TWIST-LOCK Devices. Locking Devices

Transcription

1 TIST-LOCK Devices Locking Devices

2 Features and Benefits Locking Devices The Standard for Locking Receptacles Features and Benefits Boss diameter is 1.562" on 20 and 30A devices for simplifying installation and accessory selection. lass-reinforced thermoplastic polyester base (RTP) has the desirable characteristics of a thermoset material, including heat, flame resistance and dimensional stability. The impact resistance it provides, however, is much greater than that of a thermoset. One-piece contact with long spring arm (low stress) and oxide cutting nibs: prevents stress and overheating associated with riveted contact and short spring arms. High-impact, abuse-resistant nylon face. Face color coding by voltage facilitates locating and mating of proper devices. On the high-impact nylon face of each Hubbell Twist-Lock receptacle is a ring of color. Keyed to an internationally recognized color coding scheme, this ring enables mating devices to be matched quickly. It s just one more example of user-oriented thinking at Hubbell. Twist-Lock receptacles have always held advantages over conventional ones. Today s Twist- Lock receptacles maintain the advantage by combining functional design features, unparalleled quality and pace-setting performance. The terminals in each Hubbell Twist-Lock receptacle are mechanically and electrically the finest available. These terminals incorporate unique design features to contain and hold conductors, including an external backwiring #10 silicon bronze terminal screw provides greater strength and resistance to corrosion and stripping. Anti-rotational clamp has a stop to limit the amount of cocking when only one side is used. Accommodates both back and side wiring. All-brass mounting and grounding system provides a lower resistance ground path and greater resistance to corrosion than steel mounting systems. ire restraint recess for both back and side wiring, greatly reduces the possibility of loosening the terminal connection. wraparound clamp, a wire restraint recess and more. The materials used in every receptacle are of the highest quality. The all brass mounting system provides a safer, lower resistance ground path than those made of steel. The thick wall base is constructed of an engineered thermoplastic to offer the benefits of a thermoset, yet with much greater impact resistance. Hubbell Twist-Lock Receptacles: Voltage color coding on the outside. Proven designs and quality materials on the inside. Any way you look at them, they re the standard of the industry. 125V 250V 277V AC 480V AC 600V AC 125/250V B-14

3 20 and 30 Ampere Plugs and Connector Bodies: The Difference Is INSULRIP...and a hole Lot More Features and Benefits Tough ribbed nylon housing for secure gripping. Two-part cord grip tightens with two screws for maximum retention force. Broad gripping area to accommodate wide range of cable diameters. iring chambers separate and positively insulate conductors and promote easy inspection. Insulated nylon construction to keep non-current carrying parts from becoming energized. They re new and better than ever. They re the same and better than anything else on the market. They re 20 and 30 amp Insulgrip plugs and connectors. e kept the same classic integrity, rock-solid construction and safety features that have made these devices the industry standard. But, we added enhancements because good is never good enough for Hubbell. e improved the contacts with better terminations and an exclusive double rivet design for the female contacts. e restyled the cord grips for a clean, one-piece look and made them stronger at the same time. And we introduced a whole new easier to read identification system. And more, all the while, of Improved terminations include #10 multiple drive screws and thicker.080" clamping nuts. Funneled holes to permit "straightin" conductor insertion. Self-threading screws specially designed for secure assembly. Product indentification is visible while device is in use. Markings include catalog number and ratings printed in the IEC color scheme on the current-carrying portion of the device. Integral dust shield protects wiring chamber from dust or contaminants. Single-piece shield/housing eliminates need for separate step at installation. course, we maintained traditional Insulgrip features and benefits. Like the most powerful cord grip in the industry. Insulgrip s cord gripping design actually clamps the conductors, not just the cable jacket. e kept the same nylon body and housing material for resistance to industrial chemicals, solvents and hydrocarbons. And, the front of each plug is still molded to its specific blade configuration, leaving no holes to invite debris or contamination (plus we added a new dust shield). Of course, the Hubbell Twist-Lock line of plugs and connectors remains the broadest in the industry. So if you prefer proven performance, innovation and selection Hubbell has you covered. Locking Devices Features and Benefits B-15

4 Features and Benefits Locking Devices 50 Ampere Plugs and Connector Bodies: The Difference Is INSULRIP...and a hole Lot More Features and Benefits Padlockable shroud allows compliance to OSHA lockout tagout regulation 29 CFR Three-piece thermoplastic clamp assembly with stainless steel fast lead screws provides a more consistent, durable grip. Sealed cable entry keeps out moisture and dust. Stainless steel shroud cannot be distorted to mate with the wrong device. Box terminal with hex socket threaded slug is superior because it permits high clamping pressure on conductors without damaging strands. Heavy-duty design for heavy-duty applications. These Hubbell 50A Twist-Lock plugs and connector bodies are built to go where you need power...even in some of the harshest environments. On the outside, 50A plugs and connectors are made of Super tough nylon for better impact resistance. On the plug, the stainless steel shroud not only provides protection and durability, but safety as well. That s because the rigid construction cannot be distorted, thus minimizing the possibility of mating incorrect devices. Rynite is a registered trademark of E. I. Dupont. Super tough nylon housing offers better impact qualities than regular nylon. Housing assembly latch slotted to fit standard flat-blade screwdriver providing secure assembly and fast disassembly for wiring. Thermoplastic polyester interior provides heat resistance and impact strength. 6/6 nylon nose thermoplastic polyester terminal cover provides heat resistance in terminal area and impact strength of nose piece. One-piece grounding contact on 4-wire devices provides a more reliable grounding system for a safer device. On the inside are the kinds of features that separate Hubbell from all the rest. The cord grip has been designed with offset gripping jaws to securely hold the conductors not just the cord jacket. Hubbell s box terminals speed wiring and provide a superior termination. The plug s Rynite thermoplastic interior provides excellent heat resistance without compromising strength. In all, it s the combination of function and performance that Hubbell demands of all its products. And it s why we ll never add a feature that compromises performance. B-16

5 Safety-Shroud TIST-LOCK System Hubbell Leads the ay in Safety Again Features and Benefits Next-eneration Hubbell Twist-Lock: Here Today Introducing the next generation of the original: the Hubbell Twist-Lock. The Hubbell 20A and 30A Insulgrip Twist-Lock product line has been expanded to provide a complete family of Safety-Shroud Twist- Lock devices. In this all-new line, plug blades are protected by a fixed shroud that shields the blades from possible deformation and, even more importantly, virtually eliminates user contact with an energized partially connected plug. These products set an entirely new standard for improved safety and reliability, and are available in two distinct series: Safety-Shroud Twist-Lock atertight Safety-Shroud Twist-Lock The atertight Safety-Shroud Twist-Lock series has achieved a UL Type 4 rating, which is capable of withstanding the ingress of water under hose-down conditions. The entire outer shell is molded of a high impact UL 94V-0 rated engineered thermoplastic. A complete line of receptacles, plugs, connector bodies and inlets is available in the most commonly required configurations and ratings. The Safety-Shroud Twist-Lock series is intended for installation where watertightness is not a factor, but the added safety of the shrouded design is highly desirable. Here again, the Safety-Shroud is molded of an engineered thermoplastic for a very high level of impact resistance. In order to satisfy every application and every need, Hubbell offers this series in three different styles of receptacles surface, angle and semi-flush. hether the needs are maintenance and repair, renovation or new construction, there is a receptacle design to accommodate your needs. In addition, this series offers Safety-Shroud plugs and even a separate Safety-Shroud kit that can be used to convert the standard Insulgrip Twist-Lock plug into the shrouded design. To provide an additional measure of safety in the workplace, Hubbell goes beyond shrouding to provide mechanically interlocked enclosures, designed expressly for use with this series, that virtually prevent the connecting and disconnecting of equipment under load. It s another Hubbell first in the industry...the Mechanically Interlocked Twist-Lock. As always, it s extremely important to us that all our products achieve a high level of compatibility with your existing Twist-Lock device installations. First and foremost, the new Safety-Shroud series embodies the basic NEMA configurations. Therefore, all shrouded receptacles easily accept the standard NEMA locking plugs already in use in your facility. A complete compatibility chart appears on page B-21 to explain every circumstance. Hubbell Twist-Lock with our new Safety-Shroud: changes the standard of safety forever. atertight Mechanical Interlock For Safety- Shroud Twist-Lock Hubbell s CIRCUIT-LOCK enclosure line has been expanded to include a mechanical interlock designed for use with the new Safety- Shroud Twist-Lock line. The addition of this mechanical interlock will complete your Safety-Shroud Twist-Lock industrial wiring system. The mechanical interlock is a breakthrough in design and virtually eliminates the possibility of making or breaking the circuit under load. Back Boxes Hubbell manufactures an extensive line of back boxes for use with the new Safety Shroud Twist-Lock system. Each back box is designed to give the user the maximum amount of wiring room while achieving grounding to metallic conduit. Hubbell back boxes are available in non-metallic and cast metal versions. atertight Safety-Shroud Twist-Lock This Type 4 rated product line is offered in a complete family consisting of plugs, connector bodies, receptacles and inlets. Tough and tight, these products are unequaled in performance in even the most hostile applications. Safety-Shroud Twist-Lock here watertightness is not a factor but the added margin of safety from the Hubbell Safety-Shroud Twist-Lock is we offer a total product line for all applications. In addition to Safety-Shroud plugs, the new line includes nonwatertight receptacles in three styles angle, surface and semi-flush to satisfy every installation need. Locking Devices Introduction B-17

6 Features and Benefits Locking Devices atertight Safety-Shroud TIST-LOCK System Receptacles, Plugs, Connector Bodies and Flanged Inlets Features and Benefits Closure cap is included for environmental seal when device is not in use. One-piece, engineered thermoplastic housing is impact-resistant for heavyduty industrial environments. All screws are #10 multiple drive head. Catalog number and color-coded voltage rating are easily visible even when in use. Universal Neoprene Diaphragm Seal Seal accommodates a wide range of cord sizes from #16-3 Type SJ to #8-5 Type S, SO. Panel Or Box Mount Receptacles And Inlets High impact, thermoplastic housing for heavy-duty industrial environments. Catalog number and color-coded voltage rating are easily visible when in use. Stainless Steel 302/304, #10 multiple drive head mounting screws provide corrosion resistance. Mounting screw recesses minimize screwdriver slippage. Lockout/tagout hole on inlets allow compliance to OSHA regulation 29 CFR Neoprene closure cap provided with inlets for environmental seal when not in use. Accepts all mating NEMA locking plugs and most connector bodies, allowing interchangeability with existing devices. External keying provides quick mating of devices. Blades are recessed for protection against bending and breaking. Alignment arrows and lock and unlock symbols provide a visual indication that devices are properly connected. Cord grip screw recess minimizes screwdriver slippage. One-step automatic Neoprene sealing gland and engineered thermoplastic guard assure sealing when device is fully connected. Spring-Loaded Cover One-step push-to-close spring-loaded cover with latch allows for fast opening and closing of lift cover. Result: environmental sealing is assured. Safety-Shroud Virtually eliminates bent and broken plug blades, leading to longer equipment life. Extends life of mating receptacles by eliminating damage caused by insertion of bent blades. Extra protection for personnel by significantly reducing chance of inadvertent contact with blades when connecting or disconnecting energized receptacles and connector bodies. Reduces exposure to arcing when connecting or disconnecting plugs under load. Compliance with California Code of Regulations, Title 8, Article 51, subsection (b), which requires shrouding for devices exceeding 300 volts. Lockout/tagout hole allows compliance with OSHA regulation 29 CFR Sealing gland and thermoplastic guard assure sealing when fully connected. B-18

