Straight Blade Plugs and Connectors

Transcription

1 Straight Blade I Hospital rade I-1 I-4 Industrial Specification rade I-5 I-9 Industrial Specification rade Flanged Inlets and Outlets I-10 Insulated Straight Blade I-11 atertight Straight Blade I-12 atertight Boots I-13 Commercial Specification rade I-14 I-17 Standard rade I-18 I-23 Industrial Specification rade Power Plugs I-24 Commercial Specification rade Power Plugs I-25 Range and Dryer for Replacement Use Only I-26 Industrial Specification rade Straight Blade Power Plugs I-27 Commercial Specification rade Power Plugs and Receptacles I-28 Industrial Specification rade Power Plugs I-29 Commercial Specification rade Power Plugs I-30 No one manufactures more straight blade plugs and connectors than Cooper iring Devices. These devices are built strong to withstand rugged use while ensuring long-term reliability and easy installation. Our comprehensive offering includes Hospital, Industrial, Commercial and Standard rade products. Industrial rade products include standard black and white devices as well as complete lines of insulated and watertight plugs and connectors. e manufacture our devices from the highest quality thermoplastic materials, and with the option of either external or internal clamping. Commercial rade products provide functionality similar to our Industrial rade, but at a more economical cost; Standard rade devices emphasize simplicity and ease-of-use for do-it-yourself installation. Available in a broad range of NEMA and Canadian configurations, these high-quality devices meet the UL 498 standard and virtually any application imaginable.

2 Straight Blade Cooper iring Devices offers one of the largest selections of high-quality plugs and connectors available in the Americas. I-Intro-1 STRAIHT BLADE PLUS AND Our line includes a wide range of configurations for virtually every application. Many diverse locations can benefit from the safety and quality of these durable high performance devices. Cooper straight blade plugs and connectors meet demanding applications in factories, plants, hospitals, office buildings, garages, kitchens, and schools and universities. Our plugs and connectors are designed for safe and reliable service in the most demanding environments such as construction sites and convention centers and exhibition halls. Cooper iring Devices straight blade plugs and connectors meet or exceed industry standards as required by the National Electrical Manufacturers Association, Underwriters Laboratories, eneral Services Administration, and Federal Specifications. et the most rigorous battery of tests is performed within our own facilities. All of Cooper iring Devices straight blade plugs and connectors are Underwriters Laboratories (UL) Listed (except where noted). Many are also CSA certified or available as CSA certified. Please consult Cooper iring Devices Customer Service for availability. Hospital rade Cooper iring Devices Hospital rade plugs and connectors have been designed for use on all AC branch circuits and equipment, in hospitals and health care facilities as required by NEC, Article 517. Their high impact-resistant thermoplastic construction stands up to the rugged demands of health care facilities. Additional features, such as a clear terminal cover to allow visual inspection of terminations, were designed using direct feedback from the end-users. Industrial Specification rade Plugs and Connectors Industrial Specification rade plugs and connectors are high-performance connecting devices for use in the high abuse areas of industrial plants, institutional applications and commercial job sites. Our product lines meet or exceed the latest requirements of industry performance standards and design standards such as NEMA, ANSI, UL, CSA, and Federal Specifications/SA. They are available in all the popular NEMA configurations in straight and angle designs as well as isolated ground models. Commercial Specification rade Plugs and Connectors Cooper iring Devices offers three unique designs of impact-resistant thermoplastic Specification rade plugs and connectors. 1. The Vinyl line has the conventional screw actuated clamp strain-relief with I-beam structure for superior strength. 2. Armored Vinyl plugs and connectors combine rugged thermoplastic bodies with plated steel armor for replacement of OEM plugs and connectors on heavy machinery. 3. Rubber plugs and connectors are designed to resist a wide variety of chemicals such as ammonia, toluene and gasoline. They maintain their flexibility and impact resistance in extremely low temperatures. Standard rade Cooper iring Devices Standard rade plugs and connectors are compact yet rugged devices for use in homes, offices, and commercial buildings. They come in a broad range of designs and configurations to fit many replacement applications.

3 Straight Blade The Toughest Industrial Specification rade Devices ou Can Find Have One Name Cooper. Autorip Series Autorip plugs and connectors feature an automatic, internal cord grip for fast assembly and a neoprene seal and nylon construction for long-term performance in abusive applications. Autorip TM Backwired for quick installation. Smooth, tapered body design eliminates snagging while providing a comfortable feel to the user. Neoprene gasket seals tight cord opening for added terminal protection against outside elements, including moisture, dirt, and metal chips. Tapered individual wire pockets guide stranded wire into contact area for ease of installation. Unique Autorip design clamps the cord during assembly, reducing installation time. Nylon Dead-Front construction. I-Intro-2 STRAIHT BLADE PLUS AND

4 Straight Blade Safety rip Combine Durability and Fast Installation Safety rip plugs and connectors feature an external cord grip, neoprene seal and nylon construction for reliable performance in the toughest conditions. Safety rip TM I-Intro-3 STRAIHT BLADE PLUS AND Nylon body designed for long life in high abuse industrial areas. Neoprene gasket seals around cord for added terminal protection against outside elements, including moisture, dirt, and metal chips. One-piece grounding contacts for superior continuity. Unique Safety rip with dual range cord grip provides positive cord gripping while limiting strain on conductors. Clear terminal cover allows for inspection of conductors and terminations. Quick-drive screws for fast assembly. Nylon Dead-Front construction resists chemicals. Tapered, individual wire pockets guide stranded wire into contact area for ease of installation.

5 Straight Blade Tests To ensure safety and reliability, Cooper iring Devices straight blade plugs and connectors are tested, rated and marked according to various standards. The information below indicates the required performance tests specified by industry standards for electrical wiring devices. Classification Standards Devices Tests Standard rade UL498 Connectors 10 Cycles with Standard Plug Blades NEMA D-1 Connectors 50 Cycles at 150% Rated Current Industrial Specification rade and Commercial Specification rade UL 498 NEMA D-1 and Fed. Spec. C 596 (SA) Connectors Connectors Plugs & Connectors Plugs & Connectors Plugs & Connectors Connectors Connectors Connectors Plugs & Connectors Plug Retention-Hold 3 lbs. on 2 Pole Bladed Plug Plug Release-Release 15 lbs. on 2 Pole 3 ire Plug 30 Maximum Temperature Rise at Full Rated Current Strain Relief Stray Strand Dielectric All the Requirements of Standard rade Plus: Total of 20 Cycles with Oversized Blades Contact Retention-1 1/2 lbs. on Single Undersized Power Blade, 4 oz. on Undersized rounding Blade Total of 250 Cycles at 200% Rated Current Dielectric x Rated Voltage I-Intro-4 STRAIHT BLADE PLUS AND Hospital rade UL 498 & 544 Connectors Connectors Connectors Plugs & Connectors Plugs & Connectors Plugs & Connectors Plugs & Connectors Plugs & Connectors Connectors All the Requirements of Industrial Specification rade Plus: round Contact Temperature round Contact Overstress Resistance Mold Stress Relief Crush Impact Resistance Mechanical Drop Strain Relief Tests Plug Connection and Separation

6 Hospital rade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V I-1 STRAIHT BLADE PLUS AND TESTIN & CODE (file no. E3663), UL verified to Federal Spec. C-596F, CSA Certified to C22.2 no. 42 (file no. LR7087), except as noted. 1.44" (36.6mm) 2.06" (52.3mm) 1.37" (34.8mm) 1.50" (38.1mm) 6266HC 1.28" (32.5mm) 1.46" (37.1mm) 6265HC 2.06" (52.3mm) 1.50" (52.3mm) Safety rip TM Nylon Marked Hospital rade and identified with green dot symbol. Nylon back-wired Dead-Front construction. Neoprene gasket seals cord hole on straight plugs and connectors. Safety rip Dual range cord grip clamps on straight plugs and connectors. Combination head screws: U.S. Phillips/slotted; Canadian Robertson/slotted. Add "-C" to catalog numbers for Canadian screws. Rating Cord Body Catalog No Straight " Black 6266H 6269H ( mm) & hite Straight " Clear 6266HC 6269HC ( mm) Angle " Clear 6265HC ( mm) Angle " Black 6665H ( mm) & hite Angle " Clear 6665HC ( mm) Straight " Black 6766H 6769H* ( mm) & hite Angle " Black 6765H ( mm) & hite Angle " Clear 6765HC ( mm) Angle " Black 6865H ( mm) & hite Angle " Clear 6865HC ( mm) * Not CSA certified Nylon; clear devices are Nylon and polycarbonate. -40 C to 75 C. 5-15P 5-15R 5-20P 5-20R 6-15P 6-15R 6-20P 6-20R

7 Hospital rade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 5-20, 20A 125V Autorip TM Nylon Neoprene gasket seals cord hole opening Automatic cord grip assembly clamps the flexible cord to reduce wiring time All thermoplastic construction reduces breakage. Combination head screws: U.S. Phillips/ slotted; Canadian Robertson/slotted. Back wired Dead-Front design. Add "-C" to catalog numbers for Canadian screws. Autorip Rating Cord Body Catalog No Straight " Black 5266NH 5269NH ( mm) & hite Straight " Clear 5266NHC 5269NHC ( mm) Straight " Orange I5266NH Isolated round ( mm) Straight " Black 5366NH 5369NH* ( mm) & hite Straight " Clear 5366NHC 5369NHC* ( mm) * Not CSA certified 1.375" (34.9mm) 1.52" (38.6mm) 5266NHC 1.375" (34.9mm) 1.83" (46.5mm) I-2 STRAIHT BLADE PLUS AND 1.83" (46.5mm) 1.52" (38.6mm) 5369NHC TESTIN & CODE (file no. E3663), UL verified to Federal Spec. C-596F, CSA Certified to C22.2 no. 42 (file no. LR7087), except as noted. 5-20P 5-20R 5-15P 5-15R Nylon; clear devices are Nylon and polycarbonate. -40 C to 75 C.

8 Hospital rade Quickeze Nylon Plugs Twist on cover eliminates exposed assembly screws. Nylon Dead-Front construction. 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V Back wired clamp type terminals. Fast wiring design terminals located on one side only. I-3 STRAIHT BLADE PLUS AND 1.40" (35.5mm) 1.40" Dia. (35.6mm) 2.18" Min. Cord (55.4mm) 2.35" Max. Cord (59.7mm) 8115V 2.18"(55.4mm) Min. Cord 2.35"(59.7mm) Max. Cord 8666V Quickeze Plugs Rating Cord Body Catalog No. A V/AC NEMA Description Diameter Color Plug Straight " ray 8115V ( mm) Straight " hite 8115V ( mm) Straight " Black 8115VBK ( mm) Straight " ray 8364V ( mm) Straight " ray 8666V ( mm) Straight " ray 8466V ( mm) * Not CSA certified Quick rip TM Nylon Dead-Front Plug One piece design and quick drive screws for fast wiring. Combination head screws: Phillips/Robertson/slotted. TESTIN & CODE (file no. E3663), except 8115: (file no. E146159). CSA Certified to C22.2 no.42 (file LR7087), except 8115: (file no. LR1765). 1.34" (34.0mm) 1.22" (31.0mm) " (46.0mm) Quick rip Dead-Front Plug Rating Cord Body Catalog No. A V/AC NEMA Description Diameter Color Plug Straight " ray 8115 ( mm) Nylon. -40 C to 95 C except for 8115: -40 C to 75 C. 5-15P 6-15P 5-20P 6-20P

9 Hospital rade Thermoplastic Hospital rade High impact-resistant thermoplastic housings. Assembly screws are speed-threaded and captive, reducing installation time. Solid brass plug blades are firmly embedded in body. See-through terminal cover and body allows inspection of connections. Terminals in individual chambers to positively insulate conductors. 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V Clearly marked rating, NEMA configuration and standard compliances (third-party listing) on face of device. Terminal screws backed out ready for wiring. Combination slot/phillips head mounting and terminal screws ease installation with power screwdrivers. (Slot/Robertson screws in Canada where available). Hospital rade Rating Cord Body Catalog No Straight " Clear ( mm) Straight " Clear ( mm) Straight " Clear ( mm) Straight " Clear ( mm) 1.80" (45.7mm) 1.36" (34.5mm) 1.54" (39.1mm) " (34.3mm) I-4 STRAIHT BLADE PLUS AND 2.61" (66.3mm) 1.54" (39.1mm) 8269 TESTIN & CODE (file no. E15012) UL verified to Federal Spec. C-596. CSA Certified, (file no ( )). to C22.2 no 42. NOM Certified. 5-15P 5-15R 5-20P 5-20R 6-15P 6-15R 6-20P 6-20R Polycarbonate and PVC Environmental: Meets flammability requirements per UL 94, V2 rated. -20 C to 60 C.

10 Industrial Specification rade 2 Pole, 3 ire rounding 3 Pole, 3 ire Non-rounding 4 Pole, 4 ire Non-rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V NEMA 7-20, 20A 277V NEMA 10-20, 20A 125/250V NEMA 18-20, 20A 120/280V 3Ø I-5 STRAIHT BLADE PLUS AND 2.06" (52.3mm) 1.50" (52.3mm) 1.28" (32.5mm) " (34.9mm) 1.5" (38.1mm) " (37.1mm) 1.437" (36.5mm) 0.625" (15.9mm) Safety rip TM Nylon Dead-Front Nylon back-wired Dead-Front construction. Neoprene gasket seals cord hole opening. Dual range cord grip design. Combination head screws: U.S. Phillips/slotted; Can. Robertson/slotted. Add "-C" to catalog numbers for Canadian Screws. Safety rip Dead-Front Straight " Black & hite 6266* 6269* ( mm) Angle " Black & hite 6265* ( mm) Straight " Black & hite 6666* 6669* ( mm) Straight " Black & hite ( mm) Straight " Black & hite ( mm) Straight " Black & hite 7624N ( mm) / Straight " Black & hite 9151N ( mm) / Straight " Black & hite 7251N 208V 3Ø ( mm) 1.37" (34.8mm) * Not Fed. Specs. Not CSA listed 0.87" (22.2mm) TESTIN & CODE (file no. E3663,) UL verified to Federal Spec. C-596, except as noted. Listed to CSA, C22.2 no 42. (file no. LR7087), except as noted. 1.50" (38.1mm) " (70.4mm) 5-15P 5-15R 6-15P 6-15R 5-20P 5-20R Z Z 6-20P 6-20R Nylon. -40 C to 75 C. 7-20P 7-20R 10-20P 10-20R 18-20P 18-20R

