Fusible. Fusible disconnect switches 30A 800A, 600V. Disconnect switches. Fusible

Transcription

1 disconnect A 800A, V ABB PowerLine includes seven different amperage sizes from A to 800A. All ABB fusible are designed to meet customer requirements in terms of high interrupting capacity and long electrical life while occupying little more panel space than the appropriate fuses. The basic construction provides flexibility and high performance in an extremely compact size. ABB PowerLine are a perfect choice to withstand the heat and humidity of the tropics, the extreme cold of the arctic and any rugged industrial environment you may have. International acceptance ABB fusible are available with a wide range of fuse clip options: UL USA CSA Canada DIN Europe BS United Kingdom NFC France Ultra-rapid As well as the corresponding approvals: UL listed, CSA approved, IEC rated, CE marked, and most other international standards. UL98 (CSA 22.2 No.4) UL File # E101914, CSA File #LR58077 For A 800A, OH pistol grip handles Suitable for use as motor disconnects or industrial control panel disconnects on service entrance equipment, panelboards, switchboards, industrial control equipment, motor control centers, etc. and are horsepower rated and ampere rated. IEC Tested in accordance to IEC and 3, IEC 664, IEC 269, and IEC 4 CE Compliance with the European Machine Directive IEC 4 (EN 604) Low Voltage Products & Systems.19

2 Selection guide OSAFCC12 OES800L3 OSAF_12 OS60J12 OS100J03 OS0J03 OS400J03 OSJ03 OES800L3 3 pole OSAFCC12 OSAFJ12 OS60J12 OS100J03 OS0J03 OS400J03 OSJ03 OES800L3 General purpose amp rating A reference Page # Approvals 1 2 pole N/A N/A N/A UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC 3 pole UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC 4 pole UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC Technical ratings (UL,CSA) Max operating voltage V Max horsepower rating Three phase Single phase 240V HP V HP V HP V HP V HP 3 3 UL fuse class CC J J J J J J L Technical ratings (IEC) Rated insulation and operational voltage. AC and DC V Rated thermal current, I th AC /DC open A AC /DC enclosed A AC 21A 0V A V A Rated operational power AC23 400/415V kw 14/15 14/15 80/ / / V kw Physical characteristics 3 pole switch lb pole lb Dimension 3 pole H in W in D in Accessories Double break contacts S S S S S S S S Fuse cover S S S S S S S S Terminal lug kit Integral Integral Integral OZXA-24 OZXA-0 OZXA-400 OZXA-800 OZXA-27 Terminal shroud Not required Not required Not required Auxiliary contact Shaft/handle diameter 6mm 6mm 6mm 6mm 6mm 12mm 12mm 12mm.24 x.24".24 x.24".24 x.24".24 x.24".24 x.24".47 x.47".47 x.47".47 x.47" Handle UL/NEMA type Type 1, 3R, 12 Type 1, 3R, 4, 4X, 12 Recommended pistol handle length 45-65mm 45-65mm 45-65mm 45-65mm 65-80mm mm mm mm Maximum recommended shaft length 290mm 290mm 290mm 290mm 290mm 595mm 595mm 595mm Electrical interlock S = Standard = Available = Not available 1 UL listed are also CSA approved.. Low Voltage Products & Systems

3 Selection information Standard part designation 1 OS Switches ( to 60A) OS F A J 22 F Amperage = amps 60 = 60 amps Fuse Type/Class J = Class J fuse compatible CC= Class CC fuse compatible OS Switches (100A) OS 100 J 03 Number of poles and placement of the mechanism 12 = 1 Pole to the left of mechanism, 2 poles to the right of mechanism 22 = 2 Poles to the left of mechanism, 2 poles to the right of mechanism Amperage 100 = 100 amps Fuse Type/Class J = Class J fuse compatible Number of poles and placement of the mechanism 03 = 3 Poles to the right of mechanism 04 = 4 poles to the right of mechanism OS Switches (0A and above) OS 0 J 04 F Amperage 0 = 0 amps 400 = 400 amps = amps Fuse Type/Class J = Class J fuse compatible Selector Handles OHB S 1 P H Number of poles and placement of the mechanism 03 = 3 Poles to the right of mechanism 04 = 4 poles to the right of mechanism 12 = 1 Pole to left of mechanism, 2 poles to right 22 = 2 Poles to left of mechanism, 2 poles to right = 3 Poles to the right of mechanism 40 = 4 Poles to the right of mechanism Handle Color B = black Y = Red/Yellow Pistol Handles O H B 65 J 6 E011 Physical Size Connection to Switch A = external shaft P = snap on R = screw Protection Class H = 1 J= 1, 3R, 12 Handle Color B = Black Y = Red/Yellow M = Stainless Steel Handle Length 65 = 65mm 80 = 80mm 125 = 125mm 145 = 145m 175 = 175mm 275 = 275mm Environmental Rating J = 1, 3R, 12 L = 1, 3R, 12, 4, 4X Shaft Diameter 6 = 6mm 12 = 12mm Special Configuration E011 = 3 position transfer switch handle 1 Part designation keys are provided for reference only. Not all variations or configurations are available. Low Voltage Products & Systems.21

