Making the World a Better Place

Size: px

Start display at page:

Download "Making the World a Better Place"

Dwight Austin
5 years ago
Views:

1 Making the World a Better Place

Solar Water Heater Flat Plate Come in different sizes vis. AR-9 (9 fins collectors in Copper/Alluminium) and AR-0 (0 fins collectors in Copper/Alluminium) each to suit different sites.

Arinna AR9 Specifications: Collector Frame Gasket for Glass (Beeding) Glazing (cover) Casing Insulation Thickness Bottom Insulation Side Insulation Collector Back Sheet Absorber Plate Absorber

mm 5mm PU + 0mm glass wool Polypropylene Sheet 0.5mm Copper Selective NALSUN Copper : Ø.7mm x t0.56±0.05mm Copper : Ø 5.mm x t 0.7±0.05mm pcs Aluminium EPDM Rubber.

sections with SS fasteners, 00% leak proof, Minimum heat loss (almost 0%) High transmissivity, Toughened & tempered glass, Moulded edges, Collector Box PUF & Glass Wool insulated, Brass Connectors

AR-09AlFPC Type Solar Collector with Brass Adopter Union Type Arinna AR0 Specifications: Collector Frame Gasket for Glass (Beeding) Glazing (cover) Casing Insulation Thickness Bottom Insulation Side

performance to ensure maximum benefits. UNIQUE Absorber Plate -Copper fins ultrasonically welded to copper tubes.

UNIQUE No Corrosion features The underside of the collectors is made of polypropylene to prevent possibility of corrosion.

UNIQUE brass connectors to inter-connect collectors instead of Flanges where rubber gaskets need to be replaced over a period of time. Collector Size :.7 sq.mtr. Absorber area :.0 sq.mtr No.

2 Solar Water Heater Flat Plate Come in different sizes vis. AR-9 (9 fins collectors in Copper/Alluminium) and AR-0 (0 fins collectors in Copper/Alluminium) each to suit different sites. All above collector sizes have been duly approved by the Bureau of Indian Standards. Arinna AR9 Specifications: Collector Frame Gasket for Glass (Beeding) Glazing (cover) Casing Insulation Thickness Bottom Insulation Side Insulation Collector Back Sheet Absorber Plate Absorber Coating Riser Inlet Header Reflective Foil Grommet (sealing gasket) Fluid Content Extruded Aluminium,. mm thick EPDM - U type Toughened clear glass mm thick Aluminium Side Section.mm Glazing Section.mm 5mm PU + 0mm glass wool Polypropylene Sheet 0.5mm Copper Selective NALSUN Copper : Ø.7mm x t0.56±0.05mm Copper : Ø 5.mm x t 0.7±0.05mm pcs Aluminium EPDM Rubber.65 L Features (USP ARINNA Collectors): Aesthetically Designed & Engineered, Corrosion - resistant, Extruded alumn. sections with SS fasteners, 00% leak proof, Minimum heat loss (almost 0%) High transmissivity, Toughened & tempered glass, Moulded edges, Collector Box PUF & Glass Wool insulated, Brass Connectors instead of Flanges mm toughened Glass Part No. AR-09AlFPC Type Solar Collector with Brass Adopter Union Type Arinna AR0 Specifications: Collector Frame Gasket for Glass (Beeding) Glazing (cover) Casing Insulation Thickness Bottom Insulation Side Insulation Collector Back Sheet Absorber Plate Absorber Coating Riser Inlet Header Reflective Foil Grommet (sealing gasket) Fluid Content Extruded Aluminium,. mm thick EPDM - U type Toughened clear glass mm thick Aluminium Side Section.mm Glazing Section.mm 5mm PU + 0mm glass wool Polypropylene Sheet 0.5mm Copper Selective NALSUN Copper : Ø.7mm x t0.56±0.05mm Copper : Ø 5.mm x t 0.7±0.05mm pcs Aluminium EPDM Rubber.65 L Features (USP ARINNA Collectors): Aesthetically Designed & Engineered, Corrosion - resistant, Extruded alumn. sections with SS fasteners, 00% leak proof, Minimum heat loss (almost 0%) High transmissivity, Toughened & tempered glass, Moulded edges, Collector Box PUF & Glass Wool insulated, Brass Connectors instead of Flanges mm toughened Glass Part No. AR-0AlFPC Type Solar Collector with Brass Adopter Union Type Collector (FPC) AESTHETICALLY designed & engineered for strength and optimal performance to ensure maximum benefits. UNIQUE Absorber Plate -Copper fins ultrasonically welded to copper tubes. High efficient absorption rate of 95% UNIQUE Water Proof Construction UNIQUE case insulation - made of PU which toughens the case and prevents heat loss. UNIQUE No Corrosion features The underside of the collectors is made of polypropylene to prevent possibility of corrosion. UNIQUE Collector Insulation -ARINNA Collectors are insulated with Polyurethane and glass wool which gives an excellent performance and great mechanical strength. UNIQUE brass connectors to inter-connect collectors instead of Flanges where rubber gaskets need to be replaced over a period of time. Collector Size :.7 sq.mtr. Absorber area :.0 sq.mtr No. of Riser tubes per collector : 9 per collector No. of Absorber plate per collector : 9 per collector Absorptivity & Emissivity of : a > 95% - e < % absorber coating Cover transmission : > 86% Glass Size : 960 x 058 x.0 mm Thk. =.0768sq.mtr Absorber riser bonding : Ultrasonic/Laser welding Collector efficiency at ambient temp. : = 65% Finish Powder ( Coating) : Black for - frame : Black for - Glazing Working Pressure : 5 kg/cm Operating conditions : T?5 C Wind Velocity : 80 km/hr. (When mounted with steel structures and civil foundation as per RAF recommendation) Termination : -Nos of ¾ Outer Threads Brass Union Records with Adopter which is in Collector Assembly. Collector Size and Weight Size 99mmx090mmx9mm Collector Area :.7 sq.mtr. Absorber Area :.0 sq.mtr. Weight 5 Kgs (Dry) Collector Size :.5 sq.mtr. Absorber area :. sq.mtr No. of Riser tubes per collector : 0 per collector No. of Absorber plate per collector : 0 per collector Absorptivity & Emissivity of : a > 95% - e < % absorber coating Cover transmission : > 86% Glass Size : 960 x 8 x.0 mm Thk. =.sq.mtr Absorber riser bonding : Ultrasonic/Laser welding Collector efficiency at ambient temp. : = 65% Finish Powder ( Coating) : Black for - frame : Black for - Glazing Working Pressure : 5 kg/cm Operating conditions : T 5 C? Wind Velocity : 80 km/hr. (When mounted with steel structures and civil foundation as per RAF recommendation) Termination : -Nos of ¾ Outer Threads Brass Union Records with Adopter which is in Collector Size and Weight Size 99mmx60mmx9mm Collector Area :.5 sq.mtr. Absorber Area :.7 sq.mtr. Weight 9 Kgs (Dry) Different Variants: A. THERMOSIPHON SYSTEM (models available are as follows) Non pressurize without heat exchanger Non pressurized with heat exchanger?(good for hard water) Pressurized without heat exchanger Pressurized with heat exchanger?(good for hard water). B. FORCE CIRCULATION SYSTEM Recommended for 500 LPD system and above. Comes with circulation pump and control panel. Highly efficient systems. Controlled circulation of hot water.

