SUNRAIN SOLAR HEAT PIPE COLLECTOR TZ58/1800- R SERIES

Transcription

1 SUNRAIN SOLAR HEAT PIPE COLLECTOR TZ58/1800- R SERIES

2 Welcome to the SUNRAIN Vaccum Tube Solar Collector! Vacuum tube solar collectors are amongst the most efficient and most costly types of solar collectors. These collectors are best suited for moderate temperature applications where the demand temperature is 50-95C. Vacuum tube solar collectors have a selective absorber for collecting sunlight that is in vacuum-sealed tube, so the thermal losses are very low even in cold climates. Applications of vacuum tube collectors include heating of domestic and commercial hot water, buildings, and indoor swimming pools. Due to their ability to deliver high temperatures efficiently another potential application is for the cooling of buildings by regenerating refrigeration cycles. Our solar collector has been manufactured to the very highest standards, and will provide you with many years of service, with the minimum of maintenance required. This brochure explains how it works, and provides information of a solar water heating installation. Before assembly and installation, please read this brochure carefully.

3 CONTENTS 1. STRUCTURE 2. COMPONENTS 3. TECHNICAL DATA 4. PACKING DETAIL 5. MOUNTING ROOF BRACKET SYSTEM 6. COLLECTOR DIMENSION 7. WARRANTY 8. COLLECTOR IN SYSTEM 9. PROJECT SUGGESTION 10. CONTACT INFORMATION

4 1. STRUCTURE TZ58/ R TZ58/ R WITH STAND TZ58/ R TZ58/ R WITH STAND R1 series R2 series

5 2. COMPONENTS VACUUM TUBE 58/1800mm, selective absorber AL/N-AL

6 HEAT PIPE, SILICON COTTON STOPPLE AND ALUMINUM FIN dia. 24mm, length 9mm, copper MANIFOLD Aluminum 1 INSULATION CFC Polyurethane foam & Rock Wool TAIL STOCK ABS Plastic (UV stabilized) FRAME STAND (OPTIONAL) Aluminum or Stainless steel 304, 30 or 45

7 3. TECHNICAL DATA TZ R TZ R TZ R TZ R TZ R Total area m m m m m2 Collector m m m m m depth Aperture m m m m m2 area Absorber m m m m m2 area Weight 39.6 kg 54.8 kg 73 kg 91.5 kg 106 kg empty Volume of the fluid 0,7 l (MS) 1,065 l (MS) 1,4 l (MS) 1.85 l (MS) 2,3 l (MS) Efficiency Curve The calculated parameters are based on following areas: aperture area of m absorber area of m : η 0a = η 0A = a 1a = W/m 2 K a 1A = W/m 2 K a 2a = W/m 2 K 2 a 2A = W/m 2 K 2

8 4. PACKING DETAIL TZ58/ , 25, 30R with flat roof stand (For example 25R) NAME All-Glass Evacuated Solar Collector Tube (with heat pipe) Solar Collector with heat pipe (with stand) Solar Collector Frame (with stand) DESCRIPTION 15 PCS/CTN 1 SET/CTN 1 Manifold header, 25 tail stocks, 1 tail stock track, 3 back support bars, 3 joints 1 SET/CTN 3 front tracks, 3 rear tracks, 3 up bars, 3 bottom assistant bars, 4 cross bars TZ58/ , 25, 30R without flat roof stand (For example 25R) NAME All-Glass Evacuated Solar Collector Tube (with heat pipe) DESCRIPTION 15 PCS/CTN Solar Collector with heat pipe 1 SET/CTN 1 Manifold header, 25 tail stocks, 1 tail stock track, 3 back support bars, 3 joints TZ58/ , 15R with flat roof stand (For example 15R) NAME All-Glass Evacuated Solar Collector Tube (with heat pipe) DESCRIPTION 15 PCS/CTN Solar Collector with heat pipe (with stand) Solar Collector Frame (with stand) 1 SET/CTN 1 Manifold header, 15 tail stocks, 1 tail stock track, 3 back support bars, 2 joints 1 SET/CTN 2 front tracks, 2 rear tracks, 2 up bars, 2 bottom assistant bars, 2 cross bars

9 TZ58/ , 15R without flat roof stand (For example 15R) NAME All-Glass Evacuated Solar Collector Tube (with heat pipe) Solar Collector with heat pipe DESCRIPTION 15 PCS/CTN 1 SET/CTN 1 Manifold header, 15 tail stocks, 1 tail stock track, 3 back support bars, 2 joints

10 5. MOUNTING ROOF BRACKET INSTALLATION

11 6. COLLECTOR DIMENSIONS 10R 15R 20R 25R 30R 2010*854*189 mm 2010*1275*189 mm 2010*1680*189 mm 2010*2050*189 mm 2010*2420*189 mm

12 7. COLLECTOR IN SYSTEM

13 8. PROJECT SUGGESTION Pressure Drop Sample Project

14 Swimming pool

15 9. WARRANTY No liability is accepted for incorrect use, unauthorized changes to the assembly components, or the resulting con-sequences. The warranty for the collector lasts for 3years and 1 years for the accessories. All information and instructions in this manual refer to the current state of development. Please always use the respective assembly instructions supplied with the collectors. Figures and illustrations used. Due to the possibility of setting and printing errors, and to the need for continuous technical change, please understand that we cannot accept liability for the correctness of the data. The current version of the General Terms of Business applies. All photographs used are for illustrative purposes only. These assembly instructions contain proprietary information protected by copyright laws. All rights and changes to these assembly instructions are reserved.

16 10. CONTACT INFORMATION JIANGSU SUNRAIN SOLAR ENERGY CO., LTD. Ninghai Industry Zone, Lianyungang, China Contact: Eddy Cheng Tel: , Fax: Web: