Series description: Wilo-Drain STS 40
|
|
- Sarah Morris
- 5 years ago
- Views:
Transcription
1 Series description: Wilo-Drain STS H/m 12 Wilo-Drain STS Q/m³/h Design Submersible sewage pump Application Pumping of heavily contaminated fluids for: Domestic and site drainage Sewage disposal (pumping of sewage free of faeces) in accordance with DIN EN 125-2) Water management Environmental and water treatment technology Industrial and process engineering Type key e.g.: STS Wilo Drain STS /1 A Submersible pump Nominal diameter [mm] 1 Max. delivery head [m] A With float switch Special features/product advantages Attached float switch (A-model) enables easy operation Integrated pump base for easy installation Impeller made of stainless steel Low weight Technical data Mains connection: 1~23 V, 5 Hz or 3~ V, 5 Hz Immersed operating mode: S1 or S3 25% Protection class: IP 68 Insulation class: B Thermal winding monitoring Max. fluid temperature: 3 35 C Cable length: 1 m Free ball passage: mm Max. immersion depth: 5 m Equipment/function Ready-to-plug single-phase version A-model version including float switch Thermal motor monitoring Description/design Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation. Hydraulics The outlet on the pressure side is designed as vertical threaded connection Rp 1½. Vortex impellers are used as the impeller shapes. Motor Dry motors give off their heat directly to the surrounding fluid via the housing components and can be used in immersed state for permanent or intermittent operation. A sealing chamber protects the motor from fluid ingress. The filling fluid used is potentially biodegradable and environmentally safe. The single-phase AC motors are equipped with shockproof plugs, and A- model versions with float switches. The three-phase AC motors are equipped with bare cable ends. Sealing Sealing on the fluid side is achieved by a bidirectional mechanical seal, while sealing on the motor side is achieved by a rotary shaft seal. Materials Pump housing: EN-GJL-25 Pedestal: grey cast iron Impeller: stainless steel 1.31 Shaft: stainless steel 1. Mechanical seal on pump side: carbon/ceramic Shaft seal on motor side: Static gasket: Motor housing: stainless steel 1.31 Scope of delivery Pump ready for connection with 1 m connection cable For 1~23 V with shock-proof plug For 3~ V with bare cable end A-model version with attached float switch Installation and operating instructions Subject to change without prior notice. 5 Hz / 17
2 Series description: Wilo-Drain STS Accessories Non-return valve and gate valve Various pressure outlets and hoses Switchgears and relays Subject to change without prior notice. 5 Hz / 17
3 Duty chart: Wilo-Drain STS Duty chart H [m] Wilo-Drain STS 12 1 STS /1 8 STS / Q [m³/h] Subject to change without prior notice. 5 Hz / 17
4 Equipment/function: Wilo-Drain STS Design Submersible Single-channel impeller Vortex impeller Multi-channel impeller Open multi-channel impeller Macerator Turbulator Sealing chamber Leakage chamber Sealing by mechanical seal on motor side Sealing by rotary shaft seal on motor side Sealing by mechanical seal on fluid side AC motor Three-phase motor Direct activation Star-delta activation FC operation dry motor Motor with oil cooling Dry motor with closed-circuit cooling Application Wet well installation, stationary Wet well installation, portable Dry well installation, stationary Dry well installation, portable Equipment/function Motor leakage monitoring Sealing chamber monitoring Leakage chamber monitoring Motor temperature monitoring, bimetal PTC motor temperature monitoring Explosion protection Float switch Capacitor box for 1~23 V Ready-to-plug 1~ Materials Pump housing Impeller Motor housing = available, - = not available; = optional Version A integrated Cast iron Cast iron Stainless steel Subject to change without prior notice. 5 Hz 215- / 17
5 Product list: Wilo-Drain STS Pump type Mains connection Max. volume flow Max. delivery head Rated current Nominal motor power Max. immersion depth Art no. Q max / m 3 /h H max / m I N / A P 2 / kw STS /8-A 1~23 V, 5 Hz STS /8 1~23 V, 5 Hz STS /8 3~ V, 5 Hz STS /1-A 1~23 V, 5 Hz STS /1 1~23 V, 5 Hz STS /1 3~ V, 5 Hz Subject to change without prior notice. 5 Hz / 17
6 Data sheet: Wilo-Drain STS /8-A (1~23 V) Pump curves Wilo-Drain STS - 5 Hz - No. of poles: 2 H [m] 12 Unit Max. delivery head H max 8. m 1 STS /1 ø = mm Max. volume flow Q max 15. m 3 /h 8 STS /8 Pressure connection R 1½ 6 Maximum operating pressure p max 2 bar Free ball passage mm 2 Operating mode (immersed) S Q [m³/h] Pump curves in accordance with ISO 996, Appendix A Operating mode (non-immersed) Max. immersion depth 5 m Dimension drawing Wilo-Drain STS /8-A (1~23V) Protection class IP 68 Fluid temperature T C Weight approx. m 2.2 kg 81,6 Motor data Mains connection 1~23 V, 5 Hz Rated current I N 3.6 A Nominal motor power P 2.6 kw Rp 1½ 52, Power consumption P 1.8 kw Power factor cos.99 φ 87 Activation type Direct Nominal speed n 29 rpm 29 No. of poles 2 Insulation class B Recommended switching frequency 2 1/h Max. switching frequency 5 1/h Permitted voltage tolerance ±1 % Cable Length of connecting cable Cable type 1 m H7RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller 1.31 [AISI3] Subject to change without prior notice. 5 Hz / 17
7 Data sheet: Wilo-Drain STS /8-A (1~23 V) Sealing on motor side Mechanical seal Carbon/ceramic Motor housing 1.31 Pump housing Pump shaft EN-GJL [AISI316L] Information for order placements Make Wilo Art no EAN number Price group PG7 Subject to change without prior notice. 5 Hz / 17
8 Data sheet: Wilo-Drain STS /8 (1~23 V) Pump curves Wilo-Drain STS - 5 Hz - No. of poles: 2 H [m] 12 Unit Max. delivery head H max 8. m 1 STS /1 ø = mm Max. volume flow Q max 15. m 3 /h 8 STS /8 Pressure connection R 1½ 6 Maximum operating pressure p max 2 bar Free ball passage mm 2 Operating mode (immersed) S Q [m³/h] Pump curves in accordance with ISO 996, Appendix A Operating mode (non-immersed) Max. immersion depth 5 m Dimension drawing Wilo-Drain STS /8 (1~23V) Protection class IP 68 Fluid temperature T C Weight approx. m 2. kg 81,6 Motor data Mains connection 1~23 V, 5 Hz Rated current I N 3.6 A Nominal motor power P 2.6 kw Rp 1½ 52, Power consumption P 1.8 kw Power factor cos.99 φ 87 Activation type Direct Nominal speed n 29 rpm 29 No. of poles 2 Insulation class B Recommended switching frequency 2 1/h Max. switching frequency 5 1/h Permitted voltage tolerance ±1 % Cable Length of connecting cable Cable type 1 m H7RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller 1.31 [AISI3] Subject to change without prior notice. 5 Hz / 17
9 Data sheet: Wilo-Drain STS /8 (1~23 V) Sealing on motor side Mechanical seal Carbon/ceramic Motor housing 1.31 Pump housing Pump shaft EN-GJL [AISI316L] Information for order placements Make Wilo Art no EAN number Price group PG7 Subject to change without prior notice. 5 Hz / 17
10 Data sheet: Wilo-Drain STS /1-A (1~23 V) Pump curves Wilo-Drain STS - 5 Hz - No. of poles: 2 H [m] 12 Unit Max. delivery head H max 1. m 1 STS /1 ø = mm Max. volume flow Q max 2. m 3 /h 8 STS /8 Pressure connection R 1½ 6 Maximum operating pressure p max 2 bar Free ball passage mm 2 Operating mode (immersed) S Q [m³/h] Pump curves in accordance with ISO 996, Appendix A Operating mode (non-immersed) Max. immersion depth 5 m Dimension drawing Wilo-Drain STS /1-A (1~23V) Protection class IP 68 Fluid temperature T C Weight approx. m 2.2 kg 81,6 Motor data Mains connection 1~23 V, 5 Hz Rated current I N.5 A Nominal motor power P 2.75 kw Rp 1½ 51, Power consumption P 1 1. kw Power factor cos.97 φ 88 Activation type Direct Nominal speed n 29 rpm 25 No. of poles 2 Insulation class B Recommended switching frequency 2 1/h Max. switching frequency 5 1/h Permitted voltage tolerance ±1 % Cable Length of connecting cable Cable type 1 m H7RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller 1.31 [AISI3] Subject to change without prior notice. 5 Hz / 17
11 Data sheet: Wilo-Drain STS /1-A (1~23 V) Sealing on motor side Mechanical seal Carbon/ceramic Motor housing 1.31 Pump housing Pump shaft EN-GJL [AISI316L] Information for order placements Make Wilo Art no EAN number Price group PG7 Subject to change without prior notice. 5 Hz / 17
