solids solutions group

Transcription

1 Pneumatic dense phase conveying by a push conveying process with high load and slow conveying speed for gentle conveying. Hygienic-Dry Design according to EHEDG-Guidelines for dry processes with dry cleaning, for food, pharmaceutical, cosmetics and chemical industry. Operation purpose: Pneumatic pressure conveying vessel with complete facilities. Discontinuous operation, filling with bulk solid when the inlet valve is open under atmospheric conditions. Then locking pressure tight, and discharging the bulk solid and conveying with compressed air into the connected pipeline. Advantages: For granulates, dusts and mixtures Slow and gentle conveying with less compressed air and energy consumption Fulfills 2006/42/EG machinery directive and GMP-requirements easy dismantling, easy cleaning by removable housing parts with quick clamping rings No segregation of mixtures Efficient operation even with inert gases Small exhaust air filters due to low air volumes No particle breakage due to mechanical moving parts High reliability of operation due to the possibility for controlling the working parameters approval: MIGSA SST H. Linder Date: Sign: Date: Sign: Date: Sign: Li Preliminary modifications reserved Seite 1 von 9

2 Operating conditions: Permissible operating pressure: 3 barg Load cycles between 0 and 3 bar: rated for endurance strength Product temperature max: 70 C Max./Min. ambient temperature: -10 C T 50 C Bulk solids data: Powdered till granulates, up to middle hardness, from free flowing up to nonflowing products Type geom. Volume dm 3 Volume for Use dm 3 Inlet-Ø mm Height mm Weight kg PIP00405YD / PIP00605YD / PIP00905YD / PIP01207YD / PIP02507YD / PIP03507YD / PIP04510YD / PIP06510YD / Complete assembly -approved according to pressure equipment directive 2014/68/EU Welded steel construction stainless steel (DIN) / 304L (AISI) Fulfils 2006/42/EC machine directive with appendix 1 chapter 2.1. food machines, EHEDG- Guidelines, as well as GMP- requirements for intended use. Surface quality inside according EN B with roughness value Ra 0,8 µm, metal plates external over 6 mm wall thickness with surface quality 1D according EN and fine glass bead blasted (satin gloss) Easy to dismantle, for dry cleaning only Seite 2 von 9

3 Basical version: Datasheet Material inlet valve and sender locking with a disc valve type DKA-D with inflatable sealing and centering flanges Compensator Deaeration valve with ball valve, with divided housing, pneumatically activated, open without current Inspection nozzle Safety valve Full level switch with clamp connection Measuring pipe for vertical or horizontal mounting, integrated in the installation of the sender or separate Pressure sensor Aeration stick as a discharge aid made of porous sintered stainless steel Complete pneumatic installation, for automatic operation, with -approved EMSR-technic Outlet cone with bend and plain connection piece Pressure Vessel, category IV module G, calculated, designed and manufactured according to AD 2000 regulations Support, made of tubular construction with stand plates as a three point support plate made of stainless steel, fine glass blasted This is not an equipment according ATEX-directive 2014/34/EU, but in contact with product (inside) usable in the zones Additional electrical parts must be approved for the chosen ATEX-zone. Surface treatment: Surface treatment of the stainless steel parts: Pickled or brushed and passivated Surface treatment for carbon steel parts: Chemical stripped, Primer 40 µm zinc phosphate, Top coat 40 µm 2-component polyurethane, RAL5012 blue Seite 3 von 9

4 Details material inlet: Datasheet Compensator Disc valve, easy to dismantle. See separate datasheet. Sealing pressed on Pneumatic sealing released Centering flange Seite 4 von 9

5 Electric parts and sensors: Denomination Manufacturer Type Pneumatic Installation PIP001 2/2-way-solenoid valve Norgren Pressure vessel PIP002 full level switch Endress+Hauser FTM51 PIP003 pressure sensor IFM PG2894 Butterfly valve PIP004 Inductive initiators IFM IN5225 PIP005 Namur-solenoid valve actuator Norgren PIP006 solenoid valve inflatable sealing Norgren PIP007 pressure switch inflatable sealing Wika PSM02 Deaeration unit PIP008 Namur- solenoid valve ball valve Norgren PIP009 Inductive initiators ball valve IFM IN5225 Opt 11: Sensor system for measuring of flow capacity, temperature, humidity and pressure FIR Flow capacity measuring station Kunst DS400 PIR Pressure sensor Kunst CS16 MIR Dew point sensor Kunst FA410 Opt. 13, 14 & 15: Vibro-sender, sender scale and vibro-sender scale Vibration motor series 05 und 07 OLI MVE200/15; 160W PIP010 Vibration motor series 10 OLI MVE700/15; 620W Vibration motor series 13 OLI MVE1100/15; 650W PIP011 3 Load cells series 05 und 07 Utillcell 350i 300kg 3 Load cells series 10 Utillcell 350i 500kg 3 Load cells series 13 Utillcell 350i 750kg PIP012 Namur- solenoid valve exit valve Norgren PIP013 Inductive initiators IFM IN5225 Seite 5 von 9

6 Options: 1. Parts in contact with product made of (DIN) / 316L (AISI) 2. Parts in contact with product made of (DIN) / 316Ti (AISI) 3. Product temperature max.: 120 C 4. Electrical components outside for zone 2/22 5. Electrical components outside for zone 1/21 6. Pneumatic installation in cabinet 7. Wiring of the electrical equipment and measuring points on the cabinet 8. Moving device 9. Support, made of tubular construction with stand plates as a three point support plate made of carbon steel with coating suitable for food 10. Pneumatic installation with fittings made of stainless steel, valves according manufacturer standard made of brass/zinc cast 11. Other outlet diameter Ø65, 80, 100, 125, Sensor system for measuring of compressed air flow, temperature, humidity and pressure incl. reader unit for registration and signal processing via ethernet IP (Cloud) according to industry 4.0 Seite 6 von 9

7 13. Control Operation panel with micro-spscontrol and display for controlling the sender. The control can communicate by ethernet/profinet with a superordinate control Functions like option 13.1, additional dosing processor 14. Vibro-sender type PIV- Hygienic-Dry for mass flow, cohesive up to non flowing products Elastic connection Elastic hanger Conveying tube for vibration decoupling, elastic Support as a pipe construction with ground plates made of stainless steel, fine glass blasted Oscillation drive with vibrating motor 230/400V IP65 Seite 7 von 9

8 15. Sender-scale type PIS- Hygienic-Dry, all connections of the conveyor (bulk solids, pneumatic, electrical) are optimized, without secondary paths of force Inlet nozzle with centering Weighing decoupling Weighing modules, accuracy class C3, consisting of load cell, force transmission parts and mounting parts Stable weighing frame stainless steel, fine glass blasted, made of profile pipe to accommodate 3 weighing modules Outlet cone Exit valve Conveying tube for weighing decoupling Seite 8 von 9

9 16. Vibro-sender-scale type PIVS-Hygienic-Dry Inlet nozzle with centering Weighing decoupling Stable weighing frame stainless steel fine glass blasted, made of profile pipe to accommodate 3 weighing modules Weighing modules, accuracy class C3, consisting of load cell, force transmission parts and mounting parts Oscillation drive with vibrating motor 230/400V IP65 Outlet cone Exit valve Conveying tube for weighing decoupling Related documents: 3D-Part: Type.step (example: PIP01207YD01. Step) 2D-planning drawing: Type.dxf (example: PIP01207YD01. dxf) Selection criteria: SG-Sender Pricelist: PL-PIP- Hygienic-Dry Drawing numbers list: Draw-No-List_ Seite 9 von 9