Cable ladders and lighting fixture suspension rails

Transcription

1 Cable ladders and lighting fiture suspension rails

2 Seamless collaboration of lightness and carrying capacity The new SYSTEM Presto of higher quality than ever before is a cable ladder and suspension rail system in which lightness and class are combined with reliability and a high carrying capacity. Due to its epochal properties the aluminium SYSTEM Presto is perfect for a great diversity of uses. It is at home in demanding situations and circumstances. Easy to work and install The weight of aluminium is only one third of the weight of steel, which makes the SYSTEM Presto products so easy to handle and work with. When working with SYSTEM Presto, there are no problems with the coating coming off, and there is no need to protect cut surfaces. The non-sparking material ensures fire safety working in the installation. Meanwhile installing costs are significantly lowered. Endures use and corrosion The firm aluminium build of SYSTEM Presto is designed to endure time, strain, and for eample the corrosive influence of sea water. ook to the accompanying picture for a real-life eample: the installation in the picture has been in place for 40 years in sea conditions. With the right alloys aluminium products are highly corrosion resistant a separate, cost-increasing corrosion treatment is not needed. In customary circumstances SYSTEM Presto products do not require any maintenance. Eco-friendly and recyclable SYSTEM Presto is a fully aluminium shelving system. luminium is an easily recyclable material. Re-melting requires only five percent of the energy needed to produce the primary aluminium. Nordic luminium recycles the process scrap produced during compression and manufacturing through the foundry into recompressed material, which makes the manufacturing process ecological. 2 3

3 SYSTEM Presto cable ladders SYSTEM Presto cable ladder loading capacities (kg/m) on even spans. oad (kg/m) narrow N 1 wide N4 N N 1 narrow 0 wide SYSTEM Presto is a cable ladder solution designed especially for the demanding conditions of industry and construction. mong its most important qualities are corrosion-resistance and long spans. luminium makes SYSTEM Presto very lightweight yet highly dependable. SYSTEM Presto can answer the strictest requirements set for cable ladders. It is an eco-friendly and easily recyclable system that lasts long even in the most demanding circumstances. SYSTEM Presto is an investment that will quickly pay for itself due to its easy workability, ecellent dependability and long operating life. The versatile SYSTEM Presto cable ladder system includes aluminous cable ladders dimensioned for different loading capacity needs, shape and installation parts and support systems. When installing cables, the cable manufacturers directions and recoendations as well as the standard SFS must be followed. Cable ladders Span (m) The N 1 series ladders can reach a higher loading capacity, thanks to the new NJP coupler. The loading capacity for the N 140 N 1 ladders on a three meter span is 0 kg/m. adders rung spacing is 0. The safety factor is Coupler With the new NJP vertical coupler a greater loading capacity can be reached with the N1 series cable ladders. The N 140-N 1 cable ladders have a loading capacity of 0 kg/m on a 3 meter span. When installing the vertical coupler the epansion of the ladders by 1 / meter when the temperature rises to 40 o C must be noted. Vertical ladder/horizontal ladder The versatile SYSTEM Presto can also be installed as a vertical ladder either with NCV wall rails or fied straight to the wall. More space for cables The graceful and durable structure of SYSTEM Presto gives space as much as possible to the cables themselves.

4 C SYSTEM Presto cable ladders M Y CM MY CY CMY K adders and fittings series 0 These cable ladders are intended for light cable loads with maimum a 4 m span. The 0 series is manufactured with widths between 0 and 0. The ladders use stronger side profile than the narrower ladder. We recoend center or wall support systems for the series' ladders. orizontal ladders EN-code 0 *) 0 *) 040 *) 0 *) 0 *) , 0 Series 0 Delivery pack/m ength Weight kg/m Delivery pack/m ength Weight kg/m NV *) lso available at 00 length. 6 1 EN-code NV EN-code NB 0 NB 0 NB 040 NB 0 NB EN-code NT 0 NT 0 NT 040 NT 0 NT NB 0 0 NTB 0 NT 0 0 NTN 16 90o horizontal bend NTR 16 NU 00 NTS 00 NSR 1 NJP 00 NSC 12 1 Bends include the needed couplers. NC V 01, 06 Weight Delivery Weight Delivery D Weight Vertical hinged coupler and Universal hinged coupler NV /1 1 NU Wall bracket for vertical ladder NCV / NCV / Floor and wall bracket NCF / NFB Use F cable clamps NV 012 Use F /F cable clamps T-piece NSF NCF 00 NV 00 Delivery T-pieces include the needed couplers. Coupler and Corner coupler EN-code Parts Uniform load (kg/m) 0 NJP 00 NTP NJP 00 NTP / N V 00 NU Side rail deflection () Span (m) NC V 01, NCV 06* NCF 00 D * 11 D 7

5 SYSTEM Presto cable ladders cable ladder series meant for industry installations and ordinary cable loads with a span of m at most. Wide ladders, 400 0, use a stronger side profile than narrow ladders. Center and wall support systems as well as gate support systems work best with the series 1 ladders. Series 1 adders and fittings series 1 orizontal ladders EN-code Delivery ength Weight pack/m kg/m ) / ) 84 1 )/8 2 ) N 1 1 ) N 1 1 ) N ) N 1 2 ) N 1 2 ) o horizontal bend EN-code Delivery R Weight NTB 0 NTR 16 NTN 16 NB 1 1 NS 0 NT 1 1 NU 01 N 1 1 R 0 NB NB NB NB NB NV 01 NTS 01 N 1 1 Use F cable clamps NJP NPB 08 NSR 0 NP 17 NSF NS 14 NSB 14 T-piece EN-code Delivery Weight NT NT NT NT NT NCV 01, 06 NCF 01 Uniform load (kg/m) N 1 1 N NFB Parts NJP NTP 01 NV 01 NU 01 NCV 01, NCV 06* NCF 01 D 1 11 Coupler and Corner coupler EN-code Delivery D Weight NJP / NTP Vertical hinged coupler and Universal hinged coupler NV NU Wall bracket for vertical ladder NCV / NCV / Floor and wall bracket NCF / Span (m) Side rail deflection () * D 8 9

6 SYSTEM Presto cable ladders Series 4 is designed for especially heavy loads and spans of even m. Suitable systems for hanging series 4 cable ladders are gate and support rail systems as well as wall support either straight to a wall or to a support rail. Series 4 adders and fittings series 4 orizontal ladders EN-code Delivery ength Weight + pack/m kg/m 6 N N N N NB 4 4 NS 12 N 04 N o horizontal bend EN-code Delivery R Weight R 0 NB NB NB NB N 4 4 Use F cable clamps NJP 04 NSR 12 NB NT 4 4 NJP 04 NS 17 and 28 NSB 17 and 28 T-piece EN-code Delivery Weight NT NT NT NT NCV 26 N 4 4 NSP NFB Parts NJP 04 NTP 04 Coupler and Corner coupler EN-code Delivery D Weight NJP NTP NCF 04 Uniform load (kg/m) 0 1 N 4 4 NV 04 N Vertical hinged coupler and Universal hinged coupler NV N Wall bracket for vertical ladder NCV / NCV 26 7 NCF Floor and wall bracket NCF Span (m) Side rail deflection () NRR 41 NR 41 NRR 42 NR 42 D Floor and wall bracket NRR 41 (right) / NR 41 (left) / NRR 42 (right) / NR 42 (left) /

7 SYSTEM Presto cable ladders Series is designed for spans up to 12 m. Suitable systems for hanging series cable ladders are gate and support rail systems as well as wall support either straight to a wall or to a support rail. Note! Manufactured on order, check time of delivery. Series adders and fittings series orizontal ladders EN-code Delivery ength Weight + 32 pack/m kg/m 1 N N N N o horizontal bend EN-code Delivery R Weight NB NS 12 N 04 N R 0 NB NB NB NB N Use F cable clamps NJP 04 NSR 12 NB NT NJP 04 N NS 17 and 28 NSB 17 and 28 T-piece EN-code Delivery Weight NT NT NT NT NSP NCV 26 NFB Parts NTP 04 Coupler and Corner coupler EN-code Delivery D Weight NCF 04 Uniform load (kg/m) N - NJP 04 NV 04 N NJP NTP Vertical hinged coupler and orizontal hinged coupler NV N Wall bracket for vertical ladder NCV / Span (m) Side rail deflection () NCV NRR 41 NR 41 NRR 42 NR 42 7 NCF D Floor and wall bracket NCF / Reducers NRR 41 (right) / NR 41 (left) / NRR 42 (right) / NR 42 (left) /

