Greeensboro, NC. RF Micro Fab 4 EQ Electrical Schedule. Note: Lamps. (per fixture)

Transcription

1 RF Micro Fab 4 EQ-7785 Greeensboro, NC Electrical Schedule Variable Frequency Drive Manufacturer Part Number Quantity Location Construction N/ N/ N/ N/ N/ N/ Fluorescent Lighting Manufacturer Part Number Quantity Voltage / Phase / Hertz Lamps (per fixture) Compact Crouse-Hinds TP-7801 See Drawings 120/1/60 (1) 40W CF40ELTWIST GFCI Receptacle Manufacturer Part Number Quantity Enclosure Cover 120V 20 Spec. Grade Cooper XGF20V See Drawings Killark FS-2 Killark FCL-GF Light Switch Manufacturer Part Number Quantity Enclosure Cover 120V 20 Spec. Grade Cooper 2221V See Drawings Killark FSLB-2 Killark FZ8648 Note: 1) ll wiring in Rigid luminum Conduit, 3/4" minimum size. 2) Flexible Liquid-Tite Conduit used to isolate motor connection, last 24-36". 3) ll wire is stranded copper THHN / THWN / MTW, minimum 12 gauge. Environmental ir Systems Inc. 623 McWay Drive, High Point, NC Phone: (336) Fax: (336)

2 VPOR PROOF LIGHTING VPOR PROOF FIXTURES GSKETED CORROSION RESISTNT DIE-CST CONSTRUCTION, GLSS GLOBES, DIE-CST GURDS, UL LISTED TP7600, TP7601, TP7800, TP7801, TP7860 TP7610, TP7611, TP7805 TP7620, TP7810, TP7621, TP7811 TP7630, TP7815 TP7640, TP7820 TP7650, TP7825 W E T H E R P R O O F TRDE NET PRICE PER 100 Product Std. Unit Wt. Lbs. Less Than Unit Number Description Watts Carton Per 100 Unit Quantity 4" BOX MOUNTED, 1/ HOLES TP7600 Clear Globe, Cast Guard TP7601 Clear Globe, Cast Guard 3/4 holes TP7800 Clear Globe, Cast Guard TP7801 Clear Globe, Cast Guard 3/4 holes TP7860 Fluorescent Clear Globe, Cast Guard TP7610 Clear Globe TP7611 Clear Globe 3/4 holes TP7805 Clear Globe PENDNT MOUNT, 1/ THRED TP7620 Clear Globe, Cast Guard TP7621 Clear Globe, Cast Guard 3/4 holes TP7810 Clear Globe, Cast Guard TP7811 Clear Globe, Cast Guard 3/4 holes TP7630 Clear Globe TP7815 Clear Globe SURFCE MOUNT, FITS 3" and 4" ROUND BOXES TP7640 Clear Globe, Cast Guard TP7820 Clear Globe, Cast Guard TP7650 Clear Globe TP7825 Clear Globe DIMENSIONL DT, PGES TP-T100 EFFECTIVE JNURY 1, 2000

3 VPOR PROOF LIGHTING VPOR PROOF DIMENSIONS 200 WTT Product Overall Number Length Width Depth TP / 5 1/ 6 3/8" TP / 5 1/ 8" TP / 4 1/ TP / 5 1/ TP /4" 5 1/ 100 WTT DIMENSIONS 7" Vapor Proof Lighting Our Glass Globe Vapor proof fixtures comply with the latest U.L. requirements for standard 1571, for enclosed and gasketed incandescent fixtures. Suitable For Wet Locations Corrosion resistant, rugged die-cast construction castings. These lights are designed for indoor and outdoor industrial or commercial locations, gasketing allows their use in outdoor locations. Designed by our engineers for fast, easy on the job site installation. Thepitt Vapor proof series fixtures are perfect for permanent or temporary lighting. Screw on cast guards are supplied with allen head set screws locking it in place to help prevent vandalism. Unit features snap-in, snap-out, copper screw shell porcelain sockets with screws backed out. Fixtures may be purchased complete or as components. Fixtures constructed of Die-Cast luminum, Guards are Zinc Die-Cast. Heat-Resistant Clear Globe vailable on 100 watt series. Wire Guard vailable Clear glass is standard, colors are available, plastic (polycarbonate) globes which are virtually unbreakable are available in colors and are used as an alternative to glass globe-guard combinations (not recommended to exceed 60 watts). W E T H E R P R O O F TP-T100 EFFECTIVE JNURY 1,