7 Safety-Shroud TIST-LOCK System Receptacles and Plugs Features and Benefits Impact resistant shroud made of engineered thermoplastic protects blades against bending or breaking. External keying on plug devices allows quick mating of devices. All screws are #10 multiple drive head. Semi-flush receptacle mounting provides lowest installed profile when plug is not in use with receptacle. This device is designed for installation on 2 gang boxes. Alignment arrows and lock and unlock symbols provide a visual indication that devices are properly connected. Lockout/tagout hole allows compliance with OSHA regulation 29 CFR Safety-Shroud Plug Features and Benefits Mates with most NEMA locking Extends life of mating receptacles by connector bodies. eliminating damage caused by Virtually eliminates bent and broken insertion of bent blades. plug blades. Complies with California Code of Provides protection for personnel by Regulation, which requires shrouding reducing chance of inadvertent contact for devices exceeding 300 volts. with blades when connecting or Lockout/tagout hole allows compliance disconnecting energized devices. to OSHA regulation 29 CFR Reduces exposure to arcing when Allows engagement with Mechanical connecting or disconnecting under Interlock Enclosure which virtually load. prevents make and break under load. Straight receptacle housing provides a low installed profile when plug is not in use with receptacle. This device is designed for installation on singlegang boxes. Receptacle Features and Benefits Internal keying on receptacles aligns Catalog number and color-coded blades for quick mating of devices. voltage rating are visible when in use. Accepts all NEMA locking plugs, All screws are #10 multiple drive head. allowing interchangeability with existing devices. Catalog number and color-coded voltage rating are visible even when in use. Engineered thermoplastic housing is impact and corrosion resistant, making it suitable for heavy-duty industrial environments. Angle receptacle housing provides low installed profile when plug is in use with receptacle. This device is designed for installation on single-gang boxes. Engineered thermoplastic housing is impact and corrosion-resistant, for use in heavy-duty industrial environments. Locking Devices Features and Benefits B-19

8 Features and Benefits Locking Devices Switched Safety Enclosures CIRCUIT-LOCK Unfused Safety-Shroud TIST-LOCK Mechanical Interlock Features and Benefits Lockable handle provides lockout protection for greater safety and compliance with OSHA lockout requirements. Heavy-duty interlock linkage prevents make and break under load. Horsepower rated switch. Heavy-duty internal frame bonds conduit and all grounds and has a DIN rail to accommodate the switch. Hubbell introduces the first mechanical interlock for Twist- Lock. This new, unfused mechanical interlock for watertight Safety-Shroud Twist- Lock integrates a watertight receptacle with a linked disconnect switch to provide a mechanically interlocked receptacle. This virtually eliminates the possibility of making or breaking the circuit Moveable feet may be used in horizontal or vertical position. while under load or making a casual or lazy connection. The switch cannot be turned ON until the plug is properly inserted and locked, and the plug cannot be removed until the switch is turned OFF. All these protective features are included in a compact Type 4 hose-directed water and corrosion resistant enclosure that allows for top, bottom or back feed options. The Angled 20 or 30 Amp Hubbell atertight Safety-Shroud Twist-Lock receptacle provides watertight, low profile and mechanical interlock capabilities. Enclosure back is designed for top, bottom or back feed options. Premolded conduit entry hole is offset to prevent water condensation from falling directly on to interior electrical components. Also speeds installation by making it easier to pull conductors. non-metallic enclosure is nonconductive, yet has an internal frame to assure ground continuity with metallic conduit. In addition, this interlock works with all Safety-Shroud Twist-Lock plugs. The new unfused mechanical interlock for watertight Safety-Shroud Twist- Lock can be locked out as a method of compliance with OSHA lockout/tagout regulations. B-20

9 TIST-LOCK System Compatibility and Environmental Protection atertight Safety-Shroud, Safety-Shroud and NEMA Devices Twist-Lock Plugs Twist-Lock Receptacles Switched Twist-Lock Enclosure PSJO IST OTN CAT. NO. SSFIT ISTI ERQ QQ FIT TIEH SALAKJ SKA OFF ON CAUTION: Saitiew ietioeta sitieb owtosntownf wthuil sothe othes ot istelsls tiesntofoenls. ATTENTION: Alsritwheta dithe otehl sothe toehs wopt thlslei toenll sl lsjtel oetyhenl iteh sithe ithelsl tihehhll. Twist-Lock Connector Bodies atertight Safety- Shroud Mechanical atertight atertight Interlock Switched Safety- Safety-Shroud Enclosure Safety-Shroud Enclosure NEMA Shroud NEMA atertight ES ES ES NO NO ES ES Safety- Type 4, Type 4, Type 1 Type 4, Type 1 Shroud Type 12 Type 12K Type 12 Safety- ES ES ES NO NO ES ES Shroud Type 1 Type 1 Type 1 Type 1 Type 1 NEMA ES NO ES ES ES ES ES Type 1 Type 1 Type 3R Type 1 Type 1 Type 1 Twist-Lock Inlets NEMA NA NA NA NA NA NO ES Type 1 atertight NA NA NA NA NA ES ES Safety- Type 4, Type 1 Shroud Type 12 Type 1 Indoor Type 3R Raintight Type 4 Hose-directed water and corrosion resistant Type 12 Dust tight, dripproof without knockouts Type 12K Dust tight, dripproof with knockouts ES Interchangeable NO Does not interchange NA Not Applicable Refer to section for full description of enclosure types. Locking Devices Compatibility and Environmental Protection Chart B-21

10 2P 3, 20A, 125V, 250V and 277V AC Locking Devices TIST-LOCK Devices 2 Pole, 3 ire rounding 20 Ampere, 125, 250 Volts and 277 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs 2.26" (57.4) 1.25" R. (31.8) 1.97" (50.0) 2.67" (67.8).98" (24.9) 1.25" R. (31.8) 1.70" (43.2) HBL2310 HBL " (51.8) HBL " (98.0) 2.88" (73.2) 2.75" (69.9) HBL " (73.2) 1.23" (31.2) 2.04" (51.8) HBL " 2.38" (39.6)(60.5)(83.3) 3.28" #6-32 TAP 2.09" (53.1) 2.09" (53.1) 1.97" (50.0) 2.26" (57.4) Single Flush Receptacles, Back and Side ired Black nylon face. HBL2310 HBL2320 HBL2330 Isolated ground, orange nylon face. I2310 I2320 Corrosion resistant, yellow nylon face. HBL23CM10 Insulgrip Connector Bodies Black and white nylon. HBL2313 HBL2323 HBL2333 Corrosion resistant, yellow nylon. HBL23CM13 HBL23CM23 Note: Cord clamp range (9-24). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2316 HBL2326 HBL2336 Insulgrip Plugs IP20 SUITABILIT Black and white nylon. HBL2311 HBL2321 HBL2331 Corrosion resistant, yellow nylon. HBL23CM11 HBL23CM21 Notes: Cord grip range (9-24). See page B-73 for Add-A-Shroud kit. NEMA L5-20R 20A 125V 1 HP Insulgrip Flanged Inlets Nylon casing, back wired. HBL2315 HBL2325 HBL2335 Notes: See pages B-68 and B-69 for accessories. See page B-63 for switched enclosure. For technical information see page B-83. HP ratings are AC only. Only receptacles and plugs are HP rated. IP20 SUITABILIT NEMA L5-20P 20A 125V 1 HP NEMA L6-20R 20A 250V NEMA L6-20P 20A 250V NEMA L7-20R 20A 277V AC NEMA L7-20P 20A 277V AC B-22

11 TIST-LOCK Devices 2 Pole, 3 ire rounding 20 Ampere, 125, 250 Volts and 277 Volts AC atertight Safety-Shroud TIST-LOCK System UL Listed, CSA Certified to Type 4, 4, & 12 atertight Safety-Shroud Receptacles, Back ired ray Valox housing & flange. HBL2310S HBL2320S HBL2330S Note: Receptacles only fit boxes listed on Page B-72. atertight Safety-Shroud Connector Bodies Black Valox housing, HBL2313S HBL2323S HBL2333S hite Valox clamps. atertight Safety-Shroud Plugs Black Valox housing, HBL2311S HBL2321S HBL2331S hite Valox clamps. atertight Safety-Shroud Flanged Inlets ray Valox housing and flange. HBL2315S HBL2325S HBL2335S Notes: Only receptacles and plugs 480V AC or less are HP rated. *Also suitable for 208V. HP ratings are AC only. Cord grip range for plugs and connector bodies (9 24), #16-3 Type SJ to #8-3 Type S, SO. For technical information see page B-84. CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock for Twist-Lock Receptacles Mechanical Interlock accommodates HBLMITL** 20A and 30A watertight safety-shroud receptacles. Note: **Not shown, see pages B-64 and B-65 for details. NEMA L5-20R 20A 125V 1 HP NEMA L5-20P 20A 125V 1 HP Valox is a registered trademark of eneral Electric Company. NEMA L6-20R 20A 250V * NEMA L6-20P* 20A 250V * IP66 SUITABILIT NEMA L7-20R 20A 277V AC NEMA L7-20P 20A 277V AC 2.56" (65.0) 2.78" (70.6) 2.69" (68.3) HBL2320S 4.38" (111.1) HBL2323S 4.50" (114.3) HBL2321S 2.28" (57.9) HBL2325S 1.50" (38.1) 1.63" (41.4) Locking Devices 2P 3, 20A, 125V, 250V and 277V AC B-23

12 2P 3, 20A, 125V, 250V and 277V AC Locking Devices TIST-LOCK Devices 2 Pole, 3 ire rounding 20 Ampere, 125, 250 Volts and 277 Volts AC Safety-Shroud TIST-LOCK System 2.26" (57.4) 2.04" (51.8) 5.12" (130.0) 2.88" (73.2) HBL2320AR 4.56" (115.8) 5.12" (130.0) HBL2320SR2 3.86" (98.0) 3.14" (79.8) HBL " (40.1) 2.84" (72.1) HBL2320SR.77" (19.6) 3.97" (100.8) HBL2321S 4.57" (116.1) 1.97" (50.0) 2.26" (57.4) Safety-Shroud Twist-Lock Receptacles, Back ired Angle housing one gang. HBL2310AR HBL2320AR HBL2330AR Surface mounting one gang. HBL2310SR HBL2320SR HBL2330SR Semi-flush two gang. HBL2310SR2 HBL2320SR2 HBL2330SR2 Notes: See page B-72 for box mounting application. Housing and flange, gray Valox. IP20 SUITABILIT Insulgrip Connector Bodies Black and white nylon. HBL2313 HBL2323 HBL2333 Note: Cord grip range (9-24). IP20 SUITABILIT Safety-Shroud Male Plugs NEMA L5-20R 20A 125V 1 HP Black and white nylon body, HBL2311S HBL2321S HBL2331S white Valox shroud. Note: Cord clamp range (9-24). Insulgrip Flanged Inlets Nylon casing, back wired. HBL2315 HBL2325 HBL2335 Note: Only receptacles and plugs 480V AC or less are HP rated. *Also suitable for 208V AC. HP ratings are AC only. For technical information, see page B-83. Valox is a registered trademark of eneral Electric Company. NEMA L5-20R 20A 125V NEMA L5-20P 20A 125V 1 HP NEMA L5-20P 20A 125V NEMA L6-20R 20A 250V * NEMA L6-20R 20A 250V NEMA L6-20P* 20A 250V * NEMA L6-20P 20A 250V NEMA L7-20R 20A 277V AC NEMA L7-20R 20A 277V AC NEMA L7-20P 20A 277V AC NEMA L7-20P 20A 277V AC B-24

13 TIST-LOCK Devices 2 Pole, 3 ire rounding 20 Ampere, 125, 250 Volts and 277 Volts AC VALISE Plugs and Connector Bodies IP20 SUITABILIT Valise Plugs Cord Dia. ellow nylon HBL2311V HBL2321V HBL2331V ( ) Corrosion resistant, HBL23CM11V yellow nylon. ( ) Black nylon HBL2311VBK HBL2321VBK HBL2331VBK ( ) Valise Connector Bodies NEMA L5-20P 20A 125V 1 HP Cord Dia. ellow nylon HBL2313V HBL2323V ( ) Black nylon HBL2313VBK HBL2323VBK HBL2333VBK ( ) Notes: Connector bodies are not HP rated. HP ratings are AC only. See page B-88 for technical information. eatherproof Accessories IP55** SUITABILIT ellow Seal-Tite elastomer triple seal cover for use with Valise HBL60CM31V* plugs when used in cord set and Valise connector bodies when used with flanged inlet. ellow Seal-Tite elastomer triple seal cover for use with HBL60CM32V* Valise connector bodies. Note: **hen installed and used properly with plug and connector body combinations. * Not UL Listed, CSA Certified NEMA L5-20R 20A 125V NEMA L6-20P 20A 250V NEMA L6-20R 20A 250V NEMA L7-20P 20A 277V AC NEMA L7-20R 20A 277V AC 1.78" (45.2) 1.78" (45.2) 2.50" (63.5) HBL2311V 2.60" (66.0) HBL2313V HBL60CM31V HBL60CM32V Locking Devices 2P 3, 20A, 125V, 250V and 277V AC B-25

14 2P 3, 20A, 347V AC, 480V AC and 600V AC Locking Devices TIST-LOCK Devices 2 Pole, 3 ire rounding 20 Ampere, 347, 480 and 600 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs 2.26" (57.4) 1.97" 50.0) 2.67" (67.8).98" (24.9) 1.70" (43.2) HBL " (98.0) HBL " (73.2) 2.04" (51.8) HBL2346 HBL " (73.2) 2.75" (69.9) 2.04" (51.8) HBL " (31.2) 1.56" 2.38" (39.6) (60.5) (83.3) 3.28" #6-32 TAP 2.09" (53.1) 1.25" R (31.8) 2.09" (53.1) 1.25" R (31.8) 1.97" (50.0) 2.26" (57.4) Single Flush Receptacles, Back and Side ired Isolated ground, orange nylon face. I2340 Insulgrip Connector Bodies Black and white nylon. HBL3723 HBL2343 HBL2353 Note: Cord clamp range (9-24). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL3726 HBL2346 HBL2356 Insulgrip Plugs NEMA L8-20R 20A 480V AC 3 HP Black and white nylon. HBL3721 HBL2341 HBL2351 Notes: Cord clamp range (9-24). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, back wired. HBL3725 HBL2345 HBL2355 Notes: Only receptacles and plugs up to 480V AC are HP rated. For technical information see page B-83. See pages B-68 and B-69 for accessories. See page B-63 for switched enclosure. HP ratings are AC only. NEMA L9-20R 20A 600V AC NEMA L24-20R 20A 347V AC Black nylon face. HBL3720 HBL2340 HBL2350 IP20 SUITABILIT IP20 SUITABILIT NEMA L8-20P NEMA L24-20P 20A 480V AC 20A 347V AC 3 HP NEMA L9-20P 20A 600V AC B-26

15 TIST-LOCK Devices 2 Pole, 3 ire rounding 30 Ampere, 125, 250 Volts and 277 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs Single Flush Receptacles, Back and Side ired Black nylon face. HBL2610 HBL2620 HBL2630 Isolated ground, orange nylon face. I2610 I2620 Corrosion resistant, yellow nylon face. HBL26CM10 Insulgrip Connector Bodies Black and white nylon. HBL2613 HBL2623 HBL2633 Heat stabilized, gray nylon, 220 F (104 C). HBL2613F HBL2623F Corrosion resistant, yellow nylon. HBL26CM13 HBL26CM23 Note: Cord clamp range (9-24). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2616 HBL2626 HBL2636 Heat stabilized, gray nylon, 220 F (104 C). HBL2616F HBL2626F Insulgrip Plugs IP20 SUITABILIT Black and white nylon. HBL2611 HBL2621 HBL2631 Heat stabilized, gray nylon, 220 F (104 C). HBL2611F HBL2621F Corrosion resistant, yellow nylon. HBL26CM11 HBL26CM21 Notes: Cord clamp range (9-24). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, back wired. HBL2615 HBL2625 HBL2635 Heat stabilized, gray nylon, 220 F (104 C). HBL2615F HBL2625F Notes: All HP ratings are AC only. Only receptacles and plugs are HP rated. For technical information see page B-83. For accessories see pages B-68 and B-69. See page B-63 for switched enclosure. NEMA L5-30R 30A 125V IP20 SUITABILIT NEMA L5-30P 30A 125V NEMA L6-30R 30A 250V NEMA L6-30P 30A 250V NEMA L7-30R 30A 277V AC 3 HP NEMA L7-20P 20A 277V AC 2.26" (57.4) 1.97" (50.0) 2.67" (67.8).98" (24.9) 1.70" (43.2) HBL " (98.0) HBL " (73.2) 2.04" (51.8) HBL2626 HBL " (73.2) 2.04" (51.8) 2.75" (69.9) HBL " (31.2) 1.56" 2.38" (39.6)(60.5)(83.3) 3.28" #6-32 TAP 2.09" (53.1) 2.09" (53.1) 1.25" R (31.8) 2.26" (57.4) 1.25" R (31.8) 1.97" (50.0) Locking Devices 2P 3, 30A, 125V, 250V and 277V AC B-27

16 2P 3, 30A, 125V, 250V Locking Devices 2.56" (65.0) 2.78" (70.6) TIST-LOCK Devices 2 Pole, 3 ire rounding 30 Ampere, 125 and 250 Volts atertight Safety-Shroud TIST-LOCK System 2.69" (68.3) HBL2610S 4.38" (111.1) HBL2613S HBL2611S 2.28" (57.9) HBL2615S 1.50" (38.1) 4.50" (114.3) 1.63" (41.4) UL Listed, CSA Certified to Type 4, 4, & 12 atertight Safety-Shroud Receptacles, Back ired ray Valox housing and flange. HBL2610S HBL2620S Note: Receptacles only fit boxes listed on page B-72. atertight Safety-Shroud Connector Bodies Black Valox housing, white Valox clamps. HBL2613S HBL2623S atertight Safety-Shroud Plugs Black Valox housing, white Valox clamps. HBL2611S HBL2621S atertight Safety-Shroud Flanged Inlets ray Valox housing and flange. HBL2615S HBL2625S Notes: Only receptacles and plugs 480V AC or less are HP rated. *Also suitable for 208V. HP ratings are AC only. Cord grip range for plugs and connector bodies (9-24). #16-3 Type SJ to #8-3 Type S, SO. For technical information see page B-84. CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock for Twist-Lock Receptacles Mechanical Interlock accommodates 30A HBLMITL** watertight Safety-Shroud receptacles. Note: **Not shown, see pages B-64 and B-65. Valox is a registered trademark of eneral Electric Company. NEMA L5-30R 30A 125V NEMA L5-30P 30A 125V IP66 SUITABILIT NEMA L6-30R 30A 250V * NEMA L6-30P 30A 250V * B-28

17 TIST-LOCK Devices 2 Pole, 3 ire rounding 30 Ampere, 125 and 250 Volts Safety-Shroud TIST-LOCK System Safety-Shroud Twist-Lock Receptacles, Back ired Angle housing one gang. HBL2610AR HBL2620AR Surface mounting one gang. HBL2610SR HBL2620SR Semi-flush two gang. HBL2610SR2 HBL2620SR2 Notes: See page B-72 for box mounting application. Housing and flange, gray Valox. Insulgrip Connector Bodies IP20 SUITABILIT Black and white nylon. HBL2613 HBL2623 Note: Cord clamp range (9-24). Safety-Shroud Male Plug IP20 SUITABILIT Black and white nylon body, HBL2611S HBL2621S white Valox shroud. Note: Cord clamp range (9-24). Insulgrip Flanged Inlets Nylon casing, back wired. HBL2615 HBL2625 Notes: Only receptacles and plugs 480V AC or less are HP rated. *Also suitable for 208V. HP ratings are AC only. For technical information see page B-83. Valox is a registered trademark of eneral Electric Company. NEMA L5-30R 30A 125V NEMA L5-30R 30A 125V NEMA L5-30P 30A 125V NEMA L5-30P 30A 125V NEMA L6-30R 30A 250V * NEMA L6-30R 30A 250V NEMA L6-30P 30A 250V * NEMA L6-30P 30A 250V 2.26" (57.4) 2.04" (51.8) 5.12" (130.0) 4.56" (115.8) 2.88" (73.2) HBL2620AR 5.12" (130.0) HBL2620SR2 3.86" (98.0) HBL " (100.8) 3.14" (79.8) 1.58" (40.1) 2.84" (72.1) HBL2620SR HBL2621S.77" (19.6) 4.57" (116.1) 1.97" (50.0) 2.26" (57.4) Locking Devices 2P 3, 30A, 125V, 250V B-29

18 2P 3, 30A, 125V, 250V AC Locking Devices TIST-LOCK Devices 2 Pole, 3 ire rounding 30 Ampere, 125 and 250 Volts VALISE Plugs and Connector Bodies 1.78" (45.2) 1.78" (45.2) 2.50" (63.5) HBL2611V 2.60" (66.0) HBL2613V HBL60CM31V HBL60CM32V Valise Plugs IP20 SUITABILIT Cord Dia. ellow nylon HBL2611V HBL2621V ( ) Corrosion resistant, yellow nylon HBL26CM11V ( ) Black nylon HBL2611VBK HBL2621VBK ( ) Valise Connector Bodies IP20 SUITABILIT NEMA L5-30P 30A 125V Cord Dia. ellow nylon HBL2613V HBL2623V ( ) Corrosion resistant, yellow nylon HBL26CM13V ( ) Black nylon HBL2613VBK HBL2623VBK ( ) Notes: Connector bodies are not HP rated. HP ratings are AC only. See page B-88 for technical information. eatherproof Accessories IP55** SUITABILIT ellow Seal-Tite elastomer triple seal cover for use with Valise HBL60CM31V* plugs when used in cord set and Valise connector bodies when used with flanged inlet. ellow Seal-Tite elastomer triple seal cover for use with Valise HBL60CM32V* connector bodies. Note: **hen installed and used properly with plug and connector body combinations. * Not UL Listed, CSA Certified. NEMA L5-30R 30A 125V NEMA L6-30P 30A 250V NEMA L6-30R 30A 250V B-30

19 TIST-LOCK Devices 2 Pole, 3 ire rounding 30 Ampere, 480 and 600 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs Single Flush Receptacles, Back and Side ired Black nylon face. HBL2640 HBL2650 Insulgrip Connector Bodies Black and white nylon. HBL2643 HBL2653 Note: Cord clamp range ( ). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2646 HBL2656 Insulgrip Plugs IP20 SUITABILIT Black and white nylon. HBL2641 HBL2651 Notes: Cord clamp range ( ). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, back wired. HBL2645 HBL2655 Notes: Only receptacles and plugs up to 480V AC are HP rated. For technical information see page B-83. HP ratings are AC only. For accessories see pages B-68 and B-69. See page B-63 for switched enclosure. IP20 SUITABILIT NEMA L8-30R 30A 480V AC 5 HP NEMA L8-30P 30A 480V AC 5 HP NEMA L9-30R 30A 600V AC NEMA L9-30P 30A 600V AC 2.67" (67.8).98" (24.9) 2.26" (57.4) 1.97" (50.0) 1.70" (43.2) HBL " (98.0) HBL " (73.2) 2.04" (51.8) HBL2656 HBL " (73.2) 2.04" (51.8) 2.75" (69.9) HBL " 2.38" (39.6) (60.5) (83.3) 3.28" #6-32 TAP 1.23" (31.2) 2.09" (53.1) 2.09" (53.1) 1.97" (50.0) 1.25" R (31.8) 2.26" (57.4) 1.25" R (31.8) Locking Devices 2P 3, 30A, 480V AC and 600V AC B-31

20 2P 3, 50A, 125V, 250V and 480V AC Locking Devices TIST-LOCK Devices 2 Pole, 3 ire rounding 50 Ampere, 125, 250 Volts and 480 Volts AC Receptacles, Connector Bodies, Plugs and Flanged Inlets 2.59" (65.8) 2.59" (65.8) 1.03" (26.2) 1.50"R (38.0) 2.13" (54.1) 2.44" (62) CS " (161.0) CS8264C 6.38" (162.0) CS8265C 3.50" (88.9) " (55.1) CS8275 HBL7774O 2.69" 3.28" (68.3) (83.3) 2.62" (66.5) Receptacles 50A 125V 50A 250V Black melamine. CS6370 CS8269 CS8469 Connector Bodies IP20 SUITABILIT Nylon housing, Rynite interior. CS6360C CS8264C CS8464C Note: Cord clamp range ( ). Plugs 50A 125V 50A 250V 50A 480V AC IP20 SUITABILIT Nylon housing, Rynite interior. CS6361C CS8265C CS8465C Note: Cord clamp range ( ). Flanged Inlets inc plated steel casing. CS6377 CS8275 CS8475 thermoplastic interior. Note: See page B-16 for product features. Accessories IP55** SUITABILIT eatherproof Boots Seal-Tite triple seal black elastomeric cover for plugs when used HBL7716C* in a cord set and connector bodies when used with flanged inlets. Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C* when used with cord sets. Note: Boots shown on page B-74. eatherproof Receptacle Cover Plates ray thermoplastic, corrosion resistant. ellow thermoplastic, corrosion resistant. Receptacle all Plate & Box Cover Stainless steel 302/304, smooth. alvanized Steel fits 4 square, 4 11/16 or 2 gang box Closure Plug for 50A Inlets Black closure plug. HBL7774O HBL77CM74O S750 HBL50SC HBL4892* Notes: For additional accessories see page B-74. For technical information see page B-85. **hen installed and used properly with plug and connector body combinations. Not CSA Certified. * Not UL Listed, CSA Certified. Rynite is a registered trademark of E. I. Dupont. IP44 SUITABILIT 50A 480V AC B-32

21 TIST-LOCK Devices 2 Pole, 3 ire rounding 50 Ampere, 250 Volts DC and 600 Volts AC Receptacle, Connector Body, Plug and Flanged Inlets Receptacle Black melamine. Connector Body Nylon housing, Rynite interior. Note: Cord clamp range ( ). Plug IP20 SUITABILIT Nylon housing, Rynite interior. Note: Cord clamp range ( ). Flanged Inlets inc plated steel casing, thermoplastic int. inc plated steel casing, thermoplastic int. with lift cover. Accessories eatherproof Boots IP55** SUITABILIT Seal-Tite triple seal black elastomeric cover for plugs when used in a cord set and connector bodies when used with flanged inlets. Seal-Tite triple seal black elastomeric cover for connector bodies when used with cord sets. eatherproof Receptacle Cover Plates ray thermoplastic, corrosion resistant. ellow thermoplastic, corrosion resistant. Receptacle all Plate & Box Cover Stainless steel 302/304, smooth. alvanized Steel fits 4 square, 4 11/16 or 2 gang box Closure Plug for 50A Inlets IP20 SUITABILIT IP44 SUITABILIT HBL3771 HBL3762C HBL3763C HBL3777 HBL3767 HBL7716C HBL7717C HBL7774O HBL77CM74O S750 HBL50SC Black closure plug. HBL4892 Notes: For additional accessories see page B-74. For technical information see page B-85. **IP55 suitability when installed and used properly with plug and connector body combinations. * Not UL Listed. Rynite is a registered trademark of E. I. Dupont. 50A 250V DC 50A 600V AC 50A 250V DC 50A 600V AC. 19" 1.03" (26.2) 1.50"R (38.0) 2.13" (54.1) 2.44" (62) HBL " (161.0) HBL3762C 6.38" (162.0) HBL3763C 3.50" (88.9) " (55.1) HBL " (88.9) 2.63" (66.8) 1.50"R (38.0) HBL " (68.3) (83.3) 3.28" 2.62" (66.5) 2 (55.6).63" (16.0) 2.59" (65.8) 2.59" (65.8) Locking Devices 2P 3, 50A, 250V DC and 600V AC B-33

22 3P 3, 15A, 125/250V Locking Devices TIST-LOCK Devices 3 Pole, 3 ire, Non-rounding 15 Ampere, 125/250 Volts Midget TIST-LOCK Flanged Receptacles and Plugs 1 (30.2) 1.17" (29.7).16" (4.1) 1.17" (29.7) 1.00" (25.4).16" (4.1) 1.12" (28.4) HBL7487N 2.06" (52.3) 1.75" (44.5) 1 (30.2) HBL " (52.3) 1.75" (44.5) 1.17" (29.7) HBL " (40.9) HBL7485V 2.00" (50.8) 1.59" (40.4) 2.06" (52.3) 1.75" (44.5) HBL7485 HBL " (24.6) 1.25" (31.8) 1.69" (42.9).15" (3.8) 1.13" (28.7) Flanged Receptacles Exposed terminals, black nylon flange. HBL7487N Exposed terminals, stainless steel flange, HBL7487 Covered terminals, stainless steel flange, HBL7489 accepts cord.500 (12.7) in diameter. Male Plugs IP20 SUITABILIT Cord Dia. Valise plug, black nylon, with HBL7485V insulation displacement terminals, ( ) multiple drive screws. Black nylon body, phenolic base, HBL7485 multiple drive screw terminals, ( ) cord grip. Same as above, except angle HBL7432 cord grip. ( ) eatherproof Boot Seal-Tite cover, black elastomer, for use with a HBL7485V or HBL7485 plug when used with a HBL7484V or HBL7484 connector body when used with a flanged inlet. HBL7495V Notes: These devices are not interchangeable with any other devices in this catalog. All male ground pins are solid and all female ground contacts have hollow sleeves. **hen installed and used properly with plug and connector body combinations. * Not UL Listed. HBL7495V IP55** SUITABILIT NEMA ML-3R 15A 125/250V NEMA ML-3P 15A 125/250V B-34

23 TIST-LOCK Devices 3 Pole, 3 ire, Non-rounding 15 Ampere, 125/250 Volts Midget TIST-LOCK Devices, Flanged Inlets and Connector Bodies Flanged Inlets Exposed terminals, black nylon flange. HBL7486N Exposed terminals, stainless steel flange. HBL7486 Connector Bodies IP20 SUITABILIT Cord Dia. Valise type, black nylon, with HBL7484V insulation displacement terminals, ( ) multiple drive screws. Black nylon body, phenolic base, HBL7484 multiple drive screws, cord grip. ( ) Same as above, except for angle HBL7433 cord grip. ( ) eatherproof Accessories IP55** SUITABILIT Seal-Tite cover, black elastomer, for use with a HBL7484V or HBL7484 connector body and a combination of HBL7485V or HBL7485 plug and HBL7495V cover. Closure cover for use with HBL7486 or HBL7486N. HBL7440V* HBL4889* Notes: These devices are not interchangeable with any other devices in this catalog. All male ground pins are solid and all female ground contacts have hollow sleeves. **IP55 suitability when installed and used properly with plug and connector body combinations. * Not UL Listed. NEMA ML-3R 15A 125/250V HBL4889 NEMA ML-3P 15A 125/250V 1.17" (29.7) 1.00" (25.4).16" (4.1) 1.28" (32.5) 2.06" (52.3) 1.75" (44.5) 1.27" (32.3) HBL7486N 2.06" (52.3) 1.75" (44.5) 1.22" (31) HBL " (50.0) HBL7484V 2.42" (61.5) 2.02" (51.3) HBL " (42.9) 1.17" (29.7) HBL7433 HBL7440V 1.00" (25.4).15" (3.8) 1 (30.2) 1.13" (28.7) Locking Devices 3P 3, 15A, 125/250V B-35

24 3P 3, 20A and 30A, 125/250V Locking Devices TIST-LOCK Devices 3 Pole, 3 ire Non-rounding 20 and 30 Ampere, 125/250 Volts Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs 2.26" (57.4) 2.20" (57.2) #6-32 TAP 1.97" (50.0) 2.50" (63.5) #6-32 TAP 1.39" (35.2) HBL7310B 1.71" (43.1) HBL " (98.0) HBL7314C 2.88" (73.2) 2.04" (51.8) HBL3326C HBL9965C 2.88" (73.2) 2.75" (69.9) 2.04" (51.8) HBL3325C 1.11" (28.2) 1.38" (34.9) (60.5) 2.38" 3.61" (91.6) 1.28" (32.5) 1.22" (31.0) 1.57" (39.8)(60.5) 2.38" (91.6) 3.61" 2.09" (53.1) 2.09" (53.1).97" (24.6) 1.25" R (31.8) 1.97" (50.0) 2.26" (57.4) 1.25" R (31.8) For Replacement Use Only Single Flush Receptacles Black urea face, back wired. HBL7310B HBL3330 Insulgrip Connector Bodies Black and white nylon. HBL7314C HBL3333C Corrosion resistant, yellow nylon. HBL73CM14C Note: Cord grip range (9-24). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL3326C HBL3335C Insulgrip Plugs IP20 SUITABILIT IP20 SUITABILIT Non-NEMA 20A 125/250V UL Listed Black and white nylon. HBL9965C HBL3331C Corrosion resistant, yellow nylon. HBL99CM65C Note: Cord grip range (9-24). Insulgrip Flanged Inlets Nylon casing, back wired. HBL3325C HBL3334C Note: See pages B-68 and B-69 for accessories. CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade configuration (design) is already in a circuit having a rating differing from the rating of this device. Non-NEMA 20A 125/250V UL Listed Non-NEMA 30A 125/250V UL Listed Non-NEMA 30A 125/250V UL Listed B-36

25 TIST-LOCK Devices 3 Pole, 4 ire rounding 20 Ampere, 125/250 Volts, 3Ø 250 and 3Ø 480 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs Single Flush Receptacles, Back and Side ired Black nylon face. HBL2410 HBL2420 HBL2430 Isolated ground, orange nylon face. I2410 I2420 Insulgrip Connector Bodies Black and white nylon. HBL2413 HBL2423 HBL2433 Corrosion resistant, yellow nylon. HBL24CM13 HBL24CM23 HBL24CM33 Note: Cord clamp range (9-29). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2416 HBL2426 HBL2436 Insulgrip Plugs IP20 SUITABILIT Black and white nylon. HBL2411 HBL2421 HBL2431 Corrosion resistant, yellow nylon. HBL24CM11 HBL24CM21 HBL24CM31 Notes: Cord clamp range (9-29). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, back wired. HBL2415 HBL2425 HBL2435 Notes: All HP ratings are AC only. HP ratings not in parentheses are phase to phase. HP rating in parentheses is phase to neutral. Only receptacles and plugs are HP rated. See pages B-70 and B-71 for accessories. For technical information see page B-83. See page B-63 for switched enclosure. NEMA L14-20R 20A 125/250V 2 (1) HP IP20 SUITABILIT NEMA L14-20P 20A 125/250V AC 2 (1) HP NEMA L15-20R 20A 3Ø 250V AC 3 HP NEMA L15-20P 20A 3Ø 250V AC 3 HP NEMA L16-20R 20A 3Ø 480V AC 5 HP NEMA L16-20P 20A 3Ø 480V AC 5 HP (59.2 ) 2.67" (67.8) #6-32 TAP 1.70" (43.2) HBL " (98.0) HBL " (77.7) 2.23" (56.6) HBL2416 HBL " (77.7) 2.75" (69.9) 2.23" (56.6) HBL " (39.6) (60.5) 2.38" (83.3) 3.28" 1.23" (31.2).98" (24.9) 2.27" (57.7) 2.27" (57.7) 1.34" R (34.0) (59.2) 1.34" R (34.0) Locking Devices 3P 4, 20A, 125/250V, 3Ø 250 and 3Ø 480V AC B-37