8 SYSTEM Presto cable ladders, accessories Fiing rail profile EN-code Delivery B Weight kg/m Partition EN-code B Weight 1, NP NP NDI Support beam EN-code Delivery B Weight kg/m Ø13 ngle support NS 06 EN-code Delivery Weight NP NS /0 0.1 Cable clamp F F Cable cover Installation plate NIP B 3 B B 4 EN-code Delivery Range B Weight Ø F F F F F F F F F F F F F F F F F EN-code Delivery B Weight NCP NCP NCP NCP NCP NCP EN-code Delivery B Weight NIP / NCT 01 NPB 06 (M612) NPB (M) , NPB 08 (M82) 22 1 NTW Ø NPB 12 (M12) Sliding bracket NCT / Flat washer NTW / Insert nuts and bolts NPB / NPB /0 0.0 NPB / NPB /0 0.0 Use of insert nuts Insert nut NPB 06 NPB 08 NPB NPB 12 Cantilever brackets NSF 22 NSF 23 NSF 24 NSF 2 NSF 26 NSF 42 NSF 43 NSF 44 NSF 4 NSF 46 NSF 26 NSP 08 Wall rails NPB 06 NPB 08 NPB NPB 12 NSR 1 NSR 2 Suspension rail NPB 06 NPB 08 NPB NPB 12 NSB 14 Pendant rails NPB 06 NPB 08 NPB NPB 12 Nut and bolt NSR 0 NSR 12 Fiing rail profiles NPB 06 NPB 08 NPB NPB 12 NP 1 NP 14 1

9 SYSTEM Presto cable ladders, accessories Nut and bolt EN-code Delivery Weight (M40) NB /0 0.0 old down clamp EN-code Delivery Weight NC 06 NC NC / NC /0 0.0 ocking screw EN-code Delivery Weight NIS / Clamp for crossing ladders M6 EN-code Delivery Weight NCI /0 0.0 Vertical fleible bend EN-code Delivery For ength Weight series 2 NFB , 1-series NFB , 1-series NFB , 1-series NFB , 1-series NFB , 1-series NFB , -series NFB , -series NFB , -series NFB , -series

10 C M Y CM MY CY CMY K SYSTEM Presto cable ladders, fastening Center support systems Gate support systems oading capacity 12 kn oading capacity kn (support beam 2 kn) oading capacity 2 kn oading capacity 2 kn FSall kn NTB 0 FSall kn FSall kn FSall 12 kn NTB 0 NTN 16 NS 12 NTW 16 NTR 16 FSall kn NSR 12 NS 0 NTR 16 NTS NPB 08 NSC 12 1 NP 17 NSC 40 NSR 0 Recoended for ladder series N 1 Delivery 0.22 / Threaded rod NTR 16 (M16) /m NSC 12 NSC 13 NSC 14 NSC Rod coupling nut NTC 16 (M16) Flat washer NTW Support NSC NSC NSC Delivery / NTB /m 36 m Threaded rod NTR 16 (M16) /m Vertical support NTS 00 (0-series) NTS 01 (1-series) Nut NTN 16 (M16) 0.0 NS 12 / /0 Ceiling bracket EN-code /0 /0 0 Rod coupling nut NTC 16 (M16) /0 Flat washer NTW NTC NTW 16 Ø / Pendant rail NSR /m 36 m Support beam NP /m 36 Nut and bolt NPB 08 (M8) / NS 0 / NP NSC 40 NSR 0 Ø12 NTN Ø13 34 NSC NSC NSC NTS NTB 0 13 NTS 00 NTS NTW 16 NTR 16 (M1600) 1 63 Ø13 NSR Delivery 170 NSC 12 NSC 13 NSC 14 NSC 1 Weight NS 0 m /0 Delivery /0 0/0 NB (M40) Weight NTB 0 Pendant rail NSR m NTR 16 (M1600) Ceiling bracket EN-code Weight Ø18 34 NS 12 Nut and bolt NB Nut NTN 16 (M16) NSC 12 1 Ceiling bracket EN-code NTB 0 Weight Ceiling bracket EN-code Recoended for ladder series N 1 Recoended for ladder series 0 and N 1 Recoended for ladder series 0 and N 1 NPB 08 (M82) NTN Ø18 NTC

