technical data air conditioning systems FCQ-D MXS-E 4-way Blow Ceiling Mounted Cassette (edited) Split Sky Air

Transcription

1 technical data FCQ-D MXS-E 4-way Blow Ceiling Mounted Cassette Multi (950mm Split Heat x 950mm) Pump (edited) air conditioning systems Split Sky Air

2 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB Features V i 2 nye U_ k BS Mr V o ta oa D i d0- l t S p4u X RS OM Outdoor units for Multi model application. Up to 5 indoor units can be connected to Multi outdoor unit. All indoor units are individually controllable with remote control and do not need to be installed in the same room or at the same time. They operate simultaneously within the same cooling operation It is possible to combine different types of indoor units as well. (e.g. wall mounted, ceiling mounted cassette corner, concealed ceiling unit) Daikin outdoor units are neat and sturdy and can be mounted easily on a roof or terrace or simply placed against an outside wall. Outdoor units are fitted with a swing compressor, renowned for its low noise and high energy efficiency Split Sky Air Outdoor Units

3 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 2 Specifications 2- TECHNICAL SPECIFICATIONS 2MXS4 0DAVMB 2MXS52E2VB MXS52E2VB 4MXS68E2VB 4MXS80E7VB 5MXS90E7VB Casing Colour Ivory White Dimensions Unit Height mm Width mm Depth mm Packing Height mm Width mm Depth mm Weight Unit kg Heat Exchanger Packed Unit kg Dimensions Length mm Nr of Rows Fin Pitch mm Nr of Stages Tube type Hi-Xa(8) ø7.94 grooved tubes 24 ø7.94 grooved tubes 24 Hi-Xa(8) Hi-XSS(8) Hi-XSS(8) Fin Type WF fin Colgate fin Colgate fin WF fin WF fin WF fin Treatment Anti-corrosion treatment (PE) Anti-corrosion treatment (PE) Anti-corrosion treatment (PE) Fan Type Propeller Motor Anti-corrosion treatment (PE) Quantity Air Flow Rate (nominal at 20V) m³/min m³/min Motor Quantity Speed (nominal) Model D50E-28 KFD A KFD A KFD C KFD A KFD A rpm rpm Fan Motor Output W Compressor Quantity Operation Range Sound Level (nominal) Sound Level (Night quiet) Motor Model YC2GXD 2YC6BXD 2YC6BXD 2YC45BXD 2YC6BXD#C 2YC6BXD#C Type Motor Output Hermetically sealed swing compressor W Min CDB Max CDB Min CWB Max CWB Sound Power Sound Pressure Sound Pressure dba dba dba Sound Pressure dba 4 Refrigerant Type R-40A Charge kg Refrigerant Oil Type FVC50K Charged Volume l Split Sky Air Outdoor Units 2

