JS2 ShoreStation PWC JetStation

Size: px

Start display at page:

Download "JS2 ShoreStation PWC JetStation"

Kerry Riley
5 years ago
Views:

1 JS2 ShoreStation PWC JetStation Assembly Installation & Parts Manual for Stationary/Floating ShoreStation/Universal Dock Systems Floating Dock Installation is shown. (Bumpers shown are optional.) Page 1 Rev C 03/19/2009

The JetStation can be mounted either parallel or perpendicular to the dock system.

2 HA0075 JS2 ShoreStation Floating Dock Mooring Hardware The JS2 ShoreStation Floating Dock Mooring Hardware is used when attaching a JetStation to a ShoreStation floating dock system. It is designed for attaching one unit only. The JetStation can be mounted either parallel or perpendicular to the dock system. Multiple installations require using additional complete JS2 ShoreStation Floating Dock Mooring Hardware systems. Perpendicular Mount Parallel Mount Centerline Diagram A Page 4 Rev C 03/19/2009

3 Page 5 Rev C 03/19/2009

HA0076 JS2 ShoreStation Dock Mooring Hardware Perpendicular Mount 2 - Perpendicular Mount Parallel Mount The

mounting the JetStation perpendicular to the dock.

4 HA0076 JS2 ShoreStation Dock Mooring Hardware Perpendicular Mount 2 - Perpendicular Mount Parallel Mount The HA0076 JS2 ShoreStation Dock Mooring Hardware is used when attaching a JetStation to a ShoreStation stationary dock system. It is designed for attaching either one JetStation in a parallel position with the dock or one JetStation when mounting the JetStation perpendicular to the dock. A second JetStation can be mounted perpendicular to the dock by adding a HA0077 JS2 ShoreStation Dock Additional Mooring Hardware. Diagram A Parallel Mount Perpendicular Mount Midwest Industries, Inc. Ida Grove, IA Page Rev C 03/19/2009

5 Diagram B Page 9 Rev C 03/19/2009

HA0077 JS2 ShoreStation Dock Additional Mooring Hardware The HA0077 JS2 ShoreStation Dock Mooring Hardware is used in conjunction with a HA0076 and allows the attaching of a

Locate the two-plate connectors and four- ½ x 5 9/16 x 3 square U-bolts shown in Diagram B. Place two U-bolts around the 5x2 aluminum tube.

Diagram B 57 ⅜ Centers 2. Position the plate connectors on 57 ⅜ centers as shown in Diagram A.

6 HA0077 JS2 ShoreStation Dock Additional Mooring Hardware The HA0077 JS2 ShoreStation Dock Mooring Hardware is used in conjunction with a HA0076 and allows the attaching of a second JetStation perpendicular to a ShoreStation stationary dock system. Bumpers shown are optional only. Assembly Instructions 1. Locate the two-plate connectors and four- ½ x 5 9/16 x 3 square U-bolts shown in Diagram B. Place two U-bolts around the 5x2 aluminum tube. Align and insert the U-bolt legs into the holes in one of the plate connectors. Secure with ½ lock washers and hex nuts. Repeat on the other plate connector. Diagram B 57 ⅜ Centers 2. Position the plate connectors on 57 ⅜ centers as shown in Diagram A. Tighten the nuts by hand only because they may have to be repositioned to fit the JetStation. 3. Locate the four 3/8 x 3 7/8 x 4 5/8 round U-bolts. Insert them into the mating holes provided in the plate connectors as shown in Diagram B. Place on 3/8 lock washers and hex nuts to hold them in place. Perpendicular Mount Diagram A Diagram C Page 12 Rev C 03/19/2009

7 JetStation Mounting Brackets The JetStation Mooring Guide Brackets and plastic guides can be installed while the JetStation is on shore. NOTE: Placing the mooring guide brackets on the bottom side of the Jet- Station will allow it to be used where the dock deck is above the water level a minimum of 18 and a maximum of 38. Place the mooring brackets on the top side of the JetStation when the deck is more than 38 above the water. Diagram B Page 13 Rev C 03/19/2009

