Daikin. Magnitude Magnetic Bearing Compressor Centrifugal Chiller. WMC 125S, 145S, 200S 145D, 150D, 225D, 250D, 275D, 290D Vintage C

Transcription

1 Replacement Parts List No Revision F 10/2017 Daikin Magnitude Magnetic Bearing Compressor Centrifugal Chiller WMC 125S, 145S, 200S 145D, 150D, 225D, 250D, 275D, 290D Vintage C To find your Daikin Applied parts distributor, call or visit

2 Contents Parts List Revision History... 3 Complete Model Nomenclature Electrical Legend... 7 Unit Components Magnetic Bearing Compressor Piping - Discharge Piping - Liquid Line and Motor Cooling Piping - Part Load Balancing Valve Condenser- Dish Heads and Head Gaskets Condenser- Water Box Heads and Head Gaskets Condenser Insulation Evaporator- Dish Heads and Head Gaskets Evaporator- Water Box Heads and Head Gaskets Evaporator and Suction Insulation Unit Controls: Operator Interface Panel Unit Control Box Power Panel Control Box Label Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 2

3 Parts List Revision History Revision Date Description NEW 10/2014 New A 09/2015 Pages 4-6: Added Tube Counts to Codes 11 & 29, causing other codes to expand onto other pages. Page 34: Corrected description for p/n , was BACnet w/rs485 Ethernet. B 10/2015 Pages 18,19,21,22,24,25,27-30: Added note to contact D. A. for coated Heads. C 05/2016 Pages 4-6: Updated Model Nomenclature Codes 18, 60, 63, 68, 72, 73, 102. Pages 9 & 11: Added "CC revision #" to Note. Pages 36-38: Changed RLA Range values to 5 digit numbers. D 10/2016 Page 9: Added A050 Gasket. Added Code details for A050 Valve or Gasket. Updated p/n for H020 Flow Sensor, was Added H020 Flow Sensor Adapter. Added 5M label to H021 Cable. Added 10M Cable to H021. Page 15: Added Bubble 031 to diagram. Updated p/n for C044 Check Valve, was Page 17: Added new page for Part Load Balancing Valve. Page 24: Added new page for Condenser Insulation. Page 33: Updated all part numbers and quantities for Evap and Suction Insulation. E 05/2017 Page 6: Corrected heading for Codes 72 and 73. Page 9: Corrected p/n for H020 Flow Sensor, was Page 12: Added "SCR" to description for Diode Rectifier Kits. Pages 18-23: Removed Condenser Heads, consolidated Gasket information. Pages 25-32: Removed Evaporator Heads, consolidated Gasket information. Page 34: Corrected descriptions for Cables, added Power Cord. F 10/2017 Page 11: Updated part #s for Suction Temp Pr Sensor Kit, was ; and Discharge Temp Pr Sensor Kit, was Daikin Applied, Industrial Park Blvd., P.O. Box 1551, Minneapolis, MN (763) Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 3

4 Complete Model Nomenclature WMC 250D C SN H6 D D E2609 HB 2 C DK L 2 V C N C 4 Code etc. 02 Size (in nominal tons) 125S= 125 Tons, Single Compressor 145S= 145 Tons, Single Compressor 145D= 145 Tons, Dual Compressors 150D= 150 Tons, Dual Compressors 200D= 200 Tons, Single Compressor 225D= 225 Tons, Dual Compressors 250D= 250 Tons, Dual Compressors 275D= 275 Tons, Dual Compressors 290D= 290 Tons, Dual Compressors 03 Vintage C= Vintage C 04 Configuration SN= Single Refrigerant Circuit w/o Economizer 05 Compessor Size 13= Unit sizes 145D, 150D 14= Unit sizes 125S, 225D, 275D 15= Unit sizes 145S, 250D, 290D 25= Unit size 200S 06 Power Supply Voltage 00380= 380V 00400= 400V 00415= 415V 00460= 460V 00575= 575V 07 Power Supply Hertz H5= 50 Hertz H6= 60 Hertz 08 Always D 09 Compressor Model Revision D= Compressor Revision D 10 Evaporator Shell Diameter & Length E2209= 22" Diameter, 9' Length E2212= 22" Diameter, 12' Length E2609= 26" Diameter, 9' Length E2612= 26" Diameter, 12' Length 11 Evaporator Tube Configuration & Count 22" Evap Diameter HB=140 (3/4" all) RD=159 (3/4"=qty of 130, 1"=qty. of 29) UD=109 (3/4"=qty of 66, 1"=qty. of 43) YE=72 (1" all) 26" Evap Diameter HB=196 (3/4" all) RD=203 (3/4"=qty of 152, 1"=qty. of 51) TD=176 (3/4"=qty of 125, 1"=qty. of 51) UD=151 (3/4"=qty of 100, 1"=qty. of 51) YE=106 (1" all) 12 Evaporator Tube Thickness 2= = = Evaporator Tube Type C= Copper N= CuproNickel 90/10 14 Evaporator Tube Model 15 Evaporator Inlet Nozzle Location L= Left R= Right 16 Evaporator Water Passes 1= 1 Pass 2= 2 Pass 3= 3 Pass 17 Evaporator Inlet Nozzle Connection Type V= Groove F= Flanged 18 Evaporator Inlet Nozzle Configuration A= Dish, End (Non-Directional Flow) C= Dish, End (Over/Under Flow) D= Water Box, Top (Non-Directional Flow) E= Water Box, Rear (Non-Directional Flow) F= Water Box, Front (Non-Directional Flow) H= Water Box, Rear (Over/Under Flow) J= Water Box, Front (Over/Under Flow) L= Water Box, Rear/Top (Over/Under Flow) M= Water Box, Front/Top (Over/Under Flow) 19 Evaporator Hinged Type N= None H= Standard Hinged on Both Ends 20 Evaporator Refrigerant Design Pressure C= 200 PSIG 21 Evaporator Water Side Design Pressure 4= 150 PSIG - Non-ASME Code 22 Evaporator Leaving Water Temperature Example: 440F = 44.0 degrees F 23 Evaporator GPM Example: = 580 GPM 24 Evaporator Tube Sheet Coating/Material C= Carbon Steel E= Enecon Coating - Outside of Tube Sheet 25 Evaporator Head/Water Box Coating/Material C= Carbon Steel E= Enecon Coating - Inside of Head D= Devcon Coating - Inside of Head Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 4

5 Complete Model Nomenclature 26 Always N 27 Evaporator Model Revision 28 Condenser Shell Diameter & Length C2009= 20" Diameter, 9' Length C2012= 20" Diameter, 12' Length C2209= 22" Diameter, 9' Length C2212= 22" Diameter, 12' Length 29 Condenser Tube Configuration & Count 20" Cond Diameter GB=248 (3/4" all) HB=214 (3/4" all) JB=150 (3/4" all) 22" Cond Diameter GB=300 (3/4" all) HB=263 (3/4" all) 26" Cond Diameter GB=426 (3/4" all) HB=381 (3/4" all) 30 Condenser Tube Thickness 2= = = Condenser Tube Type C= Copper N= CuproNickel 90/10 S= Stainless Steel T= Titanium 32 Condenser Tube Model Always N 36 Always NN 37 Condenser Inlet Nozzle Location L= Left R= Right 38 Condenser Water Passes 1= 1 Pass 2= 2 Pass 3= 3 Pass 39 Condenser Inlet Nozzle Connection Type V= Groove F= Flanged 40 Condenser Inlet Nozzle Configuration A= Dish, End (Non-Directional Flow) C= Dish, End (Over/Under Flow) E= Water Box, Rear (Non-Directional Flow) F= Water Box, Front (Non-Directional Flow) H= Water Box, Rear (Over/Under Flow) J= Water Box, Front (Over/Under Flow) 41 Condenser Hinged Type N= None H= Standard Hinged on Both Ends 42 Condenser Refrigerant Design Pressure C= 200 PSIG 43 Condenser Water Side Design Pressure 4= 150 PSIG - Non-ASME Code 44 Condenser Leaving Water Temperature Example: 1050F = degrees F 45 Condenser GPM Example: = 725 GPM 46 Condenser Tube Sheet Coating/Material C= Carbon Steel E= Enecon Coating - Outside of Tube Sheet M= Monel Clad S= Stainless Steel Clad T= Titanium Clad Steel 47 Condenser Head/Water Box Coating/Material C= Carbon Steel E= Enecon Coating - Inside of Head D= Devcon Coating - Inside of Head Always N 50 Always NN 51 Condenser Model Revision 52 Pressure Vessel Code A= ASME 53 Unit Tons Example: 0150= 150 Tons 54 Refrigerant A= Refrigerant 134a 55 Refrigerant Weight example: 0700= 700 Pounds 56 Expansion Valve S1= Electronic Expansion Valve, single actuator, 150T S3= Electronic Expansion Valve, single actuator, 300T 57 Controller Type 3L= Microtech II, pco3 (Large) 58 Controller Language E= English 59 Controller Rapid Restore N= None R= Rapid Restore 60 Controller Communications N= None B= BACnet MS/TP E= BACnet IP L= LonMark M= ModBus Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 5