11 Industrial Specification rade Autorip TM Nylon Dead-Front Neoprene gasket seals cord hole opening. Back wired Dead-Front design. All nylon construction reduces breakage and provides excellent chemical resistance. Automatic cord grip clamps the cord during assembly. Combination head screws: U.S. Phillips/slotted; Can. Robertson/slotted. Add "-C" to catalog numbers for Canadian Screws. Autorip Dead-Front Straight " Black 5266N 5269N ( mm) & hite Straight " ellow 5266NCR 5269NCR Corrosion Resistant ( mm) Straight " Orange I5266N Isolated round ( mm) Straight " Black 5666N 5669N ( mm) & hite Straight " Black 5366N 5369N* ( mm) & hite Straight " ellow 5366NCR 5369NCR* Corrosion Resistant ( mm) Straight " ellow 5366N 5369N* ( mm) Straight " Black 5466N 5469N* ( mm) & hite / Straight " ellow 5757* 250 ( mm) V Straight " ellow 5783* 3Ø ( mm) 5-15P 5-15R 6-15P 6-15R 5-20P 5-20R 2 Pole, 3 ire rounding 3 Pole, 4 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V NEMA 14-20, 20A 125/250V, NEMA 15-20, 20A 250V 3Ø 14-20P 14-20R 6-20P *Not CSA listed Not Federal Spec P Z Z 6-20R 15-20R 1.51" (38.4mm) 1.51" (38.4mm) 1.83" (46.5mm) 1.37" (34.8mm) 1.51" (38.4mm) 1.83" (46.5mm) 2.03" (51.6mm) 5266N 5269N 1.83" (46.5mm) 5366NCR 5369NCR 0.33"-0.90" (8.4mm-23.0mm) " (46.5mm) 1.375" (34.9mm) 1.51" (38.4mm) 1.51" (38.4mm) 1.37" (34.8mm) 2.97"-3.37" (75.4mm-85.6mm) I-6 STRAIHT BLADE PLUS AND TESTIN & CODE (file no. E3663). Federal Spec. C-596, except 5757 & 5783: (file no. E146159). CSA listed to C22.2 no 42. (file no. LR7087.) Nylon, except 5757 & 5783: ABS/PVC. -40 C to 75 C.

12 Industrial Specification rade 2 Pole, 3 ire rounding 3 Pole, 3 ire Non-rounding NEMA 5-15, 15A 125V NEMA 5-20, 20A 125V NEMA 6-15, 15A 250V, NEMA 6-20, 20A 250V NEMA 10-20, 20A 125/250V I-7 STRAIHT BLADE PLUS AND TESTIN & CODE (file no. E3663).. UL verified to Federal Spec. C-596 except as noted. CSA Certified to C22.2 no. 42. (file no ( )), NOM Certified. Polycarbonate and PVC. Environmental: Meets flammability requirements per UL 94, V2 rated. -40 C to 75 C. 1.36" (34.5mm) 1.54" (39.1mm) " (36.1mm) 1.25" (31.8mm) 5266AN 1.35" (34.3mm) 1.53" (38.9mm) " (43.3mm) 1.95" (49.5mm) 2.61" (66.3mm) Industrial Specification rade Polycarbonate High impact-resistant thermoplastic housings with easy-grip grooves. Assembly screws are speed-threaded and captive, reducing installation time. Solid brass plug blades are firmly embedded in body. See-through terminal cover allows inspection of connections. Terminals in individual chambers to positively insulate conductors. Clearly marked rating, NEMA configuration and standard compliances (third-party listing) on face of device. Terminal screws backed out ready for wiring. Angle plugs have eight possible positions for maximum convenience. Combination slot/phillips head mounting and terminal screws ease installation with power screwdrivers. (Slot/Robertson screws in Canada where available). Industrial Specification rade Polycarbonate Straight " Black ** ( mm) & hite Angle " Black 5266AN** ( mm) & hite Straight " Black ** ( mm) & hite Angle " Black 5366AN ( mm) & hite Straight " Black ** ( mm) & hite Angle " Black 5666AN ( mm) & hite Straight " Black ** ( mm) & hite Angle " Black 5466AN ( mm) & hite / Straight " Black 5236 ( mm) & hite ** Not Fed. Specs. 5-15P 6-20P 6-20R 5-15R 5-20P 10-20P 5-20R 10-20R 6-15P 6-15R

13 Industrial Specification rade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V, NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V Quickeze Nylon Dead-Front Plugs Nylon backed-wired Dead-Front construction. Twist on cover eliminates assembly screws. All terminal screws located on same side for fast wiring. Automatic cord grip clamps the cord during assembly. Combination head screws: U.S. Phillips/slotted; Can. Robertson/slotted. Add "-C" to catalog numbers for Canadian Screws. Quickeze TM Dead-Front Plugs A V/AC NEMA Description Diameter Color Plug Straight " ray 5965V ( mm) Straight " ellow 5965VCR Corrosion Resistant ( mm) Straight " ray 5666V ( mm) Straight " ray 5364V ( mm) Straight " ellow 5364VCR Corrosion Resistant ( mm) Straight " ray 5464V ( mm) 1.40" Dia. (35.6mm) 5965V 1.40" Dia. (35.6mm) 5965VCR 2.18" Min. Cord (55.4mm) 2.35" Max. Cord (59.7mm) 2.18" Min. Cord (55.4mm) 2.35" Max. Cord (59.7mm) I-8 STRAIHT BLADE PLUS AND 1.40" (35.6mm) 2.18" Min. Cord (55.4mm) 2.35" Max. Cord (59.7mm) 5364VCR TESTIN & CODE (file no. E3663). Listed to CSA, C22.2 no. 42. (file no. LR7087). 5-15P 5-20P 6-15P 6-20P Nylon. -40 C to 95 C.

14 Industrial Specification rade 2 Pole, 3 ire rounding 3 Pole, 3 ire Non-rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V, NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V Non-NEMA 15/10A, 125/250V I-9 STRAIHT BLADE PLUS AND 1.81" (46.0mm) 2.625" (66.7mm) 1.34" (34.0mm) " (31.0mm) 1.34" 1.22" (34.0mm) (31.0mm) Quickrip TM Dead-Front One piece design and quick drive screws for fast wiring. High visibility yellow nylon for chemical and impact resistance. Combination head screws: Phillips/Robertson/slotted. UL verified to Federal Spec. C-596F, CSA certified. Quickrip Dead-Front Straight " ellow ( mm) Straight " Black 5965BK 5969BK ( mm) Straight " ellow ( mm) Straight " ellow ( mm) Straight " ellow ( mm) " (35.5mm) 2.28" (57.9mm) Rubber Dead-Front Plugs 15/10 125/250 Non-NEMA Straight " Black 4475** ( mm) " Black 4472** ( mm) ** Not Fed. Specs. TESTIN & CODE (file no. E146159).. UL verified to Federal Spec. C-596 CSA certified to C22.2 no. 42, (file no. LR1765). (4475 and 4472 are not UL or CSA listed). 1.53" (38.9mm) P 5-15R 5-20P 5-20R 6-15P 6-15R -40 C to 75 C. 6-20P 6-20R NON-NEMA 15A 125V 10A 250V RECEPTACLE NON-NEMA 15A 125V 10A 250V PLU

