LED AR111 Instruction Manual

Transcription

1 LED AR111 Instruction Manual *Technical Information* The alternative LED module to AR111 halogen reflector lamps 50/75W Tender text Designed to fit into standard AR111 fixture Use 6 high power LEDs Available in warm white and cold white in combination with fine-binning Integrated heat sink Suitable for down-, spot- and track lighting with 25 or 45 or 60 beam angle Best efficiency in combination with CREE LEDs. (Mode No.CRE). Subject to modification Page 1 of 6

2 1. Housing, mounting and accessories: Aluminum housing which also takes the heat sink function Ø111 x 65 (H), Ø111 at light source Housing design according to the IP standards in the application LED module itself and all its components may not be mechanical stressed Body material Aluminum 6063 Connector Reflector material Inner Cover material PC G53 PC with PMMA PC Height h [mm] 65 Diameter d [mm] 111 Mechanical suspension of bracket Comply with IEC (section 4) Weight [g] 145 Light Source Color Rendering Luminous Flux Radiator 6*2W CREE 80 Ra 790/630lm Special Stamping Radiator- Fin Efficiency Tc point. Ambient temperature ta [ C] Storage temperature tstg [ C] Operation temperature tc [ C] ºC (ta in free air) ºC (measure at Tc point) ºC (measure at Tc point) Subject to modification Page 2 of 6

3 2. Installation: Installation of LED modules with power supplies needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Assembly must not damage or destroy conducting paths on the circuit board. Correct electrical polar ity needs to be observed. Wrong polarity may destroy the module and will result in no light emission. Parallel connection is highly recommended as safe electrical operation mode. Electronic in series connection is forbidden. Pay attention to standard ESD precautions when installing the module. Damage by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. Pay attention not to exceed the maximum operation temperature 70 C at Tc point when the modules are used in enclosed environment. Typical wattage [W] 12 Maximum wattage [W] 13 Rated voltage [V] ESD protection AC/DC 12V Contact 4kV nonpolarity Subject to modification Page 3 of 6

4 3. Products Information: Advantages: 1). Can be dimmable as per customer s requirement; 2). Advanced constant current driver. 3). Professional thermal management. 4). Instant on, no warm up time required. 5). No noise, no flickering. 6). No UV or IR radiation in the beam, mercury free. 7). Anti-shock, anti-moisture. 8). Long life span, higher than 30,000H. 9). CE, RoHS certificate. Description: AR111 is an exceptionally high performance LED lamp built to last. It is a premium quality solid state lighting product precisely engineered and manufactured with state of the art technologies and materials. Proprietary driving circuit enables AR111 to replace traditional incandesce nt/halogen lamp, up to 75 Watt, directly without additional modification or transformer. Application: AR111 LED lamp are the ideal lighting sources for the advertising board, the show Board outside the bar and the hotel, the outlook of the wall of building, the lighting project for the resorts, the decoration of stage,home decoration, coffee, house, etc. Note: 1). All the above items are under factory standard warranty. 2). All the shape, size, color, brightness is available here and OEM and ODM is welcome. Subject to modification Page 4 of 6

5 4. Test Report: Xiamen Top-Succeed Electronics Technology Co., Ltd. Subject to modification Page 5 of 6

6 5. Packing: 6. Contact Information: Xiamen Top-Succeed Electronics Technology Co., Ltd. ADD: 8# No.2 Xinfeng Road Torch HI-TECH Zone Xiamen China Contact: Mila TEL: FAX: Mobile: Skype:mxsales568 MSN: Subject to modification Page 6 of 6