8 HA0078 JS2 Bumper Pole Kit The HA0078 JS2 Bumper Pole Kit is designed to stop the forward motion of the PWC as it is being loaded on the JetStation. It will prevent the PWC from coming forward to far and hitting the dock during the loading operation. It is to be mounted on the centerline of the JetStation. It bumper pole can be used to secure the PWC on the JetStation when not in use. The bumper pole also serves as a means to maintain your balance while boarding and disembarking the PWC. It is meant to be used as an individual unit for each JetStation that is mounted perpendicular to a stationary dock. It attaches to the 5x2 aluminum tube of the HA0076 ShoreStation Dock Mooring Hardware. Installation Instructions 1. Locate the bumper. Remove the hardware bag and sort all items by size. 2. Place the U-bolts around the 5x2 aluminum tube close to the centerline of the JetStation. Align the U-bolt legs with the holes in the bumper mounting plate. 3. Insert the legs into the mounting plate and secure with lock washers and hex nuts. 4. Center the bumper on the JetStation and tighten in position. 5. Assembly is complete. Page 16 Rev C 03/19/2009

9 Page 17 Rev C 03/19/2009

10 Installation Instructions Universal Dock Step 1.1 Alt 1.2 Alt Procedure Fit the Bow Roller [2] into the 2 Roller Mount Blocks [3] and slide in place on JS2 Assy. This requires no bolts. Holding the Bottom Plug [5] into the HP2 Assy as shown, run the SS Connecting Bolt [6] and SS Flat Washer through the Top Plug [4] and Mooring Link-Universal [9] and thread into Bottom Plug. Tighten bolt until top and bottom plugs are in contact with main body. Install 1/2 S.S. Lock Nut [13] and S.S. Flat Washer to end of bolt to further secure bottom plug. [5] NOTE: DO NOT USE AN IMPACT WRENCH FOR FINAL TIGHTENING. FEEL THE BOTTOM PLUG AND VERIFY IT IS IN CONTACT WITH THE JS2 BODY. OVERTIGHTENING CAN CAUSE INSERT TO PULL OUT OF BOTTOM PLUG. (TIGHTEN TO FT/LBS) JS2 Page 18 Rev C 03/19/2009

11 Installation Instructions Connecting Units Step Procedure 3.3 Tighten the plugs on the side that is left unattached to the point that the bottom of the plugs are flush with the bottom of the Connecting Links. This ensures that the plugs will not rotate and, therefore, will be properly aligned with the feature on the JS2 body. A spacer that is 2 1/2 tall will help ensure that the plugs stay in position. A 4 PVC Pipe cut 2 1/2 long and then cut in half lengthwise is found to be the best spacer. 3.4 When Plugs are in position slide the two units together (try to keep approximately the same weight on both units for best alignment). When units are pushed together the top plug is pulled up to lock the bottom plug in position. The Top Plug can then be tightened (It is important to keep pulling the top plug up while tightening to keep the bottom plug engaged). 3.5 Now that units are connected the Plugs may be assembled at the front location to finish the attachment (Refer to Connecting Units Chart to find out where mooring links attach). 2 1/2 Spacer Page 19 Rev C 03/19/2009

12 Installation Instructions Universal Dock Fixed or Floating Docks (HA0074) Step 2.1 Alt 2.2 Alt Procedure Attach the Universal Dock Bracket [13] to the dock as shown (3 different kits are illustrated). NOTE: IT IS UP TO THE INSTALLER TO DETERMINE IF THE ATTACHMENT IS STRONG ENOUGH. ADDITIONAL REINFORCEMENT MAY BE NECESSARY IN ROUGH WATER. Insert the 4 SCH 80 PVC Pipe [15] through the Universal Dock Bracket [13] and the Mooring Link-Universal [9]. Bolt together as shown and tighten until the PVC Pipe is firmly in place. Item # Description Part # Qty. 1 JS2 Assy 1 2 Bow roller with axle 1 3 Roller axle block 2 4 Top Plug 2 5 Bottom Plug 2 6 Connector stainless bolt 2 7 Strap Hook 1 9 Mooring Link - Fixed Dock 2 10 Heavy Duty Dock Brkt (OPTIONAL) 2 13 Universal Dock Brkt Fixed/Floating 2 14 Reinforcing Back Plate " Sch 80 PVC Pipe 48" 2 16 Riser Plate (OPTIONAL) 2 17 Lagging Plate 2 HA0074 1/2" X 1 1/2" BOLT 1/2" NUT 1/2" LOCK WASHER 13 1/2" LOCK WASHER 1/2" NUT 3/8" NUT 14 LAG BOLT 3/8" X 1 1/2" BOLT 17 3/8" LOCK WASHER 13 1/2" X 1 1/2" BOLT (OPTIONAL) 10 1/2" FLAT WASHER 1/2" LOCK WASHER MUST ANCHOR TOP OF BRACKET 16 (OPTIONAL) 1/2" X 1 1/2" BOLT 1/2" NUT 13 Page 21 Rev C 03/19/2009

HA0079 HA0074 Operating Instructions Loading ( WARNING: Only load PWC when JS2 is unoccupied.) 1. Approach JS2 at idle speed only. 2. Position bow of PWC up against Keel Guide. 3.

