Presented By. NicolScales.com Contact Us
|
|
|
- Silvester O’Brien’
- 5 years ago
- Views:
Transcription
1 Presented By Dallas Ft Worth Austin Houston NicolScales.com Contact Us Nicol Scales & Measurement is an ISO Accredited Calibration Company that has provided calibration, repair and sales of all types of weighing and measurement products since 1931.
2 Load cell PR 6241 and mounting kits PR 6041/PR 6043/PR 6044 For the precise weighing of process vessels The PR 6241 series compression S-type load cells are specially designed for weighing small and medium process vessels and for high-precision dosing. The PR 6241 is produced entirely from stainless steel. A special design feature is the combination of real shearing force principle and pendulum support principle for the utmost precision. The right solution for all of these applications: Weighing Filling and dosing Fill quantity control
3 Technical specifications Load cell PR 6241 Parameter Description Abbr. D1 C3 C6 Unit Accuracy class %E max Minimum dead load Lowest limit of specified measuring range E min %E max Maximum capacity Highest limit of specified measuring range E max See Ordering information table kg Safe load limit Maximum load without irreversible damage E lim %E max Destructive load Danger of mechanical destruction E d > 300 > 300 > 300 %E max Minimum load cell verification interval (OIML) For NTEP, see separate table Minimum load cell verification interval, v min = E max /Y Y 5,000 14,000 20,000 Deadload output return Factor for deadload output return after load Z 1,000 3,000 8,000 (DR=1/2*E max /Z) Rated output Relative output at maximum capacity C n mv/v Tolerance on rated output Permissible deviation from rated output d c <0.25 <0.07 <0.07 %C n Zero output signal Load cell output signal under unloaded condition S min <1.0 <1.0 <1.0 %C n Reproducibility Creep Max. change in load cell output for repeated loading Max. change of output signal at E max for 30 min. e R <0.01 <0.005 <0.005 %C n d cr <0.03 <0.015 <0.008 %C n Non-linearity Max. deviation from best straight line through zero d Lin <0.03 <0.01 <0.01 %C n Hysteresis Max. difference in LC output between d hy <0.04 <0.015 <0.008 %C n loading and unloading Temperature effect on S min Max. change of S min in B T TK Smin <0.028 <0.01 <0.007 %C n /10 K Temperature effect on C Max. change of C in B T TK C <0.03 <0.01 <0.005 %C n /10 K Input impedance Between supply terminals R LC 650 ± ± ± 6 Ω Output impedance Between measuring terminals R O 610 ± ± ± 0.5 Ω Insulation impedance Between measuring circuit and housing at 100 V DC R IS > 5, > 5, > 5, Ω Insulation voltage Between circuit and housing (PR 6241/..E only) V Recommended supply voltage To hold the specified performance B u V Max. supply voltage Permissible for continuous operation without damage U max 28/(EX versions: 25) V Nominal ambient temp. range To hold the specified performance B T C Usable ambient temp. range Permissible for continuous operation without damage B Tu C Storage temperature range Without electrical and mechanical stress B Ti C Permissible eccentricity Permissible displacement from nominal load line S ex mm Vibration resistance Resistance