15 Industrial Specification rade Flanged Inlets and Outlets 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V, NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V Industrial Specification rade Flanged Inlets and Outlets Mounting holes interchangeable with other designs. Back wired clamp type terminals. Industrial Specification rade Flanged Inlets and Outlets 2 Pole, 3 ire rounding Rating Cord A V/AC NEMA Description Diameter Color Catalog No Nylon Inlet Black & hite 5278C Nylon Outlet Black & hite 5279C* Metal Shell Inlet Metal 5278 Metal Shell Inlet Metal 5288* with Reversed Shell Metal Shell Outlet " Metal 5289* with Cord rip ( mm) Metal Shell Outlet, Metal 5246 Side ire Nylon Inlet Black & hite 5678C Nylon Outlet Black & hite 5679C* Nylon Inlet Black & hite 5778C Nylon Outlet Black & hite 5779C* Nylon Inlet Black & hite 5878C Nylon Outlet Black & hite 5879C* *Not CSA Certified 2.0" (50.8mm) 1.56" (39.6mm) " (65.0mm) 1.71" (43.4mm) 5278C 2.1" (13.5mm) 1.75" (44.5mm) 2.5" (63.5mm) " (36.3mm) 1.84" (46.7mm) 0.20" (5.2mm) 0.53" (13.5mm) I-10 STRAIHT BLADE PLUS AND TESTIN & CODE, (file no. E3663) for inlets and (file no. E2369) for outlets. CSA Certified to C22.2 no. 42 (file LR7087). 5-15P 5-15R 5-20P 5-20R 6-15P 6-15R 6-20P 6-20R Nylon, except Metal flanged devices: Phenolic. 5246: lass filled Nylon. Environmental: Flammability per UL 94 requirements, V2 rated. -40 C to 75 C, except 5278, 5288, 5279, 5289, 5246, 5656, 5787: -40 C to 105 C.

16 R C Insulated Straight Blade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V Insulated Straight Blade 1.69" (42.9mm) 2.09" (53.2mm) Thermoplastic elastomeric exteriors outperform rubber when exposed to moisture, chemicals, oils, and the effects of ultraviolet radiation and ozone attack. Connector and plug exteriors can be reversed to shroud plug blades. Available closure cap can be used on plug or connector to protect from abuse, dirt or moisture. 15A and 20A Insulated Straight Blade High visibility safety yellow for identification. Contacts, blades and terminal screws nickel plated for corrosion resistance. Stainless steel assembly and cord grip screws for corrosion resistance. Add "-C" to catalog numbers for Canadian Screws. I-11 STRAIHT BLADE PLUS AND " (42.9mm) Rating Catalog No. A V/AC NEMA Description Color Plug Connector Straight ellow Straight ellow Straight ellow Straight ellow " (71.4mm) Accessories 1547 Accessories Description Plug closure cap Catalog No. 14 TESTIN & CODE (file no. E3663). cul certified for Canada to C22.2 no. 42 (file no. E3663). Closure Cap not UL or cul listed. 14 Thermoplastic elastomeric (TPE) exterior. lass filled Nylon and glass filled polypropylene interior. -40 C to 70 C. 5-15P 5-15R 5-20P 5-20R 6-15P 6-15R 6-20P 6-20R

17 R atertight Straight Blade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V C atertight Straight Blade Thermoplastic elastomeric exteriors outperform rubber when exposed to moisture, chemicals, oils, and the effects of ultraviolet radiation and ozone attack. Mated plug and connector form a watertight seal that meets the requirements of NEMA 3R, 4 and ithstands water spray test at 800 psi. Connector supplied with closure cap for watertight seal when connector not in use. Optional plug cap available. 15A and 20A atertight Straight Blade High visibility safety yellow for identification. Contacts, blades and terminal screws nickel plated for corrosion resistance. Quick drive, stainless steel assembly screws for fast installation. Color coded neoprene grommets for a watertight seal on a wide range of cord sizes. Add "-C" to catalog numbers for Canadian Screws. Rating Catalog No. A V/AC NEMA Description Color Plug Connector Straight ellow Straight ellow Straight ellow " (87.3mm) 1.81" (46.0mm) " (65.1mm) I-12 STRAIHT BLADE PLUS AND Straight ellow " (101.6mm) Accessories Accessories Description Catalog No " (40.5mm) Plug closure cap 14 Replacement connector closure cap 15 ire mesh grip, cord dia. 0.30"-0.50" (7.6mm-12.7mm) M115 ire mesh grip, cord dia. 0.50"-0.62" (12.7mm-15.7mm) M " (25.4mm) M " (177.8mm) 1.40" (35.6mm) TESTIN & CODE (file no. E3663). cul certified for Canada to C22.2 no. 42 (file no. E3663). 14, 15, M115, M116 not UL or cul listed. 5-15P 5-15R 5-20P 5-20R 6-15P 6-15R 6-20P 6-20R Thermoplastic elastomeric (TPE) exterior. lass filled Nylon and glass filled polypropylene interior. -40 C to 70 C.

18 R C atertight Boots eather Protective Boots Designed for use with Safety rip, Autorip and Quickeze plugs and connectors. Black neoprene resists oil, grease, acids and has long life properties. Flexible and easy to apply to plug or connector. Cord hole opening can be cut away for large diameter cords. Carries IP55 environmental rating when applied to mating plug and connector. eather Protective Boots Description Fits Autorip and Safety rip plugs when used with connector equipped with BS2, receptacle or outlet, connectors when used with inlet Catalog No. BS1 I-13 STRAIHT BLADE PLUS AND BS1 Fits Autorip and Safety rip connectors when used with mating plug equipped with BS1 Fits Quickeze plugs when used with receptacles and mating connector equipped with BS2 BS2 BS3 BS2 BS3 TESTIN & CODE Listed to UL 514C and cul Certified to CSA C22.2 no.18 (file no. E2458). UL tested to IEC529 IP55 environmental rating. Neoprene. -40 C to 105 C.

19 Commercial Specification rade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V Thermoplastic Solid brass plug blades are firmly embedded in body. Terminal screw clamps are designed to contain wire and prevent binding. Terminal screws backed out ready for wiring. Terminals in individual chambers to positively insulate conductors. Vinyl angle plugs have eight possible positions for maximum convenience. Combination slot/phillips head mounting and terminal screws ease installation with power screwdrivers. (Slot/Robertson screws in Canada where available). Vinyl Straight 0.25"-0.655" ellow (6.35mm-16.64mm) Angle 0.25"-0.655" ellow 4867AN (6.35mm-16.64mm) 0.25"-0.655" hite 4867AN (6.35mm-16.64mm) Straight 0.25"-0.655" ellow (6.35mm-16.64mm) Angle 0.25"-0.655" ellow 4409AN (6.35mm-16.64mm) Straight 0.25"-0.655" ellow (6.35mm-16.64mm) Angle 0.25"-0.655" ellow 4866AN (6.35mm-16.64mm) Straight 0.25"-0.655" ellow (6.35mm-16.64mm) Angle 0.25"-0.655" ellow 4509AN (6.35mm-16.64mm) 1.25" (31.8mm) 1.54" (39.1mm) " (34.3mm) 1.54" (39.1mm) " (36.1mm) 1.65" (41.9mm) 2.61" (66.3mm) I-14 STRAIHT BLADE PLUS AND 1.50" (38.1mm) 4409AN 1.95" (49.5mm) TESTIN & CODE Listed UL 498 (file no. E15012). CSA Certified to C22.2 no. 42 (file no. LR2081 ( )). NOM Certified. 5-15P 5-15R 5-20P 5-20R 6-15P 6-15R 6-20P 6-20R Polypropylene and PVC. Environmental: Meets flammability requirements per UL 94, VO rated. -20 C to 60 C.

