Simple Pressure Level Setting. The threshold level is able to adjust simply. Just set the pointer suitable for the displayed pressure level.

Size: px

Start display at page:

Download "Simple Pressure Level Setting. The threshold level is able to adjust simply. Just set the pointer suitable for the displayed pressure level."

Silvester Daniel
5 years ago
Views:

SERIES LED Bar Display Mechanical Switch is Out of Date Choose the Contemporary Pressure Sensor with LED Bar Display Marked Conforming to EMC directive Bright LED Bar Display Easy to read the

1 SERIES LED Bar Display Mechanical Switch is Out of Date Choose the Contemporary Pressure Sensor with LED Bar Display Marked Conforming to EMC directive Bright LED Bar Display Easy to read the pressure level as red bar LEDs indicate it. (Indication resolution :.5% F.S.) LED bar display Simple Pressure Level Setting The threshold level is able to adjust simply. Just set the pointer suitable for the displayed pressure level. Pointer Reliable and Durable Mechanical switch easily breaks when pressure fluctuates excessively. The diffused semiconductor transducer makes the, series reliable and durable. Sub-scale The series scales pressure in kgf/cm or in cmhg additionaly for those who are used to such unit. Main scale Sub scale As the adjuster is rotated, the pointer turns around. The threshold level is set at the value indicated by the pointer. Wide Variation The series also provides the and European models. European Pressure unit (Sub-scale) kgf/cm ( pressure) cmhg psi bar Output mode NPN NPN PNP Pressure port R1/4 and M5 female thread NPT1/4 and -3 G1/ and M5 female thread Front protective cover Mechanical switch Panel Mounting Bracket The panel mounting is available with the panel mounting bracket. Panel mounting bracket Applicable panel ( thickness 1 to 3.mm ) 55

2 kgf/cm kgf/cm kgf/cm APPLICATIS Observing base pressure on compressor Observing added pressure to dispenser Confirming suction of workpieces OUT 1/ STEP ORDER GUIDE pressure Type 1 type European Appearance -1 OUT 1/ STEP Rated pressure range 0 to1 {0 to76cmhg} 0 to1 {0 to.6psi} 0 to1 {0 to1.01bar} Model No. Pressure port Output -0-0N -0E R1/4 and NPT1/4 and -3 G1/ and OUT 1/ STEP NPN open-collector PNP open-collector pressure 1MPa type 0 type European European OUT 1/ STEP kgf/cm 0 to 0 {0 to 1.0kgf/cm } 0 to 0 {0 to.5psi} 0 to 0 {0 to 1bar} 0 to 1MPa {0 to.kgf/cm } 0 to 1MPa {0 to 5psi} 0 to 1MPa {0 to bar} -1-1N -1E - -N -E R1/4 and NPT1/4 and -3 G1/ and R1/4 and NPT1/4 and -3 G1/ and NPN open-collector PNP open-collector NPN open-collector PNP open-collector OPTI Designation Model No. Description Sensor mounting bracket Sensor mounting bracket MS--1 L-shaped bracket (Two M3mm screws with washers are attached.) Panel mounting bracket MS-- For mounting on a panel Front protective cover MS--3 For protecting the adjustable front surface Two M3mm screws with washers are attached. Panel mounting bracket and Front protective cover Front protective cover Panel mounting bracket 553