Solar Water Heater Evacuated Tube Benefits & Features High quality tubes made from High quality PUF insulation for borosilicate glass

operate and cloudy days maintain Vacuum jacket insulation Works efficiently with hard water Heats water to a very high SS hot water storage tank

Evacuated Tube Collector is made of double layer borosilicate glass tubes evacuated for providing insulation.

This helps absorption of solar radiation and transfers the heat to the water which flows through the inner tube.

3 Solar Water Heater Evacuated Tube Benefits & Features High quality tubes made from High quality PUF insulation for borosilicate glass maintaining high temperature of No clogging/choking water inside the tank Long lasting Compact Better performance in winter and Easy to install, operate and cloudy days maintain Vacuum jacket insulation Works efficiently with hard water Heats water to a very high SS hot water storage tank temperature Powder coated GI stand Makes hot water available even Safe and environment friendly on partially cloudy days Collectors (ETC) ARINNA Evacuated Tube Collector is made of double layer borosilicate glass tubes evacuated for providing insulation. The outer wall of the inner tube is coated with selective absorbing material. This helps absorption of solar radiation and transfers the heat to the water which flows through the inner tube. ARINNA Designed the systems according to the requirement and the space of the installation location, Specially designed for hilly area where sun light is for limited hours. Specification for 58 mm diameter X800 mm length Three Layer Length : 800 MM Outer Tube Diameter : 58MM Inner Tube Diameter : 8 MM Glass Thickness :.6 MM Thermal Expansion :.X0-6 K Material : BOROSILICATE GLASS. Absorptive Coating : GRADED SS-C/CU Method Of Deposition : DC REACTIVE SPUTTERING Absorption : >9%(AM.5) Emmittance : <8%W/(800C) Vaccum : P<5X0-Pa Temperature : >600C Heat Loss : <0.8W/(M0C)

Insulated SS Hot Water Tank MOC SS 0 BIS approved SS 0/6 grade used Puff insulation from all sides Food grade polyflex coating to prevent corrosion Hygenic and safe Easy to install S.No.

