Drying Tumblers. 25 Pound (220 Liter) Capacity 30 Pound (270 Liter) Capacity 35 Pound (350 Liter) Capacity. Refer to Page 5 for Model Numbers 25 C

Transcription

1 1 2 3 SELECT TEMP HIGH TEMP MED TEMP INSERT COIN PUSH START START LOW TEMP NO HEAT 25 C Drying Tumblers 25 Pound (220 Liter) Capacity 30 Pound (270 Liter) Capacity 35 Pound (350 Liter) Capacity Refer to Page 5 for Model Numbers Parts T463P_ Part No R19 January 2018

2

3 Table of Contents Title Page Parts Ordering Information... 3 Serial Plate Location... 3 Model Identification... 5 Electronic Coin Drop Components... 6 Coin Drop Assemblies... 8 Card Reader Components Electromechanical Coin Drop Components Rotary Coin Drop Assemblies Manual Dual Timer Controls OPL Microprocessor Controls Card Reader for NetMaster Models Coin Drop Components for NetMaster Models Network Board for NetMaster Models Communication Board for NetMaster Models Cabinet Front Components (Drawing 1 of 2) Cabinet Front Components (Drawing 2 of 2) Lower Cabinet Front Components Cabinet Components Door and Hinge Components Cylinder Components - Models Through Serial No. 9712xxxx Cylinder Components - Models Starting Serial No. 9712xxxx Drive Motor Components Drive Motors Drive Motor and Pulley Assemblies for 0350 Models Blower Components Fan Motors for 0220 and 0270 Models Fan Motors for 0350 Models Airflow Switch and Gas Burner Components Gas Burner Housing Gas Valve and Piping Burner Orifice for Liquid Petroleum Gas Burner Orifice for Natural Gas Electric Heater Components Steam Heater Steam Solenoid Valve Control Tray - Non-CE and Non-Australian Gas Models Control Tray - Non-CE and Non-Australian Steam Models Control Tray - Non-CE and Non-Australian Electric Models Accessory Box - Non-CE and Non-Australian Electric Models Control Tray - CE and Australian Gas Models Control Tray - CE Steam Models Copyright 2018, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

4 Control Tray - CE Electric Models Accessory Box - CE Electric Models Parts Index Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

5 If literature or replacement parts are required, contact the source from whom the machine was purchased or contact Alliance Laundry Systems at (920) for the name and address of the nearest authorized parts distributor. Parts Ordering Information For technical assistance, call the number listed below: (920) Ripon, Wisconsin When calling or writing about your product, be sure to mention model and serial numbers. Model and serial numbers are located on serial plate(s) as shown. Serial Plate Location Serial Plate TMB2462P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

6 Notes Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

7 Model Identification Information in this manual is applicable to these tumbler models: AT0350SRG AT0350SSH AT0350SSL DA0220SRG DA0270SRG DA0350SRG DC0220SEL DC0220SFG DC0220SRG DC0220SSH DC0220SSL DC0270SEL DC0270SFG DC0270SRG DC0270SSH DC0270SSL DC0350SEL DC0350SFG DC0350SRG DC0350SSH DC0350SSL DT0220SEL DT0220SFG DT0220SRG DT0220SSH DT0220SSL DT0270SEL DT0270SFG DT0270SRG DT0270SSH DT0270SSL DT0350SEL DT0350SFG DT0350SRG DT0350SSH DT0350SSL GC0220SEL GC0220SSL GC0270SEL GC0270SFG GC0270SRG GC0270SSH GC0270SSL GT0220SSL GT0270SEL GT0270SFG GT0270SRG GT0270SSH GT0270SSL JA0220SRG JA0270SRG JA0350SRG JC0220SEL JC0220SFG JC0220SRG JC0220SSH JC0220SSL JC0270SEL JC0270SFG JC0270SRG JC0270SSH JC0270SSL JC0350SEL JC0350SFG JC0350SRG JC0350SSH JC0350SSL JT0220SEL JT0220SFG JT0220SRG JT0220SSH JT0220SSL JT0270SEL JT0270SFG JT0270SRG JT0270SSH JT0270SSL JT0350SEL JT0350SFG JT0350SRG JT0350SSH JT0350SSL LC0350SRG LT0220SRG LT0270SRG LT0350SRG PA0220SRG PA0270SRG PA0350SRG PC0220SEL PC0220SFG PC0220SRG PC0220SSH PC0220SSL PC0270SEL PC0270SFG PC0270SRG PC0270SSH PC0270SSL PC0350SEL PC0350SFG PC0350SRG PC0350SSH PC0350SSL PT0220SEL PT0220SFG PT0220SRG PT0220SSH PT0220SSL PT0270SEL PT0270SFG PT0270SRG PT0270SSH PT0270SSL PT0350SEL PT0350SFG PT0350SRG PT0350SSH PT0350SSL SA0220SRG SA0270SRG SA0350SRG SC0220SEL SC0220SFG SC0220SRG SC0220SSH SC0220SSL SC0270SEL SC0270SFG SC0270SRG SC0270SSH SC0270SSL SC0350SEL SC0350SFG SC0350SRG SC0350SSH SC0350SSL ST0220SEL ST0220SFG ST0220SRG ST0220SSH ST0220SSL ST0270SEL ST0270SFG ST0270SRG ST0270SSH ST0270SSL ST0350SEL ST0350SFG ST0350SRG ST0350SSH ST0350SSL Control suffix designation (10th and 11th characters): CD rotary coin drop EY electronic card ready OM OPL micro CX prep for coin MT manual timer ZC NetMaster coin network CY prep for card NC NetMaster coin ZR NetMaster card network EC electronic coin NR NetMaster card ZX NetMaster network, prep for coin EP electronic card reader NX NetMaster, prep for coin ZY NetMaster network, prep for card EX electronic coin ready NY NetMaster, prep for card Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

8 1 2 3 SELECT TEMP INSERT COIN HIGH TEMP PUSH START LOW TEMP NO HEAT Electronic Coin Drop Components Models with EC and EX Control Suffixes MED TEMP START 25 C TMB2920P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

