EEDEN technical data. air conditioning systems FDQ-B8V3B9. Split Sky Air

Transcription

1 EEDEN08-00 technical data FDQ-B8V3B9 air conditioning systems Split Sky Air

2 Split - Sky Air Daikin s unique position as a manufacturer of air conditioning equipment, compressors and refrigerants has led to its close involvement in environmental issues. For several years Daikin has had the intention to become a leader in the provision of products that have limited impact on the environment. This challenge demands the eco design and development of a wide range of products and an energy management system, resulting in energy conservation and a reduction of waste. Het ISO400 assures an effective environmental management system in order to help protect human health and the environment from potential impact of our activities, products and services and to assist in maintaining and improving the quality of the environment. Daikin Europe N.V. is approved by LRQA for its Quality Management System in accordance with the ISO900 standard. ISO900 pertains to quality assurance regarding design, development, manufacturing as well as to services related to the product. The present publication is drawn up by way of information only and does not constitute an offer binding upon Daikin Europe N.V.. Daikin Europe N.V. has compiled the content of this publication to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, In the broadest sense, arising from or related to the use and/or interpretation of this publication. All content is copyrighted by Daikin Europe N.V.. Daikin units comply with the European regulations that guarantee the safety of the product. Naamloze Vennootschap Zandvoordestraat 300 B-8400 Ostend, Belgium BTW: BE RPR Oostende Daikin Europe N.V. participates in the Eurovent Certification Programme for Air Conditioners (AC), Liquid Chilling Packages (LCP) and Fan Coil Units (FC); the certified data of certified models are listed in the Eurovent Directory. EEDEN08-00 EEDEN /2008 Printed in Belgium by Goekint Graphics Copyright Daikin

3 EEDEN08-00 technical data FDQ-B8V3B9 air conditioning systems Split Sky Air

4 TABLE OF CONTENTS FDQ-B8V3B9 Features Specifications For indoor units only Technical Specifications Electrical Specifications Options Control systems Dimensional drawing & centre of gravity Dimensional drawing Piping diagram Wiring diagram Wiring diagram Sound data Sound pressure spectrum Sound power spectrum Fan characteristics Installation Installation method Split Sky Air Indoor Units 4

5 t i y n k 3 r 8t o 0 i o - ld 4 np - FI Features 9 BU S V a B Q D RS Slim design for flexible installation Ideal for use in larger areas Blends unobtrusively with any interior décor: only the suction and discharge grilles are visible Maximum external static pressure (ESP) ranges from 50 till 250Pa Optimum air distribution heat pump standard optional 2 steps: FDQ250, 3 steps: FDQ25,200 optional 5 Split Sky Air Indoor Units

6 2 Specifications 2- FOR INDOOR UNITS ONLY FDQ25B8V3B9 FDQ200B8V3B9 FDQ250B8V3B9 Nominal input (Indoor only) Cooling kw,340,340 Heating kw,340, TECHNICAL SPECIFICATIONS FDQ25B8V3B9 FDQ200B8V3B9 FDQ250B8V3B9 Casing Colour Non painted Material Galvanised steel Dimensions Packing Height mm Width mm,55 Depth mm 795,055,055 Unit Height mm Width mm,400 Depth mm Weight Unit kg Packed Unit kg Required Ceiling Void mm Heat Dimensions Length mm,50,200,200 Exchanger Nr of Rows Fin Pitch mm Nr of Passes Face Area m² Nr of Stages Tube type Hi-XSS (7) Hi-XSS (8) Hi-XSS (8) Fin Type Rhombus Non-symmetric fin Non-symmetric fin Treatment Hydrophilic Fan Type Sirocco fan Quantity Air Flow Rate Cooling Medium m³/min Heating Medium m³/min Fan Max High Pa Standard Pa Low Pa Motor Quantity Model DPA26-78NB DPC24-24NB DPC24-24NB Number of steps Output W ,000 (high) Drive Direct drive Cooling Sound Power Medium dba Sound Pressure High dba Heating Sound Pressure Low dba Refrigerant Type R-40A Piping Liquid (OD) Type Flare connection connections Diameter mm (OD) Gas Type Flare connection Braze connection Braze connection Diameter mm (OD) Drain Diameter mm (OD) Heat Insulation Both liquid and gas pipes Air Filter Resin net with mold resistance Air direction control Up and downwards Temperature control Microprocessor thermostat for cooling and heating Safety Devices Fan motor thermal fuse Standard Item Installation and operation manual Accessories Quantity 3 2 Split Sky Air Indoor Units 6