4 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 2 Specifications 2 2- TECHNICAL SPECIFICATIONS 2MXS40DAVMB 2 MXS52E2VB MXS52E2VB 4MXS68E2VB 4MXS80E7VB 5MXS90E7VB Liquid (OD) Quantity Piping connections Standard Accessories Notes Diameter (OD) mm Gas Quantity Diameter (OD) mm Quantity 2 Diameter (OD) mm Quantity 2 2 Diameter (OD) mm Drain Quantity Diameter (OD) mm Piping Length Minimum m.5 (for one room) Additional Refrigerant Charge Installation height difference Max. internunit level difference Heat Insulation Item Maximum m 0 ( for total of each room), 20 (for one room) 50 (for total of each room)/25 (for one room) 50 (for total of each room)/ 25 (for one room) 60 (for total of each room)/ 25 (for one room) 70 (for total of each room)/ 25 (for one room) 75 (for total of each room)/ 25 (for one room) kg/m 0.02/> />0m 0.02/>0m 0.02/>0m 0.02/>0m 0.02/>0m Maximum m 5(between indoor unit and outdoor unit) m 7.5 (between indoor units) 5.0 (between indoor unit and outdoor unit) 7.5 (between indoor units) 5.0 (between indoor unit and outdoor unit) 7.5 (between indoor units) 5.0 (between indoor unit and outdoor unit) 7.5 (between indoor units) Both liquid and gas pipes Installation manual 5.0 (between indoor unit and outdoor unit) 7.5 (between indoor units) 5.0 (between indoor unit and outdoor unit) 7.5 (between indoor units) Quantity pc Item Screw bag Drain plug Drain plug Drain plug Drain plug Drain plug Quantity pc Item Reducer assembly Reducer assembly Reducer assembly Reducer assembly Quantity Reducer assembly Nominal cooling capacities are based on : indoor temperature : 270CDB, 90CWB, outdoor temperature : 50CDB, equivalent refrigerant piping : 7.5m, level difference : 0m. Nominal heating capacities are based on : indoor temperature : 200CDB, outdoor temperature : 70CDB, 60CWB, equivalent refrigerant piping : 7.5m, level difference : 0m Sound levels are measured in an anechoic room Sound pressure level is a relative value, depending on the distance and acoustic environment. For more details, please refer to sound level drawings of this chapter. The sound power level is an absolute value indicating the power which a sound source generates. 2-2 ELECTRICAL SPECIFICATIONS 2MXS40DAVMB 2 MXS52E2VB MXS52E2VB 4MXS68E2VB 4MXS80E7VB 5MXS90E7VB Power Supply Name VM V V V V V Current Phase Frequency Hz 50/ Voltage V / Voltage range Minimum V -0% -0% -0% -0% -0% Nominal running current (RLA) Maximum V +0% +0% +0% +0% +0% (A) (A) Starting current (cooling/ heating) A A A Z-max List No requirements Split Sky Air Outdoor Units

5 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 2 Specifications 2-2 ELECTRICAL SPECIFICATIONS 2MXS4 0DAVMB 2MXS52E2VB MXS52E2VB 4MXS68E2VB 4MXS80E7VB 5MXS90E7VB Wiring connections Power Supply Intake For Power Supply For connection with indoor Quantity 4 Quantity Outdoor unit only 2 Split Sky Air Outdoor Units 4

6 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 240V Indoor temp.: 27 CDB/9.0 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. 5 Split Sky Air Outdoor Units

7 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB MXS52E Model Units Power supply Comp. OFM H/P Outdoor Hz Volts Min. Max. MCA MFA MSC RLA W FLA C/D D MCA MFA MSC RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (See note 6). (A) : MSC means the max. current during the starting of compressor. (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Indoor temp.: 27 CDB/9.0 CWB Outdoor temp. : 5 CDB 2. Voltage range Units are suitable for use on electrical systems where voltage supplied to unit terminals is not below or above listed operation range limits. Maximum allowable voltage variation between phases is 2% 4. MCA represents maximum input current. MFA represents capacity which may accept MCA 5. Select wire size based on the larger value of MCA. 6. MFA is used to select the circuit breaker and the ground fault circuit interrupter (earth leakage circuit breaker) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. Split Sky Air Outdoor Units 6

8 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS68E (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA D B MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 20V Indoor temp.: 27 CDB/9.5 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. The above is the value for connecting with the following indoor units. 2.0, 2.5,.5kW class: wall mounted C series 5.0, 6.0kW class: wall mounted B series 6. Be sure to install an earth leak detector. (One that can handle higher harmonics.) (This unit uses an inverter, which means that it must be used an earth leak detector capable handling high harmonics in order to prevent malfunctioning of the earth leak detector.) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. 7 Split Sky Air Outdoor Units

9 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS68E (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA D B MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 20V Indoor temp.: 27 CDB/9.5 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. The above is the value for connecting with the following indoor units. 2.0, 2.5,.5kW class: wall mounted C series 5.0, 6.0kW class: wall mounted B series 6. Be sure to install an earth leak detector. (One that can handle higher harmonics.) (This unit uses an inverter, which means that it must be used an earth leak detector capable handling high harmonics in order to prevent malfunctioning of the earth leak detector.) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. Split Sky Air Outdoor Units 8

10 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS68E (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA D B MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 20V Indoor temp.: 27 CDB/9.5 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. The above is the value for connecting with the following indoor units. 2.0, 2.5,.5kW class: wall mounted C series 5.0, 6.0kW class: wall mounted B series 6. Be sure to install an earth leak detector. (One that can handle higher harmonics.) (This unit uses an inverter, which means that it must be used an earth leak detector capable handling high harmonics in order to prevent malfunctioning of the earth leak detector.) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. 9 Split Sky Air Outdoor Units

