SWB505 MultiMount EN1090
|
|
- Lambert Richardson
- 6 years ago
- Views:
Transcription
1 SWB505 MultiMount EN90 Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount weigh modules offer rugged construction and many features for easy installation and accurate and reliable tank weighing. Standard lift-off bolt copes with tipping forces while vertical safety down-stop provides additional safety. Conveyors and Mixers Weigh modules are also designed for dynamic-loading applications such as conveyors, mixers and blenders. SWB505 MultiMount provides 360 checking for ease of installation and maximum safety. The rocker pin restores the top plate to its ideal position to maintain accurate, repeatable weight. Load Cell Load cells have a rocker pin design that automati cally aligns load forces for accurate weighing. These hermetically sealed load cells are rated IP68 and can be used in all environments. The load cells are easy to inspect or replace. Stabilizers Up to two optional stabilizers can be applied to each weigh module to stabilize a scale subject to heavy vibration, high torque, or in-motion weighing. With stabilizers installed, thermal expansion is still possible, guaranteeing the best weighing performance. SWB505 MultiMount SWB505 MultiMount TM EN90 Right the First Time SWB505 MultiMount features ensure correct scale system installation, right from the start. Weigh modules do not compromise on safety all safety features are built-in. The rocker pin design provides the highest level of weighing accuracy. Service features, including SafeLock provide easy and trouble free installation. Features: Integrated lift-off protection Vertical safety down-stop Full 360 integrated checking Ground strap welding protection SafeLock Weigh module locked for installation SafeLock Load cell protected for installation Dual stabilizer option All load cells with IP68 / IP69K and fully stainless steel Global approvals standard on each load cell OIML C3/NTEP or OIML C6/NTEP III M n: Zinc plated or stainless steel mounting hardware CalFree : Calibration without test weights EN90 conformity
2 SWB505 MultiMount EN90 Specifications Weigh Module Weigh Module Model No. unit of measure Specification SWB505 MultiMount EN90 Size 3 Rated Capacity Max. Rated Forces ) Max. Compressive Force, Rated Max. Horizontal Force, Rated longitudinal kg (lb, nominal) kn (lb) 5 () 0.05 () () 0. () 0 (44) 0. (44) () 0.5 () 0 (0) (0) 00 (440) (440) 300 (660) 3 (660) (50). (50) 0 (500). (500) 550 (50) 5.4 (50) kn (lb) 4.5 () 7.5 (685) Max. Uplift Force, Rated kn (lb) 5.5 (30) 6 (3600) Max. horizontal force (longitudinal) kn (lb).5 (675) 5 (0) per stabilizer option, Rated 7) ) 4) Max. Yield Forces Max. Compressiv Force, Yield Max. Horizontal Force, Yield longitudinal kn (lb) (6.5) 0.5 (33) (99) 0.74 (65).47 (330).94 (660) 4.4 (990).6 (375) 3. (750) 8. (875) kn (lb) 6.6 (480) 9.8 (00) Max. Uplift Force, Yield kn (lb) 7.7 (730) (4950) 3) 4) Max. Ultimate Forces Max. Compressiv Force, Ultimate 5) kn (lb) 65 (4600) 90 (0000) Max. Horizontal Force, Ultimate longitudinal kn (lb) 7 (3800) 4 (9400) Max. Uplift Force, Ultimate kn (lb) (4590) 50 (00) Restoring Force Max. top plate travel longitudinal 8) Weight (including load cell), nominal Material Finish EN90 approval %A.L./mm 7.4 (90) 4.4 () (../in) 6) ± mm (in).5 (0.) 3 (0.) kg (lb) 4 (8.8) 6.6 (4.5) carbon steel / 304 stainless steel / 36 stainless steel Zinc Plated / Electropolished / Electropolished Yes, execution class EXC 0 (500).8 (500) 6. (3750) (50) 7 (5.4) 4400 (000) 43. (000) 5 (3370). 7.4 (660) 50 (00) (4950) 34 (7640) 50 (33000) 48 (750) 55 (350) ) The weigh module is rated for these forces in normal operation, a Factor of Safety has been applied by Mettler Toledo. ) Warning: if loaded statically one time in excess of these forces, the weigh module may yield and need replacing. The Max. Yield Forces do not consider fatigue/cyclic loading and should be approached only in exceptional circumstances. 3) Warning: if loaded statically one time in excess of these forces, the weigh module may break with potential for serious injury and/or property damage. 4) Warning: apply a Factor of Safety appropriate to the application. 5) The top plate will travel downwards by 5 mm (0. inches) before the down-stop engages and this ultimate force can be developed. 6) % of Applied Load (A.L.) per mm (in) displacement of the top plate ( & longitudinal). 7) or per weigh module. Max permissible longitudinal force per stabilizer. 8) 0 with Stabilizer. 5.5 (40) 3.5 (0.4) 5.4 (34) METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07
3 SWB505 MultiMount EN90 Specifications Load Cell Load Cell unit of measure Specification 0.03% % C3 / III s n:3 / C3 / C C6 / III M n: Model No. MTB 0745A Rated Capacity (R.C.) Rated Output kg (lb, nominal) 5 () () 0 (44) 30 ± 0.% 50 () 0 (0) 00 (44) 300 (50) ± 0.%.000 ± 0.% 0 (500) 550 (50) 0 (500).940 ± 0.%.000 ± 0.% Combined Error 9) ) %R.C. C3: 0.08 / C6: C3: 0.08 / C6: 0.0 Temperature Effect on Temperature Range OIML / European Approval ) NTEP Approval ) ATEX Approval ) IECEx Approval ) Factory Mutual Approval ) Excitation Voltage Terminal Resistance Min. Dead load Output Sensitivity ) Compensated %R.C./ C (../ F) %A.L./ C (../ F) C3: 0.00 (0.0006) / C6: 0.00 (0.0006) C3: 0.00 (0.0006) / C6: (0.0003) (0.005) (0.0008) 00 C3: (0.0007) / C6: (0.0007) C3: 0.00 (0.0006) / C6: (0.0003) - ~ +40 (+4 ~ +4) - to +40 (+4 to +4) Operating C ( F) -40 ~ +65 (-40 ~ +50) -40 to +65 (-40 to +50) Safe Storage -40 ~ +80 (-40 ~ +76) -40 to +80 (-40 to +76) Class C3 C6 C3 / C6 nmax / / 6000 Y Class III S / III M C3 / C6 III M / III M nmax 3000 / / Vmin kg (lb) R.C./ (0.5) Rating II G Ex ib IIC T4 / II D ibd IP6X T35 C II 3 G Ex na II T4 / II 3 G Ex nl IIC T4 / II 3 D Ex td A IP6X T35 C II G Ex ia IIC T4 Gb / II D Ex ia IIIC T0 C Db II 3 G Ex ic IIC T4 Gc / II 3 G Ex na IIC T4 Gc / II 3 D Ex tc IIIC T0 C Dc Number IECEx DEK 6.003X IECEx DEK Rating Entity Parameters Rating, USA Rating, Canada Ex ib IIC T4 Gb / Ex ib IIIC T35 C Db / Ex ic IIC T4 Gc / Ex na IIC T4 Gc / Ex tc IIIC T35 C Dc Ui = 5V, li = 600mA, Pi =.5W, Ci = 0.nF/m, Li = µh/m / Un = 5V IS / I, II, III / / ABCDEFG / T4 NI / I / / ABCD / T6 / S / II, III / / FG / T (000) (.0) Ex ia IIC T4 Gb / Ex ia IIIC T0 C DbEx ic IIC T4 Gc / Ex na IIC T4 Gc / Ex tc IIIC T0 C Dc Ui = 5V, Ii = 600mA, Pi =.5W, Ci = 5nF, Li = 30µH / Un = 5V, Ci = 5 nf IS / I, II, III / / ABCDEFG / T4 NI / I / / ABCD / T6 / S / II, III / / FG / T6 IS / I, II, III / / ABCDEFG /T4 IS / I, II, III / / ABCDEFG /T4 NI / I / / ABCD / T6 / DIP / II, III / / FG / T6 NI / I / / ABCD / T6 / DIP / II, III / / FG / T6 Recommended 5~5 C3: 5~5 / C6: 5~ V AC/DC Max. 0 5 Excitation ± Ω Output 350 ± 350 ± Material Spring Element stainless steel stainless steel Protection Type welded welded IP Rating IP 68, IP69K IP 68, IP69K NEMA Rating NEMA 6/6P NEMA 6/6P Weight, nominal kg (lb) 0.6 (.3) 0.9 () Cable Length Lenght m (ft) 3 (9.8) / 5 (6.4).3 (.9) PU: (6.6), 3 (9.8), 5 (6.4), (3.8) / FEP: 3 (9.8), 5 (6.4), (3.8) Diameter mm (in) 5.8 (0.3) PU: 5. (0.) / FEP: 5.3 (0.) 9) Error due to the combined effect of non-linearity and hysteresis. ) Typical values only. The sum of errors due to Combined Error and Temperature Effect on Sensitivity comply with the requirements of OIML R60 and NIST HB44. ) See certificate for complete information. (4.4) 3 METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07
4 SWB505 MultiMount EN90 Weigh Module Dimensions mm [in] Size Capacity Locations and Dimensions D H H H H3 L L L L3 L4 L5 L6 W W W W3 W4 3 5 kg 300 kg ( lb 600 lb) kg. t (50 lb.5 klb). (0.44). t (5 klb) 4.4 t ( klb) 7.5 (0.69) 83 (3.3) 5. (4.4) 36.6 (5.38).7 9. (0.75) (0.3).7 9. (0.75) 4.0 (.6) 65 (6.5) 50.9 (.00) 77.9 (7.00) 5.3 (.0) 70.3 (.77) 35.0 (9.5) (4.0) 4.4 (4.50) (3.) 89.0 (3.5).6 (4.00) 45 (5.7) (7.5) (7.3) (4.0) 4.4 (4.50) 5.4 (4.0) 4.4 (4.50) (3.3) 89.0 (3.5).6 (4.00) 60.0 (.36) 66.6 (.6) 69.7 (.74) 9.7 (3.6) METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07 4