12 Data sheet: Wilo-Drain STS /1 (1~23 V) Pump curves Wilo-Drain STS - 5 Hz - No. of poles: 2 H [m] 12 Unit Max. delivery head H max 1. m 1 STS /1 ø = mm Max. volume flow Q max 2. m 3 /h 8 STS /8 Pressure connection R 1½ 6 Maximum operating pressure p max 2 bar Free ball passage mm 2 Operating mode (immersed) S Q [m³/h] Pump curves in accordance with ISO 996, Appendix A Operating mode (non-immersed) Max. immersion depth 5 m Dimension drawing Wilo-Drain STS /1 (1~23V) Protection class IP 68 Fluid temperature T C Weight approx. m 2. kg 81,6 Motor data Mains connection 1~23 V, 5 Hz Rated current I N.5 A Nominal motor power P 2.75 kw Rp 1½ 51, Power consumption P 1 1. kw Power factor cos.97 φ 88 Activation type Direct Nominal speed n 29 rpm 25 No. of poles 2 Insulation class B Recommended switching frequency 2 1/h Max. switching frequency 5 1/h Permitted voltage tolerance ±1 % Cable Length of connecting cable Cable type 1 m H7RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller 1.31 [AISI3] Subject to change without prior notice. 5 Hz / 17
13 Data sheet: Wilo-Drain STS /1 (1~23 V) Sealing on motor side Mechanical seal Carbon/ceramic Motor housing 1.31 Pump housing Pump shaft EN-GJL [AISI316L] Information for order placements Make Wilo Art no EAN number Price group PG7 Subject to change without prior notice. 5 Hz / 17
14 Data sheet: Wilo-Drain STS /8 (3~ V) Pump curves Wilo-Drain STS - 5 Hz - No. of poles: 2 H [m] 12 Unit Max. delivery head H max 8. m 1 STS /1 ø = mm Max. volume flow Q max 15. m 3 /h 8 STS /8 Pressure connection R 1½ 6 Maximum operating pressure p max 2 bar Free ball passage mm 2 Operating mode (immersed) S Q [m³/h] Pump curves in accordance with ISO 996, Appendix A Operating mode (non-immersed) Max. immersion depth 5 m Dimension drawing Wilo-Drain STS /8 (3~V) Protection class IP 68 Fluid temperature T C Weight approx. m 2. kg 81,6 Motor data Mains connection 3~ V, 5 Hz Rated current I N 1.7 A Rp 1½ 52, Nominal motor power P 2.6 kw Power consumption P 1.8 kw Activation type Direct 87 Nominal speed n 29 rpm No. of poles 2 29 Insulation class Recommended switching frequency 2 1/h B Max. switching frequency 5 1/h Permitted voltage tolerance ±1 % Cable Length of connecting cable Cable type 1 m H7RN-F Cable cross-section G1 mm 2 Type of connecting cable Mains plug Detachable Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side 1.31 [AISI3] Subject to change without prior notice. 5 Hz / 17
15 Data sheet: Wilo-Drain STS /8 (3~ V) Mechanical seal Carbon/ceramic Motor housing 1.31 Pump housing Pump shaft EN-GJL [AISI316L] Information for order placements Make Wilo Art no EAN number Price group PG7 Subject to change without prior notice. 5 Hz / 17
16 Data sheet: Wilo-Drain STS /1 (3~ V) Pump curves Wilo-Drain STS - 5 Hz - No. of poles: 2 H [m] 12 Unit Max. delivery head H max 1. m 1 STS /1 ø = mm Max. volume flow Q max 2. m 3 /h 8 STS /8 Pressure connection Rp 1½ 6 Maximum operating pressure p max 2 bar Free ball passage mm 2 Operating mode (immersed) S Q [m³/h] Pump curves in accordance with ISO 996, Appendix A Operating mode (non-immersed) Max. immersion depth 5 m Dimension drawing Wilo-Drain STS /1 (3~V) Protection class IP 68 Fluid temperature T C Weight approx. m 2. kg 81,6 Motor data Mains connection 3~ V, 5 Hz Rated current I N 2. A Rp 1½ 51, Nominal motor power P 2.75 kw Power consumption P 1.92 kw Activation type Direct 88 Nominal speed n 29 rpm No. of poles 2 25 Insulation class Recommended switching frequency 2 1/h B Max. switching frequency 5 1/h Permitted voltage tolerance ±1 % Cable Length of connecting cable Cable type 1 m H7RN-F Cable cross-section G1 mm 2 Type of connecting cable Mains plug Detachable Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side 1.31 [AISI3] Subject to change without prior notice. 5 Hz / 17
17 Data sheet: Wilo-Drain STS /1 (3~ V) Mechanical seal Carbon/ceramic Motor housing 1.31 Pump housing Pump shaft EN-GJL [AISI316L] Information for order placements Make Wilo Art no EAN number Price group PG7 Subject to change without prior notice. 5 Hz / 17
Series description: Wilo-Drain MTC
H/m Series description: Wilo-Drain MTC Wilo-Drain MTC 50 40 30 20 10 0 Design Submersible sewage pump with external macerator for intermittent and permanent operation, made of grey cast iron for stationary
More informationDewatering Submersible sewage pumps
Series description Wilo-Drain TP 80/TP 100 Equipment/function Thermal motor monitoring Leakage detection in the motor ATEX-certified Sheath current cooling Materials Pump housing: PUR Impeller: PUR Shaft:
More informationData sheet: Wilo-Drain TP 65 F 109/22 (3~400 V)
Data sheet: Wilo-Drain TP 65 F 109/22 (3~400 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - No. of poles: 2 Unit Max. delivery head H max 14.5 m Max. volume flow Q max 52.0 m 3 /h Optimal delivery head H
