Table of Contents General Information Fuseholders NEW Power Blocks NEW Heavy Duty Terminal Blocks Single and Double Row Terminal Blocks

Transcription

1 Table of Contents General Information 3-4 Fuseholders General Information 5-6 Class H 250 Volt 7 Class H 600 Volt 8 Class H Fuse Panels 9-0 Class R 250 Volt Class R 600 Volt 2 Class H & R Dimensions 3-5 Class T 300 Volt 6 Class T 600 Volt 7 Class T Dimensions 8-20 Class J 600 Volt 2 M Holder 600 Volt 22 M Enclosed Holder 23 M Holder Sectional 24 CC Holder 600 Volt 25 CC Enclosed Holder 26 Class G 27 M, CC, Class J & G Dimensions Semi Conductor Fuse Holder Box 3 Semi Conductor Fuse Holder Stud 32 Fuse Holders with BD Connectors 33 Fork Lift Fuse Holder 34 Fuse Holder Covers NEW Class CC, G, and Midget Accessories 37 Power Blocks General Information 38 Power Distribution Blocks Power Blocks (Splicer) 4 Power Stud Blocks 42 Power Splicer/Stud Blocks NEW Thermoplastic Power Block 45 Power Block Covers 46 Grounding Lugs 47 Power Block Dimensions Heavy Duty Terminal Blocks General Information 5 00 Series 52 03P & 200 Series RZ Series GP Series Series Series 57 Single and Double Row Terminal Blocks General Information - Single Row 58 4 Series Series Series 6 82 Series Series Series Series General Information - Double Row 68 00/670A GP Series /67 GP Series HB Series 7 300/672 GP Series Series GP Series GP Series A GP Series GP Series GP Series GP Series GP Series GP Series 8 62 RZ Series A RZ Series RZ Series RZ Series 85

2 Table of Contents Terminal Block Accessories General Information Kliptite/Quick Connect 86 Single Row Kliptite/Quick Connect 87 Double Row Kliptite/Quick Connect 88 Solder Terminals (ST & 3/4 ST) 89 Solder Terminals (Y, YSY, Z) 90 J, RJ, RJS Jumpers, Wire Clamp, Straddle Plate 9 Fanning Strips 92 Stud & Turret Terminal Blocks 93 Top Mounted Covers 94 Sub Mounted Marking Strips 95 Top Mounted Marking Strips 96 Kulka â Marker and Insulator Strips 97 Kulka â Single Row Marker Strip Dimensions 98 Kulka â Double Row Marker Strip Dimensions 99 Marking Styles 00 Terminal Block Printing 0 Sectional Terminal Blocks General Information 02 3/8" Sectional Block /2" Sectional Block /8" DIN Sectional Block /6" Sectional Fuse Holder 0 NEW DIN Rail Terminal Blocks General Information MIK3 2 MIK5 3 MIK0 4 MIK6 5 MIK25 6 DIN Rail Disconnect - MIKTS4 7 Fuse Terminal Block - MIKSI5 8 Ground Terminal Blocks MIKE4 9 MIKE0 9 MIKE6 9 DIN Rail Adapter 20 Military and Navy Class Terminal Blocks General Information - Military Class 2 37TB B Series 22 37TB F & 38TB F Series 23 39TB F & 40 TB F Series 24 4TB F & 42TB F Series 25 LD, LS Options 26 General Information - Navy Class 27 3TB, 4TB, 5TB, 6TB Series 28 7TB, 8TB, 9TB, 0TB, TB Series 29 5TB, 6TB, 7TB, 25TB, 26TB Series 30 NEW Studded Power Feed Thru Terminal Blocks General Information - ST722 Family/Cover 3 ST722B25 Series (back mount) 32 ST722S25 Series (slide-in mount) 33 ST722E25 Series (end mount) 34 NEW Single Stud Connection Block - ST70 35 Index Terms and Conditions Warnings and Cautions 40 2

3 General Information Marathon Special Products, a REGAL-BELOIT Company, has served the electrical/electronic component industry for over 70 years. Our facility in Bowling Green, Ohio contains all manufacturing and warehousing operations including an extensive electrical test lab. We offer a broad range of fuse holders and terminal blocks, including Kulka terminal blocks. In addition, we have the expertise to design and manufacture non-standard products for specific customer applications. On February, 994 Marathon Special Products was registered to ISO 9002 quality standards. Marathon Special Products also offers a line of DIN sectional terminal blocks. Agency Approvals: The majority of products manufactured by Marathon Special Products are Underwriters Laboratories and Canadian Standards Association approved. The approval status of products can be found throughout the catalog. Below are the different approval forms and brief descriptions. UL UR CSA Listed by Underwriters Laboratories, products are quality for use in equipment without end use agency approval when applied within products rated performance. Recognized by Underwriters Laboratories suitable for use only in end use equipment where Underwriters Laboratories determine acceptability of the combination. Certified by Canadian Standards Association, suitable for use in other equipment where Canadian Standards Association determines the suitability of the combination. Compliance with European Union Low Voltage Directive. Tightening Torque: Recommended tightening torque is listed for all products, either on the carton label or the product label. All torque recommendations are based on UL 486. In some cases, because of various connector designs, our recommended torque is different from the torque tables shown in UL 486. However, these products passed the heating cycling and static heating tests as specified in UL 486. Wire Ampacity: The ampacity of a wire is its current carrying capacity with reference to the cross sectional area of the conductor(s), the temperature rating of the insulation and ambient temperature. Marathon specified wire ranges are based on UL approved tests using 75 C wire. Wires with temperature ratings other than 75 C are approved while observing NEC Article 30 wire tables for allowable ampacities of insulated conductors. Marathon voltage and amperage ratings remain constant and are independent of the temperature rating of the wire using in application. Wire gauges and type must remain within the Marathon specified ranges to be UL approved. However, UL approval for higher currents may be obtained in some end-use applications. 3

4 General Information Wire Chart: Stranded wire sizes and ampacity for 75 C copper wire. Tolerances for Catalog Dimensions: Length Dimensions Tolerance All Other Dimensions Tolerance.0Ó-5.0Ó.030 X.XÓ Ó-0.0Ó.050 X.XXÓ Ó-5.0Ó.060 X.XXXÓ.00 Note: Catalog Dimensions are for Guidance only and are not to be construed as inspection standards. This catalog is intended to present product data that will help the end user with design application. Since changes to products occur, it is recommended that the end user request samples for evaluation. Marathon Special Products reserves the right to change or update without notice. 4

5 5-37.Fuseholders /20/03 :2 AM Page 5 Fuse Holders General Information: Marathon has been manufacturing quality fuse holders for over 30 years. The key word is quality. It is incorporated into every Marathon fuse holder, right along with design. Fuseholders The product line includes a broad range of holders to accommodate the following fuses: Class H, K, R, T, J, CC, G, CD and M (miscellaneous). The majority of these fuse holders are available in 250 and 600 volts at current ratings from 30 through 600 amperes. The Class R, T, J, CD and CC fuse holders have passed 200,000 ampere high current interrupt testing in accordance with UL standard UL 52 for fuse holders. Class R and CC fuse holders have a rejection feature which prevents the insertion of a fuse with lower interrupting rating. The size of Class T and J fuse holders prevent the insertion of a fuse with lower interrupting rating. Fuse Clips: Marathon fuse holders are equipped with the patented ÒCool Clip Ó. This fuse clip is standard on all 30 through 200 amp fuse holders. The heat generated in a fuse clip can actually reduce the life of the fuse, the clip and the conductor, as well as the protection power of the fusing device. No longer is it necessary for heat build up to rob equipment of protection and extended life. MarathonÕs revolutionary ÒCool Clip Ó is the result of an extensive analytical optimization process. Heat is dissipated so well through the ÒCool Clip Ó the conductor acts as a heat sink and at the same time eliminates broken or sprung fuse clips. Reinforcing members are available for most Marathon fuse holders, for use where an extra tight connection is required. These are recommended for electric heat or where high ambients are present. To comply with Automotive Industry Standard ET-2 use the following options: Class H Holder with Reinforcing Member 30 Amp use SP Connector or Copper Box Connector 60 Amp use Copper Box Connector 5

6 5-37.Fuseholders /20/03 :2 AM Page 6 Fuse Holders Fuseholders Wire Connectors: Marathon fuse holders are available with three types of wire connectors. S Screw Connector An economical connector for use with a wire, or either a ring or spade type terminal. Screw is #0-32 steel. SQ Screw Connector w/quick Connects Same as screw connector with additional quick connect options. SP Sems Pressure Connector A positive pressure connector eliminating the need for a wire terminal. Ideal for use where there is a vibration problem. Sems pressure screw is #0-32 steel. SPQ Sems Pressure Connector w/quick Connects Same as Sems connector with additional quick connect options. B Box Connector Suitable for use with stranded or solid wire. Connector is aluminum tin plated. Copper Box Connectors are available on 30 and 60 amp fuse holders. Add CU after the catalog number. Wire Ranges: All wire ranges shown in the fuse holder section are the ranges of the wire connector that is used as a component of the fuse holder assembly. Ordering Code: Reinforcing Amp Connector Member Rating Style R F 30A 3 B CU Designates Class H # of Poles Copper Box Fuse Holder Connector F = 250 Volt Rating (Optional) 6F = 600 Volt Rating Applications: Marathon fuse holders can be used in various applications, including control panels, lighting and heating circuits, motor circuits, circuit breaker protection, switchgear equipment, appliances, electric heat, air conditioning and refrigeration equipment, elevator systems and transformer protection. 6

7 5-37.Fuseholders /20/03 :2 AM Page 7 Class H & K Fuse Holder Volt Have Been Tested & Approved for 0,000 Amp Interrupting Capacity Patented Cool Clip Design UL Listed File No. E353 CSA Cert. File No. LR2455 Fuseholders 30 & 60 Amp: Clip, Copper Alloy, Tin Plated 00 Amp: 200 Amp: 400 & 600 Amp: Catalog#: Clip, Copper Alloy, Tin Plated Clip, One Piece Aluminum, Tin Plated Clip, Copper Alloy, Tin Plated Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses F30AS RF30AS F30A2S RF30A2S 2 #0-#22 AWG CU F30A3S RF30A3S 3 F30ASP RF30ASP F30A2SP RF30A2SP 2 30 #0-#4 AWG CU 9/6Ó DIA BY 2Ó F30A3SP RF30A3SP 3 F30AB RF30AB F30A2B RF30A2B 2 Thermoplastic #6-#4 AWG CU A2Y F30A3B RF30A3B 3 CRN F60ASQ* RF60ASQ* NLN F60A2SQ* RF60A2SQ* 2 #0-#22 AWG CU NON F60A3SQ* RF60A3SQ* 3 NRN 60 3/6Ó DIA BY 3Ó F60AB RF60AB OT #2-#4 AWG CU F60A2B RF60A2B 2 OTN #2-#2 AWG AL F60A3B RF60A3B 3 RLN RF00AB RF #2/0-#4 AWG CU RF00A2B 2 00 Phenolic Ó DIA BY 5 7/8Ó #2/0-#2 AWG AL RF00A3B 3 F200ABE SAME 250 MCM- /2Ó DIA BY 200 Polyester F200A3BE 3 #6 AWG CU AL 7 /8Ó RF400AB (2) 350 MCM- 2 3/32Ó DIA BY 400 RF400A3B 3 #6 AWG CU AL 8 5/8Ó Phenolic F600AB (2) 500 MCM- 2 29/32Ó DIA BY N/A 600 F600A3B 3 #4 AWG CU AL 0 3/8Ó *UL Recognized File No. E353 Contact Factory for Stud Options 7

8 5-37.Fuseholders /20/03 :2 AM Page 8 Class H & K Fuse Holders Volt Fuseholders Have Been Tested & Approved for 0,000 Amp Interrupting Capacity Patented Cool Clip Design UL Listed File No. E353 CSA Cert. File No. LR & 60 Amp: Clip, Copper Alloy, Tin Plated 00 Amp: Clip, Copper Alloy, Tin Plated 200 Amp: Clip, One Piece Aluminum, Tin Plated 400 & 600 Amp: Clip, Copper Alloy, Tin Plated Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6F30AS R6F30AS 6F30A2S R6F30A2S 2 #0-#22 AWG CU 6F30A3S R6F30A3S 3 6F30ASP R6F30ASP 6F30A2SP R6F30A2SP 2 30 #0-#4 AWG CU 3/6Ó DIA BY 5Ó 6F30A3SP R6F30A3SP 3 6F30AB R6F30AB A6Y Phenolic 6F30A2B R6F30A2B 2 #6-#4 AWG CU CRS 6F30A3B R6F30A3B 3 NLS 6F60AB R6F60AB NOS #2-#4 AWG CU /6Ó DIA BY 6F60A2B R6F60A2B 2 60 NRS #2-#2 AWG AL 5 /2Ó 6F60A3B R6F60A3B 3 OTS R6F00AB RES #2/0-#4 AWG CU /32Ó DIA BY R6F00A2B 2 00 RFS #2/0-#2 AWG AL 7 7/8Ó R6F00A3B 3 RLS 6F200ABE SAME 250 MCM- 3/4Ó DIA BY 200 Polyester 6F200A3BE 3 #6 AWG CU AL 9 5/8Ó R6F400AB (2) 350 MCM- 2 29/32Ó DIA BY 400 R6F400A3B 3 #6 AWG CU AL 5/8Ó Phenolic 6F600AB (2) 500 MCM- 3 7/6Ó DIA BY N/A 600 6F600A3B 3 #4 AWG CU AL 3 3/8Ó Contact Factory for Stud Options 8

9 5-37.Fuseholders /20/03 :2 AM Page 9 Class H & K Fuse Panels 30 and 60 Amp 250 Volt Base, General Purpose Phenolic, 50 C Patented Cool Clip Design Clip, Copper Alloy, Tin Plated Reinforcing Member Available Bus Bars are Available with #2/0 - #4 Awg or 250 MCM - #6 Wire Ranges Consult Factory for Special Requirements UL Recognized File No. E353 CSA Certified File No. LR2455 Fuseholders Ordering Code: Reinforcing Member Class H Fuse Distribution Panels Number of Poles 2, 3, 4 or 6 R H 4 0 B 2 L Amp Rating of Poles 0 = 60 Amps All Poles = 30 Amps All Poles 2 = 30,60 Any Combination 3 = 30, 60, 60 Any Combination Load Termination S = Wire Binding Screw B = Box Connector #2-4 CU #6-4 CU P = SEMS Pressure Screw Q =.250 Male Quick Connect C = Combination of the Above (consult factory) Entry of Bus Bar (Only if Bused) F-Front L-Lateral Line Terminations Code Same As Load Termination. Omit if line Termination is Same as Load (S, B, P, Q or C). OR Busing Arrangements = Special Busing (consult factory) 2 = Poles Bused by Pairs 3 = Poles Bused by Threes 4 = Bused by Fours 9

10 5-37.Fuseholders /20/03 :2 AM Page 0 Class H & K Fuse Panels (Cont.) Fuseholders 30 and 60 Amp 250 Volt Poles Dimensions (IN) (MM) Poles Dimensions (IN) (MM) No. L No. L Dimensions (IN) (MM) Fuse Distribution Panel Options Circle/Indicate one item per pole and number of poles. The items to be indicated are within the rectangles. Bussing is only available on line side. If bussing, indicate lug size 2/0 or 250mcm (F = Front entry L = Lateral entry) Consult factory for other modifications. 0

11 5-37.Fuseholders /20/03 :2 AM Page Class R Fuse Holders Volt Have Been Tested & Approved for 200,000 Amp Interrupting Capacity Patented Cool Clip Design UL Listed File No. E353 CSA Certified File No. LR2455 Fuseholders 30 & 60 Amp: Clip, Copper Alloy, Tin Plated, with Patented Reject Member 00 Amp: Clip, Copper Alloy, Tin Plated 200 Amp: Clip, One Piece Aluminum, Tin Plated, with Reject Pin 400 & 600 Amp: Clip, Copper Alloy, Tin Plated, with Reject Pin Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses R30AS R30A2S 2 #0-#22 AWG CU R30A3S 3 R30ASP R30A2SP 2 30 Thermoplastic #0-#4 AWG CU 9/6Ó DIA BY 2Ó R30A3SP 3 R30AB A2D-R R30A2B 2 #6-#4 AWG CU A2K-R R30A3B 3 DLN-R R60AS* FLNR R60A2S* SAME 2 #0-#22 AWG CU FRN-R R60A3S* 3 KLNR 60 Thermoplastic 3/6Ó DIA BY 3Ó R60AB KTS-R #2-#4 AWG CU R60A2B 2 LLNRK #2-#2 AWG AL R60A3B 3 LPN-RK R00AB TLN #2/0-#4 AWG CU R00A2B 2 00 Phenolic Ó DIA BY 5 7/8Ó TR-R #2/0-#2 AWG AL R00A3B 3 R200ABE 250 MCM- /2Ó DIA BY 200 Polyester R200A3BE 3 #6 AWG CU AL 7 /8Ó R400AB (2) 350 MCM- 2 3/32Ó DIA BY 400 R400A3B 3 #6 AWG CU AL 8 5/8Ó Phenolic R600AB (2) 500 MCM- 2 29/32Ó DIA BY N/A 600 R600A3B 3 #4 AWG CU AL 0 3/8Ó *UL Recognized File No. E353 Contact Factory for Stud Options

12 5-37.Fuseholders /20/03 :2 AM Page 2 Class R Fuse Holders Volt Fuseholders Have Been Tested & Approved for 200,000 Amp Interrupting Capacity Patented Cool Clip Design UL Listed File No. E353 CSA Certified File No. LR & 60 Amp: Clip, Copper Alloy, Tin Plated, with Patented Reject Member 00 Amp: Clip, Copper Alloy, Tin Plated 200 Amp: Clip, One Piece Aluminum, Tin Plated, with Reject Pin 400 & 600 Amp: Clip, Copper Alloy, Tin Plated, with Reject Pin Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6R30AS 6R30A2S 2 #0-#22 AWG CU 6R30A3S 3 6R30ASP 6R30A2SP 2 30 Phenolic #0-#4 AWG CU 3/6Ó DIA BY 5Ó A6D-R 6R30A3SP 3 A6K-R 6R30AB DLS-R 6R30A2B 2 #6-#4 AWG CU FLSR 6R30A3B 3 FLSR_ID 6R60AB SAME /6Ó FRS-R #2-#4 AWG CU 6R60A2B 2 60 DIA BY IDSR #2-#2 AWG AL 6R60A3B 3 5 /2Ó KLSR Phenolic 6R00AB KTS-R #2/0-#4 AWG CU /32Ó DIA BY 6R00A2B 2 00 LLSRK #2/0-#2 AWG AL 7 7/8Ó 6R00A3B 3 LLSRK_ID 6R200ABE 250 MCM- 3/4Ó DIA BY LPS-RK 200 Polyester 6R200A3BE 3 #6 AWG CU AL 9 5/8Ó TRS-R 6R400AB (2) 350 MCM- 2 29/32Ó DIA BY 400 6R400A3B 3 #6 AWG CU AL 5/8Ó Phenolic 6R600AB (2) 500 MCM- 3 7/6Ó DIA BY N/A 600 6R600A3B 3 #4 AWG CU AL 3 3/8Ó Contact Factory for Stud Options 2

13 5-37.Fuseholders /20/03 :2 AM Page 3 Class H and R Fuse Holder Dimensions Figure A B C D E F G H I J K L F30A POLE RF30A 2 POLE SEE FIGURE # R30A 3 POLE F60A POLE.48 RF60A 2 POLE FIG N/A N/A.28 DIA THRU. R60A 3 POLE DIA X. 63 CÕBORE RF00A POLE.93 R00A 2 POLE FIG N/A N/A.28 DIA THRU.36 3 POLE DIA X.59 CÕBORE F200A POLE DIA THRU.26 FIG N/A N/A R200A 3 POLE DIA X.38 CÕBORE RF400A POLE DIA THRU FIG N/A N/A 5/6 HEX R400A 3 POLE DIA X.44 CÕBORE.9 F600A POLE DIA THRU FIG N/A N/A 3/8 HEX R600A 3 POLE DIA X.44 CÕBORE.9 6F30A POLE N/A DIA THRU R6F30A 2 POLE FIG N/A N/A.50 DIA X.44 CÕBORE 6R30A 3 POLE 4.25 N/A N/A.25 6F60A POLE.95 N/A.28 DIA THRU R6F60A 2 POLE FIG N/A N/A.50 DIA X.50 CÕBORE 6R60A 3 POLE POLE 2. N/A R6F00A 6R00A 2 POLE FIG N/A N/A.28 DIA THRU.59 DIA X.64 CÕBORE 3 POLE F200A POLE DIA THRU FIG N/A N/A 6R200A 3 POLE DIA X.44 CÕBORE.26 R6F400A POLE DIA THRU FIG N/A N/A 5/6 HEX 6R400A 3 POLE DIA X.44 CÕBORE.9 6F600A POLE DIA THRU FIG N/A N/A 3/8 HEX 6R600A 3 POLE DIA X.44 CÕBORE.9 MM = Dim X 25.4 Fuseholders Pole 2 Pole 3 Pole Figure : 3

14 5-37.Fuseholders /20/03 :2 AM Page 4 Class H and R Fuse Holder Dimensions Fuseholders Pole 2 Pole 3 Pole Figure 2: Pole 2 Pole 3 Pole Figure 3: 4

15 5-37.Fuseholders /20/03 :2 AM Page 5 Class H and R Fuse Holder Dimensions Fuseholders Pole 3 Pole Figure 4: Pole 3 Pole Figure 5: 5

16 5-37.Fuseholders /20/03 :2 AM Page 6 Class T Fuse Holders Volt Fuseholders Have Been Tested & Approved for 200,000 Amp Interrupting Capacity Patented Cool Clip Design UL Listed File No. E353 CSA Certified File No. LR & 60 Amp: Clip, Copper Alloy, Tin Plated, with Patented Reject Member 00 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt /4Ó-20 X /2Ó, /4Ó Belleville Washer 200 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt, 5/6Ó-8 X 3/4Ó Hex Head, 5/6Ó Belleville Washer 400 & 600 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt, 3/8Ó-6 X 3/4Ó Hex Head Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses T30A2B RT30A2B 2 3/32Ó DIA BY 30 T30A3B RT30A3B 3 #2-#4 AWG CU 7/8Ó T60A2B RT60A2B 2 #2-#2 AWG AL 9/6Ó DIA BY 60 T60A3B RT60A3B 3 7/8Ó T00AB #2/0-#4 AWG CU 3/6Ó DIA BY A3T 00 T00A3B 3 #2/0-#2 AWG AL 2 5/32Ó JJN Phenolic T200AB 250 MCM /6Ó DIA BY JLLN 200 T200A3B 3 #6 AWG CU AL 2 7/6Ó N/A (2) 250 MCM- /32Ó DIA BY T400AB 400 #6 AWG CU AL 2 3/4Ó (2) 500 MCM- 39/64Ó DIA BY T600AB 600 #6 AWG CU AL 3 /6Ó 6

17 5-37.Fuseholders /20/03 :2 AM Page 7 Class T Fuse Holders Volt Have Been Tested & Approved for 200,000 Amp Interrupting Capacity Patented Cool Clip Design UL Listed File No. E353 CSA Certified File No. LR2455 Fuseholders 30 & 60 Amp: Clip, Copper Alloy, Tin Plated, with Patented Reject Member 00 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt /4Ó-20 X /2Ó Bolt /4Ó Belleville Washer 200 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt 5/6Ó-8 X 3/4Ó Hex Head 5/6Ó Belleville Washer 400 & 600 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt 3/8Ó-6 X 3/4Ó Hex Head 3/8Ó Belleville Washer Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6T30A2S R6T30A2S 2 6T30A3S R6T30A3S 3 #0-#22 AWG CU 6T30A2SP R6T30A2SP 2 9/6Ó DIA BY 30 #0-#4 AWG CU 6T30A3SP R6T30A3SP 3 /2Ó 6T30A2B R6T30A2B 2 6T30A3B R6T30A3B 3 #2-#4 AWG CU R6T60A2B 2 #2-#2 AWG AL 3/6Ó DIA BY A6T SAME 60 R6T60A3B 3 9/6Ó JJS Phenolic 6T00AB #2/0-#4 AWG CU 3/6Ó DIA BY JLLS 00 6T00A3B 3 #2/0-#2 AWG AL 2 6/64Ó 6T200AB 250 MCM- /6Ó DIA BY 200 6T200A3B 3 #6 AWG CU AL 3 /4Ó N/A (2) 250 MCM- 39/64Ó DIA BY 6T400AB 400 #6 AWG CU AL 3 5/8Ó (2) 500 MCM- 2 5/64Ó DIA BY 6T600AB 600 #6 AWG CU AL 3 63/64Ó 7

18 5-37.Fuseholders /20/03 :2 AM Page 8 Class T Dimensions Figure A B C D E F G H I J Fuseholders T30A 2 POLE RT30A 3 POLE FIG.2 SEE FIGURE # T60A 2 POLE RT60A 3 POLE FIG.28 SEE FIGURE # T00A POLE.37 N/A 0.20 THRU 3/6 FIG POLE X.44 CÕBORE HEX 0.9 T200A POLE FIG N/A 0.28 THRU 5/ X.44 CÕBORE HEX 0.9 T400A POLE FIG N/A 0.28 THRU 0.50 X.44 CÕBORE N/A 0.9 T600A POLE FIG THRU 0.50 X.44 CÕBORE N/A 0.9 6T30A 2 POLE R6T30A 3 POLE FIG 5.28 SEE FIGURE #5 6T60A 2 POLE R6T60A 3 POLE FIG 5.74 SEE FIGURE #5 6T00A POLE.37 N/A 0.20 THRU 3/6 FIG POLE X.44 CÕBORE HEX 0.9 6T200A POLE.50 N/A 0.28 THRU 5/6 FIG POLE X.44 CÕBORE HEX 0.9 6T400A POLE FIG N/A 0.28 THRU 0.50 X.44 CÕBORE N/A 0.9 6T600A POLE FIG THRU 0.50 X.44 CÕBORE N/A 0.9 MM = Dim X

19 5-37.Fuseholders /20/03 :2 AM Page 9 Class T Dimensions Fuseholders 2 Pole 3 Pole Figure : Pole 3 Pole Figure 2: 9

20 5-37.Fuseholders /20/03 :2 AM Page 20 Class T Dimensions Fuseholders Figure 3: Figure 4: 2 Pole 3 Pole Figure 5: 20

21 5-37.Fuseholders /20/03 :22 AM Page 2 Class J Fuse Holders Volt Have Been Tested & Approved for 200,000 Amp Interrupting Capacity Patented Cool Clip Design UL Listed File No. E353 CSA Certified File No. LR2455 Fuseholders 30 & 60 Amp: Clip, Copper Alloy, Tin Plated 30 Amp: 00 Amp: 200 Amp: Amp: Catalog#: Integral DIN Rail Mount Expander Block Clip, Copper Alloy, Tin Plated Clip, One Piece Aluminum, Tin Plated Clip, Copper Alloy, Tin Plated Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6J30AS R6J30AS 6J30A2S R6J30A2S 2 6J30A3S R6J30A3S 3 #0-#22 AWG CU 6J30AES R6J30AES Expander 6J30ASP R6J30ASP 6J30A2SP R6J30A2SP 2 30 #0-#4 AWG CU 3/6Ó DIA BY 2 /4Ó 6J30A3SP R6J30A3SP 3 Thermoplastic 6J30AESP R6J30AESP Expander 6J30AB R6J30AB A4J 6J30A2B R6J30A2B 2 AJT #6-#4 AWG CU 6J30A3B R6J30A3B 3 JKS 6J30AEB R6J30AEB Expander JLS 6J60AB R6J60AB JTD 6J60A2B R6J60A2B 2 60 #2-#4 AWG CU AL /6Ó DIA BY 2 3/8Ó JTD_ID 6J60A3B R6J60A3B 3 LPJ 6J00AB #2/0-#4 AWG CU 00 6J00A3B 3 #2/0-#2 AWG AL /8Ó DIA BY 4 5/8Ó 6J200AB 250 MCM- 200 /2Ó DIA BY 5 3/4Ó 6J200A3B 3 #6 AWG CU AL SAME Phenolic 6J400AB (2) 350 MCM Ó DIA BY 3 3/8Ó 6J400A3B 3 #6 AWG CU AL 6J600AB (2) 500 MCM J600A3B 3 #4 AWG CU AL 2 /2Ó DIA BY 3 3/4Ó Contact Factory for Stud Options 2

22 5-37.Fuseholders /20/03 :22 AM Page 22 M Fuse Holders Volt Fuseholders Have Been Tested & Approved for 00,000 Amp Interrupting Capacity Clip, Copper Alloy, Tin Plated Quick Connect Standard with Screw (S) or Sems Pressure (SP) UL Recognized File No. E353 CSA Certified File No. LR2455 Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6M30ASQ A3X-2, A25Z-2, 6M30A2SQ 2 #0-#22 AWG CU A60Q-2, A6Y-2B, 6M30A3SQ 3 AGU, ATM, 6M30ASPQ ATQ, BAF, 6M30A2SPQ 2 #0-#4 AWG CU BAN, BLF, 3/32Ó DIA BY 6M30A3SPQ 3 BLN, BLS, N/A 30 Thermoplastic /2Ó 6M30AB FLA, FLM, 6M30A2B 2 FLQ, FNM, 6M30A3B 3 FNQ, GFN, #6-#4 AWG AL 6M30ABCU GGO, KLK, 6M30A2BCU 2 KLKD, KLQ, 6M30A3BCU 3 KTK, OTM, TRM 22

23 5-37.Fuseholders /20/03 :22 AM Page 23 Midget Enclosed Fuse Holders Volt Has Been Tested & Approved for 00,000 Amp Interrupting Capacity Touchsafe Design IEC Type IP2 DIN Rail Mount (35mm) Blown Fuse Indication Available Handle Allows Quick Easy Fuse Change Ventilated Design for Cooler Operation UL Recognized File No. E353 IEC Type IP2 Protection CSA Certified File No. LR2455 Fuseholders Catalog# Indicating Poles Amp Base Material Wire Range Fuse Size Fuses 6SM30A A3X-2, A25Z-2, A60Q-2, 6SM30A2 2 A6Y-2B, AGN, ATM, No 6SM30A3 3 ATQ, BAF, BAN, 6SM30A4 4 BLF, BLN, BLS, 30 Thermoplastic #6 - #4 AWG CU 3/32Ó DIA BY /2Ó 6SM30Al FLA, FLM, FLQ, 6SM30A2l 2 FNM, FNQ, GFN, Yes 6SM30A3l 3 GGO, KLK, KLKD, 6SM30A4l 4 KLQ, KTK, OTM, TRM Dimensions mm Inches A B C D E F G H

24 5-37.Fuseholders /20/03 :22 AM Page 24 Midget Fuse Holder Volt Fuseholders 30 Amp Sectional Version 600 Volts Have Been Tested & Approved for 00,000 Amp Interrupting Capacity Base, White Nylon, 05 C Connector, Box Type, Accepts up to #0 Awg Wire, either Terminated or Non-Terminated Clip, Copper Alloy, Tin Plated UL Recognized File No. E353 CSA Certified File No. LR2455 Catalog# Description Std. Pack Wire Range Fuse Size Fuses 6W30AF Flat Mount A3X-2, A25Z-2, A60Q-2, 6W30AC Channel Mount 0 A6Y-2B, AGN, ATM, 6WE-F End Piece-Flat ATQ, BAF, BAN, 6WE-C End Piece-Channel #0-#4 Awg 3/32Ó DIA BY BLF, BLN, BLS, MC Channel Clamp 25 CU Stranded /2Ó LONG FLA, FLM, FLQ, MPC-6 6 Foot Channel FNM, FNQ, GFN, MPC-3 3 Foot Channel - GGO, KLK, KLKD, /8Ó Diameter X 2Ó GR-2 KLQ, KTK, OTM, TRM Long Nylon Rod Flat Mount L = (0.68 X N) C = (0.68 X N) N = No. of Poles Channel Dimensions LCH = L

25 5-37.Fuseholders /20/03 :22 AM Page 25 CC Fuse Holders Volt 30 Amp: Have Been Tested & Approved for 200,000 Amp Interrupting Capacity Clip, Copper Alloy, Tin Plated with Patented Reject Member Quick Connect Standard with Screw (S) or Sems Pressure (SP) UL Listed File No. E353 CSA Certified File No. LR Amp: Have Been Tested & Approved for 200,000 Amp Interrupting Capacity Patented Cool Clip Design Clip, Copper Alloy, Tin Plated with Patented Reject Member Integral DIN Rail Mount Expander Block Available UL Listed File No. E353, Class CD CSA Certified File No. LR Fuseholders Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6CC30ASQ 6CC30A2SQ 2 #0-#22 AWG CU 6CC30A3SQ 3 6CC30ASPQ ATDR 6CC30A2SPQ 2 #0-#4 AWG CU ATMR 6CC30A3SPQ 3 3/32Ó DIA BY ATQR N/A 30 6CC30AB /2Ó CCMR 6CC30A2B 2 Thermoplastic FRQ-R 6CC30A3B 3 KLDR #6-#4 AWG CU 6CC30ABCU KLKR 6CC30A2BCU 2 KTK-R 6CC30A3BCU 3 LP-CC R6CC60AB SAME R6CC60A2B SAME 2 #2-#4 AWG CU 0.70Ó DIA BY 60 R6CC60A3B SAME 3 #2-#2 AWG AL.85Ó R6CC60AEB EXPANDER 25

26 5-37.Fuseholders /20/03 :22 AM Page 26 Class CC Enclosed Fuse Holders Volt Fuseholders Has Been Tested & Approved for 200,000 Amp Interrupting Capacity Touchsafe Design IEC Type IP2 DIN Rail Mount (35mm) Blown Fuse Indication Available Handle Allows Quick Easy Fuse Change Ventilated Design for Cooler Operation UL Listed File No. E353 IEC Type IP2 Protection Certified File No. LR2455 Base Wire Fuse Catalog # Indicating Poles Amp Materials Range Size Fuses 6SC30A ATDR 6SC30A2 2 ATMR NO 6SC30A3 3 ATQR 6SC30A4 4 3/32Ó DIA BY CCMR 30 Thermoplastic #6-#4 AWG CU 6SC30Al /2Ó FRQ-R 6SC30A2l 2 KLDR YES 6SC30A3l 3 KLKR 6SC30A4l 4 KTK-R, LP-CC Dimensions mm inches A B C D E F G H

27 5-37.Fuseholders /20/03 :22 AM Page 27 Class G Fuse Holders Have Been Tested & Approved for 00,000 Amp Interrupting Capacity Clip, Copper Alloy, Tin Plated with Patented Reject Member Quick Connect Standard with Screw (S) or Sems Pressure (SP) UL Listed File No. E353 CSA Certified File No. LR2455 /2-5 Amps (600 Volt) Catalog #: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses G5ASQ RG5ASQ G5A2SQ RG5A2SQ 2 #0-#22 AWG CU G5A3SQ RG5A3SQ 3 G5ASPQ RG5ASPQ G5A2SPQ RG5A2SPQ 2 #0-#4 AWG CU G5A3SPQ RG5A3SPQ 3 3/32Ó DIA BY 5 Thermoplastic G5AB RG5AB 5/6Ó G5A2B RG5A2B 2 G5A3B RG5A3B 3 G5ABCU RG5ABCU #6-#4 AWG CU G5A2BCU RG5A2BCU 2 G5A3BCU RG5A3BCU 3 20 Amps (600 Volt) Catalog #: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses G20ASQ RG20ASQ G20A2SQ RG20A2SQ 2 #0-#22 AWG CU G20A3SQ RG20A3SQ 3 G20ASPQ RG20ASPQ G20A2SPQ RG20A2SPQ 2 #0-#4 AWG CU G20A3SPQ RG20A3SPQ 3 3/32Ó DIA BY 20 Thermoplastic G20AB RG20AB 3/32Ó G20A2B RG20A2B 2 G20A3B RG20A3B 3 G20ABCU RG20ABCU #6-4 AWG CU G20A2BCU RG20A2BCU 2 G20A3BCU RG20A3BCU Amps (480 Volt) Catalog #: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses G30ASQ RG30ASQ G30A2SQ RG30A2SQ 2 #0-#22 AWG CU G30A3SQ RG30A3SQ 3 G30ASPQ RG30ASPQ G30A2SPQ RG30A2SPQ 2 #0-#4 AWG CU G30A3SPQ RG30A3SPQ 3 3/32Ó DIA BY 30 Thermoplastic G30AB RG30AB 5/8Ó G30A2B RG30A2B 2 G30A3B RG30A3B 3 G30ABCU RG30ABCU #6-#4 AWG CU G30A2BCU RG30A2BCU 2 G30A3BCU RG30A3BCU 3 27 AG SC SLC AG SC SLC AG SLC SC Fuseholders

28 5-37.Fuseholders /20/03 :22 AM Page 28 Class J, G, M, CC Fuse Holder Dimensions Fuseholders Figure A B C D E F G H I J K L M EXPANDER POLE.6 6J30A.22 X.79 R6J30A 2 POLE FIG SLOT 3 POLE 3.25 N/A N/A N/A N/A 0.24 YES 6J60A POLE R6J60A 2 POLE 3 POLE SEE FIGURE #3 R6J00A POLE FIG THRU N/A N/A N/A N/A 3 POLE FIG 2A CÕBORE N/A N/A N/A 6J200A POLE N/A N/A N/A N/A 0.34 THRU FIG N/A 3 POLE 8.00 N/A N/A N/A X.40 CÕBORE 0.23 NO 6M30A POLE X.59 6CC30A 2 POLE FIG SLOT G30A 3 POLE 2.35 N/A N/A N/A N/A 0.09 NO POLE..8 X.74 R6CC60A 2 POLE FIG SLOT 3 POLE 3.2 N/A N/A N/A N/A 0.09 YES 6J400A POLE THRU FIG N/A N/A N/A 3 POLE X.44 CÕBORE.9 Ñ NO 6J600A POLE THRU FIG N/A N/A N/A 3 POLE X.9 CÕBORE.9 Ñ NO MM = Dim X 25.4 EXPANDER Pole 2 Pole 3 Pole Figure : 28