11 SYSTEM Presto cable ladders, fastening Gate support systems oading capacity 212 kn Wall support straight to wall. Wall support to wall rail. oading capacity 2 kn oading capacity 4 kn F Sall 12 kn NS 12 F Sall 12 kn NSR 1 NPB NSR 2 NPB (NSF 42 43) NPB 12 (NSF 44 46) NSF NSF NB Recoended for ladder series N 4 and N NSR 12 Recoended for ladder series 0 Cantilever bracket EN-code Weight Delivery Recoended for ladder series N 1 Cantilever bracket EN-code Weight Delivery EN-code Weight Delivery Ceiling bracket NS / NSF NSF NSF NSF NSF NSF NSF NSF NSF NSF Pendant rail NSR /m 36 m Wall rail NSR /m 36 m Wall rail NSR /m 36 m Nut and bolt NB /0 Nut and bolt NPB (M) /0 Nut and bolt NPB (M) /0 NPB 12 (M12) / NS NB (M40) NSR Ø12 NSF Ø11 NPB (M) 11 B NSF NSF NSF NSF NSF B NSR NPB 12 (M12) NPB (M) (NSF 42, 43) B Ø D NSF NSF NSF NSF NSF NSF ØD B NSR

12 SYSTEM Presto cable ladders, fastening Wall support straight to wall. Wall support to wall rail. oading capacity 4 kn oading capacity 6 kn oading capacity 3- kn NSW 26 NSW 26 NSR 2 NSR 28 NSR 28 NPB 12 NSP NSP NSP NSP NSP 08 Recoended for ladder series N 1, N 4 and N Cantilever bracket EN-code Weight Delivery NSP NSP NSP NSP NSP Wall support NSW Wall rail NSR /m 36 m NSP NSP NSP NSP NSP NSP Recoended for ladder series N 4 ja N Cantilever bracket EN-code Weight Delivery NSP NSP NSP NSP Wall support NSW Wall rail NSR /m 36 m NSP NSP NSP NSP NSP Recoended for ladder series 0 ja N 1 Cantilever bracket EN-code Weight Delivery NSP Wall rail NSR /m 36 m Nut and bolt NPB 12 (M12) /0 NSP S S F sall kn NSW 26 8 NSR 28 8 NSW 26 8 NSR NSR Ø11, 64 Ø11, NPB 12 (M12)

13 SYSTEM Presto cable ladders, fastening Suspension rail support systems oading capacity 14 kn, 00 Nm F Sall 14 kn NS 14 oading capacity 17 kn, Nm F Sall 17 kn NS 17 oading capacity 28 kn, Nm F Sall 28 kn NS 28 NSB 14 NSB 17 NSP NSF NSP NSB 28 NPB Recoended for ladder series N 1 Ceiling bracket EN-code Weight Delivery NS / Suspension rail NSB /m 36 m Recoended for ladder series N 1, N 4, and N Ceiling bracket EN-code Weight Delivery NS / Suspension rail NSB /m 36 m Recoended for ladder series N 4 ja N Ceiling bracket EN-code Weight Delivery NS Suspension rail NSB /m 36 m Cantilever bracket NSF NSF NSF NSF NSF NSF NSF Nut and bolt NPB /0 NPB (M) 22 1 NS M 170 B NSF NSF NSF NSF NSF NSF NSF NSF Ø11 NSF NSB B Cantilever bracket NSP NSP NSP NSP NSP NSP NSP NSP NSP NS 17 NSB Ø11, NSP NSP NSP NSP NSP NSP NSP NSP NSP NSP Cantilever bracket NSP NSP NSP NSP NSP NSP NSP NSP NSP NS NSB Ø11, 1 NSP NSP NSP NSP NSP NSP NSP NSP NSP NSP

