Inlet & Exhaust Filters
|
|
|
- Elizabeth Howard
- 5 years ago
- Views:
Transcription
1 Sample Filters Pump Inlet & Exhaust Filters Balston Sample Filters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roduct Features Exhaust filters eliminate oil mist and smoke from vacuum pump exhaust Protect vacuum pumps and reduce costly maintenance Easy to install and maintain Prevent oil backstreaming Prevent oil accumulation in ductwork Small Scale Laboratory Pumps Specialized Electronics Manufacturing 125 High Volume for Process Packaging
2 Pump Inlet & Exhaust Filters Exhaust Filters for Hazardous/Corrosive Applications Eliminate 99.9% oil mist and smoke from vacuum pump exhaust Prevent oil accumulation in ductwork Recover expensive lubricating oils, pump Eliminate potential OSHA and EPA violations CV-0118 Balston Pump Exhaust Filters Balston Pump Exhaust Filters remove all visible oil mist and smoke from vacuum pump exhaust, even - Filter Selection Chart (for hazardous/corrosive applications) Max. Pump Filter Model Number Flow Rate (CFM) 3 (5 m 3 /h) CV H 9 (15 m 3 /h) CV H How To Select The Filter available for KF and NW connections
3 Pump Inlet & Exhaust Filters Exhaust Filters for Hazardous/Corrosive Applications Model CV H CV H Port Size 1/2 NPT 3/4 NPT Max. Flow Rate 3 CFM 9 CFM Materials of Construction Head Bowl 304 SS 304 SS Internals 304 SS 304 SS Seals None None Maximum Temperature 250 F (121 C) 250 F (121 C) Maximum Pressure 15 psig (1.0 barg) 15 psig (1.0 barg) Shipping Weight 0.5 lbs. (0.2 kg) 0.8 lbs. (0.4 kg) Dimensions 2.9 Dia. X 4.2 H 4.0 Dia. X 5.3 H (7cm X 11cm) (10cm X 13cm) Ordering Information For assistance, call toll-free at AM to 5PM Eastern Time Model CV H (1) CV H (1) Number of Filter Cartridges Required Replacement Filter Cartridges Box of 3 Box of 7 Box of 10 Number of Pressure Relief Retainers #20222 Optional Accessories: #11015 Back Pressure Gage, Stainless Steel, 0-15 psi (0-1.0 barg) Please refer to Pages Filter cartridge is permanently sealed into housing. The entire unit is disposable. able in these models
4 Pump Inlet & Exhaust Filters Exhaust Filters for Non-Hazardous/Non-Corrosive Applications Eliminate 99.9% oil mist and smoke from vacuum pump exhaust Prevent oil accumulation in ductwork Recover expensive lubricating oils, pump Eliminate potential OSHA and EPA violations Model Balston Pump Exhaust Filters Balston Pump Exhaust Filters remove all visible oil mist and smoke from vacuum pump exhaust, 3 /h). Model AR-009 How To Select The Filter tions. Model AR-0316 Filter Selection Chart (for non-hazardous/non-corrosive applications) Model AR-0780 Max. Pump Filter Model Number Flow Rate (CFM/m 3 /h) 3 (5) H, H 9 (15) AR H 15 (25) AR H 20 (34) AR H 43 (73) AR H 100 (170) AR H 200 (340) AR H 300 (510) AR H 450 (765) AR H 850 (1440) AR H Model AR
5 Pump Inlet & Exhaust Filters Exhaust Filters for Non-Hazardous/Non-Corrosive Applications Model Port Size Max. Flow Materials of Construction Max. Max. Shipping Dimensions Rate Head Bowl Internals Seals Temp. Press. Wt H 1/2 NPT 3 CFM Nylon Nylon None 250 F (121 C) 15 PSIG (1.0 barg).25 lbs (0.1 kg) 2 Dia. X 3.7 H H KF-16 3 CFM Nylon Nylon None 250 F (121 C) 15 PSIG (1.0 barg).25 lbs (0.1 kg) 2 Dia. X 3.7 H AR H 3/4 NPT 9CFM Aluminum Aluminum Alum./SS/Nylon Viton 300 F(149 C) 15 PSIG (1.0 barg) 1.0lbs(0.45kg) 3.95 Dia.X5.13 H AR H 3/4 NPT 15 CFM Aluminum Aluminum Alum./SS/Nylon Viton 300 F(149 C) 15 PSIG (1.0 barg) 1.25lbs (0.57kg) 3.95 Dia.X8.13 H AR H 1 NPT 20 CFM Steel Steel Anod. Alum. Buna/Neo 300 F (149 C) 15 PSIG (1.0 barg) 8 lbs (4 kg) 7.4 Dia. X 8.8 H AR H 11/2 NPT 43 CFM Steel Steel Anod. Alum. Buna/Neo 300 F (149 C) 15 PSIG (1.0 barg) 11 lbs (5 kg) 7.4 Dia. X 15 H AR H 3 NPT 100 CFM Steel Steel Anod. Alum. Buna/Neo 300 F (149 C) 15 PSIG (1.0 barg) 17 lbs (8 kg) 10 Dia. X 18 H AR H 3 NPT 200 CFM Steel Steel Anod. Alum. Buna/Neo 300 F (149 C) 15 PSIG (1.0 barg) 23 lbs (10 kg) 10 Dia. X 28 H AR H 4 Flg. (1) 300 CFM Steel Steel Anod. Alum. Buna/Neo 300 F (149 C) 15 PSIG (1.0 barg) 90 lbs (41 kg) 19 Dia. X 43 H (5) AR H 4 Flg. (1) 450 CFM Steel Steel Anod. Alum. Buna/Neo 300 F (149 C) 15 PSIG (1.0 barg) 100 lbs (45 kg) 19 Dia. X 43 H (5) AR H 6 Flg. (1) 850 CFM Steel Steel Anod. Alum. Buna/Neo 300 F (149 C) 15 PSIG (1.0 barg) 150 lbs (68kg) 23 Dia. X 43 H (5) Ordering Information For assistance, call toll-free at AM to 5PM Eastern Time Model No. of Filter Replacement Filter Cartridges Cover (2) No. Pressure Relief Cartridges Required Box of 3 Box of 7 Box of 10 (Optional) Retainers # H (3) 1 3/ H H (4) H (3) 1 3/ H H (4) AR H 1 2/BE H (6) BE H (4) AR H 1 2/BE H (6) BE H (4) AR H 3 3/ H AR H 3 3/ H AR H 7 7/ H AR H 7 7/ H AR H H Included 4 AR H H Included 4 AR H H Included 6 Optional Accessories: #20222 Pressure Relief Filter Cartridge Retainer, 4-7 psig ( barg). #19291 Stand for AR H, #19290 Stand for AR H. #19202 Weather Cap for AR H, AR H. #A Seal Set for AR H, AR H. 1 ANSI 150 lb. hole pattern. 3 Filter cartridge is permanently sealed into housing. The entire unit is disposable. able in these models. alone. When assembled with a stand, the height is adjustable from 46 to 56 (117cm to 142 cm). 6 This model comes in box of 2, not box of