4

5

6

7

8 Commercial Specification Grade Ground Fault Circuit Interrupters 2 Pole, 3 Wire Grounding 20 Feed-Through Rating V V Commercial Specification Grade GFCI FETURES Meets or exceeds all latest UL943 (3rd edition) Class GFCI, UL498 requirements. Reset button lock-out function protects from miswired line-load connections and GFCI circuitry damage due to disabling voltage surge spikes. Indicator light provides quick visual reference of a tripped condition. Ground screw backwiring clamp for fast, secure termination. 20 amp feed-through rating allows full protection of downstream receptacles when wired from load side. 8 separate backwiring holes accept up to #10 WG stranded wire, for maximum flexibility. Durable, impact-resistant thermoplastic construction. Line terminal screws are backed out, staked, ready to wire; load side terminals torqued down for increased prevention of miswiring. Device and wallplate mounting screws are captive, speeding installation time. Low overall dimensions makes for more room to wire in crowded box situations. Longest possible mounting strap helps assure secure, easy mounting. Color-matched and recessed Test & Reset buttons provide uniform appearance. Matching thermoplastic wallplate included. Back and Side Wire with Unbreakable Wallplate Rating Catalog No. V/C NEM Description Color W/Std Plate W/Midi Plate R GFCI Receptacle lmond XGF15 XGF15-M Black XGF15BK Brown XGF15B Gray XGF15GY Ivory XGF15V XGF15V-M Light lmond XGF15L XGF15L-M White XGF15W XGF15W-M R GFCI Receptacle lmond XGF20 Black XGF20BK Brown XGF20B Gray XGF20GY Ivory XGF20V Light lmond XGF20L White XGF20W XGF15 INDUSTRIL COMMERCIL RESIDENTIL J-2 GFCI G G W W 5-15R 5-20R TESTING & CODE COMPLINCE culus Listed (file no. E60120). Meets all UL943 (GFCI) and UL498 (Receptacles) requirements. Meets al UL498 Hospital Grade requirements. NOM Certified MTERIL CHRCTERISTICS Meets flammability requirements per UL94, V2 rated. Temperature Rating: -35 C to 66 C.

9 Industrial Specification Grade Switches 15, 20, /277V/C Grounding /277/347V/C INDUSTRIL COMMERCIL RESIDENTIL D-1 SWITCHES TESTING & CODE COMPLINCE UL 20 Listed (file no ), meets Federal Spec. WS-896. CS (file no ( )). Meets all CS requirements, C22.2 no. 111, except as noted. NOM Certified, except as noted. MTERILS CHRCTERISTICS Temperature Rating: -40 C to 65 C. 3.28" (83.3mm) 2.38" (60.45mm) 3.28" (83.3mm) 2.38" (60.45mm) 3.28" (83.3mm) 2.38" (60.45mm) 3.28" (83.3mm) 2.38" (60.45mm) 1.31" (33.27mm) " (33.27mm) " (33.27mm) " (33.27mm) " (60.96mm) 1.05" (26.67mm) 2.40" (60.96mm) 1.05" (26.67mm) 2.40" (60.96mm) 1.05" (26.67mm) 2.40" (60.96mm) 1.05" (26.67mm) C Quiet Switches FETURES Industrial design cam action mechanism insures quiet switch action. Color-coded faces identify amperage: blue=15 amp, red=20 amp, green=30 amp. utomatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Tapered lead-in slots on back wiring holes assist in gathering stranded wires for faster, more secure connections. Back and side wire terminals accept up to #10 solid or stranded wire. Ground screw terminal standard " (1.27mm) thick steel mounting strap zinc-plated for corrosion resistance. 120/277V/C rating ideal for fluorescent lighting fixtures typical in commercial applications. Combination slot/robertson head mounting and terminal screws ease installation. Back and Side Wire Rating Catalog No. V/C Color Single-Pole Double-Pole 3-Way 4-Way /277 Brown 1201B 1202B 1203B 1204B Gray 1201GY 1202GY 1203GY 1204GY Ivory 1201V 1202V 1203V 1204V Red 1201RD 1203RD White 1201W 1202W 1203W 1204W /277 Brown 2221B 2222B 2223B 2224B Gray 2221GY 2222GY 2223GY 2224GY Ivory 2221V 2222V 2223V 2224V Red 2221RD 2222RD 2223RD 2224RD White 2221W 2222W 2223W 2224W /277 Brown 3031B 3032B 3033B* 3034B* Ivory 3031V 3032V 3033V* 3034V* Red 3031RD 3032RD 3033RD* 3034RD* White 3031W 3032W 3033W* 3034W* * Not CS approved or NOM certified Notes: C switches are not recommended for use on Master or Emergency Power Systems. C switches can be used on HP applications as permitted by NEC paragraphs and Horsepower Rated for Motor Loads per UL V/C 240V/C Max mps 15 1/2 HP 2 HP HP 2 HP HP 2HP 24

