Data sheet: Wilo-TOP-Z 50/7 (3~400 V, PN 6/10, RG)

Transcription

1 Data sheet: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Pump curves Three-phase current H/m P1/W v,5 1 1,5 2 2,5 3 3,5 Wilo-TOP-Z 5/7 3~4 V - DN Dimension drawing DN 5 m/s Q/l/s Approved fluids (other fluids on request) Drinking water and water for foodprocessing companies in accordance with TrinkwV 21 (drinking water ordinance) Permitted field of application Temperature range for applications in domestic hot water circulation systems...+8, for short periods (2 h) at maximum ambient temperature of to +8 C) +4 C Temperature range for applications in domestic hot water circulation systems 11 C at ambient temperature of +4 C in short-term operation 2 h Max. permitted total hardness in 3.57 mmol/l (2 dh) domestic hot water circulation systems Maximum permissible operating pressure P max Special version for operating pressure, p max Pipe connections Flange 6/1 bar 16 bar Combination flange PN6/1 (PN 16 flange according to EN 192-2) Nominal flange diameter DN 5 Overall length l 28 mm Motor/electronics Emitted interference EN Interference resistance EN Protection class IP X4D Insulation class Mains connection H 3~4/23 V, 5 Hz Nominal motor power P 2 35 W Speed n 2 / 23 / 27 rpm Power consumption P 1 39 / 52 / 68 W Current at 1~23V I A Current at 3~23V I 1.19 / 1.6 / 2.38 A Current at 3~4V I.69 /.92 / 1.38 A Motor protection integrated Threaded cable connection PG 2x13.5 Materials Subject to change without prior notice. 5 Hz / 7

2 Data sheet: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Dimension drawing, flange Ø 165 Ø 125 Ø 11 Ø 99 DN 5 Pump housing Impeller Pump shaft Bearing Red brass (CC 499K) according to DIN in accordance with Drinking Water Ordinance Plastic (PPE - 3% GF) Stainless steel (X39CrMo17-1) Carbon, synthetic resin impregnated 4 x Ø14 4 x Ø Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 4 / 8 / 11 8 / 1 / 3 m C Information for order placements Make Wilo Type TOP-Z 5/7 Terminal diagram SSM L1 L2 L3 Art no Weight approx. m 19 kg SSM PE L1 L2 L3 Mains connection 3~4 V, 5 Hz 3~23 V, 5 Hz (with optional switching plug 3~23 V) Full motor protection with integrated trip electronics in terminal box for all speed stages Triggering:All-pole deactivation of motor by integrated trip electronics Reset: Manual reset at terminal box necessary Load capacity of the potential-free NC contact according to VDI 3814 for the collective fault signal (SSM) 1 A, 25 V ~ For function, see Wilo catalogue, chapter "Pump management Wilo-Control, consulting guide" Subject to change without prior notice. 5 Hz / 7

3 Dimensions and dimension drawings: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Dimension drawing DN Subject to change without prior notice. 5 Hz / 7

4 Pump curves: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Pump curves Three-phase current v,5 1 1,5 2 2,5 3 3,5 m/s H/m 7 Wilo-TOP-Z 5/7 3~4 V - DN P 1 /W Q/l/s Subject to change without prior notice. 5 Hz / 7

5 Ordering information: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Information for order placements Make Wilo Type TOP-Z 5/7 Art no EAN number Colour green/bronze Minimum order quantity 1 Minimum order quantity unit PCE Weight (net) kg 18.8 Length (net) mm 28 Width (net) mm 25 Height (net) mm 321 Weight (gross) kg 2.7 Length (gross) mm 43 Width (gross) mm 23 Height (gross) mm 29 Packaging type Packaging property Cardboard box Transport packaging Pieces per pallet 28 Number per layer 7 Subject to change without prior notice. 5 Hz / 7

6 Specification texts: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) This circulation pump is suitable only for drinking water. Can be used for domestic hot water circulation systems in the industry and building services. Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment. Equipment and function Manual power adjustment with 3 speed stages Pumps with 1~ motor: Pumps with 3~ motor: Fault signal light Contact for collective fault signal Direction of rotation indicator light Mains connection 3~, 23 V with optional switching plug Pump housing in bronze or grey cast iron (stainless steel depending on type) PN 6/PN 1 combination flange (for DN 4 to DN 65) Thermal insulation shells Additional functions by retrofittable Protect Module C: Dual pump management (two single pumps installed in parallel) Main/standby operation (automatic fault-actuated switchover/time-sensitive pump alteration) Materials Pump housing: Red brass (CC 499K) according to DIN in accordance with Drinking Water Ordinance Impeller: Plastic (PPE - 3% GF) Pump shaft: Stainless steel (X39CrMo17-1) Bearing: Carbon, synthetic resin impregnated Approved fluids (other fluids on request) Max. volume flow: 25. m 3 /h Max. delivery head: 7. m Pipe connections Nominal flange diameter: DN 5 Flange: Combination flange PN6/1 (PN 16 flange according to EN 192-2) Overall length: 28 mm Motor/electronics Emitted interference: EN Interference resistance: EN Protection class: IP X4D Insulation class: H Mains connection: 3~4/23 V, 5 Hz Max. speed: 27 / rpm23 / rpm2 rpm Speed: 2 / 23 / 27 rpm Nominal motor power: 35. W Power consumption 3~4 V: 39 / 52 / 68 W Current at 1~23V: A Current at 3~4V: 1.38 / A.92 / A.69 A Subject to change without prior notice. 5 Hz / 7

7 Specification texts: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Motor protection: integrated Threaded cable connection: 2x13.5 Information for order placements Art no.: EAN number: Weight approx.: 2.7 kg Make: Wilo Designation: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Subject to change without prior notice. 5 Hz / 7