New Models. Expanded Options. IDEC LUMIFA Family LED Lighting Solutions
|
|
- Christal Montgomery
- 6 years ago
- Views:
Transcription
1 New Models Expanded Options IDE LUMIF Family LED Lighting Solutions
2 LUMIF Lighting your way For over three decades, IDE has produced LEDs for applications requiring indicator lights and signaling towers. That is why it was a natural progression to begin developing lighting products and construct the world s first building illuminated with 1% of our own LED technology. New LUMIF LED lights provide a brighter, longer-lasting, cost-effective and more environmentally-friendly lighting source. Bright: 65.3 lumens/watt (LUMIF series average) Long Lasting: 7% of initial luminance at 5, hrs Efficient: 1/3 the energy of Fluorescent Tubes ompact: Width as narrow as 25mm Rugged: Heavy-duty, durable, water/oil resistant Variety of olors: ool white, warm white, red, yellow, blue, green Greatest Selection: More choices in size, brightness, color, applications and ratings 2
3 Suitable for Harsh Environments With their IP67/IP67f and IP69K ratings, the LF1D and 2D series can be used in wet and harsh environments. Resistant to water, oil and metal shavings, they are perfect for many industrial applications. In addition, the LF1E series can withstand temperatures down to -4º making them ideal for freezers and refrigerated environments. nd, don t forget the EF1 series that has an IP67 rating and can be used in lass 1, Zone 1 and Zone 2 hazardous locations. Fluorescent Tube with Vibration 2, Hrs Xenon 1, Hrs Fluorescent Tube 2, Hrs 25 Times Longer Life 2.5 Times Longer Life IDE LUMIF 5, Hrs Half Life 1, 2, 3, 4, 5, Hours Heat Dissipation Technology In an LED, only 2% of the energy converts into light, while 8% is lost in the form of heat. For that reason, proper heat management is critical. IDE Heat Dissipation Technology (patent pending) uses dissipation pins to transfer heat generated in the LED chip to a heat dissipation plate. This minimizes the buildup of heat in the LED element and results in a longer-lasting LED. Environmentally-friendly LUMIF LEDs are made from non-toxic materials and produce 71% less O 2 emissions compared with a 2W/25W fluorescent tube. LUMIF are also great for green applications such as solar panels, which have a low power requirement and can t supply the energy necessary for fluorescent bulbs. 25kg 2kg 15kg 1kg 5kg kg O kg 25W Fluorescent tube 6.48kg IDE LF1 18.kg 2W Fluorescent tube 5.22kg IDE LF1B
4 LUMIF Selection Guide pplication Examples Illumination olor 1 Reference Illumination 2 Power onsumption Operating Voltage Page Mini LF1D- (IP67f/IP67/IP69K) Machine tools Food processing machines utomatic manufacturing machines Printing machines Production system Test equipment White (5,7K) 18lx 4.6W 24V D LF1D/2D lassic (IP67f/IP67) Slim Wide Machine tools Food processing machines Test equipment White (5,7K) lear Surface: 1,1lx (4,4lx directly below at.5m) Diffused surface: 1,lx (4,lx directly below at.5m) 9W 12.5W 24V D LF1D/2D Slim & Wide 6 LF1D/2D-*H Wide-angle & High Luminance (IP67f/IP67/ IP69K) Slim Machine tools Food processing machines utomatic manufacturing machines Printing machines Production system Test equipment White (5,7K) 1,45lx Wide 1,2lx 12.5W 11W 24V D Long LF1D-H (IP67f/IP67/ IP69K) LF1D-J (IP67f/IP67/ IP69K) Machine tools Food processing machines utomatic manufacturing machines Printing machines Production system Test equipment Neutral White (4,7K) 3 56lx 18.4W 84lx 27.6W 24V D LF2B (IP65) lear over White over Various machines and systems ontrol panel Plant Solar power equipment White (5,5K) LF2B-B: 23lx LF2B-: 425lx LF2B-D: 71lx LF2B-E: 93lx LF2B-F: 1,16lx LF2B-B: 215lx LF2B-: 39lx LF2B-D: 645lx LF2B-E: 835lx LF2B-F: 1,4lx 12/24V D LF2B-B: 2.6W LF2B-: 4.9W LF2B-D: 1.6W 1 to 24V LF2B-B: 3.8W LF2B-: 7.5W LF2B-D: 9.2W LF2B-E: 14.3W LF2B-F: 21.8W 12/24V D 1 to 24V K: olor Temperature (typ.), mm: Dominant Wavelength (typ.). 2. Directly below at unless otherwise noted. 3. To match traditional cool fluorescent lamps. 4
5 pplication Examples Illumination olor 1 Reference Illumination 2 Power onsumption Operating Voltage Page LF1B-N (IP65) lear/ White over Machine tool Plant equipment Test equipment ontrol panel Food processing machines osmetic plant hemical plant Show cases Semiconductor manufacturing equipment I foundry Photosensitive material Semiconductor manufacturing equipment Darkroom experiment dvertising Display Light ornaments ool white (5,5K) Warm white (2,9K) Yellow (59nm) Red (62nm) Blue (455nm) Green (525nm) LF1B-N: 9lx LF1B-NF: 935lx LF1B-N: 6lx LF1B-NF: 62lx LF1B-N: 2lx LF1B-NF: 18lx LF1B-N: 1lx LF1B-NF: 8lx LF1B-N: 3lx LF1B-NF: 3lx ool white/warm white/blue LF1B-N: 1.5W LF1B-NB: 2.9W LF1B-N: 4.4W LF1B-ND: 8.7W LF1B-NE: 13.W LF1B-NF: 17.3W Yellow/Red/Green LF1B-N: 1.W LF1B-NB: 2.W LF1B-N: 2.9W LF1B-ND: 5.8W LF1B-NE: 8.7W LF1B-NF: 11.6W 24V D 15 LF1 (IP4) lear over ontrol Panels Manufacturing Equipment ool white (5,5K) Warm white (2,8K) Yellow (59nm) Red (625nm) LED rray 3x2: 19lx LED rray 6x2: 38lx LED rray 12x2: 76lx LED rray 3x2: 13lx LED rray 6x2: 26lx LED rray 12x2: 52lx LED rray 3x2: 1.8W LED rray 6x2: 3.6W LED rray 12x2: 7.2W LED rray 3x2: 13lx LED rray 6x2: 26lx LED rray 12x2: 52lx LED rray 3x2: 2.2W LED rray 6x2: 4.4W LED rray 3x2: 85lx LED rray 12x2: 8.7W LED rray 6x2: 17lx LED rray 12x2: 34lx 24V D 17 LF1E (IP54) ondensing Lens Freezer and refrigerated display cases ool white (5,K) Warm white (3,K) ool white LF1E-: 1,8lx LF1E-B: 1,95lx LF1E-: 2,lx LF1E-D: 2,lx LF1E-E: 2,lx (directly below at 3cm) LF1E-: 4.2W LF1E-B: 8.4W LF1E-: 12.6W LF1E-D: 16.8W LF1E-E: 22.8W 24V D 19 EF1 (IP67) For Hazardous Locations: Oil, gas & mining industries Printing factory Gas station hemical complex control panel White (5,7K) lear glass surface: 1,1lx (condensing light) 25lx (diffused light) Translucent glass: 45lx (condensing light) 175lx (diffused light) 19W 17W 1 to 24V 24V D 21 LF1F Visual inspection Elevator ceiling 8,5K 5,8lx 11W 21.6 ~ 26.4V D K: olor Temperature (typ.), mm: Dominant Wavelength (typ.). 2. Directly below at.5m unless otherwise noted. 5