6 Pump Inlet & Exhaust Filters Inlet Filters for Service to 10-6 Torr Protect vacuum pumps from damage by solids and liquids Prevent loss of valuable or hazardous materials Prevent oil backstreaming Model CF-0112 and CF-0118 for Service to 10-6 Torr Filter Selection Chart CF cartridges for removal of high concentrations of solids, but the absence of drain ports precludes vacuum applications. Grade 30 Cartridges Materials of construction: Maximum temperature: Grade 102 Cartridges Life: Maximum temperature: For removal of relatively high concentrations of solids Polypropylene cartridge, EPR seals 180 F (82 C) tion of relatively low concentrations of solids Approximately 1000 hours at 10 microns 100 F (38 C)
7 Pump Inlet & Exhaust Filters Inlet Filters for Service to 10-6 Torr Model CF-0112 CF Torr 10-6 Torr Max. Flow Rating of Pump 3 CFM (5 m 3 /hr) 9 CFM (15 m 3 /hr) Inlet and Outlet Ports KF-25 KF-25 Materials of Construction Head 304 SS 304 SS Bowl 304 SS 304 SS Internals 304 SS 304 SS Seals None None Maximum Temperature 180 F (82 C) (1) 180 F (82 C) (1) Shipping Weight 0.5 lbs. (0.2 kg) 0.8 lbs. (0.4 kg) Dimensions 2.9 W X 4.4 L 3.9 W X 5.9 L (7cm X 11cm) (10cm X 15cm) 1 Maximum temperature grade 102 Cartridge is 100 F (38 F). 2 Filter Cartridge is permanently sealed into housing. The entire unit is disposable. Ordering Information For assistance, call toll-free at AM to 5PM Eastern Time Assembly with Grade 30 Assembly with Grade 102 Number of Filter Cartridges Particulate Filter Backstreaming Filter Required (2) CF CF N/A CF CF N/A 131
8 Pump Inlet & Exhaust Filters Inlet Filters for Service to 2 Torr Protect vacuum pumps from damage by solids and liquids Prevent loss of valuable or hazardous materials Prevent oil backstreaming Models CV and CV for hazardous/corrosive applications R R Stainless steel housings with NPT inlet, outlet and drain Models R and R for nonhazardous/non-corrosive applications and Steel housing with NPT inlet, outlet and drain ports. Filter Selection Chart Grade 30 Cartridges Materials of construction: Maximum temperature: For removal of relatively high concentrations of solids and liquids Polypropylene cartridge, EPR seals 180 F (82 C)
9 Pump Inlet & Exhaust Filters Inlet Filters for Service to 2 Torr Model CV CV R R Max. Flow Rating of Pump 3 CFM 9 CFM 9 CFM 15 CFM(1) Inlet and Outlet Ports 1/2 NPT 3/4 NPT 3/4 NPT 3/4 NPT Drain Port 1/8 NPT (2) 1/8 NPT (2) 1/8 NPT (2) 1/8 NPT (2) Materials of Construction Head 304 SS 304 SS Aluminum Aluminum Bowl 304 SS 304 SS Aluminum Aluminum Internals 304 SS 304 SS Aluminum/SS/Nylon Aluminum/SS/Nylon Seals None None Viton Viton Maximum Temperature 180 F (82 C) 180 F (82 C) 180 F (82 C) 180 F (82 C) Shipping Weight 0.5 lbs. (0.2 kg) 0.8 lbs. (0.4 kg) 1.0 lbs. (0.45 kg) 1.25 lbs. (0.57 kg) Dimensions 2.9 W X 4.4 L 3.9 W X 5.9 L 3.95 W X 5.13 L 3.95 W X 8.13 L (7cm X 11cm) (10cm X 15cm) (10cm X 13cm) (10cm X 21cm) Ordering Information For assistance, call toll-free at AM to 5PM Eastern Time Assembly with Grade 30 Number of Filter Cartridges Box of 2 Box of 10 Particulate Filter Required CV (3) CV (3) R /BE BE R /BE BE consult factory. 2 Drain port must be downward for liquid 3 Filter cartridge is permanently sealed into housing. The entire unit is disposable
10 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Alcatel Pumps ZM/ZT 1004A/AC 3.2 (5.4) NW 25 AR CV ZM/ZT 1012A 11 (19) NW 25 AR ZM/ZT (29) 1 OD Tube AR-0316 ZM/ZT (46) NW 40 AR ZT (51) 1.63 OD Tube AR-0335 ZT (85) NW 40 AR (2) ZT 1200A 150 (255) 1.63 OD Tube AR-0780 ZM/ZT 2004A 3.2 (5.4) NW 25 AR CV ZM/ZT (12) NW 25 AR CV ZM/ZT 2008A/AC 7 (12) NW 25 AR CV ZM/ZT 2012A/AC/H 11 (19) NW 25 AR UM/UT (27) NW 25 AR ZM/ZT 2030/H 17 (29) 1 OD Tube AR-0316 ZM/ZT 2033/C 27 (46) NW 40 AR ZT 2060/H/HUS 30 (51) 1.63 OD Tube AR-0335 ZT 2063/C 50 (85) NW 40 AR (2) ZT 2100A/AC 90 (153) NW 50 AR A 1.4 (2.4) DN , CV (6.5) DN25 AR-009 CV (18) DN25 AR (25) DN25 AR (12) DN25 AR-009 CV-0118 AMD (1.4) DN , CV-0112 AMD (4.0) DN , CV-0112 A100L 55.8 (95) DN25 AR-0735 Roots Vaccuum Pumps RSV (151) ISO/DN63 AR-0735 RSV (301) ISO/DN63 AR-0780 RSV (601) ISO/DN100 AR-1680 RSV (1009) ISO/DN100 LRS1 RSV 151B+RVP2033D 106 (180) DN40 AR-0780 RSV 301B+2033D 212 (360) DN40 AR-1280 RSV 301B+RVP 2063D 212 (360) DN40 AR-1280 LRS2 RSV 151+RVP (180) DN25 AR-0780 RSV 601+RVP (720) DN40 AR-1680 MRS1 RSV 301B+AMV 200/ (360) DN50 AR-1280 RSV 601B+AMV 200/ (360) DN40 AR-1280 RSV 1002AMV200/ (720) DN40 AR Requires 3 Male x 1 1/2 Female reducing bushing supplied by customer