11 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS68E (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA D B MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 20V Indoor temp.: 27 CDB/9.5 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. The above is the value for connecting with the following indoor units. 2.0, 2.5,.5kW class: wall mounted C series 5.0, 6.0kW class: wall mounted B series 6. Be sure to install an earth leak detector. (One that can handle higher harmonics.) (This unit uses an inverter, which means that it must be used an earth leak detector capable handling high harmonics in order to prevent malfunctioning of the earth leak detector.) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. Split Sky Air Outdoor Units 0

12 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS68E (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA D05092-B MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 20V Indoor temp.: 27 CDB/9.5 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. The above is the value for connecting with the following indoor units. 2.0, 2.5,.5, 5.0kW class: wall mounted D series 6.0kW class: wall mounted B series 6. Be sure to install an earth leak detector. (One that can handle higher harmonics.) (This unit uses an inverter, which means that it must be used an earth leak detector capable handling high harmonics in order to prevent malfunctioning of the earth leak detector.) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. Split Sky Air Outdoor Units

13 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS68E (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA D B MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 20V Indoor temp.: 27 CDB/9.5 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. The above is the value for connecting with the following indoor units. 2.0, 2.5,.5, 5.0kW class: wall mounted D series 6.0kW class: wall mounted B series 6. Be sure to install an earth leak detector. (One that can handle higher harmonics.) (This unit uses an inverter, which means that it must be used an earth leak detector capable handling high harmonics in order to prevent malfunctioning of the earth leak detector.) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. Split Sky Air Outdoor Units 2

14 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS68E (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA D05092-B MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 20V Indoor temp.: 27 CDB/9.5 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. The above is the value for connecting with the following indoor units. 2.0, 2.5,.5, 5.0kW class: wall mounted D series 6.0kW class: wall mounted B series 6. Be sure to install an earth leak detector. (One that can handle higher harmonics.) (This unit uses an inverter, which means that it must be used an earth leak detector capable handling high harmonics in order to prevent malfunctioning of the earth leak detector.) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. Split Sky Air Outdoor Units

15 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS68E (50Hz 20V) Combination Units Power supply Comp. OFM IFM Hz Volts Min. Max. MCA MFA RLA W FLA W FLA D B MCA MFA RLA OFM IFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (A) : Rated Load Amps (A) : Outdoor Fan Motor : Indoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Power supply: 50Hz 20V Indoor temp.: 27 CDB/9.5 CWB Outdoor temp. : 5 CDB Indoor temp.: 20 CDB Outdoor temp.: 7 CDB/6 CWB 2. Maximum allowable voltage unbalance between phases is 2%. Select wire size based on the larger value of MCA. 4. Instead of fuse, use circuit breaker 5. The above is the value for connecting with the following indoor units. 2.0, 2.5,.5, 5.0kW class: wall mounted D series 6.0kW class: wall mounted B series 6. Be sure to install an earth leak detector. (One that can handle higher harmonics.) (This unit uses an inverter, which means that it must be used an earth leak detector capable handling high harmonics in order to prevent malfunctioning of the earth leak detector.) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. Split Sky Air Outdoor Units 4

16 Electrical data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS80E, 5MXS90E Model Units Power supply Comp. OFM H/P Outdoor Hz Volts Min. Max. MCA MFA MSC RLA W FLA C/D D05265 MCA MFA MSC RLA OFM FLA W SYMBOLS : Min. Circuit Amps (A) : Max. Fuse Amps (See note 6). (A) : MSC means the max. current during the starting of compressor. (A) : Rated Load Amps (A) : Outdoor Fan Motor : Full Load Amps (A) : Fan Motor Rated Output (W). RLA is based on the following conditions: Indoor temp.: 27 CDB/9.0 CWB Outdoor temp. : 5 CDB 2. Voltage range Units are suitable for use on electrical systems where voltage supplied to unit terminals is not below or above listed operation range limits. Maximum allowable voltage variation between phases is 2% 4. MCA represents maximum input current. MFA represents capacity which may accept MCA 5. Select wire size based on the larger value of MCA. 6. MFA is used to select the circuit breaker and the ground fault circuit interrupter (earth leakage circuit breaker) 7. For more details concerning conditional connections, see select E-Data Books. Finally, click on the document title of your choice. 5 Split Sky Air Outdoor Units

