SHELL AND TUBE HEAT EXCHANCER PERFORMANCE SPECIFICATION SHEET. Model G P TEMA Type BEP Connected In 1 Parallel 1 Series
|
|
|
- Derrick Phillip Welch
- 5 years ago
- Views:
Transcription
1 SHELL AND TUBE HEAT EXCHANCER PERFORMANCE SPECIFICATION SHEET Service of Unit Aftercooler Item No 02 Case Minumum Model G P TEMA Type BEP Connected In 1 Parallel 1 Series Surf/Unit (Gross/Eff) 319 / 310 ft² Shells/Unit 1 Surf/Shell (Gross/Eff) 319 / 310 ft² PERFORMANCE OF ONE UNIT Fluid Allocation Shell Side Tube Side Fluid Name WATER AIR Fluid Quality, Total lb/hr 32,881 2,635 Vapor (In/Out) 2,635 2,635 Liquid Steam Water 32,881 32,881 Noncondensable 2,635 2,635 Temperature (In/Out) F Specific Density lbm/ft Viscosity, Liquid cp Molecular Weight, Vapor Molecular Weight, Noncondensable Specific Heat Btu/lb-F Btu/hr-ft-F Latent Heat Btu/lb Inlet Pressure psia Velocity ft/sec Pressure Drop, Allow/Calc psi Fouling Resistance (min) Heat Exchanged 71,483 Btu/hr MTD (Corrected) F Transfer Rate, Service 7.66 Clean 7.76 Btu/hr-ft²-F CONSTRUCTION OF ONE SHELL Sketch (Bundle/Nozzle Orientation) Shell Side Tube Side
2 Design/Test Pressure psig 150 / PER CODE 200 / PER CODE Design Temperature F 200 / / 51 No Passes per Shell 1 1 Corrosion Allowance inch Connections In inch 2-150# RFSO # RFSO Size & Out inch 2-150# RFSO # RFSO Rating Intermediate # NPT # NPT Tubes No. 195 OD in. Thk(Avg) in. Length: 120 in Pitch: in. Layout: 45 degrees Tube Type PLAIN Material: 304 Stainless stee Shell CARBON STEEL ID OD inch Shell Cover Channel or Bonnet 304 STAINLESS STEEL Channel Cover 304 STAINLESS STEEL Tubesheet-Stationary 304 STAINLESS STEEL Tubesheet-Floating 304 STAINLESS STEEL Floating Head Cover 304 STAINLESS STEEL Impringement Protection YES Baffles-Cross SA-516 Type SEGMENTAL %Cut (Diam) 30 Spacing(c/c) 4.72 Inlet inch Baffles-Long Seal Type Supports-Tube U-Bend Type Bypass Seal Arrangement Tube-Tubesheet Joint GROOVED, ROLLED, AND SEAL WELDED Expansion Joint NO Type Rho-V2-Inlet Nozzle Bundle Entrance Bundle Exit Gaskets-Shell Side NONASBESTOS Tube Side NONASBESTOS -Floating Head NONASBESTOS Code Requirements ASME SECTION VIII DIVISION 1 TEMA Class C Weight/Shell Operating Bundle lb Remarks Industrial Heat Exchangers 5701 S. Eastern Ave. Suite 300 Los Angeles, CA SHELL AND TUBE HEAT EXCHANCER PERFORMANCE SPECIFICATION SHEET Service of Unit Aftercooler Item No 02 Case Nominal
3 Model G P TEMA Type BEP Connected In 1 Parallel 1 Series Surf/Unit (Gross/Eff) 319 / 310 ft² Shells/Unit 1 Surf/Shell (Gross/Eff) 319 / 310 ft² PERFORMANCE OF ONE UNIT Fluid Allocation Shell Side Tube Side Fluid Name WATER AIR Fluid Quality, Total lb/hr 32,881 6,740 Vapor (In/Out) 6,740 2,635 Liquid Steam Water 32,881 32,881 Noncondensable 6,740 6,740 Temperature (In/Out) F Specific Density lbm/ft Viscosity, Liquid cp Molecular Weight, Vapor Molecular Weight, Noncondensable Specific Heat Btu/lb-F Btu/hr-ft-F Latent Heat Btu/lb Inlet Pressure psia Velocity ft/sec Pressure Drop, Allow/Calc psi Fouling Resistance (min) Heat Exchanged 177,980 Btu/hr MTD (Corrected) F Transfer Rate, Service Clean Btu/hr-ft²-F CONSTRUCTION OF ONE SHELL Sketch (Bundle/Nozzle Orientation) Shell Side Tube Side Design/Test Pressure psig 150 / PER CODE 200 / PER CODE Design Temperature F 200 / / 51
4 No Passes per Shell 1 1 Corrosion Allowance inch Connections In inch 2-150# RFSO # RFSO Size & Out inch 2-150# RFSO # RFSO Rating Intermediate # NPT # NPT Tubes No. 195 OD in. Thk(Avg) in. Length: 120 in Pitch: in. Layout: 45 degrees Tube Type PLAIN Material: 304 Stainless stee Shell CARBON STEEL ID OD inch Shell Cover Channel or Bonnet 304 STAINLESS STEEL Channel Cover 304 STAINLESS STEEL Tubesheet-Stationary 304 STAINLESS STEEL Tubesheet-Floating 304 STAINLESS STEEL Floating Head Cover 304 STAINLESS STEEL Impringement Protection YES Baffles-Cross SA-516 Type SEGMENTAL %Cut (Diam) 30 Spacing(c/c) 4.72 Inlet inch Baffles-Long Seal Type Supports-Tube U-Bend Type Bypass Seal Arrangement Tube-Tubesheet Joint GROOVED, ROLLED, AND SEAL WELDED Expansion Joint NO Type Rho-V2-Inlet Nozzle Bundle Entrance Bundle Exit Gaskets-Shell Side NONASBESTOS Tube Side NONASBESTOS -Floating Head NONASBESTOS Code Requirements ASME SECTION VIII DIVISION 1 TEMA Class C Weight/Shell Operating Bundle lb Remarks Industrial Heat Exchangers 5701 S. Eastern Ave. Suite 300 Los Angeles, CA SHELL AND TUBE HEAT EXCHANCER PERFORMANCE SPECIFICATION SHEET Service of Unit Aftercooler Item No 02 Case Maximum Model G P TEMA Type BEP Connected In 1 Parallel 1 Series Surf/Unit (Gross/Eff) 319 / 310 ft² Shells/Unit 1 Surf/Shell (Gross/Eff) 319 / 310 ft²
5 PERFORMANCE OF ONE UNIT Fluid Allocation Shell Side Tube Side Fluid Name WATER AIR Fluid Quality, Total lb/hr 32,881 21,563 Vapor (In/Out) 21,563 2,635 Liquid Steam Water 32,881 32,881 Noncondensable 21,563 21,563 Temperature (In/Out) F Specific Density lbm/ft Viscosity, Liquid cp Molecular Weight, Vapor Molecular Weight, Noncondensable Specific Heat Btu/lb-F Btu/hr-ft-F Latent Heat Btu/lb Inlet Pressure psia Velocity ft/sec Pressure Drop, Allow/Calc psi Fouling Resistance (min) Heat Exchanged 520,210 Btu/hr MTD (Corrected) F Transfer Rate, Service Clean Btu/hr-ft²-F CONSTRUCTION OF ONE SHELL Sketch (Bundle/Nozzle Orientation) Shell Side Tube Side Design/Test Pressure psig 150 / PER CODE 200 / PER CODE Design Temperature F 200 / / 51 No Passes per Shell 1 1 Corrosion Allowance inch
6 Connections In inch 2-150# RFSO # RFSO Size & Out inch 2-150# RFSO # RFSO Rating Intermediate # NPT # NPT Tubes No. 195 OD in. Thk(Avg) in. Length: 120 in Pitch: in. Layout: 45 degrees Tube Type PLAIN Material: 304 Stainless stee Shell CARBON STEEL ID OD inch Shell Cover Channel or Bonnet 304 STAINLESS STEEL Channel Cover 304 STAINLESS STEEL Tubesheet-Stationary 304 STAINLESS STEEL Tubesheet-Floating 304 STAINLESS STEEL Floating Head Cover 304 STAINLESS STEEL Impringement Protection YES Baffles-Cross SA-516 Type SEGMENTAL %Cut (Diam) 30 Spacing(c/c) 4.72 Inlet inch Baffles-Long Seal Type Supports-Tube U-Bend Type Bypass Seal Arrangement Tube-Tubesheet Joint GROOVED, ROLLED, AND SEAL WELDED Expansion Joint NO Type Rho-V2-Inlet Nozzle Bundle Entrance Bundle Exit Gaskets-Shell Side NONASBESTOS Tube Side NONASBESTOS -Floating Head NONASBESTOS Code Requirements ASME SECTION VIII DIVISION 1 TEMA Class C Weight/Shell Operating Bundle lb Remarks
Heat Exchangers. There are many types of heat exchangers applied in the process industry. These types include:
Heat Exchangers Heat exchangers are used to transfer heat between two sources. The exchange can take place between a process stream and a utility stream (cold water, pressurized steam, etc), a process
PV Newsletter Monthly Publication from CoDesign Engineering Skills Academy
April 15, 2013 PV Newsletter Monthly Publication from CoDesign Engineering Skills Academy www.codesignengg.com This article has some reproductions from the PV Newsletter - Volume 1, Issue 10 contributed
U-Tube Heat Exchanger
دا ه ﻨﺪ ﯽ ﻣ ﮑﺎ ﯿﮏ ﻞ دوم : ﺒﺪ ﮫﺎی ارﯽ ﻮ ﻪ ﻮ ای Shell &Tube Heat Exchangers U-Tube Heat Exchanger Straight-Tube ( 1-Pass ) Straight-Tube ( 2-Pass ) TEMA Heat Exchanger Tubular Exchanger Manufacture s Association(TEMA)
Lecture 1: Heat Exchangers Classifications
Lecture 1: Heat Exchangers Classifications 1. PROCESS DESIGN OF SHELL AND TUBE EXCHANGER FOR SINGLE PHASE HEAT TRANSFER 1.1. Classification of heat exchangers Transfer of heat from one fluid to another
the new standard in Heat Transfer Equipment Century Series Heat Exchangers
the new standard in Heat Transfer Equipment Century Series Heat Exchangers Pre-engineered & custom-engineered heat exchangers, designed to TEMA specs. Century Series HEAT Exchangers Design flexibility
SHELL & TUBE HEAT EXCHANGER
SHELL & TUBE HEAT EXCHANGER ASERA Heat ransfer T A N a m e M o v e s around the world ASERA Heat ransfer T A N a m e M o v e s around the world KASERA Heat Transfer Pvt. Ltd. was established in 1955.
BASCO PIPELINE AFTERCOOLERS. ...world leaders in heat transfer technology
BASCO PIPELINE AFTERCOOLERS...world leaders in heat transfer technology Basco Pipeline Aftercoolers (PLAC) The Basco PLAC and PLAC II aftercooler and companion separator provide an ideal combination to
Thrush Co Inc. Heat Exchanger Selector. Tutorial
Thrush Co Inc Heat Exchanger Selector Tutorial May 22nd, 2015 v1.0 Purpose The purpose of this tutorial is to help guide you through a selection of a Thrush Co. Inc. heat exchanger, view and understand
Lecture 2: Thermal Design Considerations
Lecture 2: Thermal Design Considerations The flow rates of both hot and cold streams, their terminal temperatures and fluid properties are the primary inputs of thermal design of heat exchangers. 1.2.
Heat Exchangers (Chapter 5)
Heat Exchangers (Chapter 5) 2 Learning Outcomes (Chapter 5) Classification of heat exchangers Heat Exchanger Design Methods Overall heat transfer coefficient LMTD method ε-ntu method Heat Exchangers Pressure
MAHLE Automatic Filter Series R8-30W
MAHLE Automatic Filter Series R8-30W With internal pressure segment cleaning, rated pressure to 150 psi Connection Sizes: ANSI 8" to ANSI 20", welded design 1. Features Powerful, fully automatic filtration
Shell & Tube Heat Exchangers
Shell & Tube Heat Exchangers CUSTOM ENGINEERED SERIES: CENTURY PRODUC Shell & Tube Heat Exchangers As the recognized leader in heat exchanger products, systems and technology, Standard Xchange has been
Delivering unsurpassed quality, design and value.
Delivering unsurpassed quality, design and value. Exergy has been a leading global supplier of heat transfer solutions for over twenty-five years. We utilize state-of-the-art design and manufacturing techniques
BASCO TYPE OP (AEW) HEAT EXCHANGERS
BASCO TYPE OP (AEW) HEAT EXCHANGERS...world leaders in heat transfer technology Standard Heat Exchanger Designs Deliver Cost Effective Performance First introduced in 1962, the Basco OP design has proven
Thermal Unit Operation (ChEg3113)
Thermal Unit Operation (ChEg3113) Lecture 9- Shell and Tube Heat Exchanger Design Instructor: Mr. Tedla Yeshitila (M.Sc.) Today Review Shell and tube heat exchanger Steps in Shell and tube heat exchanger
Capacity Charts. Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service
Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service About Reyco Valve Division The Reyco line of direct spring acting pressure relief valves utilizes sound engineering principles
Shell & Tube Heat Exchangers
Shell & Tube Heat Exchangers Pre-Engineered Series: BCF/SSCF/SX2000/B300 PrOdUC Shell & Tube Heat Exchangers As the recognized leader in heat exchanger products, systems and technology, Standard Xchange
STANDARD DATA SHEET FOR. Integrally Gear Centrifugal Compressor
TOYO ENGINEERING INDIA LIMITED. STANDARD DATA SHEET FOR Integrally Gear Centrifugal Compressor ISSUE R0 REQ. NO. Standard Data Sheet No. API - 672 Project Document No. -A-95-46-001 4807 JOB DATE 8/5/2009
Heat Exchanger Design
CH2407 Process Equipment Design II Heat Exchanger Design Dr. M. Subramanian Associate Professor Department of Chemical Engineering Sri Sivasubramaniya Nadar College of Engineering Kalavakkam 603 110, Kanchipuram
C/SSC. FLUID COOLING Shell & Tube C & SSC Series. Features. Materials SSC Series. Ratings Standard. Materials C Series.
FLUID COOLING Shell & Tube Series COPPER/STEEL OR STAINLESS STEEL CONSTRUCTION Features API/BASCO Interchange ASME Code Option Preferred for New Oil-Water Applications C-Series / SSC Series Rugged Steel
Non-Return Valves - Type 801 ASME SEMPELL
SEMPELL Sempell controlled and uncontrolled Non-Return or Swing Check Valves prevent unallowable pressure built up in the turbine coming due to back-flowing steam. Features and Benefits low maintenance
Nomenclature. Nomenclature Distributing coil types
STEAM COILS Contents and Nomenclature Distributing coil types Nomenclature... 1 Distributing Coil Types JA and GA... 1 DA and LA... 1 RA and TA... 2 Non-Distributing Coil Types SA and HA, SB and HB...
LINE SILENCER. Copyright 2009 by PULSCO Incorporated. All rights reserved. Reproduction without permission is prohibited.
