Lexington Valve Parts

Transcription

1 Lexington Valve Parts Chokes 2012 Catalog Phone:

2 TABLE OF CONTENTS Choke Selection Information 3 Positive and Adjustable Chokes 4 How to Order 5 Positive/Adjustable Chokes 6 Choke Beans 9 Threaded Choke Assemblies FMC Profile 10 Flanged Choke Assemblies FMC Profile 12 Ceramic Choke Beans 15 Parts for Adjustable Chokes 16 Hydraulic Drilling Chokes 17 Heater Chokes 19 Positive and Adjustable Chokes w/ Removable Hammer Wing 21 Type H-H2 Adjustable Chokes Max 2 Orifice 22 Type H-H2 Positive Chokes Max 2 Orifice 23 Type H-H2 Adjustable Chokes Max 1 Orifice 24 Steam Choke Assembly 3000 Lbs. CWP 25 Indicatior & Packing Detail/Procedures FMC H2 Adjustable Chokes 27 Terms and Conditions 28 Product Warranty 28 2

3 Choke Selection Information Lexington Valve Parts objective is to manufacture quality products at competitive prices. The company offers chokes of actual OEM dimensional standards as well as those of custom dimensions. All manufacturing is accomplished with the use of modern CNC equipment and tooling. In addition to choke assemblies, parts for many types of chokes are also manufactured here. The manufacturing company employs a quality system which is approved by the American Petroleum Institute under License #6A Products with ABS and DNV certification may also be provided upon request. Lexington Valve Parts. has full capabilities of satisfying all of your manufacturing needs. With so many choices, selection of the proper choke for the job does not have to be difficult. Turn to Lexington Valve Parts, for prompt customer service and a quality manufactured product. Choke Selection Information Lexington Valve Parts, is recognized throughout the oil and gas industry as a manufacturer of quality choke products. Our company produces choke assemblies of the FMC and H2 type profiles which are fully interchangeable with those of other manufacturers of the same. This design is a time proven one which has been employed in many types of service within the industry. Our line of chokes is ideally suited for a broad range of applications. These include wellheads, production manifolds, well testing, choke and kill manifolds, and well clean-up operations. Chokes may be ordered in both positive and adjustable models. Each model utilizes a hammer lug type connection which facilitates the quick changing of flow beans and trims. In addition, each choke is easily converted from positive to adjustable or adjustable to positive while the choke body remains installed in the line. This means more time working and less time waiting as replacement parts are readily available from your local supply store. Your selection of materials for choke bodies include alloy steel and 410 stainless steel. All FMC profile flanged models employ bodies of forged steel construction with integral flanges while fabricated versions are also available. The standard materials used for our threaded bodies are forged alloy steel with carbon steel also available upon request. 3

4 Lexington Valve Parts has full capabilities of satisfying all of your manufacturing needs. Type: Positive and Adjustable Body Design: Angle Type End Connections: 1 LPT, 2 LPT Flanged RTJ and RF Union Ends Design Pressure: 2000 PSI CWP 3000 PSI CWP 5000 PSI CWP 10,000 PSI CWP 15,000 PSI CWP Trim Sizes: 1/2, 3/4, 1, 2 Trim Materials: Alloy Steel, Stellite Stainless Steel, Inconel Stainless Steel Tungsten Carbide Hammerlug bonnet & cap connections Forged Steel bodies Alloy and 410 SS Choice of end connections Available H2S Service (NACE MR-01-75) Easily converted in field Choice of trim materials Choice of orifice sizes Grease fittings on Adj. Model Bonnets Thumb screw for locking stem 1/2 NPT test port on flanged models FMC and H2 profile centerline dimensions Easy to read indicator in 64ths inch Readily available parts Low Maintenance 4

5 How to order Chokes 1. Type of Choke Positive or Adjustable 2. Specify working pressure 3. Type of Inlet and Outlet Connections (Size and Pressure Rating) 4. Specify Trim Size 5. Trim Material (Alloy Steel Tungsten Carbide Inconel Stellite Stainless Steel Note: Beans for Positive Chokes are not furnished with assemblies and must be ordered separately. 5