10 R F30 FS/FD/FSC SERIES FITTINGS CST DEVICE BOXES STNDRD ND HOSTILE LOCTIONS UL Standard: 514 CS Standard: C22.2 No. 18 Fed Spec: W-C-586D NEM: FB-1 Listed File No. E 3397 FS Type FD Type FSC Type Certified File No. LR11852 FETURES-SPECIFICTIONS pplications ccommodates wiring devices and provides opening to splice, tap, or pull conductors Provide access to conductors for maintenance and future system changes Features Tapered threads (NPT with integral bushings) Internal grounding screw Optional mounting feet available on FS, FD, FSC, and FDC vailable single and two gang styles Suitable for use in wet locations when used with gasket covers Cast iron is suitable for concrete use For use with FS-style covers see pages F40-F42 Material/Finish Copper-free luminum (less than 4/10 of 1%) Electrostatically applied powder coating Duraloy Iron Tri-coat finish of electrozinc, chromate sealant, and electrostatically applied powder coating FS TYPE CST DEVICE BOX SHLLOW DED END CTLOG NUMBER DIMENSIONS HUB KILLRK DURLOY SIZE LUM. IRON B C D E F G FS-1 FS-2 FS-3 FD-1 FD-2 FD-3 FS-1M FS-2M FS-3M FD-1M FD-2M FD-3M 1/ 3/4" 1" 1/ 3/4" 1" FD TYPE CST DEVICE BOX DEEP DED END CTLOG NUMBER HUB DIMENSIONS KILLRK DURLOY LUM. IRON SIZE B C D E F G FSC TYPE CST DEVICE BOX SHLLOW FEED THRU CTLOG NUMBER HUB DIMENSIONS KILLRK DURLOY LUM. IRON SIZE B C D E F G FSC-1 FSC-2 FSC-3 FSC-1M FSC-2M FSC-3M 1/ 3/4" 1" VOLUME CU. IN. VOLUME CU. IN VOLUME CU. IN. Dimensions 2 1 / (64) D 2 7 / 8" E 2 1 / (64) D 2 7 / 8" E 2 1 / (64) D 2 7 /8" E B 5 / 3 (4) FS C B 5 / 3 (4) FD C B 5 /3 (4) FSC C

11 R FSX/FS/FD/FSLB SERIES FITTINGS CST DEVICE BOXES STNDRD ND HOSTILE LOCTIONS F33 UL Standard: 514 CS Standard: C22.2 No. 18 Fed Spec: W-C-586D NEM: FB-1 Listed File No. E 3397 FSX Type FS/FD Types FSLB Type Certified File No. LR11852 FETURES-SPECIFICTIONS pplications ccommodates wiring devices and provides opening to splice, tap, or pull conductors Provide access to conductors for maintenance and future system changes Features Tapered threads (NPT with integral bushings) Internal grounding screw Optional mounting feet available on FS, FD, FSC, and FDC vailable single and two gang styles Suitable for use in wet locations when used with gasket covers Cast iron is suitable for concrete use For use with FS-style covers see pages F40-F42 Material/Finish Copper-free luminum (less than 4/10 of 1%) Electrostatically applied powder coating Duraloy Iron Tri-coat finish of electrozinc, chromate sealant, and electrostatically applied powder coating FSX TYPE CST DEVICE BOX SHLLOW CTLOG NUMBER KILLRK LUM. FSX-1 FSX-2 DURLOY IRON FSX-1M FSX-2M HUB SIZE 1/ 3/4" DIMENSIONS B C D E F G FS TYPE CST DEVICE BOX SHLLOW DED END CTLOG NUMBER KILLRK LUMINUM HUB SIZE B C DIMENSIONS D E F G FS-1 FS-2 1/ 3/4" FD TYPE CST DEVICE BOX DEEP DED END CTLOG NUMBER KILLRK LUMINUM FD-2 HUB SIZE 3/4" DIMENSIONS B C D E F G FSLB TYPE CST DEVICE BOX SHLLOW FEED THRU CTLOG NUMBER KILLRK LUMINUM HUB SIZE B C DIMENSIONS D E F G FSLB-1 FSLB-2 1/ 3/4" VOLUME CU. IN. VOLUME CU. IN. VOLUME CU. IN VOLUME CU. IN. F Dimensions D E 2 1 / (64) 2 7 /8" C 5 /3 (4) B FSX FS FD FSLB

