PB-RT-FRONT-P RT / RTX SERIES FRONT UNLOAD RT616 RT618 RT620 RT622 / RTX620 RTX622 RTX624 RTX MODEL YEAR AND LATER.

Transcription

1 PB-RT-FRONT-P RT / RTX SERIES FRONT UNLOAD RT616 RT618 RT620 RT622 / RTX620 RTX622 RTX62 RTX MODEL YEAR AND LATER Parts Book 5 / (1-1) Printed in U.S.A. Bobcat Company 201

2 IMPORTANT INFORMATION Prior to 2016 model year, the serial number plate is located to the right of the control handles as well as stamped above the discharge opening on the unit discharge end frame. For 2016 model year and later, the serial number plate is located above the discharge opening on the unit discharge end frame. Please enter the model, serial number and additional information in the space provided for future reference. Model No. Serial No. Date of Purchase Dealership Prior to 2016 Model Year Serial Number Plate Dealership Phone No. Model Year 2016 and Later Serial Number Plate Always use your serial number when requesting information or when ordering parts. HOW TO READ YOUR SERIAL NUMBER EXAMPLE: 15R6201 Model Year / TSS / Model / Sequence Of Build Prior to 2016 Model Year Serial Number 15 R Meyer Manufacturing Corporation 67 W. Business Cty Rd A Dorchester, WI 525 Phone: Fax: sales@meyermfg.com Website: Over 70 years of service to our customers Meyer Manufacturing Corporation RT / RTX SERIES

3 TABLE OF CONTENTS IMPORTANT INFORMATION REPLACEMENT PARTS Shutoff & Lockout Power Recommendations MANUFACTURER S WARRANTY RT / RTX SERIES UNIT FRAME CROSS CONVEYOR VARIABLE SPEED CLUSTER DRIVE SHIFTER CONTROLS INDEPENDENT OUTFEED CLUTCH DRIVE INDEPENDENT OUTFEED CLUTCH AUGERS AND AUGER DRIVE MAIN APRON DRIVE SYSTEM MAIN FRAME 2015 MODEL YEAR AND LATER ROOF ASSEMBLY REAR STATIONARY GATE HIGHWAY LIGHT PACKAGE KIT AUGER GEARBOX FRONT APRON GEARBOX R UNIVERSAL JOINT TELESCOPING ASSEMBLY WITH GUARD STEEL STRINGER TIE DOWN KIT OPTIONAL EQUIPMENT RT-CE-1K, RT-CE-2K, RT-CE-K 2", 6", 8" CHAIN CROSS CONVEYOR EXTENSION KIT HYDRAULIC FRONT DRIVE HYDRAULIC FRONT DRIVE TRUCK MOUNT MAINTENANCE RECORD RT / RTX SERIES - -

4 Meyer Manufacturing Corporation - - RT / RTX SERIES

5 REPLACEMENT PARTS Before servicing this equipment, ensure that all personnel, including family members are familiar with the equipment and the safety hazards that are present, along with the safety practices that should be observed while working in this equipment. Inspect the chassis axles, o-beams, spindles, tires, hitches and all safety shielding, safety signs and safety lighting regularly. These parts if not watched closely, could pose potential injury or death. If any part is found in need of repair, follow the SHUTOFF & LOCKOUT POWER recommendations and have qualified personnel repair immediately. Any individual that will be adjusting, servicing, maintaining, or clearing an obstruction from this machine needs to ensure that this machine stays safely OFF until the adjustment, service, or maintenance has been completed, or when the obstruction has been cleared, and that all guards, shields, and covers have been restored to their original position. The safety of all individuals working on or around this machine, including family members, are affected. The following procedure will be referred to throughout this manual, so be familiar with the following steps. Shutoff & Lockout Power Recommendations 1. Think, Plan and Check a. Think through the entire procedure and identify all the steps that are required. b. Plan what personnel will be involved, what needs to be shut down, what guards / shields need to be removed, and how the equipment will be restarted. c. Check the machine over to verify all power sources and stored energy have been identified including engines, hydraulic and pneumatic systems, springs and accumulators, and suspended loads. 2. Communicate - Inform everyone involved, including those working on or around this machine, that work is being done which involves keeping this machine safely OFF.. Power Sources a. LOCKOUT - Shut off engines and take the key, or physically lock the start/on switch or control. Disconnect any power sources which are meant to be disconnected (i.e. electrical, hydraulic, and PTO of pull-type units). b. TAGOUT - Place a tag on the machine noting the reason for the power source being tagged out and what work is being done. This is particularly important if the power source is not within your sight and/or will need to be isolated for a longer period of time.. Stored Energy - Neutralize all stored energy from its power source. Ensure that this machine is level, set the parking brake, and chock the wheels. Disconnect electricity, block moveable parts, release or block spring energy, release pressure from hydraulic and pneumatic lines, and lower suspended parts to a resting position. 5. Test - Do a complete test and personally double check all of the above steps to verify that all of the power sources are actually disconnected and locked out. 6. Restore Power - When the work has been completed, follow the same basic procedures, ensuring that all individuals working on or around this machine are safely clear of the machine before locks and tags are removed and power is restored RT / RTX SERIES