29 5-37.Fuseholders /20/03 :22 AM Page 29 Class J, G, M, CC Fuse Holder Dimensions 3/6 HEX SOCKET I J L K F B E Fuseholders H A D G K A D F E B F E B M C C C-05 Pole 3 Pole Figure 2: Figure 2A: Pole 2 Pole 3 Pole Figure 3: 29

30 5-37.Fuseholders /20/03 :22 AM Page 30 Class J, G, M, CC Fuse Holder Dimensions Fuseholders Pole 3 Pole Figure 4: Pole 3 Pole Figure 5: 30

31 5-37.Fuseholders /20/03 :22 AM Page 3 Semi Conductor Fuse Holder Box Version - Insulator Base, General Purpose Phenolic, 50 C Hex-Head Bolts and Belleville Washers Provided Unassembled Connector-Aluminum, Tin Plated MS0 has dove-tail interlocking feature Two-piece modular design UL 600V Fuseholders Catalog#: Maximum Amperage: Wire Range: MS0 00 #2/0 - #4 MS (2) 250 MCM - #6 MS (2) 250 MCM - #6 MS (2) 500 MCM - #6 Note: Order two blocks per fuse. Request Semi-Conductor Fuse Holders Brochure for more information. MS0 MS03 MS02 MS04 3

32 5-37.Fuseholders /20/03 :22 AM Page 32 Semi Conductor Fuse Holder -,000 Volt Fuseholders Stud Version - Base, General Purpose Phenolic, 50 C Stud, Steel Zinc Plated Nuts and Washers Provided Unassembled UL Recognized File No. E353 Catalog#: Maximum Amperage: Fuse Size: ST Ó DIA ST Ó DIA ST4 ST38 Note: Order two blocks per fuse. 32

33 5-37.Fuseholders /20/03 :22 AM Page 33 Fuse Holders with BD (Box Distribution) Connectors 30 and 60 Amp 250 and 600 Volt Fuseholders Available on Class H, R, and J Holders Connectors, High Conductive Aluminum, Tin Plated Reinforcing Member Available, Standard on Class R UL Recognized File No. E353 CSA Certified File No. LR2455 Class H Fuse Holders (For Class R Replace F With R in Catalog Number) Catalog #: Volts Amp Line Wire Range Load Wire Range F60AXBD F60AXBD-D () #2-#0 AWG () #2-#0 AWG () #6-#4 AWG 6F30AXBD-D 30 () #6-#4 AWG 6F60AXBD () #2-#0 AWG 6F60AXBD-D () #6-#4 AWG (2) #0-#8 AWG () #2-#0 AWG () #6-#4 AWG () #2-#0 AWG (2) #6-#4 AWG Class J Fuse Holders Catalog #: Volts Amp Line Wire Range Load Wire Range 6J60AXBD 6J60AXBD-D () #2-#0 AWG () #2-#0 AWG () #6-#4 AWG () #2-#0 AWG (2) #6-#4 AWG X - Denotes Number of Poles * - Class R and J - No Agency 33

34 5-37.Fuseholders /20/03 :22 AM Page 34 STSF Forklift/Semi Conductor Fuse Holder Fuseholders Base, High Strength Thermoplastic Temperature Rating of 70 C Studs, Stainless Steel (Nuts and Washers Provided) 30V AC/DC, to 400 Amps UL Recognized File No. E353 Applications: This holder is found in direct current (DC) Applications: forklifts, golf carts, custom high-end car stereo systems, heavy equipment, marine aircraft, etc. STSF: A #0 flat or conventional pan head screw head is acceptable. 34

35 5-37.Fuseholders /20/03 :22 AM Page 35 Fuse Holder Covers Material, Thermoplastic Thermal Rating, 25 C (RT, per UL 746) Flammability, VO (per UL 94) UL Listed Accessories Under File No. E8825 In Application, Protection is Consistent With IEC Standard 529, Designation IP2 (finger safe)* Opening Allows View of Self-Indicating Fuses Holes for Test Probes and Re-tightening of Wire Terminations Covers Fit Most Fuse Holder Brands Fuseholders Catalog#: For Use W/Fuse Holder#: Fuse Type: Voltage: Amp: CHR230 F30A/R30A H/R CHR260 F60A/R60A H/R CHR200 RF00A/R00A H/R CHR630 6F30A/6R30A H/R CHR660 6F60A/6R60A H/R CHR600 R6F00A/6R00A H/R CJ630 6J30A J CJ660 6J60A J CC630 6CC30 CC CC660 6CC60 CD CCM630** 6M30A/6CCM30A MISC * Applications involving fuse holders other than Marathon may not provide IP2 finger protection. ** Covers are recognized if used with recognized fuses. 35

36 5-37.Fuseholders /20/03 :22 AM Page 36 Fuse Holder Covers Fuseholders Catalog Name Figure A B C D E F CHR230 Fig CHR260 Fig CHR200 Fig CHR630 Fig CHR660 Fig CHR600 Fig CJ630 Fig CJ660 Fig CC630 Fig CC660 Fig CCM630 Fig MM = Dim X 25.4 Figure : Figure 3: Figure 2: 36

37 5-37.Fuseholders /20/03 :22 AM Page 37 Class CC, G and Midget Fuse Holder Accessories Fuseholders DIN Rail Adapter (Catalog# DIN R-2) This adapter is for use with the Class CC (30A), Midget and Class G fuse holders. The DIN R-2 snaps securely to the Marathon fuse holders and to DIN rails without tools. This permits the holders to mount directly to standard and low profile 35mm symmetrical and 32mm asymmetrical DIN rails. They may be removed from rails by lifting the disconnect tab. Cover/Puller (Catalog# CVR-MCC) MarathonÕs Cover/Puller was designed for use with the Class CC (30A), Midget and Class G (5 & 20 amp only) fuse holders. Once installed, the Cover/Puller provides an easy and safe way to remove fuses. In application, protection is consistent with IEC Standard 529, designation IP2 (finger safe). 37

38 38-50.power blocks /20/03 :24 AM Page 38 Power Terminal Blocks General Information: Power Terminal Blocks are available in seven molding sizes. They are identified by the first three digits of the catalog number. The 40, 42, 43, 44 and 45 series are manufactured with general purpose phenolic rated at 50 C. The 4 and 32 series are manufactured of high impact thermoplastic rated at 25 C. All Power Terminal Blocks are UL recognized file number E62806 and CSA certified file number LR9766, unless noted. Power Blocks Connector Wire Hole Size: Conductor Opening Diameter of Opening # Ó # Ó # Ó #2/ Ó #250MCM Ó #35MCM Ó #400MCM Ó #500MCM Ó Wire hole openings are designed to accept stranded conductors with the number of strands specified in UL 486. Consult factory for other diameters. Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Ratings based on UL 059 may be higher in some cases depending on application. Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Applications: Designed for use with heating, air conditioning and refrigeration, elevator systems, material handling equipment, control panels, motor control, switchgear, and any area where power needs to be distributed to more than one load. 38

39 38-50.power blocks /20/03 :24 AM Page 39 Power Distribution Blocks 600 Volts Connector, High Conductive Aluminum, Tin Plated Amp Rating Based on NEC Table 30-6 Using 75 C Copper Wire *Wire Connector Rated 90 C UL Recognized File No. E62806 CSA Certified File No. LR9766 ** Openings rated for #4-4 AWG are multiple wire rated: (2) #0 CU Str, (2 to 4) #2 CU Str, and (2 to 4) #4 CU Str. Catalog # Poles Amps Connector Configuration * * * * Line Wire Range #2-#4AWG #2-#4AWG 2/0-#4AWG 2/0-#4AWG 2/0-#4AWG 350MCM-#6AWG 400MCM-#6AWG 400MCM-#6AWG 400MCM-#6AWG 400MCM-#6AWG 2/0-#4AWG 500MCM-#4AWG Openings per pole 2 Connector Configuration Load Wire Range #0-#8AWG #0-#8AWG ** #4-#4AWG ** #4-#4AWG ** #4-#4AWG ** #4-#4AWG #2-#4AWG #2-#4AWG #2-#4AWG #2-#4AWG ** #4-#4AWG #2-#4AWG Openings per pole Power Blocks 39

40 38-50.power blocks /20/03 :25 AM Page 40 Power Blocks 600 Volts Catalog # Poles Power Distribution Blocks (Cont.) Amps Connector Configuration Connector, High Conductive Aluminum, Tin Plated Amp Rating Based on NEC Table 30-6 Using 75 C, Copper Wire CU-Connector, High Conductive Copper, Tin Plated (Meets Copper Only Automotive Standard) UL Recognized File No. E62806 CSA Certified File No. LR9766 ** Openings rated for #4-4 AWG are multiple wire rated: (2) #0 CU Str, (2 to 4) #2 CU Str, and (2 to 4) #4 CU Str. Line Wire Range 500MCM-#4AWG 500MCM-#4AWG 500MCM-#4AWG 500MCM-#4AWG 500MCM-#4AWG Openings per pole 2 Connector Configuration Load Wire Range 2/0-#4AWG 350MCM-#6AWG #2-4AWG #2-#4AWG #2-#4AWG ** #4-#4AWG Openings per pole MCM-#4AWG 350MCM-#4AWG 2/0-#4AWG MCM-#4AWG 2 2/0-#4AWG MCM-#2AWG 2 3/0-#6AWG ** #4-#4AWG CU CU 2/0-#4AWG 500MCM-#4AWG 2/0-#4AWG 500MCM-#4AWG 500MCM-#4AWG CU CU CU CU CU ** #4-#4AWG #2-#4AWG ** #4-#4AWG #2-#4AWG 2/0-#4AWG MCM-#6AWG 6 2/0-#4AWG 8 40

41 38-50.power blocks /20/03 :25 AM Page 4 Power Blocks (Splicer) 600 Volts Connector, High Conductive Aluminum, Tin Plated CU-Connector, High Conductive Copper, Tin Plated (Meets Copper Only Automotive Standard) Amp Rating Based on NEC Table 30-6 Using 75 C Copper Wire *Wire Connector Rated 90 C UL Recognized File No. E62806 CSA Certified File No. LR9766 Connector Line Openings Connector Load Openings Catalog# Poles Amps Configuration Wire Range Per Pole Configuration Wire Range Per Pole * #2-#4AWG #2-#4AWG * #2-#4AWG #2-#4AWG * 2/0-#4AWG 2/0-#4AWG MCM-#6AWG 250MCM-#6AWG MCM-#6AWG 250MCM-#6AWG MCM-#6AWG 350MCM-#6AWG MCM-#6AWG 350MCM-#6AWG MCM-#4AWG 600MCM-#4AWG MCM-#4AWG 2 350MCM-#4AWG MCM-#4AWG 2 500MCM-#4AWG CU CU /0-#4AWG * 2/0-#4AWG MCM-#6AWG 250MCM-#6AWG Power Blocks 4

42 38-50.power blocks /20/03 :25 AM Page 42 Power Stud Blocks 600 Volts Connector, High Conductive Copper, Tin Plated Stud, Brass, Tin Plated Amp Rating Based on NEC Table 30-6 Using 75 C Copper Wire UL Recognized File No. E62806 CSA Certified File No. LR9766 Power Blocks Connector Line Openings Connector Load Openings Catalog# Poles Amps Configuration Wire Range Per Pole Configuration Wire Range Per Pole /4-20 Screw /4-20 Screw /4-20 X 9/6 Stud /4-20 X 9/6 Stud /8-6 X 3/6 Stud 3/8-6 X 3/6 Stud /8-6 X 3/6 Stud /4-20 X 3/6 Stud /8-6 X 7/6 Stud /4-20 X 9/6 Stud /8-6 X 7/6 Stud 3/8-6 X 7/6 Stud /2-3 X 7/6 Stud /2-3 X 7/6 Stud /8-6 X 7/6 Stud 3/8-6 X 7/6 Stud /8-6 X 7/6 Stud /4-20 X 7/6 Stud /8-6 X Stud 3/8-6 X Stud

43 38-50.power blocks /20/03 :25 AM Page 43 Power/Splicer Stud Blocks 600 Volts Connector, High Conductive Aluminum, Tin Plated Stud, Brass, Tin Plated Quick Connect, Brass, Tin Plated 0-32 Screw, Brass, Nickel Plated Amp Rating Based on NEC Table 30-6 Using 75 C Copper Wire *Wire Connector Rated 90 C UL Recognized File No. E62806 CSA Certified File No. LR9766 Connector Line Openings Connector Load Openings Catalog# Poles Amps Configuration Wire Range Per Pole Configuration Wire Range Per Pole #2-#4AWG 0-32 Screw #2-#4AWG 0-32 Tapped Hole #2-#4AWG.25X.032 Qk Cnct #2-#4AWG 0-32 X.60 Stud #2-#4AWG #0-32 Hole & (2) QC #2-#4AWG #2-#4AWG & () QC MCM-#6AWG 3/8-6 X /8 Stud * 2/0-#4AWG M6 Hole * 2/0-#4AWG /4-20 Tapped Hole Power Blocks 43

44 38-50.power blocks /20/03 :25 AM Page Volts Power Splicer/Stud Blocks (Cont.) Connector, High Conductive Aluminum, Tin Plated Stud, Brass, Tin Plated Quick Connect, Brass, Tin Plated 0-32 Screw, Brass, Nickel Plated Amp Rating Based on NEC Table 30-6 Using 75 C, Copper Wire *Wire Connector Rated 90 C UL Recognized File No. E62806 CSA Certified File No. LR9766 Power Blocks Connector Line Openings Connector Load Openings Catalog# Poles Amps Configuration Wire Range Per Pole Configuration Wire Range Per Pole * 2/0-#4AWG /4-20 X /2 Stud * /0-#4AWG /4-20 X /2 Stud MCM-#4AWG /4-20 X 7/32 Stud MCM-#4AWG 3/8-6 X 2/32 Stud MCM-500MCM 3/8-6 X 9/32 Stud MCM-#4AWG 2 3/8-6 X 5/8 Stud MCM-#4AWG 2 /2-3 X /6 Stud

45 38-50.power blocks /20/03 :26 AM Page 45 New Thermoplastic Power Block General Amp Rating Based on NEC Table 30-6 Using 75 C Copper Wire Wire Connector Rated 90 C CSA Certified File No. LR9766 UL Recognized File No. E62806 Power Distribution Block and Power Block-Splicer Connector, High Conductive Aluminum, Tin Plated CU-Connector, High Conductive Copper, Tin Plated Power Distribution Blocks 600 Volts Connector Line Openings Connector Load Openings Catalog# Poles Amps Configuration Wire Range Per Pole Configuration Wire Range Per Pole Adder #2/0-#4AWG #4-#4AWG Adder Multiple Wire Rated: CU CU 2 #0 CU Str to 4 #2 CU Str to 4 #4 CU Str Adder Power Blocks/Splicer Connector Line Openings Connector Load Openings Catalog# Poles Amps Configuration Wire Range Per Pole Configuration Wire Range Per Pole Adder 75 #2/0-#4AWG CU CU #2/0-#4AWG Adder Power Blocks Power Stud Block and Power Splicer/Stud Block Connector, High Conductive Aluminum, Tin Plated (*Connector, High Conductive Copper, Tin Plated) Stud, Brass, Tin Plated Metric Studs-Steel, Zinc Plated Power Stud Blocks* Connector Line Openings Connector Load Openings Catalog# Poles Amps Configuration Wire Range Per Pole Configuration Wire Range Per Pole /4-20 X 9/6 Stud /4-20 X 9/6 Stud Adder M6 X 5 Stud M6 X 5 Stud Adder Power Splicer/Stud Blocks Connector Line Openings Connector Load Openings Catalog# Poles Amps Configuration Wire Range Per Pole Configuration Wire Range Per Pole /4-20 X /2 Stud Adder #2/0-#4AWG M6 Stud X 3 Stud Adder 45

46 38-50.power blocks /20/03 :26 AM Page 46 Power Block Covers Material.06 Clear Protective Plastic Two Thread Cutting Screws Furnished Per Cover Covers Are Slotted For Easy Installation Covers Are Available For The 40, 4, 42, 43, 44, Series Power Blocks: Hinged, Thermoplastic, 25 C Dimensions (IN): Power Blocks Catalog # A B Figure # CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CH32 CH CH323 A Figure B Figure 2 Figure 3 46

47 38-50.power blocks /20/03 :26 AM Page 47 Grounding Lugs Connector, High Conductive Aluminum, Tin Plated Per Code Ð Screw Is Green UL Recognized File No. E43665 CSA Certified File No Catalog # (Connector Wire Range) Power Blocks GL02 (#2-#4 AWG) GL20 (#2/0-#4 AWG) GL35 (350MCM-#6 AWG) 47

48 38-50.power blocks /20/03 :26 AM Page Series Power Terminal Blocks Dimensions Power Blocks 40 Series Adder POLE 2 POLE 3 POLE 4 Series 2 POLE 3 POLE 2.67 [67.7] 2.47 [62.7].20 [5.] THRU 2.07 [52.5] 2.29 [58.].93 [49.].27 [32.3].38 [9.7].9 [48.4] TYP. AT BOSS [.2] [3.2].8 [4.5] ALL POCKETS.83 [2.0] REF..46 [37.2] REF. 2.0 [53.3] REF [38.7] [8.].70 [7.7].9 [4.9].47 [.9] 2.74 [69.5] REF..55 [4.] POLE 2 POLE 3 POLE 4 POLE 48

49 38-50.power blocks /20/03 :26 AM Page 49 Power Terminal Blocks Dimensions 42 Series POLE 2 POLE 3 POLE Power Blocks 43 Series POLE 2 POLE 3 POLE 49

50 38-50.power blocks /20/03 :26 AM Page 50 Power Terminal Blocks Dimensions 44 Series Power Blocks POLE 2 POLE 3 POLE 45 Series POLE 2 POLE 3 POLE 50

51 Heavy Duty Terminal Blocks General Information: Heavy Duty Terminal Blocks are available in two styles Ð Deadfront Type (00, 200, 985 and 0987 series) and Barrier Type (500 and 600 series). Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Ratings based on UL 059 may be higher in some cases depending on application. Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Applications: Designed for electrical termination of wire with or without the use of a wire terminal. These rugged terminal blocks are widely used in such industries as traffic control, utilities, switchgear and other utility related equipment. Heavy Duty Terminal Blocks 5

52 Heavy Duty Terminal Blocks 00 Series - Deadfront Type 600 Volts Base, General Purpose Phenolic, 50 C Connector, Aluminum Tin Plated Spring, Copper, Use XXS Screws, Brass, Tin Plated Wire Range #6-#8 Awg CU Ð 65 Amps Wire Range With Spring #6-#4 Awg CU Ð 65 Amps UL Recognized File No. #E62806 CSA Certified File No. LR Wire Range Reduced #8-#8 Awg CU Heavy Duty Terminal Blocks Catalog# Catalog# # of Poles A B 02 02S S S S S S S=Copper Pressure Spring MM = Dim X

53 Heavy Duty Terminal Blocks 03P and 200 Series - Deadfront Type 600 Volts Base, General Purpose Phenolic, 50 C Connector, Aluminum, Tin Plated Screws, Steel, Tin Plated 03 P Wire Range #4-#4 Awg CU Ð 70 Amps 200 Wire Range #4-#8 Awg CU Ð 70 Amps UL Recognized File No. #E62806 CSA Certified File No. LR Wire Range Reduced 03 P #6-#8 Awg CU 200 #6-#4 Awg CU Catalog# # of Poles A B MM = Dim X 25.4 Heavy Duty Terminal Blocks 03 P Series 200 Series 53

54 Heavy Duty Terminal Blocks 0987 RZ Series - Deadfront Type 600 Volts Heavy Duty Terminal Blocks Base, Thermoplastic, 05 C Connector, Copper Alloy, Nickel Plated (TC Tubular Clamp) Printed Circuit Contact, Copper Alloy Electro Tin Plated (PC) Wire Range #8-#24 Awg Ð 50 Amps Contact Factory For Multiple Wire Combinations.475 Centerline Spacing UL Recognized File No. #E478 CSA Certified File No. LR Wire Range Reduced #0-#24 Awg Dimensions Catalog # # of poles A B 0987 RZ TC N/A 0987 RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC For PC version substitute PC for TC in catalog number DIN Adaptor is available for 0987 Series 54

55 Heavy Duty Terminal Blocks 985 GP Series - Deadfront Type 600 Volts Base, General Purpose Phenolic, 50 C Connector, Aluminum, Tin Plated Screws, Steel, Nickel Plated Wire Range #4-#8 Awg Copper Wire Ð 85 Amps Multiple Wire Combinations For Solid Or Stranded Copper Wire Are: #8 Awg to #4 Awg 2 to 6 #4 Awg 2 #8 Awg 2 to 6 #6 Awg 2 to 4 #0 Awg 2 to 8 #8 Awg 2 to 4 #2 Awg.625 Center-Line Spacing UL Recognized File No. E478 CSA Certified File No. LR Wire Range Reduced #6-#8 Awg Dimensions Catalog # # of poles A B 985 GP N/A 985 GP GP GP GP GP GP GP GP GP GP MM = Dim X 25.4 Heavy Duty Terminal Blocks 55

56 Heavy Duty Terminal Blocks 500 Series 600 Volts Base, General Purpose Phenolic, 50 C Connector, Brass, Nickel Plated Screws, Brass, Nickel Plated, 0-32 Wire Range #0-#6 Awg Copper Wire Ð 30 Amps With Proper Termination Approved For 75 Amps 5/8Ó Line To Line Spacing UL Recognized File No. #E62806 CSA Certified File No. LR9766 Heavy Duty Terminal Blocks 500 STD 500 DJ 500 DJSV 500 ST* 500 SC 500 H Standard Removable Removable 0-32 Stud Short Circuiting Standard Connector Connector Connector With Connector With Removable Bar With Brass With Hinge Cover Brass Insert Brass Insert Connector Insert 4 Shorting Removable Cover Pins Per Block * STRC: 0-32 Stud with Riveted Connector MCJ-Jumper Available Catalog #: # of Poles Catalog #: # of Poles 504 STD ST STD ST STD ST 8 52 STD 2 52 ST DJ SC DJ SC DJ SC 8 52 DJ 2 52 SC DJSV H DJSV H DJSV H 8 52 DJSV 2 52 H 2 Catalog #: # of Poles A B MM = Dim X

57 Heavy Duty Terminal Blocks 600 Series 600 Volts Base, General Purpose Phenolic, 50 C Connector, Brass, Nickel Plated Screws, Brass, Nickel Plated, 0-32 Wire Range #0-#6 Awg Copper Wire Ð 30 Amps With Proper Termination Approved For 75 Amps 2/32Ó Line To Line Spacing UL Recognized File No. #E62806 CSA Certified File No. LR STD 600 DJ 600 DJSV 600 ST* 600 SC 600 H Standard Removable Removable 0-32 Stud Short Circuiting Standard Connector Connector Connector With Connector With Removable Bar With Brass With Hinge Cover Brass Insert Brass Insert Connector Insert 4 Shorting Removable Cover Pins Per Block * STRC: 0-32 Stud with Riveted Connector MCJ-Jumper Available Catalog #: # of Poles Catalog #: # of Poles 604 STD ST STD ST STD ST 8 62 STD 2 62 ST DJ SC DJ SC DJ SC 8 62 DJ 2 62 SC DJSV H DJSV H DJSV H 8 62 DJSV 2 62 H 2 Heavy Duty Terminal Blocks Catalog #: # of Poles A B MM = Dim X

58 Single Row Terminal Blocks General Information: Single Row Terminal Blocks are available in four basic line to line molding sizes. Some are available in either open or feed thru/printed circuit designs. The basic material is phenolic. Modifications are also provided on most terminal blocks, including marking strips. Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 059. Ratings based on UL 059 may be higher in some cases depending on application. Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Reference Chart: Single/Double Row Terminal Blocks Catalog Base Max Wire Screw Inches # of Series Page Amps Volts Material Size for Screw Size L to L Lines Features *300 Phenolic # Open Back Phenolic # Open Back Phenolic # Open Back Phenolic # Open Back Phenolic # Feed Thru Phenolic # Printed Circuit Phenolic #4 6-32/ Printed Circuit All voltage ratings based on Class C requirements unless noted. Open back terminal blocks require an insulator strip to achieve voltage rating. *Based on Class B requirements. 58

59 Single Row Terminal Blocks Kulka 4 Series 300 Volts* MM=Dim X 25.4 *Based on Class B Requirements Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-30F) Material Available Screws, #2-56 Binder Head, Phil-Slot Terminals, Plated Brass -23 Poles /4Ó Centers Wire Range With Wire Binding Screw #8-#20 Awg Ð 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Catalog Number Dimensions Description of Poles A B 4 GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP Hardware Options: (Hardware options may affect ratings - consult factory) KT0 = Full Quick Connect (0 Flat) See Page 87 KT = Full Quick Connect (45 Bend) See Page 87 KT2 = Full Quick Connect (90 Bend) See Page 87 ST = Full Solder See Page 89 J 40 = Line to Line Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 6 = Half Quick Connect (0 Flat) See Page 87 KT 7 = Half Quick Connect (45 Bend) See Page 87 KT 8 = Half Quick Connect (90 Bend) See Page 87 Z = Lug Over the Side (.32) 92 = Printed Circuit Pin (.25) (Over the Side) 904 = Feed Thru Solder See Page Single/Double Row Terminal Blocks

60 Single Row Terminal Blocks Kulka 599 Series 50 Volts Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-30F) Material Available Screws, #5-40 Binder Head, Phil-Slot Terminals, Plated Brass -30 Poles 3/8Ó Centers Wire Range With Wire Binding Screw #6-#22 Awg Ð 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Single/Double Row Terminal Blocks Number Dimensions Catalog of Description Poles A B 599 GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP MM=Dim X 25.4 Hardware Options: (Hardware options may affect ratings - consult factory) KT 28 = Full Quick Connect (0 Flat) See Page 87 KT 29 = Full Quick Connect (45 Bend) See Page 87 KT 30 = Full Quick Connect (90 Bend) See Page 87 J 600 = Line to Line Jumper See Page RJ(S) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 34 = Half Quick Connect (0 Flat) See Page 87 KT 35 = Half Quick Connect (45 Bend) See Page 87 KT 36 = Half Quick Connect (90 Bend) See Page 87 Z = Lug Over the Side (.32) See Page = Stud See Page = Feed Thru Solder See Page = Solder Pin See Page = Solder Pin See Page 93 60

61 Single Row Terminal Blocks Kulka 699 Series 50 Volts Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-30F) Material Available Screws, #6-32 Binder Head, Phil-Slot Terminals, Plated Brass -23 Poles 7/6Ó Centers Wire Range With Wire Binding Screw #4-#6 Awg Ð 20 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Number Dimensions Catalog of Description Poles A B 699 GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP MM=Dim X 25.4 Hardware Options: (Hardware options may affect ratings - consult factory) KT 46 = Full Quick Connect (0 Flat) See Page 87 KT 47 = Full Quick Connect (45 Bend) See Page 87 KT 48 = Full Quick Connect (90 Bend) See Page 87 J 60 = Line to Line Jumper See Page 9 60 RJ(S)= Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 52 = Half Quick Connect (0 Flat) See Page 87 KT 53 = Half Quick Connect (45 Bend) See Page 87 KT 54 = Half Quick Connect (90 Bend) See Page 87 Z = Lug Over the Side (.437) See Page = Stud See Page = Feed Thru Solder See Page = Solder Pin See Page = Solder Pin See Page 93 6 Single/Double Row Terminal Blocks

62 Single Row Terminal Blocks Kulka 82 Series 600 Volts Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-30F) Material Available Screws, #8-32 Binder Head, Phil-Slot Terminals, Plated Brass -8 Poles 9/6Ó Centers Wire Range With Wire Binding Screw #2-#4 Awg Ð 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Single/Double Row Terminal Blocks Number Dimensions Catalog of Description Poles A B 82 GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP MM=Dim X 25.4 Hardware Options: (Hardware options may affect ratings - consult factory) KT 73 = Full Quick Connect (0 Flat) See Page 87 KT 74 = Full Quick Connect (45 Bend) See Page 87 KT 75 = Full Quick Connect (90 Bend) See Page 87 J 602 = Line to Line Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 79 = Half Quick Connect (0 Flat) See Page 87 KT 80 = Half Quick Connect (45 Bend) See Page 87 KT 8 = Half Quick Connect (90 Bend) See Page 87 Z = Lug Over the Side (.64) See Page = Stud See Page = Feed Thru Solder See Page 93 62

63 Single Row Terminal Blocks Kulka 690 Series 300 Volts Base, Phenolic, 50 C Screws, #6-32 Binder Head, Slotted 7/6Ó Centers Terminals, Plated Brass Wire Range #4 Max. Ð 20 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR GP / 692 GP / 693 GP 69 GP / 692 GP / 693 GP Number Dimensions of Terminals A B MM=Dim X 25.4 Number Dimensions of Terminals A B Solder terminal K=.52 [3.0] W=.06 [.59] Kliptite terminal Solder terminal K=.58 [4.68] W=.3 [3.8] 694 GP / 695 GP / 696 GP 694 GP / 695 GP / 696 GP Number Dimensions of Terminals A B MM=Dim X 25.4 Number Dimensions of Terminals A B Solder terminal K=.52 [3.0] W=.06 [.59] Kliptite terminal Solder terminal K=.58 [4.68] W=.3 [3.8] Single/Double Row Terminal Blocks

64 Single Row Terminal Blocks Kulka 690 Series 300 Volts 697 GP / 698 GP / 699 GP Number Dimensions of Terminals A B MM=Dim X 25.4 Single/Double Row Terminal Blocks Hardware Options: (Hardware options may affect ratings - consult factory) KT 46 = Full Quick Connect (0 Flat) See Page 87 KT 47 = Full Quick Connect (45 Bend) See Page 87 KT 48 = Full Quick Connect (90 Bend) See Page 87 J 60 = Line to Line Jumper See Page 9 60 RJ(S) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 52 = Half Quick Connect (0 Flat).250 See Page 87 KT 53 = Half Quick Connect (45 Bend).250 See Page 87 KT 54 = Half Quick Connect (90 Bend).250 See Page Solder Terminal 697 GP K=.52 W=.06 [3.0] [.59] 698 GP Kliptite Terminal 699 GP Solder Terminal K=.58 W=.3 [4.68] [3.8]

65 Single Row Terminal Blocks Kulka 2590 Series 50 Volts Base, Phenolic, 50 C Screws, #6-32 Binder Head, Slotted 3/8Ó Centers Terminals, Plated Brass Wire Range #6 Max. Ð 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR A GP / 2593A GP Number Dimensions of Terminals A B MM=Dim X A GP / 2599A GP Number Dimensions of Terminals A B MM=Dim X A GP / 2593A GP Number Dimensions of Terminals A B A GP / 2599A GP Number Dimensions of Terminals A B Hardware Options: (Hardware options may affect ratings - consult factory) KT 28 = Full Quick Connect (0 Flat) See Page 87 KT 34 = Half Quick Connect (0 Flat) See Page 87 KT 29 = Full Quick Connect (45 Bend) See Page 87 KT 35 = Half Quick Connect (45 Bend) See Page 87 KT 30 = Full Quick Connect (90 Bend) See Page 87 KT 36 = Half Quick Connect (90 Bend) See Page 87 J 600 = Line to Line Jumper See Page 9 Z = Lug Over the Side (.72) 600 RJ(S) = Multiple Position Jumper See Page 9 Y = Lug Over the Side (.359) 3/4 ST = Half Solder See Page A PC = Printed Circuit (.20 X.093) 3000 = Wire Wrap Lug (.64) 2599A PC = Printed Circuit (.20 X.093) 259A PC = Printed Circuit (.20 X.062) 2597A PC = Printed Circuit (.20 X.062) 65 Single/Double Row Terminal Blocks

66 Single Row Terminal Blocks Kulka 2690 Series 300 Volts 2697 GP / 2698 GP / 2699 GP 2697A GP / 2698A GP / 2699A GP Number Dimensions of Terminals A B MM=Dim X 25.4 Definition Barrier Ends: 2697 GP = #6-32 Screw, Printed Circuit Width = A GP = #8-32 Screw, Printed Circuit Width = GP = #6-32 Screw, Solder Turret (not shown) 2698A GP = #8-32 Screw, Solder Turret (not shown) 2699 GP = #6-32 Screw, Printed Circuit Width = A GP = #8-32 Screw, Printed Circuit Width =.093 Hardware Options: (Hardware options may affect ratings - consult factory) Single/Double Row Terminal Blocks KT 28 = Full Quick Connect (0 Flat).87 See Page 87 KT 29 = Full Quick Connect (45 Bend).87 See Page 87 KT 30 = Full Quick Connect (90 Bend).87 See Page 87 KT 34 = Half Quick Connect (O Flat).87 See Page 87 KT 35 = Half Quick Connect (45 Bend).87 See Page 87 KT 36 = Half Quick Connect (90 Bend).87 See Page 87 KT 46 = Full Quick Connect (0 Flat).250 See Page 87 KT 47 = Full Quick Connect (45 Bend).250 See Page 87 KT 48 = Full Quick Connect (90 Bend).250 See Page 87 KT 52 = Half Quick Connect (0 Flat).250 See Page 87 KT 53 = Half Quick Connect (45 Bend).250 See Page 87 KT 54 = Half Quick Connect (90 Bend).250 See Page 87 J 60 = Line to Line Jumper See Page 9 60 RJ(S) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 Z = Lug Over the Side (.344) Y = Lug Over the Side (.609) 66

67 Single Row Terminal Blocks Kulka 2690 Series 300 Volts Base, General Purpose Phenolic, 50 C Screws, #6-32 Binder Head, Slotted Or 8-32 Binder Head, Slotted 7/6Ó Centers Terminals, Plated Brass Wire Range #4-#6 AWG Ð 20 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR GP / 2695 GP / 2696 GP 2694A GP / 2695A GP / 2696A GP Number of Terminals Dimensions A B MM = Dim X 25.4 Definition Mount Ends: 2694 GP = #6-32 Screw, Printed Circuit Width = A GP = #8-32 Screw, Printed Circuit Width = GP = #6-32 Screw, Solder Turret (not shown) 2695A GP = #8-32 Screw, Solder Turret (not shown) 2696 GP = #6-32 Screw, Printed Circuit Width = A GP = #8-32 Screw, Printed Circuit Width = Single/Double Row Terminal Blocks

68 Double Row Terminal Blocks General Information: Double Row Terminal Blocks are available in four basic line to line molding sizes. Some are available in either open or closed back designs. The basic material is phenolic, however thermoplastic is also available on certain sizes. Modifications are also provided on most terminal blocks, including marking strips. Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, and service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Ratings based on UL 059 may be higher in some cases depending on application. Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Reference Chart: Single/Double Row Terminal Blocks Catalog Base Max Wire Screw Inches # of Series Page Amps Volts Material Size for Screw Size L to L Lines Features 00/670A Phenolic # Closed Back 200/ Phenolic # Closed Back 200 HB Phenolic # High Barrier/ Closed Back 300/ Phenolic # Closed Back Phenolic # Closed Back *300 Phenolic # Open Back Phenolic # Open Back 600A Phenolic # Open Back Phenolic # Open Back Phenolic # Open Back Phenolic # Open Back Phenolic # Open Back Phenolic #2 / Open Back 62 RZ Thermoplastic # High Barrier/ Closed Back 670A RZ *300 Thermoplastic # Closed Back 67 RZ *300 Thermoplastic # Closed Back 672 RZ Thermoplastic # Closed Back All voltage ratings based on Class C requirements unless noted. Open back terminal blocks require an insulator strip to achieve voltage rating. *Based on Class B requirements. 68

69 Double Row Terminal Blocks 00 Series Kulka 670A GP Series 50 Volts Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #6-32 Binder Head, Phil-Slot Terminals, Plated Brass -36 Poles 3/8Ó Centers Wire Range With Wire Binding Screw #2-#22 AWG Ð 20 Amps Wire Range With Sems Pressure Screw #8-#22 AWG Stranded Copper Wire Only, 50 Volts 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E62806 CSA Certified File No. LR9766 MSP Kulka Dimensions Catalog # Catalog # # of poles A B MSP Kulka Dimensions Catalog # Catalog # # of poles A B 0 670A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A RZ A GP A RZ A GP A RZ A GP Top Mounted Hardware is.87ó Wide MM=Dim X 25.4 Hardware Options: (Hardware options may affect ratings - consult factory) MSP KULKA (F) KT 9 = Full Quick Connect (0 flat) See Page 88 (F2) KT 20 = Full Quick Connect (45 Bend) See Page 88 (F3) KT 2 = Full Quick Connect (90 Bend) See Page 88 (S) ST = Full Solder See Page 89 (LL00) J 600 = Line to Line Jumper See Page 9 (S) 600RJ = Multiple Position Jumper See Page 9 (HS) 3/4 ST = Half Solder See Page 89 (HF) KT 25 = Half Quick Connect (0 Flat) See Page 88 (HF2) KT 26 = Half Quick Connect (45 Bend) See Page 88 (HF3) KT 27 = Half Quick Connect (90 Bend) See Page 88 (SP) 3865 = Sems Pressure Saddle Screw See Page 9 (L) Y = Feed Thru Solder (.32) LWW = Feed Thru Wire Wrap (.593) YSY = Feed Thru Solder (.500) 69 Single/Double Row Terminal Blocks