Diesh Thickness 7" " 50" 57" 58" As per requirement N N N N N PX - MM PX - MM PX - MM PX - 5MM DOMESTIC TANKS S.No.

with dish & shell Dish Thickness PX - MM PX - MM Street Light The Solar Street Light system is specially designed for outdoor application in un-electrified remote rural areas as well as urban solar

4 Insulated SS Hot Water Tank MOC SS 0 BIS approved SS 0/6 grade used Puff insulation from all sides Food grade polyflex coating to prevent corrosion Hygenic and safe Easy to install S.No. 5 Volume 000L 500L 000L 000L 5000L Power coated cladding - AL/MS/SS Backup electric heating element Specifications: Polyflex coating INDUSTRIAL TANKS Diameter Height without Stand Shell Thickness Diesh Thickness 7" " 50" 57" 58" As per requirement N N N N N PX - MM PX - MM PX - MM PX - 5MM DOMESTIC TANKS S.No. Volume Diameter Height without Stand Shell Thickness 00L 00L 00L 500L 600 mm 700 mm 790 mm As per requirement 0 mm 0 mm 80 mm PX - MM 60 MM puf Insulation Ladder type heat exchanger SS inner tank with dish & shell Dish Thickness PX - MM PX - MM Street Light The Solar Street Light system is specially designed for outdoor application in un-electrified remote rural areas as well as urban solar electrification to conserve energy. This system is an ideal application for campus and village street lighting. The system is provided with battery storage backup sufficient to operate the light for - hours daily. The system is provided with automatic ON/OFF time switch for dusk to down operation and overcharge / deep discharge prevention cut-off with LED indicators. Solar Power Plants Solar power can be used in both large-scale applications and in smaller systems for the home. Businesses and industry can diversify their energy sources, improve efficiency and save money by choosing solar technologies for their electrical needs. Offgrid/Solar Power Packs/ Solar Retrofit Systems Capacity Range : KWp - 00 KWp (00 W - KWp also available on special request) Product Features Solar Standalone systems No dependency on Electricity Board / DG sets No running cost No noise pollution Reliable, sturdy and efficient Inverters & Controllers Minimum maintenance cost. Grid Connected System Capacity Range: 5 KWp - MW Product Features Green, Clean and Eco friendly Battery less Systems Power fed to Grid 0V Ph or 0V Ph or Kv Reliable, sturdy and efficient PCUs Negligible maintenance cost Highly efficient systems Integrated data, event and fault logging. Turnkey Projects The main solutions and value processes that we can offer you on solar PV power projects of MW scale are: Complete execution of turn key projects- Planning Engineering Project Management (Execution) Supervision Maintenance & Servicing Continuous monitoring of Plant s performance Plants Evaluation, Optimization & Improvements S. No Product Description S. No Product Description Watt CFL / 75AH Battery/ 75W SPV/ Pole, 6 5 Watt LED/75AH Battery/75W SPV/ Pole, Watt CFL ( Pc ) / 00AH Battery/ 0W SPV/ Pole, Battery Box, Mounting Str. & Wiring Accessories 7 8 Watt LED/75AH Battery/75W SPV/ Pole, 6 Watt LED/ 0 AH Battery/ 0W SPV/ Pole, 9 Watt LED/ 0 AH Battery/ 0W SPV/ Pole, 8 Watt LED/00AH Battery/00W SPV/ Accessories Pole, Battery Box, Mounting Str. & Wiring 6 Watt LED/50AH Battery/50W SPV/ Pole, 9 5 Watt LED/ 60AH Battery/ 60W SPV/ Pole, 0 50 Watt LED/00AH Battery/80W SPV/ Pole,

5 Certification & Achievements Plot No. 0, Sector, IMT Manesar, Distt. Gurgaon-050 (Haryana) INDIA Ph.: Fax: Website: Authorised Dealer Stamp

SHIV SHAKTI SOLAR POWER SYSTEMS INNOVATIVE PROFESSIONAL SOLUTION

SHIV SHAKTI SOLAR POWER SYSTEMS INNOVATIVE PROFESSIONAL SOLUTION SHIV SHAKTI SOLAR SOLAR WATER HEATER SOLAR PANELS SOLAR EPC 9001 : 2015 Company Profile Solar Power Systems is leading organization in the field of solar power systems since 2010. We are Expertise in Solar