17 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4 Options 4MXS, 5MXS N Item 4MXS80E7 5MXS90E7 5MKS90E7 Drain plug KKPJ5F80 4TW Split Sky Air Outdoor Units 6

18 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 6 Dimensional drawing & centre of gravity 6 - Dimensional drawing 6 2MXS40D Drain outlet (I.D. J5.9 hose for connection) 4-cuts for anchor bolts Interconnecting piping and wiring inlet unit (mm) Outdoor air thermistor Brand name label 2-Terminal strip with earth terminal <room A> Liquid stop (J 6.4 Cut) Gas stop (J 9.5 Cut) Minimum space for air passage Wall height on air outlet side = less than 200 Name plate Service port In case of removing stop cover <room B> Liquid stop (J 6.4 Cut) Gas stop (J 9.5 Cut) D099A 2MXS52E unit (mm) 2-cuts for anchor bolts (M8 or M0) Minimum space for air passage Wall height on air outlet side = less than or more A 2- J 2 Hole Liquid J Drain outlet (M8 or M0) DIMENSIONS A Gas J H % (I.D. J5.9 hose for connection) H > Name plate -Terminal strip -Earth terminal Interconnecting piping and wiring inlet Outdoor air thermistor Installation space for discharge side (mm) <room A> (J2.7 single union) <room B> (J2.7 single union) Liquid stop Service port Gas stop D Split Sky Air Outdoor Units

19 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 6 Dimensional drawing & centre of gravity 6 - Dimensional drawing MXS52E unit (mm) 2-cuts for anchor bolts (M8 or M0) Minimum space for air passage Wall height on air outlet side = less than or more 6 Drain outlet (I.D. J5.9 hose for connection) 2- J 2 Hole (M8 or M0) A Liquid J Gas J J DIMENSIONS A H % H > Installation space for discharge side (mm) Name plate 4-Terminal strip 4-Earth terminal Interconnecting piping and wiring inlet Outdoor air thermistor <room A> (J9.5 single union) <room B> (J9.5 single union) <room C> (J2.7 single union) Liquid stop Service port Gas stop D0579 4MXS68E 4-cuts for anchor bolts (M8 or M0) <room A> (J9.5 single union) <room B> (J9.5 single union) Minimum space for air passage Wall height on air outlet side = less than 200 unit (mm) Drain outlet (I.D. J 5.9 hose for connection) 5-Terminal strip with earth terminal <room C> (J2.7 single union) <room D> (J5.9 single union) Name plate Interconnecting piping and wiring inlet Outdoor air thermistor A Liquid J Gas J J Liquid stop Service port Gas stop D0472G Split Sky Air Outdoor Units 90

20 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 6 Dimensional drawing & centre of gravity 6 - Dimensional drawing 4MXS80E Minimum space for air passage unit (mm) 6 4-cuts for anchor bolts Wall height on air outlet side = less than 200 Drain outlet I.D. J 25 hose for connection Name plate Gas stop 5-Terminal strip with earth terminal Liquid stop Outdoor air thermistor A J J J J Interconnecting piping and wiring inlet <room A> (J9.5 single union) <room B> (J2.7 single union) <room C> (J5.9 single union) <room D> (J5.9 single union) D MXS90E unit (mm) 4-cuts for anchor bolts Minimum space for air passage Wall height on air outlet side = less than 200 Drain outlet I.D. J 25 hose for connection Name plate Gas stop 6-Terminal strip with earth terminal Liquid stop Outdoor air thermistor <room A> (J9.5 single union) <room B> (J9.5 single union) <room C> (J2.7 single union) A Liquid J J Gas J J Interconnecting piping and wiring inlet <room D> (J5.9 single union) <room E> (J5.9 single union) D05948A 9 Split Sky Air Outdoor Units

21 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 6 Dimensional drawing & centre of gravity 6-2 Centre of gravity 2MXS40D 6 Anchor bolt 4D04069A 2MXS52E, MXS52E, 4MXS68E Anchor bolt 4D07024H Split Sky Air Outdoor Units 92