5 Order Information SWB505 MultiMount EN90 Weigh Module including Load Cell Order Information, Weigh Module Assembly Size Rated Capacity Description 3 5kg / lb Bolded entries are stocked Weigh Module Assembly Class / Description 0.05% Cable, Material /Lenght Material CS kg / lb C3 / III s n:3 / kg / 44lb C3 / III s n:3 / kg / 66lb C kg / lb 0kg / 0lb 00kg / 440lb 300kg / 66lb 5-300kg / -66lb kg / 50lb 0kg / 500lb 550kg /,50lb 0kg /,500lb 00kg / 5,000lb -00kg / 50-5,000lb 4400kg /,000lb 4400kg /,000lb Stabilizer C3 / III s n:3 / C PVC / 3 m (9.8ft) C3 / III s n:3 / C C3 / III s n:3 / C C3 / III s n:3 / C Dead Stand Shock/Vibration Pad Thermal Isolation Pad 80 C Thermal Isolation Pad 70 C Weigh Module Assembly Stabilizer 0.03% C3 / C6 / III M n: C3 / C6 / III M n: PU / 5 m (3.8ft) C3 / C6 / III M n: C3 / C6 / III M n: Dead Stand Shock/Vibration Pad Thermal Isolation Pad 80 C 660 Thermal Isolation Pad 70 C 6464 Weigh Module Assembly Stabilizer C3 / PU / m (3.8ft) C6 / III M n: PU / m (3.8ft) Dead Stand Shock/Vibration Pad Thermal Isolation Pad 80 C 66 Thermal Isolation Pad 70 C METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07
6 Order Information SWB505 MultiMount EN90 Weigh Module without Load Cell SafeLock allows to install weigh module hardware without load cell to avoid sensor damage Combine weigh module with special cable length and cable material Use weigh module with dummy load cell for level detection systems Order Information, Weigh Module Kit Size Rated Capacity 5kg / lb kg / lb 0kg / 44lb Material CS Class 0.05% PVC / 3 m (ft) PVC / 5 m (6.6ft) kg / 66lb C kg / lb 0kg / 0lb 00kg / 440lb 300kg / 66lb kg / 50lb 0kg / 500lb 550kg / 50lb 0kg / 500lb C C C C PU / m (6.6ft) PU / 3 m (ft) PU / 5 m (6.6ft) Suitable Load Cells Cable, Material / Length Dummy Load Cell PU / m (33ft) FEP / 3 m (ft) FEP / 5 m (6.6ft) FEP / m (33ft) 0.03% C3 / C6 / III M n: C3 / C6 / III M n: C3 / C6 / III M n: kg / 5000lb kg / 000lb C3 / C6 / III M n: C3 / C6 / III M n: Bolded entries are stocked METTLER TOLEDO Data Sheet SWB505 MultiMount EN90 /07 6
7 SWB505 MultiMount EN90 Cable Colour MTB Colour Function Green + Excitation Black Excitation White + Signal Red Signal Yellow + Sense Blue Sense Yellow (long) Shield SWB505 MultiMount EN90 Cable Colour 0745A Colour Green Black White Red Yellow Function + Excitation Excitation + Signal Signal Shield Full Connectivity METTLER TOLEDO supplies various data communication interfaces that enable our sensors and instruments to communicate with your PLC, MES, or ERP systems. Weighing Electronics METTLER TOLEDO offers a complete family of electronics from simple weighing to application solutions for filling, stock control, batching, formulation, counting, checkweighing. Our extensive service network is among the best in the world and ensures maximum availability and service life of your product. Mettler-Toledo GmbH Industrial Division CH-8606 Nänikon, Switzerland Tel For more information Local contact: Subject to technical changes /07 Mettler-Toledo GmbH MarCom Switzerland MTSI Document-No:
SWC515 PinMount. Right the First Time Safe, Accurate, Service Friendly. SWC515 PinMount. Right the First Time
SWC515 PinMount Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWC515 PinMount weigh modules offer rugged construction and many features for easy installation and accurate and reliable
More informationSWB505 MultiMount. Right the First Time Safe, Accurate, Service Friendly. Right the First Time
SWB505 MultiMount Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount weigh modules offer rugged construction and many features for easy installation and accurate and
More informationSWB505 MultiMount. SWB605 PowerMount. Right the First Time Safe, Accurate, Service Friendly. Right the First Time
SWB505 MultiMount SWB605 PowerMount Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount / SWB605 PowerMount weigh modules offer rugged construction and many features for
More informationLoad Cell A special beam load cell has been developed by METTLER TOLEDO to meet hygienic criteria. Self draining and a mirror polish make it unique.