against oscillations (IEC Fc) 20 g, 100 h, Hz Barometric pressure influence Influence of barometric pressure on output PK Smin <0.005 < < %C n /kpa Nominal deflection Max. elastic deformation under maximum capacity S nom < 0.3 for E max < 5 t/< 0.5 for E max = 5 t mm Material (sensor) Stainless steel Protection class Cable Bending radius IP68/IP69 Length: 5 m Diameter: 5 mm Cross section: mm 2 Material cable sheath: TPE 25 mm at fixed installation 75 mm at flexible installation
4 NTEP classification PR 6241 NTEP NTEP minimum load cell verification interval, v min Maximum capacity with OIML class divisions n max 100 kg 200 kg 300 kg 500 kg 1 t 2 t 3 t 5 t Unit Class III Multiple D1 2, ,000 g Class III Multiple C3 5, g Class III Multiple C6 8, g Class IIIL Multiple D1 5, g Class IIIL Multiple C3 10, g Class IIIL Multiple C6 10, g Mounting kits PR 6041/PR 6043/PR 6044 Maximum capacity of load cell PR 6241 Mounting kit/ accessories Material Description/comments Mounting screws Installation height (mm) Max. permissible horizontal force (kn) Max. permissible lift-off force [kn] Max. permissible vertical load without load cell 100 kg 500 kg 100 kg 2 t 3 t 5 t PR 6041/04N Elastomeric bearing M12 53 / / / PR 6041/30N PR 6041/30S PR 6043/30N PR 6043/30S Electrogalvanised steel S235, passivated and sealed Stainless steel (AISI 304) Electrogalvanised steel S235, passivated and sealed Plate mounting kit M8-5.8 / / / Plate mounting kit M8-A2-70 / / / MiniFLEXLOCK M / 2 t MiniFLEXLOCK M8-A / 2 t PR 6044/00S Plate mounting kit M8-A2-70 / 10 2 t PR 6044/10S Stainless steel (AISI 304) MaxiFLEXLOCK M8-A t PR 6041/51S Platform base / 44 / / / PR 6043/31S Load disc kit / / / / / PR 6041/40N PR 6041/40S PR 6043/40N Electrogalvanised steel S235, passivated and sealed Stainless steel (AISI 304) Electrogalvanised steel S235, passivated and sealed Plate mounting kit M / / / Plate mounting kit M12-A2-70 / / / MiniFLEXLOCK M / 5 t PR 6043/40S MiniFLEXLOCK M12-A / 5 t PR 6044/01S Stainless steel (AISI 304) Plate mounting kit M12-A2-70 / 20 5 t PR 6044/11S MaxiFLEXLOCK M12-A t
5 Technical diagrams Compression S-type load cell PR 6241 Model A [mm] B [mm] C [mm] D [mm] E [mm] PR 6241/ M12 PR 6241/ M12 PR 6241/ M PR 6241/ M Mounting kits PR 6041/PR 6043/PR 6044 Elastomeric bearing PR 6041/04N All dimensions in mm
6 A A (4x) Plate mounting kit PR 6041/30N+S A A (8x) Plate mounting kit PR 6041/40N+S Platform base PR 6041/51 MiniFLEXLOCK PR 6043/30N+S All dimensions in mm
7 Plate mounting kit PR 6044/00S MiniFLEXLOCK PR 6043/40N+S Plate mounting kit PR 6044/01S MaxiFLEXLOCK PR 6044/10S MaxiFLEXLOCK PR 6044/11S All dimensions in mm
8 Ex approval Scope of validity: PR 6241 (100 kg...5 t) Certificates for compression S-type load cell PR 6241 Zone Labelling Certificate number For 0 and 1 II 1G Ex ia IIC T6 Ga Ex ia IIC T6 Ga 20 and 21 II 1D Ex ta IIIC T160 C Da Ex ta IIIC T160 C Da BVS 16 ATEX E 005 IECEx BVS TÜV 03 ATEX 2301X IECEx TUN X PR 6241/..E only all PR 6241 without /..E 2 II 3G Ex na IIC T6 Gc Manufacturer s declaration all PR 6241 without /..E 22 II 3D Ex tc IIIC T85 C Dc Manufacturer s declaration all PR 6241 without /..E FMus IS CL I, II, III, DIV 1, GP