12 R FZ/FCL-GF/FST SERIES FITTINGS DEVICE BOX COVERS STNDRD ND HOSTILE LOCTIONS F41 Listed File No. E 3397 FZ8647 FCL-GF Type FST Type Certified File No. LR11852 FETURES-SPECIFICTIONS Cast metallic covers with electrostatically applied powder coating CST DEVICE COVERS SINGLE GNG (GSKETS INCLUDED) CTLOG NUMBER DESCRIPTION CST DEVICE COVERS SINGLE GNG (GSKETS INCLUDED) CTLOG DESCRIPTION NUMBER CST DEVICE COVERSTWO ND THREE GNG (GSKETS INCLUDED) CTLOG DESCRIPTION NUMBER F FSBC FSBCM Blank for Single Gang Boxes Iron Blank for Single Gang Boxes FCL Duplex Receptacle 2FSBC 2FSBCM Blank for 2 Gang Boxes Iron Blank for 2 Gang Boxes Square Toggle FZ8648 Lock in ON or OFF Position FCLT Toggle Switch 2FST 2 Toggle Switches Square Toggle FZ8647 (Long Throw Such as Manual Starters) FCLR Round Receptacle 1.406" Dia. 3FST 3 Toggle Switches Round FST FSPT 1 Toggle Switch For Toggle Switch FCLG FCLM Receptacle 1.625" Dia. Round Receptacle 1.750" Dia. 3FSBC Blank for 3 Gang Boxes FCLN Round Receptacle 2.156" Dia. Device Cover for Most FCL-GF Manufacturers GFI Devices Includes Gaskets and Screws Replacement FCL-VG Vellumoid Gasket

13 R R F42 FCL/FZ/PL SERIES FITTINGS DEVICE BOX CCESSORIES STNDRD ND HOSTILE LOCTIONS FCL-GF FZ-8647 PL FETURES-SPECIFICTIONS FCL Device Covers (For GFI Receptacles) pplications Use in dirty, dusty or corrosive areas lndoor/outdoor applications Where devices need physical protection Features May be used with several different manufacturers GFI devices Mounts on all FS, FD, FSQ and FDQ Series boxes (single opening) Snap type lid. UL/CS suitable for wet locations. Gaskets included FZ pplications In wet and damp locations reas where dust or dirt are a problem With standard toggle switches or manual motor starters Features Copper-free aluminum Gaskets included Three toggle operator choices Lock ON or OFF provision standard Stainless steel screws Mounts on all FS, FD, FSQ and FDQ Series boxes (single opening) PL pplications Wet and damp locations reas where dirt, dust or corrosion is a problem Washdown areas such as food processing plants or dairies Features Non corrosive yellow polyethylene ring Molded neoprene boot on plug CTLOG NUMBER PL-7 Not CS approved. NEM CONFIGURTION ND RTING Cord diameter.375(9)/.625(16) CTLOG NUMBER FCL-GF FCL-VG ITEM Device cover includes gaskets and screws Replacement Rubber gasket CTLOG NUMBER FZ8648 FZ8647 FZ TYPE OF TOGGLE SWITCH HNDLE Square toggle Square toggle (Long throw-such as manual starters) Round toggle Listed - File E3397 Listed - File E3397 Certified - File LR11852 Certified - File LR11852