22 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 6 Dimensional drawing & centre of gravity 6-2 Centre of gravity 4MXS80E, 5MXS90E 6 Anchor bolt 4D Split Sky Air Outdoor Units

23 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 7 Piping diagram 2MXS40D Outdoor unit Branch pipe Heat exchanger Outdoor temperature thermistor (DOA) Liquid receiver Distributor Liquid receiver Motor operated Motor operated thermistor (DLA) thermistor (DLB) Liquid line stop Liquid line stop (6.4 CuT) (6.4 CuT) Field piping liquid 7 Heat exchanger thermistor(de) Fan motor Propeller fan Reversing solenoid Branch pipe Muffler Muffler (DGA) (DGB) Gas line stop Gas line stop (9.5 CuT) (9.5 CuT) Field piping gas Discharge pipe thermistor (DO) Muffler Muffler Refrigerant flow Compressor Accumulator D0992A 2MXS52E Outdoor unit Header Heat exchanger thermistor (DE) Heat exchanger Outdoor temperature thermistor (DOA) Distributor Header Electronic expansion Electronic expansion thermistor (DLA) thermistor (DLB) Field piping liquid (Liquid side) DC fan motor Capillary tube Liquid line stop Propeller fan Reversing solenoid Header (DGA) Muffler Discharge pipe thermistor (DO) Muffler Muffler (DGB) Field piping gas (Gas side) Refrigerant flow Compressor Accumulator Gas line stop D Split Sky Air Outdoor Units 94

24 7 Piping diagram Outdoor Units R40A MXS-DAVMB_E2VB_E7VB MXS52E Outdoor unit 7 Header Heat exchanger Outdoor temperature thermistor (DOA) Header Electronic expansion Electronic expansion thermistor (DLA) thermistor (DLB) Heat exchanger thermistor (DE) DC fan motor Capillary tube Distributor Liquid line stop Electronic expansion thermistor (DLC) Field piping liquid (Liquid side) Propeller fan Header Reversing solenoid (DGA) Refrigerant flow Muffler Discharge pipe thermistor (DO) Compressor Accumulator Muffler Muffler Gas line stop (DGB) (DGC) Field piping gas (Gas side) D MXS68E Outdoor unit Header Heat exchanger thermistor (DE) DC fan motor Heat exchanger Outdoor temperature thermistor (DOA) Capillary tube Distributor Defrost solenoid Header Liquid line stop Electronic expansion thermistor (DLA) Electronic expansion thermistor (DLB) Electronic expansion thermistor (DLC) Electronic expansion thermistor (DLD) Field piping liquid (Liquid side) Propeller fan Refrigerant flow Reversing solenoid Muffler Discharge pipe thermistor (DO) Compressor Accumulator Accumulator Header Gas line stop (DGA) (DGB) (DGC) (DGD) Field piping gas (Gas side) D045G 95 Split Sky Air Outdoor Units

25 7 Piping diagram Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS80E Outdoor unit Header Heat exchanger Outdoor temperature thermistor Receiver Header Motor operated (A) thermistor (Room-A) Motor operated (B) thermistor (Room-B) 7 Heat exchanger thermistor (Condenser) Motor operated (C) thermistor (Room-C) Field piping liquid Motor operated (D) thermistor (Room-D) Room D DC fan motor Capillary tube Distributor Liquid line stop Motor operated (E) Propeller fan 4-way Header (Room-A) (Room-B) Refrigerant flow Muffler Discharge pipe thermistor Compressor Accumulator Accumulator Gas line stop Muffler Muffler (Room-C) (Room-D) Room D Field piping gas D0597B 5MXS90E Outdoor unit Header Heat exchanger Outdoor temperature thermistor Receiver Header Motor operated (A) thermistor (Room-A) Motor operated (B) thermistor (Room-B) Heat exchanger thermistor (Condenser) Motor operated (C) thermistor (Room-C) Field piping liquid Motor operated (D) thermistor (Room-D) Room D DC fan motor Distributor Motor operated (E) Capillary tube Liquid line stop thermistor (Room-E) Room E Propeller fan 4-way Header (Room-A) (Room-B) Muffler Discharge pipe thermistor (Room-C) (Room-D) Room D Field piping gas Refrigerant flow Compressor Accumulator Accumulator Gas line stop Muffler Muffler (Room-E) Room E D0596A Split Sky Air Outdoor Units 96