20 Commercial Specification rade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V I-15 STRAIHT BLADE PLUS AND 1.38" (35.0mm) 1.52" (38.6mm) " (35.0mm) 1.52" (38.6mm) " (35.0mm) 1.52" (38.6mm) N 1.83" (46.5mm) 1.83" (46.5mm) 1.83" (46.5mm) Nylon Solid brass plug blades are firmly embedded in body. Terminal screw clamps are designed to contain wire and prevent binding. Terminal screws backed out ready for wiring. High visibility product available in three colors for quick location and identification of plugs in the middle of a job site. High visibility product contains neoprene dust cover which prevents dust from entering the plug or connector at the cable entrance. Combination slot/phillips head mounting and terminal screws ease installation with power screwdrivers. (Slot/Robertson screws in Canada where available). High Visibility Straight 0.25"-0.656" Fluorescent N N (6.35mm-16.66mm) reen Straight 0.25"-0.656" Fluorescent RN RN (6.35mm-16.66mm) Orange Straight 0.25"-0.656" Bright (6.35mm-16.66mm) ellow Nylon Straight 0.25"-0.656" ellow (6.35mm-16.66mm) Straight 0.25"-0.656" ellow (6.35mm-16.66mm) Straight 0.25"-0.656" ellow (6.35mm-16.66mm) Straight 0.25"-0.656" ellow (6.35mm-16.66mm) 1.38" (35.0mm) TESTIN & CODE (file no. E15012). CSA Certified C22.2 no. 42 (file no ( )). NOM Certified. Nylon. -40 C to 75 C. 1.52" (38.6mm) RN 1.83" (46.5mm) 5-15P 5-15R 5-20P 5-20R 6-15P 6-15R 6-20P 6-20R

21 Commercial Specification rade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V NEMA 6-15, 15A 250V NEMA 5-20, 20A 125V NEMA 6-20, 20A 250V NEMA 7-15, 15A 277V Vinyl Armored and Rubber Plugs Solid brass plug blades are firmly embedded in body. Terminal screw clamps are designed to contain wire and prevent binding. Terminal screws backed out ready for wiring. Terminals in individual chambers to positively insulate conductors. Armored housing automatically grounded. Combination slot/phillips head mounting and terminal screws ease installation with power screwdrivers. (Slot/Robertson screws in Canada where available). Vinyl Armored Plugs Straight " ellow ( mm) Straight " ellow ( mm) Straight " ellow ( mm) Straight " ellow ( mm) Straight " ellow 2839* ( mm) *Not NOM 1.93" (49.0mm) 1.65" (41.9mm) 1.87" (47.4mm) " (34.3mm) 1.86" (47.2mm) 2.60" (66.0mm) 1.50" (38.1mm) " (39.1mm) I-16 STRAIHT BLADE PLUS AND Thermoplastic Rubber Plugs Straight " Black * ( mm) Straight " Black ( mm) Straight " Black 1703 ( mm) 5-15P 5-15R 5-20P 6-20P 5-20R 6-20R * Not NOM Not NOM or CSA 6-15P 7-15P 6-15R 7-15R " (39.1mm) 1.36" (34.5mm) 0.85" (21.6mm) " (50.8mm) 2.90" (73.7mm) TESTIN & CODE (file no. E15012). CSA Certified to C22.2 no. 42 (file no ( )). NOM Certified, except as noted. PVC and Thermoplastic Rubber. Environmental: Meets flammability requirements per UL 94, VO rated except C to 60 C., except #229: -20 C to 70 C.

22 1.54" (39.1mm) Commercial Specification rade 2 Pole, 2 ire Non-rounding NEMA 1-15, 15A 125V Commercial rade I-17 STRAIHT BLADE PLUS AND 1.65" (41.9mm) 1.95" (49.5mm) 1.25" (31.8mm) " (38.1mm) 4862AN 1.36" (34.5mm) 1.42" (36.1mm) Solid brass plug blades are firmly embedded in body. Terminal screw clamps are designed to contain wire and prevent binding. Terminal screws backed out ready for wiring. Terminals in individual chambers to positively insulate conductors. Vinyl angle plugs have eight possible positions for maximum convenience. Vinyl plugs and TPR rubber connectors resist chemical attack and stay flexible in extremely low temperatures. Armored housing automatically grounded. Combination slot/phillips head mounting and terminal screws ease installation with power screwdrivers. (Slot/Robertson screws in Canada where available). Vinyl Straight " ellow * ( mm) Angle " hite 4862AN* ( mm) *Not NOM TESTIN & CODE (file no. E15012). SA555C: CSA certified to C22.2 no. 42 (file no ( )). NOM Certified, except as noted. Polypropylene, PVC and Thermoplastic Rubber. Environmental: Meets flammability requirements per UL 94, VO rated except C to 60 C except 224: -20 C to 70 C. 1.50" (38.1mm) " (34.3mm) 1.54" (39.1mm) " (34.3mm) 1.50" (38.1mm) " (39.4mm) 2.61" (66.3mm) 2.37" (60.2mm) Vinyl Armored Straight " ellow * ( mm) *Not NOM Rubber Straight " Black * ( mm) Straight " Black SA555C* Polarized ( mm) *Not NOM 1-15P 1-15R

23 Standard rade 2 Pole, 3 ire rounding NEMA 5-15, 15A 125V Standard rade Tough thermoplastic construction. Plug blades are firmly embedded in body. Thermoplastic Straight 0.67" (17.02mm) Orange Straight 0.32" (8.13mm) Black SA399 SA993 Straight 0.32" (8.13mm) Brown SA399B SA993B Straight 0.32" (8.13mm) ray SA399 SA993 Straight 0.32" (8.13mm) reen SA399N SA933N Straight 0.32" (8.13mm) Orange SA399O SA993O Straight 0.32" (8.13mm) hite SA399 SA993 Rubber Straight 0.39" (9.91mm) Black 142 Square 1.72" (43.7mm) " (66.0mm) " (27.4mm) 1.54" (39.1mm) 1.54" 1.37" (39.1mm) (34.8mm) I-18 STRAIHT BLADE PLUS AND 1.22" (31.0mm) 1.56" (39.6mm) 0.70" (17.8mm) 0.70" (17.8mm) 5-15P 5-15R 1.43" (36.3mm) 1.08" (27.4mm) SA " (31.0mm).70".70" (17.8mm) (17.8mm) SA " (57.2mm) TESTIN & CODE (file no. E15012). CSA Certified to C22.2 no. 42 (file no. LR2081 (file no ( , )). Polypropylene except 142: Rubber. Meets flammability requirements per UL 94, VO rated except C to 60 C except 142: -20 C to 70 C.