70 200 Series Kulka 67 GP Series 300 Volts Double Row Terminal Blocks Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #6-32 Binder Head, Phil-Slot Terminals, Plated Brass -30 Poles 7/6Ó Centers Wire Range With Wire Binding Screw #2-#22 AWG Ð 20 Amps Wire Range With Sems Pressure Screw #2-#22 AWG Stranded Copper Wire Only, 20 Amps Will Accommodate Lugs For Wire Sizes #0-#6 AWG Ð 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E62806 CSA Certified File No. LR9766 Single/Double Row Terminal Blocks MSP Kulka Dimensions MSP Kulka Dimensions Catalog # Catalog # # of poles A B Catalog # Catalog # # of poles A B GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP MM=Dim X 25.4 Hardware Options: (Hardware options may affect ratings - consult factory) MSP KULKA (F) KT 37 = Full Quick Connect (0 flat) See Page 88 (F2) KT 38 = Full Quick Connect (45 Bend) See Page 88 (F3) KT 39 = Full Quick Connect (90 Bend) See Page 88 (S) ST = Full Solder See Page 89 (LL 200) J60 = Line to Line Jumper (S) 60 RJ = Multiple Position Jumper See Page 9 (HS) 3/4 ST = Half Solder See Page 89 (HF) KT 43 = Half Quick Connect (0 Flat) See Page 88 (HF2) KT 44 = Half Quick Connect (45 Bend) See Page 88 (HF3) KT 45 = Half Quick Connect (90 Bend) See Page 88 (SP) 3765 = Sems Pressure Saddle Screw See Page 9 (SPSE) 3767 = Sems Pressure Saddle Screw with External Tooth Lock Washer LWW = Feed Thru Wire Wrap (.640) (L) Y = Feed Thru Solder (.437) YSY = Feed Thru Solder (.625) GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP

71 Double Row Terminal Blocks 200 HB Series (High Barrier) 600 Volts Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #6-32 Binder Head, Phil-Slot Terminals, Plated Brass -30 Poles 7/6Ó Centers Wire Range With Wire Binding Screw #2-#22 AWG Ð 20 Amps Wire Range With Sems Pressure Screw #2-#22 AWG Stranded Copper Wire Only, 20 Amps Will Accommodate Lugs For Wire Sizes #0-#6 AWG Ð 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E62806 CSA Certified File No. LR9766 Catalog # # of poles A B 20HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB MM = Dim x 25.4 Top Mounted Hardware is.250ó Wide Dimensions Dimensions Catalog # # of poles A B 26HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB Hardware Options: (Hardware options may affect ratings - consult factory) (F) = Full Quick Connect (0 flat) See Page 88 (F2) = Full Quick Connect (45 Bend) See Page 88 (F3) = Full Quick Connect (90 Bend) See Page 88 (S) = Full Solder See Page 89 LL 200HB = Line to Line Jumper 60 RJ(S) = Multiple Position Jumper See Page 9 (HS) = Half Solder See Page 89 (HF) = Half Quick Connect (0 Flat) See Page 88 (HF2) = Half Quick Connect (45 Bend) See Page 88 (HF3) = Half Quick Connect (90 Bend) See Page 88 (SP) = Sems Pressure Saddle Screw See Page 9 (SPSE) = Sems Pressure Saddle Screw with External Tooth Lock Washer LWW = Feed Thru Wire Wrap (.640) Y(L) = Feed Thru Solder (.625) YSY = Feed Thru Solder (.437) 7 Single/Double Row Terminal Blocks

72 Double Row Terminal Blocks 300 Series Kulka 672 GP Series 600 Volts Base, General Purpose Phenolic, 50¼ C Closed Back Design Screws, #8-32 Binder Head, Phil-Slot Terminals, Plated Brass -24 Poles 9/6Ó Centers Wire Range with Wire Binding Screw # 0 - #4 Awg - 30 Amps Wire Range with Sems Pressure Screw #0 - #22 Awg Stranded Copper Wire Only, 30 Amps Will Accommodate Lugs for Wire Sizes #0 - #6 Awg - 30 Amps The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. E62806 CSA Certified File No. LR9766 MSP Kulka Dimensions Catalog # Catalog # # of poles A B GP GP GP GP GP GP GP GP GP GP GP GP MSP Kulka Dimensions Catalog # Catalog # # of poles A B GP GP GP GP GP GP GP GP GP GP GP GP Top Mounted Hardware is.250ó Wide MM = Dim x 25.4 Single/Double Row Terminal Blocks Hardware Options: (Hardware options may affect ratings - consult factory) MSP KULKA (F) KT 55 = Full Quick Connect (0 Flat) See Page 88 (F2) KT 56 = Full Quick Connect (45 Bend) See Page 88 (F3) KT 57 = Full Quick Connect (90 Bend) See Page 88 (S) ST = Full Solder See Page 89 (LL 300) J602 = Line to Line Jumper See Page 9 (HS) 3/4 ST = Half Solder See Page 89 (HF) KT 6 = Half Quick Connect (0 Flat) See Page 88 (HF2) KT 62 = Half Quick Connect (45 Bend) See Page 88 (HF3) KT 63 = Half Quick Connect (90 Bend) See Page 88 (SP) 3786 = Sems Pressure Saddle Screw See Page 9 (SPSE) = Sems Pressure Saddle Screw with External Tooth Lock Washer LWW = Feed Thru Wire Wrap (.00) (L) Y = Feed Thru Solder (.437) YSY = Feed Thru Solder (.625) 72

73 Double Row Terminal Blocks 400 Series 600 Volts Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #0-32 Binder Head, Phil-Slot Terminals, Plated Brass -2 Poles /6Ó Centers Wire Range With Wire Binding Screw #0-#22 AWG Ð 30 Amps Wire Range With Sems Pressure Screw #0-#22 AWG Stranded Copper Wire Only, 30 Amps Will Accommodate Lugs For Wire Sizes #6-#6 AWG Ð 65 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E62806 CSA Certified File No. LR9766 Dimensions Hardware Options: (Hardware options may affect ratings - consult factory) SPSE = Sems Pressure Saddle Screw J603(LL 400) = Line to Line Jumper Catalog # # of poles A B Single/Double Row Terminal Blocks

74 Double Row Terminal Blocks Kulka 40 GP Series 300 Volts* Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-30F) Material Available Screws, #2-56 X 7/32 Binder Head, Phil-Slot Terminals, Plated Brass -23 Poles /4Ó Centers Wire Range With Wire Binding Screw #8-#20 AWG Ð 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 40 GP GP GP GP GP GP GP GP GP GP GP GP Dimensions Catalog # # of poles A B 40 GP GP GP GP GP GP GP GP GP GP GP * Voltage Based on Class B Requirements MM = Dim X 25.4 Hardware Options: (Hardware options may affect ratings - consult factory) J 40 = Line To LIne Jumper See Page 9 Y = Feed Thru Solder (.32) 92 = Printed Circuit Pin (.09) Single/Double Row Terminal Blocks 74

75 Double Row Terminal Blocks Kulka 600 GP Series 300 Volts Base, Phenolic, 50 C 3/8Ó Centers JJ (GDI-30F) Material Available Wire Range With Wire Binding Screw Open Back Design (Insulator Strip Required for #2-#22 AWG Ð 5 Amps Voltage Rating) UL Recognized File No. E478 Screws, #5-40 Binder Head, Phil-Slot CSA Certified File No. LR9766 Terminals, Plated Brass -22 Poles The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Dimensions Catalog # # of poles A B 600 GP GP GP GP GP GP GP GP GP GP GP Top Mounted Hardware is.87ó Wide MM = Dim X 25.4 Dimensions Catalog # # of poles A B 600 GP GP GP GP GP GP GP GP GP GP GP Hardware Options: (Hardware options may affect ratings - consult factory) KT 9 = Full Quick Connect (0 flat) See Page 88 KT 20 = Full Quick Connect (45 Bend) See Page 88 KT 2 = Full Quick Connect (90 Bend) See Page 88 ST = Full Solder See Page 89 J 600 = Line to Line Jumper See Page RJ(s) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 25 = Half Quick Connect (0 Flat) See Page 88 KT 26 = Half Quick Connect (45 Bend) See Page 88 KT 27 = Half Quick Connect (90 Bend) See Page 88 Y = Feed Thru Solder (.32) See Page 90 YSY = Feed Thru Solder (.500) See Page 90 Z = Lug Over the Side (.625) See Page = Feed Thru Solder See Page Single/Double Row Terminal Blocks

76 Double Row Terminal Blocks Kulka 600A GP Series 300 Volts Base, Phenolic, 50 C 3/8Ó Centers JJ (GDI-30F) Material Available Wire Range With Wire Binding Screw Open Back Design (Insulator Strip Required for #2-#22 AWG Ð 5 Amps for Voltage Rating) UL Recognized File No. E478 Screws, #6-32 Binder Head, Phil-Slot CSA Certified File No. LR9766 Terminals, Plated Brass -22 Poles The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Dimensions Catalog # # of poles A B 600A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP Top Mounted Hardware is.87ó Wide MM = Dim X 25.4 Dimensions Catalog # # of poles A B 600A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP Hardware Options: (Hardware options may affect ratings - consult factory) Single/Double Row Terminal Blocks KT 9 = Full Quick Connect (0 flat) See Page 88 KT 20 = Full Quick Connect (45 Bend) See Page 88 KT 2 = Full Quick Connect (90 Bend) See Page 88 ST = Full Solder See Page 89 J 600 = Line to Line Jumper See Page RJ(s) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 25 = Half Quick Connect (0 Flat) See Page 88 KT 26 = Half Quick Connect (45 Bend) See Page 88 KT 27 = Half Quick Connect (90 Bend) See Page = Wire Clamp Screw See Page 9 Y = Feed Thru Solder (.32) YSY = Feed Thru Solder (.500) Z = Lug Over the Side (.625) 2002 = Stud See Page 93 76

77 Double Row Terminal Blocks Kulka 60 GP Series 300 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #6-32 Binder Head, Phil-Slot Terminals, Plated Brass -23 Poles 7/6Ó Centers Wire Range With Wire Binding Screw #2-#22 AWG Ð 20 Amps Will Accommodate Lugs For Wire Sizes #0-#6 AWG Ð 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 60 GP GP GP GP GP GP GP GP GP GP GP GP Top Mounted Hardware is.250ó Wide MM = Dim X 25.4 Dimensions Catalog # # of poles A B 60 GP GP GP GP GP GP GP GP GP GP GP Hardware Options: (Hardware options may affect ratings - consult factory) KT 37 = Full Quick Connect (0 flat) See Page 88 KT 38 = Full Quick Connect (45 Bend) See Page 88 KT 39 = Full Quick Connect (90 Bend) See Page 88 ST = Full Solder See Page 89 J 60 = Line to Line Jumper See Page 9 60 RJ(s) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 43 = Half Quick Connect (0 Flat) See Page 88 KT 44 = Half Quick Connect (45 Bend) See Page 88 KT 45 = Half Quick Connect (90 Bend) See Page = Wire Clamp Screw See Page 9 Y = Feed Thru Solder (.422) See Page 90 YSY = Feed Thru Solder (.687) See Page = Stud See Page = Feed Thru Solder See Page = Individual Screw Terminals See Page Single/Double Row Terminal Blocks

78 Double Row Terminal Blocks Kulka 602 GP Series 300 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #8-32 Binder Head, Phil-Slot Terminals, Plated Brass -26 Poles 9/6Ó Centers Wire Range With Wire Binding Screw #2-#4 AWG Ð 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 602 GP GP GP GP GP GP GP GP GP GP GP GP GP Top Mounted Hardware is.250ó Wide MM = Dim X 25.4 Dimensions Catalog # # of poles A B 602 GP GP GP GP GP GP GP GP GP GP GP GP GP Hardware Options: (Hardware options may affect ratings - consult factory) Single/Double Row Terminal Blocks KT 55 = Full Quick Connect (0 flat) See Page 88 KT 56 = Full Quick Connect (45 Bend) See Page 88 KT 57 = Full Quick Connect (90 Bend) See Page 88 ST = Full Solder See Page 89 J602 = Line to Line Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 6 = Half Quick Connect (0 Flat) See Page 88 KT 62 = Half Quick Connect (45 Bend) See Page 88 KT 63 = Half Quick Connect (90 Bend) See Page = Wire Clamp Screw See Page 9 Y = Feed Thru Solder (.500) See Page 90 YSY = Feed Thru Solder (.672) See Page 90 Z = Lug Over the Side (.609) See Page = Stud See Page 93 78

79 Double Row Terminal Blocks Kulka 603 GP Series 600 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #0-32 Binder Head, Phil-Slot Terminals, Plated Brass -2 Poles /6Ó Centers Wire Range With Wire Binding Screw #0-#2 AWG Ð 50 Amps Will Accommodate Lugs For Wire Sizes #6-#6 AWG Ð 65 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Dimensions Hardware Options: (Hardware options may affect ratings - consult factory) J 603 = Line to Line Jumper See Page 9 Y = Feed Thru Solder (.60) See Page = Stud See Page 93 Catalog # # of poles A B 603 GP GP GP GP GP GP GP GP GP GP GP GP MM = Dim X [5.5] A B.69 [7.4].20 [ 5.2] THRU C'BORE.25 [6.4] X.09 [2.3] DP..75 [9.].44 [.].48 [2.] #0-32 X.38[9.5] BD HD SCREW.63 [5.9] [27.0].8 [46.0] Single/Double Row Terminal Blocks

80 Double Row Terminal Blocks Kulka 604 GP Series 600 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #2-32 Binder Head, Phil-Slot Terminals, Plated Brass -8 Poles 4/6Ó Centers Wire Range With Wire Binding Screw #4-#2 AWG Ð 70 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Catalog # # of poles A B 604 GP GP GP GP GP GP GP GP MM = Dim X 25.4 Dimensions Hardware Options: (Hardware options may affect ratings - consult factory) 2402 = Stud 0-32 Brass (.43 H) Nuts Included See Page 93 J604 = Line to Line Jumper See Page 9 Single/Double Row Terminal Blocks 80

81 Double Row Terminal Blocks Kulka 605 GP Series 600 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #/4-28 Binder Head, Slotted Terminals, Plated Brass -6 Poles -/8Ó Centers Wire Range With Wire Binding Screw #2-#2 AWG Ð 90 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 605 GP GP GP GP GP GP MM = Dim X 25.4 Hardware Options: (Hardware options may affect ratings - consult factory) 2502 = Stud /4-28 Brass (.750 H) Nuts Included See Page 93 J605 = Line to Line Jumper See Page 9 8 Single/Double Row Terminal Blocks

82 Double Row Terminal Blocks 62 RZ Series 600 Volts Base, Thermoplastic, 0 C (U.L. RTI w/o IMPACT) Wire Range With Wire Binding Screw Closed Back Design #2-#22 AWG Ð 20 Amps Screws, #6-32 Binder Head, Phil-Slot Wire Range With Sems Pressure Screw #2-#22 Terminals, Plated Brass AWG Stranded Copper Wire Only Ð 20 Amps -30 Poles UL Recognized File No. E62806 Flammability Rating 94 V-O CSA Certified File No. LR9766 7/6Ó Centers The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Catalog # # of poles A B 62 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Top Mounted Hardware is.250ó Wide MM = Dim X 25.4 Dimensions Dimensions Catalog # # of poles A B 62 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Single/Double Row Terminal Blocks Hardware Options: (Hardware options may affect ratings - consult factory) KT 37 = Full Quick Connect (0 flat) See Page 90 KT 38 = Full Quick Connect (45 Bend) See Page 90 KT 39 = Full Quick Connect (90 Bend) See Page 90 ST = Full Solder See Page HB = Line to Line Jumper 60 RJ(s) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 43 = Half Quick Connect (0 Flat) See Page 90 KT 44 = Half Quick Connect (45 Bend) See Page 90 KT 45 = Half Quick Connect (90 Bend) See Page = Sems Pressure Saddle Screw See Page = Sems Pressure Saddle Screw with External Tooth Lock Washer 82

83 Double Row Terminal Blocks 670A RZ Series 300 Volts Base, Thermoplastic, 30 C Wire Range With Wire Binding Screw Closed Back Design #2-#22 AWG Ð 20 Amps Screws, #6-32 Binder Head, Phil-Slot Wire Range With Sems Pressure Screw Terminals, Plated Brass #4-#22 AWG Stranded Or Solid Wire 2-30 Poles (Cat. Designation 3865) 3/8Ó Centers UL Recognized File No. E478 The Suitability Of These Devices For Greater CSA Certified File No. LR9766 Currents Shall Be Determined In The End-Use End-Use Application Top Mounted Hardware is.87ó Wide MM = Dim X 25.4 Dimensions Catalog # # of poles A B 670A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ Dimensions Catalog # # of poles A B 670A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ Hardware Options: (Hardware options may affect ratings - consult factory) KT 9 = Full Quick Connect (0 flat) See Page 88 KT 20 = Full Quick Connect (45 Bend) See Page 88 KT 2 = Full Quick Connect (90 Bend) See Page 88 ST = Full Solder See Page 89 J 600 = Line to Line Jumper See Page RJ(s) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 25 = Half Quick Connect (0 Flat) See Page 88 KT 26 = Half Quick Connect (45 Bend) See Page 88 KT 27 = Half Quick Connect (90 Bend) See Page = Sems Pressure Saddle Screw Y(L) = Feed Thru Solder (.32) See Page 90 LWW = Feed Thru Wire Wrap (.593) YSY = Feed Thru Solder (.500) See Page Single/Double Row Terminal Blocks

84 Double Row Terminal Blocks 67 RZ Series 300 Volts Base, Thermoplastic, 0 C (U.L. RTI w/o IMPACT) Wire Range With Wire Binding Screw Closed Back Design #2-#22 AWG Ð 20 Amps Screws, #6-32 Binder Head, Phil-Slot Wire Range With Sems Pressure Screw #2-#22 Terminals, Plated Brass AWG Stranded Copper Wire Only Ð 20 Amps -30 Poles Will Accommodate Lugs For Wire Sizes Flammability Rating 94 V-O #0-#6 AWG Ð 30 Amps 7/6Ó Centers UL Recognized File No. E62806 The Suitability Of These Devices For Greater CSA Certified File No. LR9766 Currents Shall Be Determined In The End-Use Application Dimensions Catalog # # of poles A B 67 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Top Mounted Hardware is.250ó Wide MM = Dim X 25.4 Dimensions Catalog # # of poles A B 67 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Hardware Options: (Hardware options may affect ratings - consult factory) Single/Double Row Terminal Blocks KT 37 = Full Quick Connect (0 flat) See Page 88 KT 38 = Full Quick Connect (45 Bend) See Page 88 KT 39 = Full Quick Connect (90 Bend) See Page 88 ST = Full Solder See Page 89 J60 = Line to Line Jumper See Page 9 60 RJ(s) = Multiple Position Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 43 = Half Quick Connect (0 Flat) See Page 88 KT 44 = Half Quick Connect (45 Bend) See Page 88 KT 45 = Half Quick Connect (90 Bend) See Page = Sems Pressure Saddle Screw 3767 = Sems Pressure Saddle Screw with External Tooth Lock Washer 84