26 3P 4, 20A, 125/250V, 3Ø 250 and 3Ø 480V AC Locking Devices TIST-LOCK Devices 3 Pole, 4 ire rounding 20 Ampere, 125/250 Volts, 3Ø 250 and 3Ø 480 Volts AC atertight Safety-Shroud TIST-LOCK System 2.75" (69.9) 2.94" (74.7) 4.38" (111.1) HBL2423S HBL2421S 2.91" (73.9) HBL2420S 2.44" (62.0) HBL2425S 4.50" (114.3) 1.75" (44.5) 1.81" (46.0) UL Listed, CSA Certified to Type 4, 4, & 12 atertight Safety-Shroud Twist-Lock Receptacles ray Valox housing and flange. HBL2410S HBL2420S HBL2430S Note: Receptacles only fit boxes listed on page B-72. atertight Safety-Shroud Connector Bodies Black Valox housing, HBL2413S HBL2423S HBL2433S white Valox clamps. atertight Safety-Shroud Plugs Black Valox housing, HBL2411S HBL2421S HBL2431S white Valox clamp. atertight Safety-Shroud Inlets ray Valox housing and flange. HBL2415S HBL2425S HBL2435S Notes: Only receptacles and plugs 480V AC or less are HP rated. All HP ratings are AC only. HP rating in parentheses is phase to neutral. Cord grip range for plugs and connector bodies (9-29), #16-4 Type SJ to #8-4 Type S, SO. For technical information see page B-84. CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock for Twist-Lock Receptacles Mechanical Interlock accommodates HBLMITL* 20A and 30A watertight Safety-Shroud receptacles. Note: *Not shown, see pages B-64 and B-65 for complete details. Valox is a registered trademark of eneral Electric Company. NEMA L14-20R 20A 125/250V 2 (1) HP NEMA L14-20P 20A 125/250V 2 (1) HP NEMA L15-20R 20A 3Ø 250V AC 3 HP NEMA L15-20P 20A 3Ø 250V AC 3 HP IP66 SUITABILIT NEMA L16-20R 20A 3Ø 480V AC 5 HP NEMA L16-20P 20A 3Ø 480V AC 5 HP B-38

27 TIST-LOCK Devices 3 Pole, 4 ire rounding 20 Ampere, 125/250 Volts, 3Ø 250 and 3Ø 480 Volts AC Safety-Shroud TIST-LOCK System Safety-Shroud Twist-Lock Receptacles ray Valox Angle housing, one gang. HBL2410AR HBL2420AR HBL2430AR ray Valox Surface mounting, one gang. HBL2410SR HBL2420SR HBL2430SR ray Valox Semi-flush, two gang. HBL2410SR2 HBL2420SR2 HBL2430SR2 Note: See page B-72 for box mounting application. Housing and flange gray Valox. IP20 SUITABILIT Insulgrip Connector Bodies Black and white nylon. HBL2413 HBL2423 HBL2433 Note: Cord clamp range (9-29). IP20 SUITABILIT Safety-Shroud Twist-Lock Plugs Black and white nylon body, HBL2411S HBL2421S HBL2431S white Valox shroud. Note: Cord clamp range (9-29). Insulgrip Flanged Inlets Nylon casing, back wired. HBL2415 HBL2425 HBL2435 Notes: Only receptacles and plugs 480V AC or less are HP rated. All HP ratings are AC only. For technical information, see page B-83. HP rating in parentheses is phase to neutral. Valox is a registered trademark of eneral Electric Company. NEMA L14-20R 20A 125/250V 2 (1) HP NEMA L14-20P 20A 125/250V 2 (1) HP NEMA L14-20R 20A 125/250V NEMA L14-20P 20A 125/250V NEMA L15-20R 20A 3Ø 250V AC 3 HP NEMA L15-20P 20A 3Ø 250V AC 3 HP NEMA L15-20R 20A 3Ø 250V AC NEMA L15-20P 20A 3Ø 250V AC NEMA L16-20R 20A 3Ø 480V AC 5 HP NEMA L16-20P 20A 3Ø 480V AC 5 HP NEMA L16-20R 20A 3Ø 480V AC NEMA L16-20P 20A 3Ø 480V AC (59.2) 5.12" (130.0) 4.56" (115.8) 2.85" (72.4) HBL2420AR 5.12" (130.0) 3.86" (98.0) HBL " (104.6) HBL2421S 3.14" (79.8) 1.71" (43.4) 2.84" (72.1) HBL2420SR.77" (19.6) HBL2420SR2 4.57" (116.1) (59.2) Locking Devices 3P 4, 20A, 125/250V, 3Ø 250 and 3Ø 480V AC B-39

28 3P 4, 30A, 125/250V, 3Ø 250V AC Locking Devices TIST-LOCK Devices 3 Pole, 4 ire rounding 30 Ampere, 125/250 Volts and 3Ø 250 Volts Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs (59.2) 2.67" (67.8) #6-32 TAP 1.70" (43.2) HBL " (98.0) HBL " (77.7) 2.23" (56.6) HBL2716 HBL " (77.7) 2.75" (69.9) 2.23" (56.6) HBL " (39.6) (60.5) 2.38" (83.3) 3.28" 1.23" (31.2).98" (24.9) 2.27" (57.7) 2.27" (57.7) 1.34" R (34.0) (59.2) 1.34" R (34.0) Single Flush Receptacles, Back and Side ired Black nylon face. HBL2710 HBL2720 Isolated ground, orange nylon face. I2710 I2720 Insulgrip Connector Bodies Black and white nylon. HBL2713 HBL2723 Corrosion resistant, yellow nylon. HBL27CM13 HBL27CM23 Note: Cord clamp range (9-29). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2716 HBL2726 Insulgrip Plugs IP20 SUITABILIT NEMA L14-30R 30A 125/250V 2 (2) HP NEMA L14-30P 30A 125/250V 2 (2) HP Black and white nylon. HBL2711 HBL2721 Corrosion resistant, yellow nylon. HBL27CM11 HBL27CM21 Notes: Cord clamp range (9-29). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, back wired. HBL2715 HBL2725 Notes: HP ratings not in parentheses are phase to phase. HP rating in parentheses is phase to neutral. Only receptacles and plugs are HP rated. See pages B-70 and B-71 for accessories. For technical information see page B-83. See page B-63 for switched enclosure. IP20 SUITABILIT NEMA L15-30R 30A 3Ø 250V AC 3 HP NEMA L15-30P 30A 3Ø 250V AC 3 HP B-40

29 TIST-LOCK Devices 3 Pole, 4 ire rounding 30 Ampere, 125/250 Volts and 3Ø 250 Volts AC atertight Safety-Shroud TIST-LOCK System atertight Safety-Shroud Twist-Lock Receptacles UL Listed, CSA Certified to Type 4, 4, & 12 ray Valox housing and flange. HBL2710S HBL2720S Note: Receptacles only fit boxes listed on page B-72. atertight Safety-Shroud Twist-Lock Connector Bodies Black Valox housing, white Valox clamps. HBL2713S HBL2723S atertight Safety-Shroud Twist-Lock Plugs Black Valox housing, white Valox clamps. HBL2711S HBL2721S atertight Safety-Shroud Twist-Lock Inlets ray Valox housing and flange. HBL2715S HBL2725S Notes: Only receptacles and plugs 480V AC or less are HP rated. All HP ratings are AC only. HP rating in parentheses is phase to neutral. Cord grip range for plugs and connector bodies (9-29), #16-4 Type SJ to #8-4 Type S, SO. For technical information see page B-84. CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock for Twist-Lock Receptacles Mechanical Interlock accommodates HBLMITL* 20A and 30A watertight Safety-Shroud receptacles. Note: *Not shown, see pages B-64 and B-65 for complete details. Valox is a registered trademark of eneral Electric Company. NEMA L14-30R 30A 125/250V 2 (2) HP NEMA L14-30P 30A 125/250V 2 (2) HP IP66 SUITABILIT NEMA L15-30R 30A 3Ø 250V AC 3 HP NEMA L15-30P 30A 3Ø 250V AC 3 HP 2.75" (69.9) 2.94" (74.7) 2.91" (73.9) HBL2710S 4.38" (111.1) HBL2713S HBL2711S 2.44" (62.0) HBL2715S 4.50" (114.3) 1.75" (44.5) 1.81" (46.0) Locking Devices 3P 4, 30A, 125/250V, 3Ø 250V AC B-41

30 3P 4, 30A, 125/250V, 3Ø 250V AC Locking Devices TIST-LOCK Devices 3 Pole, 4 ire rounding 30 Ampere, 125/250 Volts and 3Ø 250 Volts AC Safety-Shroud TIST-LOCK System (59.3) 5.12" (130.0) 2.88" (73.2) HBL2710AR 4.56" (115.8) 3.14" (79.8) 5.12" (130.0) HBL2710SR2 3.86" (98.0) HBL " (104.6) HBL2711S 1.71" (43.4) 2.84" (72.1) HBL2710SR 4.57" (116.1).77" (19.6) (59.3) Safety-Shroud Twist-Lock Receptacles F Angle housing one gang. HBL2710AR HBL2720AR Surface mounting one gang. HBL2710SR HBL2720SR Semi-flush two gang. HBL2710SR2 HBL2720SR2 Notes: See page B-72 for box mounting application. Housing and flange, gray Valox. IP20 SUITABILIT Insulgrip Connector Bodies Black and white nylon. HBL2713 HBL2723 Note: Cord clamp range (9-29). IP20 SUITABILIT Safety-Shroud Twist-Lock Plugs Black and white nylon body, white Valox shroud. HBL2711S HBL2721S Note: Cord clamp range (9-29). Insulgrip Flanged Inlet Nylon casing, back wired. HBL2715 HBL2725 Notes: Only receptacles and plugs 480V AC or less are HP rated. All HP ratings are AC only. HP rating in parentheses is phase to neutral. For technical information, see page B-83. Valox is a registered trademark of eneral Electric Company. S Fed.Spec. NEMA L14-30R 30A 125/250V 2 (2) HP NEMA L14-30R 30A 125/250V NEMA L14-30P 30A 125/250V 2 (2) HP NEMA L14-30P 30A 125/250V NEMA L15-30R 30A 3Ø 250V AC 3 HP NEMA L15-30R 30A 3Ø 250V AC NEMA L15-30P 30A 3Ø 250V AC 3 HP NEMA L15-30P 30A 3Ø 250V AC B-42

31 TIST-LOCK Devices 3 Pole, 4 ire rounding 30 Ampere, 3Ø 480 and 3Ø 600 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs F Single Flush Receptacles, Back and Side ired Black nylon face. HBL2730 HBL2740 Not Fed Spec. Insulgrip Connector Bodies IP20 SUITABILIT Black and white nylon. HBL2733 HBL2743 Corrosion resistant, yellow nylon. HBL27CM33 HBL27CM43 Note: Cord clamp range (9-29). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2736 HBL2746 Insulgrip Plugs S Fed.Spec. IP20 SUITABILIT Black and white nylon. HBL2731 HBL2741 Corrosion resistant, yellow nylon. HBL27CM31 HBL27CM41 Notes: Cord clamp range (9-29). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, backwired. HBL2735 HBL2745 Notes: HP ratings listed above are AC only. See pages B-70 and B-71 for accessories. Only receptacles and plugs are HP rated and up to 480V AC only. For technical information see page B-83. See page B-63 for a switched enclosure. NEMA L16-30R 30A 3Ø 480V AC 10 HP NEMA L16-30P 30A 3Ø 480V AC 10 HP NEMA L17-30R 30A 3Ø 600V AC NEMA L17-30P 30A 3Ø 600V AC 2.67" (67.8) #6-32 TAP (59.3) 1.70" (43.2) 1.23" (31.2) HBL " (98.0) HBL2733 HBL " (69.9) HBL " (39.6) (60.5) 2.38" (83.3) 3.28".98" (24.9) (59.2) Locking Devices 3P 4, 30A, 3Ø 480 and 3Ø 600V AC B-43