9 Electronic Coin Drop Components REF PART NO. DESCRIPTION COMMENTS NA P Dual Overlay Kit SC and ST models; Text; Includes item 1 NA P Dual Overlay Kit SC and ST models; Icon; Includes item 1 NA P Dual Overlay Kit JC and JT models; Text; Includes item 1 NA P Dual Overlay Kit JC and JT models; Text with infared; Includes item 1 NA P Dual Overlay Kit JC and JT models; Icon; Includes item 1 NA M4686P3 Electronic Coin Control Kit AT, DA, DT, GT, JA, JT, LT, PA, PT, SA and ST models; Does not include overlay or harness NA Multiplier Harness Assembly NA Coin Vault Harness Assembly NA P Control Panel Harness Assembly DA, DC, GC, JA, JC, LC, PA, PC, SA and SC models NA P Control Harness Assembly AT, DT, GT, JT, LT, PT and ST models NA Jumper Calibration Assembly 0220 and 0270 models Coin Identification Paper Overlay LC, LT, SA, SC and ST models; Text Overlay JA, JC and JT models; Text Overlay JA, JC and JT models; Models without coin Overlay JA, JC and JT models; International text Overlay LC, LT, SA, SC and ST models; Icon Overlay PA, PC and PT models; Icon Overlay JA, JC and JT models; Icon Pushbutton Switch 4 D Screw For mounting EDC control Control Plate Assembly Includes studs 6 M414049P Control Kit Model and serial number of machine required - part no longer available for units built prior to 1/1/2004 per field bulletin FB Nut Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

10 Coin Drop Assemblies TMB2738P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

11 Coin Drop Assemblies REF PART NO. DESCRIPTION COMMENTS Electronic Coin Drop Harness P Coin Drop Assembly Token Coin Drop Assembly Token P Coin Drop Assembly Canada; Coin Drop Assembly Canada;.25 and Coin Drop Assembly Australia;.20 and Coin Drop Assembly England; 20 pence and 1 pound P Coin Drop USA; $.25 MZP 2 N/A Coin Drop Assembly Denmark; 1 and 5 DKK Coin Drop Assembly Japan; 100 and 500 yen Coin Drop Assembly Korea; 100 and 500 won 2 N/A Coin Drop Assembly New Zealand;.20 and P Coin Drop Token not available; Replacement for 38963P Coin Drop only 2 N/A Coin Drop Assembly Taiwan; 5 NT and 10 NT; Dual drop Coin Drop Assembly Israel; Shekel Coin Drop Assembly Japan; 100 yen 2 CK077 Coin Drop Kit Taiwan; 10 NT Coin Drop Assembly Korea; 100 and 500 won Coin Drop Assembly Euro;.20 and Coin Drop Assembly Euro;.50 and P Coin Drop USA; $.25 and $1.00; Dual drop P Opto Coupler P Wire Guard N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

12 SELECT TEMP INSERT CARD HIGH TEMP PUSH START LOW TEMP NO HEAT System INSERT CARD HERE Card Reader Components Models with EP and EY Control Suffixes MED TEMP START CardMate T444PZ3A_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

13 Card Reader Components REF PART NO. DESCRIPTION COMMENTS NA Card Reader Harness Assembly NA P Control Panel Harness Assembly DA, DC, GC, JA, JC, LC, PA, PC, SA and SC models NA P Control Harness Assembly AT, DT, GT, JT, LT, PT and ST models NA Jumper Calibration Assembly 0220 and 0270 models 1 N/A Overlay ST models 1 N/A Overlay JT models Pushbutton Switch Control Plate Assembly Includes studs 4 M414049P Control Kit 5 N/A Card Reader Mounting Bracket P Card Reader Nut 8 N/A Chassis Mounting Bracket 9 D Screw For mounting electronic control N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

14 HIGH LOW SELECT TEMP INSERT COIN PUSH START Electromechanical Coin Drop Components Models with CD Control Suffix TEMPERATURE PUSH TO START TMB1958P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

15 Electromechanical Coin Drop Components REF PART NO. DESCRIPTION COMMENTS NA M Shadow Box Clip For trim pieces NA M4688P3 Rotary Coin Drop Control Kit Does not include overlay, temperature knob or harness NA Control Panel Harness Assembly Models through Serial No NA Control Panel Harness Models starting Serial No ; For time delay board NA Jumper Configuration Assembly 0220 and 0270 models NA Jumper Configuration Assembly 0350 models Nut Mounting Bracket Models through Serial No Mounting Bracket Models starting Serial No Circuit Board Support 4 M Relay Models through Serial No M Screw Models through Serial No P Timer Control Assembly P Thermostat Module 8 M Washer For coin drop mounting P Temperature Kit Potentiometer Timer Motor CD control suffix; 24 Volt/60 Hertz Timer Motor CD control suffix; 24 Volt/50 Hertz Rotary Drop Shroud Control Plate Assembly With studs Overlay SA, SC and ST models; Text Overlay JA, JC and JT models; Text Overlay SA, SC and ST models; Icon Overlay JA, JC and JT models; Icon Indicator Light Start Switch Temperature Knob SA, SC and ST models 16 N/A Temperature Knob JA, JC and JT models Mounting Bracket N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

16 HIGH LOW SELECT TEMP INSERT COIN PUSH START Rotary Coin Drop Assemblies Models with CD Control Suffix TEMPERATURE PUSH TO START TMB1958PA_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

17 Rotary Coin Drop Assemblies REF PART NO. DESCRIPTION COMMENTS 1 N/A Coin Meter 24 Volt; Australian; P Coin Meter 24 Volt; Australian; P Coin Meter 24 Volt; USA; $ P Coin Meter 24 Volt/60 Hertz; Token P Coin Meter 24 Volt/60 Hertz; Token Coin Meter 24 Volt; South Africa;.20 1 N/A Coin Meter 24 Volt; England; 20 pence 1 N/A Coin Meter 24 Volt; Denmark; 1 DKK 1 M Coin Meter 24 Volt; Token N/A Coin Meter 24 Volt/50 Hertz; Token Coin Meter 24 Volt; Euro;.20 1 N/A Coin Meter 24 Volt; Euro;.50 N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

18 1 4 HIGH LOW Manual Dual Timer Controls Models with MT Control Suffix HEAT COOL PUSH TO START DOWN TEMPERATURE T142K_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