85 Double Row Terminal Blocks 672 RZ Series 600 Volts Base, Thermoplastic, 0 C (U.L. RTI w/o IMPACT) Flammability Rating: 94V-O Closed Back Design Screws, #8-32 Binder Head, Phil-Slot Terminals, Plated Brass -24 Poles 9/6Ó Centers Wire Range With Wire Binding Screw #0-#4 AWG Ð 30 Amps Wire Range With Sems Pressure Screw #0-#22 AWG Stranded Copper Wire Only Ð 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 672 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Top Mounted Hardware is.250ó Wide MM = Dim X 25.4 Dimensions Catalog # # of poles A B 672 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Hardware Options: (Hardware options may affect ratings - consult factory) KT 55 = Full Quick Connect (0 flat) See Page 88 KT 56 = Full Quick Connect (45 Bend) See Page 88 KT 57 = Full Quick Connect (90 Bend) See Page 88 ST = Full Solder See Page 89 J 602 = Line to Line Jumper See Page 9 3/4 ST = Half Solder See Page 89 KT 6 = Half Quick Connect (0 Flat) See Page 88 KT 62 = Half Quick Connect (45 Bend) See Page 88 KT 63 = Half Quick Connect (90 Bend) See Page = Sems Pressure Saddle Screw See Page = Sems Pressure Saddle Screw with External Tooth Lock Washer 85 Single/Double Row Terminal Blocks

86 Terminal Block Accessories Kliptite Quick Connect Accessories Kliptite (Quick Connect) accept standard female wire terminals. These Kliptites are ideal for applications that require a positive, yet quick disconnect termination. Kliptites are assembled to the block with screws or in some applications riveted to the block. Kliptites are available in 0, 45 and 90 bends; one side or two side. Single Row: Screw Rivet Tab Tab Construction Construction Width Thickness 4 Ñ Ñ Ñ Ñ ) 2590 Series use the 599 series Kliptites. 2) 690 Series insulated feed-thru blocks use the 699 Kliptites. 3) 2690 Series PC block use the 699 Kliptites. Double Row: Screw Rivet Tab Tab Construction Construction Width Thickness 00, 670, 670A, 670ARZ 4 Ñ , 67, 67RZ, 200HB, 62RZ 5 Ñ , 672, 672RZ 6 Ñ , 600A 800A Ñ Ñ Ñ 4) 00, 670, 670A, 670ARZ Series use the 600, 600A Kliptites. 5) 200, 67, 67RZ, 200 HB, 62RZ Series use the 60 Kliptites. 6) 300, 672, 672RZ Series use same as 602 Kliptites. 86

87 Accessories Kliptite Quick Connect Single Row 4 Series 599 Series 699 Series 82 Series Screw Construction Screw Construction Screw Construction Screw Construction Tab Width.0 Tab Width.87 Tab Width.250 Tab Width.250 Tab Thickness.020 Tab Thickness.020 Tab Thickness.032 Tab Thickness.032 Terminal Block Accessories 799 Series 899 Series 92 Series Rivet Construction Rivet Construction Rivet Construction Tab Width.87 Tab Width.250 Tab Width.250 Tab Thickness.020 Tab Thickness.032 Tab Thickness.032 TWO SIDE TABS TWO SIDE TABS TWO SIDE TABS TWO SIDE TABS ONE SIDE TABS ONE SIDE TABS ONE SIDE TABS ONE SIDE TABS 87

88 Terminal Block Accessories Kliptite Quick Connect Double Row Accessories 00, 600, 600A 60, 200, 200 HB 300 Series 670, 670A, 670A 62, 67 Series 602, 672 Series 603 Series RZ Series Screw Construction Screw Construction Screw Construction Screw Construction Tab Width.87 Tab Width.250 Tab Width.250 Tab Width.250 Tab Thickness.020 Tab Thickness.032 Tab Thickness.032 Tab Thickness A Series 80 Series 802 Series Rivet Construction Rivet Construction Rivet Construction Tab Width.87 Tab Width.250 Tab Width.250 Tab Thickness.020 Tab Thickness.032 Tab Thickness.032 TWO SIDE TABS TWO SIDE TABS TWO SIDE TABS TWO SIDE TABS ONE SIDE TABS ONE SIDE TABS ONE SIDE TABS ONE SIDE TABS 88

89 Accessories Solder Terminal Lugs: ST & 3/4 ST Types Terminal Block Accessories Figure A Figure Figure 3A Figure 2 Figure 3 Figure A B C D E F G H J M N R T ALSO USED ON 4ST FIGURE 4-3/4ST FIGURE A 599-3/4ST FIG , 2590A 600ST FIG A, 670A /4ST FIG 3A ST FIG HB, 62RZ /4ST FIG 3A ST FIG /4ST FIG 3A /4ST FIG , /4ST FIG MM = Dim X 25.4 ST = (S) 3/4 ST = (HS) 89

90 Terminal Block Accessories Solder Terminal Lugs: Y, YSY & Z Types Material: Brass Finish Electro-Tin Plated Accessories Style ÒYÓ ÒYSYÓ Figure Figure 2 Figure 3 Same as Fig except as shown Same as Fig except as shown Style ÒZÓ Figure 4 Figure 5 Same as Fig 4 except as shown Figure 6 Note: For Factory Assembly only on to 603 Terminal Boards Style ÒYÓ ÒYSYÓ ÒXYÓ Detail R Style ÒZÓ Catalog # Figure A B C D E F H J M L (see detail R) also used on 599Z & 600Y FIG Z=0.3, 600Y= A RZ NA 0.44 NA 600YSY FIG A RZ Z FIG A RZ 699Z & 60Y FIG Z=0.42, 60Y= YSY FIG NA 602Y FIG NA Z & 602YSY FIG Z=0.64, 602YSY= Z FIG Y FIGURE 6 Note: for factory assembly only to 603 terminal block 0.60 MM = Dim X

91 Accessories J & JS Jumpers J 600 = LL00 J 60 = LL200 J 602 = LL300 RJ Type Jumpers J Type Jumper Material: Brass Finish: Nickel Plate JS Type Jumper *Per 5564/28B Catalog # A B C D E F G H J K J 40 (J4) NA J NA J NA J NA J NA J NA J NA TBJB NA TBJC NA JS JS JS MM = Dim X 25.4 Note : These parts are not necessarily supplied flat. The functioning of the part, however will not be interfered. Note 2: All dimensions are applicable after the bus (jumper) is torqued down into the associate terminal board Terminal Block Accessories RJS Type Jumpers Material: Brass Finish: Nickel Plate Max. no. of sections = 24 Max. no. of sections = RJ 60 RJ Note: 670ARZ, 599 Series: Use 600 RJ Wire Clamp Material: Brass Finish: Nickel Plate Max. no. of sections = RJS Note: 670ARZ, 599 Series: Use 600 RJS Max. no. of sections = RJS Catalog # Material Finish Screw Thread L A UNC-2A Steel Zinc UNC-2A UNC-2A Brass Nickel UNC-2A Brass Nickel 6-32 UNC Steel Zinc 6-32 UNC MM = Dim X 25.4 Straddle Plate Note: ÒTermi-loxÓ washer or equal CAT. NO. A B C D E F MATERIAL FINISH SPB N/A BRASS TIN SPB N/A BRASS NICKEL SPB N/A BRASS NICKEL SPB BRASS PLATE SPB BRASS TIN SPB BRASS NICKEL MM = Dim X

92 Terminal Block Accessories Kulka Fanning Strips Terminals, Brass, Tin Plated Material: XP = Phenolic, Black GME = Glass Cloth Melamine, Per MIL-M-4 Light BrownTerm 649 SERIES FOR 40 & 4 SERIES TERMINAL BLOCKS Accessories Available in XP phenolic only. 649 SERIES 649A SERIES 650 SERIES FOR 599, 600, 670A RZ SERIES TERMINAL BLOCKS 65 SERIES FOR 60 & 699 SERIES TERMINAL BLOCKS 650 SERIES FOR 602 & 82 SERIES TERMINAL BLOCKS SERIES W SERIES A A A 92

93 Accessories Kulka Stud and Turret Terminal Blocks Marathon Offers Kulka Terminal Blocks with Stud and Turret Configurations: Threaded Stud Catalog # Figure A B C 599 GP 2002 XX FIG NC 600A GP 2002 XX FIG NC 60 GP 202 XX FIG NC 602 GP 2202 XX FIG NC 603 GP 2302 XX FIG NF 604 GP 2402 XX FIG NF 605 GP 2502 XX FIG /4-28 NF 699 GP 202 XX FIG NC 82 GP 2202 XX FIG NC Terminal Block Accessories XX - Number of Terminals Note : Standard with block, but packed separately. Note 2: 604 and 605 nuts are part of the assembly. Additional nuts (one per stud) are supplied in bulk. Screw Terminal with Feed-thru Solder Terminal Catalog # Figure A B C D 4 GP 904 XX FIG NC X GP 2004 XX FIG NC X GP 2004 XX FIG NC X GP 204 XX FIG NC X GP 204 XX FIG NC X GP 2204 XX FIG NC X XX - Number of Terminals Screw Terminal with Solder Pin for Printed Circuit Board Connection Catalog # A B C D E 599 GP 2020 XX NC X GP 202 XX NC X GP 220 XX NC X GP 22 XX NC X.25 XX - Number of Terminals Individual Screw Terminals Catalog # A B C 60 GP 208 XX NC X.25 XX - Number of Terminals 93

94 Terminal Block Accessories Double Row/Top Mounted Cover Accessories White Vinyl Material Two Nylon Spring Clip For Mounting Printed On Top, Bottom Or Center Line With Letters Or Numbers For Circuit Identification Printing Character Size Is /8 Inch Series = 00/600 A GP, 600 GP, 670 A, 670 ARZ Number of A B Terminals CB (BLACK) Series 2 = 200/67 GP, 200 HB, 60 GP, 62 RZ, 67 RZ Number of A B Terminals COVER (WHITE) ORDERING CODE 94 Series 3 = 300/672 GP 602 GP, 672 RZ Number of A B Terminals NYLON SPRING CLIP CW A SERIES NO. OF TERMINALS PRINT STYLE

95 Accessories Double Row/Sub Mounted Marking Strip Black XP Phenolic Material Printed On Top Or Bottom Position With Letters Or Numbers For Circuit Identification Printing Character Size Is /8 Inch Terminal Block Accessories # of Poles 00 Series A 200 H Series A 300 Series A Series B C D E F HB

96 Terminal Block Accessories Double Row/Top Mounted Marking Strip White Vinyl Material Two Nylon Spring Clips For Mounting Printed On The Center Line With Letters Or Numbers For Circuit Identification Printing Character Size Is /8 Inch Accessories Series = 00/600 A GP 600 GP, 670A GP, 670 ARZ Number of A B Terminals Series 2 = 200/67 GP, 200 HB, 60 GP, 62 RZ, 67 RZ Number of A B Terminals SERIES Series 3 = 300/672 GP, 602 GP, 672 RZ Number of A B Terminals NYLON SPRING CLIP NO. OF TERMINALS PRINT STYLE MARKING STRIP (WHITE) SW 0 0A

97 Accessories Marker and Insulator Strips: Kulka marker strips serve as insulation between terminal blocks and chassis, as well as providing a marking surface for terminal identification. When specified, they can be printed to show terminal designations by numbers, letters, symbols or any combination thereof. Insulator strips offer the same properties, but do not provide space for terminal identification. Both marker and insulator strips can be supplied pre-mounted on the back of each block thereby simplifying assembly and inventory control. DOUBLE ROW MARKER STRIP EXAMPLE SINGLE ROW MARKER STRIP EXAMPLE Terminal Block Accessories DOUBLE ROW MARKER STRIP EXAMPLE SINGLE ROW MARKER STRIP EXAMPLE Drawing and Dimensions: Marker and insulator strips are available for Kulka Terminal Blocks. These include double and single row, single row insulated turret and single and double row blocks. Dimensions for insulator strips, which are more narrow (see dimension ÒNÓ on page 98 and 99) and do not afford a marking surface are the same as marker strips except for dimension ÒDÓ. Order Information: FEED-THRU STYLE: For feed-thru terminal blocks, see styles 2, 3, 5, 6, 8, & 9 on page 98. Insert applicable feed-thru style designation in ordering code, i.e. Y, YSY, XY, 904, 92, 2000, 2004, 2020, 202, 204, 220, AVAILABILITY: Marker and insulator strips are available to fit most Kulka Terminal Blocks. See SERIES reference numbers on page 98 and 99 for a complete listing. If not listed, consult the factory for availability. Designate appropriate prefix (MS for marker strips or IS for insulator strip) in front of the SERIES number when ordering. Available materials: XP (general purpose laminate), XXPFR (flame retardant), GME (glass cloth melamine), GEE (glass cloth epoxy). Printing: a. Marker strips are available in many printing styles. The maximum number of characters per station is two (2). b. Please specify printing style. c. If unprinting marker strips are desired, insert the letter ÒXÓ in the printing style space of the ordering code. d. Printing is the standard method of marking. e. Printing color is silver (white) on dark surfaces and black on light surfaces. PROTECTIVE COATING: Marker and insulator strips can be supplied with a fungus proof varnish (MIL-V-73A) cover coating. State on order: Òcoat after printing with MIL-V-73A varnish.ó *See block dimension for overall length and mounting Ordering Code Example MS/IS SERIES MAT. CODE FEED THRU NO. OF TERM PRINT STYLE (IF APPLICABLE) MS 60 XP Y 6 06A Contact Factory for Availability of Materials 97

98 Terminal Block Accessories Marking Strip Dimensions - Single Row Dimensions Series Style D F G K W X N* 4, 2, , 7, (799), 2, , 7, (899), 2, , 7, (92), 2, , 7, * N dimension to replace D dimension for insulator strips MM = Dim X 25.4 ** Consult factory on marker strips that are for terminal blocks with Z lugs. Accessories Single Row K TYP A REF. B D G REF. F X TYP. STYLE & 2.03 D F REF. F D G REF. F STYLE 7 & 8.03 STYLE 4 & 5.03 STYLE STYLE 2 W STYLE 4 STYLE 5 A B C D W STYLE 7 STYLE 8 A B E F E 2 3 F 3 2 C D

99 Accessories Marking Strip Dimensions - Double Row Dimensions Series Style C D F G K W X N* , 8, (800) , 8, (80) , 8, (802) , 8, , 8, , , , 8, , 8, , 8, * N dimension to replace D dimension for insulator strips ** Consult factory on marker strips that are for terminal blocks with Z lugs. MM = Dim X 25.4 Terminal Block Accessories Double Row K TYP. F A REF. B D F C G REF. D C G REF. C X TYP. F STYLE THRU 3.03 D F REF. C F STYLE 4,5,& 6.03 D F REF. STYLE 8 & 9.03 STYLE 7.03 STYLE A B C 2 3 D 2 3 STYLE 4 A B C 2 3 D 3 2 STYLE 2 W W STYLE 5 STYLE STYLE STYLE STYLE E F E F STYLE 9 A B C D E F

100 Terminal Block Accessories Marking Styles MSA, MSB, MSC Front Surface of Marker Strip Accessories Back Surface of Marker Strip Marathon Offers a Complete Line of Military Marker Strips Requirements: Type Mount: Dimensions: Material: Marking: Bottom Only See Page 99 For Charts Type GME Marker Strips Shall Be Marked In Accordance With CID A-A-5925 Ñcan be provided to MIL T5564 A single letter shall be inserted in the above type designation to specify the marking style (A, B or C). Both the front and the back of the marker strips shall be marked as indicated. The numbers shall be marked at a 45 ± 2 angle with reference to the side of the marker strip, as indicated. Type MSC37TB (black single sided marker strip) shall have the same dimensions as type MSA. 00

101 Accessories Terminal Block Printing Numeric Print Styles Terminal Block Accessories Alpha Print Styles 0

102 02-0.sectional term. blocks /25/03 0:58 AM Page 02 Sectional Terminal Blocks General Information: Sectionals are terminal blocks which are made up of individually molded units with electrically conductive members which, when assembled together, make up the block producing the required number of circuits. Marathon offers three sizes of sectional terminal blocks: 3/8Ó centers, /2Ó centers and /6Ó sectional fuse holders. All blocks can be ordered with a channel mount base, or a flat mount base for direct mounting to the panel. The 3/8Ó is also available with a DIN foot. Sectional Terminal Blocks Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Applications: Designed for electrical termination of wire where flexibility of circuit design is necessary. Accepts single or combination of wire sizes for tubular screw and tubular clamp styles. 02

103 02-0.sectional term. blocks /25/03 0:58 AM Page 03 Sectional Terminal Blocks 3/8 Sectional Volts 32 Circuits Per Foot Base, White Nylon 05 C Water Absorption 0.9% (Per ASTM D-570) (24 Hrs. % Wt. Gain) Tubular Screw Connector (TS) Copper, Tin Plated; Screw #0-32 Steel, Nickel Plated, Wire Range #8-#8 AWG Copper, 40 Amps Multiple Wire Combinations For Stranded Copper Wire Are: To 5 #8 AWG #8 AWG Or #0 AWG To 3 #2 AWG To 4 #4 AWG Or #6 AWG Multiple Wire Combinations For Solid Copper Wire Are: #0 AWG To 3 #2 AWG To 4 #4 AWG Or #6 AWG Kant Kut Connector (TSKK) Copper, Tin Plated, Screw #0-32 Steel, Nickel Plated, Pad Steel, Wire Range #0-#22 AWG Copper, 40 Amps Multiple Wire Combinations For Stranded Copper Wire Are: #0 AWG To 2 #2 AWG To 3 #4 AWG To 4 #6 AWG To 5 #8 AWG To 5 #22 AWG Multiple Wire Combinations For Solid Copper Wire Are: #0 AWG To 2 #2 AWG To 2 #4 AWG Strap (S) Brass, Tin Plated Connector, Screw #6-32 Brass, Nickel Plated, Wire Range #4-#6 AWG (Larger Wire May Be Used With Proper Termination), 20 Amps Sems (SP) Brass, Tin Plated Connector, Screw #6-32 Steel, Nickel Plated, Wire Range #2-#22 AWG, 25 Amps UL Recognized File No. E62806 CSA Certified File No. LR 9766 Sectional Terminal Blocks 03