6 Complete Model Nomenclature 61 Power Box & Unit Controller Box Type A= NEMA 1 62 Rated Load Amps (RLA) - Compressor Example: 01020= Amps 63 Power Box - Box Type S= Single Point, Single Box w/metal Compressor Conduits M= Multi Point, Single Box w/metal Compressor Conduits T= Single Point, Single Box w/non-metal Compr. Conduits V= Multi Point, Single Box w/non-metal Compr. Conduits 64 Power Connection Type D= Disconnect Switch P= Power Block 65 EMI Filter N= None P= EMI Filter 66 Always N 67 Short Circuit Ratings S= Standard Short Circuit Current Rating, 35KA H= High Short Circuit Current Rating, 65KA 78 Special N= None X= Special Miscellaneous Warranty Miscellaneous 99 Unit Model Revision B= Revision Level B 100 Unit kw Example: 02487= kw 101 Miscellaneous 102 Isolation Valves WV= With Suction Shut-off Valves and With Discharge Check Valve ND= Without Suction Shut-off Valves and With Discharge Shut-off Valves 68 Ground Fault Protection N= None F= With Ground Fault Protection 69 Harmonic Filter N= None M= Unit Mounted Harmonic Filter 70 Part Load Balancing Valve N= None B= Part Load Balancing Valve 71 Always N 72 Vessel Insulation N= None H= 3/4" insulation on Evap Shell, Suction Piping, Compressor Inlet, Motor Barrel 2= 3/4" insulation on Cond Shell only 3= 1-1/2" insulation on Evap shell, Suction Piping, Compr Inlet, Mtr Barrel 5= H + 2 9= Head Insulation N= None 2= Evaporator Return and Connection Heads insulated 3= 3/4" Cond Return and Connection Heads insulated 4= Factory Water Flow Indication B= Both Evaporator and Condenser Flow Control Miscellaneous Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 6

7 Electrical Legend A... Alarm B... Analog Input Connections CB... Circuit Breaker CF... Condenser Flow Switch CNT... Contactor CP1, 2... Condenser Pump Cycling Relay CPB... Capacitor Bank CT Cooling Tower Relay Stages 1-4 CTB1... Terminal Block CWI... Condenser Water Interlocks DS... Disconnect Switch EFS... Evaporator Flow Switch EMI... Electro-Magnetic Interference Filter EP1, 2... Evap Pump Cycling Relay 1, 2 EWI... Evaporator Water Interlocks EXV... Electronic Expansion Valve EXVB... Electronic Expansion Valve Board F... Fuse FB... Fuse Block GFP... Ground Fault Protector GND... Ground HF... Harmonic Filter ID... Digital Input Connections IR... Isolation Relay I/O CM... Input/Output Compr Module K1T... Time Delay Relay K1V... Surge Relay K1R... Harmonic Filter 1 Relay K2R... Harmonic Filter 2 Relay LBV...Load Balance Valve LR...Line Reactor M1T...High Ambient Fan OILR...Optically Isolated Line Repeater R1V...Surge Absorber S1T...High Ambient Fan Thermostat SPPB...Single Point Power Block SW1...Unit Start/Stop Switch SW2...Compressor Manual Stop Switch SW3...Remote Start/Stop Switch SW4...Mode Switch SW5...Emergency Stop Switch T1...Transformer (120VAC) T2...Transformer (24VAC) T3...Transformer (24VAC) T4...Transformer (24VAC) T5...Transformer (24VAC) / Isolation TB1...Terminal Block TRTS...Trap Reactor Thermal Switch UC...Unit Controller UCM...Unit Communication Module UTB1...Terminal Block Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 7

8 Unit Components 001 F033 H030 H030 Single Circuit WMC145S A020 F021 F034 H020 H021 F F033 A050 H030 H030 Dual Circuit WMC 290D shown A020 F021 F034 H020 H020 H021 H021 Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 8

9 Unit Components 125S 225D 145S 250D Ref. # Description Part Number 200S 145D 150D 275D 290D 001 Compressor See Note A020 Compressor Isolator A050 Butterfly Valve (Code 102= WV) A050 Gasket (Code 102= ND) F021 Shut Off Valve F030 Relief Valve, 200#, Angle F033 Relief Valve, 200# F034 Relief Valve, 200# H020 Flow Sensor H020 Adapter, Flow Sensor H021 Cable, Flow Sensor, 5M H021 Cable, Flow Sensor, 10M H030 Sensor Well Note: Contact Daikin Applied with the compressor model, compressor part number, compressor serial number, BMCC revision #, and CC revision #. On dual compressor units, provide same information on other compressor to ensure BMCC compatibility. Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 9