19 Manual Dual Timer Controls REF PART NO. DESCRIPTION COMMENTS NA M4690P3 Manual Timer Control Kit Does not include overlay, temperature knob or harness NA P Control Panel Harness Assembly Models through June 1998 NA P Control Panel Harness Models starting June 1998 NA Jumper Configuration Assembly 0220 and 0270 models NA Jumper Configuration Assembly 0350 models Mounting Bracket Models through Serial No Mounting Bracket Models starting Serial No Nut Circuit Board Support 4 M Relay 24 Volt/50 or 60 Hertz/1 Phase P Timer Control Assembly P Thermostat Module Temperature control board Mounting Bracket 8 M Nut P Temperature Kit Potentiometer Temperature Knob AT, DT and ST models 10 N/A Temperature Knob JT models Control Plate Assembly Includes studs Overlay AT, DA, DC, DT, SA, SC and ST models; Text Overlay AT, DA, DC, DT, SA, SC and ST models; Icon Overlay JA, JC and JT models; Text Overlay PA, PC and PT models; Icon 12 N/A Overlay JA, JC and JT models; Icon Indicator Light Heat and cooling Timer Knob AT, DT and ST models 14 M Knob Timer; JT models Start Switch Rocker 16 M Screw 17 N/A Timer Heat; 50 Hertz; 60 minute; 24 Volt P Timer Heat; 60 Hertz; 60 minute; 24 Volt 18 M Screw 19 M412079P Timer Cooling; 50 Hertz; 15 minute; 24 Volt P Timer Cooling; 60 Hertz; 15 minute; 24 Volt N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

20 HIGH STOP/RESET TEMP DISPLAY DRYING AUTO CONDITION LESS SAVE CUSTOM PROG OPL Microprocessor Controls Models with OM Control Suffix ON / SELECT MEDIUM MED LOW START STATUS LOW COOL DOWN PROGRAM NO HEAT F/ C SIGNAL DOOR OPEN CUSTOM AUTO * SPECIAL CYCLE AUTO TEMP MORE + -- TIME * SPECIAL TIME COOL DOWN T478PZ3A_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

21 OPL Microprocessor Controls REF PART NO. DESCRIPTION COMMENTS NA M4689P3 Electronic OPL Control Kit AT, DA, DT, GT, JA, JT, LT, PA, PT, SA and ST models; Dual secondary transformers (M for VAC and M for VAC) must be used with this kit; Does not include overlay or harness NA M4695P3 Electronic OPL Control Kit DC, GC, JC, LC, PC and SC models NA P Control Panel Harness Assembly AT, DT, GT, JT, LT, PT and ST models NA Control Panel Harness Assembly DA, DC, GC, JA, JC, LC, PA, PC, SA and SC models NA Jumper Calibration Assembly 0220 and 0270 models NA Jumper Calibration Assembly 0350 models Overlay AT, DA, DC, DT, LC, SA, SC and ST models; Nonreversing; Icon and text Overlay AT, DA, DC, DT, SA, SC and ST models; Reversing; Icon and text Overlay AT, DA, DC, DT, LT, SA, SC and ST models; Nonreversing; Icon Overlay AT, DA, DC, DT, SA, SC and ST models; Reversing; Icon Overlay JA, JC and JT models; Nonreversing; Icon and text Overlay JA, JC and JT models; Nonreversing; Icon and text Overlay JA, JC and JT models; Reversing; Icon Overlay JA, JC and JT models; Reversing; Icon Overlay PA, PC and PT models; Reversing; Icon Overlay PA, PC and PT models; Icon Control Plate Assembly AT, DT, JT, LT and ST models; With studs Control Plate Assembly DA, DC, JA, JC, LC, SA and SC models; With studs Nut Mounting Bracket 5 M Screw 6 M Relay Circuit Board Support P Control Kit Fuse 1.25 Amp Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

22 1 2 3 SELECT TEMP INSERT CARD PUSH START Card Reader for NetMaster Models J and S Models with NR, NY, ZR and ZY Control Suffixes TMB369P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

23 Card Reader for NetMaster Models REF PART NO. DESCRIPTION COMMENTS NA Mounting Plate Use with Control Plate Assembly NA P Control Panel Harness Assembly JT and ST models NA Control Panel Harness Assembly JA, JC, SA and SC models NA Jumper Calibration Assembly 0220 and 0270 models NA Jumper Calibration Assembly 0350 models NA Card Reader Network Harness ZR and ZY control suffixes Assembly NA Card Reader Harness Assembly NR and NY control suffixes 1 N/A Overlay ST models; Card reader ready Overlay ST models; Card reader 1 N/A Overlay JT models; Card reader 1 N/A Overlay JT models; Card reader ready Pushbutton Switch 3 N/A Control Plate Assembly Card reader models Control Plate Assembly Card ready models 4 D Screw 5 D505905P Control Kit 6 D510068P Card Reader and Bracket Assembly N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

24 1 SELECT TEMP 2 INSERT CARD 3 PUSH START 25 C Coin Drop Components for NetMaster Models J and S Models with NC, NX, ZC and ZX Control Suffixes TMB370P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

25 Coin Drop Components for NetMaster Models REF PART NO. DESCRIPTION COMMENTS NA M4686P3 Electronic Coin Control Kit JA, JT, SA and ST models; Does not include overlay or harness NA P Control Panel Harness Assembly JT and ST models NA Control Panel Harness Assembly JA, JC, SA and SC models NA Jumper Calibration Assembly 0220 and 0270 models NA Jumper Calibration Assembly 0350 models NA Main Harness Assembly NA P Jumper Calibration Assembly Overlay ST models; Single drop Overlay ST models; Dual drop Overlay JT models; Single drop Overlay JT models; Dual drop Pushbutton Switch Control Plate Assembly 4 D Screw For mounting NetMaster control 5 D505905P Control Kit Nut Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

26 1 2 3 SELECT TEMP INSERT COIN PUSH START HIGH TEMP MED TEMP START LOW TEMP NO HEAT 25 C Network Board for NetMaster Models J and S Models with ZC, ZR, ZX and ZT Control Suffixes TMB375P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

27 Network Board for NetMaster Models REF PART NO. DESCRIPTION COMMENTS NA Network Wire Harness Assembly P Network Board Assembly Screw Network Plug Support Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

28 Communication Board for NetMaster Models J and S Models with ZC, ZR, ZX and ZY Control Suffixes H UPPER/SINGLE LOWER H TMB1935P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

29 Communication Board for NetMaster Models REF PART NO. DESCRIPTION COMMENTS NA Communication Wire Harness Assembly NA Communication Harness Assembly NA P Network Board For desktop PC NA Network Cable For laptop PC NA Communication Board P Communication Board PC Board Standoff 4 per machine Circuit Data Connector Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

30 1 2 3 SELECT TEMP INSERT COIN PUSH START HIGH TEMP MED TEMP START LOW TEMP NO HEAT 25 C Cabinet Front Components (Drawing 1 of 2) TMB1855P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

31 Cabinet Front Components (Drawing 1 of 2) REF PART NO. DESCRIPTION COMMENTS NA *P False Front 0220 and 0270 models; 72 inches NA False Front 0220 and 0270 models; 72 inches; Stainless steel NA *P False Front Assembly 0220 and 0270 models; 76 inches NA P False Front 0220 and 0270 models; 76 inches; Stainless steel NA *P False Front 0350 models; 72 inches NA P False Front Assembly 0350 models; 72 inches; Stainless steel NA *P False Front Assembly 0350 models; 76 inches NA P False Front Assembly 0350 models; 76 inches; Stainless steel *P Front Panel Assembly DA, DT, GT, JA, JT, LT, PA, PT, SA and ST 0220 and 0270 models with CD and EC control suffixes; Coin P Front Panel Assembly DA, DT, GT, JA, JT, LT, PA, PT, SA and ST 0220 and 0270 models with CD and EC control suffixes; Coin; Stainless steel 1 N/A Front Panel Assembly DA, DT, GT, JA, JT, LT, PA, PT, SA and ST 0220 and 0270 models with MT and OM control suffixes; OPL P Front Panel Assembly DA, DT, GT, JA, JT, LT, PA, PT, SA and ST 0220 and 0270 models with MT and OM control suffixes; OPL; Stainless steel *P Front Panel Assembly 0220 and 0270 models with EP control suffix; Card reader P Front Panel Assembly 0220 and 0270 models with EP control suffix; Card reader; Stainless steel *P Front Panel Assembly DC, GC, JC, PC and SC 0220 and 0270 models with CD and EC control suffixes; Coin Front Panel Assembly DC, GC, JC, PC and SC 0220 and 0270 models with CD and EC control suffixes; Coin; Stainless steel 1 N/A Front Panel Assembly DC, GC, JC, PC and SC 0220 and 0270 models with MT and OM control suffixes; OPL Front Panel Assembly DC, GC, JC, PC and SC 0220 and 0270 models with MT and OM control suffixes; OPL; Stainless steel *P Front Panel Assembly AT, DA, DT, JA, JT, LT, PA, PT, SA and ST 0350 models with CD and EC control suffixes; Coin Front Panel Assembly AT, DA, DT, JA, JT, LT, PA, PT, SA and ST 0350 models with CD and EC control suffixes; Coin; Stainless steel *P Front Panel Assembly AT, DA, DT, JA, JT, LT, PA, PT, SA and ST 0350 models with MT and OM control suffixes; OPL Front Panel Assembly AT, DA, DT, JA, JT, LT, PA, PT, SA and ST 0350 models with MT and OM control suffixes; OPL; Stainless steel * Front Panel Assembly 0350 models with EP control suffix; Card reader Front Panel Assembly 0350 models with EP control suffix; Card reader; Stainless steel *P Front Panel Assembly DC, JC, LC, PC and SC 0350 models with CD and EC control suffixes; Coin Front Panel Assembly DC, JC, LC, PC and SC 0350 models with CD and EC control suffixes; Coin; Stainless steel * Front Panel Assembly DC, JC, LC, PC and SC 0350 models with MT and OM control suffixes; OPL P Front Panel Assembly DC, JC, LC, PC and SC 0350 models with MT and OM control suffixes; OPL; Stainless steel P Front Panel Seal * Add Letter To Designate Color. L - Almond Q - Bisque W - White N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

32 1 2 3 SELECT TEMP INSERT COIN PUSH START HIGH TEMP MED TEMP START LOW TEMP NO HEAT 25 C Cabinet Front Components (Drawing 2 of 2) TMB1859P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

33 Cabinet Front Components (Drawing 2 of 2) REF PART NO. DESCRIPTION COMMENTS NA Expansion Clip For front panel screws NA M Shadow Box Clip For trim pieces NA Coin Vault Switch Harness Assembly NA Emergency Stop Switch Harness Assembly NA Emergency Stop Switch Harness Assembly DC, GC, JC, LC, PC and SC models with MT control suffix; 2 pole DC, GC, JC, LC, PC and SC models with MT and OM control suffixes * Control Panel DT and ST 0220 and 0270 models; Flat top Control Panel DT and ST 0220 and 0270 models; Flat top; Stainless steel *P Control Panel Kit JT 0220 and 0270 models; Flat top P Control Panel Kit JT 0220 and 0270 models; Flat top; Stainless steel * Control Panel DT and ST 0350 models; Flat top Control Panel DT and ST 0350 models; Flat top; Stainless steel *P Control Panel Kit JT 0350 models; Flat top P Control Panel Kit JT 0350 models; Flat top; Stainless steel B Control Panel LT 0220 and 0270 models; Black B Control Panel LC and LT 0350 models; Black Control Trim JA, JC and JT models Control Trim DA, DC, DT, SA, SC and ST models Screw Screw Panel Locator Nut DA, DC, JA, JC, SA and SC models Front Panel Insulation 0350 models Front Panel Insulation 0220 and 0270 models Door Switch DA, DC, GC, JA, JC, LC, PA, PC, SA and SC models Door Switch Bracket DA, DC, GC, JA, JC, LC, PA, PC, SA and SC models 10 M Screw DA, DC, JA, JC, SA and SC models 11 F Washer DA, DC, JA, JC, SA and SC models Screw DA, DC, JA, JC, SA and SC models Pushbutton Switch Key RL002; For use on control panel and lint screen Key RL001; For use on control panel only P Lock, Key and Nut Kit RL002; For use on control panel and lint screen P Lock, Key and Nut Kit RL001; For use on control panel only Coin Vault Trim AT, SA, SC and ST models; Black Coin Vault Trim JA, JC and JT models; Gray 16 N/A Coin Vault Trim PA, PC and PT models; White 17 M Pop Rivet 18 M Door Latch Nameplate Overlay SA, SC and ST models Nameplate Overlay DA, DC and DT models Nameplate Overlay AT models Nameplate Bezel DA, DC, DT, SA, SC and ST models * Add Letter To Designate Color. L - Almond Q - Bisque W - White N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

