TECHNICAL DATA & DRAWINGS
|
|
|
- Claire Peters
- 5 years ago
- Views:
Transcription
1 6 TOP ONLY 6 TOP - 6 BOTTOM STANDARD 6" TOP - 6" BOTTOM with M20 DOME OPENING 6 TOP - 6 BOTTOM, 2 SIDE CONNECTIONS DN 50 (63mm piping) 6 TOP - 6 BOTTOM, 2 SIDE CONNECTIONS DN 80 (90mm piping) DN200 TOP - DN200 BOTTOM DN 400 TOP - 6 BOTTOM, 2 SIDE CONNECTIONS DN 80(90mm piping) DN400 TOP - 6 BOTTOM, DN10O SIDE CONNECTION DN400 TOP - 6 BOTTOM, DN15O SIDE CONNECTION NEW 79" - 2 meter diameter, DN 400 Top - 6" BOTTOM, diameter 125mm connection. TECHNICAL DATA & DRAWINGS CD_CIF1_0900
2 TECHNICAL DATA This pressure vessel is intended for use in water treatment installations. Not suitable for pneumatic applications. FLANGE OPENING: OPERATING PRESSURE: 6 (150 mm) - DN200 - DN400 MIN 0 BAR - MAX 10 BAR OPERATING TEMPERATURE: MIN 1 C - MAX 65 C MINIMUM FATIGUE TESTING: CYCLES BETWEEN 0-10 BAR STANDARD COLOUR: DURALAM BLUE VESSEL, RAL 5015, BLACK BASE OTHER POSSIBLE COLOURS: DISTRIBUTION SYSTEMS: RAL-COLOUR STANDARDS SEE DISTRIBUTION SYSTEMS CATALOGUE CD_CIF2_0900
3 DETAIL 6 FLANGE 6 TOP ONLY C-1445-A3 Ø , Ø ,0 C-1468-A3 Ø , Ø ,0 C-1668-A3 Ø , Ø ,6 C-1868-A3 Ø , Ø ,0 C-2166-A3 Ø , Ø ,6 C-2475-A3 Ø , Ø ,0 C-3078-A3 Ø770 67, Ø ,2 C-3678-A3 Ø , Ø ,0 C-4-A3 Ø , Ø ,5 C-4882-A3 Ø , Ø ,0 CD-TP-I-220A Aeration valve included as from 30 CD_CIF3_0900
4 DETAIL 6 FLANGE DETAIL BASE 6 TOP - 6 BOTTOM STANDARD M (mm) C-1468-F7 Ø , Ø C-1668-F7 Ø , Ø C-1868-F7 Ø , Ø C-2166-F7 Ø , Ø C-2475-F7 Ø , Ø C-3078-F7 Ø770 67, Ø C-3678-F7 Ø , Ø C-4-F7 Ø , Ø C-4882-F7 Ø , Ø C F7 2619, C F7 3220, C F7 3602, C F7 3984, C F7 C F7 C F OPERATING PRESSURE : 638,0 638,0 638, MIN 0 BAR - MAX 10 BAR CD_CIF4_0900 Aeration valve included as from 30 CD-TP-I-219C
5 DETAIL DOME FITTING DETAIL 6 FLANGE DETAIL BASE 6" TOP - 6" BOTTOM with M20 DOME OPENING M (mm) C-3078-D201 Ø Ø C-3678-D201 Ø Ø C-4-D201 * Ø Ø C-4882-D201 * Ø Ø * Not available yet Aeration valve included as from 30 CD_CIF5_0900 CD-TP-I-286A