104 02-0.sectional term. blocks /25/03 0:59 AM Page 04 Sectional Terminal Blocks Catalog # Description Std. Pack Qty. 6H38-TS-F For flat mount block 6H38-TS-C For channel mount block Tubular Screw 00 Sectional Terminal Blocks 6H38-TSKK-F For flat mount block 6H38-TSKK-C For channel mount block 6H38-S-F For flat mount block 6H38-S-C For channel mount block 6H38-SP-F For flat mount block 6H38-SP-C For channel mount block 6H38-E-F For flat mount block 6H38-E-C For channel mount block Kant Kut Connector 00 Screw 00 Sems Pressure 00 End Section 25 MC Mounting Clamp 25 J-38 Jumper for TS + TSKK 50 C-38 Cover 50 MPC-6 6 Foot channel MPC-3 3 Foot channel Channel --- MS Vinyl Marking Strip /2Ó X 2Õ White 25 04

105 02-0.sectional term. blocks /25/03 0:59 AM Page 05 Sectional Terminal Blocks 3/8 Sectional DIMENSIONS IN [MM] FLAT MOUNT Sectional Terminal Blocks CHANNEL MOUNT A =.79 + (.375 X E) B =.36 + (.375 X E) E = No. of Poles 05

106 02-0.sectional term. blocks /25/03 0:59 AM Page 06 Sectional Terminal Blocks /2 Sectional Volts 24 Circuits Per Foot Sectional Terminal Blocks Base, White Nylon Ð Type 6/6 05 C Water Absorption 0.9% (Per ASTM D-570) (24 Hrs. % Wt. Gain) Tubular Screw (TSCU) Copper, Tin Plated; Screw #/4-28 Steel, Nickel Plated, Wire Range #6-#4 AWG Copper, 70 Amps UL Recognized File No. E62806 CSA Certified File No. LR9766 Catalog # Description Std. Pack Qty. 6H2-TSCU-F For flat mount block 6H2-TSCU-C For channel mount block Tubular Screw 50 Tubular Screw 50 6H2-E-F For flat mount block End Section 25 6H2-E-C For channel mount block End Section 25 MC Metal Clamp 25 J-2 Jumper 50 MPC-6 6 Foot channel MPC-3 3 Foot channel Channel --- MS Vinyl Marking Strip 25 /2Ó X 2Õ 06

107 02-0.sectional term. blocks /25/03 0:59 AM Page 07 Sectional Terminal Blocks /2 Sectional FLAT MOUNT A =.9 + (.500 x E) B =.37 + (.500 x E) C = No. of Poles Sectional Terminal Blocks CHANNEL MOUNT 07

108 02-0.sectional term. blocks /25/03 0:59 AM Page 08 3/8 Sectional Volts 32 Circuits Per Foot General Information: DIN Sectional Terminal Blocks Sectionals are terminal blocks which are made up of individual molded units with electrically conductive members which, when assembled together, make up the block producing the required number of circuits. MarathonÕs DIN Sectional Blocks will fit on a standard DIN 3 rail. MarathonÕs DIN Sectional Blocks are recognized under the Component Programs of Underwriters Laboratories, Inc., UL File E62806, CSA File LR9766 and are listed by the Canadian Standards Associations. Sectional Terminal Blocks Base, White Nylon Ð 05 C Water Absorption 0.9% (Per ASTM D-570) (24 Hrs. % Wt. Gain) Tubular Screw Connector (TS) Copper, Tin Plated; Screw #0-32 Steel, Nickel Plated Wire Range #8-#8 Awg Copper, 40 Amps Multiple wire combinations for stranded wire are: () #8 Awg, () #0 Awg, (3) #2 Awg, (4) #4 Awg, (5) #6 Awg, (6) #8 Awg Kant Kut Connector (TSKK) Copper, Tin Plated Screw - #0-32 Steel, Nickel Plated Wire Range #0-#22 Awg copper, 40 Amps Multiple wire combinations for solid copper wire are: () #0 Awg, (2) #2 Awg, (3) #4 Awg, (4) #6 Awg, (5) #8 Awg, (6) #22 Awg Catalog # Description Std. Pack Qty. 6H38-TS-DIN Tubular Screw 00 6H38-TSKK-DIN For Din 3 Rail Mount Kant Kut Connector 00 6H38-E-DIN For Din 3 Rail Mount End Section 25 MSK35W End Bracket 25 J-38 Jumper for TS + TSKK 50 C-38 Cover 50 MN35-2 MS DIN Rail Symmetrical 35 X 7.5 mm - Punched 2 m long Vinyl Marking Strip /2Ó X 2Ó White 25 08

109 02-0.sectional term. blocks /25/03 0:59 AM Page 09 DIN Sectional Terminal Blocks 3/8 Sectional Volts 32 Circuits Per Foot Sectional Terminal Blocks B =. + (.375 x No. of Poles) A = B +.62 (With Two End Brackets) 09

110 02-0.sectional term. blocks /25/03 0:59 AM Page 0 /6 Sectional Fuse Holder 600 Volt 30 Amp Sectional Terminal Blocks Sectional Terminal Blocks Base, White Nylon Ð 05 C Connector Box Type Accepts up to #0 Awg Wire, either Terminated or Non-Terminated Clip, Copper Alloy, Tin Plated UL Recognized File No. E353 CSA Certified File No. LR2455 Std. Carton Wire Fuse Catalog # Description Qty. Range Size 6W30AF FLAT MOUNT 0 6W30AC CHANNEL MOUNT 0 6WE-F END PIECE--FLAT 0 #0-#4 3/32Ó 6WE-C END PIECE--CHANNEL 0 AWG CU DIAMETER MC CHANNEL CLAMP 25 STRANDED BY /2Ó LONG MPC-6 6 FOOT CHANNEL --- MPC-3 3 FOOT CHANNEL --- GR-2 /8Ó DIA X 2Õ LONG NYLON ROD --- Flat Mount L = (0.68 x N) C = (0.68 x N) N = No. of Poles Channel Dimensions LCH = L

111 -20.DIN Rail /25/03 :0 AM Page Din Rail Terminal Blocks General Information: Marathon DIN Rail Terminal Blocks are ideal for various applications such as machine tool controls, distribution and instrumentation installations, switchgear, elevator and panelboard construction. Insulating Materials: The moldings are made of Polyamide 6.6. This material has high creepage resistance and high impact strength. It also has a UL 94V-2 flammability rating and is resistant to gasoline, oil, alcohol and many other chemicals. Temperature Rating: 00 C / 22 F Continuous 70 C / 338 F Intermittent & Short Exposure Connector System: The connectors are of copper alloy and are nickel-plated for corrosion resistance. The screws are rolled steel, zinc plated and chromated. The total connector system provides the following benefits:. The system ensures that no matter how small the cross section of the wire it can only be inserted into the connection hole. 2. A serrated pressure plate eliminates any wire damage from the torquing of the screw. 3. The upward pressure on the screw from the pressure plate reduces the risk of a screw loosening due to vibration. 4. The pressure plate also compensates for some reduction in contact pressure caused by cold flow in the wire. 5. The design of the pressure plate and its heavy construction eliminates tilting, even with solid wires. 6. The use of rolled rather than turned screw threads provide for the application of higher torque without thread damage. Reference Chart: Catalog Number Page Amps Volts Wire Range Thickness Terminals per Foot MIK #22-#2AWG 5 mm 60 MIK #22-#0AWG 6 mm 50 MIK #22-#8AWG 8 mm 38 MIK #22-#6AWG 0 mm 30 MIK #8-#4AWG 2 mm 25 MIKTS #22-#2AWG 6 mm - MIKSI #20-#0AWG 8 mm - MIKE #22-#0AWG 7 mm - MIKE #8AWG 8 mm - MIKE #6AWG 0 mm - Contact Factory For Identification Labels DIN Rail Terminal Blocks

112 -20.DIN Rail /25/03 :0 AM Page 2 Din Rail Terminal Blocks MIK3 5 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #22-#2 Awg Ð 20 Amps UL Recognized File No. E62806 CSA Certified File No. LR Amps VDE Ð 26 Amps DIN Rail Terminal Blocks Catalog # MIK3 MN35-2 MVB2-2 MVB2-2 MVL2-2 MIW2 MIW4 MKAW2 MSK35 Description Center Section DIN Rail symmetrical 35 X 7.5 mm slotted 2 m long/ steel zinc-plated, yellow chromated Jumper 2-position Jumper 2-position Connecting straps for linking together two adjacent 2 pole jumpers Insulating end sections for covering and insulating the last terminal in an assembly Insulating partition walls for visual and electrical separation of terminal groups Safety cover with warning label for line terminals which cannot be disconnected End bracket used on both ends of the assembly to hold blocks in place Dimensions: H = 36 mm (.47") W = 42 mm (.653") T = 5 mm (.97") 2

113 -20.DIN Rail /25/03 :0 AM Page 3 Din Rail Terminal Blocks MIK5 6 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #22-#0 Awg Ð 30 Amps UL Recognized File No. E62806 CSA Certified File No. LR Amps VDE Ð 34 Amps Catalog # MIK5 MN35-2 MVB4-2 MVB4-2 MVL4-2 MSTB2 MPST2 MIW4 MIW6 MKAW4 MSK35 Description Center Section DIN Rail symmetrical 35 X 7.5 mm slotted 2 m long/ steel zinc-plated, yellow chromated Jumper 2-position Jumper 2-position Connecting straps for linking together two adjacent 2 pole jumpers Plug Sockets- test plugs of 2.3 mm Test Plugs- 2.3 mm Insulating end sections for covering and insulating the last terminal Insulating partition walls for visual and electrical separation of terminal groups Safety cover with warning label for line terminals which cannot be disconnected End bracket used on both ends of the assembly to hold blocks in place DIN Rail Terminal Blocks Dimensions: H = 38 mm (.496") W = 42 mm (.653") T = 6 mm (.236") 3

114 -20.DIN Rail /25/03 :0 AM Page 4 Din Rail Terminal Blocks MIK0 8 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #22-#8 Awg Ð 50 Amps UL Recognized File No. E62806 CSA Certified File No. LR Amps VDE Ð 6 Amps DIN Rail Terminal Blocks Catalog # MIK 0 MN35-2 MVB6-2 MVB6-2 MVL6-2 MSTB2 MPST2 MIW6 MIW50 MKAW0 MSK35 Description Center Section DIN Rail symmetrical 35 X 7.5 mm slotted 2 m long/ steel zinc-plated, yellow chromated Jumper 2-position Jumper 2-position Connecting straps for linking together two adjacent 2 pole jumpers Plug Sockets- test plugs of 2.3 mm Test Plugs- 2.3 mm Insulating end sections for covering and insulating the last terminal in an assembly Insulating partition walls for visual and electrical separation of terminal groups Safety cover with warning label for line terminals which cannot be disconnected End bracket used on both ends of the assembly to hold blocks in place Dimensions: H = 44 mm (.732") W = 42 mm (.653") T = 8 mm (.35") 4

115 -20.DIN Rail /25/03 :0 AM Page 5 Din Rail Terminal Blocks MIK6 0 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #22-#6 Awg Ð 65 Amps UL Recognized File No. E62806 CSA Certified File No. LR Amps VDE Ð 82 Amps Catalog # MIK6 MN35-2 MVB6-2 MVB6-2 MVBL6 MVL6-2 MIW6 MIW50 MKAW6 MSK35 Description Center Section DIN Rail symmetrical 35 X 7.5 mm slotted 2 m long/ steel zinc-plated, yellow chromated Jumper 2-position Jumper 2-position Removable connecting jumpers for the connection of adjacent lines Connecting straps for linking together two adjacent 2 pole jumpers Insulating end sections for covering and insulating the last terminal in an assembly Insulating partition walls for visual and electrical separation of terminal groups Safety covers with warning label for line terminals which cannot be disconnected End bracket used on both ends of the assembly to hold blocks in place DIN Rail Terminal Blocks Dimensions: H = 44 mm (.732") W = 42 mm (.653") T = 0 mm (.394") 5

116 -20.DIN Rail /25/03 :0 AM Page 6 Din Rail Terminal Blocks MIK25 2 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #8-#4 Awg Ð 85 Amps UL Recognized File No. E62806 CSA Certified File No. LR Amps VDE Ð 08 Amps DIN Rail Terminal Blocks Catalog # MIK25 MN35-2 MVB25 MVL25 MVL25-3 MVBU35 MSTB35 MPST4 MIW50 MIW70 MKAW25 MSK35 Description Center Section DIN Rail symmetrical 35 X 7.5 mm slotted 2 m long/ steel zinc-plated, yellow chromated Jumpers 2-position Connecting straps- 2 position Connecting straps- 3 position Supports for use under the MVL straps using M 6 X 5 screws Plug sockets for test plugs of 4 mm Test plugs- 4 mm Insulating end sections for covering and insulating the last terminal in an assembly Insulating partition walls for visual and electrical separation of terminal groups Safety covers with warning label for supply line terminals which cannot be disconnected End bracket used on both ends of the assembly to hold blocks in place Dimensions: H = 48 mm (.732") W = 50 mm (.653") T = 2 mm (.394") 6

117 -20.DIN Rail /25/03 :0 AM Page 7 Din Rail Terminal Blocks MIKTS4 (Disconnect) 6 mm 300 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #22-#2 Awg Ð 20 Amps CSA Certified File No. LR VDE Ð 6 Amps Catalog # MIKTS4 MN35-2 MDSBL (Plug only) MDSRT (Plug only) MPST2 MIW4 MSK35 Description Center Section Din Rail symmetrical 35 X 7.5 mm slotted 2 m long/ steel zinc-plated, yellow chromated Diode plug- blue with diode 400V, A cathode on high voltage side Diode plug- red with diode 400V, A cathode on low voltage side Test Plug- 2.3 mm Insulating end sections for covering and insulating the last terminal in an assembly End bracket used on both ends of the assembly to hold blocks in place DIN Rail Terminal Blocks Dimensions: H = 39 mm (.535") H2 = 46 mm (.800") H3 = 53 mm (2.00") W = 42 mm (.653") T = 6 mm (.236") 7

118 -20.DIN Rail /25/03 :0 AM Page 8 Din Rail Terminal Blocks MIKSI5 8 mm 300 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #22-#0 Awg Ð 0 Amps VDE - 4mm 2 IEC Amps UL Recognized Ð 0 Amps DIN Rail Terminal Blocks Catalog # MIKSI5 MN35-2 MSP20 MSP25 MIW50 MSK35 Description Center Section Din Rail symmetrical 35 X 7.5 mm slotted 2 m long/ steel zinc-plated, yellow chromated Fuses- 5 x 20; please indicate amps Fuses- 5 x 20; please indicate amps Insulating partition walls for visual and electrical separation of terminal groups End bracket used on both ends of the assembly to hold blocks in place Dimensions: H = 47 mm (.850") W = 60 mm (2.362") T = 8 mm (.35") 8

119 -20.DIN Rail /25/03 :0 AM Page 9 Din Rail Terminal Blocks MIKE4, MIKE0, MIKE6 7 mm, 8 mm, 0 mm Insulating Material, Polyamide 6.6, Green/Yellow Wire Range MIKE4 - #22-#0 Awg MIKE0 - #8 Awg MIKE6 - #6 Awg UL Recognized File No. E62806 CSA Certified File No. LR VDE Dimensions: H = MIKE4 38 mm (.496") MIKE0 44 mm (.77") MIKE6 44 mm (.732") W = 56 mm (2.204") T = MIKE4 7 mm (.275") MIKE0 8 mm (.35") MIKE6 0 mm (.394") DIN Rail Terminal Blocks 9

120 -20.DIN Rail /25/03 :0 AM Page 20 DIN Rail Adapter Accessory to Secure Surface Mount Devices on DIN Rail: Din Adapter is Made of Acetal Resin Material High Mechanical Strength and Rigidity Good Resilience and Resistance to Creep Excellent Dimensional Stability Excellent Low Temperature Toughness Wide End-Use Temperature Range Assembly Method: Press Adapter onto Rail, Fasten Component with #8 Self Tapping Screw (Screw Not Supplied) Assembly Locks Firmly onto DIN Rail The Adapter will Work with 40 Series, M Fuse Holder, Class G, Class CC, Class H 250A 30A, Class R 250V 30A Holders Consult Factory for Others Catalog Standard Number Package DIN R- 00 DIN Rail Terminal Blocks USE A #8 SELF TAPPING SCREW FOR MOUNTING COMPONENT 20

121 2-30.Military & Navy Class /25/03 :03 AM Page 2 Kulka Military Class (A-A-5925)/(MIL-T-5564) Military Class: Closed Back These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting holes are covered with molded-in reinforcement straddle plates. MIL-T-5564 Terminal Type Voltage Current Wire & Lug Information Information Class Spec # Description Max Dielectric Max Test (Max.) Screw RECMD Max MS743 Max Lug RECMD Torque Rated with Test Rated 50 C Rise Size Wire Size Lug # Width Lb-In (N-M) 37 TB / Double Screw 300 V 3000 V 5 Amp 22 Amp 0.282Ó 8-0 #6 #6 Awg - RMS RMS 60 Hz 60 Hz [7.2] [0.9-.] 38 TB / 2 Double Screw 600 V 3400 V 20 Amp 30 Amp 0.3Ó 8-0 #6 #4 Awg -4 RMS RMS 60 Hz 60 Hz [7.9] [0.9-.] 39 TB / 3 Double Screw 600 V 4000 V 30 Amp 45 Amp 0.4Ó 0-2 #8 #0 Awg -9 RMS RMS 60 Hz 60 Hz [0.4] [.-.4] 40 TB / 4 Single Screw 300 V 3000 V 7.5 Amp 5 Amp 0.282Ó 8-0 #6 #8 Awg -0 Feed Thru RMS RMS 60 Hz 60 Hz [7.2] [0.9-.] 4 TB / 5 Single Screw 600 V 3400 V 0 Amp 20 Amp 0.3Ó 8-0 #6 #6 Awg -4 Feed Thru RMS RMS 60 Hz 60 Hz [7.9] [0.9-.] 42 TB / 6 Single Screw 600 V 4000 V 5 Amp 30 Amp 0.4Ó 0-2 #8 #4 Awg -8 Feed Thru RMS RMS 60 Hz 60 Hz [0.4] [.-.4] 43 TB / 26 Double Screw 50 V 2000 V 5 Amp 7.5 Amp 0.87Ó 2-4 #2 #22 Awg Ñ RMS RMS 60 Hz 60 Hz [4.7] [ ] 44 TB / 27 Single Screw 50 V 2000 V 5 Amp 7.5 Amp 0.87Ó 2-4 #2 #22 Awg Ñ RMS RMS 60 Hz 60 Hz [4.7] [ ] 2 Military/Navy Class Terminal Blocks