34 1 2 3 HIGH TEMP MED TEMP START LOW TEMP NO HEAT 25 C Lower Cabinet Front Components TMB1938P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

35 Lower Cabinet Front Components REF PART NO. DESCRIPTION COMMENTS NA M4379P4 Tumbler Dolly Kit Handle and Caps Assembly DA, DC, DT, LT, SA, SC and ST 0220 and 0270 models; Black Handle and Caps Assembly JA, JC and JT 0220 and 0270 models; Dark gray Handle and Caps Assembly DA, DC, DT, LC, LT, SA, SC and ST 0350 models; Black Handle and Caps Assembly JA, JC and JT 0350 models; Dark gray *P Lint Panel Assembly 0220 and 0270 models with CD, EC and EP control suffixes; Coin; Includes items 2, 8 and P Lint Panel Assembly 0220 and 0270 models with CD, EC and EP control suffixes; Coin; Stainless steel * Lint Panel Assembly JA, JC and JT 0220 and 0270 models; Coin; Includes items 2, 8 and * Lint Panel Assembly JA, JC and JT 0350 models; Coin * Lint Panel Assembly JA, JC and JT 0350 models; OPL Lint Panel Assembly JA, JC and JT 0350 models; OPL; Stainless steel Lint Panel Assembly JA, JC and JT 0220 and 0270 models; Coin; Stainless steel 2 N/A Lint Panel Assembly 0220 and 0270 models with MT and OM control suffixes; OPL Lint Panel Assembly 0220 and 0270 models with MT and OM control suffixes; OPL; Stainless steel 2 N/A Lint Panel Assembly 0350 models with CD, EC and EP control suffixes; Coin P Lint Panel Assembly 0350 models with CD, EC and EP control suffixes; Coin; Stainless steel 2 N/A Lint Panel Assembly 0350 models with MT and OM control suffixes; OPL Lint Panel Assembly 0350 models with MT and OM control suffixes; OPL; Stainless steel Nut Roller Catch Wheel Roller Catch Spacer Panel Locator Screw P Lint Panel Gasket Screw Roller Catch Arm Screw For attaching handle Pop Rivet For attaching kickplate; Black Pop Rivet For attaching kickplate; Gray Kickplate DA, DC, DT, LT, SA, SC and ST 0220 and 0270 models; Black Kickplate JA, JC and JT 0220 and 0270 models; Dark gray Kickplate DA, DC, DT, LC, LT, SA, SC and ST 0350 models; Black Kickplate JA, JC and JT 0350 models; Dark gray * Add Letter To Designate Color. L - Almond Q - Bisque W - White N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

36 Cabinet Components TMB1856P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

37 Cabinet Components REF PART NO. DESCRIPTION COMMENTS NA P High Limit Harness NA Jumper Bypass Assembly AT, DA, DT, GT, JA, JT, LT, PA, PT, SA and ST models; Card reader models with MT and OM control suffixes Baffle Gasket Upper; inches; Center partition Partition Baffle Upper left Thermal Shield Partition Baffle 0350 models; Lower left Nut Partition Baffle Upper right Flat Top 0270 models; Galvanized Flat Top 0350 models; Galvanized 7 N/A Flat Top 0220 models; Galvanized Coin Chute Assembly CD and EC control suffixes Coin Vault Assembly CD and EC control suffixes Nut Leveling Leg Hole Plug 13 M Screw Lint Panel Switch Bracket Lint Screen Center Cylinder Seal Assembly 0220 and 0270 models Center Cylinder Seal Assembly 0350 models Screw Clip P Roller Bearing Assembly Roller Shaft Baffle Gasket 10.5 inches Baffle Gasket inches Baffle Gasket 8.75 inches 22 N/A Partition Baffle 0350 models; Lower right Lint Screen Clip 0220 models Lint Panel Switch Nut Hold-Down Clip 0270 and 0350 models N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

38 Door and Hinge Components TMB1939P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

39 Door and Hinge Components REF PART NO. DESCRIPTION COMMENTS Door Assembly AT, LC, LT, SA, SC and ST models; Excludes hinge P Door Assembly JA, JC and JT models; Excludes hinge Door Assembly DA, DC and DT models; Excludes hinge Door Assembly GC, GT, PA, PC and PT models; Excludes hinge Door Ring Gasket * Door Hinge 0350 models Door Hinge 0350 models; Stainless steel W Door Hinge 0220 and 0270 models Door Hinge 0220 and 0270 models; Stainless steel Screw 5 D Screw 6 M4772P3 Cam and Hinge Kit Upper or lower; Includes item Pin Door Hinge Lug Assembly Screw Screw P Door Glass Seal Kit P Door Glass JA, JC and JT models 12 M400784P Door Glass DA, DC, DT, LC, LT, SA, SC and ST models P Door Switch Actuator Kit Nut P Door Handle AT, DA, DC, DT, SA, SC and ST models P Replacement Door Handle Kit JA, JC and JT models Door Handle L models 15 M Door Handle PA, PC and PT models 16 M Nut For door strike; Mounts between door strike screw and door handle Screw Use with Door Handle 17 M Screw Use with P Replacement Door Handle Kit Screw Use with Door Handle 17 M Screw Use with M Door Handle 18 M Screw * Add Letter To Designate Color. L - Almond Q - Bisque W - White Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

40 Cylinder Components - Models Through Serial No. 9712xxxx TMB2463P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