14 SYSTEM Presto use and installation of suspension rails NSB 14 syetric loading syetric loading ma. 00 Nm Syetric loading ma. 14 kn NSB 28 syetric loading syetric loading ma. Nm Syetric loading ma. 28 kn T 1 T 2 T 3 T 1 T 2 T 3 Bending moment M=F 1 (/2+0.07) NS 14 NSB 14 F 1 F 2 Bending moment M=F 1 (/2+0.1) NS 28 NSB 28 NS 28 Deflection S F 1 1 F 1/2 F 1/2 F 1/2 F 1/2 1 F 2/2 F 2/2 2 Deflection S F 2 F 4 oading of mounting bolts (anchoring must be checked separately) T1=(M/0.22+) S M NSF oading of mounting bolts (anchoring must be checked separately) T 1 =(M/0.26+) 1 F 1 F 1/2 F 1/2 F 1 F 3 Syetric loading Deflection ma. (/) = Syetric loading M 1 F 1 =F 2 F=F 1 + F 2 T 2 =T 3 = Deflection S [] Bending moment M [Nm] F 1 =F 2 =F 3 =F 4 F=F 1 + F 2 + F 3 + F 4 T 2 =T 3 = Deflection ma. (/) Deflection S [] = NSB 17 syetric loading syetric loading ma. Nm T 1 Syetric loading ma. 17 kn T 2 T Bending moment M [Nm] Bending moment M=F 1 (/2+0.01) NS 17 NSB 17 F 1 F 1 F 2 Deflection S 1 F 1/2 F 1/2 F 1/2 F 1/2 1 F 2/2 F 2/2 2 oading of mounting bolts (anchoring must be checked separately) T 1 =(M/0.22+) Syetric loading F 1 =F 2 F=F 1 + F 2 T 2 =T 3 = Deflection ma. (/) 1 Deflection S [] 26 0 S M NSP Bending moment M [Nm] = 27

15 SYSTEM Presto installation eamples N... NB... NV... NJP... N... NU 00, 01 NJP... V 6 S ma. 00 S ma. 0 S ma. 0 NCI 06 N... NFB... Etending cable ladders with vertical couplers and universal hinged couplers, and fastening crossing ladders with clamps. Vertical coupler NJP... is also used in joining angle and T-pieces. Installing vertical fleible bends (NFB...), horizontal bends (NB...), and universal hinged couplers. Check ma. installation distance to support point. ttaching vertical ladders to wall and floor (NCV... and NCF...), and installing cable covers (NCP...) and cable clamps (F 2... and F 4...) to vertical ladders and fiing rail profiles (NP 1 and NP ). F 4... Installing T-pieces When installing corner couplers (NTP...) and horizontal hinged couplers (N...) the ma. distance to the support point is 00. When installing the T-piece compare the distance to the vertical coupler (NJP...). Installing reducers Distance from support S ma.= NR ma. 0 N 4- ja -series Fastening distance of wall attachments 2 m. Cable cover (NCP...) includes fastening screws. Distance from wall (): N 0... N 1... N 4 NCV 01, 06, 26 F 2... NCP 12 NP 1, S ma. 00 NJP... S ma. 00 NR ma. 0 NJP 04 NR NR N 4- ja -series NR NCV NCV NCV NCF 00, 01, 04 Distance from support S ma.=

16 SYSTEM Presto lighting fiture suspension rails The main places of use for lighting fiture rails are stores, offices, industrial halls and storage spaces as well as other high spaces. Their task is to ease the installation of lighting fitures as well as high- and low-tension equipment. Welldesigned and purposefully placed lighting fiture rail solutions secure a sufficient and even amount of light for the entire space. The aluminous SYSTEM Presto lighting fiture rails are light-weight. Despite this they have an ecellent torsion and bending stiffness. ong spans and a large selection of accessories that ease handling secure not only a fast and easy installation, but also low installation costs. Even lighting fiture load allowed for rails (Deflection 1/0) q kg/m XYRV 6M XYRV 8M XYRV 112M XYRV 6K XYRV 8K XYRV 112K The safety factor of SYSTEM Presto suspension rails is 1.7. Span (m) T-bracket T-bracket XYRV 244M and XYRV 244K for making a T-joint. Internal wall bracket Internal wall bracket XYRV 26, XYRV 28, and XYRV 2112 for attaching rails to walls. 31 Cover strip Cover strip FPR 4 1 (grey) and FPR 4 3 (white) for covering the bottom groove of the suspension rail. Suspension rails

