Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a
|
|
- Prudence Lesley Curtis
- 6 years ago
- Views:
Transcription
1 Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN to 12 Nominal pressure PN 10 and PN 16 Max. operating pressure 10 or 16 bar Temperatures 10 to +150 o C 14 to +302 o F Type 3335/BR 31a On-off Butterfly Valve with Type 3335 Butterfly Valve and single-acting Type SRP Pneumatic Rotary Actuator Valve body material Cast iron or Spheroidal graphite iron Seat ring EPDM or PTFE Butterfly disc material Spheroidal graphite iron or Cast stainless steel PFA lined Attachment of control valve accessories, such as pneumatic or electropneumatic positioners, electrical or pneumatic limit switches or solenoid valves according to VDI/VDE Throttling service The Type 3335 Butterfly Control Valve can also be used for continuous control applications in the rotation range from 25 to 60. Fig. 1 Type 3335/BR 31a Pneumatic Butterfly Valve Versions Standard version DN 50 to DN 300 Type 3335/BR 31a (Fig. 1) Tight-closing Type 3335 Butterfly Valve with single-acting Type SRP Pneumatic Rotary Actuator Further versions with Double-acting Type DAP Rotary Actuator Larger nominal sizes available on request Emergency manual override for Pfeiffer Type BR 31a-SRP and Type BR 31a-DAP Rotary Actuators Single-acting Type 3278 Rotary Actuator (Fig. 2) Special materials Fig. 2 Type 3335/3278 Pneumatic Butterfly Valve Information Sheet for actuators Information Sheet for rotary valves T 8300 EN T 8200 EN Edition February 2004 Data Sheet
2 Principle of operation The process medium flows through the butterfly valve. The flow coefficient is determined by the opening angle of the disc (4), i.e. the cross-sectional area between the disc and the body (2). The disc is connected to the actuator by means of the shaft and coupling elements. The disc and the seat ring (3) come into contact with the process medium. The seat ring also functions as a flange seal. Fail-safe position Depending on how the rotary actuator is attached, the butterfly valve has two different fail-safe positions which become effective when the pressure acting on the diaphragm is reduced or when supply air fails: Valve CLOSED without supply air, the butterfly valve is closed when the supply air fails. Valve OPEN without supply air, the butterfly valve is opened when the supply air fails Fig. 3 Type 3335 Pneumatic Butterfly Valve Version with EPDM seat ring Fig. 4 Type 3335 Pneumatic Butterfly Valve Version with PTFE seat ring Legend 1 Bearing bushing with O-ring 6 Belleville spring washer 2 Body 8 Elastomer 3 Seat ring 9 Adapter 4 Disc with shaft 10 Mounting block 5 Packing follower 2
3 Table 1 Technical data DN 25 to to 12 1) Nominal pressure PN Valve body style Wafer type Lug type on request Overall length EN Series 20 (DIN 3202 K1) Mountable between flanges PN 10, PN 16 or Class 150 Temperature range Seat ring EPDM 10 to 120 C (14 to 248 F) PTFE 10 to 150 C (14 to 302 F) Permissible operating pressures Seat ring 2) EPDM 16 bar (10 bar with cast iron body) PTFE 10 bar Leakage class acc. to EN Test P12 - Leakage rate "A" 1) Larger nominal sizes available on request 2) Special version for vacuum service Table 2 Materials Valve body Cast iron EN-JL1040 Spheroidal graphite iron EN-JS1049 Seat ring EPDM PTFE Elastomer Silicone Disc Up to DN 150: DN 200 and higher: EN-JS1049 CrNiMo steel CrNiMo steel PFA lined Shaft Up to DN 150: DN 200 and larger: CrNiMo steel CrNiMo steel Packing follower Bearing bushing with O-ring POM/FPM (FKM) Belleville spring washer Spring steel Shaft seal (O-ring) FPM (FKM) Table 3 K v values Opening angle mm in
4 Differential pressure tables for Type 3335 Butterfly Valve for on-off applications Pressures in bar Table 4a Permissible differential pressures for fail-safe position "Valve CLOSED" Springs Required signal Differential Max. perm. supply pressure with shaft Shaft Type SRP Actuator mm in n= pressure 1) pressure 2) St / / / / / / / / / / / ) Required signal pressure to open the disc 2) Disc in closed position; the differential pressure is restricted due to the valve version (see Table 1). Table 4b Permissible differential pressures for fail-safe position "Valve OPEN" Springs Required signal Differential Max. perm. supply pressure with shaft Shaft Type SRP Actuator mm in n= pressure 1) pressure 2) St / / / / / / / / ) 2) Required signal pressure to close the disc Disc in closed position; the differential pressure is restricted due to the valve version (see Table 1). A differential pressure of at least 10 bar is necessary when a PTFE seat ring is used. 4
5 Table 5 Shaft, seating and unseating torques in Nm Perm. shaft torque (up to 20 C; 68 F) with material Seating and unseating torque at a differential pressure of mm in St bar 1) 10 bar 16 bar ) When a PTFE seat ring is used, the higher torque in column "10 bar" applies for a differential pressure of 5 bar. Table 6 Dimensions and weights for Type 3335/BR 31a Butterfly Valve Valve DN 50/2 65/ /3 100/4 125/5 150/6 200/8 250/10 300/12 Length L mm Shaft d mm B mm A mm Flange DIN 3337 F07 F07/F10 F07/F10 F07/F10 F10/F12 F10/F12 F12/F14 F14/F16 F14/F16 SW mm 17 17/22 17/22 17/22 22/27 22/27 27/36 36/46 36/46 C mm /80 60/80 80/90 90/120 90/120 Weight app. kg Type SRP Rotary Actuator H3 mm E mm Connecting flange DIN 3337 F07 F07 F10 F10 F12 F12 F14 F14 F16 F16 SW mm Weight Type SRP kg
6 E Ordering text DN... PN... Materials according to Table 2 for Body Butterfly disc Seat ring H3 A C Actuator Supply pressure Fail-safe position Pfeiffer Type BR 31a or Type bar Valve CLOSED or Valve OPEN Fig. 4 Dimension diagram for Type 3335/BR 31a Pneumatic Butterfly Valve L B Max. differential pressure Temperature of process medium Vacuum service Control valve accessories p 0 in bar (closed position) C or K no/ yes (... mbar abs) Specifications subject to change without notice. SAMSON AG MESS- UND REGELTECHNIK Weismüllerstraße Frankfurt am Main Germany Phone: Fax: Internet:
Pneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationPneumatic Butterfly Valve Pfeiffer Type BR 14b/AT
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT Application Tight closing, double eccentric butterfly valve for process engineering and plants with industrial requirements Nominal size DN 80 to DN 400
More informationSeries 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a
Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a Application Control butterfly valve for use in process engineering and industrial applications to meet high demands Suitable for liquids,
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationLined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
More informationMaxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT
Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationMounting and operating instructions EB 8220 EN. Pneumatic Butterfly Valve Type 3335/AT and Type 3335/3278. Fig. 2 Type 3335/AT
Pneumatic Butterfly Valve Type 3335/AT and Type 3335/3278 Fig. 2 Type 3335/AT Fig. 1 Type 3335/3278 with attached positioner Mounting and operating instructions EB 8220 EN Edition November 2000 Contents
More informationType 3273 Hand-operated Actuator Type 3273 Side-mounted Handwheel
Type 3273 Hand-operated Actuator Type 3273 Side-mounted Handwheel Application Hand-operated actuator or side-mounted handwheel for mounting on control valves, especially Series 240, 250, 260 ), 280 and
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationBR 10a Control and Shut-off Butterfly valve
M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationTypetested versions With Type 3213 Globe Valve, unbalanced. With Type 3214 Globe Valve, balanced
Electric Control Valves/Controller with Electric Actuator with safety function, typetested Types 3213/5725, 3214/5725 Single-seated Globe Valve Type 3213, unbalanced Single-seated Globe Valve Type 3214,
More informationMaxifluss Rotary Plug Valves VETEC Types 72.3/R and 72.4/R
Maxifluss Rotary Plug Valves VETE Types 72.3/R and 72.4/R Application Double-eccentric control valve for process engineering and industrial applications Nominal sizes DN 25 to 400 NPS 1 to 1 Nominal pressures
More informationPfeiffer AT Actuator Pneumatic Rotary Actuator Type SRP and Type DAP
Pfeiffer AT Actuator Pneumatic Rotary Actuator Type SRP and Type DAP Application Single or double acting piston actuator for butterfly valves and other final control elements with turning throttling elements
More informationSelf-operated Pressure Regulators Type Universal Excess Pressure Valve
Self-operated Pressure Regulators Type 41-73 Universal Excess Pressure Valve Application Pressure regulators for set points from 0.05 to 8 bar Valve nominal sizes DN 15 to 100 Nominal pressure PN 16 to
More informationMaxifluss Rotary Plug Valves VETEC Types 73.3/M and 73.7/M
Maxifluss Rotary Plug Valves VETEC Types 7./M and 7.7/M Application Double-eccentric control valve for process engineering, industrial applications, and refineries Nominal sizes DN 25 to 400 1 to 16 Nominal
More informationMaxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R
Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25
More informationANSI version. The valve closes when the differential pressure rises
Self-operated Regulators Series 42 Differential Pressure Regulator with Type 2424/Type 2428 Actuator and Type 2422 Valve Type 42-24 A Type 42-24 B Type 42-28 A Type 42-28 B ANSI version Application For
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationMounting and Operating Instructions EB 8227 EN. Pneumatic Control Valve Type 3331/BR 31a Special version Type 3331/3278. Type 3331 Butterfly Valve
Pneumatic Control Valve Type 3331/BR 31a Special version Type 3331/3278 Type 3331 Butterfly Valve Fig. 1 Type 3331/BR 31a (below) and Type 3331/3278 (top) Mounting and Operating Instructions EB 8227 EN
More informationSeries 42 Self-operated Regulators. Type RS Check Valve (backflow protection)
Series 42 Self-operated Regulators Type 42-10 RS Check Valve (backflow protection) Application Designed to protect nitrogen and compressed air networks against backflow from directly connected systems.
More informationSeries 240 Pneumatic Control Valve Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valve Type 3244-1 Type 3244-7 Three-way Valve Type 3244 with long insulating section circulation inhibitor ANSI version Application Mixing or flow-diverting valve for cryogenic
More informationSeries 14b - Type HD
High-Performance Control and Shut-off Butterfly Valve Series 14b - Type HD Application: Tight-closing, double-eccentric butterfl y valve especially for high requirements in the chemical industry, for example
More informationPneumatic Butterfly Valve Type TOSV
Pneumatic Butterfly Valve Type TOSV Application Triple eccentric, tight closing high-pressure butterfly valve for process engineering and plants with industrial requirements 3 to 84 Nominal pressure ANSI
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
More informationSeries 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve
Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationSeries 240 Type Gas and Type Gas Automatic Shut-off Valves for Gases (valve class D)
Series 240 Type 3241-1-Gas and Type 3241-7-Gas Automatic Shut-off Valves for Gases (valve class D) DIN-DVGW typetested acc. to DIN EN 161 (2013-04) Application Control valve for control systems subject
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationSelf-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 ANSI version Application Pressure regulators for set points from 0.075 to 400 psi (5 mbar to 28 bar) Valves in NPS ½ to 4
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
More informationMounting and Operating Instructions EB 5894 EN. Electric control valves with jet pump. Flanged version of valve with jet pump
Electric control valves with jet pump Type 3267/5824, Type 3267/5825, Type 3267/3374, Type 3267/3274 Pneumatic control valves with jet pump Type 3267-1, Type 3267-7 Flanged version of valve with jet pump
More informationSeries 46 Self-operated Regulators Differential Pressure and Flow Limiters Type 46-5 Type 46-6
Series 46 Self-operated Regulators Differential Pressure and Flow imiters Type 46-5 Type 46-6 Application Differential pressure and flow limitation for district heating systems with indirect connection,
More informationSeries V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator
Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator DIN version Application Compact control valve for the process industry Valve size DN 15 to 50 Pressure rating PN 16 to 40
More informationSelf-operated Pressure Regulators Type Universal Excess Pressure Valve
Self-operated Pressure Regulators Type 41-73 Universal Excess Pressure Valve ANSI version Application Pressure regulator for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN 15
More informationBR 14p - PSA. High-Performance Control and Shut-off Butterfly Valve. Application:
High-Performance Control and Shut-off Butterfly Valve BR 14p - PSA Application: Pressure swing adsorption (PSA) is a method used to separate a gas from a gas mixture as well as to dry or clean gases. The
More informationSeries 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Series 240 Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA ANSI version Application Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA) NPS ½ to 6 Pressure
More informationSelf-operated Temperature Regulators Type 1u Temperature Regulator
Self-operated Temperature Regulators Type 1u Temperature Regulator ANSI version Application Temperature regulators for cooling installations Control thermostats for set points 1) from 15 to 480 F ( 10
More informationBR 20b Ball valve. PFA-lined. Application: Versions:
PFA-lined BR 20b Ball valve Application: Tight-closing PFA-lined ball valve for (highly) corrosive media, especially with high process demands in chemical plants: Nominal sizes DN 25 to DN 200 Nominal
More informationMounting and Operating Instructions EB 5868/5869 EN
Electric Control Valves Types 3213/5857, 3213/5824, Types 3214/5824, 3214/3374, 3214/3274 with safety function: Types 3213/5825, 3214/5825, 3214/3374, 3214/3274 Pneumatic Control Valves Types 3213/2780-1,
More informationSelf-operated Temperature Regulators Type 1u Temperature Regulator
Self-operated Temperature Regulators Type 1u Temperature Regulator Version according to ANSI Application Temperature regulators for cooling plants Control thermostats for set points 1) from 15 to 480 F
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
More informationRotary Plug Valve BR 23e
PTFE-lined Rotary Plug Valve BR 23e Application: PTFE-lined rotary plug valve for aggressive media, especially due to high demands in chemical plants: Nominal diameter: DN 25, DN 50, DN 80 and NPS1, 2,
More informationPneumatic Control Valve Type and Type Micro-flow Valve Type 3510
Pneumatic Control Valve Type 3510-1 and Type 3510-7 Micro-flow Valve Type 3510 ANSI version Application Control valve designed for controlling low flow rates in pilot plants and technical research facilities.
More informationMounting and Operating Instructions EB 8111/8112 EN. Valve Series V2001 Globe Valve Type 3321
Valve Series V2001 Globe Valve Type 3321 Fig. 1 Type 3321 Valve with mounted rod-type yoke for pneumatic or electric actuators (partial view) Mounting and Operating Instructions EB 8111/8112 EN Edition
More informationTypetested for liquid fuels and liquefied petroleum gas (LPG) in the liquid phase (see Data Sheet T 8022 EN) Version according to ANSI standards
Series 240 Pneumatic Control and Quick-acting Shut-off Valves for gases Type 3241-1-Gas and Type 3241-7-Gas DIN-DVGW typetested acc. DIN EN 161 (1996-08) Application Control valves for control equipment
More informationBR 14b / BR 14c Application:
High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example
More informationSelf-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points from 0 to 250 C G ½ to G or DN 5 to DN
More informationMounting and Operating Instructions EB 8222 EN. Type 3310/AT and Type 3310/3278 Pneumatic Control Valves. Type 3310 Segmented Ball Valve
Type 3310/AT and Type 3310/3278 Pneumatic Control Valves Type 3310 Segmented Ball Valve Fig. 1 Type 3310/3278 with positioner Fig. 2 Type 3310/AT Mounting and Operating Instructions EB 8222 EN Edition
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationMounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition
More informationDrain ball valve BR 21a
PTFE - lined Drain ball valve BR 21a Application: Tight-closing PTFE-lined drain ball valve for corrosive media, especially for high process demand in chemical plants: Nominal sizes DN 50 to DN 150 Nominal
More informationPneumatic Control Valve Assembly Type 3331/3278
Pneumatic Control Valve Assembly Type 3331/3278 Fig. 1 Type 3331/3278 Pneumatic Control Valve Assembly 1. Design and principle of operation The pneumatic control valve assembly consists of a Type 3331
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationPneumatic Rotary Actuator Type 3278
Pneumatic Rotary Actuator Type 3278 Fig. 1 Type 3278 Pneumatic Rotary Actuator 1. Design and principle of operation The single-acting rotary actuator incorporating spring return mechanism can be attached
More informationProduct Range. Products for all industrial applications
Product Range Products for all industrial applications CONTROL VALVES BUTTERFLY VALVES Series Description Symbol Version Page Series Description Symbol Version Page 1a Globe Valve PTFE 4 10a Double Eccentric
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationDATA SHEET TB 23b. BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version. Applications. Versions
DATA SHEET TB 23b BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version Applications Stainless steel rotary plug valve with high fl ow capacity for technical process plants, especially
More informationT 8321 EN Type 3278 Pneumatic Rotary Actuator
T 8321 EN Type 3278 Pneumatic Rotary Actuator Application Single-acting pneumatic diaphragm rotary actuator for butterfly valves and other final control elements with rotary closure members. Suitable for
More informationCombined Self-operated Regulators Regulators for Differential Pressure, Flow Rate and Temperature
Combined Self-operated Regulats Regulats f Differential Pressure, Flow Rate and Temperature Application Regulats f district heating supply netwks, heat generats, heat exchangers, building service plants
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationSelf-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
More informationBR 11e Centric Control and Shut-off Butterfly Valve
BR 11e Centric Control and Shut-off Butterfly Valve Application: Tight-closing, centric control and shut-off butterfl y control valve with EPDM lining. Suitable for solids, liquids and gases: Valve sizes
More informationBR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
More informationValve Series V2001 Three-way Valve Type 3323
Valve Series V2001 Three-way Valve Type 3323 Fig. 1 Type 3323 Valve with mounted rod-type yoke (partial view) Edition January 1999 Mounting and operating instructions E 8113/8114 EN 1. Design and principle
More informationMounting and Operating Instructions EB 8111/8112 EN. Series V2001 Valves Type 3321 Globe Valve
Series V2001 Valves Type 3321 Globe Valve Type 3321 Globe Valve with rod-type yoke and Type 3372 Electropneumatic Actuator (350 cm²) Mounting and Operating Instructions EB 8111/8112 EN Edition June 2013
More informationType 1a Globe Control Valve
PTFE-lined Type 1a Globe Control Valve Application: PTFE-lined control valve for corrosive media, particularly for severe requirements in chemical applications: Valve sizes DN 25 to 150 or NPS 1 to 6 Pressure
More informationSeries 26d Ball Valve
Stainless Steel Series 26d Ball Valve Application Tight-closing ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN
More informationSeries 250 Pneumatic Control Valves Type and
Series 250 Pneumatic Control Valves Type 3252-1 and 3252-7 Fig. 1 Type 3252 High-pressure Valve with Type 3277 Pneumatic Actuator and Type 3767 i/p Positioner Edition November 1998 Mounting and operating
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationMounting and Operating Instructions EB 5863 EN. Electric Control Valves. Pneumatic Control Valve
Electric Control Valves Types 3226/5857, 3226/5824, 3226/5825, 3226/5757-7, 3226/5724-8, 3226/5725-7, 3226/5725-8 Pneumatic Control Valve Type 3226/2780 Type 3226/5857 Type 3226/5757-7 Type 3226/2780-2,
More informationStrainers with flanged connections Type 2 N Type 2 NI. Type 2 N/2 NI Strainers. Mounting and Operating Instructions EB 1015 EN
Strainers with flanged connections Type 2 N Type 2 NI Type 2 N/2 NI Strainers Mounting and Operating Instructions Edition June 2014 Definition of signal words DANGER! Hazardous situations which, if not
More informationBR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
More informationTriple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
More informationMounting and operating instructions EB 8093 EN. Series 240 Pneumatic Control Valve for Cryogenic Temperatures. Type and
Series 240 Pneumatic Control Valve for Cryogenic Temperatures Type 3248-1 and 3248-7 Fig. 1 Type 3248 Cryogenic Valve with Type 3277 Pneumatic Actuator as globe and angle valve Mounting and operating instructions
More informationDATA SHEET TB 26l. BR 26l, BR 26t, BR 26v, BR 26x Multi-port ball valve Ball valve in horizontal and vertical version. Application
DATA SHEET TB 26l BR 26l, BR 26t, BR 26v, BR 26x Multi-port ball valve Ball valve in horizontal and vertical version Application Tight-closing multi-port ball valve made of stainless steel for aggressive
More informationARI-ZESA / ARI-GESA / THEA Butterfly valves
ARI-ZESA - Fig. 012 - Free of maintenance butterfly valve with elongated eyelets - soft sealed ARI-GESA - Fig. 013 - Free of maintenance butterfly valve with threaded eyelets - soft sealed / THEA Butterfly
More informationControl valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
More informationSeries 240 and 250 Valves with perforated plug
Series 240 and 250 Valves with perforated plug DIN and ANSI versions Application Optimized trim for critical conditions in applications DN 25 to 500 NPS 1 to 20 Nominal pressure PN 16 to 400 Class 150
More informationButterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
More informationPage 6. Page 6. Page 6. Page 7. Page 8. Page 9. Page 10 / 11
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
More informationMounting and Operating Instructions EB 8053 EN. Series 250 Type and Type Pneumatic Control Valves
Series 250 Type 3252 1 and Type 3252 7 Pneumatic Control Valves Type 3252 High-pressure valve with Type 3277 Pneumatic Actuator and Type 3767 Electropneumatic Positioner Mounting and Operating Instructions
More informationMounting and Operating Instructions EB 8392 EN. Series 3710 Type 3710 Reversing Amplifier
Series 3710 Type 3710 Reversing Amplifier Type 3710 Reversing Amplifier in standard version with pressure gauges for Y 1 and Y 2 Mounting and Operating Instructions EB 8392 EN Edition December 2012 Note
More informationN O S M Catalog Products Products
Catalog Products Products Catalog 2011 Overview Control Valves Actuators Positioners Software Valve Accessories Converters Electronic Process Controllers Media Series Pressure Regulators for Cryogenics
More informationButterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range
ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly
More informationDN25 DN1000 resp. 1" 42"
DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
More informationMounting and Operating Instructions EB 8091 EN. Pneumatic Control Valve Type and Type Type with 120 cm 2 actuator
Pneumatic Control Valve Type 3510-1 and Type 3510-7 Type 3510-1 with 120 cm 2 actuator Type 3510-7 with 120 cm 2 actuator and integrated positioner Type 3510-1 with 60 cm 2 actuator Fig. 1 Pneumatic control
More informationElectronic Limit Switch Type
Electronic Limit Switch Type 3738-20 with optional solenoid valve for on/off rotary actuators Application Electronic limit switch for on/off applications to indicate the end position of rotary actuators.
More informationMounting and Operating Instructions EB 8048 EN. Type and Type Pneumatic Control Valves Type 3249 Aseptic Angle Valve
Type 3249-1 and Type 3249-7 Pneumatic Control Valves Type 3249 Aseptic Angle Valve Ball body version Special version with packing Type 3249-7 Control Valve with Type 3277 Actuator and integrated positioner
More informationSeries 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-1 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More informationDatasheet ERHARD ECLI butterfly valve
Datasheet ERHARD ECLI butterfly valve Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial applications: One of these is the gate valve, which was developed
More informationARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
More information