A, B, C, D, E, F, G Entity NI CL I, II, III, DIV 2, GP A, B, C, D, E, F, G NIFW T4A Ta= -30 C to 70 C; T5 Ta= -30 C to 55 C FMca IS CL I, II, III, DIV 1, GP A, B, C, D, E, F, G Entity NI CL I, II, III, DIV 2, GP A, B, C, D, E, F, G NIFW T4A Ta= -30 C to 70 C; T5 Ta= -30 C to 55 C FM17USO276 FM17CA0138 all PR 6241 without /..E all PR 6241 without /..E Ordering information Compression S-type load cells OIML R60, accuracy class D1 = 0.04% PR 6241/12D1 100 kg PR 6241/22D1 200 kg PR 6241/32D1 300 kg PR 6241/52D1 500 kg PR 6241/13D1 1 t PR 6241/23D1 2 t PR 6241/33D1 3 t PR 6241/53D1 5 t Compression S-type load cells OIML R60, accuracy class D1 = 0.04%, ex-version PR 6241/12D1E 100 kg PR 6241/22D1E 200 kg PR 6241/32D1E 300 kg PR 6241/52D1E 500 kg PR 6241/13D1E 1 t PR 6241/23D1E 2 t PR 6241/33D1E 3 t PR 6241/53D1E 5 t Precision compression S-type load cells OIML R60, accuracy class C3 = 0.015% PR 6241/22C3 200 kg PR 6241/32C3 300 kg PR 6241/52C3 500 kg PR 6241/13C3 1 t PR 6241/23C3 2 t PR 6241/33C3 3 t PR 6241/53C3 5 t Precision compression S-type load cells OIML R60, accuracy class C3 = 0.015%, ex-version PR 6241/22C3E 200 kg PR 6241/32C3E 300 kg PR 6241/52C3E 500 kg PR 6241/13C3E 1 t PR 6241/23C3E 2 t PR 6241/33C3E 3 t PR 6241/53C3E 5 t
9 Precision compression S-type load cells OIML R60, accuracy class C6 = 0.008% PR 6241/22C6 200 kg PR 6241/32C6 300 kg PR 6241/52C6 500 kg PR 6241/13C6 1 t PR 6241/23C6 2 t PR 6241/33C6 3 t Precision compression S-type load cells OIML R60, accuracy class C6 = 0.008%, ex-version PR 6241/22C6E 200 kg PR 6241/32C6E 300 kg PR 6241/52C6E 500 kg PR 6241/13C6E 1 t PR 6241/23C6E 2 t PR 6241/33C6E 3 t Mounting kits PR 6041 without constrainer Mounting kits PR 6043 MiniFLEXLOCK with integrated constrainer Type Order number Type Order number PR 6041/04N PR 6041/30N PR 6041/30S PR 6041/40N PR 6041/40S PR 6041/51S PR 6043/30N PR 6043/30S PR 6043/40N PR 6043/40S Mounting kits PR 6044 MaxiFLEXLOCK with additional functions Mounting kits PR 6043 load discs Type Order number Type Order number PR 6044/00S PR 6044/10S PR 6044/01S PR 6044/11S PR 6043/31S The products and solutions presented in this data sheet make major contributions in the following sectors: Food and beverages Pharmaceutical Chemistry Cosmetics Machinery (OEM) The technical data given serves as a product description only and should not be understood as guaranteed properties in the legal sense. Specifications subject to change without notice. Rev. 08/2018 Minebea Intec GmbH Meiendorfer Straße 205 A Hamburg, Germany Phone sales.hh@minebea-intec.com
Compression load cell Inteco, converter Connexx, mounting kits PR 6001, PR 614x
Compression load cell Inteco, converter Connexx, mounting kits PR 6001, PR 614x The versatile, innovative weighing solution for silo and vessel weighing The load cell Inteco represents a consistent enhancement
Load cell PR for maximum corrosion resistance. Load cell PR 6212 benefits. Mounting kit PR 6012 benefits
Load cell PR 6212 for maximum corrosion resistance Load cell PR 6212 benefits Maximum corrosion resistance High-temperature version available for up to 180 C Easy and failure-free installation using the
HLC A1... HLC B1... HLC F1...
HLC A1... HLC B1... HLC F1... Load Cells Data sheet Special Features Hermetically encapsulated (IP68) Maximum capacities: 110 kg... 10 t Rust-resistant materials Low height of construction Meets EMC requirements
Load cells. Data sheet. Special features. Cable assignment (six wire configuration)
HLC A1 HLC B1 HLC F1 Load cells Special features - Hermetically encapsulated (IP68) - Maximum capacities: 110 kg... 10 t - Rust resistant materials - Low height of construction - Meets EMC requirements
HLC A1... HLC B1... HLC F1...
HLC A1... HLC B1... HLC F1... Load cells Data Sheet Special features -- Hermetically sealed (IP68) -- Max. capacities: 220 kg... 10 t -- Stainless steel -- Low overall height -- Meets EMC/ESD requirements
0745A Load Cell. Global Usage Fully Approved for Accuracy and Safety. 0745A Beam Load Cell Fully Approved
0745A Load Cell Global Usage Fully Approved for Accuracy and Safety Floor Scales Use the 0745A load cell in platform and floor scales. Due to the hermetic welded design the 0745A is ideal for harsh environments
Load Cells Bending beam load cells SIWAREX WL230 BB-S SA
Siemens AG 2018 Load Cells Load cell Measurement characteristic values Rated measuring path h n at E max 0. mm (0.01 in) Rated characteristic value C n 2.0 ± 0.02% mv/v Tolerance D O of zero signal < ±
Load Cells SIWAREX WL230 BB-S SA
Load cell The bending beam load cell is particularly suitable for use in small-scale container and platform scales. The measuring element is a double bending beam made of stainless steel to which 4 strain
SLB415 Load Cell. Global Usage No Compromise on Performance. SLB415 Beam Load Cells Cost Efficient Solution
SLB415 Load Cell Global Usage No Compromise on Performance Floor Scales Use the SLB415 load cell in platform and floor scales. Due to the hermetic welded design reliability in most industrial environments
PW29... Data Sheet. Single point load cell. Special Features. Optional: Dimensions (in mm; 1 mm = inches) B en
PW29... Single point load cell Special Features Hermetically encapsulated (IP68; IP69K) - Accuracy class C3MR - OIML R60 test report - Maximum capacities 100 kg 1000 kg - Platform sizes 800 x 800Κmm -
SWC515 PinMount. Right the First Time Safe, Accurate, Service Friendly. SWC515 PinMount. Right the First Time
SWC515 PinMount Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWC515 PinMount weigh modules offer rugged construction and many features for easy installation and accurate and reliable
Load Cell A special beam load cell has been developed by METTLER TOLEDO to meet hygienic criteria. Self draining and a mirror polish make it unique.
SWB805 MultiMount Hygienic Weigh Module Contamination-free with certified equipment Hygienic Design The SWB805 is NSF and GMP approved assuring compliance in food and pharmaceutical applications. The design
SWB505 MultiMount EN1090
SWB505 MultiMount EN90 Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount weigh modules offer rugged construction and many features for easy installation and accurate
SWB505 MultiMount. SWB605 PowerMount. Right the First Time Safe, Accurate, Service Friendly. Right the First Time
SWB505 MultiMount SWB605 PowerMount Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount / SWB605 PowerMount weigh modules offer rugged construction and many features for
Compact. range of Weighing Assemblies.
APPLIED WEIGHING INTERNATIONAL Compact range of Assemblies. upto IP68 Features 20kg to 2,000kg capacities. For platform, hoppers, tanks and Silo weighing. Robust hygenic design for harsh industrial applications.