17 SYSTEM Presto lighting fiture suspension rails Cross-sections of the rails EN-code EN-code XYRV 242 XYU 0 XYRV 2404 XYRV 6M*) Clear /40 m XYRV 6M 3 White m Weight: 0.6 kg/m *) lso available at 00 length XYRV 6K Clear /3 m XYRV 6K 3 White m Weight: 0.88 kg/m XYRV 2470 XYRV 2 XYRV 41 XYRV 26 XYRV 28 XYRV 2112 XYRV 2406 XYRV 2408 XYRV 2412 FPR 4 44 XYRV XYRV 244M XYRV 244K XYRV 2 XYRV 62 XYRV 82 XYRV XYRV 8M Clear /40 m XYRV 8M 3 White m Weight: 0.7 kg/m 66 XYRV 8K Clear /40 m XYRV 8K 3 White m Weight: 1.00 kg/m XYRV 6M XYRV 6K XYRV 8M XYRV 8K XYRV 112M XYRV 112K XYRV 2 XYRV 240 XYRV 401 XYRV The SYSTEM Presto suspension rails manufactured by Nordic luminium PC are aluminium profile. With the rails, both lighting fitures as well as high- and low-tension equipment can be installed quickly and easily. The suspension rail s perforation (2170 ) is dimensioned for eample for the EnstoNet installation system's 3 and poled socket. The lightness, long spans, and the accessories of the rails enable cheap installation costs. The aluminous SYSTEM Presto suspension rails are manufactured for two different types of loading capacities, M (height 44 ) and K (height ). Both rails are available in three different widths: 66,, and 1. The standard delivery length is 6 meters. The standard types of the suspension rails are delivered clear or painted R 90 (white). The rails are also available anodized and painted in R colors on order. 23 XYRV 112M Clear /40 m XYRV 112M 3 White m Weight: 0.96 kg/m XYRV 112K Clear /3 m XYRV 112K 3 White m Weight: 1.22 kg/m

18 SYSTEM Presto lighting fiture rails, installation parts Coupler 1 EN-code Delivery pack Insert nut with screw M612 EN-code Delivery pack XYRV /0 pcs XYRV /0 pcs 40 6 inged coupler 31 Suspension hook XYRV /0 pcs M6 XYRV /0 pcs Ceiling bracket 24 3, Ø11 XYRV /0 pcs Cover B XYRV m = B=6 XYRV m =9 B=70 XYRV m =1 B=1 Threaded rod (M00) luminium nut (M) Theaded rod 00 XYU /7 m luminium nut M XYRV pcs T-bracket XYRV 244M /0 pcs =47 XYRV 244K /0 pcs =63 Suspension brackets Internal wall 7 brackets 9 Ø13, 90 Suspension brackets XYRV pcs =9 XYRV pcs =72 XYRV pcs =112 Internal wall brackets XYRV / pcs =9 XYRV / pcs =72 XYRV / pcs =112 Wall bracket 3 Insert nut with screw M XYRV /0 pcs XYRV /0 pcs Installation plate 19 XYRV / pcs Support bar Pendant rail 3 1 M 21 9, XYRV /0 pcs XYRV m Cover strip FPR m/288 m FPR m/288 m

19 SYSTEM Presto suspension rails, loading capacities The lighting fiture has two points of fastening. l (m) a (m) Q, allowed load (kg) 6M 8M 112M 6K 8K 112K l (m) Even load of lighting fitures. l (m) a (m) Q, allowed load (kg) 6M 8M 112M 6K 8K 112K l (m) The following cable loads have been used in the calculations: XYRV 6M and 6K 1 kg/m XYRV 8M and 8K 1. kg/m XYRV 112M and 112K 2 kg/m I a Q a When installing, thermal epansion must be taken into consideration. The coefficient of thermal epansion is 23 6 / o C, which is equal to approimately 1 /m, when the temperature changes 40 o C. I a a Q a Q I When a=0, Q allowed=0 kg The lighting fiture has one point of fastening. Q, allowed load (kg) l (m) a (m) 6M 8M 112M 6K 8K 112K l (m)

20 C M Y CM MY CY CMY K

21 Nordic luminium Plc P.O. Bo 117, FI Kirkkonui, Finland Visiting address: Kaapelitie 68, FI Pikkala Tel , fa , Pinta, elsinki 7/08/00 pcs