7 2 Specifications TECHNICAL SPECIFICATIONS FDQ25B8V3B9 FDQ200B8V3B9 FDQ250B8V3B9 Notes Sound values are measured in a semi-anechoic room with corrections The sound pressure level is measured via a microphone at m distance of the unit. Sound pressure level is a relative value, depending on the distance and acoustic environment. For more details, please refer to sound level drawings of this chapter. The sound power level is an absolute value indicating the power which a sound source generates. 2-3 ELECTRICAL SPECIFICATIONS FDQ25B8V3B9 FDQ200B8V3B9 FDQ250B8V3B9 Power Supply Name V3 Phase ~ Frequency Hz Voltage V Voltage range Minimum -0% Maximum +0% Power Supply Intake Both indoor and outdoor unit Notes FOR MORE DETAILS, REFER TO WIRING DIAGRAM, NAME PLATE AND INSTALLATION MANUAL 7 Split Sky Air Indoor Units

8 3 Options FDQ-B7V3B Name of option FDQ B7 Wiring adaptor for electrical appendices KRP4A5 Adapter for wiring (interlock for fresh air intake) KRPB54 Interface adapter for Sky Air series DTA2B5 Central remote control DCS302C5 unified ON/OFF control DCS30B5 Schedule timer DST30B5 Option PCB for electrical heater, humidifier and/or hour meter. * EKRPB2 Remote control Wired type BRCD527 Remote ON/OFF, forced OFF EKRORO 3 3 3TW22809-F * Electrical heater, humidifier and hour meter are field supply. These parts should not be installed inside the equipment. (Refer to installation manual EKRPB2). Split Sky Air Indoor Units 8

9 4 Control systems BRCD x 0 (Round end slit) 6.5x9(Roundendslit) Cover closed 5 x 7 (Round end slit) HoleJ5 Cover open 3TW Split Sky Air Indoor Units

10 5 Dimensional drawing & centre of gravity 5 - Dimensional drawing FDQ25B unit (mm) View A 3 5 View A j j2 j3 j4 j5 Power supply intake Drain connection J25 O.D. Gas pipe connection single union joint 5/8 or 5,9 mm Liquid pipe connection single union joint 3/8 or 9,52 mm Filter Notes: R : Service space 3TW FDQ B FDYP B unit (mm) View A View A j j2 j3 j4 j5 Power supply intake Drain connection J25 O.D. Gas pipe connection FDYP200B/250B : /8 O.D. or 28,6 mm FDQ200/250 :7/8 O.D. or 22,2 mm O.D. Liquid pipe connection FDYP200B : Single union joint /2 or 2.7mm FDYP250B : Single union joint 5/8 or 5.9mm FDQ200 : Single union joint 3/8 or 9,52 mm FDQ250 : Single union joint /2 or 2.7mm Filter Notes: R : Service space Model A B FDYP200B8V9/FDQ200B8V3B FDYP250B8V9/FDQ250B8V3B TW Split Sky Air Indoor Units 0

11 6 Piping diagram 6 FDQ25-250B Heat exchanger Cooling Heating Refrigerant flow Refrigerant pipe connection port diameters Model Gas Liquid FDQ25 J5.90 J9.52 FDQ200 J 22.2 FDQ250 J 2.7 Liquid pipe connection port Gas pipe connection port O Check valve L Flare connection M Screw connection N Flange connection Z Pinched pipe P Spinned pipe 3TW26055-A Split Sky Air Indoor Units

