LED Emergency Drivers

Transcription

1 LED Emergency Drivers McWong Interna onal, Inc Arena Blvd., Sacramento, CA Tel: Fax: Web: Copyright 2015 McWong Interna onal, Inc. Speci ca ons subject to change without no ce V2.0

2 Table of Contents Product Lis ngs LED Emergency Driver: Linear Case LED Emergency Driver: Rectangular Case...12 LED Emergency Driver: Extra Compact Driverless LED Emergency..24 Addi onal Resources Other Product Lines Limited Warranty

3 How to Order LEM U Input U = Universal VAC Opera ng Current: 0700 = 700mA Max : 026 = 26VDC 028 = 28VDC 056 = 56VDC McWong s LEM series of LED Emergency Drivers is designed to provide emergency backup power for safety compliance to UL 924; CAN/CSA-C22.2 No and NFPA requirements for 90 minute egress. This product replaces emergency uorescent ballasts when xtures are converted from uorescent to LED light sources, or for new LED luminaires. One set of two NiCd ba ery packs Standard Features: Safety compliance to UL 924; CAN/CSA- C22.2 No and NFPA requirements for 90 minute egress Open circuit / short circuit protec on Opera ng temperature: 32 F/0 C to 122F/50 C Test switch / charging indicator light Emergency reac on me 1 sec Powder coat steel, stainless or galvannealed case Standard installa ons require three separate parts to func on: One non-emergency LED driver (AC input) LEM U x BCP-NiCd L 4 One LEM series LED emergency driver *Each LED emergency driver model is assigned a default set of ba ery packs, which are automa cally included with your order. Other ba ery pack One set of two NiCd ba ery packs op ons are available, but must be special ordered. This product series is op mized for use with McWong s LED modules. For ques ons regarding compa bility with light sources from other manufacturers please contact technical support. Field-replaceable NiCd ba ery pack (x2) with Emergency-only installa ons require two separate parts: Min. Lead length: 6 UL1452 solid/18awg quick connect 5 One LEM series LED emergency driver 1000V/90 C 4 LED Emergency Drivers: Linear Case Model No.* Input Power Current Ba ery Wa age & Case Type: 0xx = Linear Case Mxx = Rectangular Case Cxx = Extra Compact Case Dxx = Driverless x07 = 7W x18 = 18W Product Series: LEM = LED Emergency Driver Ba ery Capacity Recharge Time (VAC) (W) (VDC) (ma) (VDC) (Ah) (hr) Default Ba ery Pack* LEM U x BCP-NiCd L LEM U x BCP-NiCd L UL

4 LED Emergency Drivers: Linear Case LED Emergency Drivers: Linear Case Dimensions: LEM U Wiring Diagrams: LEM U LEM Driver LEM U 31 mm 25 mm 337 mm 356 mm Con gura on #1: Shared Load Ba ery Pack BCP-NiCd L Dia. 21 mm 20 mm Con gura on #2: Par al Load 2 mm 270 mm 320 mm Model No. Max Overall Length Width Height Moun ng Centers Min Lead Length Weight 6 77 (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lbs) LEM U BCP-NiCd L* Con gura on #3: Separate Emergency / AC Loads *The driver and ba ery packs are a matched set, which are automa cally paired together when you order. Other ba ery pack op ons are available, but must be special ordered.

5 LED Emergency Drivers: Linear Case LED Emergency Drivers: Linear Case Dimensions: LEM U Wiring Diagrams: LEM U LEM Driver LEM U 31 mm 25 mm 337 mm 356 mm Con gura on #1: Shared Load Ba ery Pack BCP-NiCd L Dia. 25 mm 21 mm Con gura on #2: Par al Load 2 mm 340 mm 388 mm Model No. Max Overall Length Width Height Moun ng Centers Min Lead Length Weight 8 99 (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lbs) LEM U BCP-NiCd L* Con gura on #3: Separate Emergency / AC Loads *The driver and ba ery packs are a matched set, which are automa cally paired together when you order. Other ba ery pack op ons are available, but must be special ordered.

6 LED Emergency Drivers: Linear Case LED Emergency Drivers: Linear Case Dimensions: LEM U Wiring Diagrams: LEM U LEM Driver LEM U 31 mm 337 mm 356 mm Con gura on #1: Shared Load 25 mm Ba ery Pack BCP-NiCd L Dia. 25 mm 20 mm Con gura on #2: Par al Load 2 mm 388 mm 440 mm Model No. Max Overall Length Width Height Moun ng Centers Min Lead Length Weight (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lbs) LEM U BCP-NiCd L* Con gura on #3: Separate Emergency / AC Loads *The driver and ba ery packs are a matched set, which are automa cally paired together when you order. Other ba ery pack op ons are available, but must be special ordered.

7 How to Order LEM - M U Input U = Universal VAC Opera ng Current: 0350 = 350mA Max : 056 = 56VDC LED Emergency Drivers: Rectangular Case Wa age & Case Type: 0xx = Linear Case Mxx = Rectangular Case Cxx = Extra Compact Case Dxx = Driverless x07 = 7W x18 = 18W McWong s LEM series of LED Emergency Drivers is designed to provide emergency backup power for safety compliance to UL 924; CAN/CSA-C22.2 No and NFPA requirements for 90 minute egress. This product replaces emergency uorescent ballasts when xtures are converted from uorescent to LED light sources, or for new LED luminaires. Once set of two NiCd ba ery packs Standard Features: Safety compliance to UL 924; CAN/CSA- C22.2 No and NFPA requirements for 90 minute egress Open circuit / short circuit protec on Opera ng temperature: 32 F/0 C to 122F/50 C Test switch / charging indicator light Emergency reac on me 1 sec Powder coat steel, stainless or galvannealed case 12 Standard installa ons require three separate *Each LED emergency driver model is assigned a default set of ba ery packs, which are automa cally included with your order. Other ba ery pack parts to func on: op ons are available, but must be special ordered. This product series is op mized for use with McWong s LED modules. For ques ons regarding One non-emergency LED driver (AC input) compa bility with light sources from other manufacturers please contact technical support. One LEM series LED emergency driver One set of two NiCd ba ery packs Field-replaceable NiCd ba ery pack (x2) with Emergency-only installa ons require two separate parts: Min. Lead length: 6 UL1452 solid/18awg quick connect 13 One LEM series LED emergency driver 1000V/90 C 12 Model No.* Input Power Current Ba ery Product Series: LEM = LED Emergency Driver Ba ery Capacity Recharge Time (VAC) (W) (VDC) (ma) (VDC) (Ah) (hr) Default Ba ery Pack* LEM-M U x BCP-NiCd M LEM-M U x BCP-NiCd M UL 13

8 LED Emergency Drivers: Rectangular Case LED Emergency Drivers: Rectangular Case Dimensions: LEM-M U Wiring Diagrams: LEM-M U LEM Driver LEM-M U Ba ery Pack BCP-NiCd M 400 Con gura on #2: Par al Load 45 Con gura on #1: Shared Load 49.6 MAX 133 MAX 21 Model No. Max Overall Length Width Height Moun ng Centers Min Lead Length Weight (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lbs) LEM-M U BCP-NiCd M* Con gura on #3: Separate Emergency / AC Loads *The driver and ba ery packs are a matched set, which are automa cally paired together when you order. Other ba ery pack op ons are available, but must be special ordered.

9 LED Emergency Drivers: Rectangular Case LED Emergency Drivers: Rectangular Case Dimensions: LEM-M U Wiring Diagrams: LEM-M U LEM Driver LEM-M U Con gura on #1: Shared Load Ba ery Pack BCP-NiCd M Con gura on #2: Par al Load Model No. Max Overall Length Width Height Moun ng Centers Min Lead Length Weight (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lbs) LEM-M U BCP-NiCd M* Con gura on #3: Separate Emergency / AC Loads *The driver and ba ery packs are a matched set, which are automa cally paired together when you order. Other ba ery pack op ons are available, but must be special ordered.

10 How to Order LEM - C U Input U = Universal VAC Opera ng Current: 0200 = 200mA 0400 = 400mA Max : 036 = 36VDC LED Emergency Drivers: Extra Compact Wa age & Case Type: 0xx = Linear Case Mxx = Rectangular Case Cxx = Extra Compact Case Dxx = Driverless x07 = 7W x18 = 18W McWong s LEM series of LED Emergency Drivers is designed to provide emergency backup power for safety compliance to UL 924; CAN/CSA-C22.2 No and NFPA requirements for 90 minute egress. This product replaces emergency uorescent ballasts when xtures are converted from uorescent to LED light sources, or for new LED luminaires. Standard installa ons require three separate parts to func on: One non-emergency LED driver (AC input) One LEM series LED emergency driver One NiMH ba ery pack Emergency-only installa ons require two separate parts: One LEM series LED emergency driver One NiMH ba ery pack Standard Features: Safety compliance to UL 924; CAN/CSA- C22.2 No and NFPA requirements for 90 minute egress Open circuit / short circuit protec on Opera ng temperature: 32 F/0 C to 122F/50 C Test switch / charging indicator light Emergency reac on me 1 sec Powder coat steel, stainless or galvannealed case Field-replaceable NiMH ba ery pack (x1) with quick connect Min. Lead length: 6 UL1452 solid/18awg 1000V/90 C Product Series: LEM = LED Emergency Driver *Each LED emergency driver model is assigned a default set of ba ery packs, which are automa cally included with your order. Other ba ery pack op ons are available, but must be special ordered. This product series is op mized for use with McWong s LED modules. For ques ons regarding compa bility with light sources from other manufacturers please contact technical support Model No.* Input Power Current Ba ery Ba ery Capacity Recharge Time (VAC) (W) (VDC) (ma) (VDC) (Ah) (hr) Default Ba ery Pack* LEM-C U x BCP-NiMH C LEM-C U x BCP-NiMH C UL

11 LED Emergency Drivers: Extra Compact Dimensions: LEM-C U LED Emergency Drivers: Extra Compact Wiring Diagrams: LEM-C U LEM Driver LEM-C U Ba ery Pack BCP-NiMH C Con gura on #2: Par al Load Con gura on #1: Shared Load 49.6 MAX 150 MAX 17 Model No. Max Overall Length Width Height Moun ng Centers Min Lead Length Weight (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lbs) LEM-C U BCP-NiMH C* N/A N/A Con gura on #3: Separate Emergency / AC Loads *The driver and ba ery packs are a matched set, which are automa cally paired together when you order. Other ba ery pack op ons are available, but must be special ordered.

12 LED Emergency Drivers: Extra Compact Dimensions: LEM-C U LED Emergency Drivers: Extra Compact Wiring Diagrams: LEM-C U LEM Driver LEM-C U Con gura on #1: Shared Load Ba ery Pack BCP-NiMH C Con gura on #2: Par al Load Model No. Max Overall Length Width Height Moun ng Centers Min Lead Length Weight (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lbs) LEM-C U BCP-NiMH C* N/A N/A Con gura on #3: Separate Emergency / AC Loads *The driver and ba ery packs are a matched set, which are automa cally paired together when you order. Other ba ery pack op ons are available, but must be special ordered.

13 How to Order LEM - D P U Ba ery Amp-Hour Suffix Code and Max Emergency Power* 1.0 NiCd1.0Ah 9.6V (AA) Max 4W 2.0 NiCd 2.0Ah 9.6V (sc) Max 8W 4.0 NiCd 4.0Ah 9.6V (D) Max 17W Input U = Universal VAC Max Opera ng Current: 0600 = 600mA P = Programmable (DIP switch) Max : 042 = 42VDC Driverless LED Emergency Normal Power & Case Type: 0xx = Linear Case Mxx = Rectangular Case Cxx = Extra Compact Case Dxx = Driverless x07 = 7W x18 = 18W McWong s LEM-Dxx series of Driverless LED emergency products is designed to provide emergency backup power for safety compliance to UL 924; CAN/CSA-C22.2 No and NFPA requirements for 90 minute egress. This product replaces emergency fluorescent ballasts when fixtures are converted from fluorescent to LED light sources, or for new LED luminaires. Standard installa ons of the driverless models require two separate parts to func on: One LEM-Dxx series LED emergency driver One NiCd ba ery pack Normal mode LED so start, emergency mode conversion within 1 second Aluminum low profile housing Field-replaceable NiCd ba ery pack with quick connect Constant current, mul -current selectable output 0-10V dimmable Emergency mode DIP se ngs for 150mA, 300mA, 450mA, or 600mA output current Class I CE & UL Recognized for US and Canada. Suitable for indoor, dry and damp applica ons RoHS compliant (NiCd ba ery excepted) Model No.* Input Max Power Range Max Current Ba ery Ba ery Capacity Product Series: LEM = LED Emergency Driver Recharge Time Emergency Opera on (VAC) (W) (VDC) (ma) (VDC) (Ah) (hr) Ba ery Pack Op ons (See Emergency Power Limits above) LEM-D25-042P0600-U * 6 38* 600* 9.6 See specs , 2.0, 1.0 Ah LEM-D42-042P1000-U * 6 42* 600* 9.6 See specs , 2.0, 1.0 Ah Normal Opera on (VAC) (W) (VDC) (ma) (VDC) (Ah) (hr) LEM-D25-042P0600-U UL Rec. Standard Features: LEM-D42-042P1000-U Safety compliance to UL 924; CAN/CSA-C22.2 No and NFPA requirements for 90 minute egress Open circuit / short circuit protec on Opera ng temperature: 32 F/0 C to 122F/50 C Test switch / charging indicator light * current se ngs must be limited such that the product of the Emergency LED Array mes the Emergency Current does not exceed Ba ery Max Emergency Power ra ng. The driverless LED emergency series is designed for maximum adaptability to accommodate a wide range of outputs. Driverless means that there is no need for a separate AC LED driver; i.e., both normal power and emergency power are regulated by a single self-contained, hybrid AC/emergency driver. The models in this table can be paired with several different ba ery packs. When ordering, you must include a suffix code to indicate the ba ery type desired. For ques ons please contact technical support. Toll Free: (888) Support@McWonginc.com

14 Driverless LED Emergency Driverless LED Emergency Dimensions: LEM-D25-042P0600-U and LEM-D42-042P1000-U Wiring Diagrams: LEM-D25-042P0600-U and LEM-D42-042P1000-U LEM Driver LEM-D25-042P0600-U and LEM-D42-042P1000-U W A L 4.2 Driverless LED Emergency 0-10V L Unswitched L Switched LEM-D25-042P0600-U/ LEM-D42-042P1000-U 0-10V X BLK RED H Ba ery Pack BCP-NiCd , BCP-NiCd , and BCP-NiCd Dipswitch Se ngs: L A D W B E C Dipswitches 1-3 determine the normal mode output current. LEM-D25-042P0600-U LEM-D42-042P1000-U Dipswitches 4 and 5 set various emergency current values. LEM-Dxx-042Pxxxx-U Ba ery Op ons at Typical s Model No. L W H A B C D (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lbs) E Weigh t 4 5 Iemergency Req d Ba ery Typical Ra ng mA 1.0Ah 12V 1.0Ah 24V 2.0Ah 36V LEM-D25-042P0600-U LEM-D42-042P1000-U BCP-NiCd BCP-NiCd Ah 12V mA 26 BCP-NiCd Ah 24V 27 *The driverless LED emergency series is designed for maximum adaptability to accommodate a wide range of outputs. Driverless means that there is no need for a separate AC LED driver; i.e., both normal power and emergency power are regulated by a single self-contained, hybrid AC/emergency driver mA mA * current se ngs must be limited such that the product of the Emergency LED Array mes the Emergency Current does not exceed Ba ery Max Emergency Power ra ng. 1.0Ah 12V 2.0Ah 24V 2.0Ah 36V 2.0Ah 12V 2.0Ah 24V 4.0Ah 36V

15 YEARS OF EXCELLENCE YEARS OF EXCELLENCE Notes: Notes:

16 Limited Warranty LED Emergency Drivers McWong Interna onal, Inc. (herea er referred to as MCWONG ), corporate headquarters located at 1921 Arena Blvd., Sacramento, CA 95834, warrants its products to be free from defects in materials and workmanship from the date of manufacture for the following me periods: Product Series LED Emergency Drivers (all types) Warranty 60 months MCWONG cannot assume any obliga ons or liabili es for consequen al or incidental damages arising from, or in connec on with, the use or performance of its products or other indirect damages with respect to loss of property, revenue or pro t, or cost of removal, installa on or reinstalla on. This limited warranty is not applicable to any product subjected to abnormal stress, such as improper storage, installa on, use and/or maintenance. This warranty is invalid for any product not installed and operated in accordance with all relevant federal, state, and local government regula ons, established industry safety standards, published electrical and temperature ra ngs, and any speci c instruc ons provided by MCWONG for the installa on of the product(s). This limited warranty is extended by MCWONG only to the original or rst end-user purchaser. The standards and condi ons of any tests performed on any MCWONG product(s) by the original purchaser, or by any third party ac ng on behalf of the original purchaser, shall be mutually agreed upon in wri ng and MCWONG shall be noed of, and may be represented at any such tests. Should defects occur a er installa on, and within the warranty period, they should be speci cally described to a MCWONG representa ve. MCWONG shall correct any defects, at MCWONG s op on, by furnishing materials to repair or replace any product(s) that may prove defec ve in materials or workmanship within the warranty period, or by extending a credit in the amount of the purchase price. This does not apply to: (1) damage caused by accident, abuse, mishandling, or dropping; (2) materials which have been subject to unauthorized repair; (3) materials not used in accordance with instruc ons; (4) ordinary wear and tear. MCWONG will be limited to the furnishing of new parts, free of charge, or extending credit for in the amount of the purchase price, in exchange for parts proven to be defec ve and does not include any other costs of removal or installa on. This limited warranty cons tutes the sole and exclusive remedy of the purchase and the exclusive liability of MCWONG, and is in lieu of any and all other warran es, expressed, implied, or statutory as to merchantability, tness for purpose sold, descrip on, quality produc veness, or any other ma er. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY BEYOND THE AFOREMENTIONED WARRANTY PERIOD. Warranty claims can be submi ed by calling our toll free technical support hotline (888) or by visi ng our website and lling out a Warranty Replacement Form (Click on Support >> Warranty Statements). Completed forms should be faxed to (916) or ed to Support@McWonginc.com