41 Cylinder Components - Models Through Serial No. 9712xxxx REF PART NO. DESCRIPTION COMMENTS NA D511637P Adhesive For item 1 NA Bolt Cylinder to trunnion/cylinder channel NA M Washer Cylinder to trunnion/cylinder channel NA 263P4 Cylinder Guide Tool NA Nut Cylinder to trunnion/cylinder channel NA Rear Cylinder Seal Support 0220 and 0270 models NA Rear Cylinder Seal Support 0350 models NA P Drywall Screw Magnet Kit P Rear Cylinder Seal 0350 models; Rear Rear Cylinder Seal 0220 and 0270 models 2 M4960P3 Trunnion and Seal Kit 3 M4960P3 Trunnion and Seal Kit Cylinder Bearing Stud Plate Assembly Rear Cylinder Bearing Housing Support Bearing 7 M Nut 8 M Nut 9 M Washer Nut Cylinder Channel 0350 models 11 N/A Cylinder Channel 0220 and 0270 models P Cylinder, Trunnion and Seal Kit 0220 models; Includes Cylinder Channel; Galvanized P Cylinder, Trunnion and Seal Kit 0220 models; Includes Cylinder Channel; Stainless steel P Cylinder, Trunnion and Seal Kit 0270 models; Includes Cylinder Channel; Galvanized P Cylinder, Trunnion and Seal Kit 0270 models; Includes Cylinder Channel; Stainless steel P Cylinder, Trunnion and Seal Kit 0350 models; Includes Cylinder Channel; Galvanized P Cylinder, Trunnion and Seal Kit 0350 models; Includes Cylinder Channel; Stainless steel End Cap Cylinder baffle Screw N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

42 Cylinder Components - Models Starting Serial No. 9712xxxx TMB2464P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

43 Cylinder Components - Models Starting Serial No. 9712xxxx REF PART NO. DESCRIPTION COMMENTS NA D511637P Adhesive For item 1 NA 263P4 Cylinder Guide Tool NA Rear Cylinder Seal Support 0220 and 0270 models NA Rear Cylinder Seal Support 0350 models P Rear Cylinder Seal 0350 models Rear Cylinder Seal 0220 and 0270 models 2 M4960P3 Trunnion and Seal Kit Cylinder Bearing Stud Plate Assembly Rear Cylinder Bearing Housing Support Bearing 6 M Nut 7 M Nut 8 M Washer Nut Screw 10 required Rear Cylinder Channel Plate 0220 and 0270 models Rear Cylinder Channel Plate 0350 models 12 M4960P3 Trunnion and Seal Kit Rear Cylinder Channel 0220 and 0270 models Rear Cylinder Channel 0350 models P Cylinder, Trunnion and Seal Kit 0220 models; Includes Cylinder Channel; Galvanized P Cylinder, Trunnion and Seal Kit 0220 models; Includes Cylinder Channel; Stainless steel P Cylinder, Trunnion and Seal Kit 0270 models; Includes Cylinder Channel; Galvanized P Cylinder, Trunnion and Seal Kit 0270 models; Includes Cylinder Channel; Stainless steel P Cylinder, Trunnion and Seal Kit 0350 models; Includes Cylinder Channel; Galvanized P Cylinder, Trunnion and Seal Kit 0350 models; Includes Cylinder Channel; Stainless steel End Cap Screw Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

44 Drive Motor Components TMB1857P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

45 Drive Motor Components REF PART NO. DESCRIPTION COMMENTS NA Cylinder Motor Harness Assembly 3 Phase NA P Drive Motor Harness 1 Phase; Nonreversing NA M4853P3 Belt Tension Tool Kit NA M4716P3 Resilient Motor Kit 60 Hertz P Belt 0350 models; inches P Belt 0220 and 0270 models; 94 inches U-Bolt Motor Bracket Spring Axial Plate Screw Motor Bracket Assembly Models through Serial No N/A Motor Bracket Assembly Models starting Serial No Nut Nut Bushing Bolt Single Motor Pivot Shaft Models through Serial No Motor Pivot Shaft Models starting Serial No Motor Pulley 0220 and 0270 models; 60 Hertz Motor Pulley 0350 models; 60 Hertz Motor Pulley 0220 and 0270 models; 50 Hertz Motor Pulley 0350 models; 50 Hertz Nut 2 required U-Bolt Plate 15 M Screw Screw Idler Pivot Bracket Nut P Idler Wheel Assembly N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

46 Drive Motors TMB1857PA_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

47 Drive Motors REF PART NO. DESCRIPTION COMMENTS P Drive Motor Gas and steam models* with: 100 Volt/50 or 60 Hertz/1 Phase, 120 Volt/60 Hertz/1 Phase; Electric models* with: , 240 Volt/60 Hertz/1 or 3 Phase, 200 Volt/50 Hertz/1 or 3 Phase P Drive Motor Kit Gas, steam and electric models* with: 230 or 240 Volt/50 Hertz/1 Phase; Electric models* with: 230 or 240 Volt/50 Hertz/3 Phase P Drive Motor Electric models* with: 230 or 240 Volt/50 Hertz/3 Phase; Gas and steam models* and ** with: 230 or 240 Volt/50 Hertz/3 Phase; Gas and steam models* with: 240 Volt/60 Hertz/3 Phase; Electric models* and ** with: Volt/50 Hertz/3 Phase; Gas and steam models* and ** with: 200 Volt/50 Hertz/3 Phase; Gas, steam and electric models* and ** with: 380 Volt/50 Hertz/3 Phase, Volt/60 Hertz/3 Phase 1 M4716P3 Resilient Motor Kit Gas and steam models** with: 100 Volt/50 or 60 Hertz/1 Phase; Electric models** with: , 240 Volt/60 Hertz/1 or 3 Phase, 200 Volt/50 Hertz/1 or 3 Phase * NOTE: For RG gas models, motor to be used with Motor Pivot Channel (2 pieces - 3 Phase rigid mount, 1 Phase resilient mount) ** NOTE: For FG gas models, motor to be used with Motor Pivot Bracket (1 piece rigid mount) Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