10 Magnetic Bearing Compressor Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 10

11 Magnetic Bearing Compressor Quantity per Ref # Description Part Number compressor 145D 125S 145S 150D 200S 225D 250D 275D 290D 002 Kit, Module, Bearing PWM Kit, DC/DC Converter Assy, 380V Kit, DC/DC Converter Assy, V Kit, DC/DC Converter Assy, 575V Kit, Module, Backplane Assy Kit, End Cap Assy Kit, Insulation Cover, End Bell Kit, Cover, Top Assy Kit, Cover, Service Side Assy Kit, Cover, Mains Input Assy Kit, Cover, Capacitor Assy Kit, Module Serial Driver Kit, Module, Softstart, 380V Kit, Module, Softstart, 400V Kit, Module, Softstart, 460V Kit, Module Softstart, 575V Kit, Bearing Motor Compressor Control (BMCC) See Note 016 Kit, Input Mains Buss Bars Kit, IGBT Manifold Cooling, w/o DC/DC Converter Kit, IGBT Manifold Cooling, w/o DC/DC Converter Kit, IGBT Manifold Clg, w/dc/dc Converter, 460V NS Kit, Soft Start Cooling Fan Assembly NS Kit, PCB Assy, Compressor Interface Connector NS Kit, Terminal Power Block Assy NS Kit, Terminal Power Block Assy NS Kit, Cover Plate Assy NS Kit, Sensor Assy, Temperature, Motor Rotor NS Kit, Sensor Assy, Temperature, Motor Rotor NS Kit, Tube, Connection to IGBT NS Kit, Capacitor, IGBT Snubber NS Kit, Sensor, Pressure Temp Suction (blue dot) NS Kit, Sensor, Pressure Temp Discharge (red dot) Note: Contact Daikin Applied with the compressor model, compressor part number, compressor serial number, BMCC revision #, and CC revision #. On dual compressor units, provide same information on other compressor to ensure BMCC compatibility. NS = Not Shown Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 11

12 Magnetic Bearing Compressor Ref # Description Part Number Quantity per compressor 145D 125S 145S 150D 200S 225D 250D 275D 290D NS Kit, Diode Rectifiers (SCR) NS Kit, Diode Rectifiers (SCR) NS Kit, Sensor Heatsink Diode Rectifiers Dual Cool NS Kit, Flange, Economizer NS Kit, Flange, Economizer NS Kit, Flange, Suction, Brass NS Kit, Flange, Suction, Steel NS Kit, Flange, Suction, Brass NS Kit, Flange, Discharge, Brass NS Kit, Flange, Discharge, Brass NS Kit, Flange, Discharge, Steel NS Kit, O-Ring, IGBT Assy NS Kit, O-Ring, Ports Connection NS Kit, O-Ring, IGV Assy NS Kit, O-Ring, End Cap Assy NS Kit, O-Ring, Service Side Small O-Rings NS Kit, O-Ring, Cover Plate Assy NS Kit, O-Ring, Suction Port Only NS Kit, Cable Harness, Compressor DC Bus NS Kit, Cable Harness Assy, Compressor Interface NS Kit, Cable Harness, Softstart SCR Gate NS Kit, Cable Harness, Mtr Cooling & Coil Assy NS Kit, Cable Harness, Mtr Cooling & Coil Assy NS Kit, Cable Harness, Compressor Controller NS Kit, Cable Harness, Front Bearing Sensor NS Kit, Cable Harness, Rear Bearing Sensor NS Kit, Cable Harness, Mtr Driver (IGBT to Backplane) NS Kit, Cable Harness, Softstart AC/DC, Fused NS Kit, Cable Harness, Softstart AC/DC NS Cable Harness, DC/DC to Backplane NS Line Reactor, 140A, 5% NS Line Reactor, 180A, 5% NS Line Reactor, 240A, 5% NS Line Reactor, 140A, 10% NS = Not Shown Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 12

13 Magnetic Bearing Compressor Ref # Description Part Number 145D 125S 145S 150D 200S 225D 250D 275D 290D NS EMI/EMC Filter, CE, 185A NS EMI/EMC Filter, CE, 322A NS Kit, Fuse, Class T, Fast Acting NS Fuse, Slo Nano SMF 0.25A, 125V NS Fuse, Slo Nano SMF 0.2A, 600V, Midget,Time Delay NS Kit, Fuse 2A, 1000V, HVA, NS Kit, Fuses, Softstart NS Kit, Fuse Nano SMF 1.0A, 125V NS Kit, IGV Motor Service NS Kit, Buss Bar Assy and Capacitors, 400V NS Kit, Buss Bar Assy and Capacitors, 460V NS Kit, Buss Bar Assy and Capacitors, 380V/400V NS Kit, Buss Bar Assy and Capacitors, 460V NS Kit, Buss Bar Assembly and Capacitors, 575V NS Kit, Buss Bar Assembly and Capacitors, 575V NS Kit, Buss Bar Diode NS Kit, Buss Assy Conn Motor IGBT NS Kit, Buss Assy Conn Motor IGBT NS Kit, Suction Strainer NS Kit, Compressor Cooling Adaptor w/strainer NS Kit, Strainer for Cooling Adapter NS Kit, Compressor Mounting NS Kit, Screws for Covers, M5, Stainless Steel NS Dielectric Grease NS Kit, Cooling Valves Assy NS Kit, Cooling Valves Assy (380V, 400V, 460V) NS Kit, Cooling Valves Assy (575V) NS Kit, Cooling Valves Assy (380V) NS Kit, Cooling Valves Assy (400V, 460V) NS Kit, Cooling Valves Assy NS = Not Shown Quantity per compressor Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 13

14 Magnetic Bearing Compressor Ref # Description Part Number 145D 125S 145S 150D 200S 225D 250D 275D 290D NS Kit, IGV Housing Assembly and O-Rings NS Kit, IGV Housing Assembly and O-Rings NS Kit, IGV Housing Assembly and O-Rings NS Kit, IGV Housing Assembly and O-Rings NS Kit, Bracket Mains Input Plate, 2.0" Diameter NS Kit, Bracket Mains Input Plate, 2.5 Diameter NS Kit, Bracket Mains Input Plate, 3.0 Diameter NS Kit, Bracket Mains Input Plate, 3.5 Diameter NS Kit, Heatsink Cooling Manifold SCR Assy NS Kit, Heatsink Cooling Manifold SCR Assy NS Kit, Hermetic Feedthrough IGV - 4 Pin NS Kit, Hermetic Feedthru, Rear Bearing, 6-Pin NS Kit, Hermetic Feedthru, Front Bearing, 4-Pin NS Kit, Hermetic Feedthru, Bearing Sensor, 9-Pin NS Kit, Hermetic Feedthru High Power NS = Not Shown Quantity per compressor Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 14

15 Piping - Discharge C031 C044 C031 WMC290D shown 125S 225D Ref. # Description Part Number 145S 145D 150D 250D 290D 200S 275D C031 Gasket, 6.88 OD C044 Check Valve Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 15

16 Piping - Liquid Line and Motor Cooling E022 B012 B030 B017 E040 B030 B041 Motor Cooling Line 290D shown B012 B041 E022 Liquid Line 145D shown B012 Liquid Line 250D shown 125S 225D Ref. # Description Part Number 145S 145D 150D 200S 250D 290D 275D B012 Gasket, 2.84 OD B017 Gasket, 4.15 OD B030 Electronic Expansion Valve, 126 Ton B030 Electronic Expansion Valve, 250 Ton B041 Ball Valve, B041 Ball Valve, E022 Ball Valve, E040 Filter Drier, Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 16

17 Piping - Part Load Balancing Valve Size 125S, 145S, 200S K006 K006 K006 Sizes 145D, 150D, 225D, 250D, 275D, 290D 125S 225D Ref. # Description Part Number 145S 145D 150D 250D 290D 200S 275D K006 Electronic Expansion Valve Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 17

18 Condenser Dish Heads and Head Gaskets Connection End Return End 355 Gasket Gasket 352 Shown: 2-Pass, Grooved Connection, Dish Heads Ref. # Description Part Number Qty. 110 Sight Glass Clear w/ball Shut-Off Valve Cap, Flare Code 38 Code 39 Code 40 # Passes Connection Type Nozzle Configuration 1=1 Pass V = Grooved A = Dish, End (Non-directional Flow) 2=2 Pass F = Flanged C = Dish, End (Over/Under Flow) 3=3 Pass 1- Pass Head Types Dish Grooved Dish Flanged Connection Return Connection Return 2- Pass 3- Pass Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 18

19 Condenser Dish Heads and Head Gaskets Heads To properly identify Condenser Heads, please contact Daikin Applied with the Unit SO and/or GO Number; and the Unit Serial Number. If available, also include the Condenser Style Number and Serial Number. Head Gaskets 20 Inch Condenser with Dish Heads Ref. # Description Part Number Qty. 1 Pass, 150 PSI, Dish Heads, non-asme 352/355 Gasket, Head per head 2 Pass, 150 PSI, Dish Heads, non-asme 352 Gasket Kit, Connection Head Gasket, Return Head Pass, 150 PSI, Dish Heads, non-asme 352/355 Gasket Kit, Head per head 22 Inch Condenser with Dish Heads Ref. # Description Part Number Qty. 1 Pass, 150 PSI, Dish Heads, non-asme 352/355 Gasket, Head per head 2 Pass, 150 PSI, Dish Heads, non-asme 352 Gasket Kit, Connection Head Gasket, Return Head Pass, 150 PSI, Dish Heads, non-asme 352/355 Gasket Kit, Head per head Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 19

20 Condenser Water Box Heads and Head Gaskets Connection End Return End 355 Gasket 366 Water Box Cover Gasket Water Box to Shell Gasket 352 Shown: 2-Pass, Grooved Connection, Water Box Head Ref. # Description Part Number Qty. 110 Sight Glass Clear w/ball Shut-Off Valve Cap, Flare Code 38 Code 39 Code 40 # Passes Connection Type Nozzle Configuration 1=1 Pass V = Grooved E = Water Box, Rear (Non-directional Flow) 2=2 Pass F = Flanged F = Water Box, Front (Non-directional Flow) 3=3 Pass H = Water Box, Rear (Over/Under Flow) J = Water Box, Front (Over/Under Flow) Head Types Water Box Grooved Water Box Flanged Connection Return Connection Return 1- Pass 2- Pass 3- Pass Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 20

