Vacuum generation Compact ejectors
|
|
|
- Ezra Chase
- 5 years ago
- Views:
Transcription
1 Energy saving function by integrated pressure control saves up to 5 % of energy q = Vacuum connection z = Compressed air connection Product notes s = Exhaust outlet Check valve with wire mesh to keep out impurities > Handling of dense and porous workpieces > Within the supply pressure of 4-8 bar ( psi), the ejector works at 3.5 bar (5.76 psi) with same high performance > Electronic vacuum and blow-off control for short cycle times > Manual adjustment of the blow-off flow rate using a setscrew > Low noise emissions as, starting from 4 bar (58 psi), outlet pressure is independent of inlet pressure > Open silencer further reduces the noise level and is completely maintenance-free Notes > Ejector with digital vacuum switch 2.21 for process monitoring (Index "-VA") > The vacuum switch can be freely adjusted after mounting the ejector Ordering notes > Index EKP: With control valves > Index EKPP: Without control valves > The performance data are identical for the two series > The optional check valve maintains the vacuum in cases of compressed air failure for a certain period of time to prevent sudden dropping of the workpiece > On request, ejectors are also available normally (current free) open (NO): In case of power failure, compressed air line remains open and workpiece is held by the gripper Technical data Item no. EKP.6x12 EKP.6x15 EKP.6x2 EKP.6x25 EKP.6x3 EKP.9x12 EKP.9x15 EKP.9x2 EKP.9x25 EKP.9x3 Nozzle diameter [mm] Feed pressure [bar (psi)] Internal working pressure [bar (psi)] 3.5 (5.8) 3.5 (5.8) 3.5 (5.8) 3.5 (5.8) 3.5 (5.8) 3.5 (5.8) 3.5 (5.8) 3.5 (5.8) 3.5 (5.8) 3.5 (5.8) Final vacuum [%] Suction power [Nl/min] Air consumption [Nl/min] Protection class IP65 IP65 IP65 IP65 IP65 IP65 IP65 IP65 IP65 IP65 Operating principle NC NC NC NC NC NC NC NC NC NC Control voltage Current consumption for vacuum and blow-off feature [ma] 3 (.7 W) 3 (.7 W) 3 (.7 W) 3 (.7 W) 3 (.7 W) 3 (.7 W) 3 (.7 W) 3 (.7 W) 3 (.7 W) 3 (.7 W) FIPA GmbH Headquarters Germany Phone: info@fipa.com
2 Technical data Item no. EKP.6x12 EKP.6x15 EKP.6x2 EKP.6x25 EKP.6x3 EKP.9x12 EKP.9x15 EKP.9x2 EKP.9x25 EKP.9x3 Operating temperature [ C ( F)] Weight [g] Suitable accessories Connector cable: Connector cable: Check valve: When ordering please specify Type + Vacuum level + Nozzle diameter + Composi on of module + Vacuum switch = Item number Example: EKP.9x12-AVA (Compact ejector EKP., vacuum level 9 %, nozzle diameter 1.2 mm, with controlled blow-off func on and with electric vacuum switch with display) 1.: Type 2.: Vacuum level 3.: Nozzle diameter 4.: Composi on of module 5.: Vacuum switch 6.: Op onal EKP. 6 9 max. 6 % vacuum (porous products) max. 9 % vacuum (non-porous products) X Ø 1.2 mm Ø 1.5 mm -E 2 25 Ø 2 mm Ø 2.5 mm -A -Z 3 Ø 3 mm without blow-off-func on with controlled blow-offfunc on with automa c blow-offfunc on with me release -3 sec. VA VO digital with display without vacuum switch -NO (normally open) Example: EKPP.6x15-VA: (Compact ejector EKPP vacuum level 6 %, nozzle diameter 1.5 mm, without addi onal func on) 1.: Model without vacuum- / blow-off control 2.: Vacuum level 3.: Nozzle diameter 4.: Vacuum switch EKPP. 6 9 max. 6 % vacuum (porous products) max. 9 % vacuum (non-porous products) X 12 Ø 1.2 mm -VA 15 Ø 1.5 mm 2 Ø 2 mm -VO 25 Ø 2.5 mm 3 Ø 3 mm digital with display without vacuum switch Suitable connector cables for vacuum switch: 2.51: M8 thread, female, 4-pin, straight plug, cable length 5 m 2.52: M8 thread, female, 4-pin, 9 elbow plug, cable length 5 m Suitable connector cables for EKP for vacuum valve and blow-off control: 2.518: M12 thread, female, 4-pin, straight plug, cable length 2 m 2.519: M12 thread, female, 4-pin, 9 elbow plug, cable length 2 m FIPA GmbH Headquarters Germany Phone: info@fipa.com
3 Display of the energy saving potential by integrated pressure control 6 Air consump on [Nl/min] Tradi onal ejector Energy savings Example of EKP.9x25 resp. EKP.6x25 Pneumatic diagram Ejector without blow-off-func on EKP X EV _ Ejector with controlled blow-off-func on EKP X AV _ Ejector with automa c blow-off-func on with me release EKP X ZV _ > Basic product > Only one control signal > Control of blow-off-func on through outer signal with screw to adjust blow-off-volume > Two control signals > Automa c blow-off when ejector is switched off, delay of blow-off can be manually set between and 3 s, with adjus ng screw > Only one control signal Electric plug / Vacuum switch Electric connec on EKP Ejectors with electronic (digital) vacuum switch EKP-VA with display, 2 outputs a b LEDS Output 1 Output 2 Up Output 2 Output 1 V c a = Control of vacuum b = Permanent (version Z) c = Blow-off-control (version A) M Mode Display Down M8 Connector V > Ejectors without vacuum switch EKP-VO: This type needs to be complemented by an independent vacuum switch in the vacuum system or, during evacua on of a manually controlled volume, by a vacuum gauge. FIPA GmbH Headquarters Germany Phone: info@fipa.com
4 Dimensions EKP f a 139 b c 6,5 45 d e 2 5 G1/4 G1/2 19 (EKP...VA) 83 (EKP...VE) 73 (EKP...VK) 85 3 EKPP a 84 b d 2 c e 19 G1/2 5 3 a = Silencers for nozzle Ø 1.2 or 1.5 mm b = Silencers for nozzle Ø or 3 mm c = Manual vacuum and blow-off control d = Mounting Ø 4.2 mm e = Adjusting blow-off power Diagrams > Vacuum level against feed pressure > Air consumption against feed pressure 1 45 Vacuum [%] EKP.9 EKP.6 Air consump on [Nl/min] EKP.6x3 EKP.9x3 EKP.6x25 EKP.9x25 EKP.6x2 EKP.9x2 EKP.6x15 EKP.9x EKP.6x12 EKP.9x FIPA GmbH Headquarters Germany Phone: info@fipa.com
5 Diagrams > Suction power against vacuum level > Suction power against feed pressure EKP.6x3 EKP.6x25 EKP.6x2 EKP.6x15 EKP.6x Vacuum level [%] EKP.6x3 EKP.6x25 EKP.6x2 EKP.6x15 EKP.6x > Suction power against vacuum level > Suction power against feed pressure 25 3 EKP.9x EKP.9x3 EKP.9x25 EKP.9x EKP.9x25 EKP.9x2 EKP.9x15 5 EKP.9x15 5 EKP.9x12 EKP.9x Vacuum level [%] Evacuation time [sec.] for 1 liter at vacuum level Item no. 1 % 2 % 3 % 4 % 5 % 6 % 7 % 8 % 85 % EKP.6x EKP.6x EKP.6x EKP.6x EKP.6x EKP.9x EKP.9x EKP.9x EKP.9x EKP.9x FIPA GmbH Headquarters Germany Phone: info@fipa.com
Grippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
Vacuum gripping systems Contents
Vacuum gripping systems Contents Vacuum gripping systems at a glance... 16 Customized vacuum grippers... 17 Standard vacuum grippers... 18 www.fipa.com 15 Vacuum gripping systems Vacuum gripping systems
Vacuum gripping systems Contents
Vacuum gripping systems Contents Vacuum gripping systems at a glance... 16 Customized vacuum grippers... 17 Standard vacuum grippers... 18 www.fipa.com 15 Vacuum gripping systems Vacuum gripping systems
VACUUM PUMP P5010. Profit from new vacuum technology
VACUUM PUMP P5010 COAX THE NEXT DIMENSION IN VACUUM TECHNOLOGY Profit from new vacuum technology Patented COAX push-in technology Efficient use of energy Outstanding performance Slim and modular design
Ejector, Series EBS push-in fitting electrical control, T-design with release valve with silencer
Type Ejector Ambient temperature min./max. + C / + C Medium temperature min./max. + C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed
Multi-Stage Ejectors. Multi-Stage Ejectors SEM. Suction rate from 332 l/min to 2,370 l/min. Suitability for Industry-Specific Applications
Multi-Stage Ejectors Suction rate from 332 l/min to 2,370 l/min Suitability for Industry-Specific Applications Applications Multi-stage ejector for handling of cardboard, packing materials, insulating
Simple venturis, series GVP
Simple venturis, series GVP 5-bar compressed air network 45 13 5 35 L1 Exhaust D1 L 1/4 gas, 6x8 quick-connect or 4x6 quick-connect D 30 Connection for options 6 Vacuum 1/ gas Vacuum generators in series
Gripper arms Content. Gripper arms at a glance Angle arms Elbow arms
Gripper arms ontent Gripper arms at a glance... 94 Angle arms... 95 Elbow arms... 101 www.fipa.com 93 Gripper arms At a glance FIPA Gripper arms, clamping diameter 10, 14, 20, 30 mm Angle arms, elbow or
Micro-venturis, series GVA
Micro-venturis, series GVA Reference V : vacuum outlet Coupling M F, 6 mm deep or Quick-connect coupling, tube 4 mm dia. or Male coupling, 4 mm dia.,. mm long ø. 4... Version GVA -- 44 GVASIL or GVASPO
mini-modules compact integrated vacuum pumps LEM
mini-modules compact integrated pumps LEM TM www.coval.com LEM LEM series: mini-module pressure OUT IN 2 exhaust TM All industrial functions integrated into the mini-module Efficient communication for
Vacuum Pumps. Oil-Lubricated Vacuum Pumps EVE-OG. Suction rate from 10 m³/h to 255 m³/h. Suitability for Industry-Specific Applications Schmalz -
Oil-Lubricated EVE-OG Suitability for Industry-Specific Applications Applications pump for universal use in a wide range of different applications in the sector of manual and automatic handling Handling
Vacuum gripping systems Contents
Vacuum gripping systems Contents Vacuum gripping systems at a glance... 16 Customized vacuum grippers... 17 Standard vacuum grippers... 18 15 Vacuum gripping systems Vacuum gripping systems at a glance
Ejector, Series EBS Thread connection pneumatic control, T-design with silencer
Type Ejector Ambient temperature min./max. +0 C / + C Medium temperature min./max. +0 C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed
With Integral Filter and Silencer, Optional Vacuum Switch, Type VADM- Solenoid-Actuated Vacuum Generator with integral filter and silencer Type VADM-
Features and Benefits Solenoid-Actuated Vacuum Generators Types VADM-... / VADMI-... l Integral Filter, Silencer, Manual Override l Integral Solenoid Valve for Controlling Air Supply l Vacuum Range up
VACUUM PUMP Midi Keyboard Pump
Midi Keyboard Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type : VKX pump -92 kpa (-27.16 inhg) VKM pump -85 kpa (-25.1 inhg) : VKX pump 62 Nl/min (2.19 scfm) VKM pump 74 Nl/min
LEM. mini-modules compact integrated vacuum pumps. US3
mini-modules compact integrated pumps LEM TM www.coval.com US3 LEM LEM series: mini-module pressure OUT IN 2 exhaust TM certified quality management system All industrial functions integrated into the
Design Our Highlights... Your Benefits... Example EVE-TR 40 AC3 F: EVE TR 10 AC3 F EVE TR dry-running 2.3 TR-M diaphragm pump to
Pumps Dry-Running Pumps EVE-TR Suitable for Industry Specific Applications Applications pump for making the vacuum available in universal use in a wide range of different applications in the sector of
LEM. mini-modules compact integrated vacuum pumps. US5
mini-modules compact integrated pumps LEM TM www.coval.com US5 LEM LEM Series: Mini-Module pressure OUT IN 2 exhaust TM certified quality management system 40% energy savings (on average, see p.5). No
Solenoid valves "ENOVA" Series 2300
Solenoid valves "ENOVA" Series 300.04 Series 300 Solenoid valves "ENOVA".05 Solenoid valves "ENOVA" Series 300 Solenoid - Differential (Monostable) 5/ 3eC.5.00.36.v ELECTRICAL CONTACTS 0=STANDARD-only
Standard Valves. Vacuum Technology.
Standard Valves Vacuum Technology. Our company Founded in 1970 by Ernst- Günter Meßner, our company started by dealing in industrial commodities. Shortly thereafter, we took the step towards our own production
1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
LEMAX. mini-modules. "ASC" compact vacuum pumps US2
mini-modules LEMAX "ASC" compact pumps TM www.coval.com US2 OUT IN pressure LEMAX series: compact P = 4 to 8 bar 3.5 bar blow-off exhaust 2 ➊ ➋ ➌ ➍ ➎ 3.5 bar pressure regulator "Vacuum" solenoid valve
Vacuum Level. Max Vacuum -Kpa / Hg. Model A B C D E F G H ØI Supply Vacuum Exhaust CV05H / SK CV10H / SK
VACUUM VENTURI CV VACUUM VENTURI Anodized aluminum body All metal construction Maximum vacuum of 27 Hg Vacuum flow rates up to 8CFM Single stage technology HSK s include part presence switch R N CV 15
Vacuum generators Key features
Vacuum generators Vacuum generators Key features Product overview Vacuum generator All Festo vacuum generators have a single-stage design and operate according to the venturi principle. The product families
Quick-change systems Content
Quick-change systems Content Quick-change systems at a glance... 12 Series S... 13 Series SR... 18 Series ASR... 39 Quick-change systems At a glance Quick-change systems > Safe and stable connection of
Facts and figures MULTILIFT V 6
Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)
Control unit for valves with inflatable sealing system
Control unit for valves with inflatable sealing system Type ICS A model from the system -vacotrol Shut-off valves are used in transport equipment for bulk powder and granulate, whose shut-off mechanism
Vacuum generators 1.1. High vacuum levels of up to 93% Easy connection of holders and suction cups. Lightweight and compact design.
High vacuum levels of up to 93% Easy connection of holders and suction cups Lightweight and compact design No wearing parts Long service life Vacuum monitoring with vacuum switch 2005/07 Subject to change
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
Vacuum Generators. Catalogue Edition 2
Vacuum Generators Catalogue Edition 2 Switch Options S = SK = The fixed switch option is normally open and changes position at 12 Hg The adjustment of the SK model switch is between 6-16 Hg Features: Anodized
14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
Volumetric Feeders, AccuRate Series
Volumetric Feeders, AccuRate Series Volumetric feeding of bulk solids Feeding without internal agitation Gentle material conditioning Economical and simple integration Compact design Application Feeders
Vacuum technology Moduflex vacuum generator Peripheral module
Vacuum technology Moduflex generator Peripheral module Catalogue PDE2548SLUK-ev Moduflex generator Summary Page Applications... 3 Vacuum technology... 4 Order codes...5 Complete generators and stand alone
Innovative solutions for your handling projects
For a Compact and durable design, Look no further! Foams adjust to smooth and rough surfaces easily Level compensators allow the Mini-Gripper to adjust for uneven layer heights without changing the mount
Vacuum Generators. Section B.
Section www.parker.com/pneu/vacgen 2 asic Generator Selection How to Select a Generator 4-9 Inline : Single Stage MCA, CV, CV-CK MCA is lightweight generator that can be located directly on the cup fitting
LDW-HK. Deadweight Tester / Pressure Balance Hydraulic & Compact Design
Deadweight Tester / Pressure Balance LDW-HK Rel. 20120820 Applica ons: Primary standard for defining the pressure scale in a range up to 1200 bar hydraulic Reference instrument for factory and calibra
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
Phone: Fax:
www. hi wi n. c om HI WI NCor por at i on 1400Madel i nelane El gi n,i L60124 Phone:8478272270 Fax:8478272291 i nf o@hi wi n. c om www. hi wi n. c om Welcome to HIWIN Welcome to HIWIN Directly driven HIWIN
Facts and figures MULTILIFT SELECT 6
Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L
[Small diaphragm vacuum pumps]
![[Small diaphragm vacuum pumps]](/thumbs/71/66126660.jpg "[Small diaphragm vacuum pumps]")
[Small diaphragm vacuum ] The small vacuum shown on this page produce vacuum using a diaphragm. They can be used either as vacuum pump or as a small compressor, and they are able to deliver 100% oil-free
Pumps, fans, motors, strainers. Turbo-pumps Hydro-ejectors Fans Ducts for fire brigades...299
Pumps, fans, motors, strainers Strainers...290 Strainers - Accessories...292 Filters...293 Turbo-motors - High speed, hydraulic...294 Turbo-pumps...295 Hydro-ejectors...296 Fans...297 Ducts for fire brigades...299
Related vacuum products
Vacuum component C O N T E N T S variation 420 Position locking valve () 422 Compact vacuum regulator () 426 Vacuum break unit () 436 Vacuum filter large volume union type (VSFB) 440 Compact vacuum filter
SKF VectoLub, VE1B units
1-4403-EN SKF VectoLub, VE1B units External minimal quantity lubrication, Volumetric metering The emql system SKF VectoLub is a clean and economical alternative for lubricant projection in minimal quantity.
MULTI JECTOR Vacuum Pumps
VOLKMANN MULTI JECTOR Vacuum Pumps and Vacuum Components by VOLKMANN multiple stage ejectors energy-saving compact ejectors stainless steel Vacuum Pumps vacuum switches vacuum filters VOLKMANN has been
Multi Processing Station with Oven 24V
- 536632 Multi Processing Station with Oven 24V I9 Q10 Q4 I1 O14 I8 Q7/Q8 I1 I3 I4 I2 Q3 not in the picture: Q1, Q2, Q5, Q6, Q9, Q11, Q12, Q13, I4, I5, I6, I7 Circuit layout of the Multi Processing Station
Compressed Air Conditioning. accessories. One Stop Shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools Compressed Air Conditioning and Accessories One Stop Shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
3D drawings available at Kg GAS-NPT thread adapters available at page 1.117
These small dry vacuum pumps have a suction capacity of 2 and 4 cum/h. The particular shape of the working chamber and the special graphite, with which the locking flanges and vanes are made, allow these
Pressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
FCX TECHNICAL BOOKLET
FAN COIL FCX US FCX USPO This document is based on AERMEC s FCX US, USP, USPO Technical and Installa on Booklet but reflects only those sizes and configura ons currently offered by Phoenix Energy Supply.
Vacuum pumps/generators Small
picompact10 Ejector with COAX patented technology. Reduced air-consumption with 30-50% compared to other ejector technologies. Easy to optimize vacuum performance with a varied selection of micro multi-stage
PD GRIPPER.
PD GRIPPER www.pdgripper.com PDG500 Dimension Weight Air consumption Connection Mounting Material Technical data for PDG500 00x50x05 mm. kg 00 Nl/min /8, Ø8 mm 4 x M8, profile 90x45 (CC45) aluminum, rubber,
Catalog 080-/USA Notes Vacuum Control Valves
Vacuum Control Valves Section Catalog 080-/USA Notes Vacuum Control Valves Catalog 080-/USA Index Vacuum Control Valves VA0 Vacuum Control Valves for Centralized Vacuum Systems VA0PSV & VA0PSP, -Port,
Pneumatic High Temperature Clamps and Grippers
Cam Type Gripper for Tubes Cam type gripper for handling of hot formed tubes. page 14.4 New products 14.0 Notes high temperature clamps and grippers are designed for applications in high ambient temperatures
Volumetric Feeders, AccuRate Series
Volumetric Feeders, AccuRate Series Volumetric feeding of bulk solids Feeding without internal agitation Gentle material conditioning Economical and simple integration Compact design Application Feeders
KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type l
KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type 250 300l Execution - total volume mixer bowl approx. 380 l, nominal volume approx. 300 l - stationary design, with four height adjustable
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2
1-4009-EN PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2 The PTEX extruder pumps are pneumatically actuated pumps designed to deliver lubricant under pressure to lubrication
Blowers. SILENCE 54 ASO 55 ROBUST 56 AIRPACK 57 MONO 58 Frequency Converter 59 Accessories General Catalog Process Heat
52 SILENCE 54 ASO 55 ROBUST 56 AIRPACK 57 MONO 58 Frequency Converter 59 Accessories 6 www.leister.com General Catalog Process Heat 53 SILENCE: The quieter option. No blower no air! In industrial processes
VACUUM A RESOURCE FOR EVERYONE
Vacuum grippers VACUUM PRODUCTS INNOVATORS IN VACUUM TECHNOLOGY CATALOG VERSION 5.0 VACUUM A RESOURCE FOR EVERYONE www.piab.com Accessories Suction cups Vacuum pumps PVA VACUUM SWITCHES, INDUCTIVE UNIVERSAL
MAXXMILL Vertical milling center for 5-sided machining MILLING
MAXXMILL 400 630 750 Vertical milling center for 5-sided machining MILLING EMCO-WORLD.COM MAXXMILL 400 Compact vertic 1 MACHINE BED Machine bed and slide systems made of solid welded steel and cast iron
MICRO EJECTORS ME12, ME25, ME60. Specifications. Mass MICRO EJECTORS. Vacuum switches. Micro ejectors. Single and twin solenoid valves.
ME12, ME25, ME60 Specifications Micro ejectors Media Operating pressure range MPa [psi.] Operating temperature range C [ F] Nozzle diameter Note mm [in.] kpa [in.hg] flow rate Note R/min [ft. 3 /min.]
Blanking. External Vacuum spec. (V) Standard pilot spec. (R) Vacuum spec. (V) Standard
Solenoid valve Compact 1, SYJ Compact size: 1 mm (1, SYJ) 15 mm (SYJ5) 18 mm (SYJ7) Low power consumption:.1 W QZ 1 mm: QZ1 15 mm: QZ2 18 mm: QZ K KF Compact 2 port valve X2 T T7/17/25 P P/5/7 G42 1 SYJ/5/7
MINIMAT Control Screwdrivers
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver pneumatic MINIMAT Control Screwdrivers The basic solution for almost all screwdriving tasks angle head design torque from 0.3-65
Air Valve AIR-PILOTED VALVES
K-UV002 Ver.1.0 ir Valve I-ILOTED VLVES INSTUCTI MNUL Ver.1.0 ir-piloted Valves Features Since the unit requires air piping only, with no need for electrical wiring, it can be handled by a person without
VACUUM CONVEYOR SYSTEM
ISO 9001 CERTIFIED 0575 Ⅱ 1Dc 90 C / Ⅱ 2 GD c 100 C VACUUM CONVEYOR SYSTEM Why!! We are VMECA Vacuum conveyor system? Minimal Maintenance Low Noise Level Automatic Filter Cleaning System Simple to Installation
EZ-View. Flow Meters ISO CERTIFIED 9001
EZ-View ISO CERTIFIED 9001 General Design Features OPERATING PRINCIPLE The EZ-View Flow Meter is a variable-area instrument. A precisionmolded, sharp-edged Orifice, located within the Piston Assembly,
The Easiest Way to Build a Custom Handling System
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service The Easiest Way to Build a Custom Handling System camoline the Cartesian Motion building system 2 Rationalizing
Facts and figures INTEGRALPICKER V.
Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical
Special valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.
Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx
SHREDDER ROBUST. Examples of materials and granulates
It crushes all! SHREDDER ROBUST The Robust universal shredder enables simple, economic and efficient crushing of a variety of wood, wood waste and scrap, pallets (including nails and pins), par cle boards,
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
Pneumatic. PVD Everdure Ceramic Valves
PVD Ceramic Valves Ceramic slide plate; extremely long life Built in manual override Transfer modules to combine all sizes Selectable air pilot control Clip-on DIN rail Specification Material Polyamide
ROLLERS TORQUE LIMITERS (SAFETY COUPLINGS) Up to Nm of torque and 120 mm bore DSR
ROLLERS TORQUE LIMITERS (SAFETY COUPLINGS) Up to 12.000 Nm of torque and 120 mm bore 21 - rollers torque limiter: introduc on Precise torque se ng by adjus ng the radially balanced locking nut. Innova
3-step setting. 2-Color Display High-Precision Digital Pressure Switch. Series ZSE30A(F)/ISE30A. Added vacuum range.
2-Color Display High-Precision Digital Pressure Switch Series ZSE3A(F)/ISE3A RoHS Can copy to up to 1 switches simultaneously. The settings of the master sensor can be copied to the slave sensors. Reducing
Heating chamber with mechanical convection
FED series 53 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
Flow VA 500/ 520. Flow sensors for compressed air and gases incl. temperature measurement. Verbrauch.
VA 500/ 520 Flow sensors for compressed air and gases incl. temperature Verbrauch 79 What are the advantages of the flow measuring technology of CS Instruments? 1) Even under pressure, the ow sensor VA
SIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
LED Emergency Drivers
LED Emergency Drivers McWong Interna onal, Inc. 1921 Arena Blvd., Sacramento, CA 95834 Tel: 916-371-8080 Fax: 916-371-6666 Email: support@mcwonginc.com Web: www.mcwonginc.com Copyright 2015 McWong Interna
Richter Twin Piston Quarter-turn Actuators RA
Richter Twin Piston Quarter-turn Actuators RA Compact Powerful Maintenance-free ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for
: Automation Laboratory 1
Table A.1 shows elements found in FluidSIM library with a brief description for each of them. Compressed air supply The compressed air supply provides the needed compressed air. It contains a pressure
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
Multi-Stage Air Powered Vacuum Pumps
Multi-Stage Powered Pumps The MSP Series Multi-Stage Pneumatically-Driven Pumps operate on the Venturi Principle. These pumps are designed for applications requiring high flows at moderate vacuum levels.
Compact and Lightweight. One-touch and screwin connections can be combined.
Vacuum jector ox Style (uilt-in Silencer)/ody Ported Style Series Z SUP Nozzle diameter ø0.5, ø0.7, ø1.0, ø1.3, ø1.5, ø1.8, ø2.0 Style S: Standard : arge low apacity ompact and ightweight X The nozzle
Nozzle diameter: ø0.5, ø0.7, ø1.0, ø1.2. Features
ariety of modularized units enable selections of integrated type ejector units suitable for the application. K eries Nozzle diameter: ø0.5, ø0.7, ø1.0, ø1.2 ZM Q G Y H U B C K KM J JM X XM Features acuum
Lockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
MPS 1-F / MPS 2-F Manual Powder System
E Operating Instructions and Spare Parts List MPS -F / MPS -F Manual Powder System MPS -F / MPS -F MPS -F / MPS -F Table of contents Directions for use Safety rules for the electrostatic powder coating
Series ZQ. Compact Vacuum Ejector. One-touch fitting. Digital vacuum pressure switch With LED display. ZX ZR ZM ZH ZU ZL ZY ZQ ZF ZP ZCU AMJ Misc.
Compact acuum Ejector Series Body width mm, Weight9 g (Single unit with vacuum pressure switch and suction filter) Conventional 21.mm mm One-touch fitting ZR ZM ZH ZU ZL ZY ZF Z ZCU AMJ Misc. Digital vacuum
With Complements. We are pleased to enclose the following equipment details that GlobalBound offers - whatever your needs, we have the answers:
With Complements We are pleased to enclose the following equipment details that GlobalBound offers - whatever your needs, we have the answers: Centralized Lubrication Equipment Minimal Lubrication Systems
Huntington Mechanical Labs, Inc.
R Huntington Mechanical Labs, Inc. Huntington Mechanical Labs, Inc. 155 Nevada ity venue Grass Valley,. 95945 Toll Free: 800-227-8059 Local: 50-27-415 FX: 50-27-4165 Sales email: vacman@huntvac.com Website:
Solenoid valves "OPTYMA32-S" General. Series 2200
1 Solenoid valves "OPTYMA32-S" General Series 2200 1 Series 2200 Solenoid valves "OPTYMA32-S" Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "A" Operational
Solenoid valves "OPTYMA32-S" General. Series 2200
1 Solenoid valves "OPTYMA32-S" General Series 2200 1 Series 2200 Solenoid valves "OPTYMA32-S" Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "A" Operational
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
Ergonomic Handling Solutions. Vacuum Handling Systems Tube Lifters Jumbo and Lifting Devices VacuMaster
Ergonomic Handling Solutions Vacuum Handling Systems Tube Lifters Jumbo and Lifting Devices VacuMaster 53 Vacuum Tube Lifters Jumbo Introduction Application Fast and frequent lifting and moving of workpieces
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
Level Limit Switch soliphant FTM 930/931/932/ Z
Technical Infmation TI 042F/00/e Level Limit Switch soliphant FTM 930/931/932/ Z F Universal Application with Bulk Materials and Dust Ex Area Application The Soliphant has a wide range of safe applications
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
Diaphragm Pumps for Air, Gases and Vapours LABOPORT Mini Diaphragm Vacuum Pumps and Compressors
Data Sheet E 1 LABOPORT Mini Diaphragm Vacuum Pumps and Compressors Series LABOPORT N 8 K_.18 Pumps Technical features: 1% oil-free transfer Pure transferring, evacuation and compression of gases Version
OK-01 TRAM WHEEL FLANGE LUBRICATION APPLICATION DESCRIPTION
TRAM WHEEL FLANGE LUBRICATION APPLICATION The lubrication system is designed for lubricating wheel flanges of trams that are not equipped with pressure air distribution. The system works on the principle
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
GSW-V. Application example. Special Gripper Vacuum Gripper. Weight 0.12 kg 0.39 kg. Clamping diameter 20 mm 32 mm
GSW-V Suction pad diameter 30 mm 125 mm Clamping diameter 20 mm 32 mm Weight 0.12 kg 0.39 kg Gripping force 55 N 980 N Workpiece weight 0.28 kg 4.9 kg Application example Handling of gears in a milling