11 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Balzers Pumps UNO/DUO 1.5A 1.0 (2) KF CV-0112 UNO/DUO 004A/B 2.7 (5) KF CV UNO/DUO 008A/B 5.2 (9) KF25 R CV UNO/DUO 012A 8.2 (14) KF25 R CV UNO/DUO 016B 10.6 (18) KF25 R UNO/DUO 030A 19.7 (33) KF40 AR UNO/DUO 060A 39.3 (67) KF40 AR UNO/DUO 250A 157 (267) ISO 100 AR-0780 UNO (95) 32mm OD Tube (4) AR-0735 DUO (97) 32mm OD Tube (4) AR-0735 UNO/DUO 120A 75.3 (128) ISO 63 AR-0735 UNO (155) 32mm OD Tube (4) AR-0735 DUO (170) 32mm OD Tube (4) AR-0735 BA (270) ISO 63 AR-0780 BA (545) ISO 100 AR-1680 UNO (3) DN , CV-0112 UNO (6) G 3/8 R-009 CV-0118 UNO (21) ISO-KF25 R-015 UNO (62) AR-0735 UNO (94) DN40 AR-0735 UNO (210) DN AR-1280 UNO (270) DN AR-1280 UNO (460) DN63 ISO-F AR-3080 UNO (680) DN63 ISO-F AR-3080 DUO (6) DN16 R-009 CV-0118 DUO 10 7 (12) DN25 R-015 CV-0118 DUO (24) DN25 R-015 DUO (36) DN40 AR-0335 DUO (70) DN100 AR-0735 DUO (144) DN63 AR-0780 DUO (300) DN100 AR-1280 Beach-Russ Pumps SS 1 6 (10) 3/4 R-009 CV-0118 SS 1 1/2 9 (15) 3/4 R-009 CV-0118 SS 2 15 (25) 3/4 R-015 SS 3 28 (48) 1 AR-0335 SS 4 45 (76) 1 1/4 AR-0735 SS 5 60 (102) 1 1/2 AR-0735 RP/RV (14) 1/2 R-009 CV-0118 SS 6 75 (127) 1 1/2 AR-0735 SS (187) 2 AR-0780 SS (255) 2 1/2 AR-0780 SS (382) 4 AR-1280 SS (637) 6 AR-1680 RP/RV (31) 3/4 AR-0316 RP (51) 1 1/2 AR-0335 RP (51) 1 AR-0335 RP (85) 1 1/2 AR-0735 RP (85) 1 AR-0735 RP 50/ (136) 2 AR Requires 2 Male x 1 1/2 Female reducing bushing supplied by customer. 5 Requires 1 Male x 1 1/2 Female bushing supplied by customer
12 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Beach-Russ Pumps RP 135/ (238) 3 AR-0780 RP-150/ (297) 3 AR-0780 RP (527) 5 AR-1280 RP (527) 4 AR-1280 RP (637) 5 AR-1680 RP (637) 4 AR-1680 RP (850) 6 AR-3080 RP (850) 4 AR-3080 RP (1529) 8 AR-1680 (2) RP (1529) 5 AR-1680 (2) RP (1869) 8 AR-3080 (2) RP (1869) 5 AR-3080 (2) 84-A-RVF 250 (425) AR A-RVF 410 (697) AR (14) 4 R-009 CV (20) 4 R (29) 4 AR (42) 4 AR (65) 4 AR (83) 4 AR (127) 4 AR (175) 4 AR (240) 4 AR (321) 4 AR (484) 4 AR (642) 4 AR (917) 4 AR (1206) 4 AR-3080 OTL/VP30 50 (85) 1.5 AR-0735 OTL/VP50 80 (136) 2 AR-0735 OTL/VP (238) 3 AR-0780 OTL/VP (297) 3 AR-0780 OTL/VP (527) 5 AR-1680 OTL/VP (637) 5 AR P 48 (82) 1.5 AR P 73 (124) 1.5 AR P 100 (170) 2.5 AR P 125 (212) 2.5 AR P 175 (297) 3 AR P 225 (382) 3 AR P 300 (510) 4 AR (2) 1/ , CV (3) 1/ , CV
13 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Busch Pumps (2.4) KF CV (4.8) KF CV (10) KF-16 R CV (4) /118 6 (10) 3/4 R-009 CV (19) KF-16 R /118 8 (14) 3/4 (3) R-009 CV / (25) 3/4 (3) R / (34) 1 1/4 (3) AR / (48) 1 1/4 (3) AR / (70) 1 1/4 (3) AR / (107) 1 1/4 (3) AR /118/132/ (199) 2 (3) AR (212) 2 AR (340) 2 AR (510) 2 AR /118/132/ (296) 2 (3) AR (850) 2 AR / (510) 2 AR / (731) 3 (3) AR / (1104) 6 (3) AR / (1869) 6 (3) AR-3080 (2) (212) 2 AR (340) 2 AR (527) 2 AR (985) 2 AR (1325) 6 (3) AR (506) 3/8 R-009 CV (701) 3/8 R-009 CV (12) 3/4 R-009 CV (19) 3/4 R (107) 3/4 AR (199) 2 AR (240) 2 AR (306) 2 AR (360) 2 AR (561) 3 AR (702) 3 AR (833) 3x AR (1196) 6 (ASA) AR (1920) 6 (ASA) AR-3080(2) HO (192) 2 AR-0780 HO (299) 2 AR-0780 HO (479) 3 AR-1280 HO (754) 3 AR-1680 LC (35) G1 AR-0335 LC (65) G1 AR-0335 LC (92) DIN40 AR-0735 LC (127) DIN40 AR-0735 LC (170) DIN40 AR-0735 LC (260) DIN50 AR-0780 LC (340) DIN65 AR-0780 LC (460) DIN65 AR Requires 3/4 Male x 1/2 Female reducing bushing supplied by customer
14 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Central Scientific Pumps (Cenco, Boekel, HYVAC) HYVAC 1 (91105) 0.35 (0.59) 3/ CV-0112 HYVAC 2 (91305/8) 0.88 (1.5) 1/ CV-0112 HYVAC 4 (91482) 1.70 (2.9) 1/ CV-0112 HYVAC (4.7) 1/ CV-0112 (91506, 91502) HYVAC 7S (91138) 2.79 (4.7) 1/ CV-0112 HYVAC 14 (91705) 5.6 (10) 3/4 R-009 CV-0118 HYVAC 14S (91140) 5.6 (10) 3/4 R-009 CV-0118 HYVAC 28 (91905) 10.6 (18) 1 1/2 R-015 HYVAC 28S (91142) 10.6 (18) 1 1/2 R-015 HYVAC 45 (91955) 17.7 (30) 1 1/2 AR-0316 HYVAC 150 (91957) 53 (90) 3 AR-0735 HYVAC 300 (91960) 106 (180) 3 AR-0780 MEGAVAC (92003) 2.0 (3.4) 1/ CV-0112 PRESSOVAC (90510/15/16) 1.23 (2.1) 3.8 OD Tube CV-0112 DIRECT DRIVE (90703) 1.9 (3.2) 3/ CV-0112 DIRECT DRIVE (90700) 1.06 (1.8) 3/ CV (7.5) KF25 R-009 CV (12) KF25 R-009 CV-0118 HYPERVAC (23) NW25 R-015 HYPERVAC (36) NW25 AR-0335 HYPERVAC (54) NW40 AR-0335 HYPERVAC (90) NW40 AR-0735 HYVAC30L 1.1 (1.9) , CV-0112 HYVAC50L 2 (3.4) , CV-0112 PRESSOVAC(90510) 1.2 (2.0) 5/ , CV-0112 MEGAVAC (3.4) 1/ , CV-0112 MEGAVAC (85) PORTS ADAPTABLE AR-0735 MEGAVAC (150) PORTS ADAPTABLE AR-0735 MEGAVAC (255) PORTS ADAPTABLE AR-0780 MEGAVAC (425) PORTS ADAPTABLE AR-1280 MEGAVAC (510) PORTS ADAPTABLE AR-1280 SUPRVAC (13) 1/2 FNPT R-009 CV-0118 SUPRVAC (25) 1/2 FNPT R-015 SUPRVAC (34) 1 AR-0335 SUPRVAC (51) 1 AR-0335 SUPRVAC (76) 1 AR-0735 SUPRVAC (119) 1 AR-0735 SUPRVAC (187) 2 AR-0780 SUPRVAC (255) 2 AR (16) 1 R (32) 1 AR (46) 1 AR (100) 2 AR (143) 2 AR
15 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Edwards High Pumps SPEEDIVAC (3.2) 3/8 BSPT CV-0112 E2M1 1.3 (2.2) 3/8 BSPT CV-0112 E2M2 2 (3.4) 3/4 BSPT CV-0112 E1/E2M5 4 (6.8) 3/4 BSPT R CV-0118 EDM6 5 (8.5) 1/2 R-009 CV-0118 E1/E2M8 6.7 (11.4) 3/4 BSPT R CV-0118 EDM (17.5) 1/2 R-015 E1/E2M (25.0) 3/4 R-015 EDM (24.6) 1/2 R-015 E2M30 30 (51.0) KF25 AR E1/E2M40 30 (51.0) KF25 AR ED/ES (5.9) 1/4 R-009 CV-0118 ED/ES (3.9) 1/4 (2) CV-0112 E1/E2M80 57 (96.8) KF25 AR (4) ED/ES (5.9) 1/4 (2) R-009 CV-0118 E1/E2M (212.4) 1 1/2 AR-0780 ED/ES (11.4) 3/8 (2) R-009 CV-0118 E1/E2M (246.4) 1 1/2 AR-0780 ES (20.0) 3/8 (2) R-015 ISC (33.3) 1/2 AR-0316 ED (30.1) 1/2 AR-0316 ED (39.6) 1/2 (2) AR-0335 ISC (66.6) 3/4 AR-0335 ES (120.6) 1 1/2 AR-0735 ES (246.4) 1 1/2 AR-0780 ES (467.2) 2 1/2 AR-1280 RV3 2.7 (4.6) 3/ (4) CV-0112 (4) RV5 4.1 (7.0) NW25 R CV RV8 6.9 (11.7) NW25 R CV RV (17.0) NW25 R Gast Pumps (1.9) 1/ CV (3.2) 1/ CV (4.2) 1/ CV (6.8) 1/4 R-009 CV (6.8) 3/8 R-009 CV (6.8) 1/4 R-009 CV (10.0) 3/8 R-009 CV (10.0) 3/8 R-009 CV (12.2) 3/8 R-009 CV (17.0) 3/8 R (14.1) 1/2 R-009 CV (19.5) 1/2 R (28.9) 3/4 AR (28.9) 3/4 AR (35.7) 3/4 AR (52.7) 1 AR (81.6) 3/4 AR (93.4) 1 AR
16 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Gast Pumps 4BA-1-G482X 1.8 (3.1) 1/ CV AB-1-G482X 1.8 (3.1) 1/ CV BA-1-G492X 1.8 (3.1) 1/ CV BA-1-G (3.1) 1/ CV BA-1-G511X 1.8 (3.1) 1/ CV BA-1-G538X 1.8 (3.1) 1/ CV BA-1-G482X 3.5 (3.1) 1/2 R-009 CV AB-1-G482X 3.5 (5.9) 1/2 R-009 CV BB-1-G482X 3.5 (5.9) 1/2 R-009 CV BA-1-G535X 7.0 (12) 1 R-009 6AB-1-G504X 7.0 (12) 1 R-009 7BA-1-G506X 10.6 (18) 1 R-015 7AB-1-G506X 10.6 (18) 1 R-015 8BA-1-G506X 14.1 (24) 1 1/4 R-015 8AB-G506X 14.1 (24) 1 1/4 R (2.5) 1/ , CV (1.0) 1/ , CV (1.9) 1/ , CV (2.5) 1/ , CV (4.2) 1/ , CV (4.4) 1/ , CV (2.2) 1/ , CV (34) 1 AR (22) 3/4 AR (1.0) 1/ , CV (1.9) 1/ , CV (2.7) 1/ , CV (3.7) 1/ , CV (10) 3/8 R-009 CV (6.8) 3/8 R-009 CV (10) 3/8 R-009 CV (25) 1/2 R (14-36) 3/4 AR (29-36) 3/4 AR (68) 3/4 AR (81) 1 AR (93) 1 AR (93) 1 AR (190) 1 AR-0780 Hitachi Pumps SVF 10F 3.6 (6.1) M24 x 1 R CV-0118 SVR 16F 5.7 (10) M24 x 1 R CV VPS 3.6 (6.1) M24 x 1 R CV VPD/VPS 5.7 (10) M24 x 1 R CV VP 5.7 (10) M24 x 1 R CV VPC 1.8 (3.1) M14 x CV VPC 3.5 (5.9) M14 x 1 R-009 CV
17 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Ingersoll-Rand Pumps AV/AVX2 2.7 (4.6) 3/ CV-0112 BV/BVX2 5.4 (9.2) 3/8 R-009 CV-0118 V23A/V23AX7 9 (15) 3/4 R-009 CV-0118 V235/V235X1 18 (31) 1 AR-0316 V244/V244X2 32 (54) 1 1/4 AR-0335 V255/V255X3 60 (102) 1 1/2 AR-0735 V255X5 60 (102) 1 1/2 AR V/7VX5 99 (168) 1 1/2 AR V/15VX7 133 (226) 2 AR VX (364) 2 1/2 AR V/20VX (500) 2 1/2 AR VD (224) 2 AR VX (364) 2.5 AR V235D (61) AR V244D2 36 (61) AR V255031D5 120 (204) AR E (336) AR VE (449) AR VA (727) AR VA (999) AR (102) 1.5 AR-0735 ITT Pneumotive (Leiman Brothers) B 10 (17) 3/4 R-015 C 18 (31) 1 AR J 20 (34) 1 AR (34) 3/4 AR-0316 C-3 22 (37) 1 AR (59) 1 AR-0335 C-6 37 (63) 1 1/2 AR J 50 (85) 1 1/2 AR (102) 1 1/2 AR (190) 1 1/2 AR J 125 (212) 1 1/2 AR /107J 200 (340) 3 AR
18 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Kinney Pumps KC/KVS/KVC-2 2 (3.4) 3/ CV-0112 KC/KVC-3 3 (5.1) 3/ CV-0112 KC-5 5 (8.5) 3/4 R-009 CV-0118 KVC (9.9) 3/4 R-009 CV-0118 KC-8 8 (13.6) 3/4 R-009 KS (22.1) 1 1/4 R-015 TCS (23.8) 3/4 R-015 KC (25.5) 1 1/4 R-015 KS (25.5) 1 1/4 R-015 KTC (35.7) 1 AR-0335 TCS (35.7) 3/4 AR-0335 KD (56.1) 1 1/4 AR-0335 TCS (51.0) 1 1/4 AR KD (88.3) 1 1/4 AR-0735 TCS (91.7) 1 1/2 AR-0735 KTC (101.9) 1 1/2 (2) AR-0735 KDH (117.2) 1 1/2 AR-0735 TCS (120.6) 1 1/2 AR-0735 KDH (141.0) 1 1/2 AR-0735 TCS (149.5) 2 AR-0735 KTC (181.8) 2 (2) AR-0780 KDH (227.7) 2 AR-0780 KDH (280.3) 2 AR-0780 KT (244.7) 2 (2) AR-0780 KTC (375.5) 3 (2) AR-1280 KT (502.9) 3 (2) AR-1280 KT (839.3) 3 (2) AR-3080 KT (1321.8) 4 Flange AR-3080 KT-170LP 100 (169.9) 2 AR-0735 KT-275LP 162 (275.2) 2 AR-0780 KT-505LP 300 (509.7) 3 AR1680 KT-840FP 490 (832.5) 4 AR-3080 KT-135VFP 780 (1325.2) 5 AR-3080 Lammert Pumps (3.4) 1/ CV (3.4) 1/ CV / (8.5) 3/4 R-009 CV / (12.7) 1 R-009 CV / (17.0) 1 R (25.5) 3/4 R / (34.0) 1 1/4 AR / (51.0) 1 1/4 AR / (51.0) 1 1/4 AR / (85.0) 1 1/4 AR / (127.4) 2 AR /05133/ (169.9) 2 AR (212.4) 3 AR / (254.9) 3 AR (339.8) 3 AR / (424.8) 3 AR (594.7) 3 AR If no part number is listed, adaptor is not supplied by Parker.In most cases, customer can Refer to pages Exhaust port is horizontal. Customer should