122 2-30.Military & Navy Class /25/03 :03 AM Page 22 37TB-B/40TB-B Series 300 Volts Kulka Military Class (A-A-5925)/(MIL-T-5564) Base, GPT-30F, Grey Color, 30 C Closed Back Design Screws, Brass Nickel Plate, 6-32 Binder Head, Slotted Terminals, Brass Nickel Plate, Ultrasonically Inserted 2-20 Poles, Consult Factory for Longer Lengths 3/8Ó Centers Flammability Rating 94 V-O Wire Size #6-5 Amps Parts are supplied with end plates Catalog Number Dimensions Catalog Number Dimensions Number of Poles A B Number of Poles A B 37TB02B TB2B TB03B TB3B TB04B TB4B TB05B TB5B TB06B TB6B TB07B TB7B TB08B TB8B TB09B TB9B TB0B TB20B TBB Military/Navy Class Terminal Blocks Hardware Options: Feed-Thru Hardware Options: Service Options: Lug Types: Long Feed-Thru Solder Consult Factory TBLS = Half Solder 40TB B Only TBLD = Full Solder Accessories: Marking Strips = MSA, MSB, MSC Jumper = TBJA, TBJD, TBJF 22

123 2-30.Military & Navy Class /25/03 :03 AM Page 23 37TB-Military Class (A-A-5925) (MIL-T-5564/) Molded Material: Plastic: Grade F temperature rating 55 C per MIL-M-4 Screws: Brass per QQ-W-32, nickel plate per QQ-N-290 Terminal Plates: Brass per QQ-B-63, nickel plated per QQ-N-290 Electrical Rating: Rated voltage (maximum): 300 volts Current rating: 5 Amps D.W.V.: 3000 volts RMS Military Type Number Dimensions Designation of poles A B 37TB 02 F TB 03 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB 2 F TB 3 F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 20 F TB 2 F TB 22 F TB 23 F TB 24 F TB 25 F TB 26 F TB 27 F TB 28 F TB 29 F TB 30 F TB 3 F MM=Dim X TB-Military Class (A-A-5925) (MIL-T-5564/2) Molded Material: Plastic: Grade F temperature rating 55 C per MIL-M-4 Screws: Brass per QQ-W-32, nickel plate per QQ-N-290 Terminal Plates: Brass per QQ-B-63, nickel plated per QQ-N-290 Electrical Rating: Rated voltage (maximum): 600 volts Current rating: 20 Amps D.W.V.: 3400 volts RMS 23 Military Type Number Dimensions Designation of poles A B 38TB 02 F TB 03 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB 2 F TB 3 F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 20 F TB 2 F TB 22 F TB 23 F MM=Dim X 25.4 Military/Navy Class Terminal Blocks

124 2-30.Military & Navy Class /25/03 :03 AM Page 24 39TB-Military Class (A-A-5925) (MIL-T-5564/3) Molded Material: Plastic: Grade F temperature rating 55 C per MIL-M-4 Screws: Brass per QQ-W-32, nickel plate per QQ-N-290 Terminal Plates: Brass per QQ-B-63, nickel plated per QQ-N-290 Electrical Rating: Rated voltage (maximum): 600 volts Current rating: 30 Amps D.W.V.: 4000 volts RMS Military Type Number Dimensions Designation of poles A B 39TB 02 F TB 03 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB 2 F TB 3 F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F MM=Dim X 25.4 Military/Navy Class Terminal Blocks 40TB-Military Class (A-A-5925) (MIL-T-5564/4) Molded Material: Same as 37 TB Class Hardware: Lug, Brass per QQ-B-63, tin plated Electrical Rating: Rated voltage (maximum): 300 volts Current rating: 7.5 Amps D.W.V.: 3000 volts RMS 24 Military Type Number Dimensions Designation of poles A B 40TB 02 F TB 03 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB 2 F TB 3 F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 20 F TB 2 F TB 22 F TB 23 F TB 24 F TB 25 F TB 26 F TB 27 F TB 28 F TB 29 F TB 30 F TB 3 F MM=Dim X 25.4

125 2-30.Military & Navy Class /25/03 :03 AM Page 25 4TB-Military Class (AA5925) (MIL-T-5564/5) Molded Material: Same as 38 TB Class Hardware: Lug, Brass per QQ-B-63, tin plated Electrical Rating: Rated voltage (maximum): 600 volts Current rating: 0 Amps D.W.V.: 3400 volts RMS Military Type Number Dimensions Designation of poles A B 4TB 02 F TB 03 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB 2 F TB 3 F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 20 F TB 2 F TB 22 F TB 23 F MM=Dim X TB-Military Class (AA5925) (MIL-T-5564/6) Molded Material: Same as 39 TB Class Hardware: Lug, Brass per QQ-B-63, tin plated Electrical Rating: Rated voltage (maximum): 600 volts Current rating: 5 Amps D.W.V.: 3400 volts RMS 25 Military Type Number Dimensions Designation of poles A B 42TB 02 F TB 03 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB 2 F TB 3 F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F MM=Dim X 25.4 Military/Navy Class Terminal Blocks

126 2-30.Military & Navy Class /25/03 :03 AM Page 26 Kulka Military Class (A-A-5925)/(MIL-T-5564) (Solder Hardware Dimensions are not to Mil Spec) 37TBLD (Commercial Equivalent).22 [3.0].28 [7.].6 [4.].75 [9.].69 [7.5].06 [.6].22 [3.0].6 [4.0].09 [2.3].03 [.76].3.44 [7.9] [3.6] (2 HOLES) (2 HOLES) 37TBLS (Commercial Equivalent).45 [].28 [7.].23 [5.9].6 [4.0].6.06 [4.] [.6].922 [23].3 [7.9].44 2-HOLES [3.6].09 HOLE [2.3].03 [0.8] This is an assembly of the 37TB Class Terminal Board and a two-sided terminal lug (ST600). Available in lengths from 2 terminals through 3 terminals. Lugs are brass and are tin plated. This is an assembly of the 37TB Class Terminal Board and a one-sided terminal lug (3/4 ST600). Available in lengths from 2 terminals through 3 terminals. Lugs are brass and are tin plated. 38TBLD (Commercial Equivalent) 38TBLS (Commercial Equivalent).58 [40.].3.22 [7.9] [5.6].58 [40.].94 [23.8].84 [2.4] [.6] [].22 [5.6].036 [.9].3 2-HOLES [3.3].5 2-HOLES [3.8].58 [5].7 [29.7] [8.] [].22 [5.6].036 [.9].5 2-HOLES [3.8] [7.9] [5.6] [.6].3 2-HOLES [3.3] This is an assembly of the 38TB Class Terminal Board and a two-sided terminal lug (ST60). Available in lengths from 2 terminals through 23 terminals. Lugs are brass and are tin plated. This is an assembly of the 38TB Class Terminal Board and a one-sided terminal lug (3/4 ST60). Available in lengths from 2 terminals through 23 terminals. Lugs are brass and are tin plated. 39TBLD (Commercial Equivalent) 39TBLS (Commercial Equivalent) Military/Navy Class Terminal Blocks.85 [47.0].4 [0].28 [7.].09 [2.4] [3].85 [47.0].06 [26.9].94 [23.9] This is an assembly of the 39TB Class Terminal Board and a two-sided terminal lug (ST602). Available in lengths from 2 terminals through 8 terminals. Lugs are brass and are tin plated [7.].037 [0.9].3 2-HOLES [3.3].77 2-HOLES [4.5] [8].4 [0] [9.9] [7.].28 [7.].37 [34.8] [3] This is an assembly of the 39TB Class Terminal Board and a one-sided terminal lug (3/4 ST602). Available in lengths from 2 terminals through 8 terminals. Lugs are brass and are tin plated [2.4] [0.9].77 2-HOLES [4.5].3 HOLE [3.3]

127 2-30.Military & Navy Class /25/03 :03 AM Page 27 Kulka Navy Class (MIL-T-5564) Class Spec # Description Max Dielectric Max Test (Max.) Screw RECMD Max MS743 Max Lug RECMD Torque Rated with Test Rated 50 C Rise Size Wire Size Lug # Width Lb-In (N-M) 3 TB / 9 Single Stud 600 V 2000 V 45 Amp 45 Amp 0.395Ó 6-8 #8 #0 Awg -3 Single Row RMS RMS 60 Hz 60 Hz [0.0] [.8-2.0] 4 TB / 0 Single Stud 600 V 2200 V 40 Amp 40 Amp 0.395Ó 6-8 #8 #2 Awg -3 Double e Row RMS RMS 60 Hz 60 Hz [0.0] [.8-2.0] 5 TB / Feed Thru Stud 600 V 2200 V 50 Amp 50 Amp 0.395Ó 6-8 #8 #0 Awg -3 Single Row RMS RMS 60 Hz 60 Hz [0.0] [.8-2.0] 6 TB / 2 Single Stud 600 V 2200 V 30 Amp 30 Amp 0.307Ó 0-2 #6 #4 Awg -5 Double Row RMS RMS 60 Hz 60 Hz [7.8] [.-.4] 7 TB / 3 Feed Thru Stud 600 V 2200 V 40 Amp 40 Amp 0.307Ó 0-2 #6 #2 Awg -6 Single Row RMS RMS 60 Hz 60 Hz [7.8] [.-.4] 8 TB Double Stud 300 V 500 V 30 Amp 30 Amp 0.282Ó 8-0 / 4 #5 #4 Awg - 8 TBHT Double Row RMS RMS 60 Hz 60 Hz [7.2] [0.9-.] 9 TB / 5 Single Stud 300 V 500 V 35 Amp 35 Amp 0.307Ó 0-2 #6 #2 Awg Ñ Single Row RMS RMS 60 Hz 60 Hz [7.8] [.-.4] 0 TB / 6 Single Stud 600 V 2200 V 30 Amp 30 Amp 0.242Ó 0-2 #6 #4 Awg Ñ Double Row RMS RMS 60 Hz 60 Hz [6.] [.-.4] TB / 7 Feed Thru Stud 600 V 2200 V 40 Amp 40 Amp 0.242Ó 0-2 #6 #2 Awg -5 Single Row RMS RMS 60 Hz 60 Hz [6.] [.-.4] 5 TB / 9 Single Stud 600 V 2200 V 30 Amp 30 Amp 0.307Ó 6-8 #8 #4 Awg -8 Double Row RMS RMS 60 Hz 60 Hz [7.8] [.8-2.0] 6 TB / 20 Single Stud 000 V 3000 V 40 Amp 40 Amp 0.395Ó 6-8 #8 #2 Awg -3 Double Row RMS RMS 60 Hz 60 Hz [0.0] [.8-2.0] 7 TB / 2 Double Stud 600 V 2200 V 40 Amp 40 Amp 0.395Ó 0-2 #6 #2 Awg -3 Double Row RMS RMS 60 Hz 60 Hz [0.0] [.-.4] 8 TB / 22 Single Stud 600 V 2200 V 45 Amp 45 Amp 0.395Ó 6-8 #8 #0 Awg -3 Single Row RMS RMS 60 Hz 60 Hz [0.0] [.8-2.0] 25 TB Single Stud 300 V 500 V 25 Amp 25 Amp 0.242Ó 6-8 / 23 #4 #4 Awg TBHT Single Row RMS RMS 60 Hz 60 Hz [6.] [ ] 26 TB Double Stud 300 V 500 V 20 Amp 20 Amp 0.242Ó 6-8 / 24 #4 #6 Awg TBHT Double Row RMS RMS 60 Hz 60 Hz [6.] [ ] Notes: MIL-T-5564 Terminal Type Voltage Current Wire & Lug Information Information Molded materials is MAI-60 in accordance with MIL-M-4. Description: SR = Single row DR = Double row DRL = Double row linked SRTC = Single row connection Application sets are as follows: Set A Ð These terminal boards are intended for use in equipment where the effect of a short circuit is limited to the terminal board and where normal operation powers up to 50 watts are involved. Set B Ð These terminal boards are intended for use where secondary short circuit protection in the form of fuses, circuit breakers and other parts are provided in the circuit, and where normal operating power does not exceed 2000 watts per terminal. Set C Ð These terminal boards are for power applications in excess of 2000 watts (per terminal) but still protected by secondary devices in the circuit which can safely interrupt resultant short circuit currents. The stud connector for these terminal boards is considered part of the stud and is required, unless otherwise specified. With the stud connector removed, the terminal board will provide twice the number of connection points and allow for an additional wire per terminal; however, the application set will be reduced as shown. The designation plate shall be supplied with the terminal board unless otherwise specified. Nuts and connectors are unplated brass and shipped unassembled. 27 Military/Navy Class Terminal Blocks

128 2-30.Military & Navy Class /25/03 :03 AM Page 28 Kulka Navy Class (MIL-T-5564) 3TB (MIL-T-5564/9) 4TB (MIL-T-5564/0) Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Nuts 4 TB 08F TB 20F MM = Dim X TB (MIL-T-5564/) Single Row, Through Connection Number of Type Terminals Dim. A Dim. B Nuts 5 TB 08F TB 0F MM = Dim X TB (MIL-T-5564/2) Military/Navy Class Terminal Blocks 28 Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Nuts 6 TB 06F TB 0F TB 24F MM = Dim X 25.4

129 2-30.Military & Navy Class /25/03 :03 AM Page 29 Kulka Navy Class (A-A-5925)/(MIL-T-5564) 7TB (MIL-T-5564/3) 8TB (MIL-T-5564/4) Double Row, Linked Front Connection Number of Terminals Type w/stud w/o stud Dim. A Dim. B Nuts connectors connectors 8 TB 02F TB 06F TB 08F TB 0F MM = Dim X TB (MIL-T-5564/5) Single Row, Front Connection Number of Type Terminals Dim. A Nuts 9 TB 02F TB 04F MM = Dim X TB (MIL-T-5564/6) TB (MIL-T-5564/7) 29 Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Dim. C Nuts 0 TB 8F TB 28F Single Row, Through Connection MM = Dim X 25.4 Number of Type Terminals Dim. A Dim. B Dim. C Nuts TB 04F TB 06F TB 4F MM = Dim X 25.4 Military/Navy Class Terminal Blocks

130 2-30.Military & Navy Class /25/03 :03 AM Page 30 Kulka Navy Class (MIL-T-5564) 5TB (MIL-T-5564/9) Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Nuts 5 TB 0F TB 24F MM = Dim X TB (MIL-T-5564/20) Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Nuts 6 TB 04F TB 0F MM = Dim X TB (MIL-T-5564/2) Double Row, Front Connection Number of Terminals Type w/stud w/o stud Dim. A Dim. B Nuts connectors connectors 6 TB 0F MM = Dim X TB (MIL-T-5564/23) Single Row, Front Connection Type Number of Terminals Dim. A Dim. B Nuts 25 TB 02F TB 05F TB 06F TB 07F TB 09F TB 0F TB 2F MM = Dim X 25.4 Military/Navy Class Terminal Blocks 26TB (MIL-T-5564/24) 30 Double Row, Linked Front Connection Number of Terminals Type w/stud w/o stud Dim. A Dim. B Nuts connectors connectors 26 TB 06F TB 08F TB 0F TB 2F MM = Dim X 25.4

131 3-35.Stud Feed Thru /25/03 :05 AM Page 3 Studded Power Feed Thru Terminal Blocks ST722 Family Marathon Special Products is proud to introduce to the industry our new studded power feed thru terminal blocks. These terminal blocks were designed for applications where power feed thru is necessary using standard double hole lugs with.625" spacing. Stud Feed Thru These terminal blocks are available in three mounting options (end mount, back mount, and slide-in mount) and are offered in various line lengths. These terminal blocks lower cost by eliminating multiple components and assembly time. The terminal blocks are manufactured from top quality insulator and conductor materials. Designed with a robust one-piece insulator base using a one-piece conductor permanently assembled together. Offered with various hardware options (See Description Below). Covers are molded using a one-piece design and are available as an option for all series of terminal blocks. Optional Cover Available: - Cover is offered in Ð 6 poles - One cover accommodates all series - Base, Thermoplastic - Flammability UL 94 V-0 Catalog Number Dimensions A Number of Poles C C C C C C Series Mounting Stud Poles Hardware ST722 B Ð Back Mount 25 Ð /4" Stud (Back Mount) 02 Ð 06 (blank) Ð No hardware S Ð Slide Mount (Slide Mount) 0 Ð 04 UH Ð All nuts shipped bulk E Ð End Mount (End Mount) 0 Ð 06 AH Ð All nuts assembled DL Ð Assembled barrier side, remainder shipped bulk 3

132 3-35.Stud Feed Thru /25/03 :05 AM Page 32 Studded Power Feed Thru Terminal Blocks Stud Feed Thru ST722B25 Series (back mount) Electrical: 300 Volts (UL 059 Class B and C) 75 Amps Wire Range #2/0 - #8 (Accommodates Two Hole Compression Lugs on.625" Centers Ð wires #2 and larger may require narrow lugs) General/Mechanical: Base, Thermoplastic, 25 C (UL RTI) Studs, /4-20 Brass, Tin Plated 2 Ð 6 Poles.73" Centers Application Torque 50 lb-in Inquire About Alternate Stud Sizes The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. E62806 CSA Certified File No. LR9766 Catalog Number Dimensions A Number of Poles ST722B ST722B ST722B ST722B ST722B (#6 THREAD CUTTING SCREW PROVID- ED) 32

133 3-35.Stud Feed Thru /25/03 :05 AM Page 33 Studded Power Feed Thru Terminal Blocks ST722S25 Series (slide-in mount) Stud Feed Thru Electrical: 300 Volts (UL 059 Class B and C) 75 Amps Wire Range #2/0 - #8 (Accommodates Two Hole Compression Lugs on.625" Centers Ð wires #2 and larger may require narrow lugs) General/Mechanical: Base, Thermoplastic, 25 C (UL RTI) Studs, /4-20 Brass, Tin Plated Ð 4 Poles.73" Centers Application Torque 50 lb-in Inquire About Alternate Stud Sizes The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. E62806 CSA Certified File No. LR9766 Catalog # Number Dimensions A of Poles ST722S ST722S ST722S ST722S

134 3-35.Stud Feed Thru /25/03 :05 AM Page 34 Studded Power Feed Thru Terminal Blocks Stud Feed Thru ST722E25 Series (end mount) Electrical: 300 Volts (UL 059 Class B and C) 75 Amps Wire Range #2/0 - #8 (Accommodates Two Hole Compression Lugs on.625" Centers Ð wires #2 and larger may require narrow lugs) General/Mechanical: Base, Thermoplastic, 25 C (UL RTI) Studs, /4-20 Brass, Tin Plated Ð 6 Poles.73" Centers Application Torque 50 lb-in Inquire About Alternate Stud Sizes The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. E62806 CSA Certified File No. LR9766 Catalog Number Dimensions A Dimensions B Number of Poles ST722E ST722E ST722E ST722E ST722E ST722E

135 3-35.Stud Feed Thru /25/03 :05 AM Page 35 Single Stud Connection Block Base, Thermoplastic Temperature rating of 25 C (UL RTI) Hardware, Stainless Steel 300V Recommended Mounting Screw /4Ó Available with two stud sizes: 5/6Ó or 3/8Ó Designed for two or more wire lugs Single Stud Connection Block 5/6 Stud 3/8 Stud Catalog# ST703 Catalog# ST