24 Standard rade 2 Pole, 2 ire Non-rounding NEMA 1-15, 15A 125V 1.17" (29.7mm) Rubber Angle plugs allow placement of cord in convenient location. Plug blades are firmly embedded in body. Terminal screws backed out ready for wiring. I-19 STRAIHT BLADE PLUS AND 0.73" (18.5mm) " (30.0mm) Rubber 1.15" Angle 0.328" (8.33mm) Black 84BK 86BK (29.2mm) hite Angle 0.328" (8.33mm) Black 84-6BK 86BK Polarized hite Straight 0.328" (8.33mm) Black 183BK 86BK hite Straight 0.328" (8.33mm) Black 183-6BK 86BK Polarized hite " (50.8mm) " (29.7mm) 0.73" (18.5mm) TESTIN & CODE (file no. E15012). Polarized plugs: CSA Certified to C22.2 no 42. (file no. LR2081 ( , )). NOM Certified. 0.71" (18.0mm) " (31.8mm) Thermoplastic Rubber. -20 C to 70 C. 1-15P 1-15R

25 Standard rade 2 Pole, 2 ire NEMA 1-15, 15A 125V Thermoplastic Plugs Plug blades are firmly embedded in body. Terminals in 6862/6882 have individual chambers to positively insulate conductors. 1.48" (37.6mm) Thermoplastic Flat Handle 0.312" (7.92mm) Brown 1912B Triple Outlet Connector Converts cord end into three two wire outlets " (7.92mm) hite 1912 Round 0.406" (10.31mm) Black 3123BK 0.437" (11.10mm) Black 179* " Orange ( mm) * Not UL listed, or CSA certified. 0.92" (23.4mm) " (32.5mm) 1.19" (30.2mm) I-20 STRAIHT BLADE PLUS AND Triple Outlet Connector A V/AC NEMA Description Size Color Plug Connector 1.50" (38.1mm) Cord End 18-SPT Brown 1186B* Triple Outlet Ivory 1186V* * Not UL listed; not CSA certified; not NOM P 1-15R 1.13" (28.7mm) " (49.3mm) TESTIN & CODE (file no. E except as noted. CSA certified to C22.2 no. 42 (file no. LR 2081 ( , )) except as noted. NOM Certified, except as noted. Polypropylene and PVC except 1186: Urea. Meets flammability requirements per UL 94, VO rated, except C to 60 C, except 1186: -40 C to 65 C.

26 R C 1.16" (29.5mm) Standard rade 2 Pole, 2 ire NEMA 1-15, 15A 125V I-21 STRAIHT BLADE PLUS AND 0.75" (19.1mm) 0.62" (15.7mm) 0.75" (19.1mm) SA " (19.1mm) 1.16" (29.5mm) SA440 SA " (34.8mm) 1.37" (34.8mm) 0.62" (15.7mm) 0.75" (19.1mm) 1.16" (29.5mm) 0.62" (15.7mm) 0.75" (19.1mm) 1.37" (34.8mm) Spring Action Clip provides cord grip for easy storage on appliances such as vacuum cleaners, fans, etc. Made of high impact-resistant thermoplastic for long-term durability. Thermoplastic Straight w/ 0.328" (8.33mm) Black SA840 SA155 Cord Clip Brown SA840B SA155B hite SA840 SA Straight w/ 0.328" (8.33mm) Black SA940 SA155 Cord Clip Brown SA940B SA155B Polarized hite SA940 SA Straight 0.328" (8.33mm) Black SA440 SA155 Brown SA440B SA155B hite SA440 SA Straight 0.328" (8.33mm) Black SA540 SA155 Polarized Brown SA540B SA155B old SA540D SA155D hite SA540 SA " (29.5mm) TESTIN & CODE (file no. E15012), cul listed to CSA C22.2 no. 42 (file no. E15012) except SA155: CSA Certified (file no. LR2081 ( , )). NOM Certified. PVC and ABS. Meets flammability requirements per UL 94, VO rated. -20 C to 60 C. 0.62" (15.7mm) 0.75" (19.1mm) 0.75" (19.1mm) SA " (29.7mm) 1.37" (34.8mm) 1.07" (27.2mm) 1.78" (45.2mm) 0.62" (15.7mm) 0.75" (19.1mm) SA P 1-15R

27 Standard rade 2 Pole, 2 ire NEMA 1-15, 15A 125V Academy Plugs High impact-resistant thermoplastic housing with finger-grip grooves. Super Plug has right angle design and built-in strain relief. Insulation piercing terminals eliminate need for tools just snap in unstripped wire and device is ready for use. Plug blades are firmly embedded in body. Super Plug Rating A V/AC NEMA Description Cord Size Color Catalog No Super Plug 18-2 SPT-2, Brown 2600B 0.85" (21.6mm) 16-2 SPT-2, Black 2600BK 18-2 HPN, hite HPN Super Plug 18-2 SPT-2, Brown B Polarized 16-2 SPT-2, Black BK 18-2 HPN, hite HPN " (45.0mm) I-22 STRAIHT BLADE PLUS AND Easy Install Plug Rating A V/AC NEMA Description Cord Size Color Catalog No 1.00" (25.4mm) Easy Install Plug 18-2 SPT-1 Brown 2601B Black Clear hite 2601BK 2601CL " (20.6mm) 1.13" (28.7mm) Easy Install 18-2 SPT-1 Brown B Plug Polarized Black BK Clear CL 2601 hite P 1-15R TESTIN & CODE (file no. E15012). CSA Certified to C22.2 no. 42 (file no. LR2081 ( , )). Polycarbonate. Meets flammability requirements per UL 94, V2 rated. -40 C to 70 C.

28 Standard rade 2 Pole, 2 ire NEMA 1-15, 15A 125V 0.81" 0.81" (20.6mm) (20.6mm) Academy Outlets 2.02" (51.3mm) High impact-resistant thermoplastic housing virtually indestructible. Insulation piercing terminals eliminate need for tools just snap in unstripped wire and device is ready for use. Outlets quickly add a receptacle to ordinary household wire. 0.84" (21.3mm) " (29.2mm) Outlets Rating A V/AC NEMA Description Cord Size Color Catalog No Cord End Triple Outlet 18-2 SPT-1 Brown 2602B (Cube Tap) hite 2602 I-23 STRAIHT BLADE PLUS AND " (65.5mm) Cord End Triple Outlet 18-2 SPT-1 Brown 2603B (Table Tap) hite Cord End Outlet, 18-2 SPT-1, Brown 2607B Polarized 18-2 SPT-2, Black 2607BK 18-2 HPN hite In-Line Outlet, 18-2 SPT-1, Brown 2606B Polarized 18-2 HPN Black 2606BK 1.08" (27.4mm) hite In-Line Outlet 18-2 SPT-1 Brown 2609B Black 2609BK 1.25" (31.8mm) hite " (27.7mm) 0.88" (22.4mm) " (31.8mm) TESTIN & CODE All 2607 s are listed to UL 498 (file no. E15012). All 2607 s are NOM Certified. 0.88" (22.4mm) " (27.7mm) Polycarbonate. Meets flammability requirements per UL 94, V2 rated. -40 C to 70 C..44" (11.2mm) " (19.8mm) 1-15P 1-15R

29 Industrial Specification rade Power Plugs 2 Pole, 3 ire rounding NEMA 5-30, 30A 125V NEMA 6-30, 30A 250V NEMA 7-30, 30A 277V NEMA 5-50, 50A 125V NEMA 6-50, 50A 250V NEMA 7-50, 50A 277V Industrial Specification rade Power Plugs, Connectors and Flanged Inlets Neoprene gasket seals cord hole opening on Autorip " Plug; prevents dust/moisture from entering wiring chamber. Autorip "automatic cord grip clamps cord during assembly and reduces wiring time. Back wired dead-front construction with easy wire clamp type terminals. Tapered cord grip cover eliminates cord snags. High strength thermoplastic plug resists breakage in high abuse locations. Angle plug provides four different cord positions. Terminals accept No. 12A No. 4A conductors. Thermoplastics suitable for 85ºC/185ºF continuous use. Autorip Plugs, Connectors and Flanged Inlets Flanged Inlet Straight " ray 5717N 6716N 5717NFI ( mm) Angle " ray 5717AN ( mm) Straight " ray 5701N 6700N 5701NFI ( mm) Angle " ray 5701AN ( mm) Straight " ray 5703N 6795N 5703NFI ( mm) Angle " ray 5703AN ( mm) Straight " ray 5712N 6711N 5712NFI ( mm) Angle " ray 5712AN ( mm) Straight " ray 5710N 6709N 5710NFI ( mm) Angle " ray 5710AN ( mm) Straight " ray 5705N 6796N 5705NFI ( mm) Angle " ray 5705AN ( mm) 5-30P 5-30R 6-30P 6-30R 7-30P 6-50P 7-30R 6-50R 5-50P 7-50P 5-50R 7-50R 3.12"Dia. (79.2mm) 2.59" (65.8mm) 3.12" (79.2mm) 4.30" (109.2mm) 5717N 6716N 1.88" (47.8mm) 5717AN 3.34" Min. (84.8mm) 3.81" Max. (96.8mm) Length Varies ith Cord Dia. 4.71" Min. (119.6mm) 5.19" Max. (131.8mm) Length Varies ith Cord Dia. 3.00" (76.2mm) I-24 STRAIHT BLADE PLUS AND TESTIN & CODE Plugs & Inlets: UL verified to Fed. Spec. C-596 (file no. E3663). CSA certified to C22.2 no. 42 (file no. LR7087), except connectors. Plugs, Nylon and Polypropylene; Angle Plugs: Nylon and ABS. Connectors: Nylon, Polypropylene, Phenolic. Environmental: Flammability per UL 94 requirements, Angle Plugs & Inlets: V2 rated. -40 C to 95 C except Angle Plugs: -40 C to 85 C Inlets: -40 C to 75 C.

30 Commercial Specification rade Power Plugs 2 Pole, 3 ire rounding NEMA TT-30, 30A 125V NEMA 5-30, 30A 125V NEMA 6-30, 30A 250V NEMA 5-50, 50A 125V NEMA 6-50, 50A 250V I-25 STRAIHT BLADE PLUS AND 2.38" (60.4mm) 3.28" (83.3mm) 1.03" (26.2mm) 1.81" (46.0mm) 2.12" (53.8mm) 2.80" (71.1mm) " (63.5mm) 2.10" (53.3mm) 1.42" (36.1mm) " (74.2mm) Commercial rade Power Plugs Dual current models are furnished with blades for 30 and 50 amp applications Terminals have pressure plates to protect wires. Models 41 and 42 made from abuse resistant thermoplastic. Standard rade Power Plugs and Receptacles Rating Cord Matching A V/AC NEMA Description Diameter Color Plug Receptacle TT-30 Angle Travel 0.635" max. Black * Trailer Phenolic (16.13mm) 30/ /5-50 Angle Vinyl 1.10" max. Black (27.94mm) / /6-50 Angle Vinyl 1.10" max. Black (27.94mm) * * *Not NOM TESTIN & CODE, Plugs: (file no. E15012), Receptacles: (file no ). CSA Certified to C22.2 no. 42, Plugs: (file no. LR2081 ( )). Receptacles: (file no. E15058). NOM Certified, except as noted. Plugs: PVC except 83: Phenolic. Receptacles: Urea and polypropylene. Meet flammability requirements per UL 94, plugs VO rated. Plugs: -20 C to 60 C. Receptacles: -20 C to 75 C. 1.37" (33.0mm) 2.80" (71.1mm) " (33.0mm) 2.80" (71.1mm) " (74.2mm) 2.92" (74.2mm) TT-30P 6-30P TT-30R 5-30P 6-30R 6-50P 5-30R 6-50R 5-50P 5-50R

31 Range and Dryer for Replacement Use Only 3 Pole, 3 ire Non-rounding NEMA 10-30, 30A 125/250V NEMA 10-50, 125/250V Industrial Specification rade Range and Dryer Devices for Replacement Use Only Neoprene gasket seals cord hole opening on Autorip connector; prevents dust/moisture from entering wiring chamber. Autorip automatic cord grip clamps cord during assembly and reduces wiring time. Back wired Dead-Front construction with easy wire clamp type terminals. Tapered cord grip cover eliminates cord snags. High strength thermoplastic connector resists breakage in high abuse locations. Terminals accept #12A-#4A conductors. Thermoplastics suitable for 85ºC/185ºF continuous use. Autorip Plugs, Connectors and Flanged Inlets Flanged Inlet / Straight ray 9337N 9341N 9337NFI ( mm) Angle ray 9352AN ( mm) / Straight ray 4524N 4526N 4524NFI ( mm) Angle ray 7952AN ( mm) Commercial Specification rade Range and Dryer Plugs for Replacement Use Only Dual current model furnished with blades for 30 and 50 amp applications Terminals have pressure plates to protect wires. Model 80 made from abuse resistant thermoplastic. Standard rade Power Plugs and Receptacles Rating Cord Matching A V/AC NEMA Description Diameter Color Plug Receptacle 30/50 125/ /10-50 Angle Universal 0.800" Black BK* Vinyl (20.32mm) 38B 122B 112BK* 32B* 10-30P 10-30R * Not CSA certified Not NOM 10-50P 10-50R 4.713" min. (119.7mm) 5.187" max. (131.7mm) length varies with cord dia " min. (84.2mm) 3.812" max. (96.8mm) length varies with cord dia. 1.37" (33.0mm) 9341N 9337N 2.80" (71.1mm) " 2.59" (79.2mm) (65.8mm) 3.12" (79.2mm) 2.92" (74.2mm) I-26 STRAIHT BLADE PLUS AND TESTIN & CODE Plugs: (file no. E15012) Receptacles: (file no. E15058). CSA Certified to C22.2 no. 42 (file no. LR7087), except as noted. Plugs: Nylon and Polypropylene. Angle Plugs: Nylon and ABS, except 80: PVC. Receptacles: Urea and polypropylene Environmental: Flammability per UL 94 requirements, Autorip plugs, connectors and inlets: V2 rated. 80:VO rated. -40 C to 75 C, except: 80, -20 C to 60 C.

