Air Conditioning Disconnects Molded Case Switch

Transcription

1 Air Conditioning Disconnects Molded Case Switch Catalog 3150CT0401R08/ Class 3150 QO200TR QO200TRNM CONTENTS Description Page Application Dimensions

2 Air Conditioning Disconnects Molded Case Switch 2

3 Air Conditioning Disconnects Molded Case Switch Description Air conditioning disconnects from Schneider Electric are Underwriters Laboratories (UL ) Listed NEMA Type 3R rainproof. They are designed to meet all current National Electrical Code (NEC ) requirements for a disconnecting means on residential and commercial air conditioning installations, as well as other single-phase applications, such as swimming pools and pump houses. Configuration QO200TR NEMA Type 3R rainproof 240 Vac two-wire with ground (no neutral) Molded case switch versions for applications not requiring overcurrent protection Available in metallic and non-metallic enclosures General Construction Factory installed equipment grounding terminals with slot/square drive screws Cover padlock provision Molded Case Switch Construction Metallic enclosure has removable cover housing (front, top, and side walls) which provides open area for mounting and convenient installation Easy access to wiring terminals for conductor installation Optional mounting bracket, when used with metallic enclosure, simplifies installation for stucco and lapped siding applications QO200TRNM Enclosures Metallic enclosures are galvanneal steel enclosures with gray powder coat paint, rated NEMA Type 3R Non-metallic enclosures are all NEMA Type 3R Accessories Mounting Bracket PKHB Optional mounting bracket PKHB is specifically designed for mounting the QO200TR. This bracket is installed directly to the stud. After the siding goes up, mount the QO200TR air conditioning disconnect to the bracket with screws (not provided). 3

4 Air Conditioning Disconnects Molded Case Switch Application Air conditioning disconnects are designed for the following applications: Residential and light commercial applications 240 Vac maximum Suitable for use on systems with up to 10K RMS symmetrical amperes available fault current at 240 Vac 60 A maximum Horsepower rated Standards Air conditioning disconnects are manufactured in accordance with the following standards: UL Standard 1429, UL File Number E NEMA KS-1 QO200TR Air Conditioning Disconnect Molded Case Switch Rainproof UL Listed Service Ampere Rating Catalog Number c Metallic Enclosure Non-Metallic Enclosure 2-Wire (Molded Case Switch Included) 240 Vac Maximum Maximum hp c G/B 60 QO200TR QO200TRNM 10 Does not contain overcurrent protection. Suitable for use on systems with up to 10,000 RMS symmetrical amperes available fault current at 240 Vac max. when protected by a fuse or circuit breaker rated 60 A or less with a 10,000 A short circuit current rating. Housing Bracket Rainproof UL Listed Description Bracket used with QO200TR for stucco, aluminum and vinyl siding. Order quantity multiples of 10. Catalog Number PKHB 4

5 Figure 1: Air Conditioning Disconnects Molded Case Switch Table 1: Dimensions Catalog Number H W D IN mm IN mm IN mm Figure QO200TR QO200TRNM PKHB Figure 2: [8.75] 222 W [3.88] 99 Figure 3: H W D 5

6 Schneider Electric 1601 Mercer Road Lexington, KY USA Square D Square D is a trademark or registered trademark of Schneider Electric. Other trademarks used herein are the property of their respective owners. 3150CT0401R08/09 Replaces 3150CT0401 dated September 2004.