To secure the PWC, dismount from the watercraft and connect the strap hook through the front mooring eyelet of PWC. Launching 1. Release strap hook from front mooring eyelet of PWC. 2.

13 HA0079 HA0074 Operating Instructions Loading ( WARNING: Only load PWC when JS2 is unoccupied.) 1. Approach JS2 at idle speed only. 2. Position bow of PWC up against Keel Guide. 3. Apply necessary throttle to drive upon the platform until the bow of PWC rests on the bow bumper of JS2. 4. To secure the PWC, dismount from the watercraft and connect the strap hook through the front mooring eyelet of PWC. Launching 1. Release strap hook from front mooring eyelet of PWC. 2. Board PWC and shift weight towards rear of watercraft. 3. Apply a rocking motion to initiate the launch. 4. If PWC will not launch after rocking motion is applied, exit the PWC and move to the front of the JS2. Grasp the front of the PWC while lifting up and pushing back at the same time. After the launch is initiated, board the PWC and apply rocking motion. Page 22 Rev C 03/19/2009

14 Assembly Instructions Notes: Steps are already done on purchased unit. Step Procedure 1.1 Insert the Bow Bumper [3] into the Main Body [1] by inserting the barbed feature on the bottom side of the Bow Bumper [3] into the hole on the Main Body [1] and pushing down until it is firmly seated. 1.2 Slide the In Line Axle [4] through the In Line Wheel [5] with an Axle Spacer [6] placed on each side of the wheel. 1.3 Screw down the In Line Axle [4] assembly into the Main Body [1] placing 1 Axle Shim [8] at each screw location, then securing with #14 Screw w/hi-lo threads [7]. DO NOT OVERTIGHTEN Page 25 Rev C 03/19/2009

15 KIT BOX - JS2 - COMMON BOX ( ) Page 26 Rev C 03/19/2009

16 KIT BAG - JS2 - UNIVERSAL DOCK (HA0074) Page 27 Rev C 03/19/2009

17 Parts List Parts Box - Common JS2 ( ) Part # Qty. Bow roller with axle 1 Roller axle block 2 Connector plug top 2 Connector plug bottom 2 Washer - 1/2" - FW - SS 4 Connector stainless bolt 2 Strap Hook 1 HP2- Axle Shim 32 1/2" S. S. Nylock Nut 2 Installation Manual Shim Placement Illustration Moor'g Hdwe Box - JS2 Univers Dock (HA0074) Part # Qty. Connecting link - Fixed Dock 2 Bolt - Hex Head - 1/2" x 3 1/2" 4 Bolt - Hex Head - 1/2" x 1 1/2" 4 Nut - Hex - 1/2"-13 Galv 8 Washer - FW -1/2" Galv 4 Washer - LW - 1/2" Galv 8 Reinforcing Back Plate 2 Parts List Mooring Pipe Dock Bracket - Fixed JS2 PWC JetStation Part # Qty. JS2 - Main Body 1 JS2 - Bow Bumper 1 JS2 - In-line Axle 8 JS2 - In-line Wheel 8 JS2 - Axle Spacer 8 Screw - #14 Hi-Lo 1-1/4" 16 JS2 Universal Connection Hwde (HA0079) Part # Qty. Washer - 1/2" - FW - SS 2 Connector stainless bolt 2 Connector plug top 2 Connector plug bottom 2 Connecting Link 3 Parts List Page 28 Rev C 03/19/2009

INSTALLATION MANUAL. HydroPort 2 XL. 915 W. Blue Starr Dr. Claremore, OK Rev. - 12/16/13

INSTALLATION MANUAL. HydroPort 2 XL. 915 W. Blue Starr Dr. Claremore, OK Rev. - 12/16/13 INSTALLATION MANUAL HydroPort 2 XL 915 W. Blue Starr Dr. Claremore, OK 74017 1-800-825-3379 Rev. - 12/16/13 HydroHoist Marine Group Product and Use Warning Disclaimer ASSEMBLY, INSTALLATION OR REPAIRS