6 LUMIF LF1D & LF2D Machine Tools Food & Beverage Processing Equipment Vision Systems LF1D (IP69K) and LF2D (IP67, IP67f) Series With their rugged construction, the LF1D/2D series of light units are ideal for machine tools, automated label and package inspection equipment, and food and beverage processing equipment. Their design provides equally brilliant light at the center or edges of the units. Plus with their ratings, the LF1D (IP67, IP67f, IP69K) and LF2D (IP67, IP67f) can be used where high-pressure and high-temperature washdowns are used. Mini (LF1D-) ompact unit only 1 x 5 x 25mm Single LED module design eliminates multiple shadows while distributing light over a wide area (12º) Slim & Wide (LF1D/2D-E, EH, F, FH) Brightness: Standard Models: up to 1,1lx at High-Luminance Models: up to 1,45lx at vailable with terminal block or spring clamp connections for easy installation ngle adjustable mounting brackets provide installation flexibility Long (LF1D-H/J) Two lengths available: 365mm and 5m The flat light design reduces glare and multiple shadows, improving visibility from a distance R US LED Optical Specifications Model Mini Standard High-Luminance Long LF1D- Slim (LF1D/2D-E) Wide (LF1D/2D-F) Slim (LF1D/2D-EH Wide (LF12D-FH) LF1D-H LF1D-J Illumination Surface lear lear Diffused lear Diffused lear Diffused lear Diffused lear Illumination olor ool White Neutral White Total Luminous Flux 56lm 6lm 84lm 1,lm 1,26lm 2,lm 3,lm olor Temperature 57K 47K Reference Illuminance at 1.m 18lx 1,1lx 1,lx 1,1lx 1,lx 1,45lx 1,2lx 1,45lx 1,2lx 56lx 84lx LED modules and illumination units may vary in color and brilliance. Luminous flux, color temperature, and illuminance values shown above are typical. 6 General Specifications Model Mini Standard High-Luminance Long LF1D- Slim (LF1D/2D-E) Wide (LF1D/2D-F) Slim (LF1D/2D-EH Wide (LF1D/2D-FH) LF1D-H LF1D-J Rated Voltage 24V D Voltage Range 21.6 to 26.4V D Rated Power (typ.) 4.6W 9W 12.5W 11W 12.5W 18.4W 27.6W Insulation Resistance 1MΩ minimum (5V D megger) Dielectric Strength 1,V, 5/6Hz, 1 minute Vibration Resistance (damage limits) Frequency 5 to 55Hz, amplitude.5mm Shock Resistance (damage limits) /s 2 Operating Temperature 3 to +55 (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature 35 to +7 (no freezing) Operating Environment No corrosive gases Life 1 5, hours (The illumination duration in which the illuminance maintains a minimum of 7% of the initial value at 25º.) Degree of Protection 2 IP67f (LF2D: reinforced glass), IP67 (LF2D: polycarbonate), IP69K (LF1D) Material 3 Housing: Diecast aluminum (LF1D/LF2D), Lens: Reinforced glass or polycarbonate (LF1D/LF2D) over: Stainless steel (LF1D), Flange cover: Diecast aluminum (LF2D) Weight (approx.) 42g LF1D-E*-2W*: 75g LF1D-E*-2W-*: 95g LF2D-E*-2W*: 85g LF2D-E*-2W-*: 1,g LF1D-F*-2W*: 8g LF1D-F*-2W-*: 1,g LF2D-F*-2W*: 9g LF2D-F*-2W-*: 1,5g LF1D-E*-2W*: 75g LF1D-E*-2W-*: 95g LF2D-E*-2W*: 85g LF2D-E*-2W-*: 1,g LF1D-F*-2W*: 8g LF1D-F*-2W-*: 1,g LF2D-F*-2W*: 9g LF2D-F*-2W-*: 1,5g 1. LED life depends on the operating environment. 2. Waterproof or oil-proof characteristics specified by IE 6529 and JEM13. For illumination units without accessories, use a cable gland and cables that satisfy IP67f or IP67 degree of protection. 3. The reinforced glass and polycarbonate illumination surfaces have the same appearance, but have different degrees of protection (IP67f or IP67). 12g 16g
7 Part Numbers Mini (LF1D-) Long (LF1D-H 365mm) Long (LF1D-J 5m) able Location Length Part Number able able Part Number Location Length Location Length Part Number Side Back 5m 5m LF1D-2F-2W-33 LF1D-2F-2W-35 LF1D-2F-2W-43 LF1D-2F-2W-45 Side Back 5m LF1D-H2F-2N-35 5m LF1D-J2F-2N-35 Side 1.5m + M12 connector LF1D-H2F-2N-3B 1.5m + M12 connector LF1D-J2F-2N-3B 5m LF1D-H2F-2N-45 5m LF1D-J2F-2N-45 Back 1.5m + M12 connector LF1D-H2F-2N-4B 1.5m + M12 connector LF1D-J2F-2N-4B Slim and Wide Surface Mounting (LF1D/-E, EH, F, FH) able Gland LF9Z-11 Model Slim Model (1 LEDs 1 row) Wide Model (7 LEDs 2 rows) able LF9Z-5 Mounting Bracket LF9Z-B11,B12 lear Reinforced Glass lear Polycarbonate lear Reinforced Glass lear Polycarbonate (hole on the side) LF1D-Ej2F-2W LF1D-Ej2F-2W-11 LF1D-Ej3G-2W LF1D-Ej3G-2W-11 LF1D-Fj2F-2W LF1D-Fj2F-2W-11 LF1D-Fj3G-2W LF1D-Fj3G-2W-11 (hole on the back) LF1D-Ej2F-2W-2 LF1D-Ej2F-2W-21 LF1D-Ej3G-2W-2 LF1D-Ej3G-2W-21 LF1D-Fj2F-2W-2 LF1D-Fj2F-2W-21 LF1D-Fj3G-2W-2 LF1D-Fj3G-2W-21 (Side) (Back) LF1D-Ej2F-2W-3 LF1D-Ej2F-2W-31 LF1D-Ej2F-2W-35 LF1D-Ej2F-2W- LF1D-Ej2F-2W-4 LF1D-Ej2F-2W-41 LF1D-Ej2F-2W-45 LF1D-Ej2F-2W-451 LF1D-Ej3G-2W-3 LF1D-Ej3G-2W-31 LF1D-Ej3G-2W-35 LF1D-Ej3G-2W- LF1D-Ej3G-2W-4 LF1D-Ej3G-2W-41 LF1D-Ej3G-2W-45 LF1D-Ej3G-2W-451 LF1D-Fj2F-2W-3 LF1D-Fj2F-2W-31 LF1D-Fj2F-2W-35 LF1D-Fj2F-2W- LF1D-Fj2F-2W-4 LF1D-Fj2F-2W-41 LF1D-Fj2F-2W-45 LF1D-Fj2F-2W-451 LF1D-Fj3G-2W-3 LF1D-Fj3G-2W-31 LF1D-Fj3G-2W-35 LF1D-Fj3G-2W- LF1D-Fj3G-2W-4 LF1D-Fj3G-2W-41 LF1D-Fj3G-2W-45 LF1D-Fj3G-2W-451 *In place of j insert H for High-Lluminance or leave blank for Standard models. Slim and Wide Recessed Mounting (LF2D/-E, EH, F, FH) Model Slim Model (1 LEDs 1 row) Wide Model (7 LEDs 2 rows) able Gland LF9Z-11 able LF9Z-5 lear Reinforced Glass lear Polycarbonate lear Reinforced Glass lear Polycarbonate LF2D-Ej2F-2W LF2D-Ej3G-2W LF2D-Fj2F-2W LF2D-Fj3G-2W LF2D-Ej2F-2W-2 LF2D-Ej3G-2W-2 LF2D-Fj2F-2W-2 LF2D-Fj3G-2W-2 LF2D-Ej2F-2W-3 LF2D-Ej3G-2W-3 LF2D-Fj2F-2W-3 LF2D-Fj3G-2W-3 (Side) LF2D-Ej2F-2W- LF2D-Ej3G-2W- LF2D-Fj2F-2W- LF2D-Fj3G-2W- LF2D-Ej2F-2W-4 LF2D-Ej3G-2W-4 LF2D-Fj2F-2W-4 LF2D-Fj3G-2W-4 (Back) LF2D-Ej2F-2W-45 LF2D-Ej3G-2W-45 LF2D-Fj2F-2W-45 LF2D-Fj3G-2W-45 *In place of j insert H for High-Lluminance or leave blank for Standard models
8 LF1D & LF2D ccessories Mounting Bracket Item Fixed djustable ngle able Gland able Part Number LF9Z-B11 LF9Z-B12 LF9Z-1MDE1 LF9Z-1MDF1 LF9Z-11 LF9Z-5 pplicable Unit LF1D (Slim) LF1D (Wide) LF1D (Slim) LF1D (Wide) LF1D/2D (Slim & Wide) Material Stainless Steel Brass PV Notes 1 pair, Left and Right M8* Length: 5m *pplicable wire size (1-12 WG) Part Number Structure (use for interpreting part numbers only) L F 2 D E H 2 F 2 W 3 Shape 1: Surface mount 2: Recessed mount Size (LED arrangement) : Mini m (3.94 ) E: Slim Model (1 LEDs 1 row) F: Wide Model (7 LEDs 2 rows) H: Long 365mm (14.37 ) J: Long 5m (2.8 ) Illumination Models (Wide & Slim only) blank: Standard H: large area, High Luminance Terminal Block Wiring Slim Type Wide Type Degree of Protection F: lear reinforced glass IP67f (LF2D), IP67f/IP69K (LF1D) G: lear polycarbonate IP67 (LF2D), IP67/IP69K (LF1D) Illumination olor W: white N: neutral Illumination Surface 2: lear, Reinforced glass 3: lear, Polycarbonate 5: Diffused, Polycarbonate (standard wide & slim) 9: Diffused, Reinforced glass (standard wide & slim) able Gland able ode Gland Blank B B able Gland Hole Location side side side back back side side side side side back back back back back back able 5m 1.5m 3 5m 5m 5m 1.5m 3 Mounting Bracket Mounting bracket available for LF1D (wide and slim) only. 2. Only available for LF1D (wide and slim) models m cable with M12 connector for Long only (LF1D-H, J). pplicable ferrules:.25 to.75 mm 2 Recommended source - Phoenix ontact: I,25-12 BU, I,34-12 TQ, I,5-12 WH, I,75-12 GY Illuminance harts LF1D- LF1D/2D-EH LF1D/2D-FH LF1D-H LF1D-J 3 1,2 1, , B B
9 Distribution haracteristics LF1D- LF1D- LF1D/2D-EH LF1D/2D-FH lx lx lx 45 1,2 1, mm LF1D-H lx LF1D-H mm LF1D-J LF1D-J lx mm mm mm Internal ircuit LF1D- Housing LF1D/2D-E, EH, F, FH Housing LF1D-H/J Housing (+) () onstant urrent ircuit + LED (+) () onstant urrent ircuit + LED (+) () onstant urrent ircuit + LED Dimensions (mm) LF1D- Mini 2-ø able Illumination Surface 25 Front over able Length Housing Brown: + 24V D Blue: V D Partially-stripped ( 2) 24WG 84.2 (23.9) 18.1 ø8 (Note) Note: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. lso, provide a proper sealing. Recommended M5 screw: Screw head height: 9.5mm max. Screw head diameter: m max. Screw length: 2mm min. Recommended washer diameter: m max. 2-M5 tapped hole or ø5.2 hole