SWB805 MultiMount Hygienic Weigh Module Contamination-free with certified equipment Hygienic Design The SWB805 is NSF and GMP approved assuring compliance in food and pharmaceutical applications. The design
More information0745A Load Cell. Global Usage Fully Approved for Accuracy and Safety. 0745A Beam Load Cell Fully Approved
0745A Load Cell Global Usage Fully Approved for Accuracy and Safety Floor Scales Use the 0745A load cell in platform and floor scales. Due to the hermetic welded design the 0745A is ideal for harsh environments
More informationSLB415 Load Cell. Global Usage No Compromise on Performance. SLB415 Beam Load Cells Cost Efficient Solution
SLB415 Load Cell Global Usage No Compromise on Performance Floor Scales Use the SLB415 load cell in platform and floor scales. Due to the hermetic welded design reliability in most industrial environments
More informationSLB515 Load Cell. Global Usage Fully Approved for Accuracy and Safety. SLB515 Beam Load Cell Fully Approved
SLB515 Load Cell Global Usage Fully pproved for ccuracy and Safety Floor Scales Use the SLB515 load cell in platform and floor scales. Due to the hermetic welded design the SLB515 is ideal for harsh environments
More informationSuperior Accuracy. Control Your Process Anytime SLB615D POWERCELL. Know What s Ahead. Superior Accuracy
SLB615D POWERCELL Superior Accuracy Control Your Process Anytime Superior Accuracy SLB615D POWERCELL provides extremely high accuracy up to OIML C10 which is three times better than usual. The internal
More informationEngineering Specifications
Engineering Specifications Centerlign Weigh Modules The portions of this specification that have been left blank ( ) should be filled with information about the specific application. Information for the
More informationHI LPRC03 Advantage Hermetic Rocker Load Points
HI LPRC03 Advantage Hermetic Rocker Load Points HI LPRC03 Load Points with HI RCH03 and HI RCH04 Sensors HI LPRC03 ADVANTAGE low profile, rocker load point systems are specially designed for high capacity
More informationLoad cell PR for maximum corrosion resistance. Load cell PR 6212 benefits. Mounting kit PR 6012 benefits
Load cell PR 6212 for maximum corrosion resistance Load cell PR 6212 benefits Maximum corrosion resistance High-temperature version available for up to 180 C Easy and failure-free installation using the
More informationLoad cells. Data sheet. Special features. Cable assignment (six wire configuration)
HLC A1 HLC B1 HLC F1 Load cells Special features - Hermetically encapsulated (IP68) - Maximum capacities: 110 kg... 10 t - Rust resistant materials - Low height of construction - Meets EMC requirements
More informationCompression load cell Inteco, converter Connexx, mounting kits PR 6001, PR 614x
Compression load cell Inteco, converter Connexx, mounting kits PR 6001, PR 614x The versatile, innovative weighing solution for silo and vessel weighing The load cell Inteco represents a consistent enhancement
More informationHLC A1... HLC B1... HLC F1...
HLC A1... HLC B1... HLC F1... Load Cells Data sheet Special Features Hermetically encapsulated (IP68) Maximum capacities: 110 kg... 10 t Rust-resistant materials Low height of construction Meets EMC requirements
More informationPresented By. NicolScales.com Contact Us
Presented By Dallas Ft Worth Austin Houston NicolScales.com 800.225.8181 Contact Us Nicol Scales & Measurement is an ISO Accredited Calibration Company that has provided calibration, repair and sales of
More informationAutomated Precision Weighing
Automated Precision Weighing Designed for Automation in Hazardous Environment, Zone 2 High Precision Designed to meet the most demanding customer specifications. The WMS is a high speed high accuracy weigh
More informationExceptional Accuracy and Durability for Tough Industrial Environments INDUSTRIAL FLOOR SCALES. VERTEX Industrial Floor Scales Heavy-Duty Design
VERTEX Industrial Floor Scales Heavy-Duty Design LOCATE HI-RES Exceptional Accuracy and Durability for Tough Industrial Environments INDUSTRIAL FLOOR SCALES METTLER TOLEDO VERTEX Floor Scales Heavy-Duty
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationWeigh modules Tank and hopper kits
Weigh modules Tank and hopper kits Section Contents Tank and Hopper Kits ITCM Isolated Tension Cell Modules... 24 ITCM SS Isolated Tension Cell Modules, Stainless Steel... 26 ITCM HE Isolated Tension Cell
More informationHLC A1... HLC B1... HLC F1...