26 8 Wiring diagram 8 - Wiring diagram 2MXS40D Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 8 Indoor Power supply 50Hz V 60Hz V g Field wiring Outdoor () () () () (outdoor) (discharge) (condenser) () () Colours BLK: Black / BRN: Brown / WHT: White / RED: Red / BLU: Blue / GRY: Grey / ORG: Orange / YLW: Yellow C5 C8, SHC CT DB, DB FU FU L L LR MC MF MRCW, MRM0, MRM20 N : Capacitor : Current transformer : Diode bridge : Fuse : Live : Coil : Reactor : Compressor motor : Fan motor : Magnetic relay : Neutral OIS : Solid state relay PCB, PCB2 : Printed circuit board QL : Overload protector RT R8T : Thermistor SA : Surge arrester TFU : Thermal fuse TRM : Transistor module V, V2, V : Varistor XM, X2M : Terminal strip YE, Y2E : Electronic expansion coil YR : Reversing solenoide coil ZC : Ferrite core R : Protective earth S0 S2, S20, S2, S0 S40, S45, S70, S80, S90 S92, HL, HL2, HN, HN2, HR, HR4, AC, AC2, HC, HC4, E, X0A : Connector D09565A 2MXS52E Power supply To indoor unit Sheet metal Indoor g Field wiring (outdoor) (discharge) () () () () (condenser) () () Outdoor ZC ZC : Ferrite core XM XM : Terminal strip YE YE : Electronic expansion coil V2,V,V5,V6,V : Varistor SA2 : Surge arrester FU, FU2, FU : Fuse AC, AC2 U, V, W, XA E, E2 HR, HR2 : Connector MRM0, MRM20 MRC/W : Magnetic relay RT R5T R8T, R9T S2 S02 LED LED4 LEDA L N SW S2W SW S4W S5W : Thermistor : Connector : Pilot lamp : Live : Neutral : Forced operation on/off switch (SW) : Select SW (SW2) : Wiring error check SW (SW) : Priority room setting SW (SW4) : Night quiet mode setting SW (SW5) MC MF LR QL PM PCB, 2 YR Sheet metal : Compressor motor : Fan motor : Reactor : Overload protector : Power module : Printed circuit board : Reversing solenoid : Terminal strip fixed plate D Split Sky Air Outdoor Units

27 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 8 Wiring diagram 8 - Wiring diagram MXS52E Power supply 8 To indoor unit Sheet metal Indoor (discharge) () () (outdoor) () () (condenser) () () g Field wiring Outdoor () () ZC ZC : Ferrite core XM X4M : Terminal strip YE YE : Electronic expansion coil V2,V,V5,V6,V : Varistor SA2 : Surge arrester FU, FU2, FU : Fuse AC, AC2 U, V, W, XA E, E2 HR, HR2 : Connector MRM0, MRM20 MRC/W : Magnetic relay RT R6T R8T R0T S2 S02 LED LED4 LEDA L N SW S2W SW S4W S5W : Thermistor : Connector : Pilot lamp : Live : Neutral : Forced operation on/off switch (SW) : Select SW (SW2) : Wiring error check SW (SW) : Priority room setting SW (SW4) : Night quiet mode setting SW (SW5) MC MF LR QL PM PCB, 2 YR Sheet metal : Compressor motor : Fan motor : Reactor : Overload protector : Power module : Printed circuit board : Reversing solenoid : Terminal strip fixed plate D0502-4MXS68E g Field wiring To indoor unit Room D (outdoor) (discharge) () () () () (condenser) () (Room D) () (Room D) () () ZC ZC : Ferrite core XM X5M : Terminal strip YE Y4E : Electronic expansion coil V2 V5 : Varistor FU, FU2, FU20 : Fuse HE, HL, HN E, AC, AC2 H, H2, L L2 : Connector MRM0, MRM20 MRB, MRD MRC/W : Magnetic relay RT R2T S2 S02 HP H5P L N SW S2W SW S4W S5W SA YR : Thermistor : Connector : Pilot lamp : Live : Neutral : Forced operation on/off switch (SW) : Select SW (SW2) : Wiring error check SW (SW) : Priority room setting SW (SW4) : Night quiet mode setting SW (SW5) : Surge arrester : Reversing solenoid YS PCB DB MC MF LR QL CT MID MID2 SPM : Defrost solenoid coil : Printed circuit board : Diode bridge : Compressor motor : Fan motor : Reactor : Overload protector : Current transformer : Molded interconnect device : System power module D042J Split Sky Air Outdoor Units 98