SLB515 Load Cell. Global Usage Fully Approved for Accuracy and Safety. SLB515 Beam Load Cell Fully Approved
SLB515 Load Cell Global Usage Fully pproved for ccuracy and Safety Floor Scales Use the SLB515 load cell in platform and floor scales. Due to the hermetic welded design the SLB515 is ideal for harsh environments
Metal Detector Secus. Benefits
Metal Detector Secus Benefits Frequency range 5 50 khz Highly developed electronics to compensate for the product effect 5.7-inch color touch screen display Robust design asy integration into existing
Bench and floor scale Midrics
Bench and floor scale Midrics The robust complete scale for reliable quality control The bench and floor scale Midrics has proven itself in a variety of industries such as the food, pharmaceutical, chemical,
Superior Accuracy. Control Your Process Anytime SLB615D POWERCELL. Know What s Ahead. Superior Accuracy
SLB615D POWERCELL Superior Accuracy Control Your Process Anytime Superior Accuracy SLB615D POWERCELL provides extremely high accuracy up to OIML C10 which is three times better than usual. The internal
Thermocouple For additional thermowell Model TC10-B
Temperature Thermocouple For additional thermowell Model TC10-B WIKA data sheet TE 65.02 for further approvals see page 2 Applications Machine building, plant and vessel construction Energy and power plant
SWB505 MultiMount. Right the First Time Safe, Accurate, Service Friendly. Right the First Time
SWB505 MultiMount Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount weigh modules offer rugged construction and many features for easy installation and accurate and
Surface thermocouple Model TC50
Temperature Surface thermocouple Model TC50 WIKA data sheet TE 65.50 for further approvals see page 2 Applications To measure surface temperatures on flat surfaces or pipes, in both laboratory and industrial
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter Application Used to convert a direct-current input signal into a pneumatic output signal for measuring and control
HI LPRC03 Advantage Hermetic Rocker Load Points
HI LPRC03 Advantage Hermetic Rocker Load Points HI LPRC03 Load Points with HI RCH03 and HI RCH04 Sensors HI LPRC03 ADVANTAGE low profile, rocker load point systems are specially designed for high capacity
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40
DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
Series 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-1 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
Type Electronic Limit Switch
Type 3738-20 Electronic Limit Switch With optional solenoid valve Application Electronic limit switch for on/off applications to indicate the end position. Optionally with integrated solenoid valve. Special
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
Thermocouple Without thermowell Model TC10-H
Temperature Thermocouple Without thermowell Model TC10-H WIKA data sheet TE 65.08 for further approvals see page 2 Applications For direct installation into the process Machine building Motors Bearing
Terminal Boxes in Stainless Steel SLS**.T
Features Variant options Stainless steel enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 6 enclosure size options Various terminal and cable gland configurations
Siemens AG kg ( lb) 130 kg ( lb) 280 kg ( lb)
Load ells SIWREX WL280 RN-S S Siemens G 18 Overview Design The measurement element is a ring torsion spring made of stainless steel. Two strain-gage spirals (DMS) are applied to the upper and lower faces
ABB MEASUREMENT & ANALYTICS DATA SHEET. TEIP11 I/P signal converter for standard signals
ABB MEASUREMENT & ANALYTICS DATA SHEET TEIP11 I/P signal converter for standard signals 2 TEIP11 I/P SIGNAL CONVERTER FOR STANDARD SIGNALS DS/TEIP11-EN REV. D Flow in air pressure Proven and reliable concept
Electropneumatic Converters i/p Converters Type 6111 Mounting and Operating Instructions EB 6111 EN
Electropneumatic Converters i/p Converters Type 6111 Fig. 1 Type 6111 in standard version Fig. Type 6111 mounted on a supply air manifold Fig. 3 Type 6111 in field enclosure Mounting and Operating Instructions
Linear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
Diaphragm pressure gauge, flush For sanitary applications Model PG43SA-S, NS 100
Pressure Diaphragm pressure gauge, flush For sanitary applications Model PG43SA-S, NS 100 WIKA data sheet PM 04.16 Applications for further approvals see page 10 Hygienic pressure measurement in sanitary
DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
Product specification
Product specification Measuring range of 4 mm Features Non-contacting displacement measurement based on the eddy-current principle System length: 5 m or 10 m with ATEX approval Temperature range: -50 C
Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage
Data Sheet Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use Compact
OPTIMASS 3000 Technical Datasheet
OPTIMASS 3000 Technical Datasheet Sensor for mass flow First choice for low flow applications Certified secondary pressure containment A common footprint for all three sizes, in Hastelloy or Stainless
Automated Precision Weighing
Automated Precision Weighing Designed for Automation in Hazardous Environment, Zone 2 High Precision Designed to meet the most demanding customer specifications. The WMS is a high speed high accuracy weigh
KM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, 5kN
KM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, Description The load cell KM26z is a membrane-type force sensor with small dimensions. It is suitable for measuring compressive and tensile forces. For force
kyalfa Laval Weighing Systems UltraPure with digital beam load cell
. kyalfa Laval Weighing Systems UltraPure with digital beam load cell Reliable and accurate digital beam load cells for process weighing Application The Alfa Laval digital beam load cells offer reliable
Product specification
Product specification 4 mm Measuring Range Features Non-contacting displacement measurement based on the eddy-current principle System length: 5 m or 10 m with ATE approval Temperature range displacement
DL 01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
DL 0 Battery Powered for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless
Load Cells SIWAREX WL280 RN-S SA
Siemens G 2015 SIWREX WL280 RN-S S Load cell Overview Design The measurement element is a ring torsion spring made of stainless steel. Two strain-gage spirals (DMS) are applied to the upper and lower faces
ATEX LABELLING FOR MOTORS AND GEAR UNITS
ATEX LABELLING FOR MOTORS AND GEAR UNITS EN ATEX INFORMATION GAS AND DUST COMPLETE DRIVE SOLUTIONS FROM A SINGLE SOURCE RELIABLE n Reliable products n Coordinated components n NORD's own development and
Data Sheet DS/NGB-EN Rev. B. Multi barriers. Measurement made easy. Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1
Data Sheet DS/NGB-EN Rev. B Multi barriers Measurement made easy Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1 Change from two to one column Multi barriers Change from one to two columns
Cable thermocouple Model TC40
Temperature Cable thermocouple Model TC40 WIKA data sheet TE 65.40 for further approvals see page 2 Applications For direct installation into the process Machine building Motors Bearing Pipelines and vessels
T95 Load Cell Assembly for Silo, Tank & Vessel Weighing and Axle Weighing
T95 Load Cell Assembly for Silo, Tank & Vessel Weighing and Axle Weighing Capacities 2t to 20t Stainless Steel Load Sensor OIML C3 approved Integrated Lift Off Prevention Load cell is always in Tension
E II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc
![E II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc](/thumbs/74/70015027.jpg "E II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc")
900/77-80-094-001 158877 For the intrinsically safe operation of a wide range of devices, such as HART transmitters, solenoid valves, sensors, zero-potential contacts and many more compact, space-saving
Technical Data. Dimensions
Model Number Features 40 mm flush 4-wire DC ATEX-approval for zone 2 and zone 22 S Technical Data specifications Switching element function PNP NO/NC Rated operating distance s n 40 mm Installation flush
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. 9QGPS5190 Trough hole (annular) heavy capacity load cell
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET 9QGPS5190 Trough hole (annular) heavy capacity load cell 2 Measurement made easy Annular compression load cell. Low profile for high capacity load cells
Type Z & Ex pz purge and pressurization system
Type Z & Ex pz purge and pressurization system Features 100% automatic purge and pressurization system including purging, temperature and leakage control, alarming and system power Third party approvals
Product specification
Product specification Features Non-contacting displacement measurement based on the eddy-current principle System length: 5 m or 10 m with ATE approval Temperature range displacement sensor: -55 C +180
FICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
DMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP
OPTIMASS 2000 Technical Datasheet
OPTIMASS 2000 Technical Datasheet Sensor for bulk mass flow Large diameter for bulk measurement and custody transfer of liquids and gases Stainless Steel measuring tubes (NACE Compliant) Modular electronics
Thermocouple For additional thermowell, flameproof enclosure (Ex d) Model TC10-L
Temperature Thermocouple For additional thermowell, flameproof enclosure (Ex d) Model TC10-L WIKA data sheet TE 65.12 for further approvals see page 2 Applications Chemical industry Petrochemical industry
LMK 387. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO
LMK 87 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... mho up to 0... 00 mho Output signal -wire: 4... 0 ma Special
Freefall metal detection system Vistus with separator FL
Freefall metal detection system Vistus with separator FL The space-saving model Separator FL benefits For maximum space-saving: the low installation height allows for especially short complete systems
Micro Motion ELITE High Capacity Coriolis Flow and Density Meters
Product Data Sheet PS-001041, Rev. F February 2010 Micro Motion ELITE High Capacity Coriolis Flow and Density Meters Micro Motion ELITE High Capacity Coriolis meters offer unparalleled flow and density
Compact temperature switch Model TCS
Mechatronic temperature measurement Compact temperature switch Model TCS WIKA data sheet TV 31.64 Process Compact Series Applications Temperature monitoring and control of processes Safety-critical applications
fsens Force Measurement
Mobile Machine Control Solutions fsens Force Measurement Reliable Accurate Safe Strong and Accurate fsens. Force Sensors from Hirschmann MCS Benefits of the fsens Series: Reliable and exact measurement
DMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet
KD45 ±20N. Description
KD45 ±20N The force sensor KD45 has the geometry of a miniature load cell. It is fastened on one side using the through holes ø3.2. There is a thread M3 for force transmission. Force transmission is displaced
Differential pressure transmitter PASCAL Ci4 Delta P
Differential pressure transmitter PASCAL Ci4 Delta P for general application, Type Series CI4300 Features Differential pressure transmitter with metallic diaphragm High-resolution graphic display with
RHM30. Coriolis Mass Flow Meter for Plant and Loading Flows. Features. Applications. Benefits
RHM30 Coriolis Mass Flow Meter for Plant and Loading Flows Features Standard pressure ratings up to 798 bar (11574 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down
XMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
Mini temperature switch Stainless steel switch enclosure Model TXS
Mechatronic temperature measurement Mini temperature switch Stainless steel switch enclosure Model TXS WIKA data sheet TV 31.70 Process Mini Series Applications Temperature monitoring and control of processes
CB50X & CB50X-DL load cells Influence factors in weighbridge application
CB50X & CB50X-DL load cells Influence factors in weighbridge application Introduction Vehicle scales can be considered as a platform that is supported by weight-sensing elements which produce an output
Micro Motion ELITE High Capacity Coriolis Flow and Density Meters
Product Data Sheet PS-001041, Rev. L April 2013 Micro Motion ELITE High Capacity Coriolis Flow and Density Meters Micro Motion ELITE High Capacity Coriolis meters offer unparalleled flow and density measurement
IECEx Certificate of Conformity
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable
L(+) SV1 N(-) NC. Terminal Block Connections L (+) N (-) SV1 K2 K1. Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Type Z & Ex pz purge and pressurization system Features 100% automatic purge and pressurization system including purging, temperature and leakage control, alarming and system power Third party approvals
Resistance thermometer Without thermowell Model TR10-H
Temperature Resistance thermometer Without thermowell Model TR10-H WIKA data sheet TE 60.08 for further approvals see page 2 Applications For direct installation into the process Machine building Motors
EE300Ex-HT. Humidity/Temperature Transmitter for Intrinsically Safe Applications. Typical Applications. Features. Display
EE300ExHT Humidity/Temperature Transmitter for Intrinsically Safe Applications The EE300Ex humidity / temperature transmitter has been designed specifically for measurement in explosion hazard areas. It
SERIES 54 Inductive Proximity Sensor
SENSOR FEATURES > 2-wire DC sensor with minimum off-state current > ATEX-approval for zone 2 and zone 22 > High temp, UV, salt water resistant > Rugged metal base > IP66/67/69K > High impact protection
The platform is placed on the weighing platform using three or four height-adjustable elastomer bearings (EL 120), in order to avoid twisting.
LCS130 2t Description The load cell LCS130 is used in platform-type weighing scales. Three to four load cells support a platform of any size. The output current calibration allows parallel connection of
Resistance thermometer For additional thermowell, flameproof enclosure (Ex d) Model TR10-L
Temperature Resistance thermometer For additional thermowell, flameproof enclosure (Ex d) Model TR10-L WIKA data sheet TE 60.12 for further approvals see page 2 Applications Chemical industry Petrochemical
Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam
Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam Metallic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in
Absolute pressure gauge with diaphragm
Absolute pressure gauge with diaphragm and switch function,type series BF2 Features Absolute pressure gauge with diaphragm and switch function Nominal ranges 0 60 mbar abs to 0 2500 mbar abs With integrated
Resistance thermometer For sanitary applications, exchangeable sensor Model TR22-A
Temperature Resistance thermometer For sanitary applications, exchangeable sensor Model TR22-A WIKA data sheet TE 60.22 for further approvals see page 15 Applications Sanitary applications Food and beverage
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 4 2 5 4 2 5 4 2 5 4 2 5 5/2 Series 55 FEATURES The monostable spool valves have TÜV certified
Freefall metal detection system Vistus with separator EC
Freefall metal detection system Vistus with separator EC The hygienic model with easy-clean design Separator EC benefits Optimised for the food industry: The easy-clean design allows for tool-free disassembly
RC3. LOADCELLS. Technical specification. FLINTAB is exclusive importer in Romania of FLINTEC Germany products.
LOADCELLS The FLINTAB Sweden loadcells innovation reorganised then by FLINTEC Germany is legendary, their design gaining the first place in the world and spectacular patents. Their pioneering force and
RHM40. Coriolis Mass Flow Meter for Demanding Applications. Features. Applications. Benefits
RHM40 Coriolis Mass Flow Meter for Demanding Applications Features Standard pressure ratings up to 433 bar (6280 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down to
Differential pressure gauge with output signal With integrated working pressure indication (DELTA-trans) Model DPGT40
Mechatronic pressure measurement Differential pressure gauge with output signal With integrated working pressure indication (DELTA-trans) Model DPGT40 WIKA data sheet PV 17.19 Applications weitere Zulassungen
IECEx Certificate of Conformity
IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2012-06-12 Issue No.: 3 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Germany Manufacturing
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 NC 0 0 / Series 55 FEATURES The monostable spool valves have TÜV certified IEC 6508
Micro Motion ELITE Coriolis Flow and Density Meters
Micro Motion ELITE Coriolis Flow and Density Meters Product Data Sheet PS-00374, Rev V April 2013 Ultimate real world performance Unchallengeable ELITE performance on liquid mass flow, volume flow, and
Pressure transmitter for marine applications MBS 3100 and MBS 3150
Data sheet Pressure transmitter for marine applications MBS 3100 and MBS 3150 The compact ship approved pressure transmitters MBS 3100 and MBS 3150 are designed for use in almost all marine applications.
PIN LOAD CELL TYPE PR
Applications: The pin type load cell model PR is mainly foreseen for applications on cranes weighing systems or, in general, where the load applied on a pin have to be measured. Some applications are:
Belt Scales Milltronics Belt Scales
Belt Scales Siemens AG 2013 Overview Milltronics MSI is a heavy-duty, high accuracy full-frame single idler belt scale used for process and load-out control. Idler not included with belt scale. Benefits
Freefall metal detection system Vistus with separator ST 2.0
Freefall metal detection system Vistus with separator ST 2.0 Reliable metal detection ensuring optimum product quality Separator ST 2.0 benefits Dust-proof design for minimal product loss and increased
L(+) SV1 N(-) NC. Terminal Block Connections L (+) N (-) SV1 K2 K1. Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Type Z & Ex pz purge and pressurization system Features 100% automatic purge and pressurization system including purging, temperature and leakage control, alarming and system power Third party approvals
Differential pressure gauge Model , copper alloy Model , stainless steel version
Mechanical pressure measurement Differential pressure gauge Model 712.15.100, copper alloy Model 732.15.100, stainless steel version WIKA data sheet PM 07.29 Applications for further approvals see page