APV DELTA SVS1F INSTRUCTION MANUAL BUTTERFLY VALVE. Scan for SV1/SVS1F Valve Maintenance Video

Transcription

1 INSTRUCTION MANUAL APV DELTA SVSF BUTTERFLY VALVE FORM NO.: H74933 REVISION: UK-8 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. Scan for SV/SVSF Valve Maintenance Video

2

3 UK EU Declaration of Conformity for Valves and Valve Manifolds SPX FLOW TECHNOLOGY GERMANY GMBH Gottlieb-Daimler-Str. 3, D Holzwickede herewith declares that the APV double seal and double seat valves of the series SD4, SDT4, SDU4, SDMS4, SDMSU4, SDTMS4, SWcip4, DSV, DA3, DA3SLD, DE3, DEU3, DET3, DKR, DKRT, DKRH in the nominal diameters DN 5-50, ISO 6 and Sh5-6 Sh5 APV butterfly valves of the series SV and SVSF, SVL and SVSL in the nominal diameters DN 5-00, DN 5-50 and ISO 4 APV ball valves of the series KHI, KHV in the nominal diameters DN 5-00 APV single seat, diaphragm and spring loaded valves of the series S, SW4, SWhp4, SW4DPF, SWmini4, SWT4, SWS4, MF4, MS4, MSP4, AP/T, CPV, RG4, RG4DPF, RGMS4, RGE4, RGE4DPF, RGEMS4, PR, PRD, SI, UF/R3, VRA/H in the nominal diameters DN 0-50, ISO / 4 and Sh5-6 Sh5 and the valve manifolds installed thereof meet the requirements of the Directives 006/4/EC (superseding 89/39/EEC and 98/37/EC) and ProdSG (superseding GPSG - 9.GPSGV). For official inspections, SPX FLOW presents a technical documentation according to Appendix VII of the Machinery Directive, this documentation consisting of documents of the development and construction, description of measures taken to meet the conformity and to correspond with the basic requirements on safety and health, incl. an analysis of the risks, as well as an operating manual with safety instructions. The conformity of the valves and valve manifolds is guaranteed. Authorised person for the documentation: Frank Baumbach SPX FLOW TECHNOLOGY GERMANY GMBH Gottlieb-Daimler-Str. 3, D Holzwickede, Germany November 07 Frank Baumbach Regional Engineering Manager, F&B Components

4

5 APV UK APV_SVSF_UK-8_0807.qxp Table of Contents Page. General Terms. Safety Instructions Intended Use 3 4. Mode of Operation General terms 5. Auxiliary Equipment Valve position indication - actuated valve (proximity switches) 5.. Valve position indication - manually operated valve (proximity switches) 5.3. Handle with adjusting device 5.4. Control Unit 5.5. Adapter for control unit 5.6. Turning actuator for control unit 6. Cleaning 8 7. Installation Connections 7.. Welding instructions 8. Dimensions / Weights 0-9. Technical Data General data 9.. Compressed air quality 9.3. Kvs values 9.4. Opening / closing times 9.5. Torques 9.6. Control air consumption 0. Materials 4. Maintenance 5. Service Instructions Disassembly from the line system.. Disassembly of actuating device.3. Dismantling of inner parts.4. Replacement of seals.5. Installation of seals and bearing bushes.6. Installation of actuating device.7. Installation of feedback units 3. Spare Parts Lists 9 (see attachment) SVSF - FZ CU DN 5-00, -4 - RN SVSF - H DN 5-00, -4 - RN Handle SV-HL valve position indication - RN DN5-00, - 4 Turning actuator K-80, K-5, K-80 spring/air - RN Turning actuator spring/air for feedback unit - RN Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

6

7 APV UK APV_SVSF_UK-8_0807.qxp. General Terms This instruction manual has to be read carefully and observed by the responsible operating and service personnel. We do not accept any liability for damage or malfunctions resulting from the non-compliance with this instruction manual. Descriptions and data given herein are subject to technical changes.. Safety Instructions The valve must only be assembled, disassembled and reassembled by persons who have been trained in APV valves or by SPX FLOW service team members. If necessary, contact your local SPX FLOW representative. DANGER!!!!!! - The technical safety symbol draws your attention to important directions for operating safety. You will find it wherever the activities described are bearing health hazards or risks for persons or material assets. - Do not reach into the open valve or into the yoke! Risk of ibruising at movable parts of the valve. - In dismantled state there is the risk of injury by sudden valve operation. - Regular maintenance including replacement of seals and bearing bushes must be scheduled for the valve in order to prevent leakages and discharge of liquids. - Before any maintenance of the valve, the line system must be depressurized and discharged if possible. - Electric and pneumatic connections must be separated. - Observe the following Service Instructions to ensure safe maintenance of the valve. Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

8 APV UK APV_SVSF_UK-8_0807.qxp. Safety Instructions! - DANGER! Welded actuators are preloaded by spring force. Opening of the actuators is strictly forbidden. Danger to life! Actuators which are no longer used and / or defective must be disposed in professional manner. Defective actuators must be returned to your local SPX FLOW representative for their professional disposal and free of charge for you. Please address to your local SPX FLOW representative. 3. Intended Use The intended use as field of application of the butterfly valve is the shut-off of pipeline sections. Arbitrary, structural changes at the valve may affect safety as well as the intended functionality of the valve and are not permissible. Authorizations and External Approvals: ATEX (Directive 04/34/EU) 3 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

9 APV UK APV_SVSF_UK-8_0807.qxp 4. Mode of Operation 4.. General terms Use of high-quality stainless steel and seal materials to the specified requirements, the butterfly valve range DELTA SVSF is applicable in the food and beverage industries as well as in the chemical and pharmaceuticl industries. Valves of the series DELTA SVSF can either be operated manually or remote controlled via a pneumatic actuator. Manual operation and pneumatic actuator including add-on pieces are interchangeable. In the standard design NC, the pneumatic turning actuator opens the valve with compressed air. Reset by spring force into the limit position closed. Extension of operating time of actuated valves by pneumatic air throttle or adjusting screw in the control unit to optimize the flow behaviour and to reduce the risk of pressure hammers in installations if necessay. The butterfly valve can also be used in vacuum systems. The valve opens and closes by turning the disc by 90. Smooth valve passage without diversion of line flow. The opening diameter complies with the size of the inner line diameter. Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8 4

10 APV UK APV_SVSF_UK-8_0807.qxp 5. Auxiliary Equipment 5.. Valve position indication - valve with pneumatic actuator Proximity switches to signal the limit position of the valve disc can be installed in the yoke area if required. We recommend to use our APV standard proximity switches. Type: three-wire proximity switch (ref.-no /93; H63) Operating distance: 4mm / diameter: mm / length: 30 mm. Feedback complete with support and proximity switch (ref.-no /93; H375) for a limit position. Using a valve position indicator other than APV, we cannot guarantee faultless function. 5.. Valve position indication - valve with manual operation Specific manual actuations with feedback feature are available: a) Feedback of the disc position closed (simple variant). b) Feedback of both disc positions open and closed is possible Manual operation with adjusting device As a special design, a handle is available which provides for the fixation of intermediate positions of the flap beside the two limit positions. 5 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

11 APV UK APV_SVSF_UK-8_0807.qxp 5. Auxiliary Equipment fig Control Unit CU Control unit (CU, fig. 5.4.) Units with feedback switch and magnet valve for the pneumatic control of the valve for assembly on the actuator are also available in fieldbus technology. The assembly of a control unit on a pneumatic actuator is possible. The following different designs are available: Control Unit CU3 Direct Connect AS-i extended 6 slaves DeviceNet Profibus CU4-T-Direct Connect /93; H3046 CU4-T-AS-i extended /93; H30468 CU3 DeviceNet /93; H094 CU3 Profibus /93; H Adapter for control unit (fig. 5.5.) CU3 Profibus, CU3 DeviceNet The following adapters are required to install the control unit on the SVSF valve: fig Spare parts for CU adapter Item Pcs. Designation reference No. ID-No. - - CU adapter K080 SVSF, DKR /93 H0943 CU operating cam compl. SVS/DKR /93 H * 3 cyl. screw ISO07 M5x8-A-7 3 adapter set - 4 o-ring 88,6-,78 NBR - 5 o-ring 5,8-,78 NBR - 6 CU adapter for SVS,DKR 7* o-ring 90- NBR * scope of supply actuator 8 o-ring 3,0-,0 NBR 70 9 blind plug G/8" /5 H /93 H /83 H /83 H /93 H /83 H /83 H /93 H0885 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8 6

12 APV UK APV_SVSF_UK-8_0807.qxp 5. Auxiliary Equipment fig Adapter for control unit (fig ) CU4-T-Direct Connect, CU4-T-AS-i extended The following adapter is required to install the control unit CU4 on the SVSF valve: Spare parts for CU4 T- adapter Item Pcs. Designation - - CU4 T-adapter cpl. reference No. ID-No /93 H CU4 T-adapter 3 3 cyl. screw ISO07 M5x6-A-70 o-ring - NBR 55 Shore A 4 o-ring 6- NBR 5 o-ring 0,7-,6 6 CU4-operating cam complete 7 CU4 SVS, DKR operating rod 8 CU4 clamp halves complete 9 cy. screw ISO 476 M4x40 inner hexagon /93 H /3 H /83 H /83 H /83 H /93 H /93 H /93 H /3 H Turning actuator for control unit - For the assembly of a control unit on the butterfly valve a special turning actuator is required. The standard turning actuator must be replaced. Turning actuator for control unit DN 5-00 / K080 F/L Inch - 4 / K080 F/L ref.-no.: /7 H Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

13 APV UK APV_SVSF_UK-8_0807.qxp 6. Cleaning 6.. Cleaning recommendation The valve passage is cleaned by cleaning liquids during cleaning of the connected pipelines. Depending on the degree and constituents of soiling, the cleaning liquids, times and processes must be scheduled for the individual application. The compatibility of the individually selected cleaning processes and liquids with the respectively used seals must be verified. 7. Installation In normal installation position, the actuator is positioned vertically to the top. Depending on the respective application, optional installation positions can, however, also be realized. SVSF valves are equipped for the assembly between FG flanges. Attention: Observe welding instructions. 7.. Connections Standard plain flanges FG between which the valve is installed form part of the scope of supply. The flanges have weld ends in the respective nominal dimension. Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8 8