6 It is important that everyone who works on this equipment is properly trained to help ensure that they are familiar with this procedure and that they follow the steps outlined above. This manual will remind you when to Shutoff & Lockout Power. At times, parts on this implement will become worn or damaged. Performing repairs on this implement can pose a risk of injury including death. To reduce risk, the party that will be doing the repair should be very knowledgeable of the implement and the equipment that they will be using to do the repair. Review the repair so that a plan can be put together and the proper equipment can be used to repair this implement safely and correctly. Personal safety equipment may include items such as safety glasses, protective footwear, hearing protection, gloves, fire retardant clothes, etc. Crushing Hazard Do Not work under suspended or blocked parts. The use of hoists and/or supports may be needed to handle heavy components. If the implement is being repaired in the field, make sure the parking brake of the tractor is engaged, the implement is on solid and level ground. Welding and torching should be done by properly trained individuals who have proven their skills. Call the factory for any additional details you may need to perform the repair. Some parts may come with instruction sheets to assist in the repair. Instructions sheets may be provided with your parts order. Otherwise, if available, instruction sheets can be ed or faxed for you convenience. Call Meyer Manufacturing Corporation toll free at or sales@meyermfg.com. NOTE: Be environmentally friendly and dispose of any waste materials properly. Recycle when appropriate. Meyer Manufacturing Corporation RT / RTX SERIES

7 MANUFACTURER S WARRANTY MEYER RT FORAGE BOX 2/2015 I. The Owner's Registration Form must be completed in full and promptly returned to Meyer Mfg. Corp. for this warranty to become both valid and effective. All warranties on new Meyer forage boxes shall apply only to the original retail customer from an authorized Meyer Mfg. Corp. dealership. II. III. This warranty shall not apply to any Meyer forage box which has been subjected to misuse, negligence, alteration, accident, incorrect operating procedures, has been used for an application not designed for or pre-authorized by Meyer in writing, has had the serial numbers altered, or which shall have been repaired with parts other than those obtained through Meyer Mfg. Corp. Meyer is not responsible for the following: Depreciation or damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow the operator's manual recommendations or normal maintenance parts and service. Meyer is not responsible for rental of replacement equipment during warranty repairs, damage to a power unit (including but not limited to a truck or tractor), loss of earnings due to equipment down time, or damage to equipment while in transit to or from the factory or dealer. Meyer Mfg. Corp. warrants new Meyer forage box to be free from defects in material and workmanship under recommended use and maintenance service, as stated in the Owner / Operator's Manual & Parts Book, as follows: A. Meyer Mfg. Corp. will repair or replace F.O.B. Dorchester, WI, as Meyer Mfg. Corp. elects, any part of a new Meyer Forage Box which is defective in material or workmanship: i. Without charge for either parts or labor during the first (1) year from purchase date to the original retail customer. ii. Without charge for parts only during the second (2) year from purchase date to the original retail customer. IV. COMMERCIAL USE: Coverage as in paragraph III.A.i. ONLY, except warranty coverage is for (90) days for parts and labor to the original commercial retail customer. V. Repairs eligible for labor warranty must be made by Meyer Mfg. Corp. or an authorized Meyer dealership. The original retail customer is responsible for the transportation of the forage box to the dealership for warranty service or for any service call expenses. VI. VII. VIII. Except as stated above, Meyer Mfg. Corp. shall not be liable for injuries or damages of any kind or nature, direct, consequential, or contingent, to persons or property. This warranty does not extend to loss of crop or for any other reasons. No person is authorized to give any warranties or to assume any other obligation on Meyer Mfg. Corp.'s behalf unless made or assumed in writing by Meyer Mfg. Corp. This warranty is the sole and exclusive warranty which is applicable in connection with the manufacture and sale of this product and Meyer Mfg. Corp's responsibility is limited accordingly. Tires, optional scales and tarps fall under the original manufacturer's warranty RT / RTX SERIES