32 3P 4, 30A, 3Ø 480 and 3Ø 600V AC Locking Devices TIST-LOCK Devices 3 Pole, 4 ire rounding 30 Ampere, 3Ø 480 and 3Ø 600 Volts AC atertight Safety-Shroud TIST-LOCK System 2.75" (69.9) 2.94" (74.7) 2.91" (73.9) HBL2730S 4.38" (111.1) HBL2733S 4.50" (114.3) HBL2731S 2.44" (62.0) HBL2735S 1.75" (44.5) 1.81" (46.0) UL Listed, CSA Certified to Type 4, 4, & 12 atertight Safety-Shroud Twist-Lock Receptacles ray Valox housing and flange. HBL2730S HBL2740S Note: Receptacles only fit boxes listed on page B-72. atertight Safety-Shroud Twist-Lock Connector Bodies Black Valox housing, white Valox clamps. HBL2733S HBL2743S atertight Safety-Shroud Twist-Lock Plugs Black Valox housing, white Valox clamps. HBL2731S HBL2741S atertight Safety-Shroud Twist-Lock Inlets ray Valox housing and flange. HBL2735S HBL2745S Notes: Only receptacles and plugs 480V AC or less are HP rated. All HP ratings are AC only. Cord grip range for plugs and connector bodies (9-29), #16-4 Type SJ to #8-4 Type S, SO. For technical information see page B-84. CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock for Twist-Lock Receptacles Mechanical Interlock accommodates HBLMITL* 20A and 30A watertight Safety-Shroud receptacles. Note: *See pages B-64 and B-65 for complete details. Valox is a registered trademark of eneral Electric Company. NEMA L16-30R 30A 3Ø 480V AC 10 HP NEMA L16-30P 30A 3Ø 480V AC 10 HP IP66 SUITABILIT NEMA L17-30R 30A 3Ø 600V AC NEMA L17-30P 30A 3Ø 600V AC B-44

33 TIST-LOCK Devices 3 Pole, 4 ire rounding 30 Ampere, 3Ø 480 and 3Ø 600 Volts AC Safety-Shroud TIST-LOCK System Safety-Shroud Twist-Lock Receptacles Angle housing one gang. HBL2730AR HBL2740AR Surface mounting one gang. HBL2730SR HBL2740SR Semi-flush two gang. HBL2730SR2 HBL2740SR2 Notes: See page B-72 for box mounting application. Housing and flange, gray Valox. IP20 SUITABILIT Insulgrip Connector Bodies Black and white nylon. HBL2733 HBL2743 Note: Cord clamp range (9-29). IP20 SUITABILIT Safety-Shroud Twist-Lock Plugs Black and white nylon body, HBL2731S HBL2741S white Valox shroud. Note: Cord clamp range (9-29). Insulgrip Flanged Inlets Nylon casing, back wired. HBL2735 HBL2745 Notes: Only receptacles and plugs 480V AC or less are HP rated. All HP ratings are AC only. For technical information, see page B-83. Valox is a registered trademark of eneral Electric Company. NEMA L16-30R 30A 3Ø 480V AC 10 HP NEMA L16-30R 30A 3Ø 480V AC NEMA L16-30P 30A 3Ø 480V AC 10 HP NEMA L16-30P 30A 3Ø 480V AC NEMA L17-30P 30A 3Ø 600V AC NEMA L17-30R 30A 3Ø 600V AC NEMA L17-30R 30A 3Ø 600V AC NEMA L17-30P 30A 3Ø 600V AC (59.3) 5.12" (130.0) 4.56" (115.8) 2.88" (73.2) HBL2730AR 5.12" (130.0) HBL2730SR2 3.86" (98.0) 3.14" (79.8) HBL " (104.6) HBL2731S 1.71" (43.4) 2.84" (72.1) HBL2730SR 4.57" (116.1).77" (19.6) (59.3) Locking Devices 3P 4, 30A, 3Ø 480 and 3Ø 600V AC B-45

34 3P 4, 50A, 125/250V, 3Ø 250 and 3Ø 480V AC Locking Devices TIST-LOCK Devices 3 Pole, 4 ire rounding 50 Ampere, 125/250 Volts, 3Ø 250 and 3Ø 480V AC Receptacles, Connector Bodies, Plugs and Flanged Inlets 2.59" (65.8) 2.59" (65.8) 1.50"R (38.0) 2.13" (54.1) 1.03" (26.2) 2.44" (62.0) CS " (161.0) CS6364C 6.38" (162.0) CS6365C 3.50" (88.9) " (55.1) CS6375 HBL7774O 2.69" 3.28" (68.3) (83.3) Receptacles Black melamine. CS6369 CS8369 CS " (66.5) Connector Bodies IP20 SUITABILIT Nylon cover, Rynite interior. CS6364C CS8364C CS8164C Note: Cord clamp range ( ). Plugs IP20 SUITABILIT Nylon cover, Rynite interior. CS6365C CS8365C CS8165C Note: Cord clamp range ( ). Flanged Inlets inc plated steel casing, Rynite interior. CS6375*** CS8375 CS8175 Note: ***See page V-12 for weatherproof inlet. Accessories eatherproof Boots IP55** SUITABILIT Seal-Tite triple seal black elastomeric cover for plugs when used HBL7716C* in a cord set and connector bodies when used with flanged inlets. Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C* when used with cord sets. Note: Boots shown on page B-74. eatherproof Receptacle Cover Plates ray thermoplastic, corrosion resistant. ellow thermoplastic, corrosion resistant. Receptacle all Plate & Box Cover Stainless steel 302/304, smooth. alvanized Steel fits 4 square, 4 11/16 or 2 gang box Closure Plug for 50A Inlets HBL7774O HBL77CM74O S750 HBL50SC Black closure plug. HBL4892* Notes: For additional accessories see page B-74. For technical information see page B-85. **hen installed and used properly with plug and connector body combination. * Not UL Listed, CSA Certified. Rynite is a registered trademark of E. I. Dupont 50A 125/250V 50A 125/250V 50A 3Ø 250V AC 50A 3Ø 250V AC 50A 3Ø 480V AC 50A 3Ø 480V AC B-46

35 TIST-LOCK Devices 3 Pole, 4 ire rounding 50 Ampere, 600 Volts AC, 250 Volts DC Receptacles, Connector Bodies, Plugs and Flanged Inlets Important Note: Catalog numbers HBL7379, HBL7764C, HBL7765C, HBL7958, HBL7968 are for replacement use only. See other singly rated 50A Twist-Lock devices in this section. HBL3700 series Twist-Lock devices do not interchange with any other devices in this section. Receptacles Black melamine. HBL3769 HBL7379 Connector Bodies IP20 SUITABILIT Nylon cover, Rynite interior. HBL3764C HBL7764C Note: Cord clamp range ( ). Plugs IP20 SUITABILIT Nylon cover, Rynite interior. HBL3765C HBL7765C Note: Cord clamp range ( ). Flanged Inlets inc plated steel casing, with lift cover. HBL3768 HBL7968 inc plated steel casing, without lift cover. HBL3775 HBL7958 Accessories eatherproof Boots IP55* SUITABILIT Seal-Tite triple seal black elastomeric cover for plugs when used HBL7716C** * in a cord set and connector bodies when used with flanged inlets. Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C** * when used with cord sets. eatherproof Receptacle Cover Plates ray thermoplastic, corrosion resistant. ellow thermoplastic, corrosion resistant. Receptacle all Plate & Box Cover Stainless steel 302/304, smooth. alvanized Steel fits 4 square, 4 11/16 or 2 gang box Closure Plug for 50A Inlets IP44* SUITABILIT HBL7774O HBL77CM74O S750 HBL50SC Black closure plug. HBL4892* Notes: For additional accessories see page B-74. For technical information see page B-85. **hen installed and used properly with plug and connector body combination. Rynite is a registered trademark of E. I. Dupont. *Not UL Listed, Not CSA Certified. 50A 600V AC 50A 250V DC 50A 600V AC 50A 250V DC 50A 600V AC 50A 250V DC 50A 600V AC 50A 250V DC 2.69" (68.3) 1.03" (26.2) 2.59" (65.8) 2.59" (65.8) 1.50"R (38.0) 2.13" (54.1) 2.44" (62.0) HBL " (161.0) HBL3764C 6.38" (162.0) HBL3765C " (88.9) HBL " (88.9) " (55.1) HBL " (66.8) 1.50"R (38.0) 2.62" (66.5) 3.28" (83.3) 2 (55.6) Locking Devices 3P 4, 50A, 250V DC and 600V AC B-47

36 4P 4, 20A, 3Ø 120/208, 277/480 and 347/600V AC Locking Devices TIST-LOCK Devices 4 Pole, 4 ire Non-rounding 20 Ampere, 3Ø 120/208, 277/480 and 347/600 Volts AC Receptacles, INSULRIP Connector Bodies, Plugs and Flanged Devices 2.67" (67.8) (59.2).98" (24.9) 1.70" (43.2) HBL2440 HBL " (77.7) 2.23" (56.6) HBL2446 HBL " (77.7) 2.23" (56.6) 3.86" (98.0) HBL " (31.2) 1.56" (39.6) 2.38" (60.5) 3.28" (83.3) #6-32 TAP 2.75" (69.9) 2.27" (57.7) 2.27" (57.7) 1.34" R (34.0) 1.34" R (34.0) (59.2) F S Fed.Spec. Single Flush Receptacles, Back and Side ired Black nylon face. HBL2440 HBL2450 HBL2460 Not Fed Spec. Insulgrip Connector Bodies IP20 SUITABILIT Black and white nylon. HBL2443 HBL2453 HBL2463 Note: Cord clamp range (9-29). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2446 HBL2456 HBL2466 Insulgrip Plugs IP20 SUITABILIT Black and white nylon. HBL2441 HBL2451 HBL2461 Notes: Cord clamp range (9-29). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, back wired. HBL2445 HBL2455 HBL2465 Accessories all Plates IP55** SUITABILIT Stainless steel 302/304, smooth, single-gang. Brass, smooth, single-gang. Black, smooth nylon, single-gang. eatherproof Boots IP55* SUITABILIT Seal-Tite triple seal cover for plug when used on a cord set or when used with flush receptacles or connector body when used with flanged inlets. Black elastomer. Same as above except yellow. Seal-Tite triple seal cover for connector body, when used on interconnecting cord sets. Black elastomer. NEMA L18-20P 20A 3Ø 120/208V AC UL Listed NEMA L19-20P 20A 3Ø 277/480V AC UL Listed 5 HP NEMA L20-20P 20A 3Ø 347/600V AC UL Listed S720 B720 P720B HBL6035* HBL60CM35* HBL6036* Same as above except yellow. HBL60CM36* Notes: See pages B-70 and B-71 for accessories. HP ratings are for receptacles and plugs only and up to 480V AC only. HP ratings are AC only. **hen installed and used properly with plug and connector body combinations. For technical information see page B-83. ** Not UL Listed. NEMA L18-20R 20A 3Ø 120/208V AC UL Listed NEMA L19-20R 20A 3Ø 277/480V AC UL Listed 5 HP NEMA L20-20R 20A 3Ø 347/600V AC UL Listed B-48

37 TIST-LOCK Devices 4 Pole, 4 ire Non-rounding 30 Ampere, 3Ø 120/208, 277/480 and 347/600 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs F S Fed.Spec. Single Flush Receptacles, Back and Side ired Black nylon face. HBL2750 HBL2760 HBL2770 Not Fed Spec. Insulgrip Connector Bodies IP20 SUITABILIT Black and white nylon. HBL2753 HBL2763 HBL2773 Note: Cord clamp range (9-29). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2756 HBL2766 HBL2776 Insulgrip Plugs IP20 SUITABILIT Black and white nylon. HBL2751 HBL2761 HBL2771 Note: Cord clamp range (9-29). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, back wired. HBL2755 HBL2765 HBL2775 Notes: Horsepower ratings are for receptacles and plugs only and up to 480V AC only. See pages B-70 and B-71 for accessories. For technical information see page B-83. NEMA L18-30R 30A 3Ø 120/208V AC UL Listed 3 HP NEMA L18-30P 30A 3Ø 120/208V AC UL Listed 3 HP NEMA L19-30R 30A 3Ø 277/480V AC UL Listed 10 HP NEMA L19-30P 30A 3Ø 277/480V AC UL Listed 10 HP NEMA L20-30R 30A 3Ø 347/600V AC UL Listed NEMA L20-30P 30A 3Ø 347/600V AC UL Listed (59.2) 2.67" (67.8) 1.70" (43.2) HBL " (98.0) HBL " (77.7) 2.23" (56.6) HBL2756 HBL " (77.7) 2.75" (69.9) 2.23" (56.6) HBL " (31.2) 1.56" 2.38" (39.6) (60.5) (83.3) 3.28" #6-32 TAP.98" (24.9) 2.27" (57.7) 2.27" (57.7) 1.34" R (34.0) 1.34" R (34.0) (59.2) Locking Devices 4P 4, 30A, 3Ø 120/208, 277/480 and 347/600V AC B-49

38 4P 4, 20 and 30A, 3Ø 120/208V AC Locking Devices TIST-LOCK Devices 4 Pole, 4 ire Non-rounding 20 and 30 Ampere, 3Ø 120/208 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs 2.50" (63.5) (59.2) 2.69" (68.3) 1.71" (43.4) #6-32 TAP 1.28" (32.0) HBL7410B 1.36" (34.6) #6-32 TAP 1.13" (28.7) HBL " (43.4) 3.86" (98.0) HBL7413C 3.06" (77.7) 1.05" (26.7) 2.23" (56.6) HBL7409C 2.75" (69.9) HBL7411C 1.57" (39.8) 2.38" (60.5) 3.61" (91.7) 1.57" (39.8) (83.3) 3.28" (91.7) 3.61" 1.34" R (34.0) 2.27" (57.7) (59.2) Receptacles Black urea, back wired. HBL7410B HBL3430 Mounted on a 4 (101.6) round metal cover. HBL7417B Not Fed Spec Insulgrip Connector Bodies IP20 SUITABILIT Black and white nylon. HBL7413C HBL3433C Note: Cord grip range for devices (9-29). Insulgrip Flanged Receptacle Nylon casing, back wired. HBL7409C Insulgrip Plugs IP20 SUITABILIT Black and white nylon. HBL7411C HBL3431C Notes: Cord grip range for devices (9-29). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlet Nylon casing, back wired. HBL7408C Notes: See pages B-70 and B-71 for accessories. For technical information on Insulgrip plugs, connector bodies and flanged devices see page B-83. For Replacement Use Only 3.06" (77.7) 2.23" (56.6) HBL7408C 2.27" (57.7) 1.34" R (34.0) Non-NEMA 20A 3Ø 120/208V AC UL Listed Non-NEMA 20A 3Ø 120/208V AC UL Listed Non-NEMA 30A 3Ø 120/208V AC UL Listed Non-NEMA 30A 3Ø 120/208V AC UL Listed CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade configuration (design) is already in a circuit having a rating differing from the rating of this device. B-50

39 TIST-LOCK Devices 4 Pole, 5 ire rounding 20 Ampere, 3Ø 120/208, 277/480 and 347/600 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs Single Flush Receptacles, Back and Side ired Black nylon face. HBL2510 HBL2520* HBL2530* Isolated ground, orange nylon face. I2510 *Not Fed Spec Insulgrip Connector Bodies IP20 SUITABILIT Black and white nylon. HBL2513 HBL2523 HBL2533 Corrosion resistant, yellow nylon. HBL25CM13 Note: Cord grip range (9-29). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2516 HBL2526 HBL2536 Insulgrip Plugs IP20 SUITABILIT F S Fed.Spec. Black and white nylon. HBL2511 HBL2521 HBL2531 Corrosion resistant, yellow nylon. HBL25CM11 Note: Cord grip range (9-29). Insulgrip Flanged Inlets Nylon casing, back wired. HBL2515 HBL2525 HBL2535 Notes: Only receptacles and plugs 480V AC or less are HP rated. HP ratings for receptacles and plugs only. All HP rating are AC only. See pages B-70 and B-71 for accessories. See page B-83 for technical data. See page B-63 for switched enclosure. NEMA L21-20R 20A 3Ø 120/208V AC NEMA L21-20P 20A 3Ø 120/208V AC NEMA L22-20R 20A 3Ø 277/480V AC 5 HP NEMA L22-20P 20A 3Ø 277/480V AC 5 HP NEMA L23-20R 20A 3Ø 347/600V AC NEMA L23-20P 20A 3Ø 347/600V AC (59.3) 2.67" (67.8).98" (24.9) 1.70" (43.2) HBL " (98.0) HBL " (77.7) 2.23" (56.6) HBL " (69.8) HBL " (77.7) 2.23" (56.6) HBL " 2.38" (39.6) (60.5) (83.3) 3.28" #6-32 TAP 1.23" (31.2) 2.27" (57.7) 2.27" (57.7) 1.34" R (34.0) (59.2) 1.34" R (34.0) Locking Devices 4P 5, 20A, 3Ø 120/208, 277/480 and 347/600V AC B-51

40 4P 5, 20A, 3Ø 120/208V AC Locking Devices TIST-LOCK Devices 4 Pole, 5 ire rounding 20 Ampere, 3Ø 120/208 Volts AC atertight Safety-Shroud TIST-LOCK System 2.75" (69.9) 2.94" (74.7) 2.91" (73.9) HBL2510S HBL2513S HBL2511S 2.44" (62.0) HBL2515S 4.38" (111.1) 4.50" (114.3) 1.81" (46.0) 1.75" (44.5) F UL Listed, CSA Certified to Type 4, 4, & 12 atertight Safety-Shroud Receptacle, Back ired ray Valox housing and flange. Note: Receptacles only fit boxes listed on page B-72. atertight Safety-Shroud Connector Body Black Valox housing, white Valox clamps. atertight Safety-Shroud Plug S Fed.Spec. Black Valox housing, white Valox clamps. atertight Safety-Shroud Flanged Inlet ray Valox housing and flange. Notes: Cord grip range for plugs and connector bodies (9-29), #16-5 Type S, SO to #8-5 Type S, SO. For technical information see page B-84. CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock for Twist-Lock Receptacles Mechanical Interlock accommodates 20A and 30A watertight safety shroud receptacles. Note: *See pages B-64 and B-65 for complete details. Valox is a registered trademark of eneral Electric Company. NEMA L21-20R 20A 3Ø 120/208V AC HBL2510S HBL2513S NEMA L21-20P 20A 3Ø 120/208V AC HBL2511S HBL2515S HBLMITL* IP66 SUITABILIT B-52

41 TIST-LOCK Devices 4 Pole, 5 ire rounding 20 Ampere, 3Ø 120/208 Volts AC Safety-Shroud TIST-LOCK System F Safety-Shroud Twist-Lock Receptacles Angle housing one gang. Surface mounting one gang. S Fed.Spec. Semi-flush two gang. Notes: See page B-72 for box mounting application. Housing and flange gray Valox. Insulgrip Connector Body Black and white nylon. Note: Cord clamp range (9-29). IP20 SUITABILIT Safety-Shroud Twist-Lock Plug Black and white nylon body, hite Valox shroud. Note: Cord clamp range (9-29). IP20 SUITABILIT Insulgrip Flanged Inlet Nylon casing, back wired. Notes: Only receptacle and plugs 480V AC or less are HP rated. All HP ratings are AC only. For technical information, see page B-83. HBL2510AR HBL2510SR HBL2510SR2 HBL2513 HBL2511S NEMA L21-20P 20A 3Ø 120/208V AC NEMA L21-20R 20A 3Ø 120/208V AC NEMA L21-20R 20A 3Ø 120/208V AC NEMA L21-20P 20A 3Ø 120/208V AC HBL2515 (59.3) 4.56" (115.8) 5.12" (130.0) 3.14" (79.8) 2.88" (73.2) HBL2510AR 2.84" (72.1) HBL2510SR 5.12" (130.0) 3.86" (98.0) HBL " (104.6) 1.71" (43.4) HBL2510SR2 HBL2511S 4.57" (116.1).77" (19.6) (59.3) Locking Devices 4P 5, 20A, 3Ø 120/208V AC Valox is a registered trademark of eneral Electric Company. B-53

42 4P 5, 30A, 3Ø 120/208, 277/480 and 347/600V AC Locking Devices TIST-LOCK Devices 4 Pole, 5 ire rounding 30 Ampere, 3Ø 120/208, 277/480 and 347/600 Volts AC Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs (59.3) 2.67" (67.8) #6-32 TAP HBL " (43.2) 3.86" (98.0) HBL " (77.7) 2.23" (56.6) HBL2816 HBL " (77.7) 2.23" (56.6) HBL " (39.6) (60.5) 2.38" (83.3) 3.28" 2.75" (69.9) 1.23" (31.2).98" (24.9) 2.27" (57.7) 2.27" (57.2) 1.34" R (34.0) 1.34" R (34.0) (59.2) F Single Flush Receptacles, Back and Side ired Black nylon face. HBL2810 HBL2820 HBL2830 Isolated ground, orange nylon face. I2810 Insulgrip Connector Bodies IP20 SUITABILIT Black and white nylon. HBL2813 HBL2823 HBL2833 Corrosion resistant, yellow nylon. HBL28CM13 Note: Cord grip range (9-29). Insulgrip Flanged Receptacles Nylon casing, back wired. HBL2816 HBL2826 HBL2836 Insulgrip Plugs IP20 SUITABILIT S Fed.Spec. NEMA L22-30P 30A 3Ø 277/480V AC 10 HP NEMA L23-30P 30A 3Ø 347/600V AC Black and white nylon. HBL2811 HBL2821 HBL2831 Corrosion resistant, yellow nylon. HBL28CM11 Notes: rip range (9-29). See page B-73 for Add-A-Shroud kit. Insulgrip Flanged Inlets Nylon casing, back wired. HBL2815 HBL2825 HBL2835 Notes: Only receptacles and plugs 480V AC or less are HP rated. HP rating are AC only. See pages B-70 and B-71 for accessories. For technical information see page B-83. See page B-63 for a switched enclosure. NEMA L21-30R 30A 3Ø 120/208V AC 3 HP NEMA L21-30P 30A 3Ø 120/208V AC 3 HP NEMA L22-30R 30A 3Ø 277/480V AC 10 HP NEMA L23-30R 30A 3Ø 347/600V AC B-54

43 TIST-LOCK Devices 4 Pole, 5 ire 30 Ampere, 3Ø 120/208 Volts AC atertight Safety-Shroud Twist-Lock System F UL Listed, CSA Certified to Type 4, 4, & 12K atertight Safety-Shroud Twist-Lock Receptacle ray Valox housing and flange. Note: Receptacles only fit boxes listed on page B-72. atertight Safety-Shroud Connector Body Black Valox housing, white Valox clamps. atertight Safety-Shroud Plug S Fed.Spec. Black Valox housing, white Valox clamps. atertight Safety-Shroud Flanged Inlet ray Valox housing and flange. Notes: Only receptacles and plugs 480V AC or less are HP rated. HP ratings are AC only. Cord grip range for plugs and connector bodies (9-29), #16-5 Type S, SO to #8-5 Type S, SO. For technical information see page B-84. CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock for Twist-Lock Receptacles Mechanical Interlock accommodates 20A and 30A watertight Safety-Shroud receptacles. Note: *Not shown, see pages B-64 and B-65 for complete details. Valox is a registered trademark of eneral Electric Company. HBL2810S HBL2813S NEMA L21-30R 30A 3Ø 120/208V AC 3 HP NEMA L21-30P 30A 3Ø 120/208V AC 3 HP HBL2811S HBL2815S HBLMITL* IP66 SUITABILIT 2.75" (69.9) 2.94" (74.7) 2.91" (73.9) HBL2810S 4.38" (111.1) HBL2813S HBL2811S 2.44" (62.0) HBL2815S 4.50" (114.3) 1.75" (44.5) 1.81" (46.0) Locking Devices 4P 5, 30A, 3Ø 120/208V AC B-55

44 4P 5, 30A, 3Ø 120/208V AC Locking Devices TIST-LOCK Devices 4 Pole, 5 ire rounding 30 Ampere, 3Ø 120/208 Volts AC Safety-Shroud TIST-LOCK System (59.3) 5.12" (130.0) 2.88" (73.2) HBL2810AR 4.56" (115.8) 3.14" (79.8) 5.12" (130.0) HBL2810SR2 3.86" (98.0) HBL " (43.4) 2.84" (72.1) HBL2810SR 4.12" (104.6) HBL2811S 4.57" (116.1).77" (19.6) (59.3) F S Fed.Spec. Safety-Shroud Twist-Lock Receptacles Angle housing one gang. Surface mounting one gang. Semi-flush two gang. Notes: See page B-72 for box mounting application. Housing and flange, gray Valox. Insulgrip Connector Body Black and white nylon. Note: Cord clamp range (9-29). IP20 SUITABILIT Safety-Shroud Twist-Lock Plug Black and white nylon body, white Valox shroud. Note: Cord clamp range (9-29). Insulgrip Flanged Inlet Nylon casing, back wired. IP20 SUITABILIT Notes: Only receptacles and plugs 480V AC or less are HP rated. All HP ratings are AC only. For technical information, see page B-83. Valox is a registered trademark of eneral Electric Company. HBL2810AR HBL2810SR HBL2810SR2 HBL2813 HBL2811S NEMA L21-30P 30A 3Ø 120/208V AC 3 HP NEMA L21-30R 30A 3Ø 120/208V AC NEMA L21-30R 30A 3Ø 120/208V AC 3 HP NEMA L21-30P 30A 3Ø 120/208V AC HBL2815 B-56

45 TIST-LOCK Devices 4 Pole, 5 ire rounding 20 Ampere, 250 Volts, 10 Ampere, 600 Volts AC Receptacle, INSULRIP Plug and Connector Body Receptacle Black urea, back wired. HBL3520 Insulgrip Plug IP20 SUITABILIT Black and white nylon. HBL3521C Insulgrip Connector Body IP20 SUITABILIT Black and white nylon. HBL3523C Insulgrip Flanged Inlet Nylon casing, back wired. HBL3525C Insulgrip Flanged Receptacle For Replacement Use Only Nylon casing, back wired. HBL3524C Notes: Cord grip range for plug and connector body (9-29). See pages B-70 and B-71 for accessories. For technical information on Insulgrip plug and connector body see page B-83. CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade configuration (design) is already in a circuit having a rating differing from the rating of this device. R Non-NEMA 20A 250V 10A 600V AC R Non-NEMA 20A 250V 10A 600V AC 3.61" 2.38" 1.57" (91.7) (60.5) (39.8) (59.2) #6-32 TAP " (43.4) HBL " (69.9) HBL3521C 3.86" (98.0) HBL3523C 3.06" (77.7) " (56.6) HBL3525C 3.06" (77.7) " (56.6) HBL3524C 2.27" (57.7) 2.27" (57.7) 2.50" (63.5) (59.2) 1.34" R (34.0) 1.34" R (34.0) Locking Devices 4P 5, 20A, 250V, 10A 600V AC B-57

46 4P 5, Variload Devices Locking Devices TIST-LOCK Devices 4 Pole 5 ire rounding 30 Ampere, 250 Volts; 30 Ampere, 600 Volts AC and 20 Ampere, 3Ø 120/208 Volts AC 400Hz VARILOAD TIST-LOCK Receptacles, Plugs, Connector Bodies and Flanged Inlets 3.28" (83.3) (60.5) 2.38" (43.7) 1.72" 2.13" (54.1).91" (23.1) #6-32 TAP 1.72" (43.7) HBL " (47.2) HBL " (73.4) HBL " (25.9) 2.13" (54.1).91" (23.1) 2.69" (68.3) 1.27" (32.3) 1.84" (46.7) In many large plants and laboratories the number of circuits of different ratings and frequency is greater than the number of blade configurations available in conventional wiring devices. Prior to NEMA configuration standardization the solution was Variload Twist-Lock devices with four non-interchangeable center pin and slot configurations that can be designated to different circuits. 30A, 250V AC/DC 30A, 600V AC Center Pin Connector Flanged Configuration Receptacles Plugs Bodies Inlets 20A 120/208V 3Ø, 400 Hz Accessories Plates Brass, single-gang. Stainless steel, single-gang. eatherproof Boots HBL45105 HBL45115 HBL45135 HBL45205 HBL45215 HBL45235 HBL45305 HBL45315 HBL45335 HBL45905 HBL45915 HBL45935 HBL45985CL IP55** SUITABILIT Seal-Tite black elastomer for Variload plugs. B725 S725 HBL6027* Seal-Tite, black elastomer for Variload connector bodies. HBL6028* Note: **hen installed and used properly with plug and connector body combinations. * Not UL Listed. CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade configuration (design) is already in a circuit having a rating differing from the rating of this device. B-58

47 Not UL Listed, TIST-LOCK Devices 3 Pole, 3 ire and 2 Pole 3 ire 10 Ampere, 250 Volts, 15 Ampere 125 Volts Receptacles, INSULRIP Connector Bodies, Flanged Devices and Plugs For Replacement Use Only Not rounded rounded Receptacles Not UL listed Not UL listed Duplex, black RTP*. HBL7580 HBL7580 Single, black phenolic. HBL7582 HBL7582 Connector Bodies IP20 SUITABILIT Insulgrip connector, black and white nylon, HBL7565C multiple drive screws. Insulgrip connector, yellow and white nylon, HBL7565C multiple drive screws. Black phenolic. HBL7555 HBL7555 Notes: Cord grip range ( ). HBL7555 cord grip range ( ). Flanged Receptacles Stainless steel casing. HBL7557 HBL7557 Insulgrip Plugs IP20 SUITABILIT 3 Pole 3 ire Not rounded Not UL listed Black and white nylon, multiple drive screws. HBL7567C ellow and white nylon, multiple drive screws. HBL7567C Note: Cord grip range ( ). Flanged Inlets Stainless steel casing. HBL7556 HBL7556 Notes: See pages B-66 and B-67 for accessories. For technical information on Insulgrip connector bodies and plugs see page B-83. The devices shown on this page are not listed by Underwriters Laboratories Inc. and are for replacement use only in existing installations. *RTP is an abbreviation for reinforced thermoplastic. CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade configuration (design) is already in a circuit having a rating differing from the rating of this device. CU CU 2 Pole 3 ire CU CU rounded Not UL listed R 1.53" (38.9) 3.28" (83.3).16"(4.1).16"(4.1) Dia. 1.70" (43.2) HBL " (70.6) HBL7565C 2.31" (58.7) 1.94" (49.3) 1.50" (38.1) HBL " (48.5) HBL7567C 2.31" (58.7) 1.94" (49.3) 1.50" (38.1) HBL " (69.5) 1.75" (44.4) 1.34" (34.0) 1.53" (38.9) 1.41" (35.8) 1.75" (44.4) 1.13" (28.7) Locking Devices Not UL Listed Devices 3P 3, 10A, 250V, 15A, 125V B-59

48 Not UL Listed 2P 3, 20 and 30A, 250V Locking Devices Not UL Listed TIST-LOCK Devices 2 Pole, 3 ire rounding 20 and 30 Ampere, 250 Volts Receptacles, INSULRIP Connector Bodies and Plugs #6-32 TAP 2.26" (57.4) 2.50" (63.5) 1.97" (50.0) #6-32 TAP 2.38" 3.28" (60.5) 1.38" (83.3) (34.9) 1.71" (43.1) 1.28" (32.5) HBL " (32.6) HBL7310B 3.86" (98.0) HBL7314CB 2.75" (69.9) 1.05" (26.7) 1.22" (31.0) HBL9965CB 2.20" 3.61" (55.9) (91.6) 1.57" (39.8)(60.5) 2.38" (91.6) 3.61".97" (24.6) 1.97" (50.0) 2.26" (57.4) For Replacement Use Only Single Flush Receptacles Black urea, back wired. HBL7310B HBL3330 Insulgrip Connector Bodies Black and white nylon. Insulgrip Plugs IP20 SUITABILIT IP20 SUITABILIT 20A 250V Non-NEMA Not UL Listed HBL7314CB HBL3333C 20A 250V Non-NEMA Not UL Listed CU 30A 250V Non NEMA Not UL listed Black and white nylon. HBL9965CB HBL3331C Notes: Cord grip range (9-24). See pages B-68 and B-69 for accessories. For technical information on Insulgrip connector bodies and plugs see page B-83. The devices shown on this page are not listed by Underwriters Laboratories Inc. and are for replacement use only in existing installations. R CU 30A 250V Non NEMA Not UL listed CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade configuration (design) is already in a circuit having a rating differing from the rating of this device. CU R R CU R B-60

49 Not UL Listed TIST-LOCK Devices 3 Pole, 4 ire 20 and 30 Ampere, 250 Volts AC Receptacles, INSULRIP Connector Bodies and Plugs For Replacement Use Only Single Flush Receptacles Black phenolic, back and side wired. HBL7410B HBL3430 Insulgrip Connector Bodies IP20 SUITABILIT Black and white nylon. HBL7413CB HBL3433CB Insulgrip Plugs IP20 SUITABILIT Black and white nylon. HBL7411CB HBL3431CB Notes: Cord grip range (9-29). See pages B-70 and B-71 for accessories. For technical information on Insulgrip connector bodies and plugs see page B-83. The devices shown on this page are not listed by Underwriters Laboratories Inc. and are for replacement use only in existing installations. 20A 250V AC Non-NEMA Not UL Listed R 20A 250V AC Non-NEMA Not UL Listed CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade configuration (design) is already in a circuit having a rating differing from the rating of this device. R 30A 250V AC Non-NEMA Not UL Listed R R 30A 250V AC Non-NEMA Not UL Listed 1.57" (39.8) 2.50" (63.5) (59.2) HBL7410B 1.36" (34.5) 1.71" (43.4) 1.28" (32.6) 1.05" (26.7) 1.71" (43.4) 2.50" 2.38" (63.5) (60.5)(91.6) 3.61" #6-32 TAP #6-32 TAP 1.13" (28.7) HBL " (98.0) 1.57" (39.8) (60.5) 2.38" (83.3) 3.28" HBL7413CB 2.75" (69.9) HBL7411CB (59.2) Locking Devices Not UL Listed 3P 4, 20 & 30A, 250V AC B-61