEW VOLUME 2: DESIGN AND SAFETY CHAPTER E: THE REACTOR COOLANT SYSTEM AND RELATED SYSTEMS
PAGE : 1 / 13 4. PRESSURISER 4.1. DESCRIPTION The pressuriser (PZR) is a pressurised vessel forming part of the reactor coolant pressure boundary (CPP) [RCPB]. It comprises a vertical cylindrical shell,
More informationDYNAMETERS SERIES DMTF ULTRASONIC FLOW METER
DYNAMETERS SERIES DMTF ULTRASONIC FLOW METER Advanced Clamp-on Transit-time Ultrasonic Flow meter for Accurate Flow Measurement Features: Cost effective and versatile High accuracy, better than ±1.0% read
More informationTable 2: Ratings Symbol Parameter Test Conditions Min. Typ. Max. Unit Source Document
FEATURES and BENEFITS Significant spaceflight heritage (TRL 9) Sealed Sub-Miniature Snap Action Meets MIL-PRF-8805 enclosure design symbol 3 Spaceflight qualified Gold Contacts Vibration resistant Compact
More informationTaking Hydraulic System Reliability To A Higher Level
Taking Hydraulic System Reliability To A Higher Level Hydraulic Filtration Product Line PureForce Product Line Provides Superior Protection With increased demands on today s hydraulic systems, maintaining
More informationPV Newsletter Monthly Publication from CoDesign Engineering Skills Academy
April 15, 2013 PV Newsletter Monthly Publication from CoDesign Engineering Skills Academy www.codesignengg.com This article has some reproductions from the PV Newsletter - Volume 1, Issue 10 contributed
More informationJun06 Rev D
Product Specification High Speed Serial Data 2 Connector 108-1965 27Jun06 Rev D 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics High
More informationBack Pressure Regulator
Instruction Sheet P/N 108652H Description The Nordson back pressure regulator is a spring-loaded, hand-operated fluid pressure regulator designed for use with general liquid coating materials. The regulator
More informationCANADA SENSORS TECHNOLOGY INC.
CANADA SENSORS TECHNOLOGY INC. Manufacturer of Advanced Technology Pressure & Level Transmitters LIQUID LEVEL TRANSMITTER PROCESS 10 HART Enabled Intrinsically Safe Model Submersible Pump Lift Station
More informationUsing the IMV s standard ECO system to improve shock capability. Optimising Vibration Test Systems for Battery Testing using ECO Technology
Using the IMV s standard ECO system to improve shock capability Optimising Vibration Test Systems for Battery Testing using ECO Technology Dr John Goodfellow IMV Europe Ltd Copyright IMV IMV CORPORATION
More informationRosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
More informationHigh pressure float valve, type HFI REFRIGERATION AND AIR CONDITIONING. Technical leaflet
High pressure float valve, type HFI REFRIGERAION AND AIR CONDIIONING echnical leaflet Contents Page Introduction........................................................................................3
More informationQualification of Lockheed Martin Micro Pulse Tube Cryocooler to TRL6
#29 42 1 Qualification of Lockheed Martin Micro Pulse Tube Cryocooler to TRL6 T. C. Nast, E. Roth, J. R. Olson, P. Champagne, D. Frank Lockheed Martin Space Technology and Research (STAR) Lab, Palo Alto,
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationAPS 420 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The APS 420 ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying
More informationTStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZES RATINGS
Applications Steam, Liquid, Gas and Oil Service Process Equipment Water and Waste Power Industry Pulp and Paper Chemical Industry Metals and Mining TStrainers Pressures to 3705 PSIG Temperatures to 800ºF
More informationDevelopment of a Dual Mode Vibration Isolator for a Laser Communication Terminal
Development of a Dual Mode D-Strut@ Vibration Isolator for a Laser Communication Terminal Dale T. Ruebsamen, James Boyd*, Joe Vecera. and Roger Nagel Abstract This paper provides a review of the development
More informationRe evaluation of Maximum Fuel Temperature
IAEA Technical Meeting on on Re evaluation of Maximum Operating Temperatures and Accident Conditions for High Temperature Reactor Fuel and Structural Materials, 10 12 July 2012, Vienna, Austria Re evaluation
More informationPRODUCT SPECIFICATION
PROUCT SPECIFICATION TABLE OF CONTENTS 1.0 SCOPE 2.0 PROUCT ESCRIPTION 3.0 APPLICABLE OCUMENTS AN SPECIFICATIONS 4.0 RATINGS 5.0 PERFORMANCE 5.1 ELECTRICAL PERFORMANCE 5.2 MECHANICAL PERFORMANCE 5.3 ENVIRONMENTAL
More information