LINE SILENCER Copyright 2009 by PULSCO Incorporated. All rights reserved. Reproduction without permission is prohibited. PRODUCT GUIDE PULSCO LINE SILENCER TABLE OF CONTENTS DESCRIPTION PAGE PULSCO LINE
Direct Contact Desuperheaters
Control Description Spirax Sarco direct contact desuperheaters reduce the temperature of superheated steam to produce steam temperatures approaching saturation temperature to cool the superheated steam,
Excerpts from the ASME PVP 2017 technical paper
Excerpts from the ASME PVP 2016 technical paper An Improved Design of Threaded Closures for Screw-Plug Heat Exchangers by Haresh Sippy, MD, TEMA India Ltd Excerpts from the ASME PVP 2017 technical paper
394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
Filter Application Specification Sheet
Complete and Submit for Application Assistance or With Formal Inquiry Filter Application Specification Sheet Distributor Name Customer Information Customer Phone Number Title Fax Number Process Data Fluid
The Practical Uses of Computational Fluid Dynamics Not Just a Pretty Picture
The Practical Uses of Computational Fluid Dynamics Not Just a Pretty Picture Presenter: William Osley Company: CALGAVIN Ltd Email: william.osley@calgavin.com Page 1 Contents: Introduction Case Study 1:
Gasketed plate heat exchangers range
Technical specifications Gasketed plate heat exchanger (GPHE) data and dimensions T2 M3 TL3 T5 M6 Plate types T2B M3/M3D TL3B/TL3P/TL3BD T5M/T5B M6, M6M, M6MD Frame type FG FG FG FG FG FD Height, H [mm]
OR STAINLESS STEEL CONSTRUCTION
FLUID COOLING Shell & Tube Series 92 COPPER/STEEL OR STAINLESS STEEL CONSTRUCTION Features API/BASCO Interchange ASME Code Option Preferred for New Oil-Water Applications C-Series / SSC Series Rugged Steel
CROSBY STYLE JB PRESSURE RELIEF VALVE
A large orifice pressure relief valve engineered to provide high quality, dependable overpressure protection for air, gas, vapor and steam applications FEATURES Ten size product range is the broadest available.
AUXILIARY COMPONENTS
CHAPTER 9 AUXILIARY COMPONENTS Fluid Power Circuits and Controls, John S.Cundiff, 2001 INTRODUCTION Discussion of the hardware needed to connect the various components (pumps, actuators, valves, accumulators,
TO STUDY OF PARAMETRIC ANALYSIS OF SHELL AND TUBE HEAT EXCHENGER
TO STUDY OF PARAMETRIC ANALYSIS OF SHELL AND TUBE HEAT EXCHENGER Durgesh Rai 1, Sunil Bharati 2, Sohail Bux 3 1 P.G Research Scholar, Department of Thermal Engineering, Agnos college of Technology, RKDF
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
SAFE - ANSI / -TC / -TCP / -TCS
SAFE - ANSI / -TC / -TCP / -TCS Safety valves Angle pattern safety valve 1 to 6 ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
F-2700 SERIES INSERTION VORTEX FLOW METER
F-2700 SERIES INSERTION VORTEX FLOW METER APPLICATIONS Saturated steam Hot water to 500 F (260 C) standard 750 F (400 C) optional Applications with optional pressure sensor Superheated steam to 500 F (260
FLUID COOLING Shell & Tube EK Series
FLUID COOLING Shell & Tube Series COPPER & STEEL CONSTRUCTION Features Compact Size High Efficiency Finned Bundle Design Low Cost Optional Patented Built-in Surge-Cushion Relief Bypass 3/16 Tube Size Heat
Vent/Fan Silencers UNIVERSAL. Vent/Fan Silencers ENERGY ENVIRONMENTAL
Vent/Fan Silencers Vent/Fan Silencers UNIVERSAL ENERGY ENVIRONMENTAL 4.1 4.1 Rotary Positive Blower Silencers HV Series Combination Easy To Specify and Order Vent and blowdown silencers are rarely a simple
304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
Design and Performance Study of Shell and Tube Heat Exchanger with Single Segmental Baffle Having Perpendicular & Parallel-Cut Orientation.