28 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 8 8 Wiring diagram 8 - Wiring diagram 4MXS80E BLK: Black BRN: brown WHT: White RED: Red BLU: Blue GRY: Grey ORG: Orange YLW: Yellow GRN: Green To indoor unit Room D Sheet metal Outdoor Condenser Discharge Room D Room D Indoor Outdoor L: Live, N: Neutral, : Field wiring : Terminal strip : Connector : Connection : Protective earth (screw) : Relay connector : Terminal ZC Z6C XM X5M YE Y4E V2,V,V5 V9,V00 SA2 FU, FU2, FU AC,AC2 U,V,W,XA E,E2E HR,HR2 MRM0, MRM20 MRC/W : Ferrite core : Terminal strip : Electronic expansion coil : Varistor : Surge arrester : Fuse : Connector : Magnetic relay RT RT R4T R7T R8T RT S2 S02 LED LED4 LEDA SW SW2 SW SW4 SW5 MC MF LR : Thermistor : Connector : Light emitting diode : Forced operation on/off switch (SW) : Operation mode sellect SW (SW2) : Wiring error check SW (SW) : Priority room setting SW (SW4) : Night quiet mode setting SW (SW5) : Compressor motor : Fan motor : Reactor QL PM PCB,2 YR Sheet metal F2U QDI : Overload protector : Power module : Printed circuit board : Four way coil : Terminal strip fixed plate : Field fuse : Field earth leakage breaker (00mA) 2TW MXS90E BLK: Black BRN: brown WHT: White RED: Red BLU: Blue GRY: Grey ORG: Orange YLW: Yellow GRN: Green To indoor unit Room D Room E Outdoor Condenser Discharge Room D Room E Room D Room E Indoor Sheet metal Outdoor L: Live, N: Neutral, : Field wiring : Terminal strip : Connector : Connection : Protective earth (screw) : Relay connector : Terminal ZC Z6C : Ferrite core XM X6M : Terminal strip YE Y5E : Electronic expansion coil V2,V,V5 V9,V00 : Varistor SA2 : Surge arrester FU, FU2, FU : Fuse AC,AC2 U,V,W,XA E,E2E HR,HR2 H, H2, L, L2 : Connector MRM0, MRM20 MRC/W : Magnetic relay RT RT R4T R8T R9T RT S2 S02 LED LED5 LEDA SW SW2 SW SW4 SW5 MC MF LR : Thermistor : Connector : Light emitting diode : Forced operation on/off switch (SW) : Operation mode sellect SW (SW2) : Wiring error check SW (SW) : Priority room setting SW (SW4) : Night quiet mode setting SW (SW5) : Compressor motor : Fan motor : Reactor QL PM PCB,2 YR Sheet metal F2U QDI : Overload protector : Power module : Printed circuit board : Four way coil : Terminal strip fixed plate : Field fuse : Field earth leakage breaker (00mA) 2TW Split Sky Air Outdoor Units