4 Base & DIN rail mounted 800A For a complete assembly, please select one of each: 1 switch (pg..24) 1 handle (pg..25) 1 shaft (pg..26) 1 terminal lug kit (pg..27) (Only required for 100A & above.) OS400J03 + OXP12X280 + OHB145J12 + OZXA-24 UL 98 UL general purpose amp rating UL Fuse Type V J CC 1 2 Pole 3 Pole 4 Pole OSFAJ12 OSFACC12 $ OSFAJ22F OSFACC22F $ J OS60J OS60J22F J OS100J03 5 OS100J04F J OS0J02 $ 1, J OS400J02 1,680 J OSJ02 2, OS0J03 OS0J OS0J12 OS400J03 OS400J OS400J12 OSJ03 OSJ OSJ12 1,380 1,380 1,380 1,860 1,860 1,860 4,613 4,613 4,613 OS0J04F OS0J13F OS0J22F 1,725 1,725 1,725 OS400J04F 2,3 OSJ04F 5, L OES800L2 4,280 OES800L3 4,760 OES800L4 5,9 1 Rejection style fuses only..22 Discount schedule H4 [D4]: 100A Low Voltage Products & Systems Discount schedule H5 [D5]: 0A 800A

5 Standard handles & shafts OHBS2AJ1 OHB J6 OHY J6 OHB4 OHM125L12 Recommended handles & shafts Switch Shaft diameter Recommended standard Maximum recommended pistol handle length shaft length OS x6 mm -.24 x.24" mm 290 mm OS0 6x6 mm -.24 x.24" mm 290 mm OS400-12x12 mm -.47 x.47" mm 595 mm OES800 12x12 mm -.47 x.47" mm 595 mm Selector handles for use with.24 x.24" (6mm) OXS6X_shafts 2 3 UL/NEMA Type IEC type Color Marking Defeatable Padlockable (lbs) 1, 3R, 12 IP65 Black O/I & Off/On NOTE: Selector handles are not recommended for use with fusible over A. Pistol handles for use with.24 x.24" (6mm) OXP6X_ shafts OHBS2AJ1 $ OHBS2AJ UL/NEMA Type IEC type Color Marking Length in/mm Defeatable Padlockable (lbs) 1, 3R, 12 IP65 Black O/I & Off/On 2.6/ OHB65J6 $ 80 1, 3R, 12 IP65 Black Off/On/Test 2.6/ OHB65J6T , 3R, 12 IP65 Black O/I & Off/On 3.1/80 0. OHB80J6 90 1, 3R, 12, 4, 4X IP66 Black O/I & Off/On 3.1/80 0. OHB80L6 1 1, 3R, 12, 4, 4X IP66 Stainless Steel O/I & Off/On 2.6/ OHM65L6 7 1, 3R, 12 IP65 Black w/ stainless hasp O/I & Off/On 2.6/ OHB65J6EH 2 1, 3R, 12, 4, 4X IP66 Black w/ stainless hasp O/I & Off/On 2.6/ OHB65L6EH 290 Pistol handles for use with.47 x.47" (12mm) OXP12X_ shafts 2 3 UL/NEMA Type IEC type Color Marking Length in/mm Defeatable Padlockable (lbs) 1, 3R, 12 IP65 Black O/I & Off/On 1, 3R, 12, 4, 4X IP66 Black O/I & Off/On 4.9/ / / / / OHB125J12 OHB145J12 OHB175J12 OHB145L12 OHB175L12 1, 3R, 12, 4, 4X IP65 Metal Off/On 8.7/ YASDA , 3R, 12, 4, 4X IP66 Stainless Steel O/I & Off/On 1, 3R, 12 IP65 Black w/ stainless hasp O/I & Off/On 1, 3R, 12, 4, 4X IP66 Black w/ stainless hasp O/I & Off/On 4.9/ / OHM125L12 OHM175L12 OHM275L12 $ ,100 1,0 4.9/ OHB125J12EH / OHB175J12EH 3 4.9/ OHB125L12EH 3 6.9/ OHB175L12EH 390 Direct mount handle 23 For use on Description Marking Color Padlockable OS No shaft required O/I/Test Black 0.10 OHBS5 $ 60 OS No shaft required O/I Black 0.10 OHB4 60 OS0 No shaft required O/I Black 0. OSV0BK 134 OS400 No shaft required O/I Black 0. OSV400BK 173 OS No shaft required O/I Black 0. OSV800BK 212 OS400-, OES800 Mounts on 12mm shaft Metal No 0.78 YASDA The OS_ switch has a TEST position, accessed by rotating the mechanism 45 degrees counterclockwise from the OFF position. In the TEST position, optional auxiliary contacts, OA4B1C, are actuated but the main switch contacts are not. 2 Red/Yellow handles are available by substituting the OHB prefix with OHY. 3 All handles are plastic unless otherwise noted as metal or stainless steel. Low Voltage Products & Systems Discount schedule H6 [DH]: Handles, shafts.23