Design and Performance Study of Shell and Tube Heat Exchanger with Single Segmental Baffle Having Perpendicular & Parallel-Cut Orientation. Swarup S Deshpande Mechanical Engineering Intern Excel Plants
YStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure
Learn How to Optimize Heat Exchanger Designs using Aspen Shell & Tube Exchanger. A self guided demo to get started with Aspen Shell & Tube Exchanger
Learn How to Optimize Heat Exchanger Designs using Aspen Shell & Tube Exchanger A self guided demo to get started with Aspen Shell & Tube Exchanger Why use Aspen Shell & Tube Exchanger? Aspen Shell & Tube
F-1500 SERIES INSERTION TURBINE FLOW METER FEATURES Belcher Road South, Largo, FL USA Tel +1 (727) Fax +1 (727)
F-1500 SERIES INSERTION TURBINE FLOW METER Insertion turbine flow meters are ideal for use in larger steam lines where downsizing the line size to improve flow measurement is not desirable. In these applications,
Generator and Motor Coolers
Generator and Motor Coolers Enerfin Generator and Motor Coolers (RAM) are manufactured and designed to ASME codes and TEMA standards as required. Our coolers with removable covers can be manufactured using
High CATALOG. Efficiency. Pilot Operated Safety Valves Series 810 Pop Action Series 820 Modulate Action. The-Safety-Valve.com
High Efficiency Pilot Operated Safety Valves Series 10 Pop Action Series 20 Modulate Action CATALOG The-Safety-Valve.com Valve finder How to find the right product group High operating to set pressure
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ENGINEERING STANDARD FOR PROCESS DESIGN OF DOUBLE PIPE HEAT EXCHANGERS ORIGINAL EDITION JULY 1995
ENGINEERING STANDARD FOR PROCESS DESIGN OF DOUBLE PIPE HEAT EXCHANGERS ORIGINAL EDITION JULY 1995 This standard specification is reviewed and updated by the relevant technical committee on June 2000. The
VENT SILENCER PRODUCT GUIDE
VENT SILENCER Copyright 200 by PULSCO Incorporated. All rights reserved. Reproduction without permission is prohibited. PRODUCT GUIDE PULSCO VENT SILENCER TABLE OF CONTENTS DESCRIPTION PAGE PULSCO VENT
F-2700 SERIES INSERTION VORTEX FLOW METER
F-2700 SERIES INSERTION VORTEX FLOW METER CALIBRATION Every ONICON flow meter is wet calibrated in a flow laboratory against standards that are directly traceable to N.I.S.T. A certificate of calibration
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
F-1500 SERIES INSERTION TURBINE FLOW METER
F-1500 SERIES INSERTION TURBINE FLOW METER APPLICATIONS Saturated steam Hot water to 450 F (232 C) standard 850 F (454 C) optional Applications with optional pressure sensor Superheated steam to 450 F
BASCO /WHITLOCK INSTALLATION & MAINTENANCE GUIDE. ...world leaders in heat transfer technology
BASCO /WHITLOCK INSTALLATION & MAINTENANCE GUIDE...world leaders in heat transfer technology INSTALLATION SITE SELECTION is the first step to insure proper installation of Basco/Whitlock heat transfer
Fluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
SINCE Heat Exchangers. Plate and Frame FFW AHRI. Shell and Tube W & S. Brazed FFB cat-2016-he
Heat Exchangers Plate and Frame FFW AHRI Shell and Tube W & S Brazed FFB www.flofab.com 001-cat-2016-he TABLE OF CONTENTS PLATE AND FRAME - Product SpecificationS...2 PLATE AND FRAME - TYPICAL Specifications...3
SRH2. Steam Rig Heater. Industrial Grade Heat-Exchanger Unit Heaters. CRN: 0H C 150 psig (1034 KPa)
SRH2 EAC Ex models available. Contact factory! Steam Rig Heater CRN: 0H14931.2C 150 psig (1034 KPa) Industrial Grade Heat-Exchanger Unit Heaters www.hazlocheaters.com is a manufacturer of industrial-grade
Sempell High Pressure Stop Valves Model VA500 (ASME)
7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features
Complete HVAC Capability
Air Handling Units Brochure 1110 January 2006 Complete HVAC Capability MEA Horizontal Draw-Thru to Size 65 Vertical Draw-Thru to Size 50 1000 to 60,000 CFM Forward Curved or Airfoil Wheels Inlet Vane Option
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
SEMPELL TURBINE BYPASS VALVE MODEL 115 CHP
A range of high pressure turbine bypass valves that provide greater reliability under extreme conditions. FEATURES Pressure reduction by multi-stage controlled expansion Atomizing steam desuperheater,
Yarway Hy-Drop Throttling valve
YARWAY Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation Features Dual range throttling - primary range plus a super capacity blast range. Rapid energy
[NCB EXPANSION JOINTS]
![[NCB EXPANSION JOINTS]](/thumbs/84/90832222.jpg "[NCB EXPANSION JOINTS]")
[NCB EXPANSION JOINTS] Normal Corr expansion joints employ a standardized bellows design ideally suited for general industrial applications. Offered with flanges or butt weld ends from 3 to 48 nominal
Pilan. Hydraulic Oil Coolers and Heat Exchangers
Pilan Hydraulic Coolers and Heat Exchangers www.comeval.es Toraflex - is a trademark of Comeval Valve Systems Data subject to change without prior notice Pilan Hydraulic Coolers and Heat Exchangers Index
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
SARAVEL SEMI-HERMETIC LIQUID CHILLERS CAT-SLCH-2010(0)
SARAVEL SEMI-HERMETIC LIQUID CHILLERS CAT-SLCH-2010(0) 2 TABLE OF CONTENTS Introduction...3 Physical & Electrical Data 4-8 Selection Examples 9-10 Ratings-Single Compressor Models...11-21 Single Compressor
HIGH PERFORMANCE SEALING
12-2010 HIGH PERFORMANCE SEALING GASKETS FOR ENHANCED JOINT INTEGRITY Although relatively new to the U.S. market, the FLEXPRO gasket has been providing an extremely tight, reliable seal in a wide range
Shell and tube heat exchangers Model series
Shell and tube heat exchangers Model series Quality shell and tube exchangers from specialists ViFlow has the exclusive right to sell FUNKE s products in Finland. The company was founded in 1974 and focus
Pressure Relief Valve Maintenance Manual
Technical Manual 1098T Pressure Relief Valve Maintenance Manual Farris Engineering Division of Curtiss-Wright Flow Control Corporation TABLE OF CONTENTS - Manual Revision 0 Introduction & Safety Tips...
SAFE - ANSI. Angle pattern safety valve 1 to 6 (DN 25 to 150) Safety valves ARI-SAFE-ANSI
SAFE - ANSI Safety valves Angle pattern safety valve 1 to 6 (DN 25 to 150) ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
Rosemount 285 Annubar Primary Element Series
0013-0100-02, Rev CA Rosemount 25 Annubar Primary Element Series Designed for general purpose applications Increased plant uptime with the maintenance-free design Energy savings gained through minimal
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation.
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation. General Description Valves used for throttling services have always been subject to rapid deterioration
AP1000 European 5. Reactor Coolant System and Connected Systems Design Control Document
CHAPTER 5 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS 5.1 Summary Description This section describes the reactor coolant system (RCS) and includes a schematic flow diagram of the reactor coolant system
1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
C U S T O M E R D R I V E N R E S U L T S O R I E N T E D
C O M P O N E N T S F O R T H E R E F R I G E R A T I O N A N D A I R C O N D I T I O N I N G I N D U S T R Y C U S T O M E R D R I V E N R E S U L T S O R I E N T E D C A T A L O G 1 0 9 E D I T I O N
Kraus and Bar-Cohen Sample Problem 15.7 Comparison
Kraus and Bar-Cohen Sample Problem 15.7 Comparison Compare the results of sample problem 15.7 of Allan Kraus and Avram Bar-Cohen book Thermal Analysis and Control of Electronic Equipment to COLDPLATE results.
RAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
Performance Evaluation Of A Helical Baffle Heat Exchanger
Performance Evaluation Of A Helical Baffle Heat Exchanger Mayank Vishwakarma 1, Professor. K. K. Jain 2 1 M.E IV Semester (Heat Power Engineering) Shri Ram Institute of Technology, Jabalpur 482002 (M.P)
YARWAY THROTTLING VALVES HY-DROP MODEL 5817/ 5827
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation. 5817- ASME class 1700 5827- ASME class 2700 FEATURES GENERAL APPLICATION The Hy-Drop throttling
High pressure float valve, type HFI REFRIGERATION AND AIR CONDITIONING. Technical leaflet
High pressure float valve, type HFI REFRIGERAION AND AIR CONDIIONING echnical leaflet Contents Page Introduction........................................................................................3
Sempell controlled non-return or Bled Steam Check Valves prevent unallowable pressure built up in the turbine coming due to back-flowing steam.
Sempell controlled non-return or Bled Steam Check Valves prevent unallowable pressure built up in the turbine coming due to back-flowing steam. Features and Benefits Special advantages of the valve series
VersaFlow Vortex 100 Vortex Flow Meter Specifications
VersaFlow Vortex 100 Vortex Flow Meter Specifications 34-VF-03-05 May 2011 The All-In-One Solution The VERSAFLOW is the only vortex flowmeter with integrated and temperature compensation in 2- wire technology.
DRY-EXPANSION EVAPORATORS
DRY-EXPNSION EVPORTORS DP-273-1 EN DH SERIES RF SERIES Table of contents Performance and features 3 Design data 4 PED (E) approval 4 Denomination 4 Materials 5 apacity and maximum allowable water flow
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation.
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation. Features General application The throttling valve is designed for continuous blowdown, but also
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
Si 910. Engineering GREAT Solutions. Safety Valves acc. to ASME Sec. I, Sec. III and Sec. VIII
Engineering GREAT Solutions Safety Valves acc. to ASME Sec. I, Sec. III and Sec. VIII Features IMI Bopp & Reuther steam safety valve acc. to ASME Sec. I > High capacity > Fixed overpressure and blowdown
Model CBLE Boilers HP
Boilers 125-800HP CONTENTS FEATURES AND BENEFITS.....................................................4 True Boiler/Burner/Low NOx Package................................................4 PRODUCT OFFERING.........................................................4
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
VORTEX IN-LINE FLOW METERS
VORTEX IN-LINE FLOW METERS Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, degrees out of phase
Boiler Feed Booster Pump YNK. Type Series Booklet
YNK Type Series Booklet Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any
IJESR/Oct 2012/ Volume-2/Issue-10/Article No-12/ ISSN International Journal of Engineering & Science Research
International Journal of Engineering & Science Research DESIGN AND CFD ANALYSIS OF U TUBE HEAT EXCHANGER P.B. Borade* 1, K.V.Mali 2 1 P.G. Student, Mechanical Department, Sinhgad College of Engineering,
Spring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
CAT PAU 99(2) SUPERSEDES CAT.NO SARAVEL PACKAGED AIR CONDITIONING UNITS
CAT PAU 99(2) SUPERSEDES CAT.NO.200-95 SARAVEL PACKAGED AIR CONDITIONING UNITS TABLE OF CONTENTS Introduction...3 Physical Data..... 4 Selection Procedure....5-7 Water Cooled Packaged Unit Ratings....
Vortex In Line Flow Meter
Vortex In Line Flow Meter Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, 0 degrees out of phase
Direct Contact Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
Shell-and-tube dry expansion evaporators Alfa Laval DH
Alfa Laval in brief Alfa Laval is a leading global provider of specialized products and engineered solutions. Our equipment, systems and services are dedicated to helping customers to optimize the performance
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
Vortex In Line Flow Meter
Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, 0 degrees out of phase to each other, resulting