14 RIGID LUMINUM CONDUIT SPECIFICTION DT Photo 2 LLOY: llied Rigid luminum Conduit is manufactured of 6063 alloy in temper designation T-1. The fittings are of the same alloy. STNDRDS: llied Rigid luminum Conduit is listed by Underwriters Laboratories to U.L. 6, Standard for Rigid Metal Conduit and is manufactured to NSI C80.5. (Federal specification). THRED PROTECTORS: Color-coded end caps keep threads clean and sharp and help provide trade size recognition. Even sizes are blue; 1 /2 trade sizes are black; and 1 /4 trade sizes are red. RECOMMENDED INSTLLTION PRCTICES CUTTING: hacksaw is recommended to cut trade sizes 1 1 /4 and smaller. Larger trade sizes can be cut with power cut-off equipment. BENDING: Standard EMT benders, one size larger than the size of the conduit, should be used on conduit trade sizes 1 and smaller. For sizes over trade size 1, conventional equipment is recommended. THREDING: Sharp dies and conventional cutting oil should be used for aluminum conduit. general purpose emulsifiable oil can provide excellent results. FITTINGS: luminum fittings are recommended; however, cadmium plated or galvanized fittings are satisfactory for most installations. FISHING ND WIRE PULLING: Small conduit: In trade sizes up to 1 1 /2 and on shorter runs (up to 100 feet), polyethylene fish tapes can be used effectively. lso recommended are round, flexible, speedometer-type steel cables. Use of flat steel tapes should be avoided since they tend to jam in the bends, or if not used carefully, scrape and cut conduit walls. Large Conduit: For pulling large conductors through larger conduit or longer runs, polypropylene rope is recommended. Steel pulling cables, especially when old or frayed, can damage steel or aluminum conduit. IN SOIL OR CONCRETE: Underwriters Laboratories Electrical Construction Equipment Directory (UL Green Book) states that aluminum conduit used in concrete or in contact with soil requires supplementary corrosion protection. Examples are paints approved for the purpose (bitumastic paint, for example), tape wraps approved for the purpose, or PVC coated conduit. 2

15 RIGID LUMINUM CONDUIT Weights and Dimensions for Rigid luminum Conduit pproximate Nominal Nominal Quantity Master Bundles Trade Size Weight per Outside Wall In Primary pproximate Designator 100 Ft. (30.5M) Diameter Thickness Bundle Quantity Weight 1 U.S. Metric lb. kg. in. mm in. mm ft m ft m lb. kg 1 / / / / / / Includes one coupling on each end. Notes: Dimensions and weights are nominal unless otherwise noted. Each length of conduit with coupling attached will be nominally 10 feet. Couplings pproximate Nominal Trade Size Weight per Outside Standard Designator 100 Ft. (30.5M) Diameter Length Package U.S. Metric lb. kg. in. mm in. mm Pieces 1 / / / / / / Elbows Couplings pproximate Nominal Trade Size Weight per Dimensions Designator 100 Ft. (30.5M) B C U.S. Metric lb. kg. in. mm in. mm in mm 1 / / / / / / L O.D. Elbows C B C B 3

16 FORM 7 SNPPCK FORM 7 SNPPCK PRE-SSEMBLED BODY, GSKET ND COVER Ideal for contractors, the Cooper Crouse-Hinds Form 7 SnapPack combines a standard iron body, a neoprene gasket and a sheet-steel wedge nut cover in a single, bar-coded assembly. Many popular body sizes and styles are available. SNPPCK MENS Fewer transaction costs Easier inventory control Fast and simple merchandising