21 Condenser Water Box Heads and Head Gaskets Heads To properly identify Condenser Heads, please contact Daikin Applied with the Unit SO and/or GO Number; and the Unit Serial Number. If available, also include the Condenser Style Number and Serial Number. 20 Inch Condenser Head Gaskets Ref. # Description Part Number Qty. 1 Pass, 150 PSI, Water Box Heads, non-asme 352/366 Gasket, Head per end 2 Pass, 150 PSI, Water Box Heads, non-asme 352 Gasket Kit, Water Box to Shell Gasket, Return Head Gasket Kit, Water Box Cover Pass, 150 PSI, Water Box Heads, non-asme 352 Gasket Kit, Water Box to Shell Gasket Kit, Water Box Cover Inch Condenser with Water Box Heads Ref. # Description Part Number Qty. 1 Pass, 150 PSI, Water Box Heads, non-asme 352/366 Gasket, Head per end 2 Pass, 150 PSI, Water Box Heads, non-asme 352 Gasket Kit, Water Box to Shell Gasket, Return Head Gasket Kit, Water Box Cover Pass, 150 PSI, Water Box Heads, non-asme 352 Gasket Kit, Water Box to Shell Gasket Kit, Water Box Cover Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 21

22 Condenser Insulation Description Part Number Quantity 20 inch, 9 ft. Condenser: (125S, 145S, 145D) Insulation, 3/4", Condenser Shell square ft Insulation, 3/4", Condenser Head square ft per head 20 inch, 12 ft. Condenser: (150D) Insulation, 3/4", Condenser Shell square ft Insulation, 3/4", Condenser Head square ft per head 22 inch, 9 ft. Condenser: (200S, 225D, 250D) Insulation, 3/4", Condenser Shell square ft Insulation, 3/4", Condenser Head square ft per head 22 inch, 12 ft. Condenser: (275D, 290D) Insulation, 3/4", Condenser Shell square ft Insulation, 3/4", Condenser Head square ft per head Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 22

23 Evaporator Dish Heads and Head Gaskets Connection End Return End 355 Gasket Gasket 352 Shown: 2-Pass, Grooved Connections, Dish Heads Ref. # Description Part Number Qty. 330 Shut-Off Valve Cap, Flare Code 16 Code 17 Code 18 # Passes Connection Type Nozzle Configuration 1=1 Pass V = Grooved A = Dish, End (Non-directional Flow) 2=2 Pass F = Flanged C = Dish, End (Over/Under Flow) 3=3 Pass 1- Pass Head Types Dish Grooved Dish Flanged Connection Return Connection Return 2- Pass 3- Pass Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 23

24 Evaporator Dish Heads and Head Gaskets Heads To properly identify Evaporator Heads, please contact Daikin Applied with the Unit SO and/or GO Number; and the Unit Serial Number. If available, also include the Evaporator Style Number and Serial Number. Head Gaskets 22 Inch Evaporator with Dish Heads Ref. # Description Part Number Qty. 1 Pass, 150 PSI, Dish Heads, non-asme 352/355 Gasket, Head per head 2 Pass, 150 PSI, Dish Heads, non-asme 352 Gasket Kit, Connection Head Gasket, Return Head Pass, 150 PSI, Dish Heads, non-asme 352/355 Gasket Kit, Head per head 26 Inch Evaporator with Dish Heads Ref. # Description Part Number Qty. 1 Pass, 150 PSI, Dish Heads, non-asme 352/355 Gasket, Head per head 2 Pass, 150 PSI, Dish Heads, non-asme 352 Gasket Kit, Connection Head Gasket, Return Head Pass, 150 PSI, Dish Heads, non-asme 352/355 Gasket Kit, Head per head Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 24

25 Evaporator Water Box Heads and Head Gaskets Water Box Cover Gasket 366 Connection End Return End 355 Gasket Water Box to Shell Gasket 352 Shown: 2-Pass, Grooved Connections, Water Box Head Ref. # Description Part Number Qty. 330 Shut-Off Valve Cap, Flare Code 16 Code 17 Code 18 # Passes Connection Type Nozzle Configuration 1=1 Pass V = Grooved D = Water Box, Top (Non-directional Flow) 2=2 Pass F = Flanged E = Water Box, Rear (Non-directional Flow) 3=3 Pass F = Water Box, Front (Non-directional Flow) H = Water Box, Rear (Over/Under Flow) J = Water Box, Front (Over/Under Flow) 1- Pass (Front Nozzle Shown) Head Types Water Box Grooved Water Box Flanged Connection Return Connection Return 2- Pass 3- Pass Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 25

26 Evaporator Water Box Heads and Head Gaskets Heads To properly identify Evaporator Heads, please contact Daikin Applied with the Unit SO and/or GO Number; and the Unit Serial Number. If available, also include the Evaporator Style Number and Serial Number. 22 Inch Evaporator with Water Box Heads Head Gaskets Ref. # Description Part Number Qty. 1 Pass, 150 PSI, Water Box Heads, non-asme 352/366 Gasket, Head per end 2 Pass, 150 PSI, Water Box Heads, non-asme 352 Gasket Kit, Water Box to Shell Gasket, Return Head Gasket Kit, Water Box Cover Pass, 150 PSI, Water Box Heads, non-asme 352 Gasket Kit, Water Box to Shell per end 366 Gasket Kit, Water Box Cover per end 26 Inch Evaporator with Water Box Heads Ref. # Description Part Number Qty. 1 Pass, 150 PSI, Water Box Heads, non-asme 352/366 Gasket, Head per end 2 Pass, 150 PSI, Water Box Heads, non-asme 352 Gasket Kit, Water Box to Shell Gasket, Return Head Gasket Kit, Water Box Cover Pass, 150 PSI, Water Box Heads, non-asme 352 Gasket Kit, Water Box to Shell per end 366 Gasket Kit, Water Box Cover per end Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 26

27 Evaporator Insulation Single Insulation Description Part Number Quantity 22 inch, 9 ft. Evaporator: (125S, 145S, 145D) Insulation, 3/4", Evaporator Shell square ft Insulation, 3/4", Evaporator Head square ft per head 22 inch, 12 ft. Evaporator: (150D) Insulation, 3/4", Evaporator Shell square ft Insulation, 3/4", Evaporator Head square ft per head 26 inch, 9 ft. Evaporator: (200S, 225D, 250D) Insulation, 3/4", Evaporator Shell square ft Insulation, 3/4", Evaporator Head square ft per head 26 inch, 12 ft. Evaporator: (275D, 290D) Insulation, 3/4", Evaporator Shell square ft Insulation, 3/4", Evaporator Head square ft per head Suction Insulation, 3/4", (Code 102= ND) square ft per suction line Suction Insulation, 3/4", (Code 102= WV) square ft per suction line Double Insulation Description Part Number Quantity 22 inch, 9 ft. Evaporator: (125S, 145S, 145D) Insulation, 3/4", Evaporator Shell square ft Insulation, 3/4", Evaporator Head square ft per head 22 inch, 12 ft. Evaporator: (150D) Insulation, 3/4", Evaporator Shell square ft Insulation, 3/4", Evaporator Head square ft per head 26 inch, 9 ft. Evaporator: (200S, 225D, 250D) Insulation, 3/4", Evaporator Shell square ft Insulation, 3/4", Evaporator Head square ft per head 26 inch, 12 ft. Evaporator: (275D, 290D) Insulation, 3/4", Evaporator Shell square ft Insulation, 3/4", Evaporator Head square ft per head Suction Insulation, 3/4", (Code 102= ND) square ft per suction line Suction Insulation, 3/4",(Code 102= WV) square ft per suction line Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 27

28 Unit Controls Operator Interface Panel (OITS) WMC 150D shown Power Panel Unit Control Box Ref. Description Part Qty. No. Number 15 Operator Interface Panel (OITS) w/cables, 15 Black Cable, 12V DC Power w/ 4-Pin Molex and 2 Plugs Cable, Serial Cable Kit (includes Serial & VGA cords) Power Cord w/ AC Adapter Support Arm Assy, Black (includes swivel pin, washers, & nut) Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 28

29 Unit Controls Unit Control Box Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 29

30 Unit Controls Unit Control Box Ref. # Schem. Description Part Number Qty. 102 SW1 Rocker Switch, Unit SW6, SW7 Rocker Switch, Compressor SW10 Rocker Switch, Emergency Shut-down CB Circuit Breaker, 10A, 250V EXV EXV Driver Board PC OITS Circuit Board Assy Power Supply for Ckt Brd - OITS Memory Card UCM Comm Module Board MOD1, MOD2 PCB Assy UC Unit Controller, MTII Serial Card for Unit Controller NS US05 Sensor- 30 ft NS US02, US03, US04 Sensor- 30 ft NS US10 Sensor- 30 ft NS = Not Shown 400 Ref. # Description Part Number Qty. 400 LonMark Serial Interface ModBus RS485 Serial Network Board RS232 Serial Gateway / Modem Board BACnet with IP Ethernet NS BACnet with MS/TP NS = Not Shown Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 30

31 Unit Controls Power Box GFS1 T2, T3 GFR1 400 Single Point Configuration (Code 63= S) CB1 CB2 DS1 or PB EMI1 EMI2 T1, F13 LR1 LR2 GFS1 GFS2 GFR1, GFR2 Multiple Point Configuration (Code 63= M) CB1 CB2 T2, T3 EMI1 EMI2 T1, F13 LR1 LR2 Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 31

