Angle seat valve with diaphragm actuator VZXA-...-M

Size: px
Start display at page:

Download "Angle seat valve with diaphragm actuator VZXA-...-M"

Transcription

1 Angle seat valve with diaphragm actuator VZXA-...-M Instructions Operating (Translation of the original instructions) Festo AG & Co. KG Ruiter Straße Esslingen Germany a [ ] 2.3 Training of specialized personnel Work on the product should only be conducted by qualified personnel. The qualified personnel must be familiar with installation of process automation systems. 3 Further information Accessories Spare parts 4 Service Contact the regional Festo contact if you have technical questions 5 Information on functional safety 5.1 Attainable safety rating The product is suitable for use as an element in a safety-related system in accordance with IEC In low-demand mode up to SIL 2 In high-demand mode up to SIL 2. Taking into account the necessary minimum hardware fault tolerance from HFT = 1, the product can also be used up to SIL 3 with a redundant design of the entire system. Note The suitability for certain applications can only be determined in connection with the evaluation of further components of the subsystem. Angle seat valve with diaphragm actuator VZXA-...-M... English 1 About this document This document describes the use of the above-mentioned product. It contains additional information for the implementation of the product in safety-oriented systems (safety handbook in accordance with IEC 61508). For all available product documentation Specified standards Version status IEC :2010 part 1, 2, 4 7 IEC 61511:2016 Fig. 1 2 Safety 2.1 General safety information The product may only be used in its original status without unauthorized modifications. Use the valve only in the flow direction indicated. Only use the product if it is in perfect technical condition. Take into consideration the ambient conditions at the location of use. Media Only use media in accordance with specifications Technical data. Use only media that will not cause dangerous reactions if mixed. Do not operate the product with chemically unstable gases, abrasive media or solid materials. If water is used: up to approx ppm of chloride content is permitted. Avoid tensile stresses. If aggressive media are used: limit medium temperature to 65 C. Actuator Do not open the actuator (pressure in the actuator or loaded spring). Avoid mechanical stresses on the valve. Do not use the actuator as a lever. Return to Festo Hazardous substances can endanger the health and safety of personnel and cause damage to the environment. To prevent hazards, the product should only be returned upon explicit request by Festo. Consult your regional Festo contact. Complete the declaration of contamination and attach it to the outside of the packaging. Comply with all legal requirements for handling hazardous substances and transporting dangerous goods. 2.2 Intended use The angle seat valve VZXA-...-M is intended to shut-off gaseous or liquid media in piping systems. To control liquid media, use only the product variant VZXA-B... (media flow under valve seat). 5.2 Safety function Single-acting valves The safety function consists of taking the initial position on request. The request is made by removing the operating pressure. Valves with control function NO: The valve opens completely and remains open until operating pressure is applied. Valves with control function NC: The valve closes completely and remains closed until operating pressure is applied. Double-acting valves The safety function consists of taking the desired position on request. Supply of external energy is required for this. 5.3 Operating conditions General notes on safe operation Chapter 2. Periodic tests (performance test) Chapter 12. Ambient conditions and additional technical specifications Chapter Limitations of application The service life is not limited if the operating conditions are complied with. Maximum admissible interval for a complete performance test: seven years. 5.5 Characteristic values Safety standards (in accordance with IEC 61508) Value Route of assessment 2 H / 1 S Type of Sub System Type A Mode of Operation Low Demand and High Demand Assumed Test Interval T i 1 a Confidence Level 1-á 95 % Hardware Fault Tolerance HFT 0 Lambda ous ë D 1, / h Lambda ous Undetected ë DU 1, /h Mean Time To ous Failure MTTF D 7, h Proof Test Coverage PTC 95 % Low Demand Mode Assumed Demands per Year n op 1 / a Average Probability of Failure on Demand PFD avg 5, High Demand Mode Assumed Demands per Year n op 1 / h (8760 / a) Probability of dangerous Failure per Hour PFH 1, / h Fig. 2

2 6 Product overview 6.1 Design Function The angle seat valve VZXA-...-M is an externally controlled 2/2-directional control valve with diaphragm actuator. The valve seat is slanted around 40 toward the medium flow. To close the valve, the valve actuator using the actuator rod presses the valve disc into the valve seat in a force fit. The supply of the operating medium is controlled by an external valve (usually electrically controlled) that must be additionally integrated into the supply line for the actuator. The actuator can be rotated 360 on the valve housing. Flow over valve seat The valve is closed by spring force with the medium flow. Medium pressure supports valve closing. The valve is opened with operating pressure. Only suitable for gaseous media, because use of incompressible media causes pressure surges in the piping. Flow under valve seat The valve is closed by spring force or with operating pressure against the medium flow. Medium pressure supports the valve opening. In certain constructions, medium pressure that is too high or operating pressure that is too low can lead to the valve not completely closing. Control function Single-acting 1 Position indicator ( Fig. 6) 2 Pneumatic connection (2) 3 Actuator housing 4 Leakage hole 5 Pipe connection; Feed or forwarding (corresponding to flow direction) 6 Arrow for direction of flow 7 Valve housing 8 Actuator interface / angle seat valve with spanner flat 9 Pneumatic connection (4) Closed via spring force or through reduced spring force (normally closed - NC) Opened via spring force (normally open - NO) Fig. 3 Fig Product variants and type code Fig. 4 explains selected product characteristics that are necessary to understand the instructions. Description of the complete type code: Position indicator The pneumatic position indication shows the position of the actuator rod. Indicator cylinder above Indicator cylinder below Characteristic Value Description Type VZXA Angle seat valve Medium flow A Over valve seat - closing in the direction of medium flow (for gaseous media) B Under valve seat - closing against the direction of media flow (for gaseous and fluid media) Connection type TS6, TS7, TS13 Line connection and connection standard Fig. 10 Temperature M C of medium M C Medium pressure 4 to bar to 0 30 bar Valve housing material V13 Stainless steel V14 Stainless steel ASTM A351-CF3M Seat seal material TP PTFE modified T PTFE Actuator M Diaphragm actuator Actuator size mm Control function Closed via spring force, NC S Opened via spring force, NO PR Closed via reduced spring force, NC Actuator rod retracted, valve opened Fig. 6 Actuator rod extended, valve closed 7 Transport and storage When shipping used products: comply with all legal requirements for handling hazardous substances and transporting dangerous goods. For return to Festo Chap. 2. Store the product in a cool, dry, UV- and corrosion-protected environment. Ensure that storage times are kept to a minimum. Fig. 4

