ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. 9QGPS5190 Trough hole (annular) heavy capacity load cell
|
|
- Job Wilkerson
- 5 years ago
- Views:
Transcription
1 ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET 9QGPS5190 Trough hole (annular) heavy capacity load cell
2 2 Measurement made easy Annular compression load cell. Low profile for high capacity load cells Material Stainless steel (model 9QGPS5190) Nickel plated steel (model 9QGPS5195) IP rating IP 65 Sturdy design Available options (non exhaustive list) ATEX intrinsic safety High service temperature 50 to 180 C ( 58 to 356 F) Dual Wheatstone bridge Amplified output (V or ma) and digital output signal (RS-232C, RS-485, USB)
3 3 Change from one to two columns Applications The load cell 9QGPS5190-9QGPS5195 is perfectly designed to the following applications: Pre-stressed rods measurement (concrete, snow, grounds, rocks.) Industrial force measurement in confined spaces Capacities Model 9QGPS5190-9QGPS kn (0.75) MN Model 9QGPS5195 Explosion protection (Option) (7.5) MN ATEX intrinsic safety Ex II 1GD Ex ia IIC T6 or T4 Ga Ex ia IIIC T80 C Da Change from two to one column Specification SL Repeatability error < ± 0.25 % F.S. Creep error over 30 min. < ± 0.3 % F.S. Zero shift after loading < ± 0.5 % F.S. Temperature coefficient of the sensitivity < ± 0.2 % F.S./10 C Temperature coefficient of zero signal < ± 0.2 % F.S./10 C Reference temperature 23 C (73.4 F) Temperature data Nominal temperature range 10 to 45 C (14 to 113 F) Service temperature range 25 to 70 C ( 13 to 158 F) Storage temperature range 50 to 85 C ( 58 to 185 F) Electrical data Input resistance 702 Ω ± 2 Ω Output resistance 702 Ω ± 2 Ω Insulation resistance (50V) > 5000 MΩ Reference excitation voltage Nominal range of excitation voltage Zero balance Nominal sensitivity 10 V 3 to 12 V ± 0.02 mv/v 1.5 mv/v Load limits Safe load limit 150 % F.S. Breaking load > 300 % F.S. Static lateral force limit 25 % F.S. Permissible dynamic loading 50 % F.S. Table 1: (F.S.: full scale) Specifications subject to change without notice
4 4 Dimensions Load cell model 9QGPS5190 (stainless steel), model 9QGPS5195 (nickel plated steel) All specified dimensions are in mm (in.) B A D H H/2 C Pressure < or = 30 kg/mm/2 MALE min 74 (2.91) FEMALE Pressure < or = 20 kg/mm/2 R00055 Figure 1: Dimensions Ref. Item 519x-A 519x-B 519x-C Capacities 200 to 300 kn 500 kn 0.75 to 1 MN 519x-D 1.5 to 2 MN 519x-E 3 MN 519x-F 5195-G 5195-H 5195-I 5195-J 5 MN 10 MN 7.5 to 15 MN 20 MN ØA ØB ØC D H H1 H2 Ø1 Ø2 Max. CL m (ft) Weight kg Deflexion (lb) (2.36) (1.93) (0.79) (2.60) (2.76) (0.87) (1.18) (1.77) (2.24) (0.0031) (9.84) (3) (3.54) (3.15) (2.32) (1.18) (1.10) (1.57) (2.20) (2.60) (0.0039) (19.69) (7) (2.60) (4.33) (3.50) (1.97) (3.19) (3.94) (1.57) (1.97) (5.91) (4.72) (2.52) (3.78) (5.51) (1.97) (7.09) (6.10) (3.15) (4.88) (6.30) (2.56) (3.82) (0.0047) (19.69) (12) (2.36) (4.92) (5.08) (0.0059) (39.37) (37) (2.95) (6.50) (6.77) (0.0067) (39.37) (57) (3.54) (9.06) (7.87) (4.13) (5.91) (7.48) (2.95) (3.54) (7.87) (8.86) (0.0079) (39.37) (110) (11.42) (11.42) (5.91) (13.39) (13.39) (6.50) (15.35) (15.35) (7.87) 30 MN Table 2: Other dimensions ØA, ØB and H on request (10.24) (2.36) (5.12) (11.81) (15.24) (0.0118) (65.62) (220) (11.42) (3.15) (5.91) (13.78) (18.90) (0.0134) (65.62) (385) (12.99) (4.33) (6.89) (15.55) (21.46) (0.0150) (65.62) (573) Available on request
5 5 Accessories Supor H2 A H5190 H1 H Wiring code Load direction 1 - Exct. - Yellow (Jaune) Sig. + Green (Vert) - Sig. - White (Blanc) 6 DIN Exct. + Brown (Brun) Connector - Sense Grey (Gris) Accessories Force + Sense Pink (Rose) Standard: Cable screen not connected to transducer Faradisation non connectée au capteur Figure 2: Force + FZ R00056
6 26 Notes 9QGPS5190 9QGPS5190 TROUGH TROUGH HOLE HOLE (ANNULAR) (ANNULAR) HEAVY HEAVY CAPACITY CAPACITY LOAD LOAD CELL CELL DS/9QGPS5190-EN DS/9QGPS5190-ENREV. REV.AA Measurement made easy Annular compression load cell. Low profile for high capacity load cells Material Stainless steel (model 9QGPS5190) Nickel plated steel (model 9QGPS5195) IP rating IP 65 Sturdy design Available options (non exhaustive list) ATEX intrinsic safety High service temperature 50 to 180 C ( 58 to 356 F) Dual Wheatstone bridge Amplified output (V or ma) and digital output signal (RS-232C, RS-485, USB)