6 Standard handles & shafts OXS6X_ OXP6X_ OXP12X_ Shafts for use with OH selector handles.24 x.24" (6x6 mm) Shaft length (in/mm) Maximum mounting depth (inches) (Lbs.) 5.1 / OXS6X1 $ / OXS6X / OXS6X / OXS6X3 NOTE: Selector handles and shafts are not recommended for use with fusible over A Shafts for use with pistol handles.24 x.24" (6x6 mm) Shaft length (in/mm) Maximum mounting depth (inches) (Lbs.) OS OS60 OS100 OS0 5.9 / OXP6X / OXP6X / OXP6X / OXP6X / OXP6X4 28 Shafts for use with pistol handles.47 x.47" (12x12 mm) Shaft length (in/mm) Maximum mounting depth (inches) (Lbs.) OS400 OS, OES / OXP12X280 $ / OXP12X / OXP12X / OXP12X / OXP12X Mounting depth is distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length..24 Discount schedule H6 [DH]: Handles, shafts, accessories & lug kits Low Voltage Products & Systems

7 Standard fusible accessories Base & DIN rail mounted Auxiliary contacts snap-on mounting Description For Use On (Lbs.) AC Thermal amp rating AC rated voltage Form C 1 N.O. & 1 N.C. OS OA4B1C $ 40 1 N.O. OS - OS OA1G10 1 N.C. OS - OS OA3G01 Module for auxiliary contacts OS OS0 - OS OSZ4 OEA28 OSFAJ12 with auxiliaries Auxiliary contacts front mounting OA1G10, OA3G01 Description 1 N.O. + 1 N.C. 2 N.O. + 2 N.C. 4 N.O. + 4 N.C. 2 N.O. 4 N.O. 8 N.O. For Use On OES800 OES800 (Lbs.) AC Thermal amp rating AC rated voltage OZXK-1 OZXK-2 OZXK-3 OZXK-4 OZXK-5 OZXK-6 $ OS OS60 - Mounting & installation considerations Form C contacts mount directly to switch Maximum two Form C contacts OA1G10 (1 N.O.) + OA3G01 (1 N.C.) require mounting base Maximum 6 OA1G10 + OA3G01 contacts with mounting base OSZ4 Mounting to left side of switch with OEA28 module: Maximum 8 contact blocks Mounting under mechanism cover: Maximum 4 contact blocks OEA28 OZXA-24 Terminal lugs For Use On Wire Size Wire Type Lugs/Kit OS100 #14-2/0 Cu/Al 6 OZXA-24 1 $ 24 OS0 OS400 OS OES800 #4-0 kcmil #4-0 kcmil (6) 14-6 AWG #2 - kcmil (2) #2-0 kcmil (2) #2-0 kcmil (2) #2 - kcmil (2) - kcmil (12) #14-6 kcmil (2) #2 - kcmil (2) #2 - kcmil Cu/Al Cu/Al Cu/Al Cu/Al OZXA-0 OZXA-0/3 OZXA-6/S OZXA-400 OZXA-402 OZXA-33 OZXA-800 OZXA-800/3 OZXA-175/400 OZXA-27 OZXA-27/3P OZXA-27 OZXA-175/400 1 Not suitable for use on cable operated flange version of OS100. Low Voltage Products & Systems Discount schedule H6 [DH]: Handles, shafts, accessories & lug kits.25