10 LF1D & LF2D LF1D Slim R LF9Z-1MDE1 (ngle djustable Mounting Bracket) ngle: ± M4 P.7 Effective thread:m Mounting Bracket 4-M5 Screws xis enter Illumination Surface 35 (159) (146) 374 ±2 (Note 2) ±1 Front over Housing able Length: 5m 5 Side over ø (Note 1) Brown: L(+) Blue: N () Pink: ( ) Partially-stripped ( 2) 24WG ngle: R45 Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. Note 2: When using the angle adjustable mounting bracket, the +2. tolerance is when the gasket diameter is larger than ø1 and ø12 or smaller (When using no accessories) ø ±.2 4-M4 P.7 Effective thread m 35 ±.2 M8 P1. Effective thread: 5mm 4 4 ±.2 LF2D Slim R LF9Z-1MDE1 (ngle djustable Mounting Bracket) ngle: Panel thickness: 5 max max. 6 Mounting Bracket xis enter (12) 4-M5 Screws 227 Illumination Surface Front over Housing 6-M5 1 Hexagon Socket + Gasket (17) (supplied with LF2D) able Gland (Note) ø5 ø5 Brown: L(+) Blue: N () Pink: ( ) Partially-stripped ( 2) 24WG Brown: L(+) Blue: N () Pink: ( ) able Length: 5m Note: External diameter of cable gland is ø2mm Terminal Block Wiring ngle: 9 R ± ± ±.2 (Note 2) ±1 Waterproof Gasket (suplied with LF2D) ø15 (Note 1) +.2 Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. Note 2: When using the angle adjustable mounting bracket, the tolerance is 374 when the gasket diameter is larger than ø1 and ø12 or smaller () (+) 8 65 ± ø5.2 (When using no accessories) 6-M5 Screws pplicable ferrules:.25 to.75mm 2 Recommended source: I.25-12BU, I.34-12TQ, I.5-12 WH, I.75-12GY ø ±.2 4-M5 P.8 Effective thread: m ± M8 P1. Effective thread: 5mm 6 6 ±.2
11 (Note 2) (Note 1) Note 2: When using the angle adjustable mounting bracket, the +2. tolerance is when the gasket diameter is larger than ø1 and ø12 or smaller. LF1D Wide R LF9Z-1MDE1 (ngle djustable Mounting Bracket) ngle: M5 P.8 Effective thread:m Mounting Bracket xis 374 enter (12) Illumination Surface (17) Housing Front over able Length: 5m ø5 Side over 15.7 Brown: L(+) Blue: N () Pink: ( ) Partially-stripped ( 2) 24WG ngle: 9 R6 Panel thickness: 5 max max. 6 4 ±.2 xis enter 4-M5 Screws 292 ±2 (Note 2) 6-M5 1 Hexagon Socket + Gasket (supplied with LF2D) able Gland (Note) ±1 ø15 (Note 1) +.2 Waterproof Gasket (suplied with LF2D) ø5 Brown: L(+) Blue: N () Pink: ( ) able Length: 5m Note: External diameter of cable gland is ø2mm Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. Note 2: When using the angle adjustable mounting bracket, the tolerance is 374 when the gasket diameter is larger than ø1 and ø12 or smaller. +2. Terminal Block Wiring ± ±.2 4-M5 P.8 Effective thread: m 4-ø ±.2 (When using no accessories) 227 ±.2 M8 P1. Effective thread: 5mm 6-M5 Screws ø5.2 () (+) pplicable ferrules:.25 to.75mm 2 Recommended source: I.25-12BU, I.34-12TQ, I.5-12 WH, I.75-12GY 6 ±.2 LF2D Wide max. xis enter 6-M5 1 Hexagon Socket + Gasket (supplied with LF2D) Panel thickness: 5 max 24.8 able Gland (Note) ø5 able Length: 5m Brown: L(+) Blue: N () Pink: ( ) Note: External diameter of cable gland is ø2mm Waterproof Gasket (supplied with LF2D) Terminal Block Wiring 293 ± ± M5 Screws () (+) pplicable ferrules:.25 to.75mm 2 Recommended source: I.25-12BU, I.34-12TQ, I.5-12 WH, I.75-12GY 11
12 LF1D & LF2D LF1D-H Long LF1D-J Long Illumination Surface 72 ± Illumination Surface 72 ± Front over Front over Housing 215 Housing 215 ± ± ±.2 M5 P.8 6-ø5.5 able Length 12.5 (35) M5 P.8 6-ø5.5 (25) Partially-stripped ( 2) 24WG Brown: +24V D Blue: Partially-stripped V D ( 2) 24WG (25) ø4.6 Brown: +24V D Blue: V D Side over able Length 12.5 (35) ø4.6 able ø8 (Note 1) able ø8 (Note 1) Side over 12.7 Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting ±.2 plate. ø16 hole is necessary when using the LF1D-*2F-2N-*B* (M12 connector type). Note Note 2: hoose 1: When mounting leading the screws cable in from consideration the cable of gland mounting on the plate back, thickness. provide a hole in the mounting plate. ø16 hole is necessary when using the LF1D-*2F-2N-*B* (M12 connector type). Note 2: hoose mounting screws in consideration of mounting plate thickness. Partially-stripped ( 2) 24WG Brown: +24V D Blue: Partially-stripped V D ( 2) 24WG Brown: +24V D Blue: V Side D over 12.7 LF1D-H2F-2*-*B* (M12 connector) Mounting Panel Plain Mounting Washer Panel Spring Washer ø14.8 LF1D-H2F-2*-*B* (M12 connector) M12 connector: S-4P-MS SO/15/1.5 Pin 147 ssignment 46.8 M12 connector: S-4P-MS SO/15/1.5 N V D +24V D Pin ssignment N N V D Use a connector that satisfies the required degree of +24V protection. D N Recommended connector: S-4P-1.5-PUR/FS Use a connector that SOsatisfies the required degree of protection. Recommended connector: Housing S-4P-1.5-PUR/FS SO 9 to 11 Screw Length (Note 2) M5 Screw Plain Washer Spring - Washer sec. (enlarged view) (When M5 Screw M5 screw is installed) 12.7 ø14.8 Housing 9 to 11 Screw Length (Note 2) - sec. (enlarged view) (When M5 screw is installed) Illumination Surface ± Illumination Surface 72 ± Front over Front over Housing Housing ±.2 12 ±.2 36 ±.2 12 ±.2 23 ±.2 8-ø5.5 ø4.6 ø8 (Note 2) Note 1: When leading the cable from 23 ±.2 the cable gland on the back, provide a hole in the mounting plate. ø16 hole is necessary when using the LF1D-*2F-2N-*B* (M12 connector type). Note Note 2: hoose 1: When mounting leading the screws cable in from consideration the cable of gland mounting on the plate back, thickness. provide a hole in the mounting plate. ø16 hole is necessary when using the LF1D-*2F-2N-*B* (M12 connector type). Note 2: hoose mounting screws in consideration of mounting plate thickness. able Length 12.5 (35) Side over LF1D-J2F-2*-*B* (M12 connector) able Length 12.5 (35) LF1D-J2F-2*-*B* (M12 connector) M5 P.8 M12 connector: S-4P-MS SO/15/1.5 M5 P.8 Pin ssignment M12 Nconnector: S-4P-MS V SO/15/1.5 D able +24V D Pin ssignment N N V D (25) able Use a connector that satisfies the required +24V D N degree of protection. Recommended connector: S-4P-1.5-PUR/FS Use a connector that SOsatisfies the required (25) degree of protection. Recommended connector: S-4P-1.5-PUR/FS SO Housing 8-ø5.5 ø4.6 ø8 (Note 2) Mounting Panel Plain Mounting Washer Panel Spring Washer ø14.8 ø to 11 Screw Length (Note 2) 9 to 11 Screw Length (Note 2) M5 Screw Plain Washer Spring - Washer sec. (enlarged view) (When M5 Screw M5 screw is installed) Housing - sec. (enlarged view) (When M5 screw is installed) 12
13 LUMIF LF2B ontrol Panels Industrial Equipment ommercial Products LF2B Series Wide range of input voltages (1-24V ) for commercial applications, and 12/24V D are available for battery or industrial usage. Slim units can be used in many applications and installations where space is limited. Rated IP65 (protection from water and dust), LF2B is great for environments where there is water spray. Slim units: 4mm wide x 29mm high One-step installation in a narrow space is possible when using mounting brackets Five Lengths (21/33/58/83/1,8mm) are offered to meet space requirements and illumination coverages Bright and clear white LED illuminates the shapes and colors of target objects Two covers: clear or white LED Optical Specifications R US *UL applies for D units only. Model LF2B-B (2m) LF2B- (3m) LF2B-D (58mm) LF2B-E (8m) LF2B-F (1,8mm) Illumination olor White olor Temperature 5,5K Luminous Flux (typ.) 18ln 36ln 72ln 1,8ln 1,44ln over lear White lear White lear White lear White lear White Reference Illuminance (typ.) at.5m directly below 23lx 215lx 425lx 39lx 71lx 645lx 93lx 