3 8 Mounting and installation 8.1 Installing the angle seat valve Prerequisites The piping system is unpressurised and no medium flows in it Lines are clean The line ends are mounted Clean valve Remove all transport packaging. The material used in the packaging has been specifically chosen for its recyclability (exception: oil-impregnated paper = residual waste). Traces of residual grease may be evident on the product due to the production process used. Clean the valve immediately before installation. Risk of injury due to slipping or falling objects! The angle seat valve can weigh up to 11.5 kg, depending on the product version. Body parts can be crushed. In overhead installations, the result can be serious head injuries. Angle seat valve with appropriate means of securing against falling or slipping. 1. Bring the angle seat valve into the mounting position. Observe the flow direction. The permitted direction of flow is marked by an arrow on the valve housing. 2. Connect the piping on the valve housing. Max. tightening torque Fig Connect the line of the operating medium. Pneumatic connection (2): operating medium Pneumatic connection (4): exhaust port 4. For single-acting actuators: mount the silencer in the exhaust port or use a tubing connection for guided exhaust air. 11 Malfunctions Malfunction Possible cause Remedy Valve does not close or closes too slowly Valve does not open or opens too slowly Medium leaking from a leakage hole Medium will not let itself be shut off Fig Maintenance VZXA-B: medium pressure is too high or operating pressure too low Too many contaminants, or contaminants that are too large, in the medium VZXA-A: operating pressure is too low or medium pressure too high VZXA-B: operating pressure too low Seal cartridge defective Seat seal defective Creating necessary differential pressure Technical data. Adjust operating pressure. Comply with operating conditions. Adjust operating pressure or medium pressure. Adjust operating pressure. Replace seal cartridge Spare parts documentation. Replace seat seal Spare parts documentation. Allow the angle seat valve to cool off before working on it. Check product regularly from the outside for leakage. Check function of the product regularly. Clean product regularly with commercial cleaners Proof Test The proof test consists of turning the operating pressure off and back on. Perform the proof test annually. During the proof test, the safety of the application must be ensured. Connection size [ ] 1 1¼ 1½ 2 2½ Max. tightening torque pipe connection Fig. 7 9 Commissioning [Nm] Risk of injury from manipulation in the area of the angle seat valve! Limbs can be cut or severed. Place only the fully mounted angle seat valve in operation. 1. Switch off the operating pressure. 2. Check valve position. The test is successful if the safe status is reached within the specified time. For evaluation of the safe status Chapter Slowly apply operating pressure to the valve. The test is successful if the valve takes its original position again. 4. Check the valve externally (visual inspection). The test is successful if no defect or leakage is detected. 5. Document test results. Prerequisites The valve is fully mounted and connected Checking operating conditions Observe operating conditions and limits Technical data and product labelling. Check connection points for tightness. Check compatibility of the devices in the system for maximum pressure (consider pressure peaks). If necessary, adjust the application parameters. Placing valve in operation 1. Supply medium. 2. Slowly apply operating pressure to the valve. The operating pressure required for reliable switching of the valve depends on the medium pressure Fig. 12 to Fig Function and direction control of the individual pneumatic actuators. 10 Operation Do not touch the angle seat valve during operation or immediately afterward. Comply with operating conditions. Comply with maintenance conditions Chap. 12. After longer idle times: Actuate the valve several times and check for correct function.

4 13 Conversion 14 Removal Risk of injury from items flying around! If they are not secured well enough, parts under pressure can fly around and injure people. Before exchanging wearing parts, depressurise the valve and piping. Allow the angle seat valve to cool off before working on it. 1 Risk of injury due to movement of pressurised parts! The angle seat valve can switch if there is a drop in pressure. Limbs can be cut or severed. Before removal, move the valve to the closed position. Before removal, depressurise the valve and the piping. 2 1 Spanner flats for counter holding 2 SW46 Interface screw Fig Remove the actuator from the valve housing in built-in state The actuator can be disassembled from the valve housing without having to remove the valve from the piping. 1. Depressurise pipelines and let the valve cool off. 2. Secure the actuator from falling or slipping with appropriate means of securing. 3. Extend the actuator rod. With double-acting valves: pressurise connection (4) (3 bar). With valves with NO control function: pressurise connection (2) (3 bar). 4. Loosen interface screw ( Fig. 9, 2). 5. Remove actuator from the valve housing. 6. Switch off the operating pressure Remove actuator from the valve housing in removed state 1. Extend the actuator rod. With double-acting valves: pressurise connection (4) (3 bar). With valves with NO control function: pressurise connection (2) (3 bar). 2. Loosen interface screw ( Fig. 9, 2). 3. Remove actuator from the valve housing. 4. Switch off the operating pressure. Risk of injury due to slipping or falling objects! The angle seat valve can weigh up to 11.5 kg, depending on the product version. Body parts can be crushed. Angle seat valve with appropriate means of securing against falling or slipping. 1. Depressurise the piping and the operating medium connection line. Allow the valve and piping to cool. 2. Empty the piping and valve completely. Make sure no one is located in front of the outlet opening. Catch discharging media in a suitable container. 3. Disconnect connection lines of the operating medium from the valve. 4. Loosen piping connectors. 5. Remove angle seat valve. 15 Disposal Observe the local regulations for environmentally friendly disposal. Dispose of the product in an environmentally friendly manner. When doing this, also take residual media into account (potential recycling of hazardous waste) Mount the valve housing onto the actuator 1. Extend the actuator rod. With double-acting valves: Pressurise connection (4) slowly (3 bar). For valves with NO control function: Pressurise connection (2) slowly (3 bar). 2. Slide spindle of the process valve completely into the process valve. 3. Place actuator onto valve housing. 4. Tighten interface screw ( Fig. 9, 2). Tightening torque: 50 Nm 5. Switch off the operating pressure Turning the actuator 1. Loosen interface screw (max. ½ turn) ( Fig. 9, 2). 2. Turn the actuator into the desired position. 3. Tighten interface screw ( Fig. 9, 2). Tightening torque: 50 Nm

5 16 Technical data General VZXA-A-...-M-... VZXA-B-...-M-... Design Poppet valve with diaphragm actuator Mounting position Any Type of mounting In-line installation Valve function 2/2 Flow direction Non-reversible Medium 1) Compressed air grade of filtration 200 μm, inert gases, vapour Compressed air grade of filtration 200 μm, inert gases, water, petroleum, neutral liquid media, petroleum based hydraulic oil, vapour Medium pressure [bar] 0 30, in accordance with the specification on the rating plate Viscosity [mm 2 /s] š 600 Temperature of medium [ C] Seat seal material: PTFE modified Seat seal material: PTFE Perm. min./max. temp (TS) [ C] Seat seal material: PTFE modified Seat seal material: PTFE Ambient temperature [ C] Operating medium Compressed air in accordance with ISO :2010 [7:4:4] Operating pressure [bar] Max. 7 ( Fig. 12 to Fig. 17) Degree of protection for actuator IP65, IP67, IP67K (with guided exhaust air) Valve housing connection VZXA-...-TS6 Threaded collar in accordance with DIN ISO 228 VZXA-...-TS7 Threaded collar in accordance with ANSI/ASME B VZXA-...-TS13 Threaded collar in accordance with DIN Operating medium port Note on materials GÁ Valve housing VZXA-...-V13 Stainless steel casting (1.4409) Valve housing VZXA-...-V14 Seat seal VZXA-...-TP Seat seal VZXA-...-T Stainless steel casting (ASTM A351-CF3M) PTFE modified PTFE Actuator housing Stainless steel casting (1.4408) Diaphragm actuator seals Actuator rod NBR High-alloy stainless steel Actuator cover Stainless steel casting (1.4408) Product weight CE marking (see declaration of conformity 1) Other media on request Fig According to EU Machinery Directive Medium pressure and operating pressure for valves with medium flow under valve seat VZXA-B-...-M S (Medium flow under valve seat, NO) Nominal width DN Max. medium pressure [bar] Min. operating pressure [bar] Fig. 12 Medium pressure [bar] Fig. 13 DN32 DN40 DN50 Operating pressure [bar] VZXA-B-...-M-90 (Medium flow under valve seat, NC) Nominal width DN Max. medium pressure [bar] Min. operating pressure [bar] 5 Fig. 14 VZXA-B-...-M PR (Medium flow under valve seat, NC with reduced spring force) Nominal width DN Max. medium pressure [bar] Min. operating pressure [bar] 2.1 Fig. 15 Medium pressure and operating pressure for valves with medium flow over valve seat VZXA-A-...-M PR (Medium flow over valve seat, NC with reduced spring force) Nominal width DN Max. medium pressure [bar] 16 8 Min. operating pressure [bar] DN65 Nominal pressure, burst pressure and flow rate of process valve VZXA-...-TS Fig. 16 Connection size [ ] 1 1¼ 1½ 2 2½ Nominal width DN Nominal pressure process valve PN [bar] (up to 200 C temperature of medium) Burst pressure [bar] (up to 200 C temperature of medium) Flow rate K 1) v VZXA-B [m 3 / h] VZXA-A [m 3 / h] ) Water, at +20 C, medium pressure 1 bar at the valve input, free outlet Fig. 11 Medium pressure [bar] DN32 DN40 DN50 DN65 Operating pressure [bar] Fig. 17

Angle seat valve with piston actuator VZXA-...-K

Angle seat valve with piston actuator VZXA-...-K Angle seat valve with piston actuator VZXA-...-K Instructions Operating (Translation of the original instructions) Festo AG & Co. KG Ruiter Straße 82 73734 Esslingen Germany +49 711 347-0 www.festo.com

More information

Angle seat valve with piston actuator VZXA-...-K

Angle seat valve with piston actuator VZXA-...-K Angle seat valve with piston actuator VZXA-...-K Festo AG & Co. KG Postfach 73726 Esslingen Germany +49 711 347-0 www.festo.com 3 Further information Accessories www.festo.com/catalogue Spare parts www.festo.com/spareparts

More information

ELGC-BS-KF. Spindle axis. Instructions Operating c [ ]

ELGC-BS-KF. Spindle axis. Instructions Operating c [ ] ELGC-BS-KF Spindle axis Instructions Operating 8095590 8095590 2018-08c [8095592] Translation of the original instructions 2 Festo ELGC-BS-KF 2018-08c Table of contents 1 Further applicable documents...

More information

Toothed belt axis ELGC-TB-KF. Operating instruction [ ]

Toothed belt axis ELGC-TB-KF. Operating instruction [ ] Toothed belt axis ELGC-TB-KF en Operating instruction 8068220 2017-02 [8068222] Original instructions Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which can

More information

Cylinder with clamping unit / Clamping unit

Cylinder with clamping unit / Clamping unit Cylinder with clamping unit / Clamping unit DNCKE/KEC en Operating instructions 8074345 2017-10b [8074347] Original instructions Symbols: Warning The clamping unit KEC or the cylinder with clamping unit

More information

Quarter turn actuator DAPS..R..-F..

Quarter turn actuator DAPS..R..-F.. Quarter turn actuator DAPS..R..-F.. Festo AG & Co. KG Postfach D-73726 Esslingen +49 711 347-0 www.festo.com (en) Operating instructions 8030408 1309g [8030416] Original: de Quarter turn actuator DAPS..R..-F.....

More information

Solenoid valves VZWP, servo-controlled

Solenoid valves VZWP, servo-controlled Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure

More information

Electric cylinder ESBF-BS/-LS Operating instructions b [ ]

Electric cylinder ESBF-BS/-LS Operating instructions b [ ] Electric cylinder ESBF-BS/-LS-32... 100 en Operating instructions 8076295 2017-11b [8079297] Translation of the original instructions Symbols: Warning Installation and commissioning may only be performed

More information

standards based cylinder DNCI Operating instructions e [ ]

standards based cylinder DNCI Operating instructions e [ ] standards based cylinder DNCI en Operating instructions 8072823 2017-05e [8072825] Original instructions Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which

More information

Spindle axis ELGC-BS-KF. Operating instructions [ ]

Spindle axis ELGC-BS-KF. Operating instructions [ ] Spindle axis ELGC-BS-KF en Operating instructions 8067243 2017-01 [8067245] Original instructions Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which can lead

More information

Mounting and Operating Instructions EB 8039 EN. Type 3351 Pneumatic On/off Valve. Type 3351 Pneumatic On/off Valve. Type 3351 Pneumatic On/off Valve

Mounting and Operating Instructions EB 8039 EN. Type 3351 Pneumatic On/off Valve. Type 3351 Pneumatic On/off Valve. Type 3351 Pneumatic On/off Valve Type 3351 Pneumatic On/off Valve Type 3351 Pneumatic On/off Valve Type 3351 Pneumatic On/off Valve Version with handwheel Mounting and Operating Instructions EB 8039 EN Edition May 2016 Definition of signal

More information

Angle seat valve VZXF, NPT

Angle seat valve VZXF, NPT Angle seat valve VZXF, NPT -V- New Angle seat valve VZXF, NPT Key features Function Angle seat valves are externally actuated valves. These valves are actuated by a direct supply of compressed air. In

More information

Mounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil

Mounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition

More information

Solenoid valves VZWM-L

Solenoid valves VZWM-L q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation Globe control valve, pneumatically operated Actuator sizes 40 mm - 125 mm, Nominal diameter DN10-65 Kolbengesteuertes Geradsitzventil Antriebsgrößen 40 mm - 125 mm, Nennweiten DN10-65 Vanne à siège droit

More information

Solenoid valves VZWM-L, NPT

Solenoid valves VZWM-L, NPT Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM

More information

Mini slide EGSC-BS-KF. Operating instructions b [ ]

Mini slide EGSC-BS-KF. Operating instructions b [ ] Mini slide EGSC-BS-KF en Operating instructions 8081968 2017-11b [8081970] Translation of the original instructions EGSC-BS-KF-EN Identification of hazards and instructions on how to prevent them: Danger

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies Type 5282 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation Contents 1 Operating Instructions... 2 2 Authorized use...

More information

Solenoid valves VZWM-L

Solenoid valves VZWM-L Key features and type codes Brief description Indirectly controlled poppet valve with diaphragm control Connection, valve G¼ G2 Flow rate 1,400 31,000 l/min Available in brass or stainless steel casting

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Type 5404 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation Contents 1 Operating instructions...2 2 Intended use...3 3

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation Type 0131 2/2- or 3/2-way solenoid valve 2/2- oder 3/2-Wege-Magnetventil Électrovanne 2/2 ou 3/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating

More information

Type 0283, Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies

Type 0283, Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Type 0283, 0293 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation Contents 1 The operating instructions...2 2 Intended

More information

CO 3-WAY PNEUMATIC VALVE INSTRUCTION MANUAL 2080

CO 3-WAY PNEUMATIC VALVE INSTRUCTION MANUAL 2080 CO 3-WAY PNEUMATIC VALVE INSTRUCTION MANUAL 2080 STI S.r.l has taken every care in collecting and verifying the documentation contained in this Instruction Manual. The information herein contained are

More information

Type 6213 EV, 6281 EV

Type 6213 EV, 6281 EV Type 6213 EV, 6281 EV 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating instructions

More information

Declaration of Conformity as per Directive 97/23/EC

Declaration of Conformity as per Directive 97/23/EC Declaration of Conformity as per Directive 97/23/EC The manufacturer declares that:, 47906 Kempen, Germany PTFE-lined Rotary plug valves Series 23e, with packing with lever for 90 operation with worm gear

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies Type 5282 2/2-Way Solenoid Valve 2/2-Wege-Magnetventil Électrovanne à 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating instructions contain

More information

Valve terminal VTUG-...-M/VTUG-...-V

Valve terminal VTUG-...-M/VTUG-...-V Valve terminal VTUG-...-M/VTUG-...-V 2 Design 2. Standard valve terminal (straight connecting plate) 2 3 4 Festo AG & Co. KG Ruiter Straße 82 73734 Esslingen Germany +49 7 347-0 www.festo.com Brief description

More information

-H- Note. Pinch valves VZQA Features

-H- Note. Pinch valves VZQA Features Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.

More information

Installation, Operation, and Maintenance Manual

Installation, Operation, and Maintenance Manual Industrial Process Installation, Operation, and Maintenance Manual Series PBFV Plastic Lined Butterfly Valve - Lug and Wafer Style Table of Contents Table of Contents Introduction and Safety...2 Safety

More information

Mounting and Operating Instructions EB 8097 EN. Type and Type Pneumatic Control Valves

Mounting and Operating Instructions EB 8097 EN. Type and Type Pneumatic Control Valves Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347-7, cast body with welding ends Type 3347-7, bar stock body with threaded connections Mounting and Operating Instructions EB 8097 EN Edition

More information

Installation, Operation, and Maintenance Manual

Installation, Operation, and Maintenance Manual Industrial Process Installation, Operation, and Maintenance Manual Series PBV Plastic Lined Ball Valve Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health

More information

Pressure/vacuum switch (V)PE-1/8-...(-SW) PE-PK-...(-SW)

Pressure/vacuum switch (V)PE-1/8-...(-SW) PE-PK-...(-SW) Pressure/vacuum switch (V)PE-1/8-...(-SW) PE-PK-...(-SW) (en) Operating instructions 8068554 2017-05c [8068556] Original instructions Symbols: Warning, Caution Fitting and commissioning to be carried out

More information

Pressure relief valve

Pressure relief valve Pressure relief valve Operating manual Series DHV 712 Version BA-2015.10.20 EN Print-No. 300 510 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0

More information

FL 10 DIAPHRAGM PUMP INSTALLATION INSTRUCTIONS. Before operating the pump, please read the Installation Instructions and safety precautions.

FL 10 DIAPHRAGM PUMP INSTALLATION INSTRUCTIONS. Before operating the pump, please read the Installation Instructions and safety precautions. FL 10 INSTALLATION INSTRUCTIONS DIAPHRAGM PUMP FL 10 DC-P FL 10 AC Before operating the pump, please read the Installation Instructions and safety precautions. Installation Instructions FL 10 Table of

More information

Pinch valves VZQA Features

Pinch valves VZQA Features Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.

More information

T R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU

T R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU T R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU The manufacturer declares that: Pfeiffer Chemie-Armaturenbau GmbH, 47906 Kempen, Germany Butterfly valves BR14a, BR14b, BR14b-Type

More information

Storage, operating and maintenance instructions for AZ plug valves and Standard valves

Storage, operating and maintenance instructions for AZ plug valves and Standard valves ARMATUREN Plug - Valves metallic with PTFE Sleeve 2-7 way Storage, operating and maintenance instructions for AZ plug valves and Standard valves Plug - Valves FEP/PFA - lined, 2-3 way Butterfly - Valves

More information

Mounting and Operating Instructions EB 8111/8112 EN. Valve Series V2001 Globe Valve Type 3321

Mounting and Operating Instructions EB 8111/8112 EN. Valve Series V2001 Globe Valve Type 3321 Valve Series V2001 Globe Valve Type 3321 Fig. 1 Type 3321 Valve with mounted rod-type yoke for pneumatic or electric actuators (partial view) Mounting and Operating Instructions EB 8111/8112 EN Edition

More information

Type 5411, Operating Instructions. Bedienungsanleitung Manuel d utilisation

Type 5411, Operating Instructions. Bedienungsanleitung Manuel d utilisation Type 5411, 5413 3/2 or 4/2 way solenoid valve 3/2 oder 4/2-Wege-Magnetventil Électrovanne 3/2 ou 4/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 THE OPERATING INSTRUCTIONS The

More information

Operating Instructions

Operating Instructions Operating Instructions Quadax Series Butterfly Valves (with actuator) Version September 2009 müller co-ax ag Gottfried-Müller-Str. 1 74670 Forchtenberg Germany Tel. +49 7947 828-0 Fax +49 7947 828-11 E-Mail

More information

Mounting and Operating Instructions EB 8048 EN. Type and Type Pneumatic Control Valves Type 3249 Aseptic Angle Valve

Mounting and Operating Instructions EB 8048 EN. Type and Type Pneumatic Control Valves Type 3249 Aseptic Angle Valve Type 3249-1 and Type 3249-7 Pneumatic Control Valves Type 3249 Aseptic Angle Valve Ball body version Special version with packing Type 3249-7 Control Valve with Type 3277 Actuator and integrated positioner

More information

PN9000 Series Pneumatic Actuators Installation and Maintenance Instructions

PN9000 Series Pneumatic Actuators Installation and Maintenance Instructions 3579049/14 IM-P357-29 CTLS Issue 14 PN9000 Series Pneumatic Actuators Installation and Maintenance Instructions PN9100 PN9200 1. Safety information 2. General product information PN9300 3. Installation

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation 2/2-way angle seat control valve 2/2-Wege-Schrägsitzregelventil Vanne de réglage à siège incliné 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation We reserve the right to make technical

More information

Rack and pinion axis EHMH. Operating instructions [ ]

Rack and pinion axis EHMH. Operating instructions [ ] Rack and pinion axis EHMH en Operating instructions 8076544 2017-09 [8076555] Translation of the original instructions GDCP-EHMH-EN Symbols used: Caution Hazards that can cause minor injuries Note Material

More information

Safety. Operating instructions Solenoid valve VGP DANGER. Contents WARNING CAUTION. Changes to edition Elster GmbH Edition 10.

Safety. Operating instructions Solenoid valve VGP DANGER. Contents WARNING CAUTION. Changes to edition Elster GmbH Edition 10. 27 Elster GmbH Edition.7 Translation from the German 344297 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Solenoid valve Contents Solenoid valve... Contents... Safety....

More information

Type 2000, Operating Instructions. Bedienungsanleitung Manuel d utilisation

Type 2000, Operating Instructions. Bedienungsanleitung Manuel d utilisation 2/2 way angle seat valve, 3/2 way globe valve 2/2-Wege-Schrägsitzventil, 3/2-Wege-Geradsitzventil Vanne à siège incliné 2/2 voies, vanne à siège droit 3/2 voies Operating Instructions Bedienungsanleitung

More information

Mounting and Operating Instructions EB 8111/8112 EN. Series V2001 Valves Type 3321 Globe Valve

Mounting and Operating Instructions EB 8111/8112 EN. Series V2001 Valves Type 3321 Globe Valve Series V2001 Valves Type 3321 Globe Valve Type 3321 Globe Valve with rod-type yoke and Type 3372 Electropneumatic Actuator (350 cm²) Mounting and Operating Instructions EB 8111/8112 EN Edition June 2013

More information

Swing Piston Compressors and Vacuum Pumps

Swing Piston Compressors and Vacuum Pumps Swing Piston Compressors and Vacuum Pumps NPK 018 AC Pressure NPK 018 DC Pressure NPK 018 AC Vacuum NPK 018 DC Vacuum Operating and Installation Instructions Read and observe these Operating and Installation

More information

NEOTECHA NTB-NTC BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS

NEOTECHA NTB-NTC BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS Before installation these instructions must be fully read and understood 2 SAFETY Please also read through these notes carefully. 2.1 General potential danger due to: a. Failure to observe the instructions

More information

Installation and Operating Instructions

Installation and Operating Instructions Original Installation and Operating Instructions Hawle E2 Valve with Flange Outlet, System 2000 or PE Spigot Ends Table of Contents A) General...... 2 A1 Symbols..... 2 A2 Intended use... 2 A3 Labeling...

More information

Pinch valves VZQA. Festo core product range Covers 80% of your automation tasks

Pinch valves VZQA. Festo core product range Covers 80% of your automation tasks q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready

More information

Mounting and Operating Instructions EB 5868/5869 EN

Mounting and Operating Instructions EB 5868/5869 EN Electric Control Valves Types 3213/5857, 3213/5824, Types 3214/5824, 3214/3374, 3214/3274 with safety function: Types 3213/5825, 3214/5825, 3214/3374, 3214/3274 Pneumatic Control Valves Types 3213/2780-1,

More information

-Q- Temperature range C. -L- Operating pressure bar. Vacuum filters ESF Technical data. Function

-Q- Temperature range C. -L- Operating pressure bar. Vacuum filters ESF Technical data. Function Vacuum filters Vacuum filters ESF Function -Q- Temperature range 0 +60 C -L- Operating pressure 0.95 +4 bar Accessory for the suction gripper ESG, mounted between suction cup holder and suction cup with

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact

More information

Connection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request)

Connection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request) HYDRAULIC FILTRATION F4-DMD series In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1..1): F4-DMD/8/11: 7 bar (11 psi) F4-DMD1/3/4: 4 bar (8 psi) Housing Burst

More information

FF 20 DIAPHRAGM PUMP INSTALLATION INSTRUCTIONS

FF 20 DIAPHRAGM PUMP INSTALLATION INSTRUCTIONS FF 20 INSTALLATION INSTRUCTIONS DIAPHRAGM PUMP FF 20 DCB-4 FF 20 DC-M Before operating the pump and the accessories, please read the Installation Instructions and safety precautions. Installation Instructions

More information

Safety. Operating instructions Solenoid valve for gas VG 6 VG 15/10 DANGER. Contents WARNING CAUTION. Changes to edition 07.15

Safety. Operating instructions Solenoid valve for gas VG 6 VG 15/10 DANGER. Contents WARNING CAUTION. Changes to edition 07.15 17 Elster GmbH Edition 1.17 Translation from the German 519 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Solenoid valve for gas VG VG 15/1 Contents Solenoid valve for gas

More information

Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm

Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing

More information

Connection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)

Connection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request) HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to

More information

Operating Instructions Garlock Butterfly Valves DN : mm / 2-24

Operating Instructions Garlock Butterfly Valves DN : mm / 2-24 Operating Instructions Garlock Butterfly Valves DN : 50-600 mm / 2-24 PN : 10 / 16 Type: GAR-SEAL SAFETY-SEAL STERILE-SEAL MOBILE-SEAL Conformity declaration... 14 0 Introduction... 15 1 Proper use...

More information

Pressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)

Pressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi) HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:

More information

Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)

Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request) HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to

More information

Mounting and Operating Instructions EB 8091 EN. Pneumatic Control Valve Type and Type Type with 120 cm 2 actuator

Mounting and Operating Instructions EB 8091 EN. Pneumatic Control Valve Type and Type Type with 120 cm 2 actuator Pneumatic Control Valve Type 3510-1 and Type 3510-7 Type 3510-1 with 120 cm 2 actuator Type 3510-7 with 120 cm 2 actuator and integrated positioner Type 3510-1 with 60 cm 2 actuator Fig. 1 Pneumatic control

More information

Series 42 Self-operated Regulators. Type RS Check Valve (backflow protection)

Series 42 Self-operated Regulators. Type RS Check Valve (backflow protection) Series 42 Self-operated Regulators Type 42-10 RS Check Valve (backflow protection) Application Designed to protect nitrogen and compressed air networks against backflow from directly connected systems.

More information

Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T )

Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T ) HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T 3.10.5.1) Burst 840 bar (12200 psi) (acc. to NFPA T 3.10.5.1) Housing

More information

Operating and Installation Instructions Diaphragm Vacuum Pumps and Compressors

Operating and Installation Instructions Diaphragm Vacuum Pumps and Compressors Operating and Installation Instructions Diaphragm Vacuum Pumps and Compressors Type range: UN813.3ANI UN813.4ANI UN813.3ANDCB UN813.4ANDCB UN813.5ANI Fig. 1: UN813.3ANI Fig. 2: UN813.4ANI You have selected

More information

Control block VOFA with safety function

Control block VOFA with safety function Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,

More information

A408 GB. Pneumatic oil and diesel pumps 1:1

A408 GB. Pneumatic oil and diesel pumps 1:1 03 594 A408 GB Pneumatic oil and diesel pumps 1:1 G Operating instructions for Pneumatic oil and diesel pump 1:1 Contents 1. General details 2 1.1 Intended use 2 1.2 Design and functional description 2

More information

Hygienic butterfly valves VZFB

Hygienic butterfly valves VZFB Product range overview Version Type Based on standard Nominal width DN Process valve nominal pressure PN With clamp CC VZFB-A ASME BPE 1 10 4 1½ 2 2½ 3 4 Page With welded end WW VZFB-D DIN 11851 DN25 10

More information

Connection Ports: 3/4 1 1/4 BSP (other thread options on request)

Connection Ports: 3/4 1 1/4 BSP (other thread options on request) HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to

More information

back to main page Type: Butterfly valves Instructions and Operation Manual Warning! Warning! Danger for life! 1. Intended use Danger for life!

back to main page Type: Butterfly valves Instructions and Operation Manual Warning! Warning! Danger for life! 1. Intended use Danger for life! Instructions and operation manual for butterfly valves This manual is intended to support the users of Herberholz butterfly valves type HRD/HRA, RD/RA, LDKE/LDKF for installation, operation and maintenance

More information

EN Operating manual. Motorised zone valve. Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3

EN Operating manual. Motorised zone valve. Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3 EN Operating manual Motorised zone valve Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3 This manual ensures safe and efficient use of the 3PV2 or 3PV8 force-actuated three-way valve with spring-loaded return

More information

These installation and maintenance instructions must be read in full and completely understood before the installation!

These installation and maintenance instructions must be read in full and completely understood before the installation! These installation and maintenance instructions must be read in full and completely understood before the installation! 1. General information on the installation and maintenance instructions These instructions

More information

User Guide. Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC)

User Guide. Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC) User Guide Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC) version 04/2013 Content General Information 3 Warning 3 Scope of Supply 3 Overview 3 General safety details 4 Intended use 4

More information

Solenoid Valve DF-SB-series

Solenoid Valve DF-SB-series 2/2-WAY SEMI-DIRECT OPERATED NORMALLY OPEN Solenoid Valve DF-SB-series The DF-DB is a semi-direct operated 2/2-way solenoid valve. The valve is normally open. The solenoid valves have an orifice of 16

More information

Series 250 Pneumatic Control Valves Type and

Series 250 Pneumatic Control Valves Type and Series 250 Pneumatic Control Valves Type 3252-1 and 3252-7 Fig. 1 Type 3252 High-pressure Valve with Type 3277 Pneumatic Actuator and Type 3767 i/p Positioner Edition November 1998 Mounting and operating

More information

VQ400M SERIES CLASS A COMBINATION VALVES PRODUCT HANDBOOK APPLICATION

VQ400M SERIES CLASS A COMBINATION VALVES PRODUCT HANDBOOK APPLICATION VQ400M SERIES PRODUCT HANDBOOK APPLICATION The VQ400M Series class A safety combination valves are used for control and regulation of gaseous fluids in gas power burners, atmospheric gas boilers, melting

More information

Catalyser Introduction. 3. Hazard Information. 2. Area of Application. 3.1 Symbology

Catalyser Introduction. 3. Hazard Information. 2. Area of Application. 3.1 Symbology ENGLISCH Catalyser 2300-0001 1. Introduction We are pleased with your decision to purchase the Catalyser. Please read the following operating instructions carefully and observe the safety information they

More information

Positioners CMSX. Festo core product range Covers 80% of your automation tasks

Positioners CMSX. Festo core product range Covers 80% of your automation tasks Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

Solenoid Valve ST-IA-series

Solenoid Valve ST-IA-series 2/2-WAY INDIRECT OPERATED NORMALLY CLOSED Solenoid Valve ST-IA-series The ST-IA is an indirect operated 2/2-way solenoid valve. The valve is normally closed. The solenoid valves have an orifice of 13 to

More information

Pneumatic components for high-pressure applications

Pneumatic components for high-pressure applications Pneumatic components for high-pressure applications Pneumatic components for high-pressure applications, series L Product range overview Function Version Type Size Pneumatic connection 1, 2 Page Direct

More information

By-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane

By-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Type 6027 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating instructions contain

More information

Assembly instructions

Assembly instructions Assembly instructions CP-Lube kit RX4,RX8,RX22,RX25,RX29,RX45,RX53 CP-Lube kit RX 4 CP-Lube kit RX 8 CP-Lube kit RX 22 CP-Lube kit RX 25 CP-Lube kit RX 29 CP-Lube kit RX 45 CP-Lube kit RX 53 Valid from

More information

Swing Piston Compressors and Vacuum Pumps

Swing Piston Compressors and Vacuum Pumps Swing Piston Compressors and Vacuum Pumps NPK 050 NPK 0100 Operating and Installation Instructions Read and observe these Operating and Installation Instructions! KNF Neuberger GmbH Alter Weg 3 D-79112

More information

Starting up hydraulic systems

Starting up hydraulic systems General / Installation A hydraulic system that operates economically, safely, and trouble-free requires careful planning, as well as proper installation and start-up. Conscientious maintenance has a considerable

More information

Operating Instructions: Hand-operated, PTFE-lined butterfly valves, Series 22/23

Operating Instructions: Hand-operated, PTFE-lined butterfly valves, Series 22/23 0 Introduction These instructions are intended to assist users of BRAY PTFE-lined butterfly valves, Series 22/23 in fitting, operating and servicing valves. Risks may arise and the manufacturer's warranty

More information

Mounting and Operating Instructions EB 8222 EN. Type 3310/AT and Type 3310/3278 Pneumatic Control Valves. Type 3310 Segmented Ball Valve

Mounting and Operating Instructions EB 8222 EN. Type 3310/AT and Type 3310/3278 Pneumatic Control Valves. Type 3310 Segmented Ball Valve Type 3310/AT and Type 3310/3278 Pneumatic Control Valves Type 3310 Segmented Ball Valve Fig. 1 Type 3310/3278 with positioner Fig. 2 Type 3310/AT Mounting and Operating Instructions EB 8222 EN Edition

More information

Solenoid valves VZWF, force pilot operated

Solenoid valves VZWF, force pilot operated q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Mounting and Operating Instructions EB 5894 EN. Electric control valves with jet pump. Flanged version of valve with jet pump

Mounting and Operating Instructions EB 5894 EN. Electric control valves with jet pump. Flanged version of valve with jet pump Electric control valves with jet pump Type 3267/5824, Type 3267/5825, Type 3267/3374, Type 3267/3274 Pneumatic control valves with jet pump Type 3267-1, Type 3267-7 Flanged version of valve with jet pump

More information

Mounting and Operating Instructions EB 5863 EN. Electric Control Valves. Pneumatic Control Valve

Mounting and Operating Instructions EB 5863 EN. Electric Control Valves. Pneumatic Control Valve Electric Control Valves Types 3226/5857, 3226/5824, 3226/5825, 3226/5757-7, 3226/5724-8, 3226/5725-7, 3226/5725-8 Pneumatic Control Valve Type 3226/2780 Type 3226/5857 Type 3226/5757-7 Type 3226/2780-2,

More information

Solenoid Valve ST-SA-series

Solenoid Valve ST-SA-series 2/2-WAY SEMI-DIRECT OPERATED NORMALLY CLOSED Solenoid Valve ST-SA-series The ST-SA is a semi-direct operated 2/2-way solenoid valve. The valve is normally closed. The body material can be brass or stainless

More information

Assembly and Maintenance Manual Type ASNU

Assembly and Maintenance Manual Type ASNU Assembly and Maintenance Manual Type ASNU Hatschekstr.36 69126 Heidelberg Germany Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 30.05.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\_ASNU.docx

More information

Operating manual Separator

Operating manual Separator Operating manual Separator Sheet no. AS/4.1.141.1.1 issue 20.08.2014 Contents Section Title Page 0 Introduction... 1 1 Intended use......1 2 Marking of the fitting... 1 3 Safety instructions... 2 4 Transport

More information

Type /2-way globe valve 2/2-Wege-Geradsitzventil Vanne à siège droit 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation

Type /2-way globe valve 2/2-Wege-Geradsitzventil Vanne à siège droit 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 2/2-way globe valve 2/2-Wege-Geradsitzventil Vanne à siège droit 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation We reserve the right to make technical changes without notice.

More information

Series 240 Type 3351 Pneumatic On/off Valve

Series 240 Type 3351 Pneumatic On/off Valve Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating

More information

Standard valves to ISO Product range overview

Standard valves to ISO Product range overview Standard valves to ISO 15218 Product range overview Function Electrical connection Voltage Manual override Page/Internet Pilot valve to ISO 15218 Width 15 mm Plug connector type C, to EN 175301-803 Plug

More information

Globe Valve Type Fig. 1 Type 3241 Globe Valve. Mounting and Operating Instructions EB EN

Globe Valve Type Fig. 1 Type 3241 Globe Valve. Mounting and Operating Instructions EB EN Globe Valve Type 3241 Fig. 1 Type 3241 Globe Valve Mounting and Operating Instructions EB 8015-1 EN Edition July 2012 Contents Contents Page 1 Design and principle of operation.................... 4 2

More information

Mounting and Operating Instructions EB 8097 EN. Pneumatic Control Valves Type and Type

Mounting and Operating Instructions EB 8097 EN. Pneumatic Control Valves Type and Type Pneumatic Control Valves Type 3347-1 and Type 3347-7 Hollow-mold cast body with welding ends Full-mold cast body with threaded connections Fig. 1 Type 3347-7 Control Valve with Type 3277 Actuator and integral

More information

Solenoid Valve DF-SA-series

Solenoid Valve DF-SA-series 2/2-WAY SEMI-DIRECT OPERATED NORMALLY CLOSED Solenoid Valve DF-SA-series The DF-DA is a semi-direct operated 2/2-way solenoid valve. The valve is normally closed. These valves have an orifice of 16 to

More information