DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

Transcription

1 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø 00 mm communication interface USB 2.0 Optional accredited calibration certificate IS-version zone software incl. USB converter service case with accessories Functions The digital pressure gauge DM0 is a precision device fulfilling highest demands. It was conceived especially for the process monitoring and calibration. The advantage: With the digital display DM0, different pressure transmitters can be used for various measurement ranges. The pressure transmitter can be selected and easily exchanged for the required pressure range on site without tools or parameter setting. Outstanding measuring qualities, an intuitive operation, as well as an innovative, modular sensor concept characterise the DM0. The batterypowered digital pressure gauge can be used e.g. for controlling pressure courses or calibrating pressure transmitters. The integrated data logger is able to record pressure and temperature values linearly and cyclically which can be analysed with software BD DAQ. Preferred areas of use are Calibrating techniques zero point calibration data logger turn off automatic configurable switch-off automatic background illumination Laboratory applications Plant and Machine Engineering BD SENSORS GmbH BD-Sensors-Straße Tel +9 (0) / D Thierstein Fax +9 (0) / 98 -

2 Technical Data Input pressure Nominal pressure gauge [bar] Nominal pressure abs. [bar] Overpressure [bar] Burst pressure [bar] Nominal pressure gauge / abs. [bar] Overpressure [bar] Burst pressure [bar] Vacuum resistance P N bar: unlimited vacuum resistant; P N < bar: on request Performance Accuracy standard for P N 0. bar: ± 0.05 % standard for P N < 0. bar: ± 0.25 % Long term stability ± 0. % FSO / year at reference conditions Measuring rate / Display, 2 or 50 measurements per second accuracy according to IEC minimum value setting (non-linearity, hysteresis, repeatability) - at room temperature 20 C Thermal effects (Offset and Span) for nominal pressure ranges P Temperature error N 60 bar: tolerance band ± 0.2 % FSO for nominal pressure ranges P N > 60 bar: tolerance band ± 0.75 % FSO compensated range C Permissible temperatures medium: C / storage: C Permissible temperatures environment: display module: C / transmitter: C (at G to +60 C) Materials Pressure port / housing stainless steel.0 (36L) Display housing stainless steel.30 (30) Seals (media wetted) FKM, without ( version) Diaphragm Stainless steel.35 (36L) Media wetted parts pressure port, seal, diaphragm Explosion protection AX6-DM0 IBExU2ATEX08 X standard variant for zone : II 2G Ex ia IIC/IIB T Gb variant with conductive front foil for zone 0: II G Ex ia IIC/IIB T Ga (on request) Miscellaneous Display graphic LC display: visible area 55 x 6 mm; (resolution 28x6) figure height 5.5 mm (displaying of pressure value) measured value display: max. 7 digits, depending on pressure range temperature display, time, 00-segment-bargraph, potential input value background illumination: illumination period and intensity adjustable Temperature display range adjustable units pressure and temperature Data logger Current consumption Supply Ingress protection IP 67 Mounting position 2 any accuracy: ± 2 K resolution: 0, K display: C [bar], [mbar], [psi], [inhg], [cmhg], [mmhg], [hpa], [kpa], [Mpa], [mh 2O], [mmh 2O], [inh 2O], [kg/cm²], [ C], [ F], [K] modes: single, cyclic, linear, off recording pressure values and sensor temperature measuring value interval adjustable (hrs, min, sec, 20 ms, daily at a defined time) measurement rate adjustable (/s, 2/s or 50/s only with 20 ms measured value interval) max values without background illumination: approx.,3 ma with background illumination: approx. 6 ma (depending on adjusted intensity) standby mode: approx.,2 µa 3x,5 V: Duracell Plus battery, DUR087033, AA (LR6) Weight approx. 680 g A / D-converter resolution 6 bit (module) Battery life standard use: > h standby mode: at least 5 years (with measurement rate /s and 2/s) Load cycles > 00 x 0 6 CE-conformity EMC directive: 20/30/EU, pressure equipment directive: 20/68/EU (Module A) 3 electromagnetic compatibility: according to EN Pressure transmitters are calibrated in a vertical position with the pressure connection down. If this position is changed on installation there can be slight deviations in the zero point for pressure ranges P N bar. 3 This directive is only valid for devices with maximum permissible overpressure > 200 bar. pressure and level

3 Technical Data Dimensions (in mm) standard G/2" EN 837 G/2" EN 837 (pressure transmitter and display separated) option G/2" DIN 3852 G/" DIN 3852 G/2" DIN 3852 G/ EN 837 with flush sensor internal thread,, 5 /2" NPT /" NPT G /" EN 837 G/2" DIN 3852 open pressure port metrical threads and other variations on request only possible for nominal pressure ranges P N 0 bar 5 different connection versions with optional adapters possible (see accessories)