14 APV UK APV_SVSF_UK-8_0807.qxp 7. Installation 7.. Welding Instructions - Observe the bore position during welding of the mating flanges (see fig. and table). aº aº DN 5 (flange 4 bores) - screws DN 40-65,5-3 (flange 4 bores) - 4 screws DN 80,00 4 (Flange 8 bores) - 6 screws DN Inch aº 5-40,5 8º 50 6º 65,5 4º 3 3º 80, º - Welding may only be carried out by certified welders (DIN EN ISO 9606-). (seam quality DIN EN ISO 587). - The welding of the mating flanges must be effected in such a way that deformation strain cannot be transferred. - TIG orbital welding is the most appropriate method. - Before welding, all sensitive parts must be removed! Dismantle the valve core with seals from between the mating flanges. - After welding of the mating flanges and after work at the pipelines, the corresponding parts of the installation or pipelines must be cleaned from welding residues and soiling. If these cleaning instructions are not observed, welding residues and dirt particles can settle in the valve and cause damage or be carried over to other parts of the installation. - Any damage resulting from the non-observance of these welding instructions is not subject to our guarantee. 9 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

15 APV UK APV_SVSF_UK-8_0807.qxp 8. Dimensions / Weights SVSF with control unit CU4 Ø 34 SVSF with turning actuator Ø C B Ø C Ø D Ø D B A A Dimensions in mm DN A B B Ø C Ø D Ø E butterfly valve with turning actuator Weights in kg butterfly valve with turning actuator and control unit ,5 45, ,0 6, ,7 6, ,4 7, ,5 473, ,0 8, ,4 8, ,8 9,8 Inch 98 7,5 45,5 85,6 5 5,0 6,0, ,8 38 5,7 6, ,8 5 6,4 7,4, ,5 473, ,3 63,5 7,0 8, ,9 76, 7,4 8, ,6 0,6 8,8 9,8 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8 0

16 APV UK APV_SVSF_UK-8_0807.qxp 8. Dimensions / Weights SVSF with manual actuation C Ø E Ø D B Dimensions in mm A DN A B C Ø D Ø E Weights in kg , , , , , , , , , , Inch ,6 5,, , ,8 38,9 98 0, ,8 5 3,3, ,3 63,3 4, ,5 65 7,9 76, 4, , ,6 0,6 5, Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

17 APV UK APV_SVSF_UK-8_0807.qxp 9. Technical Data elbow union - G/8" slewable tightening torque Nm 9.. General data - max. lin pressure : 0bar - max. operating temperature : 35 o C EPDM, HNBR * VMQ, * FPM - short-term load : 40 o C EPDM, HNBR * VMQ, * FPM * (no steam) - vacuum tightness : mbar - opening angle of butterfly valve : 90 o min. air pressure for actuator : 6bar max. air pressure for actuator : 0bar turning actuator K080 F/L - air connection (for hose) : 6x elbow union - G/8" slewable : tightening torque Nm 9.. Compressed air quality: Quality Class acc. to ISO content of solid particles: Quality Class 3 max. size of solid particles per m³ 0000 of 0,5µm < d,0µm 500 of,0µm < d 5,0µm content of water: Quality Class 3 max. dew point temperature -0 C For installations at lower temperatures or at higher altitudes, additional measures must be considered to reduce the pressure dew point accordingly. content of oil: Quality Class max. 0,0mg/m³ The oil applied must be compatible with Polyurethane elastomer materials kvs values in m³/h DN Inch , , Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

18 APV UK APV_SVSF_UK-8_0807.qxp 9. Technical Data 9.4. Opening and closing times The actuating times depend on the length of the air line between the magnet valve to the air control and the actuator. For air lines with a length of up to m, the opening time for butterfly valves DN 5/ to DN 00/4 at 6 bar control air pressure amounts to about second. The closing time, after air shut-off, depends on the nominal dimension and amounts to to 3 seconds. If the valves are subject to strong friction, e.g. through dry seals, the actuating times extend accordingly Opening and closing times for butterfly valves The opening and closing times of valves equipped with a control unit can be adjusted. opening time in sec. control air pres. 6 bar closing time in sec. DN Inch hose length m 5 sec.,5 sec. 40,5 sec.,5 sec. 50 sec.,5 sec. 65,5 sec.,5 sec sec. 3,0 sec. 00 4, sec. 3,5 sec. All time data are approximate values taken from sample measurements Torque Md [Nm] for butterfly valves DN Inch Md [Nm] , , Control air consumption at 6 bar control pressure turning actuagor K080 (spring/air) per stroke,8 (NL) 3 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

19 APV UK APV_SVSF_UK-8_0807.qxp 0. Materials - valve disc.457 /.4404 (DIN EN 0088) - housing flange, mating flange DN /.4404(DIN EN 0088) (DIN EN 0088) - SV seal, flange seal standard: option: EPDM HNBR, VMQ, FPM - bearing bush polyamide PA - handle polyamide PA 6.6 Actuator - yoke, actuator.430(din EN 0088) - coupling.4308 (DIN EN 0088) - indicator PE - hard - piston polyacetal POM - spindle bearing polyamide PA - air connection polyamide PA 6.6 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8 4