8 Standard fusible accessories Base & DIN rail mounted Additional poles Description Detachable neutral mounts on side of switch or DIN rail For use on OS OS60 OS100 OES800 (Lbs.) AC Thermal amp rating AC rated voltage OESA-ZX171 OSZ1 OSZ2 OESA-ZX88 $ OESA-ZX171 OSS160T3 Terminal shrouds 1 Description Terminal shroud for one pole Terminal shroud for 3 poles 3 pole long type shrouds 3 pole short type shrouds 4 Pole long type shrouds 4 pole Short type shrouds 3 Pole includes one shroud for line or load side 2 For Use On OS100 OS100 OS0 OS0 OS0 OS0 OS400 OS OES800 (Lbs.) OSS160T1 OSS160T3 OSS0G1L/3 OSS0G1S/3 OSS0G1L/4 OSS0G1S/4 OSS403 OSS603 OESA-ZX125 $ OSS0G1S/3 OSS0G1L/3 Fuse monitors Blown fuse indicators/monitors For Use With Rated Voltage (lbs) OS- and OES OFM240 OFM Suitable for 1 or 3 phase circuits. Includes 1 N.O. and 1 N.C. auxiliary contacts and red & green LED lights for indication. Fuse Monitor Mounting Accessories $ For Use With Crimp Terminal size (mm) OS OFMZX2 $ OS400-, OES800 Includes 6 crimp terminals OFMZX4 70 Oesa-zx70 OESA-ZX123 OESA-ZX125 OFM_ Fuse carriers/covers Description For Use on CC fuse carrier (Qty. 1) J fuse carrier (Qty. 1) Solid link carrier (Qty. 1) Removable fuse carrier (Qty. 3) Removable fuse carrier (Qty. 4) Transparent fuse cover Fuse Cover 2 pole fuse cover 3 pole fuse cover 4 pole fuse cover Fuse Cover Interlock - prevents fuse cover from being opened when the switch is in the ON position OSAFCC_ OSAFJ_ OS_ OS60J12 OS60J22F OS100 OS0 OES800 OESAZD48 OESAZD28 OESAZD55 OSC60J3 OSC60J4 CXBY68362 CXBY68674 OESA-ZX216 OESA-ZX196 OESA-ZX197 $ OES800 OESA-ZX4 90 OSC60J_ CXBY68362 Oesa-zx271 Oesa-zx216 Oesa-zx272 Oesa-zx196 Oesa-zx273 Oesa-zx197 1 ABB are IP touchsafe as standard. Terminal shrouds provide an extra degree of protection. 2 For 4 pole shrouds, please consult factory..26 Discount schedule H6 [DH]: Handles, shafts, accessories & lug kits Low Voltage Products & Systems Discount schedule H7 [DR]: Accessories & replacement parts

9 Standard fusible accessories Base & DIN rail mounted Miscellaneous accessories & replacement parts Shaft accessories Accessory Type Description For Use On Shaft Adapter Adapts one end of a 6m shaft to 12mm (use with shaft extension coupler) 6mm shafts 0.2 OETL-ZK19 $ 40 OHZX10 Shaft Extension Coupler Shaft Guide Joins two shafts together for applications where extended length is required Fits all pistol grip handles, mounts on the inside of the enclosure door with provided hardware 6mm shafts 12mm shafts OESA-ZX167 OETL-ZX pistol handles - OHZX10 12 Locking accessories Accessory Type Description For Use On OETL-ZX95 Cam Attachment Electrical Interlock = Coil Voltage Shorting bars Description for Kirk Key, Castell, Low & Fletcher and Ronis interlock. For adapting to the interlock system. The interlock is not included. Closed circuit principle for interlocking the switch movement. When the coil circuit is dead, A-types cannot be operate to O-position and L-types cannot be operated to ON- or OFF-position. Coil voltages 110VAC, 2 VAC, 24VDC, 48VDC, 60VDC, 110VDC, 2VDC, P - 15W U = Un (U = coil voltage, Un = nominal voltage) For Use On AC thermal amp rating OS60-OS0 OS400-OS OES OETL-ZW16 OETL-ZW5 OETL-ZT80A OETL-ZT80L $ AC rated voltage Dummy Fuse OS60 60 OESA-ZD54 $ Solid links: metal strap OS100 OS OESA-ZS36 OESA-ZK OETL-ZW16 T type fuse adapter kit For Use on For Use with AC thermal amp rating AC rated voltage Poles OES800 0 & V Class T fuse OESA-ZX1-L8T6 $ 280 DIN rail Replacement parts Item Description For use on Terminal cover Covers terminal below fuse carrier OS_ CXBY67121 $ 10 Phase Barrier - OS0 CXBY Shaft Set Screw - OS_ FLSWM5X8AX 2 OESA-ZX1-J1T6 Low Voltage Products & Systems Discount schedule H6 [DH]: Handles, shafts, accessories & lug kits.27

10 Special configurations Shaft operated flange A - 100A For a complete assembly, please select one of each. Switch Handle Shaft Lug kit (as required) A -100A Flange operated fusible (Shaft) 3 pole UL general purpose amp rating A UL fuse type V Maximum horsepower rating Three phase 240V 480V V J CC J J OSFAJF OSFACCF OS60JF OS100JF $ OSFAJF Flange handles UL/ NEMA type Marking Defeatable Padlockable 1, 3R, 12 4, 4X OFF/ON OFF/ON DSFHN-HS12 DSFHN-HS4 $ Shafts For use with: Maximum enclosure depth (inches) OS_ - OS100_ DSFHS-12 DSFHS-17 DSFHS-22 $ DSFHN-HS DSFHS- Terminal lug kits and accessories For use on: Description Wire size Wire type Qty. OS_ OS60_ OS100_ OS_- OS100_ Lug Lug Lug Aux. Contact Aux. Contact # - #8 #14 - #4 #14-2/0 1 NO 1 NC Cu Cu Cu/Al Integral Integral OZXA-24 OA1G10 OA3G01 OS_ Adapter Needed for mounting aux. Contacts on OS_ 1 OSZ4 OS100_ Shroud Includes one set of 3 for use on line or load side 1 OSS160T3 60 $ 24 Door hardware NEMA 12 Item OZXA-24 Safety door latch, 2 point, door less than 40 high Safety door latch, 3 point, door greater than 40 high KDH2R KDH3R $ OA1G Flange operated fusible and non-fusible disconnect ABB s solution for complying with the new NFPA79 requirements is Flange Operated and Non-fusible Switches. New 02 NFPA 79 changes requires main disconnecting means to be operable without the use of accessory tools or devices, independent of door position. This code also includes an interlocking provision to prevent the closing of disconnects while the enclosure door is open, unless an interlock is operated by a deliberate action. The flange operated disconnect are available as ridged shaft or flexible cable operated versions. The cable operated version allows you to install the disconnect switch anywhere in the enclosure depending on the length of the cable. Cables are available in lengths up to 84 inches. The designs are cost-effective NFPA 79 solutions offering quick and easy installation..28 Discount schedule H4 [D4]: - 100A Discount schedule H6 [DH]: Handles, shafts, accessories and lug kits Low Voltage Products & Systems Discount schedule SH [SH]: Door hardware kits