4 Technical Data Further pressure sensor modules can be combined to the advertisement unity DM0-A2 and DM0-A2E. a overview of available pressure sensor modules and characteristics you will find in the following matrix: Pressure sensor module Name Pressure range Filling fluid diaphragm accuracy Special feature further information M0 M M , bar up to bar bar up to bar 0...0, bar up to bar silicone oil none; version stainless steel.35 stainless steel.52 0,05% FSO very high precision 0,25% FSO i.a. for oxygen; oil and grease free none ceramic 96% 0,5% FSO High overpressure Data sheet M0 Data sheet M Data sheet M7 Accessories Accessories are not in scope of supply and have to be ordered separately! BD DAQ software Optionally software BD DAQ and an interface cable can be ordered. The software is also available for download on our homepage. Software: display of device information (serial number, pressure and temperature range, ) configuration area for all parameters download area for recorded data: - date - pressure measurement - temperature measurement actual value Interface cable with integrated USB converter l:.7 m Ordering number: ZUSBCD0 Adapter for pressure port G ¼ EN 837 ¼ NPT Ordering number: Z G ½ EN 837 Ordering number: Z50020 ½ NPT external thread: ¼ NPT Ordering number: Z * others on request external thread: G ½ EN 837 Ordering number: Z external thread: ½ NPT pressure and level

5 Technical Accessories Data Hard-shell service case without accessories Hard shell case. Dimension in mm (L x W x H): 32 X 363 X 38 Service_Case_DM0 Protective cap Ordering number: Z00268 Additional batteries Seal set PTFE seal tape Nr Wrench Calibration test pump KHP 35 Ordering number: Adapter for calibration test pump Test unit connection: Adapter to connect the test unit to the calibration test pump. Reference unit connection: Adapter to connect the digital gauge to the calibration test pump Rubber protection for IS-version use only 3 x.5 V / AA Duracell Power Plus Flat seal copper for mechanical connections according to EN 837 Seal tape for mechanical connections material: PTFE (Teflon) Temperature range: C Wrench SW 27 The KHP 35 calibration test pump is used to generate pressure and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point. pressure: bar vacuum: ,95 bar weight: ca. 50 g dimension: ca. 220 x 05 x 63 mm Adapter to connect the test unit to the calibration test pump. to: internal thread: G ¼ DIN 3852 (No ) or G ½ EN o. DIN (No ) or ¼ NPT (No ) or ½ NPT (No ) others on request Adapter to connect the pressure sensor module DM0 to the calibration test pump. external thread: G ½ EN 837 to: internal thread: G ¼ DIN 3852 (No ) or G ½ DIN 3852 (No ) or ¼ NPT (No ) or ½ NPT (No ) others on request 207 BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. DM0_E_3077 Tel +9 (0) / Fax +9 (0) /

6 Ordering code DM0. position: digital display for Precision Digital Pressure Gauge DM0 DM0- Digital pressure gauge DM0 with communication interface A 2 IS with communication interface A 2 E 2. position: transmitter for Precision Digital Pressure Gauge DM0 DM Pressure gauge absolute M 0 K M 0 L Input [bar] X consult Version non IS 0 IS E Accuracy standard for P N 0. bar 0.05% B standard for P N < 0. bar 0.25% B consult Mechanical connection G/2" DIN 3852 G/2" EN 837 G/" DIN 3852 G/" EN G/2" DIN with flush sensor F 0 0 consult 2 G/2" DIN 3852 open pressure port /2" NPT /" NPT G /" EN837 internal thread, 2, 3 H 0 0 N 0 0 N 0 J consult Seals FKM 9 consult Special version standard consult absolute pressure possible from 0. bar 2 only possible for P N 0 bar 3 different connection versions with optional adapters possible (see accessories) ordering example: device DM0: position : DM 0-A2 position 2: M0K-00-B only display: position : DM0-A2 only transmitter: position 2: M0K-00-B

7 Accessories DM0 Accessories USB converter (incl. software BD DAQ) ZUSBCD0 service case (without accessories) Service_Case_DM0 Protective cap Z00268 Additional batteries (3 x,5 V / AA Duracell Power Plus) Seal set PTFE seal tape wrench Calibration test pump (KHP) Adapter for DM0 G/ EN 837 male - G/" EN 837 male Z G/ EN 837 male - G/2" EN 837 male Z G/ EN 837 male - /" NPT male Z50020 G/ EN 837 male - /2" NPT male Z Adapter for KHP - test unit connection G/" EN 837 m - G/" DIN3852 fm G/" EN 837 m - G/2" EN 837/DIN3852 fm G/" EN 837 m - /" NPT fm G/" EN 837 m - /2" NPT fm Adapter for KHP - reference unit connection G/2" EN 837 m - G/" DIN3852 fm G/2" EN 837 m - G/2" DIN3852 fm G/2" EN 837 m - /" NPT fm G/2" EN 837 m - /2" NPT fm only in combination with service case BD SENSORS GmbH - The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.