More informationSeries description: Wilo-Drain TM/TMW/TMR 32
Series description: Wilo-Drain TM/TMW/TMR 32 H[m] 10 Wilo-Drain TM /TMR /TMW 32 8 6 TM 32/7 4 TM 32/8 TMW 32/8 2 TMW 32/11 TMR 32/8 TMR 32/11 0 0 2 4 6 8 10 12 Q[m³/h] Design Basement drainage pump, water-cooled
More informationData sheet: Wilo-Drain TP 65 F 91/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 36 m 3 /h Optimal delivery head H opt 6.0 m Optimum
More informationSewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
More informationSeries description: Wilo-Drain TM/TMW/TMR 32
Series description: Wilo-Drain TM/TMW/TMR 32 H[m] 10 Wilo-Drain TM /TMR /TMW 32 8 6 TM 32/7 4 TM 32/8 TMW 32/8 2 TMW 32/11 TMR 32/8 TMR 32/11 0 0 2 4 6 8 10 12 Q[m³/h] Design Basement drainage pump, water-cooled
More informationSeries description: Wilo-DrainLift KH 32
Series description: Wilo-DrainLift KH 32 H[m] Wilo-DrainLift KH 32 4 3 2 1 Design Small sewage lifting unit (floor-mounted installation) Application Sewage lifting unit ready for connection for limited
More informationData sheet: Wilo-Economy MHI 202 (3~400 V, EPDM)
Data sheet: Wilo-Economy MHI 22 (3~4 V, EPDM) Pump curves P 2 [kw] NPSH [m] H[m] 7 26 Wilo-Economy-MHI 22-26 5 Hz 6 25 5 24 4 3 23 2 22,5,5 2 2,5 3 3,5 4 4,5 5 5,5,5,5 [l/s] 5 5 4 4 3 3 2 2 NPSH,5,5 2
More informationSeries description: Wilo-Sub TWI 6-..-B
Series description: Wilo-Sub TWI 6-..-B Design Submersible pump, multistage Application For water and potable water supply from boreholes and rainwater storage tanks Process water supply For municipal
More informationDrainage and Sewage Wastewater Transport and Dewatering
Pioneering for You Catalogue Water Management 4/5 Drainage and Sewage Wastewater Transport and Dewatering Contents General notes and abbreviations 8 Submersible pumps for untreated sewage Submersible
More informationData sheet: Wilo-CronoLine-IL 125/210-5,5/4
Data sheet: Wilo-CronoLine-IL 15/1-5,5/ Pump curves -pole, 5 Hz H[m] 18 16 1 1 1 8 6 P [kw] 8 1 16 6 Qmin IL 15/-5,5/ IL 15/1-5,5/ IL 15/19-/ Wilo-CronoLine-IL 15/ - Wilo-CronoLine-IL 15/19 IL 15/-7,5/
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationData sheet: Wilo-VeroLine-IPL 100/ /4
Data sheet: Wilo-VeroLine-IPL 1/145-1.5/4 Pump curves 4-pole, 5 Hz H[m] Qmin 1 8 Wilo-VeroLine-IPL 1/175 - Wilo-VeroLine-IPL 1/135 Approved fluids (other fluids on request) Heating water (in accordance
More informationData sheet: Wilo-CronoLine-IL 65/160-5,5/2
Data sheet: Wilo-CronoLine-IL 65/16-5,5/2 Pump curves 2-pole, 5 Hz H[m] 45 4 35S 3 25 2 15 1 5 P 2 [kw] 12 2 4 6 8 1 Q[m³/h] 8 4 Qmin IL 65/16-5,5/2 IL 65/17-11/2 IL 65/15-5,5/2 Wilo-CronoLine-IL 65/17
More informationData sheet: Wilo-VeroLine-IPL 65/ /2
Data sheet: Wilo-VeroLine-IPL 65/145-5.5/2 Pump curves 2-pole, 5 Hz H[m] 3 25 15 5 Qmin IPL 65/155-5,5/2 Wilo-VeroLine-IPL 65/155 - Wilo-VeroLine-IPL 65/145 IPL 65/145-5,5/2 IPL65/155-7,5/2 5 3 4 5 6 7
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More informationData sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
More informationData sheet: Wilo-CronoLine-IL 65/130-4/2
Data sheet: Wilo-CronoLine-IL 65/13-4/2 Pump curves 2-pole, 5 Hz H[m] 32 28 24 I 2 I 16 12 8 4 2 4 6 8 1 5 1 15 2 25 3 Q[l/s] P 2 [kw] Ø 14 6 Ø 127 4L Ø 117 2 Ø 18 2 4 6 8 1 η p[%] Qmin IL 65/14-5,5/2
More informationData sheet: Wilo-CronoLine-IL 50/200-1,5/4
Data sheet: Wilo-CronoLine-IL 5/2-1,5/4 Pump curves 4-pole, 5 Hz H[m] 18 16 14 12 1 8 6 4 2 1 2 3 4 5 4 8 12 Q[l/s] P 2 [kw] Ø 28 1,5 Ø 197 1,,5 1 2 3 4 5 η p[%] Qmin Wilo-CronoLine-IL 5/22 - Wilo-CronoLine-IL
More informationData sheet: Wilo-CronoLine-IL 50/120-2,2/2
Data sheet: Wilo-CronoLine-IL 5/12-2,2/2 Pump curves 2-pole, 5 Hz H[m] 28 24 2 Qmin IL 5/14-3/2 IL 5/13-3/2 Wilo-CronoLine-IL 5/14 - Wilo-CronoLine-IL 5/11 IL 5/14-4/2 Approved fluids (other fluids on
More informationData sheet: Wilo-CronoLine-IL 80/145-1,1/4
Data sheet: Wilo-CronoLine-IL 8/145-1,1/4 Pump curves 4-pole, 5 Hz H[m] 12 1 8 6 4 2 2 4 6 8 1 5 1 15 2 25 3 P 2 [kw] 2, 1,5 Ø 156 1, Ø 144,5 Ø 133 2 4 6 8 1 η p[%] Qmin IL 8/17-2,2/4 IL 8/16-1,5/4 IL
More informationData sheet: Wilo-VeroLine-IPL 65/ /2
Data sheet: Wilo-VeroLine-IPL 65/115-1.5/2 Pump curves 2-pole, 5 Hz H[m] 16 14 12 1 8 6 4 2 1 2 3 4 5 2 4 6 8 1 12 14 16 P 2 [kw] 1,6 1,2,8,4 1 2 3 4 5 η p[%] 8 6 Qmin 4 2 1 2 3 4 5 Dimension drawing 8
More informationData sheet: Wilo-VeroTwin-DPL 65/ /2