HLC A1... HLC B1... HLC F1... Load cells Data Sheet Special features -- Hermetically sealed (IP68) -- Max. capacities: 220 kg... 10 t -- Stainless steel -- Low overall height -- Meets EMC/ESD requirements
More informationT95 Load Cell Assembly for Silo, Tank & Vessel Weighing and Axle Weighing
T95 Load Cell Assembly for Silo, Tank & Vessel Weighing and Axle Weighing Capacities 2t to 20t Stainless Steel Load Sensor OIML C3 approved Integrated Lift Off Prevention Load cell is always in Tension
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40
More informationWeigh Modules. Section Contents
Section Contents ITCM Isolated Tension Cell Modules...26 ITCM SS Isolated Tension Cell Modules, Stainless Steel...28 ITCM HE Isolated Tension Cell Modules, Stainless Steel, Welded-seal...30 RL50210 TA
More informationPW29... Data Sheet. Single point load cell. Special Features. Optional: Dimensions (in mm; 1 mm = inches) B en
PW29... Single point load cell Special Features Hermetically encapsulated (IP68; IP69K) - Accuracy class C3MR - OIML R60 test report - Maximum capacities 100 kg 1000 kg - Platform sizes 800 x 800Κmm -
More informationDMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
More informationSURVIVOR Paramounts HE Medium-Capacity Weigh Module Systems
SURVIVOR Paramounts HE Medium-Capacity Weigh Module Systems SURVIVOR Picture is a representation of actual product Consisting of three different weigh module designs, the Paramounts system offers superior
More informationDMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
More informationIntrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable
More informationSurface thermocouple Model TC50
Temperature Surface thermocouple Model TC50 WIKA data sheet TE 65.50 for further approvals see page 2 Applications To measure surface temperatures on flat surfaces or pipes, in both laboratory and industrial
More informationXMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
More informationModel 3400 Intrinsically Safe Load Cell
Stainless steel construction Sealed connector IP68 environmental protection Internally amplified 4-20 ma output, loop-powered Unipolar (T or C) or bipolar (T and C) Zero and span adjustment access CE certified
More informationAutomated Precision Weighing
Automated Precision Weighing Designed for Automation Compact Precision Weighing High precision Designed to meet the most demanding customer specifications. The WMS is a high speed high accuracy weigh module
More informationABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. 9QGPS5190 Trough hole (annular) heavy capacity load cell
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET 9QGPS5190 Trough hole (annular) heavy capacity load cell 2 Measurement made easy Annular compression load cell. Low profile for high capacity load cells
More informationLMK 387. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO
LMK 87 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... mho up to 0... 00 mho Output signal -wire: 4... 0 ma Special
More informationANATOMY OF A HARDY LOAD SENSOR
ANATOMY OF A HARDY LOAD SENSOR Blind Loading Hole Allows a spherical end loading pin to insure load is applied at the same precise location, eliminating unwanted effects of side and eccentric loads common
More informationDMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
More information9.6 Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - C O N T R O L S T A T I O N S Moulded plastic Version for Zone 1 and Zone 21 Even under the most adverse conditions, CEAG control stations can be used and operated reliably. The enclosures consist
More informationPFA579lift/PFA579xlift Efficient Cleaning 100% Stainless Steel Robust Industrial Design Ex Designs. Setting a New Standard in Challenging Environments
Hazardous Floor scales Area PFA579lift/PFA579xlift Efficient Cleaning 100% Stainless Steel Robust Industrial Design Ex Designs Setting a New in Challenging Environments PFA579lift/PFA579xlift The Raisable
More informationM-200X. Explosion Proof Adjustable Flow Switch with Right Angle Flow. Key Features. Description. Operating Principle. Applications
Explosion Proof Adjustable Flow Switch with Right Angle Flow Key Features Field adjustable Infinite flow range Extremely accurate and sensitive Low pressure drop UL recognized for hazardous location ATEX
More informationProduct specification
Product specification Measuring range of 4 mm Features Non-contacting displacement measurement based on the eddy-current principle System length: 5 m or 10 m with ATEX approval Temperature range: -50 C
More informationI Ex-control stations I
Type 11 83 Type 11 82 Type 11 81 Technical data Ex-control stations Type 11 81 I Type 11 82 I Type 11 83 Marking accd. to 9/9/EC II 2 G Ex ed ib m IIC T6 II 2 D Ex td A21 IP66 T80 C EC-Type Examination
More informationDMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet
More informationMagnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF)
Level measurement Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF) TC Fluid Control WIKA data sheet LM LM 3001 30.01 for further approvals see page 3 Applications
More informationM-100X. Explosion Proof Adjustable Flow Switch with Right Angle Flow. Key Features. Description. Operating Principle. Applications
Explosion Proof Adjustable Flow Switch with Right Angle Flow Key Features Field adjustable Infinite flow range Extremely accurate and sensitive Low pressure drop UL recognized for hazardous location ATEX
More informationType Electronic Limit Switch
Type 3738-20 Electronic Limit Switch With optional solenoid valve Application Electronic limit switch for on/off applications to indicate the end position. Optionally with integrated solenoid valve. Special
More informationRC3. LOADCELLS. Technical specification. FLINTAB is exclusive importer in Romania of FLINTEC Germany products.
LOADCELLS The FLINTAB Sweden loadcells innovation reorganised then by FLINTEC Germany is legendary, their design gaining the first place in the world and spectacular patents. Their pioneering force and
More informationTECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /09
Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-01 09/09 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners
More information200150, & Accelerometers Bently Nevada* Asset Condition Monitoring
200150, 200155 & 200157 Accelerometers Bently Nevada* Asset Condition Monitoring Description The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for
More informationCB50X & CB50X-DL load cells Influence factors in weighbridge application
CB50X & CB50X-DL load cells Influence factors in weighbridge application Introduction Vehicle scales can be considered as a platform that is supported by weight-sensing elements which produce an output
More informationProduct specification
Product specification Features Non-contacting displacement measurement based on the eddy-current principle System length: 5 m or 10 m with ATE approval Temperature range displacement sensor: -55 C +180
More informationFisher i2p 100 Electro Pneumatic Transducer
Product Bulletin D103197X012 i2p 100 Transducer Fisher i2p 100 Electro Pneumatic Transducer The Fisher i2p 100 electro pneumatic transducer, shown in figure 1, uses a converter module that converts a milliampere
More informationProduct specification
Product specification 4 mm Measuring Range Features Non-contacting displacement measurement based on the eddy-current principle System length: 5 m or 10 m with ATE approval Temperature range displacement
More informationThe platform is placed on the weighing platform using three or four height-adjustable elastomer bearings (EL 120), in order to avoid twisting.
LCS130 2t Description The load cell LCS130 is used in platform-type weighing scales. Three to four load cells support a platform of any size. The output current calibration allows parallel connection of
More informationWeigh Module Systems
Weigh Module Systems Weigh Module Systems Handbook Introduction This handbook is intended as a guide to selecting and applying METTLER TOLEDO weigh modules for process weighing applications. It provides
More informationBelt Scales Milltronics Belt Scales
Belt Scales Siemens AG 2013 Overview Milltronics MSI is a heavy-duty, high accuracy full-frame single idler belt scale used for process and load-out control. Idler not included with belt scale. Benefits
More informationABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. 9QGPS5500 Wire rope load cell
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET 9QGPS5500 Wire rope load cell 2 Measurement made easy Low cost load cell specially designed to measure the tension force on hoisting ropes. CE certified
More informationCERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL
More informationCable resistance thermometer Model TR40
Electrical temperature measurement Cable resistance thermometer Model TR40 WIKA data sheet TE 60.40 for further approvals see page 2 Applications For direct installation into the process Machine building
More informationWBS 3000 Water Bottom Sensor for fuel oil and chemical storage tanks Installation and Operating Instructions
Labkotec Oy Myllyhaantie 6 FI-33960 PIRKKALA FINLAND Tel: +358 29 006 260 Fax: +358 29 006 1260 12.3.2013 Internet: www.labkotec.com 1/12 WBS 3000 Water Bottom Sensor for fuel oil and chemical storage
More informationINTERNATIONAL METAL ENGINEERING
INDICATING TEMPERATURE TRANSMITTER WITH HART 8080HT UNIVERSAL SETTINGS WITH HART PROTOCOL FOR VARIOUS INPUT SIGNALS 2 WIRE TECHNOLOGY, 4 TO 20mA ANALOG OUTPUT HIGH ACCURACY IN TOTAL AMBIENT TEMPERATURE
More informationHM...TC-R. Turbine Flow Meters for Solvents and Di-Water. Technical Datasheet
www.kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet HM...TC-R Turbine Flow Meters for Solvents and Di-Water HMTC-R_D_E_150128_E003 Application Turbine flow meters serve to accurate
More informationDMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP
More informationL(+) SV1 N(-) NC. Terminal Block Connections L (+) N (-) SV1 K2 K1. Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Type Z & Ex pz purge and pressurization system Features 100% automatic purge and pressurization system including purging, temperature and leakage control, alarming and system power Third party approvals
More informationType Installation, Operation and Maintenance Instructions. Ordering Information. Contents CA20 -
Type 2000 Pneumatic and Electropneumatic Valve Positioner Installation, Operation and Maintenance Instructions Ordering Information Use this coding system to order Model CA20 - Type of Positioner 00 P/P
More informationATEX/IECEx RTD temperature probe
Page 1/8 ATEX/IECEx RTD temperature probe with connecting cable acc. to DIN EN 60751 For temperatures from -100 to +600 C As single, double, or triple RTD temperature probe In two-wire, three-wire, or
More informationType Z & Ex pz purge and pressurization system
Type Z & Ex pz purge and pressurization system Features 100% automatic purge and pressurization system including purging, temperature and leakage control, alarming and system power Third party approvals
More informationM-60X. Explosion Proof Flowswitch with In-line Flow. Description. Key Features. Operating Principle. Applications. Custom Version Available
Explosion Proof Flowswitch with In-line Flow Key Features Well suitable for corrosive and noncorrosive liquids or gases UL recognized for hazardous location ATEX certified for intrinsic safety and encapsulation
More informationCompact. range of Weighing Assemblies.
APPLIED WEIGHING INTERNATIONAL Compact range of Assemblies. upto IP68 Features 20kg to 2,000kg capacities. For platform, hoppers, tanks and Silo weighing. Robust hygenic design for harsh industrial applications.
More informationUltra High Purity Transducer, Ex na ic Models WUC-10, WUC-15 and WUC-16
Electronic Pressure Measurement Ultra High Purity Transducer, Ex na ic Models WUC-10, WUC-15 and WUC-16 WIKA Datasheet WUC-1X Applications Semiconductor, flat panel display and photovoltaic industry Specialty
More informationVersaFlow Coriolis 100 Mass Flow Sensor Specifications
VersaFlow Coriolis 100 Mass Flow Sensor Specifications 34-VF-03-09 May 2011 The Universal Solution for the Process Industry VERSAFLOW is the only sensor for mass flow in its class with secondary pressure
More informationData Sheet DS/NGB-EN Rev. B. Multi barriers. Measurement made easy. Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1
Data Sheet DS/NGB-EN Rev. B Multi barriers Measurement made easy Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1 Change from two to one column Multi barriers Change from one to two columns
More informationModel 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz)
6AXX 10-20 - 17 Model 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz) Interface s 6-axis load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about
More informationOPTIGAS 4010C Technical Datasheet
OPTIGAS 4010C Technical Datasheet Sensor for gas dispenser applications Compact design for easy istallation High accuracy with wide measuring range Designed to fit existing dispensers The documentation
More informationTECHNICAL BULLETIN. Logix 505si Series Digital Positioner. Experience In Motion FCD LGENTB /13
Logix 505si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0505-03 09/13 Experience In Motion Introduction The Logix 505si is a basic positioner for most simple control loops. It is microprocessor
More informationLIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX )
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX ) Publication# 03revA Table of Contents Publication# 03revA Table Of Contents...
More informationFisher 3660 and 3661 Positioners
3660 and 3661 Positioners Product Bulletin Fisher 3660 and 3661 Positioners Fisher 3660 pneumatic and 3661 electro pneumatic single acting positioners are used with various actuators on sliding stem valves
More informationLoad Cells. For Test, Measurement, and Monitoring Requirements in Automotive, Aerospace, R&D, and Process Control Applications
Load Cells For Test, Measurement, and Monitoring Requirements in Automotive, Aerospace, R&D, and Process Control Applications Highlights Low Deflection; High Accuracy Fatigue-rated Versions Low Profile
More informationUltra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26
Electronic Pressure Measurement Ultra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26 WIKA Datasheet WU-2X Applications Gas panels for OEM tools Semiconductor, flat panel display and photovoltaic
More informationTerminal Boxes Series 8125
Series > Wide product range > Enclosure of electropolished stainless steel.0 (AISI L) or galvanised steel sheet painted > basic enclosure sizes various heights > Fitted according to the customer's requirements
More informationLMK 387. Stainless Steel Probe DRUCK & TEMPERATUR LEITENBERGER GMBH. Ceramic Sensor
DRUCK & TEMPERATUR LEITENBERGER GMBH LMK 87 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... mh O up to 0... 00 mh
More informationAttachment to Certificate IECEx PTB X
Applicant: Electrical Apparatus: Pepperl + Fuchs GmbH Cuboidal inductive proximity sensors Types Fj, NJ, NB and NC The cuboidal inductive proximity sensors of types Fj, NJ, NB and NC are used to convert
More informationResistance thermometer Without thermowell Model TR10-H
Temperature Resistance thermometer Without thermowell Model TR10-H WIKA data sheet TE 60.08 for further approvals see page 2 Applications For direct installation into the process Machine building Motors
More informationINSTALLATION & MAINTENANCE MANUAL
A Subsidiary of Dynamic Instruments INSTALLATION & MAINTENANCE MANUAL A Subsidiary of Dynamic Instruments 3860 Calle Fortunada San Diego, CA 92123-1825 Phone: 1-(800) 821-5831 Web Site: hardyinst.com (858)
More informationThermocouple For additional thermowell Model TC10-B
Temperature Thermocouple For additional thermowell Model TC10-B WIKA data sheet TE 65.02 for further approvals see page 2 Applications Machine building, plant and vessel construction Energy and power plant
More informationTemposonics. Magnetostrictive Linear Position Sensors. TH Analog SIL 2 capable Data Sheet
Temposonics ostrictive Linear Position Sensors TH Analog SIL 2 capable ATEX / IECEx / CEC / NEC / EAC Ex certified / Japanese approval Continuous operation under harsh industrial conditions Flameproof
More informationE II 3 (1) G Ex na [ia Ga] IIC/IIB T4 Gc
900/77-80-094-001 158877 For the intrinsically safe operation of a wide range of devices, such as HART transmitters, solenoid valves, sensors, zero-potential contacts and many more compact, space-saving
More informationOPTIGAS 4010C Technical Datasheet
OPTIGAS 4010C Technical Datasheet Sensor for gas dispenser applications Compact design for easy istallation High accuracy with wide measuring range Designed to fit existing dispensers The documentation
More informationDPT 200. Differential Pressure Transmitter for Process Industry with HART -Communication. accuracy according to IEC 60770: 0.
Differential Pressure Transmitter for Process Industry with HART Communication accuracy according to IEC 60770: 0.075 % FSO Differential pressure from mbar up to 0 bar Static pressure max. Output signal
More informationLoad Cells/Weigh Modules
Table of Contents Weigh Modules SURVIVOR ITCM HE...LW-4 SURVIVOR Paramounts HE...LW-6 RL 1700 HE Series...LW-8 RL 1600 HE Series...LW-10 RL 1855HE......LW-12 RL 2100HE......LW-14 ITCM...LW-16 ITCM SS...LW-18
More informationOperating Instructions Installation Information. METTLER TOLEDO MultiRange Weighing Platforms PFA574 / PFA575(x) / PFA579(x)
Operating Instructions Installation Information METTLER TOLEDO MultiRange Weighing Platforms PFA574 / PFA575(x) / PFA579(x) www.mt.com/support Content 1. General information... 4 2. Safety instructions...
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationOPTIMASS 3000 Technical Datasheet
OPTIMASS 3000 Technical Datasheet Sensor for mass flow First choice for low flow applications Certified secondary pressure containment A common footprint for all three sizes, in Hastelloy or Stainless
More informationSeries Level-Trol Electronic Liquid Level Transmitters
0- Level-Trol Series 0- Series Level-Trol Electronic Liquid Level Transmitters W0-/IL Non-Interactive Zero and Span Adjustments; Dry Span Calibration Allows Field Recalibration without Removing Wiring
More informationContinuous Duty Torque Measurement. Directly and accurately measures the power of turbomachinery in the Oil, Gas and Petrochemical industries.
Continuous Duty Torquetronic TM Continuous Duty Torque Measurement. Directly and accurately measures the power of turbomachinery in the Oil, Gas and Petrochemical industries. Measuring steady state torque
More informationINLINE Flow sensor for hazardous area II 1 G/D - II 2 D - II 3 GD - I M1
INLINE Flow sensor for hazardous area II G/D - II D - II GD - I M Type SE0 Ex can be combined with... Flow meter with NAMUR or NPN/PNP output signal Mounting, dismounting of electronics by a Quarter-Turn
More informationThermocouple Without thermowell Model TC10-H
Temperature Thermocouple Without thermowell Model TC10-H WIKA data sheet TE 65.08 for further approvals see page 2 Applications For direct installation into the process Machine building Motors Bearing
More informationFlap-Type Flow Meter Prall
Suitable for H 2 O, acids, alkaline solutions and gases Spring-loaded flap Horizontal or vertical direction of flow Largely independent of viscosity Limit contacts, optional Analog output 4 20 ma, optional
More informationModels 4700P/4700E & 4800P/4800E
GE Oil & Gas Technical Specifications 09/202 Masoneilan * Products Models 4700P/4700E & 4800P/4800E Corrosion-resistant Positioners Numbering System Series Identification 4abcd a Output capacity 7 Standard
More informationDirect-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
More information