6 DETAIL SIDE HOLE DETAIL 6 FLANGE DETAIL BASE 6 TOP - 6 BOTTOM, 2 SIDE CONNECTIONS DN 50 (63mm piping) Distance lower sidehole Distance upper sidehole G (mm) H (mm) J (mm) L(mm) / / C-2166-S611 Ø Ø C-2475-S611 Ø Ø C-3078-S611 Ø Ø C-3678-S611 Ø Ø Aeration valve included as from 30 CD_CIF6_0900 CD-TP-I-271B
7 DETAIL 6 TOP/BTMFLANGE DETAIL DN80 DETAIL BASE 6 TOP - 6 BOTTOM, 2 SIDE CONNECTIONS DN 80 (90mm piping) Sidehole distance G (mm) M(mm) / / C-4-S911 Ø Ø C-4882-S911 Ø Ø C S C S C S C S C S C S C S CD-TP-I-282A Aeration valve included CD_CIF7_0900
8 DETAIL DN200 FLANGE DETAIL BASE DN200 TOP - DN200 BOTTOM M (mm) C F C F C F C F C F C F C F Aeration valve included CD-TP-I-233B CD_CIF8_0900
9 DETAIL DN80 DETAIL BASE DETAIL 6 BOTTOM FLANGE DN 400 TOP - 6 BOTTOM, 2 SIDE CONNECTION DN 80 (90mm piping) Sidehole distance G (mm) M(mm) / / C-4281-S911 Ø Ø C-4883-S911 Ø Ø C S C S C S C S C S C S C S CD-TP-I-281A Aeration valve included CD_CIF9_0900
10 DETAIL DN400 TOP FLANGE DETAIL BASE DETAIL 6 BOTTOM FLANGE DN400 TOP - 6 BOTTOM, DN10O SIDE CONNECTION M(mm) / / C-4281-S100 Ø Ø C-4883-S100 Ø Ø C S C S C S C S C S C S C S CD-TP-I-253B Aeration valve included CD_CIF10_0900
11 DETAIL DN400 TOP FLANGE DETAIL BASE DETAIL 6 BOTTOM FLANGE DN400 TOP - 6 BOTTOM, DN15O SIDE CONNECTION M(mm) / / C-4281-S150 Ø Ø C-4883-S150 Ø Ø C S C S C S C S C S C S C S Aeration valve included CD_CIF11_0900 CD-TP-I-254A
12 DETAIL SIDE CONNECTION DETAIL BASE DETAIL 6 BOTTOM FLANGE DN 400 Top - 6" Bottom, diameter 125 mm connection. Sidehole distance New C-79O98-S150 New C S150 New C S150 New C S150 Ø Ø Ø Ø O 112O 112O 112O Ø1969 Ø1969 Ø1969 Ø G (mm) M(mm) / / Aeration valve included CD-TP-I-288 CD_CIF12_0900
Double-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
Table of contents. Attachments, accessories 161
Table of contents Attachments, accessories 6 Product overview Mounting kits for limit switches Mounting kits for proimity switches ocking devices Actuators Detents andles 60 6 Mounting kits for limit switches
Special valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
Worm gear S 345. Properties: General: Single-stage worm gear For use in combination with our motors.