3 SCIFICATIS pressure pressure Type 1 type 0 type 1MPa type European European European Item Model No. -0-0N -0E -1-1N -1E - -N -E Pressure scale Gauge pressure Rated pressure range Setting pressure range 0 to1 0 to1 0 to1 0 to 0 0 to 0 0 to 0 0 to 1MPa 0 to 1MPa 0 to 1MPa {0 to76cmhg} {0 to.6psi} {0 to1.01bar} {0 to 1.0kgf/cm } {0 to.5psi} {0 to 1bar} {0 to.kgf/cm } {0 to 5psi} {0 to bar} to90 to90 to90 to 90 to 90 to to 0.9MPa 0.1 to 0.9MPa 0.1 to 0.9MPa { to6cmhg} {1.45 to.1psi} {0.1 to0.9bar} {0.1 to 0.9kgf/cm } {1.45 to.1psi} {0.1 to 0.9bar} {1.0 to 9.kgf/cm } {.5 to 1psi} {1 to 9bar} Pressure resistance MPa Applicable fluid Hysteresis Repeatability Supply voltage Current consumption Non-corrosive gas Approx. 5%F.S. 1%F.S. or less 1 to 4V DC% Ripple P-P % or less 40mA or less Output Utilization category Output operation Short-circuit protection Response time Pressure display Indication resolution Operation indicator Power indicator Pollution degree Protection Ambient temperature Ambient humidity EMC Voltage withstandability Insulation resistivity Vibration-proof Shock-proof Temperature characteristic Environmental resistance < > NPN open-collector Maximum sink current : 0mA Applied voltage : V DC or less Residual voltage : 1V or less (at 0mA sink current) 0.4V or less (at 16mA sink current) <European> PNP open-collector Maximum source current : 0mA Applied voltage : V DC or less Residual voltage : V or less (at 0mA source current) DC-1 or DC- Selectable either High- or High- with the control input wire Incorporated ms or less Indication with red LED bar plus 1/ step indicator (Green LED).5%F.S. or less Red LED (lights up when the output is activated) Red LED (lights up while the power is supplied) 3 (Industrial environment) IP40 (IEC) 0 to 50C (No dew condensation), Storage : to60c 35 to 5%RH, Storage : 35 to 5%RH Emission : EN5001-, Immunity : EN500-1,000V AC for one min. between all terminals connected and enclosure 0MΩ or more at 500V DC Megger between all terminals connected and enclosure to 150Hz frequency, 0.75mm amplitude, and X, Y, and Z directions each for two hours (unenergized) 0m/s acceleration (approx. 50G), and X, Y, and Z directions each for three times (unenergized) 5%F.S. or less of detection pressure at 5C in 0 to50c temperature range Pressure port Material Cable Cable extension Weight : R1/4 and : NPT1/4 and 3 European : G1/ and Front case Rear case : PBT, Front face : Polycarbonate, Pressure port : Brass (Nickel plated) Cabtyre cable 0.5m long with four 0.1mm conductors Maximum extension is 0m overall with an equivalent cable with conductors 0.1mm or more Approx. 5g 554

4 I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagram Sensor circuit NPN output type Tr D Internal circuit ZD Color code (Brown) V (Black) Output 0mA max. (Blue) 0V (Pink) Control input Users' circuit Symbol... D : Reverse polarity protection diode ZD: Surge absorption zener diode Tr : NPN output : Logical output operation by control input 1Connect to V or Open Connect to 0V 1 to 4V DC % Wiring diagram 0 OUT / STEP kgf/cm Brown Black Blue Pink 1 to 4V DC % PNP output type I/O circuit diagram Color code Wiring diagram Sensor circuit Tr ZD Internal circuit D (Brown) V 0mA max. (Black) Output (Blue) 0V (Pink) Control input Users' circuit Symbol... D : Reverse polarity protection diode ZD: Surge absorption zener diode Tr : PNP output 1 to 4V DC % E bar OUT 1/ STEP Brown Black Blue Pink 1 to 4V DC % : Logical output operation by control input 1Connect to V or Open Connect to 0V 555

