Solid State T8 tube is the smart alternative to a

Size: px

Start display at page:

Download "Solid State T8 tube is the smart alternative to a"

Marcus Butler
5 years ago
Views:

Solid State T8 tube Ideal for decorative and ambient lighting in retail outlets, hotels, restaurants,

tube lamp T8 4ft (T8 tube compatible for the traditional ballast tube) Solid State T8 tube is the

The unique tube design provides omni-directional with only 10/15/20 watts of power High efficacy

virtually no UV/IR light in the beam Contains no mercury Unsurpassed light uniformity Easy to

1 Solid State T8 tube Ideal for decorative and ambient lighting in retail outlets, hotels, restaurants, government buildings, and multi-unit residences L Prize Winner Solid State T8 tube Direct Replacement tube lamp T8 4ft (T8 tube compatible for the traditional ballast tube) Solid State T8 tube is the smart alternative to a standard 18/27/36 watt incandescent T8 fluorescent lamp. The unique tube design provides omni-directional with only 10/15/20 watts of power High efficacy accent light 30,000-hour rated average life Superior color rendering with 80CRI Instant-on light Emits virtually no UV/IR light in the beam Contains no mercury Unsurpassed light uniformity Easy to experience Offers omni-directional light for ambient illumination 5-year limited warranty It's not necessary to remove the ballast and starter

Solid State T8 tube Product specification (Subject to change without notice) Item Power MOL Number (watts) Dimension (Inches) Light base IP Grade Certification Warranty LT-TUA-010-A 10W Dia.

26 x 1212mm 48 G13 Electrical and Technical Data (Subject to change without notice) View Rated Color Item Power Input Input Avg. Life Approx. Temp.

9 30,000 1500lm Min.80 2600-7000 LT-TUA-020-A 20W 100-277V 50-60 170 >0.9 30,000 2000lm Min.

2 Solid State T8 tube Product specification (Subject to change without notice) Item Power MOL Number (watts) Dimension (Inches) Light base IP Grade Certification Warranty LT-TUA-010-A 10W Dia.26 x 605mm 24 G13 LT-TUA-015-A 15W Dia.26 x 906mm 36 G13 LT-TUA-020-A 20W Dia.26 x 1212mm 48 G13 Electrical and Technical Data (Subject to change without notice) View Rated Color Item Power Input Input Avg. Life Approx. Temp. Number (watts) Voltage Frequency (Hz) Angle PF (Hours) Lumens CRI (Kelvin) LT-TUA-010-A 10W V >0.9 30, lm Min LT-TUA-015-A 15W V >0.9 30, lm Min LT-TUA-020-A 20W V >0.9 30, lm Min Input Current ma 100/36 150/54 200/72 Shipping Data (Subject to change without notice) Item Number Net Weight (g) Inner box Dimensions (L x W x H) (mm) Carton Dimensions (L x W x H) (mm.) Qty. of Per Carton Per Carton Gross Weight (KG) Approx. Qty. of per 20' container (pcs.) Approx. Qty. of per 40' container (pcs.) LT-TUA-010-A x 45 x x 300 x pcs LT-TUA-015-A x 45 x x 300 x pcs LT-TUA-020-A x 45 x x 300 x pcs Luminance Distribution (Subject to 1200mm tube 170 view angle)

Quick Installation Guide Solid State T8 tube Energy Saving Data Energy Effciency, Reducing carbon dioxide emissions Estimated Lighting

Annual Operating Hours 3,000 hrs = 60,000 watt-hours 1,000 = 60 kwh per year x kwh rate of $0.11 = $6.

7% Reducing carbon dioxide emissions: 6 ton CO2 /year Based on 100 lamps per space operating at 3,000 hours per year.

year at a cost of $0.11 per kwh. Your actual savings may vary depending on the energy costs in your geographic location.

3 Quick Installation Guide Solid State T8 tube Energy Saving Data Energy Effciency, Reducing carbon dioxide emissions Estimated Lighting Costs Using a 36W Fluorescent Lamp Present Wattage 40 W x Annual Operating Hours 3,000 hrs = 120,000 watt-hours 1,000 = 120 kwh per year x kwh rate of $0.11 = $ 13.2 per year x 100 lamps per space = $ 1320 annual energy cost per space Estimated Lighting Costs Using a 20W T8 tube Present Wattage 20 W x Annual Operating Hours 3,000 hrs = 60,000 watt-hours 1,000 = 60 kwh per year x kwh rate of $0.11 = $6.6 per year x 100 lamps per space = $660 annual energy cost per space Total Estimated Annual Savings = $660 Energy saving rate: 66.7% Reducing carbon dioxide emissions: 6 ton CO2 /year Based on 100 lamps per space operating at 3,000 hours per year. This energy saving example shows an application of 100 tubes in a space currently using 100 incandescent 36W, operating 3,000 hours per year at a cost of $0.11 per kwh. Your actual savings may vary depending on the energy costs in your geographic location. Replacing 100 standard incandescent 36W fluorescent tubes with the 20W This T8 tube can provide significant energy cost savings of $660 per year! Potential savings from the reduction savings from the reduction in HVAC costs as a result of using a lower wattage bulb that emits less heat is an additional benefit not included in this example.

Instructions Please take the time to read this quick installation guide.

The LED T8 Tube Specifier Series. T8 Tube Specifier Series are suitable to replace either.

"Compatible for the traditional ballast tube.

Retrofit Luminaire with One Tube Other tube wiring diagram (Retrofit is MUST) Repl ace

$Repeat steps 1 to 3 for each additional bulb\ ballast based on illustration below.$ Luminare Description 1. This tube is suitable to be installed in T8 standard luminaries. 2.

Luminare Description 1. This tube is suitable to be installed in T8 standard luminaries. 2.

4 Instructions Please take the time to read this quick installation guide. The guide contains important information and notes regarding the installation and operation of The LED T8 Tube Specifier Series. T8 Tube Specifier Series are suitable to replace either. During replacing, rewiring is NOT necessary, please follow the installation steps. "Compatible for the traditional ballast tube." Traditional fluorescent tube and This solid state tube wiring diagram (Do NOT any retrofit) Retrofit Luminaire with One Tube Other tube wiring diagram (Retrofit is MUST) Repl ace Instructions 1. Remove diffuser (if applicable) and fluorescent tube. 2. Need NOT retrofit all wires which connected to ballast. 3. Install This tube directly. 4. Repeat steps 1 to 3 for each additional bulb\ ballast based on illustration below. Luminare Description 1. This tube is suitable to be installed in T8 standard luminaries. 2. Ensure all parts and accessories are in the package, included instruction, filed- applied label and tubular lamp. 3. Please make sure the existed luminaire dimension is large enough to replace This tube. Retrofit Luminaire with Two Tubes and one ballast Retrofit Luminaire with Three/Four Tubes and one ballast Retrofit Luminaire with Three/Four Tubes and two ballasts "Compatible for the traditional ballast tube."

WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF

5 WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 1. Risk of fire or electric shock. The electrical rating of these products are 100~277V, the installer must determine whether they have 100~277V at the luminaire before installation. 2. Risk of fire or electric shock. Luminaires wiring, ballasts, or other electrical parts may be damaged when installing of reflector kit hardware. Check for enclosed wiring and components. 3. Risk of fire or electric shock. Reflector kit installation requires knowledge of fluorescent lighting luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. 4. Risk of fire or electric shock. Install this kit only in the luminaires that has the construction features and dimensions shown in the photographs and/or drawings. 5. To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. 6. Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation DANGER-RISK OF SHOCK-DISCONNECT POWER BEFORE INSTALLATION. CAUTIONS: 1. Suitable for dry and damp locations. 2. Do not use with Dimmers. 3. Not for use in totally enclosed luminaires. 4. This device is not intended for use with emergency exit fixtures or emergency lights. 5. Before replacing, turn off power and let lamp cool to avoid electrical shock or burn. 6. Risk of electric shock. Do not use where directly exposed to water. 7. This device is not intended for use with emergency exits. 8. Lamps must be operated within an ambient fixture temperature of -22F (-30c) and 113F (45c) co comply with all safety and warranty regulations. Light and Energy International Sparks, NV USA

T8 Tube Light. UL LISTED & cul LISTED & DLC LISTED. Germany Patent: Gebrauchsmusters / Nr

T8 Tube Light. UL LISTED & cul LISTED & DLC LISTED. Germany Patent: Gebrauchsmusters / Nr T8 Tube Light Ideal for decorative and ambient lighting in retail outlets, hotels, warehouses, government buildings, and multi- unit residences T8 Tube Light UL LISTED & cul LISTED & DLC LISTED Germany