Data sheet: Wilo-VeroTwin-DPL 65/175-5.5/2 Pump curves 2-pole - individual operation H[m] 35 3 25 2 Qmin DPL 65/175-5,5/2 Wilo-VeroTwin-DPL 65/175 - Wilo-VeroTwin-DPL 65/165 DPL 65/175-7,5/2 DPL 65/165-5,5/2
More informationData sheet: Wilo-CronoLine-IL 100/250-5,5/4
Data sheet: Wilo-CronoLine-IL 1/25-5,5/ Pump curves -pole, 5 Hz H[m] 2 2 16 Qmin IL 1/25-5,5/ IL 1/26-7,5/ Wilo-CronoLine-IL 1/27 - Wilo-CronoLine-IL 1/25 IL 1/27-11/ IL 1/26-11/ Approved fluids (other
More informationData sheet: Wilo-CronoLine-IL 40/220-1,5/4
Data sheet: Wilo-CronoLine-IL 4/22-1,5/4 Pump curves 4-pole, 5 Hz H[m] 2 18 16 14 12 1 8 6 4 2 P 2 [kw] 5 1 15 2 25 1 2 3 4 5 6 7 8 1,2 Ø 22,8,4 5 1 15 2 25 η p[%] 6 4 2 Qmin 5 1 15 2 25 Dimension drawing
More informationData sheet: Wilo-VeroTwin-DPL 40/ /4
Data sheet: Wilo-VeroTwin-DPL 4/13-.2/4 Pump curves 4-pole - individual operation H[m] 8 7 6 4 3 2 1 P 2 [kw],4,2 η p[%] 6 4 2 1 2 3 4 6 7 Qmin Pump curves Wilo-VeroTwin-DPL 4/16 - Wilo-VeroTwin-DPL 4/13
More informationSeries description: Wilo-MultiCargo MC
1 88 / Series description: -MultiCargo MC 5 -MultiCargo MC 3../.. 3 1 MC 35 MC 3 MC 5 MC Design Self-priming multistage centrifugal pumps Application Water supply Sprinkling Irrigation and spraying utilisation
More informationSeries description: Wilo-MultiCargo FMC
Series description: -MultiCargo MC H/m MC 5 MC -MultiCargo MC 3../.. Design Self-priming water-supply unit Application Water supply Sprinkling Irrigation and spraying Rainwater utilisation Type key Example:
More informationData sheet: Wilo-CronoTwin-DL 65/250-4/4
Data sheet: Wilo-CronoTwin-DL 65/25-/ Pump curves -pole - individual operation H[m] 2 2 2 Qmin DL 65/25-3/ Wilo-CronoTwin-DL 65/27 - Wilo-CronoTwin-DL 65/25 DL 65/25-/ DL 65/27-5,5/ Approved fluids (other
More informationPressure boosting Single pumps
Series description Wilo-Economy MHI Design Non-self-priming multistage pump Application Water supply and Commerce and industry Cooling water circulation systems Washing and sprinkling systems Type key
More informationData sheet: Wilo-CronoNorm-NL 150/315-37/4
Data sheet: Wilo-CronoNorm-NL 15/315-37/4 Pump curves 4 8 1 16 4Q/US gpm H/m Wilo-CronoNorm-NL 15/315 H/ft 145 1/min 14 5 Hz 4 55% 6% 65% 7% 75% 78% 8% 1 8% 35 Eff. 84,8% 83,9% 3 8% 1 8% 8,1% 78% 8,8%
More informationData sheet: Wilo-VeroTwin-DPL 50/ /4
Data sheet: Wilo-VeroTwin-DPL 5/6-.55/ Pump curves -pole - individual operation H[m] 7 6 5 P [kw],6,, η p[%] 6 Qmin Wilo-VeroTwin-DPL 5/6 - Wilo-VeroTwin-DPL 5/ DPL 5/-,7/ DPL 5/6-,55/ 6 Ø 7 Pump curves
More informationSeries description: Wilo-Stratos ECO-STG
Series description: ()- Design Glandless circulation pump with threaded connection, EC motor and automatic power adjustment Application Primary circuits of solar and geothermal systems Type key Example:
More informationSeries description: Wilo-TOP-S
H[m] Series description: Wilo-TOP-S Wilo-TOP-S 16 1 14 12 6 3 6 1 4 8 6 8 6 6 8/ 1 1 4 8/ 4 7 / 7 /4 /4 2 Q[m³/h] 1 2 3 4 6 Equipment/function Operating modes Speed-stage switching Manual functions Setting
More informationData sheet: Wilo-TOP-Z 30/10 (1~230 V, PN 10, RG)
Data sheet: Wilo-TOP-Z 3/1 (1~23 V, PN 1, RG) Pump curves Single-phase current H/m 9 8 v,5 1 1,5 2 2,5 3 m/s Wilo-TOP-Z 3/1 1~23V - Rp 1¼ Approved fluids (other fluids on request) Drinking water and water
More informationData sheet: Wilo-VeroLine-IPH-W 65/ /4
Data sheet: Wilo-VeroLine-IPH-W 65/1-1.1/ Pump curves 9 8 7 6 v,5 1, 1,5,,5 65/16 1,1/ [m/s] Wilo-VeroLine IPH-O / IPH-W 65/16-65/15 Approved fluids (other fluids on request) Heating water (in accordance
More informationData sheet: Wilo-TOP-S 40/10 (1~230 V, PN 6/10)
Data sheet: Wilo-TOP-S 4/1 (1~23 V, PN 6/1) Pump curves Single-phase current H/m 1 8 v 1 2 3 4 Wilo-TOP-S 4/1 1~23 V - DN 4 5m/s p/kpa 1 8 Approved fluids (other fluids on request) Heating water (in accordance
More informationData sheet: Wilo-TOP-Z 30/7 (3~400 V, PN 10, RG)
Data sheet: Wilo-TOP-Z 3/7 (3~4 V, PN 1, RG) Pump curves Three-phase current H/m 5 4 v,5 1 1,5 2 2,5 Wilo-TOP-Z 3/7 3~4 V - Rp 1¼ m/s Approved fluids (other fluids on request) Drinking water and water
More informationData sheet: Wilo-Stratos PICO 25/
Data sheet: Wilo-Stratos PICO 25/1-4-13 Pump curves Δp-c (constant) 1 2 p-c v 3 4 5 Rp ½,4,8 1,2 1,6 Rp 1m/s,2,4,6,8 1, 1,2 Rp 1¼ H/m 4, Wilo-Stratos PICO 15/1-4, 25/1-4, 3/1-4 1~23 V - Rp ½, Rp 1, Rp
More informationDP A.2.50B. Grundfos pump GRUNDFOS DATA BOOKLET
GRUNDFOS DATA BOOKLET DP10.65.26.A.2.50B Grundfos pump 96106544 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/dpfam/96106544/dp10-65-26-a-2-50b.html
More informationData sheet: Wilo-Yonos PICO 25/
Data sheet: Wilo-Yonos PICO 25/1-5-13 Pump curves H/m 5 4 3 2 1,4,8 1,2 1,6,5 1, 1,5 2, 2,5 3,,2,4,6,8 2 4 6 8 1 P 1/W 3 2 1 4m p-c Wilo-Yonos PICO 25/1-5 1~23 V - Rp 1,5 1, 1,5 2, 2,5 3, Pump curves H/m
More informationData sheet: Wilo-TOP-S 40/4 (1~230 V, PN 6/10)
Data sheet: Wilo-TOP-S 4/4 (1~23 V, PN 6/1) Pump curves Single-phase current H/m 4 3 v,5 1, 1,5 2, 2,5 3, Wilo-TOP-S 4/4 1~23 V - DN 4 m/s Approved fluids (other fluids on request) Heating water (in accordance
More informationDesign details Design. Installation types. Shaft seal. Impeller type. Drive. Bearings
ma-porter ode Description Starting aid 1) Without start capacitor With start capacitor 5 Size 5 DN 6 DN 65 01 Impeller size SE Motor version SE Single-phase motor with float switch NE Single-phase motor
More informationData sheet: Wilo-Stratos PICO 25/1-6
Data sheet: Wilo-Stratos PICO 25/1-6 Pump curves Δp-c (constant) 5 4 v 1 2 3 4 5 6,5 1, p-c Rp ½ 1,5 2, Rp 1 m/s,4,8 1,2 1,6 Rp 1¼ H/m Wilo-Stratos PICO 15/1-6, 25/1-6, 3/1-6 6 1~23 V - Rp ½, Rp 1, Rp
More informationElectric submersible pumps SEMISOM for sewage water
40 SEMISOM Electric submersible pumps SEMISOM pplication - To convey waste and sewage water from septic tanks; - To drain rain water; - To pump liquids containing solids and filaments; - To pump sewage
More informationPriox. The new range NOCCHI. Lenntech NOCCHI. Tel Fax waste water treatment
NOCCHI Lenntech info@lenntech.com Tel. +31-152-1-9 www.lenntech.com Fax. +31-152-1-289 The new range NOCCHI Priox waste water treatment submersible vortex pumps for waste water Nocchi Priox Submersible
More informationVX-ST VORTEX. Submersible pumps in stainless steel. PERFORMANCE RANGE Flow rate up to 650 l/min (39 m³/h) Head up to 15 m
VX-ST Submersible pumps in stainless steel VORTEX Sewage water Domestic use Civil use Industrial use PERFORMANCE RANGE Flow rate up to 60 l/min (9 m³/h) Head up to m APPLICATION LIMITS m maximum immersion
More informationData sheet: Wilo-TOP-Z 50/7 (3~400 V, PN 6/10, RG)
Data sheet: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Pump curves Three-phase current H/m 7 6 5 4 3 2 1 P1/W 6 4 2 v,5 1 1,5 2 2,5 3 3,5 Wilo-TOP-Z 5/7 3~4 V - DN 5 1 2 3 4 5 6 7 Dimension drawing 66 66 DN 5
More informationSubmersible Stainless Steel Semi-Vortex Pumps Pumps
Technical Data Right Submersible Stainless Steel Semi-Vortex Pumps Pumps EBARA PUMPS AUSTRALIA PTY. LTD. DWVOX_Techdata_SS_ Right_Techdata_DS_ CONTENTS -SPECIFICATIONS Page Features & Applications 100
More informationSL B. Grundfos pump GRUNDFOS DATA BOOKLET
GRUNDFOS DATA BOOKLET SL1.50.65.09.2.50B Grundfos pump 96106566 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sl1000/96106566/sl1-50-65-09-2-50b.html
More informationPumps stations and solids separation systems
Sewage catalogue Pumps stations and solids separation systems Pumps stations Submersible sewage pumps with macerators Solids separation systems Accessories Catalogue C 3.1-50 Hz - 2010 C3.1 Programme overview
More informationELECTRIC SUBMERSIBLE PUMPS SEMISOM/80
Electric pumps for professional applications to convey sewage water, entirely designed and manufactured in our Italian facility. APPLICATION PERFORMANCE RANGE To convey waste and sewage water from septic
More informationSEV D. Grundfos Pump GRUNDFOS DATA BOOKLET
GRUNDFOS DATA BOOKLET SEV.6.6...1D Grundfos Pump 96779 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sev/96779/sev-6-6---1d.html
More informationHigh pressure centrifugal pumps
Series description H[ft] 5 5 4 8 Wilo-Multivert-MVIS 6 Hz - North America Q[m³/h] H[m] 5 4 MVIS 5 MVIS MVIS 5 5 4 6Q[US g.p.m.] 8 6 Pump series Wilo-Multivert MVIS 5..,.., 5.. Design Non-self priming multistage
More informationSPECIFICATION PUMP. DW - G 2 UNI ISO 228 Flange
SPECIFICATION PUMP Type of liquid Dirty water, sewage water Liquid Max temperature [ C] 40 Handled Max solids size [mm] 50 spherical Maximum immersion [m] 7 Single channel (DW) Impeller Vortex (DW VOX)
More information- continuos running: max ±5%. - intermittent running: max ±10%. Voltage imbalance between phases: max 2%. Maximum number of starts per hour: 30.
Submersible Electric Pumps GLS Series MARKET SECTORS RESIDENTIAL AND COMMERCIAL BUILDINGS, INDUSTRIES. APPLICATIONS Submersible pump for pumping clean water, surface water and wastewater containing solids
More informationTRITUS. Submersible pumps with grinder
TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART DW 204 PERFORMANCE CHART DW VOX 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART DW 204 PERFORMANCE CHART DW VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS
More informationSDL i MACERATING SUBMERSIBLE PUMPS
OPERATING LIMITS Flow up to: 6 m 3 /h Head up to: 36 m Max. particle size: 6 mm DN of discharge port: Protection index: 68 SDL i MACERATING SUBMERSIBLE PUMPS Lifting of waste water Commercial pole - 5
More informationSUBMERSIBLE PUMP RANGE
SUBMERSIBLE PUMP RANGE www.vegapumps.co.za INDEX VXM / VX SUBMERSIBLE PUMP... 4 PERFORMANCE DATA... 5 V RANGE SCREENED SWAGE SUBMERSIBLE PUMP... 6 PERFORMANCE DATA... 7 DIMENSIONAL DRAWING... 9 C-SERIES
More information5" SUBMERSIBLE PUMPS. by Franklin Electric
5" SUBMERSIBLE PUMPS INDEX NAUTI VN 5" Submersible Pumps... 2 General Product Curves... 3 Material Table... 3 Technical Data and Performance Curves VN 3..................................................................................................
More informationJUNG PUMPEN MULTICUT SEWAGE PUMPS
APPLICATION Centrifugal submersible sewage pumps fitted with the MultiCut cutting system are used as stationary appliances for backpressure protection of detached houses. They are suitable for pumping
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More informationFVO. SUBMERSIBLE PUMPS Lifting of polluted water Commercial use 4 pole - 50 Hz OPERATING LIMITS APPLICATIONS BENEFITS SPECIFICATIONS
OPERATNG LMTS Flows rates up to: 2m 3 /h Heads up to: 1m Max. immersion: 1m Max. particle size: Ø 75 and 1 mm* ND of discharge: 8/1 mm* Protection index: P 8 * depending on the model SUBMERSBLE PUMPS Lifting
More informationElectric submersible pumps SEMISOM for sewage water
pplication - To convey waste and sewage water from septic tanks; - To drain rain water; - To pump liquids containing solids and filaments; - To pump sewage water even through pipes with reduced diameter
More informationLIFTSON M-LIX L. LIFT-PUMP MODULES Domestic waste water 50 Hz Complies with standard EN RANGE OF APPLICATION APPLICATIONS ADVANTAGES
RANGE OF APPLICATION Flows up to: 40 m 3 /h Manometric head up to: 22 m Maximum water temperature: + 3 à 40 C Particle size: 45 mm Inlet pipe: DN 40/50/100/150 Outlet: DN 80 Vent: DN 70 LIFTSON M-LIX L
More informationTechnical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD.
Technical Data DML Submersible Sewage s with Single Channel Impeller AUSTRALIA PTY. LTD. DML_Techdata_SS_V Contents -SPECIFICATIONS FEATURES & APPLICATIONS TYPICAL EXPLODED VIEW SPECIFICATIONS SELECTION
More informationSE M.C.N.51D
GRUNDFOS DATA BOOKLET SE1.110.200.200.4.52M.C.N.51D Grundfos pump 98179813 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/seslfam/98179813/se1-110-200-200-4-52m-c-n-51d.html
More informationJUNG PUMPEN US SUBMERSIBLE DRAINAGE PUMPS
APPLICATION The centrifugal submersible drainage pumps US 62-251 can be used wherever sewage water with solids up to 10 mm particle size occurs, e.g. in collecting sumps for ground water, or in permanent
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL SEAL 301
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DW 203 PERFORMANCE CURVE DW VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationGY/UY GRINDER / VORTEX SERIES
www.tsurumi.eu GY/UY GRINDER / VORTEX SERIES Selection Table Motor Output (kw) GY 2" 50mm GYMK 2" 50mm 0.9 1.1 1.5 1.6 1.8 1.9 3.1 3.7 4.4 6.4 9.5 Motor Output (kw) 4" 100mm UY 6" 150mm 4" 100mm UYMK 6"
More informationPosition Qty. Description Single Price 1 SEV B
Position Qty. Description Single Price 1 SEV.8.8.7.2.B Product No.: 964747 Note! Product picture may differ from actual product Highly advanced pumps with many unique features. The Grundfos SEV ranges
More informationJUNG PUMPEN COMPLI 1500 / 2500 SEWAGE LIFTING STATIONS
APPLICATION The compli 1500 and 2500 tank systems have been designed for large industrial and communal wastewater volumes as well as for the connection of streets or other community effluent systems. In
More information50Hz. water solutions. E SerieS DGE DRE GRE APE
Hz water solutions E SerieS DGE DRE GRE APE D a t a b o o k l e t EN water solutions E SerieS DGE DRE GRE APE Hz D a t a b o o k l e t E SERIES E Series General characteristics AISI 4 stainless steel
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE RIGHT PERFORMANCE CURVE RIGHT
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 75 204 PERFORMANCE CURVE 100 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 TYPE KEY 202 PERFORMANCE CHART DW 203 PERFORMANCE CHART DW VOX 204
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 TYPE KEY 202 PERFORMANCE CHART DW 203 PERFORMANCE CHART DW VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 SINGLE
More informationAGA-AGC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00 205 PERFORMANCE CURVE
More informationFlygt 3153, 50Hz. Technical Specification
Flygt 3153, 5Hz Technical Specification Table of Contents Table of Contents F-pump, Standard Motor... Product description... Motor rating and performance curves...4 F-pump, Premium Efficiency Motor (IE3)...