6 Positive Chokes Positive Chokes are improved from Cameron H2 series positive chokes and suitable for well testing, high pressure drilling and production accompanied with sour gas and/or sand. These positive chokes are designed, manufactured and tested in accordance with API Spec. 6A. Reasonable price and low cost of spares make them the most cost effective positive chokes on the market. 6

7 Part List Item Description Quantity Bottom Top Overall Height (H) 1 HEX BOLT 1 2 WASHER 1 3 HANDLE 1 4 HEX. SOC. SET SOCIETY 1 5 INDICATOR 1 6 BONNET NUT 1 7 BONNET 1 8 NYLON PLUG 1 9 THUMB SCREW 1 10 'O' RING-BONNET 1 11 JUNK RING 2 12 'J' PACKING + BACK-UP RING 1 13 INT. RETAINER RING 1 14 NEEDLE 1 15 SEAT 1 16 GASKET 1 17 BODY 1 7

8 Size & WP Max Orifice Dia 2 1/16 x MM 2 9/16 x MM 3 1/8 x MM 4 1/16 x MM 2 1/16 x MM 2 9/16 x MM 3 1/8 x MM 4 1/16 x MM 2 1/16 x MM 2 9/16 x MM 3 1/8 x MM 4 1/16 x MM 2 1/16 x MM 2 9/16 x MM 3 1/16 x MM 2 1/16 x MM 3 1/16 x MM Features Manufactured and tested in accordance with API 6A. Positive chokes can be assembled as adjustable chokes Available Medium: oil and gas accompanied with sour gas or / and sand Rated Working Pressure: 5,000psi ~ 20,000psi Temperature: K ~ U Material Classes: EE ~ HH End connections: flange, union Product Specification Level: PSL1 ~ PSL4 Performance Requirement: PR1, PR2 8

9 Choke Beans Removable choke beans are same as Cameron H2 Big John. Features Carbide alloy is embedded into choke beans in full length. Available Medium: oil and gas accompanied with sour gas or / and sand 1" Maximum and 2" maximum orifice. Choke bean size: 4/64" ~ 128/64" in minimum steps of 2/64" 9

10 Threaded Choke Assemblies FMC Profile 10

11 H-29 and H-O-60 not acceptable for H2S H-FT-108 & H-N-60 also available with 1 LP connections & ¾ or 1 Trim 11

12 HOUR ANSWER TEL: Flanged Choke Assemblies 12

13 Flanged Choke Assemblies FMC Profile 13

14 2 NOM x 1 MAX H-2-5,000 psi or 10,000 psi 3 NOM x 2 MAX H-2-5,000 psi or 10,000 psi H2 and H2 "Big John" Choke Seats 2 NOM x 1 MAX H-2br * 4/64 64/64 Orifice 2 ¼ Long 1 11/16 Hex 2 NOM x 1 MAX H-2 BIG JOHN * 4/64 64/64 Orifice 6 Long 1 11/16 Hex 3 NOM x 2 MAX H-2 BIG JOHN * 4/64 128/64 Orifice 6 Long 2 ¾ Hex 14

15 Ceramic Choke Beans Ceramic choke beans lined with silicon carbide-boron carbide composite or AL2O3 ceramic are available, especially effictive for sandy oil and gas wells. Features Alloy steel body, ceramic liner is inserted into choke beans in maximum length. Available Medium: oil and gas accompanied with sour gas or / and sand 1" Maximum and 2" maximum orifice. Choke bean size: 4/64" ~ 128/64" in minimum steps of 2/64" Cusomized dimension Rated Working Pressure: 5,000psi ~ 20,000psi Bore Size: all popular Temperature: K ~ U Material Classes: EE ~ HH End connections: flange, union Product Specification Level: PSL1 ~ PSL4 Performance Requirement: PR1, PR2 15

16 Parts for Adjustable Chokes 1 Hydraulic Actuator 18 Screw 35 O-ring 2 Front Retainer 19 Elbow 36 Lower Stabilizer Mount 3 Gate 20 Quick-Connect 37 Upper Stabilizer Mount 4 Rear Retainer 21 Elbow 38 Cap Screw 5 Piston 22 Housing 39 Screw 6 Cover 23 Cover 40 Quick-Connect 7 Actuator Rod 24 Regulator 41 Nipple 8 Actuator Body 25 Spacer Mount 42 Nipple 9 O-ring 26 Spacer 43 Elbow 10 O-ring 27 Adapter 44 Back-Up Ring 11 O-ring 28 Tubing 45 Body 12 O-ring 29 Connector 46 Seat 13 Pipe Bushing 30 Nut 47 O-ring 14 Retainer Ring 31 Retainer Cap 48 Wear Sleeve 15 Locknut 32 Lock Washer 49 Back-Up Ring 16 Cap Screw 33 Screw UTV Packing 17 Lock Washer 34 Back-Up Ring Back-Up Ring 16

17 Hydraulic Drilling Choke 31/16 10/15 PSI Part Description 10 PSI 15 PSI Hydraulic Actuator Front Retainer Gate Rear Retainer Piston Cover Actuator Rod Actuator Body O-ring O-ring O-ring O-ring Pipe Bushing Retaining Ring Lock Nut Cap Screw Lock Washer Screw Elbow Quick-Connect Elbow Housing Cover

18 Regulator Spacer Mount Spacer Adapter Tubing Connector Nut Retainer Cap Lock Washer Cap Screw Back-Up Ring O-ring Lower Stabilizer Mount Upper Stabilizer Mount Cap Screw Screw Quick-Connect Nipple Nipple Elbow Back-Up Ring Body Seat O-RIng Wear Sleeve Back-Up Ring UTV Packing Back-Up Ring

19 Heater Choke The low cost HEATER CHOKE with quality and a time proven design. 19

20 20

21 Positive & Adjustable chokes with removable hammer wing union cage nipple assembly 21

22 Type H-H2 Adjustable Chokes Max 2 Orifice 22

23 Type H-H2 Positive Chokes Max 2 Orifice 23

24 Type H-H2 Adjustable Chokes Max 1 Orifice 24

25 Steam Choke Assembly 3,000 PSI CWP Lexington Valve Parts, Steam Choke uses a non rotating stem with linear motion that would not grab the packing or pull it out of place. When packing needs adjustment simply tighten the choke packing gland as required. The gland is easily accessible as it is externally located. This means minimal time and simple maintenance. 25

26 26

27 Indicator Detail/Procedures FMC H2 Adjustable Chokes 27

28 Terms and Conditions All sales are F.O.B. Factory, unless otherwise expressly stipulated. Our responsibility ceases unop delivery of goods and billing of lading or dock receipt, invoice and supplementary documents to the customer or his/her agent, or upon delivery of the shipment to the carrier. All price quotations are F.O.B Factory, are subject to change without notice, and are for immediate acceptance unless otherwise specified. Delivery dates promised will be kept to the best of our ability, but cannot guaranteed, and Lexington Valve Parts. Will assume no liability for damages arising out of failure to keep delivery date, irrespective of the delay. Purchase orders placed and accepted may be be cancelled with Lexington Valve Parts consent and upon terms which will indemnify Lexington Valve Parts against loss. Product Warranty We warrant products of our manufacture one year from date of shipment to the extent that Lexington Valve Parts, will repair or replace and products of defective workship proven under normal use and service. No other warranty is expressed or implied. We specifically are not responsible for damages or injury, direct or indirect, or for damsges of failure caused by improper installation, operation or misuse. All calims for in-transit shortages, damages or erroneous chagres must be made within thirty (30) days from receipt of shipment and must be accompanied by the packing list covering shipment. Lexington Valve Parts strive to pack and prepare all shipments so that they will not break, rust or deteriorate in transit, but do not guarantee against such damage. All sales made by Lexington Valve Parts, unless otherwise agreed to in writing by an executive officer of the company, are made suject to each and all of the foregoing conditions and the placing of an order, or the accepttance by the cusomer of the above said conditions. 28