S 345 Aluminium Power deviation 90 Options: Special shaft, 2nd shaft end Loading capacity Max. radial force N 100 Max. axial force N 50 Mounting Shaft diameter mm 6 Weight kg 1.2 Flange 5 1.8 0.65 10 1.9
TA-PILOT-R. Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point
TA-PILOT-R Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point IMI TA / Differential pressure controllers / TA-PILOT-R TA-PILOT-R The TA-PILOT-R
Diaphragm pressure gauge guard MDM 902 corrosion-free pressure transmission for aggressive media
Diaphragm pressure gauge guard MDM 902 corrosionfree pressure transmission for aggressive media Application chemical plants electroplating plants Utilisation for corrosionfree pressure transmission between
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
Cylinders with integrated guide Series QCTF and QCBF
> Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors
DRIVE SYSTEM. Operation and support elements made of stainless steel for chambers and water treatment works
DRIVE SYSTEM Operation and support elements made of stainless steel for chambers and water treatment works Page 1 DALMINEX www.dalminex.de info@dalminex.de DRIVE SYSTEM Foreword DALMINEX, has been producing
BRAZED PHE. Performance - Economy - Reliability - Compact
BRAZED PHE Performance - Economy - Reliability - Compact Head office: PO Box 230, Watford, Hertfordshire WD18 8JY Tel: +44(0)1923 232335 Fax: +44 (0)1923 230266 Email: mail@hrs.co.uk Website: wwwhrshevac.co.uk
2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
Dewatering Submersible sewage pumps
Series description Wilo-Drain TP 80/TP 100 Equipment/function Thermal motor monitoring Leakage detection in the motor ATEX-certified Sheath current cooling Materials Pump housing: PUR Impeller: PUR Shaft:
L170R01 SF 6. For liquid storage. gas service cart. 10" touch panel. Technical data: Dimensions: L mm, W mm, H mm Weight: 890 kg
For liquid storage L170R01 10" touch panel Technical data: Dimensions: L 2.250, W 1.050, H 1.220 Weight: 890 kg C 2980-06 Service carts L170R.. / L280R.. / L550R.. Mega Series For liquid storage L280R..
Materials : Cast iron body EN GJL-250
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges GN10-10 C + 80 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating stem, non rising handwheel No tightness
IMPULSE. Push-latch. Smart Simplicity
IMPULSE Push-latch > Opening and closing system for doors without handles, available in a wide range of versions and finishes, to adapt to all needs. > The embedded version is offered with two different
DN 40 to DN 150 ISO PN10/16 flanges -10 C C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad
Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 150 ISO PN10/16 flanges -10 C + 200 C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad Materials
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Materials : Cast iron or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 700 Between flanges GN10-10 C for cast iron type ( -15 C for S.S. ) + 80 C for cast iron type ( + 110 C for S.S. ) Max Pressure : 10 Bars up
Buchholz Relay MBP Gas and Oil Actuated Relay
Buchholz Relay MBP Gas and Oil Actuated Relay Reed switches for detection of gas formation and dropping oil level Flap valve to protect in case of excessive high oil flow rate Separated oil and switching
Product catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
DN 15 to DN 200 PN10/16 Flanges -10 C C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN10/16 Flanges -10 C + 200 C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball ISO 5211 mounting pad Materials :
INDUSTRY APPLICATION. S -pumps are used in: Industry Waste treatment Environment protection Construction industry Civil engineering
INDUSTRY APPLICATION Self-priming centrifugal pumps of type S are used for pumping clean and contaminated liquids containing solids. The special design makes them suitable also for abrasive liquids. S
Eddy current Dynamometers
Eddy Current Brakes Depliant_2015 Page 1 of 41 Eddy Current Dynamometers from 5 kw to 3200 kw Apicom Eddy Current Dynamometers for all type of engine load test: Steady State load test Transient load test
Drain ball valve BR 21a
PTFE - lined Drain ball valve BR 21a Application: Tight-closing PTFE-lined drain ball valve for corrosive media, especially for high process demand in chemical plants: Nominal sizes DN 50 to DN 150 Nominal
PREMIUM PLASTIC PROTECTION PARTS
PREMIUM PLASTIC PROTECTION PARTS MATERIAL OPTIONS Consistently low prices EP 180 Pressure Pipe Protection Uniplugs for PVC pipes DN 50 DN 600 EP 190 Driveshaft Protection Caps with Fitting Key EP 200 Stud
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating
page 402 page 403 page 405
page 402 page 403 page 405 Quick closing valves Ductile cast iron Pressure rating: PN 10 DN 15-200 Pressure above the disc Actuators easy to exchange Type approval by classification societies Bellow sealed
Tying and fixing system. Cable ties 22. raw material colour U61X U60X. Black. Natural. Grey
Tying and fixing system 22 raw material colour U61X U60X Black Natural Grey 22 U61X U60X For tying of cables and conduits Complete product family for all kind of applications. Hand thread, easier mounting
EXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
5 TANK ¾ VALVE AND 6 TANK 1 VALVE HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS
HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS Standard ColourRHEADER TANK SOLUTIONS DESCRIPTION The patented Mecair Full Immersion System consists of a round header tank with fully integrated diaphragm
Horizontal And Vertical Centrifugal Pumps
Horizontal And Vertical Centrifugal Pumps Lip Bellow Type JP-840 Series Horizontal Centrifugal Pumps are driven by a direct-coupled motor (maximum 3,000 rpm). They are especially suitable for the rapid
Data sheet: Wilo-TOP-S 40/10 (1~230 V, PN 6/10)
Data sheet: Wilo-TOP-S 4/1 (1~23 V, PN 6/1) Pump curves Single-phase current H/m 1 8 v 1 2 3 4 Wilo-TOP-S 4/1 1~23 V - DN 4 5m/s p/kpa 1 8 Approved fluids (other fluids on request) Heating water (in accordance
Automatic COSYS PFC. Automatic power factor correction system NEW
Automatic COSYS PFC Automatic power factor correction system NEW cosys_178_a_1_x_cat cosys_178_a_1_x_cat appli_xxx_a  Function Your reactive energy consumption vary depending on the type and using conditions
Materials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for ) + 90 C for NBR seat ( + 110 C for ) Max Pressure
Check Valves DN PN 80, 100, 160
47 DN 300-1000 PN 80, 100, 160 Designed to automatically prevent back flow of working medium, when transmitting non-aggressive natural gas and other non-aggressive media at the temperature ranged -60 C
Product Catalogue Date:
Product Catalogue Date:- 01.04.2017 Sr. 1 2 Spring 3 Double 4 Re-style 5 Re-style Spring 6 Re-style Double 7 Center OFF SPDT 8 Center OFF 2-Way Spring 9 Re-Style Center OFF SPDT 10 Re-Style Center OFF
3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
10 TANK WITH 2 VALVE HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS
HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS Standard ColourR FULL IMMERSION SYSTEM DESCRIPTION The patented Mecair Full Immersion System consists of a round header tank with fully integrated diaphragm
SLV EN 1092 PN 10 ANSI B16.5 Class 150 AS 2129 Table D AS 2129 Table E
SLV EN 2 PN ANSI.5 Class 0 AS 2 Table D AS 2 Table E Stafsjö s knife gate valve SLV is bi-directional and designed for the most demanding slurry and abrasive applications. It is a full bore valve with
Filter Housing SG ATEX Standard
Page of 7 Filter Housing SG ATX Standard The steel standard filter housings are designed for the purification of compressed air and gases in combustible environment. Due to the modular design of the housings
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Pressure relief controller AVA (PN 25)
Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens
Data sheet: Wilo-Yonos MAXO 40/0,5-16
Data sheet: /,5- Pump curves v 5 5 5 6 P /W n= const 5 5 /,5- ~ V - DN /,5- ~ V - DN 6 m/s Approved fluids (other fluids on request) Heating water (in accordance with VDI 5) Water-glycol mixtures (max.
Enobatna vgradna dvigala. KOCH, SERVISNA OPREMA, d.o.o. Špruha 42, SI-1236 Trzin. Tel.: Fax:
2018-2019 VGRADNA Product Catalogue INGROUND DVIGALA 2017 2018 Enobatna vgradna dvigala KOCH, SERVISNA OPREMA, d.o.o. Špruha 42, SI-1236 Trzin prodaja@koch.si Tel.: +386 1 56 44 770 Fax: +386 1 56 44 772
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Mega Series. gas service carts L170R01 / L280R.. / L550R.. Maintenance devices for large and extra large gas compartments L170R01 / L280R.. / L550R..
s Mega Series Maintenance devices for large and extra large gas compartments These service carts are our most powerful devices and guarantee quick maintenance of gas compartments. Thanks to the state-of-the-art
Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
Decorating with colour
Decorating with colour The working environment can also look good and be inspirational. By choosing the colours of your equipment to match your corporate colours, you can reinforce your corporate image
Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80
> Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers
Materials : Cast iron or Stainless steel
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
Ball valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
Actuator LA27 HOMELINE Analogue. Data sheet LINAK.COM/HOMELINE
Actuator LA27 HOMELINE Analogue Data sheet LINAK.COM/HOMELINE LA27 Analogue The LA27 HOMELINE linear actuator is a powerful product designed especially for comfort furniture applications like leisure beds
Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017
Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range:
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
Company name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
Mega Series. gas service carts L170R01. Maintenance devices for large and extra large gas compartments L170R01 SF 6.
s Maintenance devices for large and extra large gas compartments The L170 service cart has been developed as entry-level model of the for the gas handling on large gas compartments. Thanks to the state-of-the
Buttons and indicators Style 42
Buttons and indicators Style 2 LABEL Style, round Label L, Characteristics Fixing Label L/R, screw fixing, with plastic rim, grey embossing (-marked) (, option: colour, RAL-shades) -marked height of characters
Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
Thermal flow sensor TFS-35
průmyslová elektronika Thermal flow sensor TFS-35 For sensing limit flow rates of fluid media and for monitoring their temperature. These sensors are intended for installation in pipes, in which the actual
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
INDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY RANGE OF ACCESSORIES COMPETENCE CENTRE INDUSTRIAL VACUUMING. Valid from
INDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY Valid from 01.01.2019 COMPETENCE CENTRE INDUSTRIAL VACUUMING 2 3 DEAR CUSTOMER, This catalogue provides you with an essential selection of the
Heavy-Duty Suspension System CS-2000 System 80
Heavy-Duty Suspension System CS-2000 System 80 With its large number of components, the BERNSTEIN CS-2000 System 80 suspension system offers technically perfected solutions for a wide range of applications.
Options ONLY FOR CD-ROM CATALOGUES CATALOGUE FILE SIZE 1.90MB. No. PAGES RELAISE 11/2006 MODELS GROUP Z.F.
CATALOGUE Z.F. FILE 95CBM037.pdf SIZE 1.90MB No. PAGES 12 RELAISE 11/2006 MODELS ECOMID 1304 8S180 8S180 GROUP Gearbox Options ONLY FOR CD-ROM CATALOGUES %?? Zoom Home Group Back Select Print Page Search
Pressure relief controller for oil V22D28 (PN 16, 25)
Data sheet Pressure relief controller for oil V22D28 (PN 16, 25) Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure setting. Features: - safe
Aggressive Environments SERIES
Aggressive Environments SERIES The need to provide geared motors suitable for use in wet and corrosive environments has led Motovario to design a new product range specific for these fields. These products
BIDIRECTIONAL WAFER Knife Gate Valve
31/07/2014 BIDIRECTIONAL WAFER Knife Gate Valve - Bidirectional wafer-design knife gate valve. - One-piece cast body. - Provides high flow rates with low pressure drop. - Various seat and packing materials
UNIDIRECTIONAL Knife Gate Valve
UNIDIRECTIONAL Knife Gate Valve 24/04/2013 Unidirectional knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat
Globe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
TECHNICAL DESCRIPTION Rescue Rod s AIR DISPLACEMENT UNIT MODEL MEGAVAC LOADER 8000 EVO Wet & dry vacuum
PRESSURE/VACUUM TANK - Volume : approx.13.400 litres, incl. the filter room. - Diameter : Ø 1.900 mm. - Material : stainless steel AISI 304 grade. - Suction connections : 6 block flange, provided with
RF2 Maximum pressure 20 bar F l o w r a t e s t o l / m i n
RF2 96 Maximum pressure 20 bar F l o w r a t e s t o 4 5 5 l / m i n Filter housing (Materials) Filter body: luminium over: Nylon Valve: Nylon - Steel nti-emptying valve: Steel Pressure Working pressure:
CRN45-10 A-F-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN45-1 A-F-G-V-HQQV 3x4/69 5 HZ Grundfos Pump 9612316 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn45/9612316/crn-45-1-a-f-g-v-hqqv.html
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
Ball Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle
Pressure degassing systems
Pressure degassing systems A degassing system consists of several components: Degassing unit Feedwater tank Instrumentation and control technology Steel structures, platforms and ladders Exhaust vapours
Thermal flow sensor TFS-35
průmyslová elektronika Thermal flow sensor TFS-35 For flow monitoring rates of liquids media and for monitoring of their temperature These sensors are intended for installation in pipes, in which the actual
CR45-10 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR45-1 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 96122815 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96122815/cr-45-1-a-f-a-e-hqqe.html
Flow rates to 500 l/min
FF 5 Filter housing in according to SE J066 for F filter elements Maximum pressure 50 bar Flow rates to 500 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing:
Transformer Oil Cooling Solutions
pumps and fans Transformer Oil Cooling Solutions Series NTG/ TG/ TGCL Pumps TF/ TFBR/ NTF/ VTTF Fans quality certificate INDEX The company Portfolio Development PUMPS Nomenclature Inline axial pumps NTG
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 36 m 3 /h Optimal delivery head H opt 6.0 m Optimum
ACCESSORIES ACCESSORIES 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2215 COUNTER SCREEN
ACCESSORIES GROUP NAME 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2216 COUNTER SCREEN 2215 COUNTER SCREEN 24XX 240X EYEBOLT CAGE NUT 340.00.135 TOGGLE LATCH 340.00.133
2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 176 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN
FIXED CONE VALVE. The flow is guided by the inner vanes, in order to decrease the vortex and the vibration;
BEI JI NG JOI NTFLOW SYSTEM CO. FI XEDCONEVALVE The Fixed cone Valve is typically operated by a manual, electric or hydraulic actuator mounted above the bevel gear. The bevel gear transmits torque to the
Introduction. Series A99 Temperature Sensors. Features and Benefits
PSC92 European Refrigeration Controls Catalogue Catalog Section Product Bulletin A99 Series A99 Temperature Sensors Introduction The A99 Temperature sensor line offers an economical solution for a wide
Data sheet: Wilo-TOP-Z 50/7 (3~400 V, PN 6/10, RG)
Data sheet: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Pump curves Three-phase current H/m 7 6 5 4 3 2 1 P1/W 6 4 2 v,5 1 1,5 2 2,5 3 3,5 Wilo-TOP-Z 5/7 3~4 V - DN 5 1 2 3 4 5 6 7 Dimension drawing 66 66 DN 5
solids solutions group
Pneumatic dense phase conveying by a push conveying process with high load and slow conveying speed for gentle conveying. Hygienic-Dry Design according to EHEDG-Guidelines for dry processes with dry cleaning,
The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).
/2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and
Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water
Data sheet Pressure reduction controllers (PN 25) - for steam AVD - for water Description Main data AVD: DN 15-50 k VS 0,4-25 m 3 /h PN 25 Setting range: 1-5 bar / 3-12 bar Temperature: - Circulation water/glycolic
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
BIDIRECTIONAL Knife Gate Valve
BIDIRECTIONAL Knife Gate Valve 30/10/2013 Bidirectional knife gate valve. Two piece cast body, joined by screws, with internal guides for smooth movement of gate during operation. Provides high flow rates
Aggressive Environments
n Aggressive Environments e w The need to provide geared motors suitable for use in wet and corrosive environments has led Motovario to design a new product range specific for these fields. These products
CRN45-5 A-F-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN45-5 A-F-G-V-HQQV 3x4/69 5 HZ Grundfos Pump 9612315 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn45/9612315/crn-45-5-a-f-g-v-hqqv.html