17 FORM 7 SNPPCK PPLICTIONS: Form 7 Condulets are installed in conduit systems to: act as pull outlets for conductors being installed. provide an opening for making splices and taps in conductors. connect conduit sections. provide taps for branch conduit runs. make 90-degree bends in conduit runs. provide access to conductors in a conduit system for maintenance and future system changes. FETURES: ll SnapPack product is individually bar coded to facilitate more efficient inventory control. Distributors and end users need to stock a single SKU instead of three separate component numbers order the body, cover and gasket with one catalog number saving transaction costs, and making product selection and merchandising fast and easy. Form 7 conduit bodies are compact with a round back design for neat, efficient installations. Conduit hubs have tapered threads and integral bushings for protection of wire insulation. Many shapes and trade sizes available. Standard neoprene gasket makes these fittings raintight. Sheet-steel wedge nut cover is provided. The wedge nut design facilitates installation and removal. Nuts and screws are held captive in cover. Cover screws are stainless steel with a combination slotted and Phillips head, for easy installation and superior corrosion protection. STNDRD MTERILS: Body Feraloy iron alloy Gasket Neoprene Cover sheet steel Cover screws stainless steel STNDRD FINISHES: Feraloy electrogalvanized with aluminum acrylic paint Sheet steel electrogalvanized CERTIFICTIONS ND COMPLINCES: UL Standard 514B CS Standard C22.2 No. 18 ORDERING INFORMTION: TRDE CTLOG SIZE SHPE NUMBER 1/ C C17-CG 3/4" C C27-CG 1" C C37-CG 1 1/4" C C47-CG 1 1/ C C57-CG C C67-CG 1/ LB LB17-CG 3/4" LB LB27-CG 1" LB LB37-CG 1 1/4" LB LB47-CG 1 1/ LB LB57-CG LB LB67-CG 1/ LL LL17-CG 3/4" LL LL27-CG 1" LL LL37-CG 1 1/4" LL LL47-CG 1 1/ LL LL57-CG LL LL67-CG 1/ LR LR17-CG 3/4" LR LR27-CG 1" LR LR37-CG 1 1/4" LR LR47-CG 1 1/ LR LR57-CG LR LR67-CG 1/ T T17-CG 3/4" T T27-CG 1" T T37-CG 1 1/4" T T47-CG 1 1/ T T57-CG T T67-CG 1/ TB TB17-CG 3/4" TB TB27-CG 1" TB TB37-CG 1 1/4" TB TB47-CG 1 1/ TB TB57-CG TB TB67-CG 1/ X X17-CG 3/4" X X27-CG 1" X X37-CG 1 1/4" X X47-CG 1 1/ X X57-CG X X67-CG Note: Form 7 Condulets and covers are available in additional configurations, sizes and materials. For a complete listing of Form 7, Form 8 and Mark 9 conduit bodies and covers see the Cooper Crouse-Hinds Product Catalog 5500, section 1F. For more information: If further assistance is required, please contact an authorized Cooper Crouse-Hinds Distributor, Sales Office or Customer Service Department: In the U.S.: In Canada: Cooper Crouse-Hinds Cooper Crouse-Hinds Canada P.O. Box 4999 (905) Syracuse, NY FX: (905) (315) FX: (315) crouse.customerctr@crouse-hinds.com For the latest in new products and services, visit our website at: Solutions.Worldwide. TM Crouse-Hinds is a registered trademark of Cooper Industries, Inc Cooper Industries, Inc. Printed in U.S..

18 LIQUIK LIQUIDTIGHT FITTINGS No disassembly required! The Cooper Crouse-Hinds LiQuik liquidtight fittings are quick and easy to install in just 2 steps, offering huge labor saving potential. vailable in trade sizes 3/8" straight insulated or non-insulated. Traditional ssembly Installation 1. Slide nut over conduit. 4. Slide the conduit assembly inside body. New LiQuik ssembly Installation In Just 2 Steps: 1. Slide conduit inside the fully assembled connector. 2. Slide compression ring over conduit. 5. Slide compression nut and ring toward the connector. 3. Thread ferrule inside the conduit. 6. Tighten the nut. 2. Turn the connector assembly or the conduit until the ferrule threads engage the spirals in the conduit. The pins in the ferrule are locked inside the holes in the connector body, preventing the ferrule from turning. Tighten the nut against the connector. Ordering Information Done! Li-Quik Liquidtight Fittings straight, non-insulated C B D Trade Dim Dim Dim Dim Catalog Number Size (in.) B (in.) C (in.) D (in.) LTQ38 3/8" 1/2 1 1/8 1/2 1 1/8 LTQ50 1/ 1/2 1 1/4 1/2 1 1/4 LTQ75 3/4" 3/4 1 1/4 1/2 1 9/16 LTQ100 1" 1 1 7/16 5/8 1 13/16 LTQ /4" 1 1/4 1 1/2 11/16 2 1/4 LTQ / 1 1/2 1 5/8 3/4 2 7/16 LTQ /4 3/4 3 Li-Quik Liquidtight Fittings straight, insulated Trade Dim Dim Dim Dim Catalog Number Size (in.) B (in.) C (in.) D (in.) LTQB38 3/8" 1/2 1 1/8 9/16 1 1/8 LTQB50 1/ 1/2 1 1/4 9/16 1 1/4 LTQB75 3/4" 3/4 1 1/4 9/16 1 9/16 LTQB100 1" 1 1 7/16 11/ /16 LTQB /4" 1 1/4 1 1/2 3/4 2 1/4 LTQB / 1 1/2 1 5/8 13/16 2 7/16 LTQB /4 13/16 3 C B D 5