19 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Leybold Heraeus Pumps D/S 2A 2.2 (3.7) KF CV D/S 4A 4.5 (7.6) KF 16 R CV (3) D/S 8A 7.0 (12) KF 25 R CV D 4B 3.4 (5.8) KF 16 R CV (3) D 8B 6.9 (12) KF 16 R CV (3) D/S 16A 14.1 (24) KF 25 R D25 20 (34) KF 25 AR D/S 30A 26.8 (46) KF 40 AR SV (51) 1 1/4 AR-0335 DK (54) KF 50 AR-0335 D/S 60A 36.7 (62) KF 40 AR D (90) KF 40 AR (4) SV (76) 1 1/4 AR-0335 E (83) KF 50 AR-0735 D/S 90A 55 (93) KF 40 AR (4) DK (110) KF 50 AR-0735 SV (119) 2 AR-0735 E (160) KF 50 AR-0735 SV (212) 2 AR-0780 DK (221) 3 ASA Flange AR-0780 E (275) 3 ASA Flange AR-0780 SV (340) 2 AR-0780 SV (540) 3 AR-1280 SV (574) 3 AR-1680 D25BCS 20 (34) AR-0316 D40BCS 32.5 (55) AR-0335 D65BCS 53 (90) AR-0735 D25B 20.9 (36) AR-0335 SV16B 11.2 (19) AR-0316 SV25B 18.3 (31) 1/2 NPT AR-0136 SV65B 41.8 (71) AR-0335 SV100B 68.9 (117) AR-0735 SV (220) AR-0780 SV (340) 2 BSP AR-0780 SV (571) AR-1680 SV (841) AR-3080 SV (1150) AR-3080 SP (301) AR-0780 SP (630) AR-1680 SV40B 31.2 (53) AR-0335 D10E 9.3 (16) R Requires 2 Male x 1 1/2 Female reducing bushing supplied by customer. 3 Requires 3/4 Male x 1/2 Female reducing bushing supplied by customer. 4 Requires 3 Male x 1 1/2 Female reducing bushing supplied by customer. 5 Requires Multiple Filters piped in parallel
20 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Marvac Pumps A (1.8) 3/ CV-0112 A (1.8) 3/ CV-0112 A (2.7) 3/ CV-0112 A (2.7) 3/ CV-0112 A (5.9) 1/2 R-009 CV-0118 B (4.5) 1/ CV-0112 B (9.3) 3/4 R-009 B-6 20 (34.0) 1 1/4 AR-0316 B (6.0) 1/2 R-009 CV-0118 B (15.0) 1 R-009 CV-0118 B (11.9) 3/4 R-009 CV-0118 R (2.5) 3/ CV-0112 R (2.5) 3/ CV-0112 R (4.5) 3/ CV-0112 R (9.3) 3/8 R-009 CV-0118 Maxima Pumps (Fisher Scientific) D2A ( A) 2.2 (3.7) KF CV D4A ( A) 4.5 (7.6) KF 16 R CV (3) D8A ( A) 7.0 (11.9) KF 25 R CV D16A ( A) 14.1 (24.0) KF 25 AR D30A ( A) 26.8 (45.5) KF 40 AR D60A ( A) 36.7 (62.4) KF 40 AR (4) D90A ( A) 55 (93.4) KF 40 AR-0735 M4C 2.6 (4.4) , CV-0112 M6C 3.4 (5.8) R-009 CV-0118 M8C 6.1 (10.4) R-009 CV-0118 Precision Scientific Pumps DD (1.2) 3/ CV-0112 D (1.5) 3/ CV-0112 S/PV (2.1) 3/ CV-0112 DD (3.0) 3/ CV-0112 D (4.6) 3/ CV-0112 DD (5.4) 3/4 R-009 CV-0118 DD (6.0) 3/4 R-009 CV-0118 D (9.0) 3/4 R-009 CV-0118 DD/DDC (11.9) 3/4 R-009 CV-0118 S/D (18.0) 1 R-015 DD/DDC (18.7) 3/4 R-015 DD/DDC (28.9) 3/4 AR-0316 S/D (29.9) 1 1/4 AR-0316 S/D (60.0) 1 1/2 AR-0335 S/D (90.0) 1 1/2 AR Requires 1 1/2 Male x 1 Female reducing bushing supplied by customer. 4 Requires 3 Male x 1 1/2 Female reducing bushing supplied by customer. 5 Requires 2 Male x 1 1/2 Female reducing bushing supplied by customer
21 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Quincy Pumps QSVB (134) 1 1/4 AR-0735 QSVB (228) 1 1/4 AR-0780 QSVI (270) 2 1/2 AR-0780 QSVI (535) 2 1/2 AR-1280 QV (14).5 NPT R-009 CV-0118 QV-1 12 (20).5 NPT R-015 QV (42).75 NPT AR-0335 QV-2 38 (65) 1 NPT AR-0335 QV-3 50 (85) 1 NPT AR-0735 QV-5 75 (127) 1.5 NPT AR-0735 QV (175) 1.5 NPT AR-0780 QV (240) 2 NPT AR-0780 QV (621) 2 NPT AR-0780 QV (416) 3 NPT AR-1280 QV (642) 3 NPT AR-1680 QV (917) 4 NPT AR-3080 QV (1216) 4 NPT AR Requires 1 1/2 Male x 1 Female reducing bushing supplied by customer. 4 Requires 3 Male x 1 1/2 Female reducing bushing supplied by customer. 5 Requires 2 Male x 1 1/2 Female reducing bushing supplied by customer
22 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Rietschle Pumps VAL/VL/VE (12) NW 25 R CV VF/VFE/CLFG (12) 1/2 R-009 CV-0118 VF/VFE (17) 1/2 R-015 CLFG/CLF/CLFE (17) 1/2 R-015 VAL/VL/VLV (29) NW 25 AR VF/VFE (29) 3/4 AR-0316 CLFG/CLF/CLFE (29) 3/4 AR-0316 VL/VLV (51) NW 25 AR VF/VFE (46) 3/4 AR-0335 CLFG/CLF/CLFE (46) 3/4 AR-0335 VL/VLV (68) 3/4 AR-0335 VF/VFE (68) 3/4 AR-0335 CLFG/CLF/CLFE (68) 3/4 AR-0335 VL/VLV (92) NW 40 AR (4) VF/VFE (92) 1 AR-0735 CLFG/CLF/CLFE (92) 1 AR-0735 VL/VLV (114) NW 40 AR (4) VF/VFE (114) 1 1/4 AR-0735 CLFG/CLF/CLFE (114) 1 1/4 AR-0735 VWZ (114) NW 65 AR-0735 CLF/CLFE (160) 1 1/2 AR-0735 VFH/VFEH (183) 2 AR-0780 VWZ (183) NW 65 AR-0780 CLF/CLFE (183) 2 AR-0780 VWZ (287) NW 65 AR-0780 CLFH/CLFEH (391) 3 AR-1280 VWZ (459) NW 65 AR-1280 CLFH/CLFEH (574) 3 AR-1680 CLFH/CLFEH (724) 3 AR-1680 CLFH/CLFEH (1150) 3 AR-3080 VLV (31) 3/4 NPT AR-0316 VLV (31) AR-0316 VLV (48) 3/4 NPT AR-0335 VLV (48) AR-0335 VWZ (839) AR-3080 VWZ (1199) AR-3080 VGD10 7 (12) R-009 CV-0118 VGD15 11 (19) R-015 VCE15 11 (2) 1/2 NPT R-015 VCE25 18 (31) 3/4 NPT AR-0316 VCE40 28 (48) 1 NPT AR-0335 VC50 35 (59) 1-1/4 NPT AR-0335 VCE60 42 (71) 1 NPT AR-0335 VC75 49 (83) 1-1/4 NPT AR-0735 VC (121) 1-1/2 NPT AR-0735 VC (178) 1-1/2 NPT AR-0780 VC (240) 2 NPT AR-0780 VC (360) 2 NPT AR-1280 VC (479) 3 NPT AR-1280 VC (659) 3 NPT AR-1680 VC (839) 3 NPT AR-3080 VC (1081) 4 NPT AR-3080 VC (1320) 4 NPT AR-3080 VC (1560) 4 NPT VLR (122) 1-1/2 NPT AR-0735 VLR (282) 2 NPT AR-0780 VL (360) 2 NPT AR-1280 VLR (462) 3 NPT AR-1280 VLR (600) 3 NPT AR If no part number is listed, adaptor is not supplied by Parker. In most cases, customer can assemble adaptor from standard pipe Requires 1 1/2 Male x 1 Female reducing bushing supplied by customer Requires 3 Male x 1 1/2 Female reducing bushing supplied by customer. 5 Requires 2 Male x 1 1/2 Female reducing bushing supplied by customer.
23 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps RO-FLO Pumps (Allis-Chalmers) 5CCA 55 (93) 1 1/2 AR CCB 86 (86) 1 1/2 AR DB 151 (151) 3 AR DC 235 (235) 3 AR DB 275 (275) 3 AR DE 345 (345) 3 AR GB 411 (411) 4 AR GC 593 (593) 4 AR S 738 (738) 5 AR L 838 (838) 5 AR S 970 (970) 6 AR-3080 (2) 12L 1080 (1080) 6 AR-3080 (2) 17S 1228 (1228) 6 AR-3080 (2) 17L 1420 (1420) 6 AR-3080 (2) 19S 1693 (1693) 8 AR-3080 (2) 19L 1920 (1920) 8 AR-3080 (2) 23C 2270 (2270) 8 AR-3080 (2) 23D 2740 (2740) 8 AR-3080 (2) 27D 3300 (3300) 10 AR-3080 (2) 33D 5950 (10109) 14 AR-3080 (2) Sargent-Welch Pumps (19) 1-20 R (39) 1-3/4-20 AR (59) Square Flange AR (18) 1-20 R-015 (3) (10) 1-20 R CV (1.5) 3/ CV (121) Square Flange AR (170) Square Flange AR (30) 1-3/4-20 AR (90) Square Flange AR (2.1) 3/ CV (1.5) 3/ CV (10) 1-20 R CV (5.9) 1-20 R CV (3.6) 3/ CV (1.2) 1/2 Hose CV (1.5) 3/ CV B/8804B 0.9 (1.5) 3/ CV K/8804K 0.7 (1.2) 3/ CV (3.1) CV B/K 1.8 (3.1) NW CV (5.9) CV B 3.5 (5.9) NW 25 R CV K 2.9 (4.9) NW CV (10) NW 25 R CV (9.0) 1-20 R CV B/K 5.3 (9.0) NW 25 R CV (13) NW 25 R CV (18) 1-3/4-20 R (20) NW 40 R (31) NW 40 AR (60) NW 50 AR (90) NW 50 AR (13) 3/4-20 R CV (3.1) NW CV (6.5) NW 16 R CV (4) 8910A 3.1 (5.3) NW 16 R CV (4) (10) 1-20 R CV (13) NW 25 R CV Consult factory for piping considerations. 4 Requires 3/4 male x 1/2 female reducing bushing supplied by customer.
24 Pump Inlet & Exhaust Filters Exhaust Filters for Pumps Stokes Pumps V (12) NW 25 R CV V (19) NW 25 R V (34) NW 40 AR V (62) NW 40 AR V (93) NW 40 AR (3) 146H 30 (51) 1 1/4 AR H 50 (85) 1 1/2 AR H 80 (136) 1 1/2 AR HS 100 (170) 1 1/2 AR HS 150 (255) 2 AR H 300 (510) 3 AR H 600 (1019) 3 AR H 728 (1237) 5 AR J 150 (255) NPT AR J 300 (510) 3 NPT AR J 600 (1019) 3 NPT AR-3080 Ulvac Pumps G (0.4) M17 x CV-0112 G (1.1) 3/ CV-0112 G/GC-25S 0.84 (1.4) 3/ CV-0112 G/GC-20D 0.84 (1.4) 3/ CV-0112 G-50S/D 2.1 (3.6) 3/ CV-0112 GC-50D 2.1 (3.6) 3/ CV-0112 G-100S/D 4.2 (7.1) 1 R-009 CV-0118 GC-100D 4.2 (7.1) 1 R-009 CV-0118 GVD (3.6) 3/ CV-0112 GVD (10) 1 R-009 CV-0118 GVD (12) 3/4 R-009 CV-0118 DA-30S 1.1 (1.9) 3/ CV-0112 DA-60S 2.5 (4.2) 3/ CV-0112 D-330D 9 (15) 1 1/2 R-009 CV-0118 D-650D 18 (31) 1 1/2 AR-0316 D-950D 27 (46) 2 AR-0335 PKS (97) 2 AR-0735 PKS (182) 3 AR-0780 PKS (425) 4 AR-1280 PVD (11) 3/4 R-009 CV-0118 PDV (22) 1 R-015 Varian Pumps CS/SS/SD (5.4) NW 25 R CV EVAC (12) 3/4 R-009 CV-0118 EVAC (19) 3/4 R-015 CD/SD (12) NW 25 R CV CD/SS/SD (19) NW 25 R CD/SS/SD (46) NW 40 AR CD/SS/SD (85) NW 40 AR (3) CD/SD (153) NW 50 AR Requires 3 Male x 1 1/2 Female reducing bushing supplied by customer. 4 Requires 2 Male x 1 1/2 Female reducing bushing supplied by customer
25 Pump Inlet & Exhaust Filters Pump to Filter Adaptors - Straight Thread to NPT Thread Materials of Construction Dimensions Inches (cm) Type Adaptor Style Adaptor Seals (A) Height (B) Hex Size (C) NPT Thread (D) Thread Alum. Buna-N 3.0 (7.62) /4 M24 x (6.60) 1/2 F (1) (6.20) 1/2 F (1) 3/ (7.32) /2 1 3/ (5.56) (7.62) / (5.84) / (8.00) /4 3/4 BSPT (2) (7.11) 1/2 F (1) 3/4 BSPT (2) (6.50) 1/2 F (1) 3/8 BSPT (2) 1 Female NPT - all others Male. 2 O-ring not supplied on adaptors with tapered threads
26 Pump Inlet & Exhaust Filters Pump to Filter Adaptors - Flange to NPT Thread Materials of Construction Dimensions Other Fittings Type Adaptor Style Adaptor Clamp Seals (A) Height inches (cm) (B) NPT Thread (Inches) (C) KF Flange (2) Included Alum (6.05) 1 1/2 KF Stain. St (5.23) 1/2 KF-25 3/4 x 1/2 Reducing Bushing Stain. St (5.38) 1/2 KF (6.05) 1 1/2 KF (5.08) 1 KF Alum. 1/2 F (1) KF KF /2 x 1 Reducing Bushing (5.23) 3/4 KF-25 1 x 3/4 Reducing Bushing (5.83) 1/2 KF-16 1/2 coupling and 3/4 x 1/2 Reducing Bushing 1 Female NPT - all others are Male 2 The designation KF and NW are interchangeable
Balston Vacuum Pump Exhaust Eliminate 99.9% oil mist and smoke from vacuum pump exhaust Prevent oil accumulation in ductwork Recover expensive lubrica
Exhaust filters eliminate oil mist and smoke from vacuum pump exhaust Prevent oil backstreaming Prevent oil accumulation in ductwork Protect vacuum pumps and reduce costly maintenance Balston Sample Filters
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
Vacuum Pumps. Rotary Pumps F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 F24
F Rotary Vacuum Pumps CONTENTS Vacuum Pumps Rotary Pumps Page F12 F13 F14 Edwards. RV Edwards. ES Edwards. EM. Small Edwards. EM. Medium Edwards. EM. Large F15 F16 F17 F18 F19 Oerlikon Leybold. S Oerlikon
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
STC Solenoid Valve List Price
STC Solenoid Valve List Price To Order, Please Specify: 1. Model No. 2. Voltage 3. Electrical Entry Options Voltage & Electrical Connection Options B. Electrical Connection 2V025-1/8 1/8 2/2/2/1 2V025-1/4
VALVES std $ fp $ fp $
std = standard port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS fp = full port Code No. Part No. Size Price 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364
TUBE FLOW METERS. design features INTERCHANGEABLE. 150 mm Meter with CV TM Valve
P SINGLE FLOW METERS INTERCHANGEABLE Designed for low fl ow rates, the Model P fl ow meter is a precision instrument embodying the inherent simplicity, versatility and economy of the classical rotameter.
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in 4 6 Air return Manual operator Solenoid 4-way pilot with balanced poppet Bonded spool 2 7 8 2 67
SPRING LOADED VENTS. Set Points of 3 PSIG and Above PROTECTOSEAL
SPRING LOADED VENTS Set Points of 3 PSIG and Above PROTECTOSEAL SERIES STYLE 9540 End-of-Line Pressure/Vacuum Breather Vent 19540 Pipe-Away Pressure/Vacuum Breather Vent 9240 End-of-Line Vacuum Relief
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
Installation Components AirCare Air Preparation Systems
Modular Line Filters 602104 602106 602108 602109 250 psig / 17 bar Body Material icle Zinc Zinc* * Sintered Polypropylene 40µ 602104 Drain Type Port PTF ¹ ₄ 602106 Manual ³ ₈ A B C Dia. 5.27 / 1.34 0.75
Installation Components AirCare Air Preparation Systems
Care Preparation Systems Modular Line Filters 602104 602106 602108 * Transparent 602109 nylon liquid level indicator -18 lens. to 79 C Body Bowl Material icle Zinc Aluminum Zinc* Aluminum* Sintered Polypropylene
AGD AND AGD4A SERIES
Job Name: Job Location: Engineer: Tag: AGD AND AGD4A SERIES DESCRIPTION The Apollo Air Gap Drain (AGD) is designed to funnel minor discharges from a Reduced Pressure Backflow Preventer s relief valve due
Double Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves
![62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves](/thumbs/86/94937198.jpg "62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves")
Table of Contents Bronze Ball Valves 3 Series See Commercial Price List [CPPL9000] 70 Series...4-5 71 Series...5 75 Series...6 77 Series...7-8 77C Series...8-9 77W Series See Commercial Price List [CPPL9000]
12AT/50AT Series. Spin-On Filters. Global Filtration Technology
1AT/5AT Series Spin-On Filters Global Filtration Technology 1 1AT/5AT Series Applications for Spin-On Filters n Mobile Equipment n Hydrostatic Drives n Industrial Power Units n Reservoir Breathers Often,
ANDERSON GREENWOOD TYPE 4410 SIDE ENTRY ATMOSPHERIC VACUUM RELIEF VALVES
Weight or spring loaded valves with a side inlet capable of high capacity vacuum relief. Designed to work closer to a tank's MAWV, increasing productivity, reducing emissions and product evaporation FEATURES
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By:
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions
A Issue F. Instruction Manual. EMF3, EMF10 and EMF20 EMF20 Oil Mist Filter
Instruction Manual A462-26-880 Issue F EMF3, EMF10 and EMF20 Oil Mist Filters Description EMF3 Oil Mist Filter EMF10 Oil Mist Filter EMF20 Oil Mist Filter Item Number A462-20-000 A462-26-000 A462-29-000
JRPH/JRPL Series. Pressure Reducing Valves. a division of Jordan Valve PRESSURE REDUCING VALVE JRPH & JRPL SERIES FLOW CONFIGURATIONS
a division of Jordan Valve JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVE The LowFlow JRPH Series and JRPL Series are piston operated, balanced trim pressure regulators with high Cv's
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting 2 STAINLESS
PHONE: 937/ FAX:
Magnetic Tank Cleaners Multi Magnet Standard or Heavy Duty Lenz magnetic tank cleaners pick up material that ordinary filters miss and thus maintain cleaner oil. The cleaner the oil; the less problems
Mark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
Gaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs.
2009 Fluid Handling Components Gaskets Bee Valve offers a full line of original and replacement gaskets to meet all your needs. Bolted Tank Fitting Bulkhead Fitting Manifold System Cam Coupler Tank Lid
FITTINGS CHEST FITTINGS CHEST. Get organized with the Pneuforce Fittings Chest!
FITTINGS CHEST FITTINGS CHEST Get organized with the Pneuforce Fittings Chest! Over 40 Different Compartments Easy Carry Handle Holds and Includes 420 Fittings All threaded Models Have the Unique Pneuforce
Manifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
Basic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
Varian, Inc. Vacuum Technologies. Rotary Vane Pumps. Features and Benefits 2-3. Typical Applications 4-5. Pump Models 6-19.
Varian, Inc. Vacuum Technologies Rotary Vane Pumps Features and Benefits 2-3 Typical Applications 4-5 Pump Models 6-19 Accessories 20 Frequency Inverter Technology 21 HS Series Pumps 22-25 MS40+ Features
W1500 SERIES HYDRAULIC PUMP
W1500 SERIES HYDRAULIC PUMP Concentric AB Innovation in Hydraulics PRESSURE (P1) 276 BAR (4000 PSI) (P2) 300 BAR (4400 PSI) SPEED 3300 RPM Min. 500 RPM at 4000 PSI (276 BAR) Continuous EFFICIENCY Overall
MODEL 345 HIGH PRESSURE REDUCING REGULATOR TECHNICAL BULLETIN 345-TB FEATURES High inlet and outlet pressures; high pressure drops.
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 345 HIGH PRESSURE REDUCING REGULATOR The Model 345 is a piston style, heavy duty, high pres sure reducing regulator that can include bal anced trim
AIR HOSE / COUPLERS Air Hose / Couplers For Use with 3538, 3539 ColorConnex Green Coupler Type B, 1/4 in MNPT
3536 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in FNPT 3541 For Use with 3543, 3544 ColorConnex Blue Type C, 1/4 in FNPT 3537 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in MNPT 3542
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS
Quincy Parts & Accessories
Quincy Parts & Accessories True Blue Reliability SM Table of Contents This book is divided into ten convenient categories and an alphabetical Index. If you know the item you wish to order, please refer
R5 Series Vacuum Pumps and Systems
R5 Series Vacuum Pumps and Systems R5 Series Rotary Vane Vacuum Pumps & Systems Duplex tank mounted system is one of many standard configurations. Duplex expandable model uses a common skid for mounting
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
ISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
V Series Control Port Ball Valves
Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard
Balston Stainless Steel Compressed Air Filters for Food Processing and Packaging
Balston Stainless Steel ompressed Air Filters for Food Processing and Packaging Bulletin SSompAirFood over Food.pmd 1 9/28/2005, 12:16 PM Stainless Steel ompressed Air Filters for Food Processing and Packaging
Tranquilizer. Surge Suppression for Air-Driven Diaphragm Pumps. Visit our website!
Quality System ISO9001 Certified Environmental Management Systems ISO14001 Certified Tranquilizer Surge Suppression for Air-Driven Diaphragm Pumps Virtually surge-free flows Steadier pressures Less vibration
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
XYTRQ X-Series Price List, Notes & Clarifications
Page 1 of 6 TABLE OF CONTENTS Double Acting (DA) Models and Optional Adders Page 2 Spring Return (SR) Models and Optional Adders Page 2 Additional Actuator Options; Page 2 NAMUR Mounting Plate Position
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Air return 33 34 36 3 37 38 5 67 69 44 46 4 47 48P SERIES
One-Piece Ball Valves. VB2GB, VB23GB Series
One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.
MODEL 55C ECONOMY LIQUID FILTER FLOW RATES UP TO 200 GPM
MODEL 55C ECONOMY LIQUID FILTER FLOW RATES UP TO 200 GPM A NEW ERA IN FILTRATION PERFORMANCE AND INNOVATION TM ISO 9001 Chemelean Liquid Housings & Cartridges Looking for an easy to use, versatile filter
Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features
Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure
DPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
800 Series Control Valves
AGRICULTURE 800 Series Control s VALVE SELECTION GUIDE ENVIRONMENTAL GREEN INDUSTRY nelsonirrigation.com 1 Control s As a hydraulically operated sleeve-type valve, the 800 Series Control is designed for
EVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Manual operator Solenoid Individual mounting Sub-base non Sub-base Manifold mounting Manifold base Sub-base/ manifold base non with latching solenoid
Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
Dual Stage Rotary Vane Pumps
VACUTEC P.O.BOX 48488 Roosevelt Park 2129 South Africa Tel: +27 (0) 11 475 1823 Fax: +27 (0) 11 475 1819 Email: sales@vacutec.co.za Dual Stage Rotary Vane Pumps Features and Benefits 16-17 Typical Applications
Product Tips and Features
6.00.01 anifolds & Valve Packs Product Tips and Features Cover Plates Cover Plates are used in place of directional valves to either completely block off a bar manifold station, or to provide a means of
AGILENT ROTARY VANE PUMPS
AGILENT ROTARY VANE PUMPS 2-3 Features and Benefits 4-5 Typical Applications 6-9 Pump Models 20 Accessories 2 HS Series Pumps Features and Benefits 22-25 HS Series Pump Models 26-27 MS 40+ Pump Features
KAMLOK AUTOLOK QUicK coupler SySTeMS
KAMLOK AUTOLOK Quick Coupler Systems KAMLOK Twin-Kam Quick couplings OPW Kamlok quick-disconnect couplings are the industry standard in cam and groove couplers for safety and ease of use. All OPW Kamlok
Western Pacific Products, Inc.
BRACKETS, GROMMETS, & BEZELS 142 2 1/2 Grommets Allows 2 1/2 diameter sealed units to be flush mounted. Requires 3 mounting hole and 142-49 or 162-49 plug to complete installation. Kits include 142-18
AGILENT ROTARY VANE PUMPS
AGILENT 2-3 Features and Benefits 4- Typical Applications 6-9 Pump Models 20 Accessories 2 HS Series Features and Benefits 22-2 HS Series Pump Models 26-27 MS 40+ Pump Features and Benefits 28-29 MS 40+
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS For more than years, Ingersoll Rand ARO has been an industry leader in the design and ARO-Flo Series manufacture of compressors, pneumatic tools, and
SPARE PARTS PRICE LIST SEAKEEPER SERIES
SPARE PARTS PRICE LIST SEAKEEPER SERIES UPDATED 3.6.2018 COMMON PARTS SECTION PAGE NUMBER ELECTRONIC SUB-ASSEMBLY 6 SEAKEEPER 3 SECTION PAGE NUMBER ELECTRONIC SUB-ASSEMBLY 7 BRAKE SUB-SYSTEM 7 COOLING
Threaded Adapters for Creating Tank Breathers. Element Attachment. Thread. O-Ring (Buna-N) Aluminum Construction. Male Pipe.
Reservoir Breathers Breathers are available in a variety of styles, materials and sizes. Breathers provide clean airflow into reservoirs and other storage containers where there is an exchange of air during
MAC VALVES, INC. Rev. T
REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910
Vickers. Vane Pumps. V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications.
Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications Revised 6/95 560 Introduction Vickers offers the most complete line of hydraulic intravane
Test Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
MAC Pulse Valve PV03 Series
The MAC Pulse Valve series is designed to be a direct drop-in replacement for existing pulse technology. The MAC solution utilizes a long life, bonded-spool design, instead of the traditional diaphragm
F5D Series In-Tank Filter Assembly
F5D 070-150 Series In-Tank Filter Assembly Parts Matrix 501 Del Norte Boulevard Oxnard, California 93030-7983 (805) 604-3700 Fax: (805) 604-3701 filters@ptitechnologies.com www.ptitechnologies.com An ESCO
Mark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
SINGLE TUBE FLOW METERS
P SINGLE TUBE FLOW METERS INTERCHANGEABLE Designed for low flow rates, the Model P flow meter is a precision instrument embodying the inherent simplicity, versatility and economy of the classical rotameter.
accessories Hydroline Filters and Accessories hydroline filters & 14 hydroline filters & accessories Filters Inline Spin on
hydroline filters & accessories Hydroline Filters and Accessories hydroline filters & accessories Prices Sec:2 Suction Strainer Sec:4 Filters Inline Spin on Sec:5 Filter Tank Top Sec:9 Gauge Indicators
HIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
PRODUCT IDENTIFICATION & COMPANY
TECHNICAL DATA SHEET PRODUCT NAME : FLOW METERS SECTION 1 PRODUCT IDENTIFICATION & COMPANY Product Name Flow Meters ( FLOWTECH & BLUE & WHITE) Supplier EZ Water Technology Address 1647 S, Main St. Suite
SECTION TWO - INTERMODAL - VENTING
PEROLO MULTI-SUPERVENTIX SRV KEY PART NUMBER DESCRIPTION 5A PER-11100195 PEROLO SRV SPRING SET, 2.18 BAR 5-6 PER-11100196 PEROLO SRV SPRING SET, 3.75 BAR 5-6 PER-11100197 PEROLO SRV SPRING SET, 4.40 BAR
Owner's Manual. Model: ( ) (150 Gallon, 5.5 HP Skid Sprayer) Technical Specifications. General Information. Warranty/Parts/Service
Owner's Manual Model: -0 (00) (0 Gallon,. HP Skid Sprayer) Technical Specifications General Information Thank you for purchasing this product. The purpose of this manual is to assist you in operating and
$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
hydroline filters and accessories
hydroline filters and accessories 12 Hydroline Filters and Accessories SECTION 12 Prices Suction Strainer Filters Inline Spin on Filter Tank Immersed Gauge Indicators Level Gauge Sight Level Gauge Threaded
Vickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports
Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports Hydraulic Directional Valve P40 2 Spool 4 Way 3 Position Chief 220907. $137.00 Prince Hydraulic Compensated Flow Control RD-175-30 3/4" Port
e-sv Technical Manual e-sv Series Vertical Multi-Stage Pumps
BESV60 e-sv Technical Manual e-sv Series Vertical Multi-Stage Pumps IT T www.goulds.com is a brand of ITT Corporation. is ISO 9001 Registered. PAGE 2 Contents Coverage Curves....4 General Market Specifications...............................................................................
ER V. CARB Phase I Enhanced Vapor Recovery AST Certified Products 8 5 (VR-402-B) Single Wall Tank with Top Fill. 26 Alarm. Pressure Vacuum Vent
CARB Phase I Enhanced Vapor Recovery AST Certified Products 5 (VR-402-B) Sensor Pressure Vacuum 0 Monitoring Clock Gauge Direct Fill Spill Container Dust Cap 9 2 Overfill Prevention Gauge Stick Port Suction
KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
CRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
Low Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Appendix D Outline Dimensions
Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8
TECHNICAL BROCHURE BeSV60 R8. e-sv. 60 Hz Technical Manual E-SV SERIES VERTICAL MULTI-STAGE PUMPS
TECHNICAL BROCHURE BeSV6 R8 e-sv 6 Hz Technical Manual E-SV SERIES VERTICAL MULTI-STAGE PUMPS PAGE 2 Contents Coverage Curves.... 4 General Market Specifications.....................................................................................
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material