12 7 Wiring diagram 7 - Wiring diagram FDQ25-250B 3 Notes. When using the central remote control, see manual for connection to the unit. 2. Be sure that the power supply is switched off before opening the switch box. * L-tap is not available for 250 class. Outdoor Indoor Wired remote control 7 g Field wiring D Terminal a : Connector c : Wire clamp b : Protective earth (screw) Colours BLK: Black / BRN: brown / WHT: White RED: Red / BLU: Blue / GRY: Grey ORG: Orange / YLW: Yellow Details of wired remote control (optional accessory) Terminals for operation indicator Fan operation compressor operation Switch box Remote ON/OFF, forced OFF Adapter for wiring AP Printed circuit board A3P Printed circuit board TR Transformer(230V / 28V) CR Capacitor (fan) FT Thermal fuse (MF embedded) HAP Light emitting diode (service monitor green) KF Magnetic contactor (MF) MF Motor (Fan) RT R2T RyF SS XM RC TC F5U QDI Thermistor (air) Thermistor (coil) Magnetic relay (fan) Selector switch (emergency) Terminal strip Signal receiver circuit Signal transmission circuit Power setting fault Earth leakage breaker Wired remote control BS On/Off button BS2 Timer mode start/stop button BS3,BS8 Programming time button BS4 Temperature setting button up BS9 Temperature setting button down BS6 Operation mode selector button BS7 Timer on/off button BS2 Inspection/test operation button BS4 HP LCD SS Filter sign reset button Light emitting diode (service monitor red) Liquid crystal display Selector switch (main/sub) Adapter for wiring RyC,RyF Magnetic relay Connector for optional parts X60A Connector (interface adaptor for SKY AIR / X6A US series) X33A Connector (adapter for wiring) X35A Connector (group control adapter) X40A Connector (remote ON/OFF, forced off, only SKY-AIR Pàseries) 2TW26036-B Split Sky Air Indoor Units 2

13 8 Sound data 8 - Sound pressure spectrum FDQ200B 8 Sound pressure level (db) FDQ25B Legend Sound pressure level (db) High speed Low speed 3TW2287- NOTES Octave band center frequency (Hz) 3TW NOTES Octave band center frequency (Hz) Data is valid at free field condition 2 Data is valid at nominal operation condition (at 62 Pa ESP, 90m 3 /min) 3 db(a) = A-weighted sound pressure level (A-scale according to IEC) 4 Reference acoustic pressure 0dB = 20μPa 5 the indicated sound pressure is the casing radiated sound pressure. Data is valid at free field condition 2 Data is valid at nominal operation condition (50 Pa ESP, 72m 3 /min) 3 db(a) = A-weighted sound pressure level (A-scale according to IEC) 4 Reference acoustic pressure 0dB = 20Pa 5 the indicated sound pressure is the casing radiated sound pressure. Metalducts insulated inside Suction Unit discharge Microphone Location of microphone FDQ250B Sound pressure level (db) 3TW NOTES Octave band center frequency (Hz) Data is valid at free field condition 2 Data is valid at nominal operation condition (62 Pa ESP, 90m 3 /min) 3 db(a) = A-weighted sound pressure level (A-scale according to IEC) 4 Reference acoustic pressure 0dB = 20Pa 5 the indicated sound pressure is the casing radiated sound pressure. Metalducts insulated inside Suction Unit discharge Microphone Location of microphone 3 Split Sky Air Indoor Units

14 8 Sound data 8-2 Sound power spectrum FDQ25B FDQ200B 3 Sound operation level (db) Sound operation level (db) 8 3TW NOTES Octave band center frequency (Hz) 3TW NOTES Octave band center frequency (Hz) Data is valid at free field condition 2 Data is valid at nominal operation condition 3 dba A-weighted sound operation level. (A-scale according to IEC) 4 Reference acoustic pressure 0dB = 20Pa 5 Curve for FDQ25B in cooling mode Data is valid at free field condition 2 Data is valid at nominal operation condition 3 dba A-weighted sound operation level. (A-scale according to IEC) 4 Reference acoustic pressure 0dB = 20Pa 5 Curve for FDQ200B in cooling mode FDQ250B Sound operation level (db) 3TW NOTES Octave band center frequency (Hz) Data is valid at free field condition 2 Data is valid at nominal operation condition 3 dba A-weighted sound operation level. (A-scale according to IEC) 4 Reference acoustic pressure 0dB = 20Pa 5 Curve for FDQ250B in cooling mode Split Sky Air Indoor Units 4

15 9 Fan characteristics FDQ25B FDQ200B 9 low medium high low medium high 3TW TW2288- FDQ250B high medium 3TW Split Sky Air Indoor Units

16 0 Installation 0 - Installation method 3 0 Number Description Indoor unit 2 Outdoor unit 3 Remote control 4 Inlet air 5 Discharged air 6 Refrigerant piping, connection electric wire 7 Drain pipe Ground wire 8 Wire to ground from the outdoor unit to prevent electrical shocks. 9 Air filter Split Sky Air Indoor Units 6

17 0 Installation 0 - Installation method 0 7 Split Sky Air Indoor Units