11 Special configurations Cable operated flange A - 0A For a complete assembly, please select one each of the following: Switch Handle Cable Lug kit (as required) Operating mechanism Maximum horsepower rating UL general purpose amp rating UL fuse type V Three phase 240V 480V V J CC J J J OSFAJ12 OSFACC12 OS60J12 OS100AJ OS0J $ ,380 OS60J12 Flange handles UL98; File #E For use with: OS_12, OS60J12, OS100AJ, OS0J Environmental rating NEMA 1, 3R, 12 OHF1C12 $ 213 NEMA 4, 4X OHF1C4 243 Flexible cables OHF1C12 For use with: OS_12, OS60J12, OS100AJ, OS0J Cable length (inches) OXC1L36 OXC1L48 OXC1L60 OXC1L72 OXC1L84 $ OXC1L36- OXC1L84 Operating mechanisms For use with: OSAFJ12, OSAFCC12 MKCS2 $ 135 OS60J12 MKCS3 162 OS100AJ, OS0J MKCS4 171 Terminal lug kits For use with OS100AJ OS0J Wire size Wire type Description Lugs per kit #4 0 Kcmil Cu/Al 6 OZXA-0 $ 80 #4 0 Kcmil Cu/Al 3 OZXA-0/3 40 (6) #4-6 AWG Cu/Al Distribution lug 3 OZXA-6/S 0 Lug Kit Door hardware NEMA 12 Item Safety door latch, 2 point, door less than 40 high Safety door latch, 3 point, door greater than 40 high KDH2R KDH3R $ OZXA-0 Discount schedule H3 [D3]: A - 100A Discount schedule H6 [DH]: Handles, shafts, accessories and lug kits Low Voltage Products & Systems Discount schedule H5 [D5]: 0A - 800A.29 Discount schedule SH [SH]: Door hardware kits

12 Other configurations High speed fuse pattern Special type fuses For a complete assembly, please select one of each: 1 switch body 1 adapter kit 1 shaft 1 handle OESA_R_ + OESAZX_ + OXP_ + OH_ Selecting switch bodies and adapter kits Please select switch body and adapter kit according to your fuses. Switch body alone can not be used an adapter kit is always needed. American standard Switch bodies 0A through 800A UL Maximum horsepower rating Max. allowed fuse power general purpose Three phase dissipation at amp rating 240V 480V V rated current (lbs) 3 pole W OES0R W 17. OES400R W OESR W OES800R03 4 pole W 17.4 OES0R W 19.4 OES400R W 46.3 OESR W 46.3 OES800R04 DIN Flush end Fuse adapter kits for OES0 OES400 Fuse adapter kits for OES OES800 For 3 pole switch For 3 pole switch For 4 pole switch Fuse standard American standard OESAZX1-S4 OESAZX1-S5 OESAZX1-S4/4 OESAZX1-S5/4 DIN80 (DIN43653) OESAZX1-S7 OESAZX1-S7/4 DIN80 sizes 00 and 000 (DIN 43653) OESAZX1-S9 OESAZX1-S9/4 DIN110 (DIN43653) OESAZX1-S2 1 OESAZX1-S2/4 1 DIN140 (DIN43653) OESAZX1-S6 OESAZX1-S6/4 Flush-end, 70mm body OESAZX1-S8 OESAZX1-S8/4 Flush-end, mm body OESAZX1-S3 OESAZX1-S3/4 French OESAZX1-S10 OESAZX1-S10/4 French with micro OESAZX1-S11 OESAZX1-S11/4 For 4 pole switch Fuse standard American standard OESAZX2-S4 OESAZX2-S4/4 DIN80, DIN 110, DIN 140 (DIN43653) OESAZX2-S2 OESAZX2-S2/4 Flush-end, mm and 70mm body OESAZX2-S3 1 OESAZX2-S3/4 1 French OESAZX2-S5 OESAZX2-S5/4 French with micro OESAZX2-S6 OESAZX2-S6/4 Handles and shafts see pages Selecting the right fusible disconnect for HSF fuses may be difficult. Due to UL restrictions it is not possible to give a general fuse selection table for your use. Therefore we ask you to contact ABB Inc., Wichita Falls, in application issues. Information needed is nominal current of the application and catalog of the fuse. French style 1 Consult Factory. Discount schedule H4 [D4]:, A 100A. Discount schedule H5 [D5]:, 0A 800A Low Voltage Products & Systems Discount schedule H6 [DH]: Handles, shafts, accessories & lug kits

13 Other configurations High speed fuse pattern Standard For a complete assembly, please select one switch catalog which includes: Switch body + shaft + handle Selecting switch bodies There are some HSF fuses that fit in standard pattern fusible disconnects, no adapter kits needed. DIN-style fusible disconnects 32A through 800A1 UL general purpose AC23A rated operational power in kw Fuse amp rating 2V 400V 0V 690V type (lbs.) DIN 436 NFC Style 3 pole 4 pole DIN 000, OS32RD DIN 000, OS63RD DIN 000, OS160RD DIN 43653: 000/ OS160RD DIN 0, OESA2RD DIN 0, 1, 2.3 OESA400RD DIN OESA6RD DIN OESA800RD DIN 000, OS32RD DIN 000, OS63RD DIN 000, OS160RD DIN 43653: 000/ OS160RD DIN 0, 1.1 OESA2RD DIN 0, 1, 2.7 OESA400RD DIN OESA6RD DIN OESA800RD4 3 NFC-style fusible disconnects 25A through 125A2 UL general purpose AC23A rated operational power in kw Fuse amp rating 2V 400V 0V 690V type (lbs.) 3 pole 4 pole NFC 10x OS25FRF NFC 14x OS32RF NFC 14x OS63RF NFC 22x58 3. OS125RF NFC 27x60 3. OS160RF NFC 10x OS25FRF NFC 14x OS32RF NFC 14x51 3. OS63RF NFC 22x OS125RF NFC 27x OS160RF0427 Selecting the right fusible disconnect for HSF fuses may be difficult. Due to UL restrictions it is not possible to give a general fuse selection table for your use. Therefore we ask you to contact ABB Control Inc., Wichita Falls, regarding application issues. 1 OS32 OS160 include handle OHB65J6 and shaft OXP6X161. OESA2 OESA400 include handle OHB125J12 and shaft OXP12X2. OESA6 OESA800 include handle OHB145J12 and shaft OXP12X2. 2 OS25 OS125 include handle OHB65J6 and shaft OXP6X Consult factory. Discount schedule H4 [D4]:, A 100A Low Voltage Products & Systems Discount schedule H5 [D5]:, 0A 800A.31 Discount schedule H6 [DH]: Handles, shafts, accessories & lug kits

14 Other configurations BS fuse pattern 1 A 800A BS fuse pattern (A 32A) Handle and shaft included OS32B12A1 Rated op. current/ Fuse Fuse of poles Rated op. power type and standard 415V 690V size OSFB12A1 3 OSFB22A1N1 3 + non-fused neutral OSFB22A1F 4 OS32B12A1 3 OS32B22A1N1 3 + non-fused neutral OS32B22A1F 4 A A A1 10 kw 15 kw A 32 A 32A A1 15 kw 25 kw 32 A OS32B12A A 32A A2 OS32B22A2N1 3 + non-fused neutral 15 kw 25 kw 32 A OS32B12F A 32A F1 OS32B22F1N1 3 + non-fused neutral 15 kw 25 kw 32 A BS 88-2 IEC BS 88-6 O OFF O OS63B12 OS160 NO I I OS0B3 BS pattern (32A 800A) Handle and shaft included Fuse covers included for 0A 800A Rated Rated operational current/ opera- I th Rated operational power in with of poles tional (open) category AC23A, IEC947 [A/kW] pack voltage age AC23/[V] [A] 2V 400V 415V 0V 690V [kg] OS32B OS32B22N /7.5 32/11 32/15 32/ OS63B OS63B22N /15 63/ 63/ 63/ 401/ 1.6 OS100B OS100B / 100/55 100/55 100/70 1/ OS100B OS100B OS160B OS160B OS160B / 100/55 100/55 100/70 1/ OS160B OS0B OS0B /57 0/100 0/110 0/140 0/0 8.2 OS0B OS0B OS2B OS2B /70 2/132 2/140 2/170 2/2 8.2 OS315B OS315B OS315B /90 315/ / /2 315/ OS315B OS400B OS400B OS400B / / /2 400/ /3 6.3 OS400B OS6B OS6B /0 6/315 6/340 6/400 6/ OS6B OS6B OS800B3 3.0 OS800B /0 800/3 800/380 7/470 7/ 24.0 OS800B OS800B BS fuses are widely used in UK, South-Africa, Australia and Hong Kong 1 Please consult factory for additional information. 2 The fourth pole is provided with a solid link which can be replaced with a fuse..32 Discount schedule H4 [D4]:, A 100A Low Voltage Products & Systems Discount schedule H5 [D5]:, 0A 800A

15 Other configurations DIN fuse pattern 1 32A 800A DIN pattern (32A 800A) Handle and shaft included O OFF OS63D12 OS160 NO I OS2P3P Rated operational current/ Number Opera- Ith Rated operational power in with of poles tional (open) category AC23A, IEC947 [A/kW] package AC23/[V] [A] 2V 400V 415V 5V 690V [kg] OS32D OS32D22N1 3 + non-fused neutral /7.5 32/11 32/15 32/ OS32D22F OS63D OS63D22N1 3 + non-fused neutral /15 63/ 63/ 63/ 40/ 1.6 OS63D22F OS125D OS125D22N1 3 + non-fused neutral 1.8 OS125D22F / 100/55 100/55 100/70 / OS125D OS125D OS160D OS160D22N1 3 + non-fused neutral 1.8 OS160D22F / 100/55 100/55 100/70 / OS160D OS160D OS2D3P OS2D4P 3 + non-fused neutral 8.2 OS2DF4P /70 2/132 2/140 2/170 2/2 8.2 OS2D1P OS2D2P OS400D3P OS400D4P 3 + non-fused neutral 9.4 OS400DF4P / / /2 400/ /3 9.4 OS400D1P OS400D2P OS6D3P OS6D4P 3 + non-fused neutral 21.0 OS6DF4P /0 6/315 6/340 6/400 6/ OS6D1P OS6D2P OS800D3P 3.0 OS800D4P 3 + non-fused neutral 24.0 OS800DF4P /0 800/3 800/380 7/470 7/ 24.0 OS800D1P OS800D2P DIN fuses are mainly used in continental Europe (excluding France below 125A), Asia, Africa and South-America 1 Please consult factory for additional information. Low Voltage Products & Systems Discount schedule H4 [D4]:, A 100A.33 Discount schedule H5 [D5]:, 0A 800A

16 Other configurations NFC fuse pattern 63A 125A, 14x51 & 22x58 NFC fuse pattern (cylinder) (10x38) (14x51) Handle and shaft included OS32FF1214 of poles OS25FF OS25FF2210N1 3 + non-fused neutral OS25FF2210F 4 OS32FF OS32FF2214N1 3 + non-fused neutral OS32FF2214F 4 Rated operational current/ Fuse Fuse Rated operational power type and standard 415V 690V size 25 A 25A 10 x kw 22 kw 25 A IEC A 32A 14 x kw 25 kw 32 A IEC NFC fuse pattern (cylinder fuse links), (14x51 & 22x58) Handle and shaft included OS63F12 Rated opera- I th Rated operational power in with of poles tional (open) category AC23A, IEC947 [A/kW] pack voltage age AC23/[V] [A] 2V 400V 415V 5V 690V [kg] OSF /15 /25 /25 /33 / OSF22F /15 /25 /25 /33 / OS63F /.5 63/ 63/ 63/37 63/ OS63F22F /.5 63/ 63/ 63/37 63/ OS100F OS100F04F / 100/45 100/55 100/60 100/ OS100F04N1 3 + non-fuse N 2.8 OS125F OS125F04F /37 125/60 125/60 125/80 125/ OS125F04N1 3 + non-fuse N OS125F03 NFC fuses are used in France and in French speaking Africa 1 Please consult factory for additional information..34 Discount schedule H4 [D4]:, A 100A Low Voltage Products & Systems

17 Coming soon OS800 OS800 UL general purpose amp rating UL Fuse type V 2 Pole 3 Pole 4 Pole 800 L OS800L02 OS800L03 OS800L OS800L04F OS800L12 10 L OS10L02 OS10L03 OS10L04F T-Style handles for use with.47 x.47" (12x12mm) shafts 1 UL/NEMA Type IEC Type Color Marking Length Defeatable Padlockable 1, 3R, 12 IP65 Black O/I & Off/On 2 x 0 OHB0J12P Shafts for use with T-Style handles.47 x.47" (12x12mm) Terminal lugs Shaft length Maximum mounting depth (Lbs.) 11.0 / OXP12X / OXP12X / OXP12X395.3 / OXP12X / OXP12X535 Wire Wire Lugs per For use on size type kit OS10 (4) #2- kcmil Cu/Al 6 OZXA-10 (2) #2 - kcmil Cu/Al 6 OZXA-800 OS800 (2) - kcmil Cu/Al 3 OZXA-800/3 Auxiliary contacts Description For use on AC thermal AC rated amp rating voltage 1 NO OA1G10 1 NC OS OA3G01 Module for contacts OEA28 Availability to be Announced Low Voltage Products & Systems.35