835lx 1,16lx 1,4lx LED modules and illumination units may vary in illumination colors and illuminance. General Specifications Model Rated Voltage LF2B-B (2m) LF2B- (3m) LF2B-D (58mm) LF2B-E (8m) 1-24V 5/6Hz (Voltage range: 9-264V ) 12V/24V D (Voltage range: 1.8-3V D) LF2B-F (1,8mm) Input urrent (typical) 1~24V 3 67m 96m 149m 226m (at the rated voltage) 1 12V/24V D 215m 49m 88m Rated Power 1~24V 3.8W 7.5W 9.2W 14.3W 21.8W (at the rated voltage) 12V/24V D 2.6W 4.9W 1.6W Insulation Resistance 1MΩ minimum (5V D megger) Dielectric Strength 1~24V 2,V 12V/24V D 1,V Vibration Resistance Frequency 5-55Hz, mplitude.17mm, speed acceleration 2m/s 2, 3 directions, 2 hours each Shock Resistance /s 2, 6 directions, 5 times each Operating Temperature 3 to +55 (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature 35 to +7 (no freezing) Operating tmosphere No corrosive gases Life 2 4, hours (Ta = 25 ) (The total illumination life in which the brightness maintains a minimum of 7% of the initial value.) Degree of Protection IP65 (IE 6529) Material Front over: Polycarbonate Resin; End over/able Gland: Polyamide Resin; able: PV sheathing (24WG) Weight (approx.) 1~24V 2g 255g 4g 52g 645g 12V/24V D 175g 235g 37g 1. 1V input for 1-24V ; 12V D input for 12V/24V D. 2. LED life is dependent on the operating environment and conditions. 13
14 LF2B Part Numbers Illumination olor White over lear over White over Rated Voltage 1-24V 12V/24V D 1-24V 12V/24V D LF2B-B (2m) LF2B-B3P-THWW2-1M LF2B-B3P-BTHWW2-1M LF2B-B4P-THWW2-1M LF2B-B4P-BTHWW2-1M LF2B- (3m) LF2B-3P-THWW2-1M LF2B-3P-BTHWW2-1M LF2B-4P-THWW2-1M LF2B-4P-BTHWW2-1M LF2B-D (58mm) LF2B-D3P-THWW2-1M LF2B-D3P-BTHWW2-1M LF2B-D4P-THWW2-1M LF2B-D4P-BTHWW2-1M LF2B-E (8m) LF2B-E3P-THWW2-1M LF2B-E4P-THWW2-1M LF2B-F (1,8mm) LF2B-F3P-THWW2-1M LF2B-F4P-THWW2-1M Part Number Structure (use for interpreting part numbers only) LF2B - 3 P - THWW2-1M Length B: 2m (8.27 ) : 3m (12.99 ) D: 58mm (22.83 ) E: 8m (32.68 ) F: 1,8mm (42.52 ) over 3: lear 4: White D12V/24V Length: B (2m), (3m), D (58mm) only ccessories Rated Voltage : 1/24V B: 12V/24V D Item Part Number Remarks Mounting Bracket (U-shape) LF9Z-1SB21 omes with the product (see Note below) Mounting Bracket (L-shape) LF9Z-1SB22 Order separately LF2B-B and - includes 2 brackets each; LF2B-E 3 brackets, and LF2B-F 4 brackets. Dimensions (mm) Brown: L (On D: + ) Blue: N able Gland (On D: ) able Length 1 able over End over Dimension Table Part Number L (mm) Inch LF2B-B P- THWW2-1M LF2B- P- THWW2-1M LF2B-D P- THWW2-1M LF2B-E P- THWW2-1M LF2B-F P- THWW2-1M 1, Illuminance harts (lear light at.5m) LF2B-B (2m) LF2B- (3m) LF2B-D (58mm) LF2B-E (8m) LF2B-F (1,8mm) Unit (mm)
15 LUMIF LF1B-N ontrol Panels Industrial Machines ommercial Display ases LF1B-N Series The LF1B-N series LED light strips are slim and perfect for applications where space is a concern. They come in six different lengths and six distinct colors, making them a very flexible lighting solution. ompact design: 27.5mm wide, 16mm high, and 134 to 1,8mm long 6 olors: cool white, warm white, yellow, red, blue, green ll units come standard with 3 meter connection cables 2 over options: clear, white IP65 degree of protection (waterproof, dustproof), suitable for use in wet locations LED Optical Specifications Illumination olor ool White Warm White Yellow Red Green Blue over lear White lear White lear White lear White lear White lear White olor Temperature/ Dominant Wavelength (typ.) 5,5K 2,9K 59nm 62nm 525nm 455nm LF1B-N 9lx 8lx 6lx 55lx 2lx 18lx 2lx 18lx 3lx 27lx 1lx 9lx LF1B-NB 22lx 2lx 145lx 13lx 4lx 36lx 4lx 36lx 6lx 55lx 2lx 18lx Reference LF1B-N 4lx 36lx 25lx 225lx 75lx 65lx 75lx 65lx 11lx 1lx 3lx 27lx Brightness (typ.) at.5m LF1B-ND 66lx 6lx 455lx 41lx 125lx 11lx 125lx 11lx 19lx 17lx 5lx 45lx LF1B-NE 82lx 74lx 56lx 5lx 16lx 145lx 16lx 145lx 26lx 235lx 6lx 55lx LF1B-NF 935lx 85lx 62lx 555lx 18lx 16lx 18lx 16lx 3lx 27lx 8lx 7lx LED modules and illumination units may vary in illumination colors and brightness. R US General Specifications Model Rated Voltage Input urrent (typ.) (at the rated current) Power onsumption (typ.) (at the rated voltage) Insulation Resistance Dielectric Strength Vibration Resistance (damage limits) LF1B-N (134mm) LF1B-NB (2m) LF1B-N (3m) LF1B-ND (58mm) LF1B-NE (8m) LF1B-NF (1,8mm) 24V D (operating voltage range: 21.6 to 26.4V) cool white/warm white/blue 6m 12m 18m 36m 54m 72m red/yellow/green 4m 8m 12m 24m 36m 48m cool white/warm white/blue 1.5W 2.9W 4.4W 8.7W 13.W 17.3W red/yellow/green 1.W 2.W 2.9W 5.8W 8.7W 11.6W 1MΩ minimum (5V D megger) 1,V, 1 minute (between live and dead parts) Frequency: 5 to 55Hz, mplitude.5mm cceleration 6m/s 2 (6G), 2 hours each in 3 axes Frequency: 5 to 55Hz, mplitude.17mm cceleration 2m/s 2 (2G), 2 hours each in 3 axes Shock Resistance (damage limits) 1,m/s 2 (1G), 5 shocks each in 6 axes /s 2 (3G), 5 shocks each in 6 axes Operating Temperature 3 to +55 (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature 35 to +7 (no freezing) Operating tmosphere No corrosive gases Life (Note) 4, hours (Ta = 25 ) (The total illumination life in which the brightness maintains a minimum of 7% of the initial value.) Degree of Protection IP65 (IE 6529) Material over: polycarbonate, End cover/cable gland: polyamide, Wire: PV (24WG) Weight (approx.) 95g 125g 165g 255g 43g 74g 1. LED life depends on the operating environment. 15
16 LF1B-N Part Numbers Illumination olor ool White Warm White Yellow Red Blue Green ppearance LF1B-N (134mm) LF1B-NB (2m) LF1B-N (3m) LF1B-ND (58mm) LF1B-NE (8m) LF1B-NF (1,8mm) LF1B-NjP-2THWW2-3M LF1B-NjP-2TLWW2-3M LF1B-NjP-2SHY2-3M LF1B-NjP-2SHR2-3M LF1B-NjP-2THS2-3M LF1B-NjP-2SHG2-3M LF1B-NBjP-2THWW2-3M LF1B-NBjP-2TLWW2-3M LF1B-NBjP-2SHY2-3M LF1B-NBjP-2SHR2-3M LF1B-NBjP-2THS2-3M LF1B-NBjP-2SHG2-3M LF1B-NjP-2THWW2-3M LF1B-NjP-2TLWW2-3M LF1B-NjP-2SHY2-3M LF1B-NjP-2SHR2-3M LF1B-NjP-2THS2-3M LF1B-NjP-2SHG2-3M LF1B-NDjP-2THWW2-3M LF1B-NDjP-2TLWW2-3M LF1B-NDjP-2SHY2-3M LF1B-NDjP-2SHR2-3M LF1B-NDjP-2THS2-3M LF1B-NDjP-2SHG2-3M LF1B-NEjP-2THWW2-3M LF1B-NEjP-2TLWW2-3M LF1B-NEjP-2SHY2-3M LF1B-NEjP-2SHR2-3M LF1B-NEjP-2THS2-3M LF1B-NEjP-2SHG2-3M LF1B-NFjP-2THWW2-3M LF1B-NFjP-2TLWW2-3M LF1B-NFjP-2SHY2-3M LF1B-NFjP-2SHR2-3M LF1B-NFjP-2THS2-3M LF1B-NFjP-2SHG2-3M In place of j insert 3 for clear cover and 4 for white cover. Part Number Structure (use for interpreting part numbers only) LF1B - N 3 P - 2 THWW2-3M Length : 134mm (5.28 ) B: 2m (8.27 ) : 3m (12.99 ) D: 58mm (22.83 ) E: 8m (32.68 ) F: 1,8mm (42.52 ) LF1B-N3P-2THWW2-15 lx 3 lx 45 lx 6 lx LF1B-ND3P-2THWW2- over 3: lear 4: White Illumination olor THWW2: ool white TLWW2: Warm white SHY2: Yellow LF1B-NB3P-2THWW2- able Length 3M: Brilliance Distribution at.5m (reference value) 3 lx 6 lx 9 lx 12 lx 15 lx SHR2: Red THS2: Blue SHG2: Green LF1B-N3P-2THWW2-1 lx 15 lx 2 lx 25 lx 3 lx LF1B-NE3P-2THWW2- LF1B-NF3P-2THWW2- Dimensions (mm) R R2.1 B 35. 3, 2.5 Dimension Table B Model mm inch mm inch mm inch LF1B-N LF1B-NB LF1B-N LF1B-ND LF1B-NE LF1B-NF ccessory lx 1 lx 25 lx 25 lx 4 lx 4 lx 5 lx 55 lx 6 lx 7 lx 1 lx 3 lx 5 lx 7 lx 9 lx Item Part No. Mounting Bracket- djustable ngle LF9Z-1MB1 Material Stainless Steel 1. 1 pair, Left and Right. 2. Not applicable to LF1B-ND.