32 Unit Controls Power Box Schem. Description RLA Range Part Number Quantity (Code 62) GFS1, GFS2 Ground Fault Sensor All GFR1, GFR2 Ground Fault Relay All Standard Short Circuit Current Rating Code 67= S DS1 Main Disconnect Switch w/handle, 150A DS1 Main Disconnect Switch w/handle, 200A DS1 Main Disconnect Switch w/handle, 225A DS1 Main Disconnect Switch w/handle, 250A DS1 Main Disconnect Switch w/handle, 400A DS1 Main Disconnect Switch w/handle, 600A DS1 Main Disconnect Switch w/handle, 800A High Short Circuit Current Rating Code 67= H DS1 Main Disconnect Switch w/handle, 150A DS1 Main Disconnect Switch w/handle, 200A DS1 Main Disconnect Switch w/handle, 225A DS1 Main Disconnect Switch w/handle, 250A DS1 Main Disconnect Switch w/handle, 400A DS1 Main Disconnect Switch w/handle, 600A DS1 Main Disconnect Switch w/handle, 800A PB Main Power Block, 175A PB Main Power Block, 380A PB Main Power Block, 760A CB1, CB2 Branch Disconnect Switch, 70A CB1, CB2 Branch Disconnect Switch, 80A CB1, CB2 Branch Disconnect Switch, 90A CB1, CB2 Branch Disconnect Switch, 100A CB1, CB2 Branch Disconnect Switch, 125A CB1, CB2 Branch Disconnect Switch, 150A CB1, CB2 Branch Disconnect Switch, 175A CB1, CB2 Branch Disconnect Switch, 200A CB1, CB2 Branch Disconnect Switch, 225A CB1, CB2 Branch Disconnect Switch, 250A CB1, CB2 Branch Disconnect Switch, 300A CB1, CB2 Branch Disconnect Switch, 400A Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 32

33 Unit Controls Power Box Schem. Description RLA Range Part Number Quantity (Code 62) EMI1, EMI2 EMI Filter, 90A, V EMI1, EMI2 EMI Filter, 120A, V EMI1, EMI2 EMI Filter, 150A, V EMI1, EMI2 EMI Filter, 180A, V EMI1, EMI2 EMI Filter, 250A, V EMI1, EMI2 EMI Filter, 320A, V EMI1, EMI2 EMI Filter, 120A, 575V EMI1, EMI2 EMI Filter, 150A, 575V EMI1, EMI2 EMI Filter, 180A, 575V EMI1, EMI2 EMI Filter, 250A, 575V LR1, LR2 Line Reactor, V LR1, LR2 Line Reactor, V LR1, LR2 Line Reactor, V LR1, LR2 Line Reactor, V LR1, LR2 Line Reactor, V LR1, LR2 Line Reactor, 575V LR1, LR2 Line Reactor, 575V LR1, LR2 Line Reactor, 575V LR1, LR2 Line Reactor, 575V F14-16, * Main Power Fuse (not used on 145D, 150D) F14-16, * Main Power Fuse (not used on 145D, 150D) F11-12, * Control Power Fuse All IR * Interlock Relay, 380V All IR * Interlock Relay, 400V All IR * Interlock Relay, 460V All IR * Interlock Relay, 575V All T1 Control Transformer All F13 Control Fuse All S1T * Temperature Switch M1F * Fan Motor * Not shown on diagram. Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 33

34 Unit Controls Power Box Schem. Description RLA Range Part Number Quantity (Code 62) K1V * Surge Relay All K1T * Time Delay Relay All T2 Transformer, OITS All T3 Transformer, Chiller Controller All R1V * Surge Absorber All HF1, HF2 Harmonic Filter All ** 2 * Not shown on diagram. ** Contact Daikin Applied with the Power Box Serial No. and Power Box Part No. Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 34

35 Unit Controls Power Box Label For other control components, please contact Daikin Applied with the Power Box Serial Number and Power Box Part Number. These numbers are located on the Power Box rating label (see example below). This label is found on the inside of the panel door. Power Box Serial Number Power Box Part Number Sales Order: Daikin G.O.: Daikin P.O.: Serial: W Daikin Ref. No.: Benshaw Part No.: WMCZCZ154Z154D4606ASDPNSNNNS Daikin Part No.: Daikin Code String: BOX-ELEC,BEN-WMC_400D_C_TT500_01540_TT500_01540_D_00460_H6_A_S_D_P_N_S_N_N_N_S_R0 System HP: N/A System Voltage: 460 Frequency: 60 Phase: 3 Type: 1 SCCR Ka RMS: 35 System RLA: 308 Max RLA: N/A Sytem LRA: 339 Max LRA: N/A Interrupt Rating: 35 Magnetic Bearing Compr. Chiller; WMC 125S-290D, Vint. C Rev. F 10/2017 RPL / Page 35