More informationDGN. Set-back Vortex impeller. electrical submersible pumps. General characteristics
PRODU AALOGUE Set-back Vortex impeller General characteristics Set-back Vortex impeller,, kw motor power / / 6 poles GAS / vertical DN65 DN50 PN0-6 horizontal max 50 mm free passage Electromechanical assembly
More informationSeries description: Wilo-TOP-STGD
ATAC Solutions 1622 8824 / Series description: Wilo-TOP-STGD Wilo-TOP-STGD 15 4/ 1 5 Design Glandless double circulation pump with flange connection. Application Primary circuits of solar and geothermal
More informationELECTRIC SUBMERSIBLE SIBLE SEWAGE PUMPS. Ranges MX, V, K Discharge Size DN 80 - DN 150
ELECTRIC SUBMERSIBLE SIBLE SEWAGE PUMPS Ranges MX, V, K Discharge Size DN 80 - DN 150 T h e s o u r c e f o r h i g h e f f i c i e n c y High Performance in Waste Water Pumping HOMA submersible waste
More informationELECTRIC SUBMERSIBLE SIBLE SEWAGE PUMPS. Rangess AK, KXAKX Discharge Size DN 200 DN
ELECTRIC SUBMERSIBLE SIBLE SEWAGE PUMPS Rangess AK, KXAKX Discharge Size DN 200 DN 500 T h e s o u r c e f o r h i g h e f f i c i e n c y High Performance in Waste Water Pumping HOMA submersible waste
More informationblue series bluepro series
5Hz water solutions blue series bluepro series DG blue DR blue DG bluepro DR bluepro GR bluepro AP bluepro D a t a b o o k l e t EN water solutions blue series bluepro series DG blue DR blue DG bluepro
More informationCompany name: Created by: Phone: Note! Product picture may differ from actual product
Date: 13/03/2017 Tender Text Note! Product picture may differ from actual product Product No.: 98993055 MTH4-5/5 A-W-A-AQQV Multistage, immersible, self-priming, centrifugal pump for vertical installation
More informationSubmersible Mixer. Amamix. 60 Hz. Type Series Booklet
Amamix 60 Hz Type Series Booklet egal information/copyright Type Series Booklet Amamix All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 120 203 PERFORMANCE CHART 200 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL
More informationHOMA Product Range. Electric Submersible Sewage Pumps Ranges K, KX. The source for world wide pump technology. Discharge Size DN 200 up to DN 400
The source for world wide pump technology HOMA Product Range Electric Submersible Sewage Pumps Ranges K, KX Submersible drainage pumps Contractor pumps Drainage pumps for emergency application Deepwell
More information- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
More informationAutomatic Waste Water Pump Station. Evamatic-Box N. Type Series Booklet
Automatic Waste Water Pump Station Evamatic-Box N Type Series Booklet Legal information/copyright Type Series Booklet Evamatic-Box N All rights reserved. The contents provided herein must neither be distributed,
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301 MECHANICAL SEAL 302 DIAGRAM
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART BEST ONE 202 PERFORMANCE CHART BEST ONE VOX 203
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 202 PERFORMANCE CHART VOX 203 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 DIAGRAM AND ELECTRIC CONNECTIONS 302 DIAGRAM
More informationJUNG PUMPEN COMPLI 100 MC SEWAGE LIFTING STATIONS
APPLICATION The sewage lifting stations compli 100, compli 500 and compli 1000 with MultiCut cutting system are uses especially for disposal in special objects, such as weekend cottages, houseboats, toilets
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 076 203 PERFORMANCE CURVES 106 204 - CONSTRUCTIONS 300 SECTIONAL
More informationCOLLECTION STATIONS AND WASTE WATER LIFTING DESIGN SPECIFICATIONS
Lenntech info@lenntech.com Tel. +31-152-61-9 www.lenntech.com Fax. +31-152-616-289 VACUSYSTEM 2 is an automatic pumping station, pre-assembled and ready to use. The ideal solution when waste water is collected
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00
More informationABS submersible sewage pump AFP
BS submersible sewage pump FP - Robust, reliable submersible pumps from. to kw for pumping wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas in accordance
More informationSeries description: Wilo-Stratos
Series description: Wilo-Stratos H/m 16 14 12 1 8 6 4 2 25(3,32,4,5)/1-1 25(3)/1-8 25(3)/1-6 25(3)/1-4 5/1-12 4/1-4 4/1-12 32/1-12 4(5)/1-8 3/1-12 4/1-16 5/1-9 65/1-9 65/1-12 Wilo-Stratos 65/1-16 5/1-16
More information- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
More information