48 Drive Motor and Pulley Assemblies for 0350 Models TMB1857PA_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

49 Drive Motor and Pulley Assemblies for 0350 Models REF PART NO. DESCRIPTION COMMENTS 1 N/A Drive Motor and Pulley Assembly Gas and steam models* with: 110 Volt/50 Hertz/1 Phase; Electric models* with: 200 Volt/50 Hertz/1 or 3 Phase 1 N/A Drive Motor and Pulley Assembly Gas and steam models* with: Volt/50 Hertz/3 Phase 1 N/A Drive Motor and Pulley Assembly Electric models* with: 230 or 240 Volt/50 Hertz/3 Phase; Gas, steam and electric models* with: 230 Volt/50 Hertz/1 or 3 Phase, 240 Volt/50 Hertz/1 Phase Drive Motor and Pulley Assembly Gas and steam models* and** with: 240 Volt/60 Hertz/3 Phase; Gas, steam and electric models* and** with: 460 or 480 Volt/60 Hertz/3 Phase 1 N/A Drive Motor and Pulley Assembly Gas and steam models** with: 100 Volt/50 Hertz/1 Phase; Electric models** with: 200 Volt/50 Hertz/1 or 3 Phase P Drive Motor Assembly Gas and steam models** with: 200 Volt/50 Hertz/3 Phase; Electric models** with: Volt/50 Hertz/3 Phase; Gas, steam and electric models** with: 380 Volt/50 Hertz/3 Phase 1 N/A Drive Motor and Pulley Assembly Gas and steam models** with: 230 or 240 Volt/50 Hertz/3 Phase, 230 Volt/50 Hertz/3 Phase 1 N/A Drive Motor and Pulley Assembly Electric models** with: 230 or 240 Volt/50 Hertz/3 Phase; Gas, steam and electric models** with: 230 Volt/50 Hertz/1 or 3 Phase, 230 or 240 Volt/50 Hertz/1 Phase N/A = Part no longer available * NOTE: For RG gas models, motor to be used with Motor Pivot Channel (2 pieces - 3 Phase rigid mount, 1 Phase resilient mount) ** NOTE: For FG gas models, motor to be used with Motor Pivot Bracket (1 piece rigid mount) Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

50 Blower Components TMB1941P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

51 Blower Components REF PART NO. DESCRIPTION COMMENTS NA Fan Motor Harness Assembly 1 Phase NA Fan Motor Harness Assembly 3 Phase 1 M Thermistor New location for models starting Serial No M Limit Thermostat AT, DC, DT, GC, GT, JC, JT, LC, LT, PC, PT, SC and ST models; New location for models starting Serial No M Manual Reset Thermostat DA, JA, PA and SA models; New location for models starting Serial No Bolt Exhaust Thimble 0220 and 0270 models; 6 inches Exhaust Thimble 0350 models; 8 inches Screw Drive Access Cover 7 M Screw Nut Nut Blower Motor Mounting Plate 11 M Nut 12 M Nut P Blower Assembly Panel Locator Screw 16 D Hinge Damper and Hinge Exhaust Assembly Screw 19 M Washer Key Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

52 Fan Motors for 0220 and 0270 Models TMB1941PA_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

53 Fan Motors for 0220 and 0270 Models REF PART NO. DESCRIPTION COMMENTS P Blower Motor Gas and steam models with: 100 Volt/50 or 60 Hertz/1 Phase, 120 Volt/60 Hertz/1 Phase; Electric models with: 200, 208 or 240 Volt/60 Hertz/1 or 3 Phase, 200 Volt/50 Hertz/3 Phase P Blower Motor Gas and steam models with: 200 Volt/50 Hertz/3 Phase, 240 Volt/50 or 60 Hertz/3 Phase, 230 Volt/50 Hertz/3 Phase; Electric models with: Volt/50 Hertz/3 Phase; Gas, steam and electric models with: 380 Volt/50 Hertz/3 Phase, 460 or 480 Volt/60 Hertz/3 Phase P Blower Motor Kit Gas, steam and electric models with: 230 or 240 Volt/50 Hertz/1 Phase; Electric models with: 230 or 240 Volt/50 Hertz/3 Phase Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

54 Fan Motors for 0350 Models TMB1941PA_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

55 Fan Motors for 0350 Models REF PART NO. DESCRIPTION COMMENTS P Blower Motor Gas and steam models with: 100 Volt/50 or 60 Hertz/1 Phase, 120 Volt/60 Hertz/1 Phase; Electric models with: 200 Volt/50 or 60 Hertz/1 or 3 Phase, 208 Volt/60 Hertz/1 or 3 Phase, 240 Volt/60 Hertz/1 or 3 Phase P Blower Motor Gas and steam models with: 200 Volt/50 Hertz/3 Phase, 240 Volt/50 or 60 Hertz/3 Phase, 230 Volt/50 Hertz/3 Phase; Electric models with: Volt/50 Hertz/3 Phase; Gas, steam and electric models with: 380 Volt/50 Hertz/3 Phase, Volt/60 Hertz/3 Phase P Blower Motor Kit Gas, steam and electric models with: 230 Volt/50 Hertz/1 or 3 Phase, 240 Volt/50 Hertz/1 Phase; Electric models with: 230 or 240 Volt/50 Hertz/3 Phase Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

56 Airflow Switch and Gas Burner Components T500PZ3B_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

57 Airflow Switch and Gas Burner Components REF PART NO. DESCRIPTION COMMENTS Screw 2 M Limit Thermostat 50 or 60 Hertz 2 M Limit Thermostat AT, DC, DT, GC, GT, JC, JT, LC, LT, PC, PT, SC and ST gas models starting Serial No Manual Reset Thermostat DA, JA, PA and SA models starting Serial No M Manual Reset Thermostat DA, JA, PA and SA models Screw 4 M Screw Airflow Switch Bracket 6 M Nut P Airflow Switch Kit Includes items 3-6 and Airflow Switch Vane Airflow Switch Airflow Switch Cover Burner Grill P Gas Burner Igniter Cover Screw P Spark Electrode Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

58 Gas Burner Housing T465P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

59 Gas Burner Housing REF PART NO. DESCRIPTION COMMENTS 1 M4747P3 Valve Bracket and Cover Kit Screw Burner Grill Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