7 7
8 ABB Automation GmbH Measurement & Analytics Force Measurement Oberhausener Str Ratingen Germany Tel: Fax: Mail: DS/9QGPS5190-EN Rev. A We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB. Copyright 2018 ABB All rights reserved 3BDE abb.com/measurement
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. 9QGPS5500 Wire rope load cell
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET 9QGPS5500 Wire rope load cell 2 Measurement made easy Low cost load cell specially designed to measure the tension force on hoisting ropes. CE certified
More informationBRIDGE-BOY Load limitation electronics with 1 or 3 set points
Change from one to two columns Data Sheet DS/BRIDGE-BOY-LCI-EN Rev. A BRIDGE-BOY Load limitation electronics with 1 or 3 set points Electronics with 1 or 3 set points designed, in combination with a load
More informationData Sheet DS/NGB-EN Rev. B. Multi barriers. Measurement made easy. Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1
Data Sheet DS/NGB-EN Rev. B Multi barriers Measurement made easy Fieldbus barrier for PROFIBUS PA for FOUNDATION Fieldbus-H1 Change from two to one column Multi barriers Change from one to two columns
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. Series and Katharometer power supply units
ABB MEASUREMENT & ANALYTICS DATA SHEET Series 4234-500 and 4234-600 Katharometer power supply units 2 SE RIE S 4 23 4-500 AN D 4 23 4-600 K ATHAROME TE R POWE R SU PPLY U NITS DS/4 23 4-E N RE V. F Measurement
More informationABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. Electronic unit and accessories Retrofitting on Contrac
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET Electronic unit and accessories Retrofitting on Contrac 2 ELECTRONIC UNIT AND ACCESSORIES RETROFITTING ON CONTRAC DS/CONTRAC/UPGRADE-EN REV. C Options for
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. TEIP11 I/P signal converter for standard signals
ABB MEASUREMENT & ANALYTICS DATA SHEET TEIP11 I/P signal converter for standard signals 2 TEIP11 I/P SIGNAL CONVERTER FOR STANDARD SIGNALS DS/TEIP11-EN REV. D Flow in air pressure Proven and reliable concept
More informationFICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
More informationABB i-bus KNX DG/S x DALI-Gateway Basic
ABB i-bus KNX DG/S x.64.1.1 DALI-Gateway Basic The lamps are variably controlled via KNX per DALI output via Broadcast (all lamps jointly) 16 lighting groups 64 individual lamps 16 scenes 64 self-contained
More informationTechnical Description. Wireless Automation Accessories
Technical Description Wireless Automation Please note the following Target group This description is intended for the use of trained specialists in electrical installation and control and automation engineering,
More informationProduct Brochure. Generator Circuit-Breaker HVR-EBCB For hydro or pump storage power plant
Product Brochure Generator Circuit-Breaker HVR-EBCB For hydro or pump storage power plant Introduction General The braking switch serves the purpose of electrical braking a machine in a hydro or pumped
More informationK3D300 ±200kN. Description
K3D300 ±200kN The 3-axis sensor K3D300 is suitable for measuring force in three mutually perpendicular axes. Force is applied from the 150 mm x 150 mm recess. A component can be installed on this surface
More informationModel 3400 Intrinsically Safe Load Cell
Stainless steel construction Sealed connector IP68 environmental protection Internally amplified 4-20 ma output, loop-powered Unipolar (T or C) or bipolar (T and C) Zero and span adjustment access CE certified
More informationK3D300 ±50kN. Description
K3D300 ±50kN The 3-axis sensor K3D300 is suitable for measuring force in three mutually perpendicular axes. Force is applied from the 150 mm x 150 mm recess. A component can be installed on this surface
More informationRS85 Vibrating fork level switch
Data sheet DS/-EN Rev. P Multi-option liquid level switch K-TEK Level products Measurement made easy Features Direct replacement for ultrasonic Gap switches, RF capacitance switches, float switches and
More informationLoad Cell Accessories
Force Pressure Temperature Switch Load Cell Accessories Force Introduction modules and mounting devices Description The mounting of load cells in an application requires high diligence if the force measuring
More informationMoving Coil Indicators with direct temperature sensor input
Data Sheet 10/30-1.66-EN Rev. A Moving Coil Indicators with direct temperature sensor input Inputs Resistance thermometers, resistance-type remote sensor (thermocouples on request) Formats Square indicators
More informationEAS822 (Contrac) Power Electronic Unit
Contents Data Sheet Rev. A EAS822 (Contrac) Power Electronic Unit For continuous control of Contrac actuators PME120 AN and LME620 AN Microprocessor-controlled power electronic unit with integrated frequency
More informationShut-off valves and accessories for pressure measuring instruments
Data Sheet 10/14-4.31-EN Shut-off valves and accessories for pressure measuring instruments Non-replaceable seat and plug Application Shut-off valves for pressure measuring instruments are designed for
More informationModel 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz)
6AXX 10-20 - 17 Model 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz) Interface s 6-axis load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about
More informationModel WEP Electro-pneumatic positioner. WEP positioner A valve control without compromise
Data Sheet DS/WEP-EN Rev. C Model WEP Electro-pneumatic positioner WEP positioner A valve control without compromise Standard - ma input Single acting, force-balance operating principle Excellent dynamic
More informationSWC515 PinMount. Right the First Time Safe, Accurate, Service Friendly. SWC515 PinMount. Right the First Time
SWC515 PinMount Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWC515 PinMount weigh modules offer rugged construction and many features for easy installation and accurate and reliable
More informationThe platform is placed on the weighing platform using three or four height-adjustable elastomer bearings (EL 120), in order to avoid twisting.
LCS130 2t Description The load cell LCS130 is used in platform-type weighing scales. Three to four load cells support a platform of any size. The output current calibration allows parallel connection of
More informationHLC A1... HLC B1... HLC F1...
HLC A1... HLC B1... HLC F1... Load Cells Data sheet Special Features Hermetically encapsulated (IP68) Maximum capacities: 110 kg... 10 t Rust-resistant materials Low height of construction Meets EMC requirements
More informationControl Valve 23 / 24 Single-seat straight-way valve with exchangeable seat ring
Change from one to two columns Data Sheet 10/138.29EN Rev. B Control Valve 23 / 24 Singleseat straightway valve with exchangeable seat ring Size DN 15... DN 100 With pneumatic actuator Verschiedene Gehäusewerkstoffe
More informationRSDE10 / RSDE20 (Contrac) Electrical Linear Actuator
Contents Data Sheet Rev. A RSDE10 / RSDE20 (Contrac) Electrical Linear Actuator For continuous positioning, In explosion-proof design, Rated force 10 kn / 20 kn (2200 lbf / 4400 lbf) Electrical actuator
More informationRSD100 (Contrac) Electrical Linear Actuator
Contents Data Sheet Rev. A RSD100 (Contrac) Electrical Linear Actuator For continuous positioning, Rated force 100 kn (22500 lbf) Electrical actuator for continuous positioning or step control Stallproof
More informationLoad cells. Data sheet. Special features. Cable assignment (six wire configuration)
HLC A1 HLC B1 HLC F1 Load cells Special features - Hermetically encapsulated (IP68) - Maximum capacities: 110 kg... 10 t - Rust resistant materials - Low height of construction - Meets EMC requirements
More informationAdditional Information. Measurement made easy
ABB MEASUREMENT & ANALYTICS PARTS LIST VortexMaster FSV430, FSV450 SwirlMaster FSS430, FSS450 Vortex and Swirl Flowmeter Measurement made easy VortexMaster FSV430, FSV450 SwirlMaster FSS430, FSS450 Additional
More informationFuse-links type CEF-S Rated voltages: 6/12 kv 30/40.5 kv Rated currents: 6.3 A 63 A
DISTRIBUTION SOLUTIONS Fuse-links type CEF-S Rated voltages: 6/12 kv 30/40.5 kv Rated currents: 6.3 A 63 A Superior performance versus standard fuses ensuring up to 40% faster protection in case of low
More informationMini contactors B6, BC6 with 3 pole
Data sheet Mini contactors B6, BC6 with 3 pole Mini contactors from ABB are used for remotely ling motors and other loads wherever space is at a premium. These devices feature hum free coils, shallow depth,
More informationThe perfect solution for wellhead flow measurement with CoriolisMaster, ProcessMaster and VortexMaster
Application note AN/FLOW/101-EN Rev. A The perfect solution for wellhead flow measurement with CoriolisMaster, ProcessMaster and VortexMaster Complete flowmeter instrumentation with a high level of accuracy
More informationService Fieldbus Engineering and Consulting
Change from one to two columns Data Sheet DS/SEE200-EN Rev. B Service Fieldbus Engineering and Consulting Consulting Bus technology & tool consulting Engineering Bus topology design Service Fieldbus Engineering
More informationThermal overload relay TF140DU and TF140DU-V1000
Data sheet Thermal overload relay TF140DU and TF140DU-V1000 Thermal overload relays are economic electromechanical protection devices for the main circuit. They are used mainly to protect motors against
More informationMW05 MagWave Magnetic Level Gauge. Dual chamber level system K-TEK Products
Data sheet DS/MW05-EN Rev. C MW05 MagWave Magnetic Level Gauge Dual chamber level system K-TEK Products Multiple Chamber Styles 24 Preconfigured Styles Plus Custom Styles Left Hand or Right Hand Mounted
More informationValve Blocks. For direct flanging to pressure and differential pressure transmitters. Drop-forging housing. Replaceable valve seat
Data Sheet 10/14-5.32-EN Valve Blocks For direct flanging to pressure and differential pressure transmitters Drop-forging housing Replaceable valve seat Valve stem with back-flow seal and crimped valve
More informationABB i-bus KNX Hotel IP Link, Bundle HIL/S , 2CDG110237R0011
Technical data 2CDC502097D0201 ABB i-bus KNX Product description HIL/S 20.1.1 The Hotel IP Link is used to connect zones of up to 20 KNX TP devices with central systems (such as Visualizations or Hotel
More informationABB i-bus KNX HIL/S , Hotel IP Link, Bundle
ABB i-bus KNX HIL/S 20.1.1, Hotel IP Link, Bundle Description of product HIL/S 20.1.1 Hotel IP Link, Bundle The Hotel IP Link is used to connect zones of up to 20 KNX TP devices with central systems (such
More informationThermal overload relay TF65 and TF96
Data sheet Thermal overload relay TF65 and TF96 Thermal overload relays are economic electromechanical protection devices for the main circuit. They are used mainly to protect motors against overload and
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More information2600T Series Pressure Transmitters Custom Linearization Table with ABB Asset Vision Basic
Technical Information TI/266LT-EN Rev.A 2600T Series Pressure Transmitters Custom Linearization Table with ABB Asset Vision Basic Measurement Made Easy Engineered solutions for all applications Improved
More informationElectronic overload relays EF205 and EF370
Data sheet Electronic overload relays EF205 and EF370 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
More informationMEDIUM VOLTAGE PRODUCT. TJC 4 Indoor voltage transformers
MEDIUM VOLTAGE PRODUCT TJC 4 Indoor voltage transformers 2 TJC 4 INDOOR VOLTAGE TRANSFORMERS Parameters Highest voltage for equipment Power frequency test voltage, 1 min. Lightning impulse test voltage
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationKM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, 5kN
KM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, Description The load cell KM26z is a membrane-type force sensor with small dimensions. It is suitable for measuring compressive and tensile forces. For force
More informationLoad cell PR for maximum corrosion resistance. Load cell PR 6212 benefits. Mounting kit PR 6012 benefits
Load cell PR 6212 for maximum corrosion resistance Load cell PR 6212 benefits Maximum corrosion resistance High-temperature version available for up to 180 C Easy and failure-free installation using the
More informationPW29... Data Sheet. Single point load cell. Special Features. Optional: Dimensions (in mm; 1 mm = inches) B en
PW29... Single point load cell Special Features Hermetically encapsulated (IP68; IP69K) - Accuracy class C3MR - OIML R60 test report - Maximum capacities 100 kg 1000 kg - Platform sizes 800 x 800Κmm -
More informationInsulated crimp terminals For reliable device connection
E L EC T R I FI C AT I O N P R O D U C T S, I N S TA L L AT I O N P R O D U C T S Insulated terminals For reliable device connection ELECTRIFICATION PRODUCTS AUSTRALIA AND NEW ZEALAND Spec-Kon Wire terminals
More informationSWB505 MultiMount EN1090
SWB505 MultiMount EN90 Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount weigh modules offer rugged construction and many features for easy installation and accurate
More informationSurge arrester POLIM-H..SD
Data sheet Surge arrester POLIM-H..SD Technical data Classification according to EN 50526-1 and IEC 62848-1 Nominal discharge current I n (8/20 µs) 10 ka peak Class DC-B High current impulse I hc (4/10
More informationFuse-links type CEF-VT Rated voltages 3/7.2 kv - 10/24 kv Rated current 0.5 A 6.3 A
DISTRIBUTION SOLUTIONS Fuse-links type CEF-VT Rated voltages 3/7.2 kv - 10/24 kv Rated current 0.5 A 6.3 A Efficient protection of voltage transformer circuits Extending the lifetime of installed electrical
More informationSystem pro M compact Supplementary protector S 200 PR for ring-tongue applications acc. to UL1077
Data Sheet System pro M compact Supplementary protector S 200 PR for ring-tongue applications acc. to UL1077 2CDC021026S0011 2CDC021016S0012 The S 200 PR is a high-performance supplementary protector with
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40
More informationLV Capacitors QCap-L series Capacitors for power factor correction
LV Capacitors QCap-L series Capacitors for power factor correction ABB and power quality ABB is a leader in power and automation technologies that enable utility and industry customers to improve their
More informationElectronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays are the alternative to the thermal overload relays. An electronic overload relay offers reliable and fast protection
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More information1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide
1ZSE 2750-106 EN, REV. 7 Oil SF 6 bushings type GOEK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationSLB415 Load Cell. Global Usage No Compromise on Performance. SLB415 Beam Load Cells Cost Efficient Solution
SLB415 Load Cell Global Usage No Compromise on Performance Floor Scales Use the SLB415 load cell in platform and floor scales. Due to the hermetic welded design reliability in most industrial environments
More informationDMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
More informationMEDIUM VOLTAGE PRODUCT. KECA 80 C85 Current Sensor Instructions for installation, use and maintenance
MEDIUM VOLTAGE PRODUCT KECA 80 C85 Current Sensor Instructions for installation, use and maintenance 2 KECA 80 C85 CURRENT SENSOR INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE Scope of Contents 2
More informationVoltage limiting device HVL
Datasheet Voltage limiting device HVL 60-0.3 1 2 3 3 Equivalent circuit of voltage limiting device Type HVL 60-0.3 1 MO-surge arrester 2 Trigger electronics 3 Thyristor Product Description The HVL 60-0.3
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. AC200 Series Industrial 2-electrode conductivity cells with rapid temperature response
ABB MEASUREMENT & ANALYTICS DATA SHEET AC00 Series Industrial -electrode conductivity cells with rapid temperature response AC00 SE RIE S I N DUST RI AL -ELE C TRODE CONDU C TIV IT Y C E LLS DS/AC CO-E
More informationMB3600-CH30 Laboratory FT-NIR analyzer for biodiesel applications Suitable for production optimization and product quality assessment
Measurement & Analytics Measurement made easy MB3600-CH30 Laboratory FT-NIR analyzer for biodiesel applications Suitable for production optimization and product quality assessment FT-NIR optimizing productivity
More informationMEDIUM VOLTAGE PRODUCT. KECA 250 B1 Current Sensor Instructions for installation, use and maintenance
MEDIUM VOLTAGE PRODUCT KECA 250 B1 Current Sensor Instructions for installation, use and maintenance 2 KECA 80 C184; KECA 80 C216 CURRENT SENSORS INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE Scope
More informationWhen grids get smart ABB your partner for developing Smart Grids solutions
When grids get smart ABB your partner for developing Smart Grids solutions A transition from traditional to Smart Grids ABB`s commitment to Smart Grids The traditional power grid is based on centralized
More informationSR1 multipurpose enclosures Enclosures for automation and distribution applications
AU TO M AT I O N B OA R D S SR1 multipurpose enclosures Enclosures for automation and distribution applications Complete range of monobloc enclosures for small and mediumsize automation, command and distribution
More informationABB i-bus KNX Magnetic Contact EnOcean, 868 MHz MKE/A , 2CDG R0011
Technical Data 2CDC508163D0201 ABB i-bus KNX Device description The Magnetic Contact EnOcean is a surface mounted device for windows or doors. Its purpose is to recognize the opening or closing of windows
More informationEndura AZ10 Oxygen probe Sensor sub-assembly tested spares kit
Information INF15/166 EN Endura AZ10 Oxygen probe Sensor sub-assembly tested spares kit Measurement made easy 1 Introduction This publication details how to replace the sensor sub-assembly on an AZ10 oxygen
More informationManual motor starters Overview and benefits
Manual motor starters Overview and benefits ABB offers a complete standard motor-protection concept for the world market IEC motor branch protection UL type E/F Motor applications with fuseless protection
More informationABB cable glands SCG series Stainless Steel 316L, general purpose cable glands
1 TEHNIL DT SHEET cable glands SG series Stainless Steel 316L, general purpose cable glands Stainless steel cable glands for general purpose use, OEM, industrial and commercial applications, where a high
More informationCoriolisMaster FCB430, FCB450, FCH430, FCH450 Coriolis Mass Flowmeter
Change from one to two columns Spare Parts List SPL/FCB400-EN Rev. B CoriolisMaster FCB430, FCB450, FCH430, FCH450 Coriolis Mass Flowmeter Measurement made easy Contents 1 Safety instructions for repair
More informationTwinLine The new system of wall-mounting and floor-standing cabinets
04 2012 TwinLine The new system of wall-mounting and floor-standing cabinets 04 2012 TwinLine The new system of wall-mounting and floor-standing cabinets 2 2CPC 000 170 L0201 TwinLine The new system of
More informationKD45 ±20N. Description
KD45 ±20N The force sensor KD45 has the geometry of a miniature load cell. It is fastened on one side using the through holes ø3.2. There is a thread M3 for force transmission. Force transmission is displaced
More information1ZSC AAA EN, REV. 7. Transformer bushings type GSBK Technical guide
1ZSC563-AAA EN, REV. 7 Transformer bushings type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationVoltage limiting device HVL
Datasheet Voltage limiting device HVL 120-0.3 1 2 3 3 Equivalent circuit of voltage limiting device Type HVL 120-0.3 1 MO-surge arrester 2 Trigger electronics 3 Thyristor Product Description The HVL 120-0.3
More informationMEDIUM VOLTAGE PRODUCTS. Fault Current Limiters I S. -limiter and FC-Protector The worldʼs fastest switching devices
MEDIUM VOLTAGE PRODUCTS The worldʼs fastest switching devices 2 FAULT CURRENT LIMITERS THE WORLDʼ S FASTETST SWITCHING DEVICES The worldʼs fastest switching devices ABBʼs fault current limiters disconnect
More informationLoad Cell A special beam load cell has been developed by METTLER TOLEDO to meet hygienic criteria. Self draining and a mirror polish make it unique.
SWB805 MultiMount Hygienic Weigh Module Contamination-free with certified equipment Hygienic Design The SWB805 is NSF and GMP approved assuring compliance in food and pharmaceutical applications. The design
More informationABB MEASUREMENT & ANALYTICS DATA SHEET series ph and Redox (ORP) industrial dip electrode systems
ABB MEASUREMENT & ANALYTICS DATA SHEET 2867 series ph and Redox (ORP) industrial dip electrode systems 2 28 67 SE RIE S P H AN D R EDOX ( ORP) INDU STRIAL DIP E LE C TRODE SYSTE MS DS/28 67-E N RE V. F
More informationDMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
More information1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide
1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationEmergency-off application Manual motor starter MS116/MS132 Undervoltage release UA1
pplication description EN Emergency-off application Manual motor starter MS116/MS132 Undervoltage release U1 The emergency-off application allows machine and job safety for nominal currents up to 32 all
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More information0745A Load Cell. Global Usage Fully Approved for Accuracy and Safety. 0745A Beam Load Cell Fully Approved
0745A Load Cell Global Usage Fully Approved for Accuracy and Safety Floor Scales Use the 0745A load cell in platform and floor scales. Due to the hermetic welded design the 0745A is ideal for harsh environments
More informationXMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
More informationSU200M Datasheet. Branch protection acc. to CSA C22.2 No.5 / UL 489
MINIATURE CIRCUIT BREAKERS SU200M Datasheet Branch protection acc. to CSA C22.2 No.5 / UL 489 The miniature circuit breaker SU200 M is ABB s solution for UL 489 branch circuit protection up to 480 Y/277
More informationMB3600-HP10 Laboratory FT-NIR analyzer for hydrocarbon applications Pre-calibrated for blended gasoline, diesel, reformate and naphtha
Measurement & Analytics Measurement made easy MB3600-HP10 Laboratory FT-NIR analyzer for hydrocarbon applications Pre-calibrated for blended gasoline, diesel, reformate and naphtha Hydrocarbon Applications
More informationMEDIUM VOLTAGE PRODUCT. KECA 80 D85 Current Sensor Instructions for installation, use and maintenance
MEDIUM VOLTAGE PRODUCT KECA 80 D85 Current Sensor Instructions for installation, use and maintenance 2 KECA 80 D85 CURRENT SENSOR INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE Scope of Contents 2
More informationHLC A1... HLC B1... HLC F1...
HLC A1... HLC B1... HLC F1... Load cells Data Sheet Special features -- Hermetically sealed (IP68) -- Max. capacities: 220 kg... 10 t -- Stainless steel -- Low overall height -- Meets EMC/ESD requirements
More informationRedundancy unit CP-C.1-A-RU Accessory for CP-C.1 range power supplies
Data sheet Redundancy unit -A-RU Accessory for range power supplies ABB s redundancy units are used to establish true redundancy which increases the availability of electrical systems significantly. 2CDC
More informationZP2.5-PE Spring Terminal Block Ground
Technical Datasheet 1SNK162002D0201.indd 08/06/11 ZP2.5-PE Spring Terminal Block Ground Catalogue Page Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail
More informationProduct information. ECOSS Electronic compact starter for wound rotor drives
Product information ECOSS Electronic compact starter for wound rotor drives Controlled and safe start-up of wound rotor drives Electronic compact starters are used when slip-ring motors have to be started
More informationResistance Thermometers Model TR217, with Spring-Loaded Probe Tip
Electrical Temperature Measurement Resistance Thermometers Model TR217, with Spring-Loaded Probe Tip WIKA Data Sheet TE 60.22 Applications Temperature measurement at bearings of: T Pumps T Gears T Motors
More informationGas analyzers EL3060 The specialists for hazardous areas
Gas analyzers EL3060 The specialists for hazardous areas Compact and combinable the analyzers E ABB Analytical possesses decades of experience in the area of explosion protection. The EL3060 series unifies
More informationZX-Family Gas-insulated medium voltage switchgear
ZX-Family Gas-insulated medium voltage switchgear Durable and reliable Minimum overall costs Safety first ZX offers maximum economy Sealed gas compartments The compact design of the panels reduces the
More informationCompression load cell Inteco, converter Connexx, mounting kits PR 6001, PR 614x
Compression load cell Inteco, converter Connexx, mounting kits PR 6001, PR 614x The versatile, innovative weighing solution for silo and vessel weighing The load cell Inteco represents a consistent enhancement
More informationDMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet
More informationApplication The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
More informationManual motor starter magnetic only MO325
Data sheet Manual motor starter magnetic only MO325 Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF
More information