32 Industrial Specification rade Straight Blade Power Plugs 3 Pole, 4 ire rounding NEMA 14-30, 30A 125/250V NEMA 15-30, 30A 250V 3Ø NEMA 14-50, 50A 125/250V NEMA 15-50, 50A 250V 3Ø NEMA 14-60, 60A 125/250V NEMA 15-60, 60A 250V 3Ø Industrial rade Range and Dryer Plugs I-27 STRAIHT BLADE PLUS AND TESTIN & CODE (file no. E3663). UL verified to Federal Spec. C-596, except as noted. CSA Certified to C22.2 no. 42 (file no. LR7087). Plugs, Nylon and Polypropylene. Angle Plugs: Nylon and ABS. Environmental: Flammability per UL 94 requirements, V2 rated. -40 C to 75 C " min. (84.2mm) 3.812" max. (96.8mm) length varies with cord dia " min. (84.2mm) 3.812" max. (96.8mm) length varies with cord dia. 1.88" (47.8mm) 5745N 8462N 3.00" (76.2mm) 8462AN 3.12" (79.2mm) 3.12" (79.2mm) 4.30" (109.2mm) For new range and dryer installations per 1996 NEC sections , and Neoprene gasket seals cord hole opening on Autorip Plug; prevents dust/moisture from entering wiring chamber Autorip automatic cord grip clamps cord during assembly and reduces wiring time. Back wired dead-front construction with easy wire clamp type terminals. Tapered cord grip cover eliminates cord snags. High strength thermoplastic plug resists breakage in high abuse locations. Angle plug provides four different cord positions. Terminals accept #12A-#4A conductors. Range and Dryer Plugs A V/AC NEMA Description Diameter Color Plug / Straight, Autorip Type " ray 5746N ( mm) Angle Cord rip " ray 5732AN for Dryer Devices ( mm) V 3Ø Straight, Autorip Type " ray 8432N ( mm) Angle Cord rip " ray 8432AN ( mm) / Straight, Autorip Type " ray 5745N ( mm) Angle Cord rip " ray 5752AN for Range Devices ( mm) V 3Ø Straight, Autorip Type " ray 8452N ( mm) Angle Cord rip " ray 8452AN ( mm) / Straight, Autorip Type " ray 9462N* ( mm) Angle Cord rip " ray 9462AN* ( mm) V 3Ø Straight,Autorip Type " ray 8462N ( mm) Angle Cord rip " ray 8462AN ( mm) *Not Fed. Spec rated 14-30P Z 15-30P 14-50P Z 15-50P 14-60P Z 15-60P

33 R Commercial Specification rade Power Plugs and Receptacles 3-Pole, 4-ire rounding NEMA 14-30, 30A 125/250V NEMA 14-50, 50A 125/250V NEMA 14-60, 60A 125/250V Commercial Spec rade Power Plugs and Receptacles 2.44" (62.0mm) 4.25" (108.0mm) C 2.75" (69.9mm) 4.87" (123.7mm) Dual current models furnished with blades for 30 and 50 amp configurations. Terminals have pressure plates to protect wires. Unbreakable, abuse-resistant thermoplastic construction. Range and Dryer Plugs Rating Cord Matching A V/AC NEMA Description Diameter Color Plug Receptacle 30/50 125/ /14-50 Angle Vinyl 1.125" Black (28.575mm) / Angle Vinyl 1.125" Black (28.575mm) " (123.7mm) " (72.9mm) 1.37" (34.8mm) " (71.1mm) 3.31" (84.1mm) I-28 STRAIHT BLADE PLUS AND 14-30P 14-30R 14-50P 14-50R 14-60P 14-60R 2.09" (53.1mm) 3.28" (83.3mm) 2.38" (60.5mm) " (63.5mm) 2.01" (51.1mm) " (46.0mm) " (71.1mm) 4.75" (120.7mm) 2.44" (62.0mm) 1.70" (43.2mm) TESTIN & CODE Plugs: (file no. E15012) Receptacles: (file no. E15058). Plugs: cul listed to CSA C22.2 no. 42 (file no. E15012). Receptacles: CSA Certified to C22.2 no. 42 (file no. LR6914 ( )). Nom Certified. Plugs: PVC. Receptacles: Urea and polypropylene. Meets flammability requirements per UL 94, plugs VO rated. Plugs: -20 C to 60 C. Receptacles: -20 C to 75 C.

34 Industrial Specification rade Power Plugs 4 Pole, 4 ire Non-rounding NEMA 18-30, 30A 120/208V 3Ø NEMA 18-50, 50A 120/208V 3Ø NEMA 18-60, 60A 120/208V 3Ø Plugs 4 Pole, 4 ire I-29 STRAIHT BLADE PLUS AND 3.341" Min. (84.2mm) 3.812" Max. (96.8mm) Length Varies ith Cord Dia. 8332N 3.00" (76.2mm) 3.12" (79.2mm) 4.30" (109.2mm) Neoprene gasket seals cord hole opening on Autorip Plug; prevents dust/moisture from entering wiring chamber. Autorip automatic cord grip clamps cord during assembly and reduces wiring time. Back wired dead-front construction with easy wire clamp type terminals. Plugs 4 Pole, 4 ire Tapered cord grip cover eliminates cord snags. High strength thermoplastic plug resists breakage in high abuse locations. Terminals accept No. 12A-No. 4A conductors. A V/AC NEMA Description Diameter Color Plug /208V 3Ø Straight, " ray 8332N Autorip Type ( mm) Angle Cord rip " ray 8332AN ( mm) /208V 3Ø Straight, " ray 8352N Autorip Type ( mm) Angle Cord rip " ray 8352AN ( mm) /208V 3Ø Straight, " ray 5517N Autorip Type ( mm) Angle Cord rip " ray 4516AN ( mm) 1.88" (47.8mm) 8332AN TESTIN & CODE (file no. E3663). CSA Certified to C22.2 no. 42 (file no. LR7087). Plugs: Nylon and Polypropylene, Angle Plugs: Nylon and ABS. Environmental: Flammability per UL 94 requirements, V2 rated. -40 C to 75 C. Z Z 18-30P 18-50P Z 18-60P

35 Commercial Specification rade Power Plugs 4 Pole, 4 ire Non-rounding 60A, 125/250V 3Ø NEMA 18-60, 60A 125/250V 3Ø Commercial Specification rade Power Plug and Receptacles Dual current models furnished with blades for 30 and 50 amp configurations. Terminals have pressure plates to protect wires. Unbreakable, abuse-resistant thermoplastic construction. Plugs 4 Pole, 4 ire Rating Cord Matching A V/AC NEMA Description Diameter Color Plug Receptacle /250V 3Ø Angle Thermoplastic 1.0" Black * (25.40mm) 59 *Not CSA, NOM. 2.62" (66.5mm) 2.87" (72.9mm) 1.37" (34.8mm) " (108.0mm) 3.31" (84.1mm) 2.75" (69.9mm) 4.87" (123.7mm) I-30 STRAIHT BLADE PLUS AND 4.87" (123.7mm) 1169 TESTIN & CODE (file no. E3663). CSA Certified to C22.2 no. 42 (file no. LR7087). Z 18-60P Z 18-60R Plugs: PVC. Receptacles: Urea and polypropylene. Meets flammability requirements per UL 94, plugs VO rated. Plugs: -20 C to 60 C Receptacles: -40 C to 75 C.