19 Type U-CS.. Flexible, Heavy Duty, Liquid-Tight, Zinc Coated Steel Core, PVC Covered Conduit, UL & CS pproved Square Locked Design with copper ground wire in 3/8 to 1-1/4. Interlocked Design 1-1/2 and up. UPC Trade Standard Length Min. Inside Bend Size Meters / Feet Diameter (inches) /8 30 / /8 244 / /2 30 / /2 305 / /4 30 / /4 152 / / / /4 15 / /4 76 / /2 15 / /2 45 / / / Consult factory for information on larger sizes Standard colour - grey. Sealtite Type U-CS additional information Constructed of continuous square locked zinc coated steel strip inner core with copper ground wire in sizes from 3/8 to 1-1/4. Constructed continuous interlocked zinc coated steel strip inner core on sizes over 1-1/4. Uses standard readily available liquid-tight connectors. Smooth PVC cover, sunlight resistant, oil resistant (consult factory for oil resistant product). Rated from -20 o C to + 60 o C. UL and CS approved. Suitable for Class 1, Div II; Class 2, Div. I & II; Class 3, Div. I & II. Suitable for direct burial up to 2. 6 NMET CND INC. Return to main index

20 Type 12 JIC Screw Cover Enclosures Data Sheet Low Voltage Section Splits Construction Enclosure and cover are fabricated from (16) gauge steel ll continuous welded seams are finished smooth Cover is attached with captive screws which thread into sealed well nuts Cover has a fixed, oil-resistant gasket Ground stud provided on cover #10-32 weldnuts are provided for mounting optional panel External mounting feet are provided for secure wall mounting Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping noncorrosive liquids ccessories Panels JIC terminal strap kit JIC terminal strip kit Terminal blocks Touch-up paint See ccessories section Standards UL 508 listed, Type 13 and Type 12 CS C22.2 No.94 certified, Type 13 and Type 12 Conforms to NEM standard for Type 13 and Type 12 Conforms to JIC standard EGP IEC 60529, IP65 98 Notes: B-Line Systems can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

21 Type 12 JIC Screw Cover Enclosures Catalog Number Enclosure Enclosure Size Panel Panel Size Height x Width x Depth xbxc Height x Width Catalog Number in. mm Catalog Number in. mm SC 4.00x4.00x x102x SC 6.00x4.00x x102x76 W64P 4.87x x SC 8.00x6.00x x152x89 W86P 6.87x x SC 4.00x4.00x x102x SC 6.00x4.00x x102x102 W64P 4.87x x SC 6.00x6.00x x152x102 W66P 4.87x x SC 8.00x8.00x x203x102 W88P 6.87x x SC 10.00x8.00x x203x102 W108P 8.87x x SC 10.00x10.00x x254x102 W1010P 8.87x x SC 12.00x10.00x x254x127 W1210P 10.87x x SC 8.00x6.00x x152x152 W86P 6.87x x SC 10.00x8.00x x203x152 W108P 8.87x x SC 10.00x10.00x x254x152 W1010P 8.87x x SC 12.00x12.00x x305x152 W1212P 10.87x x SC 14.00x12.00x x305x152 W1412P 12.87x x SC 16.00x14.00x x356x152 W1614P 14.87x x327 B B (8) mounting hole (4PL) C +.75 (19) (44) (25) B-1.00 (25) C-.46 (12) optional panel weldnut (4PL) B-1.75 (44) mounting feet gasketed captive screw Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice. 99