29 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 9 Sound data 9 - Sound pressure spectrum 2MXS40D () 2MXS40D () 9 Octave band sound pressure level db:(0db = µ bar) Octave band sound pressure level db:(0db = µ bar) approximate threshold hearing for continuous noise D04067A Legend Octave band center frequency (Hz) Operation sound is measured in an anechoic chamber. 2 Operation sound level differs with operation and ambient conditions. Reference acoustic pressure 0dB = 20µPa 50/60Hz, /220-20V D04067A approximate threshold hearing for continuous noise Operation sound is measured in an anechoic chamber. 2 Operation sound level differs with operation and ambient conditions. Reference acoustic pressure 0dB = 20µPa Legend Octave band center frequency (Hz) 50/60Hz, /220-20V 4MXS68E () 4MXS68E () Octave band sound pressure level db:(0db = µ bar) Octave band sound pressure level db:(0db = µ bar) approximate threshold hearing for continuous noise approximate threshold hearing for continuous noise D04807F Octave band center frequency (Hz) D04807F Octave band center frequency (Hz) Operation sound is measured in an anechoic chamber. 2 Operation sound level differs with operation and ambient conditions. The operation noise measuring method is in accordance with JISC962 Operation sound is measured in an anechoic chamber. 2 Operation sound level differs with operation and ambient conditions. The operation noise measuring method is in accordance with JISC962 Split Sky Air Outdoor Units 400

30 Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 9 Sound data 9 - Sound pressure spectrum 4MXS80E () 4MXS80E () 9 Octave band sound pressure level db:(0db = µ bar) Octave band sound pressure level db:(0db = µ bar) approximate threshold hearing for continuous noise approximate threshold hearing for continuous noise D0520 Octave band center frequency (Hz) D0520 Octave band center frequency (Hz) Operation sound is measured in an anechoic chamber. 2 Operation sound level differs with operation and ambient conditions. The operation noise measuring method is in accordance with JISC962 Operation sound is measured in an anechoic chamber. 2 Operation sound level differs with operation and ambient conditions. The operation noise measuring method is in accordance with JISC962 5MXS90E () 5MXS90E () Octave band sound pressure level db:(0db = µ bar) Octave band sound pressure level db:(0db = µ bar) approximate threshold hearing for continuous noise approximate threshold hearing for continuous noise D05202 Octave band center frequency (Hz) Operation sound is measured in an anechoic chamber. 2 Operation sound level differs with operation and ambient conditions. The operation noise measuring method is in accordance with JISC962 D05202 Octave band center frequency (Hz) Operation sound is measured in an anechoic chamber. 2 Operation sound level differs with operation and ambient conditions. The operation noise measuring method is in accordance with JISC Split Sky Air Outdoor Units

31 9 Sound data Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 9-2 Sound power spectrum 4MXS80E Octave band sound pressure level db:(0db = µ bar) 5MXS90E Sound power level(db) 9 TW Octave band center frequency (Hz) db(a) = A-weighted sound power level (A-scale according to IEC) 2 Reference acoustic intensity 0dB = 0E-6 µw/m 2 Measured according to ISO 744 TW Octave band center frequency (Hz) dba = A-weighted sound power level (A-scale according to IEC) 2 Refernece acoustic intensity 0dB = 0E-6µW/m_ Measured according to ISO 744 Split Sky Air Outdoor Units 402

32 0 Operation range Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 2MXS40D 0 (50 / 60 Hz) Outdoor temperature ( CDB) Continuous operation Pull-down period Outdoor temperature ( CWB) Continuous operation Indoor temp. ( CWB) Indoor temp. ( CDB) Notes: The graphs are based on the following conditions: d Equivalent piping length 7.5m d Level difference 0m d Air flow rate Hi speed D04065A 2MXS52E, MXS52E, 4MXS68E (50 / 60 Hz) Outdoor temperature ( CDB) Continuous operation Pull-down period Outdoor temperature ( CWB) Continuous operation Indoor temp. ( CWB) Notes: Indoor temp. ( CDB) The graphs are based on the following conditions: d Equivalent piping length 7.5m d Level difference 0m d Air flow rate Hi speed D04956H 40 Split Sky Air Outdoor Units

33 0 Operation range Outdoor Units R40A MXS-DAVMB_E2VB_E7VB 4MXS80E, 5MXS90E (50 / 60 Hz) 0 Outdoor temperature ( CDB) Continuous operation Pull-down period Outdoor temperature ( CWB) Continuous operation Indoor temp. ( CWB) Indoor temp. ( CDB) Notes: The graphs are based on the following conditions: d Equivalent piping length 7.5m d Level difference 0m d Air flow rate Hi speed D05204 Split Sky Air Outdoor Units 404

34 0 Operation range Outdoor Units R40A MXS-DAVMB_E2VB_E7VB Split Sky Air Outdoor Units