17 LUMIF LF1 ontrol Panels Manufacturing Equipment LF1 Series LF1 LED strips use super-bright multi-chip LEDs providing illumination equivalent to a 25W fluorescent lamp, while consuming only one-third the power. They come in a thin housing available in three sizes with four color configurations: cool white (55K), warm white (28K), yellow (59nm) and red (625nm). Brightness: 66.6 Lumens/Watt Energy savings: One-third of fluorescent lamps Long life: 4, hrs (Half-life) UL Listed RoHS ompliant IP4 R US LED Optical Specifications Model LF1-*-2THWW6 LF1-*-2TLWW6 LF1-*-2SHY8 LF1-*-2SHR8 Illumination olor ool White Warm White Yellow Red Luminous Intensity (Single LED module) olor Temperature / Dominant Wavelength Reference Illuminance at.5m *LED rray 1 = 3x2, B1 = 6x2, D1 = 12x2 General Specifications 6,mcd 4,mcd 4,mcd 2,5mcd 5,5K 2,8K 59nm 625nm LED rray 3 x 2 19lx 13lx 13lx 85lx LED rray 6 x 2 38lx 26lx 26lx 17lx LED rray 12 x 2 76lx 52lx 52lx 34lx Model LF1-*-2THWW6 LF1-*-2TLWW6 LF1-*-2SHY8 LF1-*-2SHR8 Rated Voltage 24V D (non-polarized) LED rray 3 x 2 75m 9m Input urrent LED rray 6 x 2 15m 18m (at rated voltage) LED rray 12 x 2 36m LED rray 3 x 2 1.8W 2.2W Rated Power LED rray 6 x 2 3.6W 4.4W (at rated voltage) LED rray 12 x 2 7.2W 8.7W Dielectric Strength Between live and dead parts: 1V, 1 minute Insulation Resistance Between live and dead parts: 1 MΩ (5V D megger) Operating Temperature -2 to +5 Storage Temperature -25 to +7 Operating/Storage Humidity 45 to 85% RH (no condensation) Life (half luminance) 2 4, hours Weight (approx.) LF1-1: 19g, LF1-B1: 27g, LF1-D1: 47g Degree of Protection IP4 1. *LED rray 1 = 3x2, B1 = 6x2, D1 = 12x2 2. LED life depends upon operating environment
18 LF1 Part Numbers olor ool White Warm White Yellow Red Part No. LF1-*-2THWW6 LF1-*-2TLWW6 LF1-*-2SHY8 LF1-*-2SHR8 ppearance Light Spectrum *LED rray 1 = 3x2, B1 = 6x2, D1 = 12x2 Part Number Structure (use for interpreting part numbers only) L F THWW6 LED Module rrangement 1: 3 LEDs 2 rows B1: 6 LEDs 2 rows D1: 12 LEDs 2 rows LED Illumination olor THWW6: ool White TLWW6: Warm white SHY8: Yellow SHR8: Red Dimensions (mm) 55 1 R Light Distribution at.5m LF1-D1-THWW6 (ool White) (lx) B ø Dimension Table (mm) Part No. B LF LF1-B LF1-D Illuminance hart LF1-D1-2THWW6 1 5lx 5lx 1lx 2lx 5lx 5 1lx 2lx 3lx 4lx 5lx ccessory 5 1lx 5lx 5lx (mm) Item Mounting Bracket- djustable ngle Part No. LF9Z-1M1 Material Stainless Steel 1 pair, Left and Right 18
19 LUMIF LF1E Freezers Refrigerated Display ases Testing hambers LF1E Series The LF1E illumination lights are designed to be used in freezers or refrigerated display cases where the ambient temperature is as low as -4º. These energy saving units, with a long service life, compact size and low heat generation are perfect for illuminating areas with very low temperatures. Three types of light distribution: no-lens, condensing and dual Life: 7% of initial luminance at 4, hrs vailable in 4 lengths Plastic lens suitable for food industry IP54 protection against dust and water E marked, UL Listed (damp locations) R US LED Optical Specifications Illumination olor ool White Warm White olor Temperature 5K 3K Lens Type Unit Length Reference Illumination 55mm 95lx 75lx 88mm 1,1lx 9lx No Lens 1 166mm 1,2lx 95lx 145mm 1,25lx 1,lx 55mm 1,95lx 1,5lx ondensing 88mm 2,lx 1,55lx Lens 1 166mm 2,lx 1,55lx 145mm 2,lx 1,55lx Dual Lens See Illumination Distribution hart next page 1. Measured at. directly below unit General Specifications Model (length) LF1E-B (55mm) LF1E- (88mm) LF1E-D (166mm) LF1E-E (145mm) Rated Voltage Input urrent (at rated voltage) 24V D 35m (44m max) 525m (66m max) 7m (87m max) 95m (14m max) Power onsumption (typ. at rated input) 24V D 8.4W (9.7W max) 12.6W (14.6W max) 16.8W (19.4W max) 22.8W (26.3W max) Insulation Resistance Dielectric Strength Vibration Resistance (damage limits) 24V D 1 MΩ minimum (5V D megger) between input and housing 5V, 1 minute Frequency 5 to 55Hz, amplitude.17mm Shock Resistance (damage limits) /s 2 Operating Temperature Operating Humidity Storage Temperature Operating Environment Life 1 4 to to 85% RH (no condensation) 4 to +7 No corrosive gases 4, hours (The illumination duration in which the illuminance maintains a minimum of 7% of the initial value at 25º.) Weight (approx.) 2 275g 39g 515g 69g Degree of protection Material 1. LED life depends on the operating environment. 2. Dual lens type. IP54 End cover, conduit: polyamide, over: polycarbonate, able: PV, Mounting bracket: stainless steel 19
20 LF1E Part Numbers LF1E-B3S-2* (55mm) LF1E-3S-2* (88mm) LF1E-D3S-2* (166mm) LF1E-E3S-2* (145mm) warm white shown cool white shown cool white shown cool white shown * N = ool white, L: Warm white. Blank = No lens, = ondensing Lens, B = Dual Lens. Dimensions (mm) LF1E Illumination Unit onduit able Brown: L (+) Blue: N () ø5.9 able length: 3 Partially-stripped ( 2) 18 WG L over 18.8 End over 36 Part Number Structure (use for interpreting part numbers only) L F 1 E B 3 S 2 N Length (mm) B: 55 : 88 D: 1,66 E: 1,45 LED olor N: ool white (5,K equivalent) L: Warm white (3,K equivalent) Mounting Bracket (supplied) (LF9Z-1SE1) Light Distribution (Lens type) Blank: No Lens : ondensing Lens B: Dual Lens Mounting Screw (supplied) 36 When using mounting bracket 4 max. Mounting Bracket (supplied) 2 max. M4 screw (supplied) ø4.2 Thickness =.4 14 M4 P.7 ø8 1.2 max. 1 (35) Mounting Hole Layout B Minimum Radius 24 mm Recommended mounting centers (D) L 6 6 nti-rotation Hole (Use one) ø2.1 M4 P.7 tapped hole or ø4.2 hole Illuminance Distribution harts No-lens ondensing Lens Dual Lens (%) Dimension Table Model L B D No. of Mounting Brackets LF1E LF1E-B LF1E LF1E-D LF1E-E X: long side Y: short side Y (short side) image Y (short side) image Y (short side) image Illuminance harts No-lens (LF1E-E3S-2N) Y (mm) X (mm) Y (mm) ondensing Lens (LF1E-E3S-2N) X (mm) Y (mm) Dual Lens (LF1E-E3S-2NB) X (mm) ccessory Item Part No. Material Mounting Bracket djustable ngle LF9Z-1SE1 Stainless Steel 2
21 LUMIF EF1 Hazardous & Wet Locations EF1 Series Hazardous locations LED illumination units, EF1 are ideal for locations that require additional protection. With an IP67 rating, they can be used in wet locations subject to high-pressure spray. Hazardous locations LED units (lass 1, Zone 1 and Zone 2) Slim or wide models available 2 cover colors: clear or white vailable with adjustable, fixed angle or no mounting bracket IP67 (without switch) IP65 (with switch) R IE Ex *UL, TEX, and IEEx are pending approval. US LED Optical Specifications Model EF1 Illumination Surface lear Diffused ollecting Lens (Light Distribution) With Without With Without Illumination olor White olor Temperature (typ.) 57K Total Luminous Flux (typ.) 96lm Reference Illuminance (typ.) t 1.m directory below 11lx 25lx 45lx 175lx General Specifications Model EF1-11 EF1-12 Explosion protection Ex d II T4 Zone Zone 1, Zone 2 Rated voltage 24V D 1 to 24V Voltage Range 18 to 26.4V D 9 to 264V Rated Power (Typ.) 17W (at rated voltage) 19W (at rated voltage) Insulation Resistance 5MΩ minimum (5V D megger) input - FG 1MΩ minimum (5V D megger) input - FG Dielectric Strength 5V 1 minute input - FG 2V 1 minute input - FG Vibration Resistance (damage limits) Frequency 5 to 55Hz, amplitude.5mm Shock Resistance (damage limits) /s 2 Operating Temperature -2 to +5º (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature -35 to +7º (no freezing) Life 1 5, hours (The illumination duration in which the brightness maintains a minimum of 7% of initial value at 25º) Degree of Protection IP67 (IE 6529), IP65 (with pushbutton switch) Material Housing: aluminum, front panel: stainless steel, mounting bracket: stainless steel Illumination surface: reinforced glass, cable gland: nickel-plated brass Weight (approx.) 3.2Kg (without mounting bracket), 3.4Kg (with mounting bracket) 1. LED life depends upon operating environment. 21
22 EF1 Part Numbers Light Distribution Mounting Bracket Waterproof able lamp Illumination Surface Terminal Block able Gland Outer Diameter Part No. Without (4-M6 screw on the back of EF1) With Without EF1-1o Wm - n EF1-1o Wm - Wn Narrow With (Fixed angle) With Without EF1-1o Wm - n EF1-1o Wm - Wn With (djustable angle) Without (4-M6 screw on the back of EF1) With Without With Without Blank: lear 1: Diffused Blank: Spring lamp Terminal S: Screw Terminal : Lead Wire 1: ø8-ø1 12: ø1-ø12 14: ø12-ø14 16: ø14-ø16 EF1-1o Wm B- n EF1-1o Wm B- Wn EF1-1o W - n EF1-1o W - Wn Wide With (Fixed angle) With Without EF1-1o W - n EF1-1o W - Wn With (djustable angle) With Without EF1-1o W B- n EF1-1o W B- Wn In place of j insert Illumination Surface code, in place of k insert able Wiring code, in place of l insert able Outer Diameter code, in place of m insert able Gland/Switch code, in place of ninsert Pushbutton Switch code and in place of o insert the Voltage code. Part Number Structure (use for interpreting part numbers only) Voltage o 1: 24V D 2: 1 to 24V Illumination Surface j Blank: lear 1: Diffused Light Distribution Blank: lear 1: Wide able Outer Diameter l (Male connection thread) 1: ø8 to 1 (G1/2) 12: ø1 to 12 (G1/2) 14: ø12 to 14 (G3/4) 16: ø14 to 16 (G3/4) EF W 1 P S 12 W 2 Dimensions (mm) without mounting bracket Illumination surface xis center able gland / Switch m Legend able gland Switch Blank T P With cable gland on the one side With cable gland on both sides With cable gland on the one side Light Distribution (cd/1lm) Without Without With able Wiring k Blank: Spring clamp terminal S: Screw terminal : Lead wiring able lamp Blank: Watertight W: Not Watertight Pushbutton Switch n 2: Extended (Maintained) Illumination Surface Blank: Without : With fixed angle mounting bracket B: With adjustable angle mounting bracket M6 Depth 9mm Narrow light distribution type Wide light distribution type Illumination surface: clear glass Illumination surface: diffused glass Illumination surface: clear glass Illumination surface: diffused glass B B B B Illuminance Distribution (at 1.m) Narrow light distribution type (lx) Wide light distribution type (lx) Illumination surface: clear glass Illumination surface: diffused glass Illumination surface: clear glass Illumination surface: diffused glass
23 LUMIF LF1F Visual Inspection Lighting Elevator eiling Lighting LF1F Series Unlike fluorescent lights, LED lights do not flicker and therefore illuminate objects evenly. Uneven surfaces, such as scratches and flaws, are more visible providing more accurate inspections. The LF1F provides steady light regardless of ambient temperature and the narrow profile saves space allowing mounting flexibility. Energy saving Long operating life Maintenance free 12mm-thin bezel saves space m square illuminated surface Wider operating temperature range than fluorescent lighting LED Optical Specifications Model LF1F olor Temperature 8,5K Reference Illuminance at 1.m Operating Specifications Model Operating Voltage Range Wattage (typ.) Insulation Resistance Dielectric Strength Vibration Resistance 5,8lx minimum (panel center) LF1F 21.6 ~ 26.4V D 11W 1MΩ minimum 1,V, 5/6Hz, 1 minute 5 ~ 55Hz, amplitude.5mm, 6m/s 2 (3 directions, 2 hours each) Shock Resistance 1,m/s 2 Operating Temperature -1 ~ 6 (no freezing) Operating Humidity 45 ~ 85% RH (no condensation) Storage Temperature -2 ~ 7º (no freezing) Operating Environment No corrosive gases, no harmful dust Life 1 4, hours Degree of Protection IP2 (IE6529) Housing: luminum Materials Light emitting part: acrylic; over: acrylic Weight (approx.) 1.1kg 1. LED life depends upon operating environment. Part Numbers ppearance Model able Length Size olor Temperature LF1F-B4-2D1 LF1F-B4-2D3 m square 8,5K pplications Ideal for visual inspection, as the LF1F makes it easy to see even the slightest surface flaws. pplication examples for product inspections Detect uneven plastic and rubber part surfaces Detect dust on glass or plastic plates Illuminate marks on metal surfaces during cutting and marking Detect flaws on painted or plated surfaces Detect scratches and unevenness on embossed materials Detect scratches and foreign materials on silicon wafers Elevator illumination Dimensions (mm) m or m / 6. Light emitting plane Light emitting plane: 271 x 271 Housing 21 23
24 LED Signalight Towers - LD6 Unique Striped Design Improves Visibility Looking for a safe and reliable way to instantly see the status of a machine or a process? The LD6 Signalight Tower s innovative striped design with non-illuminated area between the lenses, and the oval lens shape provide high-visibility from different directions. With five different mounting styles, flashing and audible alarm options and with a protection rating up to IP65, there is an LD6 that will fit your signaling needs. Support Information IDE LED Illumination Technical Support support@ide.com IDE Think utomation and beyond... US IDE orporation Tel: (48) opencontact@ide.com anada IDE anada Ltd. Tel: (95) sales@ca.ide.com ustralia IDE ustralia Pty. Ltd. Tel: sales@au.ide.com Japan IDE orporation Tel: marketing@ide.co.jp United Kingdom IDE Electronics Ltd. Tel: sales@uk.ide.com Germany IDE Elektrotechnik GmbH Tel: service@ide.de Hong Kong IDE (H.K.) o., Ltd. Tel: info@hk.ide.com 213 IDE orporation. ll Rights Reserved. atalog No. LF9Y-B1-3 5/13 1K hina/beijing IDE (Beijing) orporation Tel: hina/shanghai IDE (Shanghai) orporation Tel: idec@cn.ide.com Specifications and other descriptions in this catalog are subject to change without notice. hina/shenzhen IDE (Shenzhen) orporation Tel: Singapore IDE sia Pte. Ltd. Tel: info@sg.ide.com Taiwan IDE Taiwan orporation Tel: service@tw.ide.com
IDEC LUMIFA Family LED Lighting Solutions
IDE LUMIF Family LED Lighting Solutions LUMIF Lighting your way For over three decades, IDE has produced LEDs for applications requiring indicator lights and signaling towers. That is why it was a natural
More informationLED Machine Lighting
Key features Mini (LF1D-C) Location Length LF1D (IP69K) and LFD (IP67, IP67f) Series Machine Tools Food & Beverage Processing Equipment Vision Systems With their rugged construction, the LF1D/D series
More informationLUMIFA LF1B-N. Industrial Machines Semiconductor Equipment Control Panels
LUMIFA LF1B-N Industrial Machines Semiconductor Equipment Control Panels PRODUCT DESCRIPTION The LF1B-N series is available in six lengths, two covers (transparent or white) and six distinct colors cool
More informationLED Illumination Units
LED Illumination Units LF1E IP54 LF1D-C (mini) LF1D/LF2D IP67F IP67 IP69K LF1D-EH/FH LF2D-EH/FH LF1D-H/LF1D-J (long) EF1 IP67 LF1B-N IP65 LF1 IP4 LF2B IP65 LED Illumination Unit LED Illumination Unit Selection
More informationLumifa. LED Lighting. Selection Guide... 2 Heavy Duty Machine Tool Lighting... 4 LF1D and LF2D Series... 4
Selection Guide... 2 Heavy Duty Machine Tool Lighting... 4 LF1D and LF2D Series... 4 General Machine Lighting... 11 LF2B Series...11 LF1B-N Series...13 LF1A Series...15 Hazardous Location Lighting... 17
More informationLumifa. LED Lighting. Seletion Guide Heavy Duty Machine Tool Lighting... 4 LF1D & LF2D Series...4
LED Lighting Seletion Guide... 2 Heavy Duty Machine Tool Lighting... 4 LF1D & LF2D Series...4 General Machine Lighting... 11 LF2B Series...11 LF1B-N Series...13 LF1A Series...16 Refrigerator, Freezer,
More informationLumifa. LED Machine Lighting. Selection Guide... 2
Selection Guide... 2 General Machine Lighting... 3 LF1B-N Series...3 LF2B Series...6 LF1A Series...9 Heavy Duty Machine Tool Lighting... 11 LF1D & LF2D Series...11 Refrigeration and Freezer Lighting...
More informationLF1D/LF2D LED Illumination Units
LF1D/LFD LED Illumination Units Wide-area lighting for improved target visibility. wide variety of sizes and light distribution angles. Durable and environmentally resistant LF1D-C LF1D-J LF1D-H LF1D-EH,
More informationLED Illumination Units
LE Illumination Units LF1E IP54 LF1- (mini) LF1/LF IP67F IP67 IP69K LF1-EH/FH LF-EH/FH LF1-H/LF1-J (long) EF1 IP67 LF1-N IP65 LF1 IP4 LF IP65 (13//15) LE Illumination Unit TM LE Illumination Unit Selection
More informationLUMIFA LED Light Strips Long-lasting & so bright you gotta wear shades!
LUMIFA LED Light Strips Long-lasting & so bright you gotta wear shades! LF1A Series shown As IDEC continues to move towards a green future, we are excited to announce the LUMIFA series of LED light strips,
More informationLED Illumination Units
LED Illumination Units LF1D/LF2D IP67f LF1B IP54 LF1A IP4 LF1B-N IP65 LF1E IP54 LED Illumination Unit TM LED Illumination Unit Selection Lineup Shape Application Examples Illumination Color K: Color Temperature
More informationIlluminated buzzer for elevators, robots and production sites
ø22mm HW1Z Illuminated Buzzer Illuminated buzzer for elevators, robots and production sites Combination buzzer and pilot light Alerts workers of danger with sound and light Waterproof construction HW1Z
More informationLD6A. LED SignaLight Towers. Clear, audible alarm sound. Warning/caution indicated by flashing light. Complies with IEC Standards (IEC60073)
LD6A LED SignaLight Towers Steady/Flashing/Alarm Warning/caution indicated by flashing light Complies with IEC Standards (IEC073) Clear, audible alarm sound 3.3 khz 70 to 90 db 2 3 4 5 LD6A LED SignaLight
More informationThink Automation and beyond... Focused brightness and visibility. IDEC LD6A LED Signalight Towers
Think Automation and beyond... Focused brightness and visibility IDEC LD6A LED Signalight Towers LD6A Signalight Towers Ergonomically designed for instant visual & audible recognition LD6A SignaLights
More informationPRODUCT SPECIFICATION. Stack Lights. Series.
PRODUCT SPECIFICATION Stack Lights Series www.wernerelektrik.com Light Color Significance... Specifications... Functional Specification... Model Number Structure - Stack Lights... Model Number Selection...
More informationSignaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility
Unique Striped Design Improves Visibility Key features of the LD6A LED SignaLight Towers include: The striped design with non-illuminated area between the lenses makes the illuminated color very visible.
More informationLED Lights Singal Tower
LED Lights Singal Tower 145 CLA CLA LED Light Bar CLA-2S-CD Daylight, Amber Natural White IP66/67/69K Luminous Color CLA-3S-CD CLA-6S-CN More than a diffusion LED light bar, it can be used in places like
More information400W High Intensity LED Light - 54,000 Lumens V AC - Bar Clamp/Trunnion Mount - Outdoor
400W High Intensity LED Light - 54,000 Lumens - 347-480V AC - Bar Clamp/Trunnion Mount - Outdoor Part #: GAU-LTL-400W-LED-480V-BC Page: 1 The GAU-LTL-400W-LED-480V-BC from Larson Electronics is a High
More informationCircuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions...
Switching & ontrols Selection Guide... 1028 1V Series... 1029 Dimensions... 1035 www.ide.com/circuitbreaker ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal
More informationLW Series offer flexibility in space-saving package
ourtesy of Steven Engineering, Inc. 230 yan Way, South San Francisco,, 94080-6370 Main Office: (650) 588-9200 Outside Local rea: (800) 258-9200 www.steveneng.com LW Series offer flexibility in space-saving
More informationAP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer
AP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer Pilot Lights / Buzzer Selection Guide Series AP Series Miniature Pilot Lights AP6S Series Miniature Pilot Lights Mounting Hole Size ø6 ø2
More informationø12 A2 Series Miniature Control Units
ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series
More informationLED Lighting. LED Reflector. LED Downlight. LED Tube. LED Plug-in Tube. LED Sensor Batten. LED Floodlight. LED Lighting
LEDAZ Solution meets clients every lighting requirement, covering a wide range of product portfolio including LED Reflector, LED Downlight, LED Tube, LED Plug-in Tube, LED Sensor Batten and LED Floodlight.
More informationHS1C-P Interlock Plug Unit with Door Lock
HSC-P Unit with Lock Interlock plugs with door lock mechanism for high level safety management. Installing the actuator on the guard door and the interlock switch on the machine, the guard door can be
More information160 Watt High Intensity LED Flood Light - 24 LEDs - 20,500 Lumens W Halogen Equivalent
160 Watt High Intensity LED Flood Light - 24 LEDs - 20,500 Lumens - 1000W Halogen Equivalent Part #: LEDL-160W Page: 1 Buy American Compliant The LEDL-160W LED Flood Light offers high output from a compact
More informationBright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
More informationø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationNRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute
RA Series RA Series RAS RA Key features of the RA series include: Available in 4 different styles Excellent overload and short circuit protection Small size and high-efficiency Life expectancy of over
More information300 Watt LED Pole Top Light Fixture VAC W Metal Halide Equivalent - Slip Fit Yoke
300 Watt LED Pole Top Light Fixture - 120-277VAC - 1000W Metal Halide Equivalent - Slip Fit Yoke Part #: GAU-PT-60X5W-ACS-1227 Page: 1 Made in the USA The GAU-PT-60X5W-ACS-1227 High Output LED Pole Top
More information300 Watt LED High Bay Light Fixture VAC W Metal Halide Equivalent - 29,580 Lumens
300 Watt LED High Bay Light Fixture - 120-277VAC - 1000W Metal Halide Equivalent - 29,580 Lumens Part #: GAU-HB-60X5W-1227 Page: 1 Buy American Compliant The GAU-HB-60X5W-1227 High Output LED High Bay
More informationIndicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order
Series 14.5 mm 0.5 mm IP67 5 50 V INDITOR pushbutton keylock selector buzzer hoose one component from each of the coloured sections to assemble a complete switch. Product Profile Indicator The Series 14
More informationHS1L Interlock Switches with Solenoid
3000N locking strength (strongest* in class)! Suitable for large and heavy doors. Same actuators as HS1E (locking strength 3000N) can be used. Six contacts in a compact housing (same size as HS1E)! Same
More information14W Linear 2' LED Light Lumens - IP66 - UL 1598A - Stainless Steel Mounting Brackets/Hardware
14W Linear 2' LED Light - 1750 Lumens - IP66 - UL 1598A - Stainless Steel Mounting Brackets/Hardware Part #: WDL-24-1L-SS-2X5FT Page: 1 Made in Texas Providing 1,750 lumens of clean, crisp white light
More information500 Watt Portable LED Work Area Light Cart ft cord - 60,000 Lumens V AC
500 Watt Portable LED Work Area Light Cart - 100 ft cord - 60,000 Lumens - 120-277V AC Part #: WAL-WBC-500LTL-LED-100 Page: 1 Made in the USA The WAL-WBC-500LTL-LED-100 Cart Mounted LED Work Area Light
More informationIndicators. Introduction
Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design
More informationSwitches & Pilot Devices
ø16mm - A6 Series A6 Series Miniature Switches and Pilot Devices: 16mm Key features: 16mm (/8 ) mounting hole ED illumination ompact design saves space Momentary, Maintained, Selectors, and E-Stops Gold-clad
More informationHS1L Interlock Switches with Solenoid
3000N locking strength (largest in class)! * Suitable for large and heavy doors. Same actuators as HS1E (locking strength 3000N) can be used. *As of October 2009, according to IDEC research of plastic
More informationHS1C Interlock Switches with Solenoid
HSC es with The guard door remains locked until the machine stops completely. With the actuator mounted on the guard door and the interlock switch on the machine, the door is mechanically locked when closed.
More informationSA1W: Water Detection Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable
More informationMW Series Control Units
IP waterproof and dust-proof enclosure Suitable for installation in harsh environment, such as construction machines Prevents entry of sand and dust. eliable operation under high operation load Solder/tab
More informationIVR15-SPI Solid State Illuminated Rail 2 Post Integral Power Supply
IVR15-SPI - 1.5 Solid State Illuminated Rail 2 Post Integral Power Supply 1.50 recognized 0.3 90 PERTURE Ends of Illuminated rail field cuttable to a minimum of 2 1/8 in length. Illuminated rail is available
More informationCylindrical Sensors CY-100 SERIES panasonic-electric-works.net/sunx. Cylindrical Inductive Proximity Sensor GX-M SERIES.
Cylindrical Sensors Photoelectric Sensor CY-100 SERIES Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Cylindrical Inductive Proximity Sensor GX-M SERIES Cylindrical Photoelectric
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationIndicators. Introduction
Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design
More informationLighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
More informationCircuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions Accessories
Switching & ontrols Selection Guide... 922 1V Series... 923 Dimensions... 929 Accessories... 932 ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks
More informationRelays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada
Key features: SPDT through PDT, 0 contacts Midget power type relays vailable in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. Series Power
More informationSA1W: Water Detection Sensors SA1W-FN1 SA1W-FN2 SA1W-FP1 SA1W-FP2
The SA1W is the fastest, most reliable liquid detection sensor on the market. Using a laser beam tuned to the resonant frequency of an H 2 O molecule, the SA1W is able to detect any liquid containing water
More informationGeneral Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
More informationHead Removal Detection Function for Safer Performance
HS5D Miniature Interlock Switches Head Removal Detection Function for Safer Performance (00405) New Generation Miniature Interlock Switches IDEC s new unique Head Removal Detection Function is a new generation
More information1000 Watt High Intensity LED Light - 110,000 Lumens V AC - High Mast / Stadium Lighting
1000 Watt High Intensity LED Light - 110,000 Lumens - 120-277V AC - High Mast / Stadium Lighting Part #: GAU-HB-1000W-LED Page: 1 The GAU-HB-1000W-LED from Larson Electronics is a High Mast Stadium LED
More informationLightWave Lighting Technology
LightWave Lighting Technology About the company Since the inception of the company in 1998, LightWave has utilizes its expertize in lighting technology to make products that are energy efficient, cleaner
More informationLighting conditions. Always one idea ahead.
Lighting conditions Always one idea ahead. A world of unlimited possibilities. It is environmentally friendly. It is efficient. It is convenient. It is not without reason that LED lights are growing ever
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationLED Floodlights. Product Features. Applications
LED Floodlights V-TAC's LED Floodlights are ideal for lighting Driveways, Gardens and Buildings. These energy efficient lights emit Bright, Vibrant Light and are an eco friendly replacement for traditional
More informationCase IH 2388 Combine LED Light Package - (2) LEDEQ-3X3-CPR - (6) IL-LED-DLR-4X6 - (4) IL-LED-27R
Case IH 2388 Combine LED Light Package (2) LEDEQ3X3CPR (6) ILLEDDLR4X6 (4) ILLED27R Part #: LLPCIHCMB2388 Page: 1 The LLPCIHCMB2388 LED Combine Light Package comes with 2 LEDEQ3X3CPR LED Work Lights for
More informationTMU045018HLXXXA,TMU045018HLXXXB
TMU04508HLXXX,TMU04508HLXXXB onstant urrent Linear Module OMPLINT High Density, high brightness chip array for use in lass Linear applications onstant current for maximum efficacy Onboard connector for
More informationHS6B Subminiature Interlock Switches
World-class compactness with three poles of contacts. World s smallest switch: 30 30 78 mm Dual contacts and monitor contacts achieve the highest safety category (ISO 13849-1, EN 954-1) Two actuator entry
More informationChamp MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
More informationccessories (sold separately) Name ppearance O.D. Mounting bracket Protective cover Spatter-guarded protective cover For M12 For M18 For M30 For M12 Fo
D3-Wire ylindrical Proximity Switches Model FL7M Extensive lineup includes M8 to M30 sizes, with NPN and PNP output models available for each. ompact size saves space Indicator lamp can be checked even
More information18 Watt LED Flood Light Lumens - Six 3-Watt LEDs Volt DC - IP67 Waterproof
18 Watt LED Flood Light - 1400 Lumens - Six 3-Watt LEDs - 10-32 Volt DC - IP67 Waterproof Part #: IL-LED-18 The IL-LED-18 LED Light Bar offers high light output from a compact form factor and is ideal
More information7. 4 th Stack Lens Color
Industrial Tower Lamps Ø56mm; Bulb Type with Buzzer TBK Model Number Legend 1 2 1. Series TBK 2. Type www.inno.sg/tbk 3 4 5 6 7 8 9 B: Direct Mount (no pole) P: Direct Mount S: Panel Mount 3. Indication
More informationHS1L Interlock Switches with Solenoid
HS1L Interlock Switches with Solenoid 3000N locking strength (largest in class)! * Suitable for large and heavy doors. Same actuator as HS1E (actuator retention force 3000N) Six contacts in a compact housing
More information800 TO 2800 LUMEN 4 LED CYLINDER HYPERBOLIC/PARABOLIC/WALLWASH OPEN APERTURE
ENVIRONMENTALLY FRIENDLY, ENERGY EFFIIENT Lumen packages suitable for ceiling heights ranging from 8 to over 35 Efficacies up to 111 lm/w Superior-quality white LED light output using hip on oard technology
More informationHigh Intensity Colored LED Light - 90 Watts - 30 LEDs - Red, Amber, Green, Blue
High Intensity Colored LED Light - 90 Watts - 30 LEDs - Red, Amber, Green, Blue Part #: LEDP5W-30XC Page: 1 Buy American Compliant The LEDP5W-30XC LED Light offers high output from a compact form factor
More informationsensors SA1C-F High-speed Fiber Optic: SA1C-F
High-speed Fiber Optic: Key features: Ideal for remote sensing applications Featuring quick-connect cable and easy-insert fiber optic units for simple installation Through-beam and reflected-light sensing
More informationRELUCENT L I G HTING
L I G HTING URGIAL THEATER LIGHTING YTEM OF THE FUTURE s surgical lighting products change the way operating room lighting is powered and controlled. s new External Field Illuminator sets new standards
More informationWater, vibration and oil resistant LED work light, suitable for machine tools applications and high temperature water cleaning environments
67 69K Water, vibration and oil resistant LED work light, suitable for machine tools applications and high temperature water cleaning environments Common Specifications(QML/ QMHL) Excellent oil resistance
More informationAdjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
3 Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.549~ guide... P.3~ General precautions... P.55~ PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
More informationDC2-Wire Cylindrical Long-Distance No-Polarity Proximity Switches
D-Wire ylindrical Long-Distance No-Polarity Proximity Switches FL7M Series Rigid structure reduces damage from collision with workpiece. Long sensing distance (M: mm, M: mm, M: 5 mm) D -wire switch with
More informationLED ARCHITECTURAL LIGHT
ARCHITECTURAL LIGHT architectural lighting is mainly used for decoration and highlight in extension building frame, landscape lighting for gardens, parks, pools and fountains by offering colorful changing
More informationClass 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh
Class 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh Part #: HALP-48-2L-LED Page: 1 Made in the USA The Larson Electronics HALP-48-2L-LED Hazardous Area
More informationQ SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification Q19_VOY1603R1US Features 19mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
More informationA Metal Head That's. Highly Durable and Provides Long-distance Detection. mm 7(M18 Model) Proximity Sensor with All-stainless Housing E2EF NEW
NEW Proximity Sensor with All-stainless Housing EEF Standard Model (Completely stainless- housing) A Metal Head That's * Highly Durable and Provides Long-distance Detection mm 7(M18 Model) *More than 0
More informationQ SERIES Ø16mm (.630") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification VOYC1603R1US Features 16mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
More information1000W High Intensity LED Crane Light - 110,000 Lumens V AC - Stainless Steel Bracket
1000W High Intensity LED Crane Light - 110,000 Lumens - 347-480V AC - Stainless Steel Bracket Part #: GAU-HB-1000W-LED-SS-480V Page: 1 The GAU-HB-1000W-LED-SS-480V from Larson Electronics is an LED Crane
More information2014 / Verlichting
14 / 15 Verlichting SPOTLIGHT - HALOGEN SUNNEX HT 10W HALOGEN Sunnex HT is a small and convenient universal light which is ideally suited for all types of precision work. Supplied with a 10W halogen bulb,
More information136W Wash Down LED Light - 120/277V AC - Food Safe - IP66 Rated - Trunnion Mount
136W Wash Down LED Light - 120/277V AC - Food Safe - IP66 Rated - Trunnion Mount Part #: WDL-48-400W-LED-TRN-WCM Page: 1 This WDL-48-400W-LED-TRN-WCM Wash Down LED Fixture offers 19,773 lumens of crisp
More informationWLS28-2 LED Strip Light
WLS8- LED Strip Light Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose LED light for machine,
More informationSimple Pressure Level Setting. The threshold level is able to adjust simply. Just set the pointer suitable for the displayed pressure level.
SERIES LED Bar Display Mechanical Switch is Out of Date Choose the Contemporary Pressure Sensor with LED Bar Display Marked Conforming to EMC directive Bright LED Bar Display Easy to read the pressure
More informationMagnetic Overcurrent Circuit Breaker
Magnetic Overcurrent Circuit Breaker 808-... Description ngle pole miniaturised magnetic circuit breakers with unique highspeed operating mechanism and push/pull on/off manual actuation. Fitted with electrically
More informationPLUTO SPOTLIGHT - LED. Features include. Applications. Benefits
Spotlight LED SPOTLIGHT - LED PLUTO Pluto is a designed LED light for industrial and other applications where a small size & flexibility is of importance. Typical application areas: machine tools, vehicles,
More informationMagnetic Mount 60 Watt Low Profile LED Flood Light - Glare Shield - 10' Cord V AC
Magnetic Mount 60 Watt Low Profile LED Flood Light - Glare Shield - 10' Cord - 120-277V AC Part #: LEDWP-600E-M-10C Page: 1 The LEDWP-600E-M-10C Magnetic Mount LED Flood Light offers high light output
More informationLighted PushButton Switch
Lighted PushButton Switch Cylindrical 8mm dia. Subminiature Series Featuring Short Mounting Depth Round, square and rectangular LED pushbutton units. types also available. Requires only 18mm mounting depth.
More informationDC2-Wire Spatter-Guarded Cylindrical Proximity Sensors. Operation mode N.O. N.C. N.O. N.C. N.O. N.C. 10mm
D-Wire Spatter-Guarded ylindrical Proximity Sensors FL7MSeries variety of anti-spatter measures make these sensors the optimum for welding processes on the automotive production line. With Teflon coating
More informationNEW PRODUCTS MAY 1, NEW PRODUCTS. MEP-81000WL POWER CENTER PAGE 3 To watch the video go to
MEP-81000WL POWER CENTER PAGE 3 To watch the video go to www.maxxima.com/mep-81000wl MAY 1, 2018 25 PANOR CORP/MAXXIMA 125 Cabot Court, Hauppauge, NY 11788 USA Tel: 631.434.1200 1.866.MAXXIMA Fax: 631.952.0349
More informationWLS28-2 LED Strip Light
Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose LED light for machine, enclosure, or
More informationElectronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
More informationSnowball Lighting Limited COMMERCIAL LIGHTING LED PANEL SERIES
Snowball Lighting Limited COMMERCIAL LIGHTING LED PANEL SERIES LED PANEL LIGHT Contemporary design meets cutting-edge technology in the LED panel ranges from Snowball. Ultra-slim and edge-lit for even
More informationDEMANDING ENVIRONMENT
DEMANDING ENVIRONMENT Demanding Environment Bering Celsius 70 Einstein 133 Einstein Agro 2.1 2.2 2.3 2.4 Fahrenheit 70 Niepce 70 FV Pascal Pauli 1 HT 2.5 2.6 2.7 2.8 Pauli 2 LT 2.9 BERING The Bering is
More informationLinear fittings EVD Fluorescent fitting - zones 21 & 22
DTS LIER FITTIGS - EVD FLUORESET FITTIG - ZOES 21 & 22 83 EVD Fluorescent fitting - zones 21 & 22 Features Double central locking for ingress protection ll components mounted on hinged and removable gear
More informationHigh Performance LED High Bays
High Performance LED High Bays www.vm5lighting.com 135 Lumens Per Watt Our DLC 4.0 Premium LEDs shine bright while using less energy than most high bays. High performance high bay built for versatitlity.
More informationLW Silhouette Series. Illuminated Key Selector Switches Pushbuttons and Illuminated Pushbuttons with Round Guard. LW Silhouette Switches
W Silhouette Series Illuminated Key Selector Switches Pushbuttons and Illuminated Pushbuttons with ound Guard W Silhouette Switches W Silhouette Series Illuminated Key Selector Switches The two-way split
More information156W Explosion Proof Portable LED 360 Degree Flood Low Profile Light System - 2ft - Tank Cleaning
156W Explosion Proof Portable LED 360 Degree Flood Low Profile Light System - 2ft - Tank Cleaning Part #: EPL-360-3XLP24-LED-V2-100 Page: 1 Made in Texas The EPL-360-3XLP24-LED-V2-100 Portable Explosion
More informationWORKING IN THE BEST LIGHT High bay lighting
03 - High bay lighting WORKING IN THE BEST LIGHT. Durable, sturdy and with low energy consumption: This is what distinguishes modern hall/arena lighting and is exactly where GIFAS comes in with its lighting
More informationEVERLIGHT ELECTRONICS CO., LTD.
Features Side view white LED White SMT package Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant
More informationKFD / KFT / KFR Series
Incandescent Annunciator Lights KF / KFT / KFR Series KF-27F 27H 27V KF-37F 37H 37V KF-50F 50H Features Available in a variety of lighting panel sizes. 12 indicators (8 flat and 4 diagonal models) ranging
More information2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22)
. Ex-Linear LED light fittings ellk/m 9 LED 400/800 / ellk/m 9 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1,, 1, ) The efficient solution for your explosion-protected lighting concept The explosion-protected
More informationExample: DWAE51L840-4-UNV-MD360W. Lumen Package Color Temp. Length Voltage Driver Options Installed
Industrial Vaporlume DW Project: Location: Cat.No: Type: Lamps: Notes: Qty: 4', wet location, 3500, 4300, 5100 or 7000 lm The Philips Day-Brite / Philips CFI Vaporlume wet location industrial DW is designed
More information