20 APV UK APV_SVSF_UK-8_0807.qxp. Maintenance Scan for SV/SVSF Valve Maintenance Video - The maintenance intervals depend on the application of the valve and should be determined by the operator carrying out regular checks of the valve. - There are a few wear parts on butterfly valves, principally the SV seal and bearings. - It is recommended that spare seals and bearings are kept by the user. Complete seal kits for the valve service are available (see spare parts lists). - If damaged seals are replaced, generally all seals and bearings should be changed. SV seal grease. - Dismantling and installation of seals according to Service Instructions. - All seals must be slightly greased before their installation. Grease SV seal according to fig. - especially in the cross bores. grease - Assembly of valve and change of valve design NC or NO by installation of the turning actuator according to Service Instructions. - The inner parts of the actuator are maintenance free. grease Attention! Use food-grade special grease being suited for the respective seal material, only. Recommendation: APV assembly grease for EPDM, FPM, HNBR and NBR (0,75 kg /can - ref. No /93; H4738) (60 g /tube - ref. No /93; H4738) or APV assembly grease for VMQ (0,6 kg /can - ref. No /93; H47380) (60 g /tube - ref. No /93; H47379)!!! Do not use grease containing mineral oil for EPDM seals!!!!!! Do not use Silicone-based grease for VMQ seals!!! Less suited grease types can influence the function and life time. 5 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

21 APV UK APV_SVSF_UK-8_0807.qxp. Service Instructions.. Dismantling from the line system! Danger!. Shut off connecting lines, let down line pressure and drain pipeline if possible.. Disconnect electric and pneumatic connections. 3. Release clamp connection at support of proximity switches. Pull off proximity switch. 4. Remove the flange screws. 5. Take butterfly valve out of the flanges. Attention! Disassembly from the line system in closed valve state, only!.. Dismantling of the actuating device The item numbers refer to the spare parts drawings. - Manual actuation with limit switch: Screw off fastening screw (4) at the handle () and lift off handle. - Manual actuation with adjusting device: Screw off fastening screw at handle. Release both fastening screws of the scale sheet, lift off handle with indicator and scale. - Pneumatic actuator: Remove the two fastening screws (0) at the yoke (), lift off actuator (7) with yoke to the top. Lift off coupling (6) and position indicator (5). Attention! If valve position indicators are installed, see to the position of the operating cam (see.6. and.7.). - Actuator with control unit: Dismantling of actuator from yoke as described in item Actuator. The control unit needs not be removed from the actuator..3. Dismantling of the inner parts Valve core - Remove all flange passage screws (9) at the circumferences of the valve housing and pull off the valve core. Sealing ring, bearings, valve disc - Remove all fastening screws around the valve housing and part the housing halves (5, 6). - Pull off the inner parts. Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8 6

22 APV UK APV_SVSF_UK-8_0807.qxp. Service Instructions fig. fig. fig. 3 projecting ring on the disc bolt bearing bush bearing bush wrong assembly.4. Replacement of seals. Lift the flange seals (4) out of the groove and replace them. Remove the fastening screws (0) of the valve core and part the housing halves (5, 6).. Turn the disc (8) in the seal ring (7) into open position. 3. Remove the bearing bushes (). 4. By slight pressing, the seal ring (7) is deformed in its longitudinal axis, and, thus, can be pulled off via the short bearing spindle. 5. Pull the seal ring (7) off the actuating spindle. 6. Clean the valve disc (8). 7. Grease the holes of the new seal ring according to chapter 9 and insert the long actuating spindle of the valve disc (8). 8. Turn the disc (8) in the seal ring (7) into open position. 9. With hand pressure the seal ring is deformed in its longitudinal axis, and, thus, can be pushed on via the short bearing spindle..5. Installation of inner parts The current design of the valve disc has a projected ring on the disc bolt (fig. ). The new valve disc can also be installed in old housings.. Place bearings () on the spindle of the disc. The bearing bushes must be flush with the housing flange (fig. ).. Insert the disc (8) in open position with seal ring (7) and bearing bushes () into one housing half (5,6). 3. Assemble the housing halves (5,6) with the screws (6) alternately crosswise. During the assembly of the housing halves, the projecting ring presses into the plastic surface of the bearing bush and secures the bearing bush against longitudinal movement. Attention! Tightening of the screws (0), the valve disc (8) must be in open position. Damage of valve disc seal during assembly in closed position is possible. Bearings must not project the housing flange (fig. 3). bearing bush 7 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

23 APV UK APV_SVSF_UK-8_0807.qxp. Service Instructions.6. Installation of the actuating device. Observe the steps mentioned in. in reverse order.. With manual butterfly valves, the disc (8) and the handle () are in a line. 3. Attach the position indicator (5) to align with the valve disc onto the square of the actuating spindle of the disc (8). 4. Observe the design of the valve for the installation of the coupling (6) on butterfly valves with feedback: NC = normally closed Valve disc (8) is closed, place coupling (6). The upper operating cam must be adjusted to the upper yoke bore. NO = normally open Valve disc (8) is open, place coupling (6). The lower operating cam must be adjusted to the lower yoke bore. 5. Place actuator (7) with yoke and fasten them with the screws (0)..7. Installation of feedback units (proximity switches) - Valve position indication OPEN: Installation of the feedback unit in the lower yoke bore. - Valve position indication CLOSED: Installation of the feedback unit in the upper yoke bore. - Insert proximity switch support into the yoke bore and fasten it. Introduce the proximity switch into the support until it stops and fix it by the clamp connection. Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8 8

24 APV UK APV_SVSF_UK-8_0807.qxp 3. Spare Parts Lists The reference numbers of the spare parts for the different valve designs and sizes are included in the attached spare parts drawings with corresponding lists. Please indicate the following data to place an order for spare parts: - number of parts required - reference number - designation. subject to change 9 Butterfly Valve DELTA SVSF Instruction Manual: UK - rev. 8

25 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Datum: Name: Trytko Trytko Trytko Ersatzteilliste: spare parts list Scheibenventil SVSF-FZ-CU Butterfly valve SVSF-A-CU DN inch +S Blatt SPX FLOW Germany von 7 RN

26 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Scheibenventil SVSF-FZ-CU DN zoll S Butterfly valve SVSF-A-CU DN inch S Datum: Name: Trytko Datum: Name: Trytko Trytko SPX FLOW Germany Blatt von 7 RN pos. 6 7 Beschreibung description Material material DN5 " DN40,5" ref.-no. ref.-no. ref.-no. ref.-no. 5 Menge quantity item Verschlussstopfen Kunststoff Lock plug Lagerbuchse PA Bearing 30%GF /93 H /93 DN50 ref.-no. H / / / / /4 Flansch FG /4 Flange FG matt/satin fin. H87 H873 H8744 H8750 H876 H8767 Flansch FG / / / / / / Flange FG matt/satin fin. H870 H874 H8758 Dichtung FGN EPDM / / / / / /93 Seal FGN FDA-konform H7780 H7784 H779 H7796 H77303 H77307 Dichtung FGN FPM / / / / / /73 Seal FGN FDA-konform H7779 H7783 H779 H7795 H7730 H77306 Dichtung FGN HNBR / / / / / /33 Seal FGN FDA-konform H730 H740 H73 H74 H73 H74 Dichtung FGN VMQ / / / / / /3 Seal FGN FDA-konform H7778 H778 H7790 H7794 H7730 H77305 Gehäusehälfte I / / / / / /4 Housing half I matt/satin fin. x H3553 x H3558 x H3564 x H3576 x H359 x H3599 Gehäusehälfte I / / / / / / Housing half I matt/satin fin. x H355 x x H3563 x x H359 x Gehäusehälfte II / / / /4 Housing half II matt/satin fin. x H3566 x H3578 x H3594 x H360 Gehäusehälfte II / / / / Housing half II matt/satin fin. x H3565 x x H3593 x Dichtung SV EPDM / / / / / /93 Seal SV FDA-konform H77435 H7745 H77459 H77477 H77484 H7750 Dichtung SV FPM / / / / / /73 Seal SV FDA-konform H77433 H77450 H77457 H77475 H7748 H77500 Dichtung SV HNBR / / / / / /33 Seal SV FDA-konform H68744 H6863 H68745 H68930 H6886 H6834 Dichtung SV VMQ / / / / / /3 Seal SV FDA-konform H7743 H77449 H77456 H77474 H7748 H77499 " ref.-no.

27 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Scheibenventil SVSF-FZ-CU Butterfly valve SVSF-A-CU DN inch +S Datum: Name: Trytko Datum: Name: Trytko Trytko SPX FLOW Germany Blatt 3 von RN pos. Menge quantity Klappe Disc Zeiger /93 5 PE-HART Position indicator H4634 Kupplungsstück / Coupling H5865 Drehantrieb F/L in Eizelverpackung / /7.430 Actuator spring/air with individual packaging H35054 Drehantrieb F/L für RME in Eizelverpackung / Actuator s/a for control-unit with individual packaging Control-Unit CU Control-Unit CU Beschreibung item description material 8 9 Skt. Schraube 0 DIN EN 407-A-70 Hex. Screw 3 7 Skt. Schraube Hex. Screw DIN EN 407-A-70 4 Skt. Schraube DIN EN 407-A-70 Hex. Screw Drehantrieb L/L in Eizelverpackung /.430 Actuator double/air with individual packaging Scheibe 8 4 DIN 5 A=8,4.430 Disk 9 0 Skt. Schraube Hex. Screw Skt. Mutter Hex. Nut Laterne Yoke CU4-T-Adapter CU4-T-Adapter DIN EN 404-A-70 DIN EN 403-A Material PA6.6 GF30 schwarz PA6.6 GF30 schwarz DN5 " DN40,5" ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. ref.-no / / / / / /43 H6037 H444 H6047 H4440 H6059 H / /5 xm8x80 H xM8x80 H /5 M8x35 H / /5 6xM8 H798 8xM8 H / /7 H7305 H /5 M8x H /5 M8x8 H /7 H /5 H /7 H /93 H30475 siehe Betriebsanleitung CU see manual CU DN50 "

28 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Datum: Name: Trytko Trytko Trytko Scheibenventil SVSF-FZ-CU Butterfly valve SVSF-A-CU DN inch +S Datum: Blatt 4 von 7 Name: SPX FLOW Germany RN pos. Beschreibung Material DN5 " DN40,5" item description material Pos.,, 4, 7 nur im kompletten Dichtungssatz erhältlich Item,, 4, 7 available as complete seal kits only DN50 " ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. Menge quantity / /00 Dichtungssatz / / / /00 FPM Seal kit H0577 H05777 H0577 H05778 H05773 H / /0 Dichtungssatz / / / /0 EPDM Seal kit H05747 H05753 H05748 H05754 H05749 H / /0 Dichtungssatz / / / /0 VMQ Seal kit H05783 H05789 H05784 H05790 H05785 H / /06 Dichtungssatz / / / /06 HNBR Seal kit H05759 H05765 H05760 H05766 H0576 H05767

29 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Scheibenventil SVSF-FZ-CU DN zoll S Butterfly valve SVSF-A-CU DN inch S Datum: Name: Trytko Datum: Name: Trytko Trytko SPX FLOW Germany Blatt 5 von 7 RN pos. item description Menge quantity Verschlussstopfen Kunststoff Lock plug Lagerbuchse Bearing Flansch FG Flange FG 3 Flansch FG Flange FG Dichtung FGN Seal FGN Dichtung FGN Seal FGN PA 30%GF.4404 matt/satin fin..430 matt/satin fin. EPDM FDA-konform FPM FDA-konform Dichtung FGN HNBR Seal FGN FDA-konform Dichtung FGN VMQ Seal FGN FDA-konform Gehäusehälfte I Housing half I Beschreibung Material material.4404 matt/satin fin. Gehäusehälfte I.430 matt/satin fin. DN65,5" 3" ref.-no. ref.-no. ref.-no / / / / / /4 H878 H8790 H8809 H880 H884 H / / / / / / H8779 H8798 H / / / / / /93 H7734 H7738 H7733 H7735 H77339 H / / / / / /73 H7733 H7737 H7733 H7734 H77338 H / / / / / /33 H733 H743 H744 H734 H735 H / / / / / /3 H773 H7736 H77330 H7733 H77337 H / / / / / /4 x H369 x H366 x H3649 x H3644 x H / / / / x H368 x DN80 DN00 ref.-no. ref.-no /93 H / /93 H383 H / x x H3643 x H3668 Housing half I Gehäusehälfte II / / /4 Housing half II matt/satin fin. x H36 x H368 x H365 Gehäusehälfte II / / / Housing half II matt/satin fin. x H360 x x Dichtung SV EPDM / / / / / /93 Seal SV FDA-konform H77509 H7753 H7758 H77539 H77579 H7760 Dichtung SV FPM / / / / / /73 Seal SV FDA-konform H77507 H77530 H7756 H77537 H77577 H77599 Dichtung SV HNBR / / / / / /33 Seal SV FDA-konform H6887 H6935 H6936 H6883 H667 H667 Dichtung SV VMQ / / / / / /3 Seal SV FDA-konform H77506 H7759 H7755 H77536 H77576 H " ref.-no. x H / x

30 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Scheibenventil SVSF-FZ-CU Butterfly valve SVSF-A-CU DN inch +S Datum: Name: Trytko Datum: Name: Trytko Trytko SPX FLOW Germany Blatt 6 von 7 RN pos. 8 0 Laterne.430 Yoke in Eizelverpackung / Drehantrieb F/L für RME 9 with individual.430 Actuator s/a for control-unit 0 CU4-T-Adapter CU4-T-Adapter Klappe Disc Skt. Schraube Hex. Screw Skt. Schraube Hex. Screw Skt. Mutter Hex. Nut Skt. Schraube Hex. Screw Skt. Schraube Hex. Screw description DIN EN 407-A-70 DIN EN 403-A packaging Material Zeiger PE-HART Position indicator PA6.6 GF30 schwarz Control-Unit CU PA6.6 GF30 Control-Unit CU schwarz DN65,5" 3" DN80 ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. ref.-no / / / / / /43 H607 H4978 H6090 H608 H60 H /5 M8x H /5 M8x8 H78778 DN00 4" Menge quantity item 9 Beschreibung DIN EN 404-A-70 DIN EN 407-A-70 DIN EN 407-A-70 Kupplungsstück Coupling 7 Drehantrieb F/L in Eizelverpackung / Actuator spring/air with individual packaging material.430 Drehantrieb L/L in Eizelverpackung /.430 Actuator double/air with individual packaging Scheibe 8 4 DIN 5 A=8,4.430 Disk / /5 4xM8x80 H xM8x80 H /5 M8x35 H / /5 8xM8 H798 0xM8 H /7 H /93 H /3 H /7 H /7 H /5 H /7 H /93 H30475 siehe Betriebsanleitung CU see manual CU

31 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Datum: Name: Trytko Trytko Trytko Scheibenventil SVSF-FZ-CU Butterfly valve SVSF-A-CU DN inch +S SPX FLOW Germany Datum: Blatt 7 von 7 Name: RN pos. Beschreibung Material item description material DN65,5" 3" DN80 DN00 4" ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. Menge quantity Pos.,, 4, 7 nur im kompletten Dichtungssatz erhältlich Item,, 4, 7 available as complete seal kits only Dichtungssatz / / / / / /00 FPM Seal kit H05774 H05780 H0578 H05775 H05776 H0578 Dichtungssatz / / / / / /0 EPDM Seal kit H05750 H05756 H05757 H0575 H0575 H05758 Dichtungssatz / / / / / /0 VMQ Seal kit H05786 H0579 H05793 H05787 H05788 H05794 Dichtungssatz / / / / / /06 HNBR Seal kit H0576 H05768 H05769 H05763 H05764 H05770

32

33 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Datum: Name: Trytko Trytko Ersatzteilliste: spare parts list Scheibenventil SVSF -Handbetätigung Butterfly valve SVSF-handle DN5-00 ; -4 inch +S Blatt SPX FLOW Germany von 5 RN

34 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Scheibenventil SVSF-Handbetätigung Butterfly valve SVSF-handle DN5-00 ; -4 inch +S Datum: Name: Trytko Datum: Name: Trytko SPX FLOW Germany Blatt von 5 RN pos. item Kunststoff Lagerbuchse Bearing Flansch FG Beschreibung description PA 30%GF.4404 matt/satin fin. Flange FG H87 H873 H8744 H8750 H876 H8767 Flansch FG / / / / / / Flange FG matt/satin fin. H870 H874 H8758 Dichtung FGN EPDM / / / / / /93 Seal FGN FDA-konform H7780 H7784 H779 H7796 H77303 H77307 Dichtung FGN FPM / / / / / /73 Seal FGN FDA-konform H7779 H7783 H779 H7795 H7730 H77306 Dichtung FGN HNBR / / / / / /33 Seal FGN FDA-konform H730 H740 H73 H74 H73 H74 Dichtung FGN VMQ / / / / / /3 Seal FGN FDA-konform H7778 H778 H7790 H7794 H7730 H77305 Gehäusehälfte I / / / / / /4 Housing half I matt/satin fin. x H3553 x H3558 x H3564 x H3576 x H359 x H / Gehäusehälfte I / / / / / Housing half I matt/satin fin. x H355 x x H3563 x x H359 x Gehäusehälfte II / / / /4 Housing half II matt/satin fin. x H3566 x H3578 x H3594 x H360 Gehäusehälfte II / / / / Housing half II matt/satin fin. x H3565 x x H3593 x Dichtung SV EPDM / / / / / /93 Seal SV FDA-konform H77435 H7745 H77459 H77477 H77484 H7750 Dichtung SV FPM / / / / / /73 Seal SV FDA-konform H77433 H77450 H77457 H77475 H7748 H77500 Dichtung SV HNBR / / / / / /33 Seal SV FDA-konform H68744 H6863 H68745 H68930 H6886 H6834 Dichtung SV VMQ / / / / / /3 Seal SV FDA-konform H7743 H77449 H77456 H77474 H7748 H77499 DN50 ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. " Menge quantity Verschlussstopfen Lock plug Material material DN5 " DN40,5" /93 H /93 ref.-no. H / / / / / /4

35 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Scheibenventil SVSF-Handbetätigung Butterfly valve SVSF-handle DN5-00 ; -4 inch +S Datum: Name: Trytko Trytko SPX FLOW Germany Datum: Blatt 3 von Name: 5 RN pos. Skt. Schraube Hex. Screw DIN EN 404-A-70 Skt. Schraube 0 DIN EN 407-A-70 Hex. Screw Material Beschreibung item description material DN5 " DN40,5" DN50 " ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. ref.-no / / / / / /43 H6037 H444 H6047 H4440 H6059 H / /5 xm8x80 H xM8x80 H78789 Menge quantity Klappe Disc /5 4xM8x8 H78778 Skt. Mutter / /5 DIN EN 403-A.430 Hex. Nut 6xM8 H798 8xM8 H798 Handbetätigung PA /93 Handle 30% GF H5059 Sicherungsscheibe M / Safety disk M5 H7958 Skt. Schraube /5 DIN EN 404-A Hex. Screw M5x8 H78740 Dichtungssatz / / / / / /00 FPM Seal kit H0577 H05777 H0577 H05778 H05773 H05779 Dichtungssatz / / / / / /0 EPDM Seal kit H05749 H05755 Pos.,, 4, 7 nur im kompletten Dichtungssatz erhältlich Item,, 4, 7 available as complete seal kits only H05747 H05753 H05748 H / /0 Dichtungssatz / / / /0 VMQ Seal kit H05783 H05789 H05784 H05790 H05785 H0579 Dichtungssatz / / / / / /06 HNBR Seal kit H05759 H05765 H05760 H05766 H0576 H05767

36 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Scheibenventil SVSF-Handbetätigung Butterfly valve SVSF-handle DN5-00 ; -4 inch +S Datum: Name: Trytko Datum: Name: Trytko SPX FLOW Germany Blatt 4 von 5 pos. item description Material material Verschlussstopfen Kunststoff Lock plug Lagerbuchse PA Bearing 30%GF Flansch FG.4404 Flange FG matt/satin fin. 3 Flansch FG.430 Flange FG matt/satin fin. Dichtung FGN EPDM Seal FGN FDA-konform DN65,5" 3" ref.-no. ref.-no. ref.-no. Menge quantity Dichtung FGN Seal FGN Dichtung FGN Seal FGN Gehäusehälfte I Housing half I Gehäusehälfte II Housing half II Gehäusehälfte II Housing half II Dichtung SV Seal SV Dichtung SV Seal SV Dichtung SV Seal SV Dichtung SV Seal SV Beschreibung Dichtung FGN FPM Seal FGN FDA-konform HNBR FDA-konform VMQ FDA-konform Gehäusehälfte I.4404 Housing half I matt/satin fin..430 matt/satin fin matt/satin fin..430 matt/satin fin. EPDM FDA-konform FPM FDA-konform HNBR FDA-konform VMQ FDA-konform /93 H / / / / / /4 H878 H8790 H8809 H880 H884 H / / / / / / H8779 H8798 H / / / / / /93 H7734 H7738 H7733 H7735 H77339 H / / / / / /73 H7733 H7737 H7733 H7734 H77338 H / / / / / /33 H733 H743 H744 H734 H735 H / / / / / /3 H773 H7736 H77330 H7733 H77337 H / / / / / /4 x H369 x H366 x H3649 x H3644 x H3669 x H / / / / / / x H368 x x x H3643 x H3668 x / / /4 x H36 x H368 x H / / / x H360 x x / / / / / /93 H77509 H7753 H7758 H77539 H77579 H / / / / / /73 H77507 H77530 H7756 H77537 H77577 H / / /33 H6887 H6935 H / /3 H77506 H /33 H / /3 H7755 H77536 DN80 DN00 ref.-no. ref.-no / /93 H383 H /33 H /3 H " ref.-no /33 H /3 H77598

37 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Scheibenventil SVSF-Handbetätigung Butterfly valve SVSF-handle DN5-00 ; -4 inch +S Datum: Name: Trytko Datum: Name: Trytko SPX FLOW Germany Blatt 5 von 5 RN pos. Skt. Schraube Hex. Screw Beschreibung DIN EN 404-A-70 Material material Skt. Schraube 0 DIN EN 407-A Hex. Screw.430 DN65,5" 3" DN80 ref.-no. ref.-no. ref.-no. ref.-no. ref.-no. ref.-no / / / / / /43 H607 H4978 H6090 H608 H60 H / /5 4xM8x80 H xM8x80 H78789 Menge quantity item Klappe Disc Skt. Mutter / /5 DIN EN 403-A.430 Hex. Nut Handbetätigung PA6.6 Handle 30% GF Sicherungsscheibe M5 Safety disk M5 description Skt. Schraube 4 DIN EN 404-A Hex. Screw /5 4xM8x8 H xM8 H798 0xM8 H /93 H /93 H /5 M5x8 H78740 DN00 4" Pos.,, 4, 7 nur im kompletten Dichtungssatz erhältlich Item,, 4, 7 available as complete seal kits only Dichtungssatz FPM Seal kit Dichtungssatz EPDM Seal kit Dichtungssatz Seal kit Dichtungssatz Seal kit VMQ HNBR / / / / / /00 H05774 H05780 H0578 H05775 H05776 H / / / / / /0 H05750 H05756 H05757 H0575 H0575 H / / / / / /0 H05786 H0579 H05793 H05787 H05788 H / / / / / /06 H0576 H05768 H05769 H05763 H05764 H05770

38

39 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Datum: Name: Trytko Handbetätigung SV-HL für Ventilstellungsmeldung Handle for butterfly valves SV-man. yoke for valve position indication Name: DN5-00; -4 zoll / inch SPX FLOW Germany Datum: Blatt von RN

40 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list pos. item description material 3 4 Handbetätigung SV-HL für Ventilstellungsmeldung Handle for butterfly valves SV-man. yoke for valve position indication DN5-00; -4 zoll / inch Handbetätigung.430 Handle Handbetätigung Handle Laterne Yoke Beschreibung Material PA6.6 30%GF Scheibe Washer DIN 5 A8,4 A 6 Skt. Schraube Hex. screw DIN EN 407-A Ronde Round plate SV-H VSM ø85x Cliepsgleitlager Clip slide bearing MCM--04 Iglidur 9 Skt. Schraube Hex. screw DIN EN 404-A Kupplung SV-H VSM Coupling valve position indication.4308 Zeiger Position indicator PE-HART DN5+" DN40, 50,5", " Datum: ref.-no. ref.-no. ref.-no / /7 H553 H7499 Datum: Name: Trytko Menge quantity Skt. Schraube Hex. screw Sicherungsscheibe Safety washer DIN EN 404-A-70 M /5 M5x8 H /93 H /93 H / / /7 H33746 H70 H /5 H /7 M8x35 H /7 H /93 H /5 M8x0 H /7 H /93 H4634 SPX FLOW Germany Name: DN65-00,5"-4" /7 H549 ref.-no. ref.-no. Blatt von RN ref.-no.

41 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Datum: Name: Trytko Trytko Drehantrieb K080, K5, K80 F/L Actuator K080, K5, K80 spring/air Name: Goebel SPX FLOW Germany Datum: Blatt von RN DRAT K080 DRAT K5 DRAT K80

42 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht schriftlich zugestanden. Verstoß verpflichtet zum Schadensersatz und kann strafrechtliche Folgen haben (Paragraph 8 UWG, Paragraph 06 UrhG). Eigentum und alle Rechte, auch für Patenterteilung und Gebrauchsmustereintragung, vorbehalten. SPX FLOW, Germany Ersatzteilliste: spare parts list Datum: Name: Trytko Trytko Drehantrieb K080, K5, K80 F/L Actuator K080, K5, K80 spring/air Goebel Datum: Name: SPX FLOW Germany Blatt von RN pos. Beschreibung Material item description material ref.-no. ref.-no. ref.-no / / /7 H05500 H0550 H / / /3 H3599 H3940 H / / /7 H05499 H0550 H / / /3 H3494 H350 H / / /3 H3493 H350 H /83 3,x3 H /34 H /93 H /73 49,5x3 H /63 H3684 ref.-no. ref.-no. ref.-no. Menge quantity Drehantrieb komplett Actuator complete Drehantrieb komplett Actuator complete Drehantrieb Schweißteil Actuator welded Spindel komplett mit Lager Shaft complete with bearing Spindel Shaft Winkelverschraubung G/8" schwenkbar Elbow union G/8" slewable O-Ring O-ring.430 matt-glänzend.430 poliert Polyamid/ Glasf O-Ring NBR O-ring FPM Lager für Drehantrieb POM Bearing for actuator Lager für Drehantrieb PA Bearing for actuator Stellring.430 Adjust ring K080 K5 K /3 H /3 H79758 Zyl. Kerbstift / /3 DIN EN ISO 8740-VA.4305 Cyl. pin 5x6 H7996 8x45 H7997