5 PRECAUTIS FOR PROR USE This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. The series can accept only non-corrosive gases. Do not use it with liquid or corrosive gas. Piping To mount a joint on the sensor pressure port, engage a spanner mm in size on the hexagonal section of the port and fix the joint securely. Do not apply a spanner on the enclosure. ( ) mm spanner Male thread Female thread The tightening torque should be 0Nm {04kgfcm} or less with the male thread (R1/4, NPT1/4) and N m {0.4kgfcm} or less with the female thread (M5, -3 UNF). Wind a sealing tape around the outer male thread not to leak the air. With G1/ thread of the -E, use a commercial gasket (for G1/). Mounting With the optional mounting bracket, the tightening torque should be 0.5Nm {5.1kgfcm} or less. Adjustment Designation and function 1Pointer 3Main scale 5Power indicator 6Operation indicator OUT / STEP. kgf/cm 1.0 Setting adjuster 4Sub scale 7Pressure indicator 1/ step indicator (Green) (*1) : The above figure represents the positive pressure type (0). The scale of the negative pressure type is reverse to it. 1 3 Designation Pointer (*1) Setting adjuster Main scale Function Rotate the adjuster, and the pointer turns around. The indicated value by the pointer represents the threshold level. Setting the threshold level pressure type The more counterclockwise, the higher vacuum level is set. pressure type The more clockwise, the higher positive level set. Pa unit scale -0, -1 : - : MPa MS--1 (Option) M3mm screws with washers Error indication When the sensor reveals the LED indications as the right figure, the excess current flows through the circuit. In such case, turn power off and check a connected load. (*1) : The right figure represents the negative pressure type. The scale of the positive type is reverse to it. Wiring Do not supply power while wiring. Verify that supply voltage ripple is within the rating. With a commercial switching regulator, ground the F.G. terminal. Where some device generating noise such as a switching regulator or an inverter motor is placed around the sensor, ground the F.G. terminal. Do not run the sensor cable along any high-voltage or power cable in parallel or in a same raceway. It may cause a malfunction by induction Sub scale Power indicator Operation indicator Pressure indicator 1/ step indicator (Green) The scale does not completely coincide with the LED bar display. Use it as an approximate index. Respective unit is; -0 : cmhg -N : psi -1, - : kgf/cm -E : bar Lights up while the power is supplied. Lights up when the output is activated. Shows the applied pressure level. This indicator reveals half a step / STEP. kgf/cm Lights off / STEP. kgf/cm Lights up (*1) : In case that the pointed position and pressure indication at the setting pointer may shift, use the setting pointer as a guide. Others Do not insert any wire or needle into the pressure port. If the diaphragm inside is damaged, the sensor can not work properly. Keep the applied pressure within the given range. The transient time duration is 50ms after power-up. 556

6 DIMENSIS (Unit : mm) Pointer - (-) Setting adjuster Pressure indicator (*1) Power indicator (*1) Operation indicator Sensor / step indicator (Green) (*1) : The figure illustrates the dimensions of -1 (positive pressure). On the negative pressure, the scale direction is reverse to the positive pressure scale. (-N) M3 female threads 6 deep 5 "3.7 cable 0.5m long European (-E) 54 -M3 female threads 6 deep M5 female thread 6 deep Pressure port R1/4 5 -M3 female threads 6 deep UNF 6.4 deep Pressure port NPT 1/4 6 deep "3.7 cable 0.5m long "3.7 cable 0.5m long Pressure port G1/ (*1) : The front figure is omitted because of the same dimensions as the type. (*1) : The front figure is omitted because of the same dimensions as the type. MS--1 -"6.4 mounting holes Sensor mounting bracket 5 Assembled dimensions Mounting drawing with "6.4 mounting holes 4-"3.4 mounting holes "5 3 5 t Material : SPCC Two M3mm screws with washers are attached

7 DIMENSIS (Unit : mm) MS-- MS--3 Assembled dimensions Mounting drawing with - Panel mounting bracket and Front protective cover (Option) The front protective cover is illustrated in 4.5 Material : Polycarbonate (Front protective cover) 6nylon Polyacetal (Panel mounting bracket) (7) area. 70 Panel cut-out dimensions (*1) : Thickness of the panel should be 1 to 3. mm

Construction diagram Semiconductor transducer Silicone oil. Stainless steel SUS316 pressure port Hastelloy C diaphragm.

Construction diagram Semiconductor transducer Silicone oil. Stainless steel SUS316 pressure port Hastelloy C diaphragm. SERIES LED Display Anti-corrosive Digital ure Sensor DP3 ure Measurement of Corrosive Gases and Liquids Possible! Marked Conforming to EMC Directive Superior Anti-corrosive Hastelloy C Diaphragm and Stainless