60 Gas Valve and Piping TMB1942P_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

61 Gas Valve and Piping REF PART NO. DESCRIPTION COMMENTS NA M Gas Valve Harness Assembly NA M N.G. Heater Assembly NA M4699P3 L.P. Conversion Kit 0220SFG models: 0-2,000 feet at 67,000 Btu input; 0220SRG models: 0-2,000 feet at 64,000 Btu input NA M4703P3 L.P. Conversion Kit 0270SFG models: 0-2,000 feet at 88,000 Btu input; 0270SRG models: 0-2,000 feet at 73,000 Btu input NA M4706P3 L.P. Conversion Kit 0270SFG models: 8,001-10,000 feet at 88,000 Btu input; 0270SRG models: 8,001-10,000 feet at 73,000 Btu input NA M4711P3 L.P. Conversion Kit 0350SFG models: 0-2,000 feet at 107,000 Btu input; 0350SRG models: 0-2,000 feet at 90,000 Btu input NA M4729P3 Down Rated Burner Kit 0220SFG models: 0-10,000 feet at 67,000 Btu input; 0270SFG models: 0-10,000 feet at 88,000 Btu input; 0350SFG models: 0-10,000 feet at 107,000 Btu input NA M4733P3 N.G. Valve Conversion Kit Models through Serial No NA M4734P3 L.P. Valve Conversion Kit Models through Serial No NA O-Ring NA Gas Valve Kit To replace item Spud Adapter Gas Valve Coil 24 Volt P N.G. Valve Models starting Serial No P L.P. Valve Models starting Serial No M412562P Gas Shut-Off Valve Manual Pipe Nipple 1/2 NPT 6 H Union 7 N/A Pipe Nipple Elbow Adapter BPT/NPT Screw Screw Gas Valve Bracket Primary Air Adjustment Sleeve N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

62 Burner Orifice for Liquid Petroleum Gas Non-CE Models TMB1942PA_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

63 Burner Orifice for Liquid Petroleum Gas REF PART NO. DESCRIPTION COMMENTS 1 M Burner Orifice Drill no. 41 (2.4 mm); 0220SFG models: 0-2,000 feet; 0350SRG models: 6,001-8,000 feet 1 M Burner Orifice Drill no. 42 (2.4 mm); 0220SFG models: 2,001-6,000 feet; 0220SRG models: 0-2,000 feet; 0270SRG models: 2,001-6,000 feet; 0350SRG models: 8,001-10,000 feet 1 M Burner Orifice Drill no. 43 (2.3 mm); 0220SFG models: 6,001-8,000 feet; 0220SRG models: 2,001-6,000 feet; 0270SRG models: 6,001-8,000 feet 1 M Burner Orifice Drill no. 44 (2.2 mm); 0220SFG models: 8,001-10,000 feet; 0220SRG models: 6,001-8,000 feet; 0270SRG models: 8,001-10,000 feet 1 M Burner Orifice Drill no. 46 (2.1 mm); 0220SRG models: 8,001-10,000 feet Burner Orifice Drill size 7/64 (2.8 mm); 0270SFG models: 0-2,000 feet 1 M Burner Orifice Drill no. 36 (2.7 mm); 0270SFG models: 2,001-4,000 feet; 0350SFG models: 8,001-10,000 feet; 0350SRG models: 0-2,000 feet 1 N/A Burner Orifice Drill no. 37 (2.6 mm); 0270SFG models: 4,001-6,000 feet 1 M Burner Orifice Drill no. 38 (2.6 mm); 0270SFG models: 6,001-8,000 feet; 0350SRG models: 2,001-4,000 feet 1 M Burner Orifice Drill no. 40 (2.5 mm); 0270SFG models: 8,001-10,000 feet; 0270SRG models: 0-2,000 feet 1 M Burner Orifice Drill no. 42 (2.4 mm); 0350SFG models: 0-2,000 feet 1 N/A Burner Orifice Drill no. 32 (2.9 mm); 0350SFG models: 2,001-6,000 feet 1 M Burner Orifice Drill no. 34 (2.8 mm); 0350SFG models: 6,001-8,000 feet 1 M Burner Orifice Drill no. 39 (2.5 mm); 0350SRG models: 4,001-6,000 feet N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

64 Burner Orifice for Natural Gas Non-CE Models TMB1942PA_ Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT

65 Burner Orifice for Natural Gas REF PART NO. DESCRIPTION COMMENTS 1 M Burner Orifice 1 M Burner Orifice Drill no. 22 (4.0 mm); 0220SFG models: 0-2,000 feet; 0270SRG models: 2,001-4,000 feet 1 M Burner Orifice Drill no. 23 (3.9 mm); 0220SFG models: 2,001-4,000 feet 1 M Burner Orifice Drill no. 25 (3.8 mm); 0220SFG models: 4,001-6,000 feet 1 M Burner Orifice Drill no. 27 (3.7 mm); 0220SFG models: 6,001-8,000 feet; 0220SRG models: 4,001-6,000 feet 1 M Burner Orifice Drill no. 28 (3.6 mm); 0220SFG models: 8,001-10,000 feet; 0220SRG models: 6,001-8,000 feet; 0270SRG models: 8,001-10,000 feet 1 M Burner Orifice Drill no. 24 (3.9 mm); 0220SRG models: 0-2,000 feet; 0270SRG models: 4,001-6,000 feet 1 M Burner Orifice Drill no. 25 (3.8 mm); 0220SRG models: 8,001-10,000 feet 1 M Burner Orifice Drill no. 15 (4.6 mm); 0270SFG models: 0-2,000 feet; 0350SRG models: 0-2,000 feet 1 M Burner Orifice Drill no. 16 (4.5 mm); 0270SFG models: 2,001-4,000 feet; 0350SRG models: 2,001-4,000 feet 1 M Burner Orifice Drill no. 17 (4.4 mm); 0270SFG models: 4,001-6,000 feet; 0350SFG models: 8,001-10,000 feet; 0350SRG models: 4,001-6,000 feet 1 M Burner Orifice Drill no. 19 (4.2 mm); 0270SFG models: 6,001-8,000 feet; 0350SRG models: 6,001-8,000 feet 1 M Burner Orifice Drill no. 20 (4.1 mm); 0270SFG models: 8,001-10,000 feet; 0270SRG models: 0-2,000 feet; 0350SRG models: 8,001-10,000 feet 1 M Burner Orifice Drill no. 26 (3.7 mm); 0220SFG models: 2,001-4,000 feet; 0270SRG models: 6,001-8,000 feet Burner Orifice Drill size 5 mm; 0350SFG models: 0-2,000 feet 1 N/A Burner Orifice Drill no. 11 (4.9 mm); 0350SFG models: 2,001-4,000 feet 1 M Burner Orifice Drill no. 12 (4.8 mm); 0350SFG models: 4,001-6,000 feet 1 M Burner Orifice Drill no. 14 (4.6 mm); 0350SFG models: 6,001-8,000 feet N/A = Part no longer available Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT