Technical Application Guide for UP-SHINE LED Tube Light

Transcription

1 Technical Application Guide for UP-SHINE LED Tube Light UP-T836W24-R

2 Introduction Up-shine AL+PC LED Tube light adopts LM SMD LED with high brightness and slight light decay..8mm thickness AL663 aluminum acting as cooling system provides excellent heat dissipation. Clear or frosted cover provided. V fire-rated PC cover, up to 95% light transmittance. Reliable isolated driver solutions with 375V voltage withstand, branded high quality capacitor and IC solution ensures excellent working performance. Up to 7% energy saving compared to traditional tube Long lifetime of 4, hours 12 wide beam angle 24mm length CCT: 3K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas Suitable for commercial and residential applications like offices, supermarkets, shops, schools, hotels, restaurants, workshop, warehouse, homes etc. Certificates

3 Product Information Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-T836W24-R AC1-24V 36W o 3K 4h 8 No L2388*W28.5*H32.3mm UP-T836W24-R AC1-24V 36W o 4K 4h 8 No L2388*W28.5*H32.3mm UP-T836W24-R AC1-24V 36W o 5K 4h 8 No L2388*W28.5*H32.3mm UP-T836W24-R AC1-24V 36W o 57K 4h 8 No L2388*W28.5*H32.3mm Driver data Sheet Driver data Non-dim Input rated Voltage Frequency Input Voltage AC1-24V 5/6Hz AC85-265V Efficiency 88% Total load Wattage 36W±5% Power Factor.9 Rated input current Full load output Voltage Rated output current Output current range.42a DC35-38V 85mA 85mA±5% Tolerance ±5% Current output tolerance ±5% Short circuit protection Over voltage protection Over temperature protection Withstand voltage AC375V Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 36W Ⅱ IP2-2 o C~45 o C ~9% -2 o C~65 o C

4 Polar Diagram Comparison -15 O +/-18 O 15 O -12 O 12 O -9 O 9 O O 18 6 O 24-3 O 3 3 O O AVERAGE BEAM ANGLE (5%): 123.8DEG UNIT: cd C/18, deg C3/21, 13.6 deg C6/24, deg C9/27, 19.7 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decat Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) :59:47 2:32:4 21:5:4 21:38:4 22:11:4 22:44:4 23:17:4 :23:4 :56:4 1:29:4 2:2:4 2:35:4 3:8:4 4:14:4 5:2:4 5:53:4 6:26:4 7:32:4 8:5:4 8:38:4 Time IC Capacitor MOS PCB Voltage transformer Environmental temperature The driver lifespan is based on capacitor working temperature.

5 Installation 1. One end power tube, installation with 1-24Vac 1-24Vac 1-24Vac Step 1 Step 2 Step 3 2. One end power tube,installation with Inductive Ballast Inductive Ballast Remove the inductive ballast or not 1-24Vac 1-24Vac Remove the fluorescent starter 1-24Vac Fluorescent starter Step 1 Step 2 Step 3 3. Two end power tube, installation with Step 1 Step 2 Step 3 4. Two end power tube, installation with Inductive Ballast Inductive Ballast Remove the inductive ballast or not Connect the wire if the inductive ballast is removed Fluorescent starter Remove the Fluorescent starter Step 1 Step 2 Step 3 Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 249.8*21* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China