8 Meyer Manufacturing Corporation RT / RTX SERIES

9 RT / RTX SERIES RT / RTX SERIES

10 UNIT FRAME Meyer Manufacturing Corporation RT / RTX SERIES

11 KEY PART NUMBER QTY DESCRIPTION AS 1 Apron Pan AS 1 Left Upper Auger Panel Assembly (Prior to SN 15R6210) Left Upper Auger Panel Assembly (SN 15R6210 & Later) AS 1 Right Upper Auger Panel Assembly (Prior to SN 15R6210) Right Upper Auger Panel Assembly (SN 15R6210 & Later) Reverse Chain Guide Panel Rear Apron Pan Belt Right Cross Conveyor Hold Down Rear Cross Conveyor Hold Down Front Cross Conveyor Chain Idler Shaft Cap Left Cross Conveyor Shaft Shield Top Apron Pan Spillage Guard Gusset Left Spillage Guard Gusset Right RTX600C 1 Upper Spillage Guard Panel Assembly Left End Frame Welded Assembly Auger Shield Left Apron Pan Bracket PTO Hanger Bracket 18 See Page 12 1 Right Apron Pan Support Bracket Conveyor Chain Return Right End Frame Welded Assembly Clean-Out Door Weldment Front Shield Bracket Right Front Shield Bracket Center 2 See Page 20 1 Independent Out-Feed Clutch Main Clutch Plate Weldment Clutch PTO Shaft Cover Independent Out-Feed Clutch Bottom Bracket Front Shield End Cap Weldment Right Front Shield Assembly PTO Shield Left Hand Assembly Cross Conveyor Access Cover Rear Cross Conveyor Access Cover Front Front Shield Top Front Shield Assembly With Door Latches Door Latch Front Shield Hinge Rear Apron Pan Belt Left Front Shield Mount Inner Bracket Left Auger Extension Plate (High Side Box) Right Auger Extension Plate (High Side Box) Hydraulic Extension Cover Plate RT / RTX SERIES

12 CROSS CONVEYOR Meyer Manufacturing Corporation RT / RTX SERIES

13 KEY PART NUMBER QTY DESCRIPTION B B2 1-1/ Bore, 5/16 Keyway Sprocket With 2-5/16 Setscrews Auger Chain Tightener Bracket " Nylon Slide Chain Tightener Paddle Torsion Spring Chain Tightener Spring Independent Out-feed Clutch Chain Tightener Mount Bracket B Tooth 1.66 Pitch 662 Sprocket 1.25 ID x Key /8-16 x 1/2 Set Screw Knurled Point H 1 5/16 x 5/16 x 1-1/ Through Hardened /16 x 5/16 x 2 Square Key With Square Ends Right Cross Conveyor Drive Shaft Right Apron Pan Support Bracket / Re-Lube Plain Round Flange G 1-1/ Bearing With Lock Collar Greasable / Re-Lube Plain Flange, 90 Degree Threaded Zerk / Bearing Assembly, -Hole Re-Lube RD Flanges, 90 Degree Zerk G 1-1/ Re-Lube Plain Flange, Straight Press-in Zerk / Bearing Assembly, -Hole Re-Lube Flanges, Straight Zerk 18 See Page 10 1 Apron Pan Left Cross Conveyor Idler Shaft Z 1/2 Spin Lock Nut Tightener Bearing Bracket Z 2 1/2-1 x Tap Bolt Grade 5 Zinc Fully Threaded Tightener Bearing Assembly D 1 Regular Pintle Chain Assembly Complete D 1 Extension Pintle Chain Assembly Complete For 1 Extension (Additional Lengths See Page 6) D 1 Cross Apron Slat With Attachments AR Link, Pintle Chain (With Two Pins & Cotter Pins) Inside Bearing Seal Plate Bearing Plastic Seal Outside Bearing Seal Plate RT / RTX SERIES

14 VARIABLE SPEED CLUSTER DRIVE Meyer Manufacturing Corporation RT / RTX SERIES

15 KEY PART NUMBER QTY DESCRIPTION :1 Berma Next Generation Auger Gearbox 1-1/ Bore, 5/16 Keyway /16 x 5/16 x " Square Key With Square Ends /16 x 5/16 x 1-/ Square Key With Square Ends Gearbox Mount Bracket Plastic Shield Top Support Bracket Chain Tightener Bracket Weldment Front Idler Bracket Assembly Less Shaft Front Chain Idler Shaft 1-1/8 x C105 Hardened Idler Sprocket With Needle Bearing Assembly Thrust Bearing Washer 1.90 ID x.000 OD x /8 Thrust Bearing Shielded Variable Sheave Half Sliding /8 x 2-1/2 Long Coiled Spring Pin Variable Sheave Half Fixed Z 2 /8-16 x -1/2 Hex Head Cap Screw Grade Double Pulley, 1-/8 Bore, 5/16 Keyway /8 Pillow Block Bearing With Setscrew Lock Front Apron Bearing Welded Assembly Z 1 1/2-1 x 1-1/ Grade 5 Machine Bolt Zinc Variable Speed Spring Washer Weldment Next Generation Variable Speed Spring ID x 1.87 OD x 0.15 Machine Bushing /2 Internal Snap Ring Thick /8 Shield Steel Bearing 2-1/2 Outside Diameter Idler Pulley / Degree Grease Fitting A A2 Sprocket 2.752" Bore Z /8 Internal Tooth Lock Washer Zinc Z /8-16 x 1-1/ Machine Bolt Zinc M Z 2 M x 70MM Metric Hex Head Machine Bolt M Z 2 M MM Metric Hex Head Machine Bolt M1-Z 2 M1 Split Lock Washer Torque Arm Weldment Torque Arm Retainer /8 x /8 x 1-1/ Square Key (Prior to SN 18R625) B B28 1-1/2 Bore Sprocket, /8 Keyway With Two /8 Setscrews (Prior to SN 18R625) B B28 1-1/2 Bore Sprocket, Splined With Two /8 Setscrews (SN 18R625 & Later) :1 Berma Next Generation Apron Gearbox 2" Bore, 1/2 Keyway /2 x 1/2 x Square Machine Key With Square Ends Idler Shaft RT / RTX SERIES

16 VARIABLE SPEED CLUSTER DRIVE (CONT D) Meyer Manufacturing Corporation RT / RTX SERIES

17 KEY PART NUMBER QTY DESCRIPTION H 1 5/16 x 5/16 x 1-1/ Through Hardened Key B B15 1-/8 Bore, 5/16 Keyway Sprocket, With Two 5/16 Setscrews 1 See Page 10 1 Right Hand End Frame Double V-Belt Variable Speed Belt # Link Roller Chain Including Connector and Offset #50-7 Link Roller Chain Including Connector and Offset Plastic Shield Assembly With Hinge And Support Piece Left Hand Discharge Shield Mount Plate Manual Holder With Drilled Vent Hole Gearbox Plastic Shield Left Hand Discharge Plastic Shield Support Piece With Hinge Plastic Cluster Door Hinge K 1 Plastic Shield Kit With Mount, Support Bracket With Hinge, And Filler Bracket Lynch Pin Gearbox Shield Filler Bracket ID x 1.87 OD x Machine Bushing Torsion Spring Chain Tightener Spring Nylon Slide Chain Tightener Paddle / Degree Grease Fitting Idler Pulley Assembly Complete With Bearings, Sprocket, And Fasteners 59 See Page 18 1 Variable Speed Control Arm Mount Bracket Weldment 60 See Page 18 1 Independent Out-Feed Clutch Tightener Arm Weldment RT / RTX SERIES

18 SHIFTER CONTROLS Meyer Manufacturing Corporation RT / RTX SERIES

19 KEY PART NUMBER QTY DESCRIPTION Independent Outfeed Clutch Variable Mount Brake Weldment Independent Outfeed Clutch Pivot Sleeve Linkage Arm Welded Assembly Independent Outfeed Clutch Pivot Sleeve Pin Weldment Snugulator /8-16 x 7-1/2 Hex Bolt Grade A Independent Outfeed Clutch Linkage Pivot Sleeve Weldment Independent Outfeed Clutch Tightener Arm Linkage Independent Outfeed Clutch Tightener Arm Weldment Independent Outfeed Clutch Tightener Arm Linkage Speed Control Welded Assembly Variable Speed Control Arm Mount Bracket Weldment Belt Deflector Welded Assembly Variable Speed Control Arm Mount Plate Brace 1 See Page 10 1 Right Hand End Frame /8 ID Rubber Grip Independent Outfeed Clutch Handle Weldment With Grip Z 1 /8-16 Jam Nut Zinc 18 See Page 10 1 Apron Pan Z 1 1/-20 Indented Locknut Zinc SS 1 1/2 Shoulder x / x /8-16 Socket Shoulder Bolt, Stainless Steel, 5/8 Long Thread Shifter Roller M6Z 2 M6 Flat Washer Zinc Plated ID x OD 1 Row Double Shield Radial Ball Bearing Z 1 1/ Fender Washer, Zinc Z 1 1/-20 x 1-1/ Stove Bolt Zinc Variable Control Weldment Z 1 1/2 Spin Lock Nut Fine Threaded Spade Bolt #0-5 Link Roller Chain Link Each End #0 Connector Roller Link /2 Swivel Eyelet Variable Handle Weldment Speed Control Handle Selector Bracket Weldment Control Arm Bracket Weldment Z 1 1/2-1 x 2 Machine Bolt Z 1 1/2-1 Indented Lock Nut Control Rod Bearing Mount Welded Assembly Z 1 1/2-20 Nut Fine Thread 5 RT-VC-KIT 1 Variable Control Kit Chain Linkage Update (Prior to SN 16R621) RT / RTX SERIES

20 INDEPENDENT OUTFEED CLUTCH DRIVE Meyer Manufacturing Corporation RT / RTX SERIES

21 KEY PART NUMBER QTY DESCRIPTION " Double Pulley 1-1/ Bore 1/ Keyway B B20 1-1/ Bore, 1/ Keyway Sprocket, With Two 5/16 Setscrews / Bearing Flange / Bearing With Lock Collar Independent Out-Feed Clutch Handle Pivot Shaft Weldment /8-16 x 17" Hex Cap Screw Z 2 /8 Flat Washer Zinc Clutch Tightener Arm Weldment " Snugulator Independent Outfeed Clutch Linkage Extension Independent Outfeed Clutch Shifting Handle Weldment With Grip /8 ID Rubber Grip Independent Outfeed Clutch Main Clutch Plate Weldment / x 1/ x 1-1/2 Square Key / x 1/ x 1 Square Machine Key With Square Ends / x 1/ x 1-1/8 Square Key Independent Outfeed Clutch Idler Shaft Independent Outfeed Clutch Center Drive Shaft 19 See Page 10 1 Apron Pan Z 2 /8-16 Nut Zinc Independent Outfeed Clutch Linkage Pivot Sleeve Weldment Double V-Belt Z 1 / -10 x Grade 5 Machine Bolt / -10 Jam Nut Clutch Tightener Assembly Extension Spring RT / RTX SERIES

22 INDEPENDENT OUTFEED CLUTCH Meyer Manufacturing Corporation RT / RTX SERIES

23 KEY PART NUMBER QTY DESCRIPTION Emergency Stop Control Bar Welded Assembly 2 See Page 20 1 Independent Outfeed Clutch Main Clutch Plate Weldment See Page 20 1 Independent Outfeed Clutch Shifting Handle Weldment With Grip Z 2 1/ Spin Lock Nut Z 1 1/ -20 x 1 Eyebolt Zinc 2 Overall / 1 Shank Emergency Stop Front Cable With Clamps /2 Thimble /2 Uncoated Cable (RT/RTX216) (Per Foot Per Side) 22 /2 Uncoated Cable (RT/RTX218) (Per Foot Per Side) 2 /2 Uncoated Cable (RT/RTX220) (Per Foot Per Side) 26 /2 Uncoated Cable (RT/RTX222) (Per Foot Per Side) /2 Aluminum Crimp Clamp RT / RTX SERIES

24 AUGERS AND AUGER DRIVE OPTIONAL TH AUGER Meyer Manufacturing Corporation RT / RTX SERIES

25 KEY PART NUMBER QTY DESCRIPTION Bottom Auger Assembly / /8 x /8 x 1-1/ Square Key /1 1-1/ Bearing Flange /7 1-1/ Bearing With Lock Collar B15 1-1/ Bore /8 Keyway Sprocket #60-82 Roller Chain Including Connector st/2nd Auger Shield Complete /6 Torsion Spring Chain Tightener Spring Auger Chain Tightener Bracket / " Nylon Slide Chain Tightener Paddle B B18 1-1/ Bore /8 Keyway Sprocket With Two /8 Set Screws /8 x /8 x 1 Square Machine Key With Square Ends nd Auger Assembly nd/rd Auger Shield B B19 1-1/ Bore /8 Keyway Sprocket With Two /8 Set Screws rd Auger Assembly /2 2nd/rd Auger Bracket (Welded On) /2 Tightener Bracket Tube Spacer rd/th Auger Shield Complete (Prior to SN 17R622) rd/th Auger Shield Complete (SN 17R622 & Later) B6 1-1/ Bore /8 Keyway Sprocket With Two /8 Set Screws th Auger Welded Assembly #50-90 Roller Chain Including Connector (Prior to SN 17R622) #50-9 Roller Chain Including Connector (SN 17R622 & Later) #50-98 Roller Chain Including Connector st/2nd Auger Chain Tightener Assembly B17 1-1/ Bore /8 Keyway Sprocket With Two /8 Set Screws 26 RTX-A-KIT 1 th Auger Kit (Prior to SN 17R622) RTX-A-6B-KIT 1 th Auger Kit (SN 17R622 & Later) Lower Auger Bearing Seal Spacer Lower Auger Bearing Seal Lower Auger Bearing Seal Cover RT / RTX SERIES

26 MAIN APRON DRIVE SYSTEM REAR FRONT 10 6 Meyer Manufacturing Corporation RT / RTX SERIES

27 KEY PART NUMBER QTY DESCRIPTION 1 See Page 2 1 Rear Apron Shield Assembly Z 1/2-1 x 7 Tap Bolt Full Thread Main Apron Tightener Nut RT Rear Idler Pipe RXT Rear Idler Pipe 5 See Page 28 2 Rear Floor Cover B B Pitch Sprocket 2.00 Bore / Key Z 1/2 Split Lock Washer /2 x 1/2 x 2 Square Key 9 See Page 1 1 1/2 x 1/2 x Square Machine Key With Square Ends Center Main Drive Bearing Male Compression Fitting For Front Straight Grease Zerk For Rear Main Roller Left Bearing Assembly B Rear Idler Sprocket With Bushing Rear Idler Spacer 1 See Page :1 Berma Front Apron Gearbox 2 Bore, 1/2 Keyway 1 See Page 1 1 Front Apron Bearing Welded Assembly Reverse Chain Guide Panel Main Drive Shaft Male Connector Brass CT AR 1/ Copper Tubing System (By the foot) Main Apron Drive Shaft Assembly RT X Main Apron Chain Assembly RT/RTX X Main Apron Chain Assembly RT/RTX X Main Apron Chain Assembly RT/RTX X Main Apron Chain Assembly RTX62 667X Main Apron Chain Assembly RTX X Main Apron Chain Assembly /8 NPT Straight Grease Zerk /2 Front Right Main Bearing Grease Line Assembly AR Main Apron Slat " Front Center Main Bearing Grease Line Assembly AR Chain Slat With Attachments-667X D AR Attachment Link-D667X AR Rivet, /8 x D AR Pintle Chain Link-D667X RT / RTX SERIES

28 MAIN FRAME 2015 MODEL YEAR AND LATER Meyer Manufacturing Corporation RT / RTX SERIES

29 KEY PART NUMBER QTY DESCRIPTION Extension Screen 9 x 7 (RT616, RT618, RT620, RT622) Extension Screen 9 x 82 (RTX620, RTX622, RTX62, RTX626) Extension Screen 9 x 97 (RT616, RT618, RT620, RT622) Extension Screen 9 x 11 (RTX620, RTX622, RTX62, RTX626) Extension Screen 9 x 7 (RT616, RT618, RT620, RT622) Extension Screen 9 x 82 (RTX620, RTX622, RTX62, RTX626) Extension Screen 9 x 8 (RTX620, RT622) Extension Screen 9 x 6 (RTX620) Extension Screen 9 x 112 (RTX622, RTX62, RTX626) Extension Screen 9 x 7 (RT622) Extension Screen 9 x 82 (RTX622, RTX62, RTX626) Extension Screen 9 x 8 (RT616, RT622, RTX62) Extension Screen 9 x 72 (RT618, RTX626) Extension Screen 9 x 96 (RT620) Extension Screen 9 x 80 (RTX620) Extension Screen 9 x 2 (RTX622) Solid Extension Panel 9 x 95 (RT616, RT620) Solid Extension Panel 9 x 119 (RT618, RT622) Solid Extension Panel 9 x 6 (RTX620, RTX62) Solid Extension Panel 9 x 9 (RTX622) Solid Extension Panel 9 x 87 (RTX626) 5 761II Painted Galvanized Panel 0-/ x 192 (RT616) 761II Painted Galvanized Panel 0-/ x 216 (RT618) 761II Painted Galvanized Panel 0-/ x 20 (RT620, RTX620) 761II Painted Galvanized Panel 0-/ x 26 (RT622, RTX622) 761II Painted Galvanized Panel 0-/ x 288 (RTX62) 761II Painted Galvanized Panel 0-/ x 12 (RTX626) 6 See Page 16 1 Variable Speed Cluster Drive Door Latch Rear Floor Cover Front Right And Rear Left Chain Guide Cap Front Chain Guide 96 (RT616, RTX62) Front Chain Guide 120 (RT618, RT620, RT622, RTX620, RTX622, RTX626) Chain Guide Splice Connector (RT616, RT620, RTX620) Chain Guide Splice Connector (RT622, RTX622, RTX62, RTX626) Middle Chain Guide 96 (RTX62, RTX626) Middle Chain Guide 81-/ (RT222, RTX222) Rear Chain Guide 81-/ (RT616, RT618, RTX62, RTX626) Rear Chain Guide 105-/ (RT620, RTX620) Rear Chain Guide 8 (RT622, RTX622) Wood Floor (RT616) Poly Floor (RT616) Wood Floor (RT618) Poly Floor (RT618) Wood Floor (RT620) Poly Floor (RT620, RTX620) Wood Floor (RT622) Poly Floor (RT622, RTX622) Poly Floor (RTX62) Poly Floor (RTX626) Front Left And Rear Right Chain Guide Cap 15 Call Main Frame Welded Assembly RT / RTX SERIES

30 ROOF ASSEMBLY 2 1 7, , Meyer Manufacturing Corporation RT / RTX SERIES

31 KEY PART NUMBER QTY DESCRIPTION Complete Roof Assembly (16 ) Complete Roof Assembly (18 ) Complete Roof Assembly (20 ) Complete Roof Assembly (22 ) Complete Roof Assembly (2 ) Complete Roof Assembly (16 ) (6 Higher Roof Option) Complete Roof Assembly (18 ) (6 Higher Roof Option) Complete Roof Assembly (20 ) (6 Higher Roof Option) Complete Roof Assembly (22 ) (6 Higher Roof Option) Complete Roof Assembly (2 ) (6 Higher Roof Option) Ribbed Steel Roof Sheet (16 ) Ribbed Steel Roof Sheet (18 ) Ribbed Steel Roof Sheet (20 ) Ribbed Steel Roof Sheet (22 ) Ribbed Steel Roof Sheet (2 ) Front Roof Cap Front Left Roof Cap (6 Higher Roof Option) (Not Illustrated) Front Right Roof Cap (6 Higher Roof Option) (Not Illustrated) Roof Guard Strap Roof Guard Strap (6 Higher Roof Option) (Not Illustrated) Rear Roof End Cap Rear Roof End Cap (6 Higher Roof Option) Front Left Roof Rail (16, 20, 2 ) Front Left Roof Rail (18 ) Front Left Roof Rail (22 ) Roof Bow (RT616, RT618) Roof Bow (RT616/RT618 With 6 Higher Roof Option) Roof Bow (RT620, RTX620) Roof Bow (RT620/RTX620 With 6 Higher Roof Option) Roof Bow (RT622, RTX622, RTX22) Roof Bow (RT622/RTX622/RTX62 With 6 Higher Roof Option) Rear Right Roof Rail (16 ) Rear Right Roof Rail (18 ) Rear Right Roof Rail (20 ) Rear Right Roof Rail (22 ) Rear Right Roof Rail (2 ) Center Right Roof Rail (20, 2 ) (Not Illustrated) Center Right Roof Rail (22 ) (Not Illustrated) Rear Left Roof Rail (16 ) Rear Left Roof Rail (18 ) Rear Left Roof Rail (20 ) Rear Left Roof Rail (22 ) Rear Left Roof Rail (2 ) Center Left Roof Rail (20, 2 ) (Not Illustrated) Center Left Roof Rail (22 ) (Not Illustrated) Front Right Roof Rail (16, 20, 2 ) Front Right Roof Rail (18 ) Front Right Roof Rail (22 ) RT / RTX SERIES

32 REAR STATIONARY GATE Meyer Manufacturing Corporation RT / RTX SERIES

33 KEY PART NUMBER QTY DESCRIPTION Rear Stationary Gate Assembly Rear Stationary Gate Assembly (12 Higher Sides Option) Rear Stationary Gate Frame Weldment Rear Stationary Gate Frame Weldment (12 Higher Sides Option) Rear Apron Shield With Decals 761II Upper Painted Galvanized Panel Lower Painted Galvanized Panel Vertical Support Vertical Support (12 Higher Sides Option) Rear Apron Deflector Support Bracket Rear Apron Deflector RT / RTX SERIES - -

34 HIGHWAY LIGHT PACKAGE KIT TRAILER / WAGON TAIL LIGHT SYSTEM TRUCK TAIL LIGHT SYSTEM Meyer Manufacturing Corporation - - RT / RTX SERIES

35 KEY PART NUMBER QTY DESCRIPTION Store-A-Way Plug Holder (For 7 Pole Plug) Coil Cable Assembly Contact Plug Only Pin Socket Pole Plug /2 EMT Coupler Light Wire Tube 1/2 Diameter x 22 Long / Loom Clamp LED Enhancer Module With Connectors AR Conductor Trailer Cable Caution Tail Light Decal Y-Harness Less Light Plug Leads /8 Plated Loom Clamp Right/Left Light Pigtail Lead 15 See Page 1 Rear Apron Shield With Decals Oval Grommet Diode Oval Lamp With Red LED (Trailer/Wagon Mount) Diode Oval Lamp With Red LED (Truck Mount) Diode Oval Lamp With Amber LED (Trailer/Wagon Mount) / Vinyl Coated Steel Clamp RT / RTX SERIES

36 AUGER GEARBOX Use EP Oil Meyer Manufacturing Corporation RT / RTX SERIES

37 KEY PART NUMBER QTY DESCRIPTION :1 Berma Auger Gearbox Complete Input Shaft Kit Gearbox Input Gasket Snap Ring Snap Ring Bearing Pinion Oil Plug Double Lip Oil Seal Oil Level Indicator Housing Oil Breather Plug Output Bearing Gear Snap Ring / Diameter Hub Bearing Gasket M10 x 20 Screw Cover Support M12 x 65 Hex Head Screw Snap Ring Bearing Key Oil Seal Input Shaft RT / RTX SERIES

38 FRONT APRON GEARBOX Use EP Oil Meyer Manufacturing Corporation RT / RTX SERIES

39 KEY PART NUMBER QTY DESCRIPTION :1 Berma Apron Gearbox Oil Seal Shaft Key Bearing Snap Ring M12 x 85 Hex Head Screw Support Snap Ring Cap Snap Ring Bearing Gear Key Pinion Cap Bearing Pinion Key Gear Oil Seal Snap Ring Bearing " Diameter Hub Snap Ring Gear Cover Gasket Cover M8 x 16 Cover Bolt Oil Plug Pinion Bearing Snap Ring Input Gasket Complete Input Shaft Assembly Oil Level Indicator Housing Oil Breather Plug RT / RTX SERIES

40 12R UNIVERSAL JOINT TELESCOPING ASSEMBLY WITH GUARD Meyer Manufacturing Corporation RT / RTX SERIES

41 KEY PART NUMBER QTY DESCRIPTION Joint Assembly, 12R Universal Joint And Tube Half With Guard (Implement Half) R Cross And Bearing Kit Yoke, Tube, And Slip Sleeve Nylon Repair Kit Inner Guard With Bearing And Retainer Joint And Shaft Half With Guard (Tractor Half) Outer Guard With Bearing And Retainer Yoke And Shaft Spring - Lock Yoke Assembly Spring - Lock Repair Kit Yoke, 1-1/ Bore, 1/ Keyway, With Roll Pin Hole RT / RTX SERIES

42 STEEL STRINGER TIE DOWN KIT Steel Stringer Channel Rear Wagon Bolster Front Wagon Bolster Meyer Manufacturing Corporation RT / RTX SERIES

43 KEY PART NUMBER QTY DESCRIPTION S 1 Tie Down Kit (Steel Stringers) Standard Tie Down Bracket " Standard Tie Down Chain HD 61" Heavy Duty Tie Down Chain For Riser Option Z Bolt, Hex Machine - /8 x 1-1/ Z 8 /8 Flat Washer Z /8 Lock Nut Z 8 1/2 x 1-1/2 Hex Machine Bolt Z 8 1/2 Flat Washers Z 8 1/2 Lock Nuts RT / RTX SERIES - -

44 Meyer Manufacturing Corporation - - RT / RTX SERIES

45 OPTIONAL EQUIPMENT DESCRIPTION PAGE # OPTIONAL TH AUGER See Page 2 RT-CE-1K, RT-CE-2K, RT-CE-K 2, 6, 8 Chain Cross Conveyor Extension Kit See Page 6 HYDRAULIC FRONT DRIVE See Page 50 HYDRAULIC FRONT DRIVE TRUCK MOUNT See Page RT / RTX SERIES

46 RT-CE-1K, RT-CE-2K, RT-CE-K 2", 6", 8" CHAIN CROSS CONVEYOR EXTENSION KIT Meyer Manufacturing Corporation RT / RTX SERIES

47 KEY PART NUMBER QTY DESCRIPTION RT-HCE 1 Non-Hydraulic to Hydraulic Extension Conversion Kit 0 RT-CE-1K 1 Left Discharge 2 Cross Conveyor Extension Kit RT-CE-1K-RH 1 Right Discharge 2 Cross Conveyor Extension Kit RT-HCE-1K 1 Left Discharge 2 Hydraulic Cross Conveyor Extension Kit RT-HCE-1K-RH 1 Right Discharge 2 Hydraulic Cross Conveyor Extension Kit RT-CE-2K 1 Left Discharge 6 Cross Conveyor Extension Kit RT-CE-2K-RH 1 Right Discharge 6 Cross Conveyor Extension Kit RT-HCE-2K 1 Left Discharge 6 Hydraulic Cross Conveyor Extension Kit RT-HCE-2K-RH 1 Right Discharge 6 Hydraulic Cross Conveyor Extension Kit RT-CE-K 1 Left Discharge 8 Cross Conveyor Extension Kit RT-CE-K-RH 1 Right Discharge 8 Cross Conveyor Extension Kit RT-HCE-K 1 Left Discharge 8 Hydraulic Cross Conveyor Extension Kit RT-HCE-K-RH 1 Right Discharge 8 Hydraulic Cross Conveyor Extension Kit Left Discharge 2 Cross Conveyor Extension Frame Weldment RH 1 Right Discharge 2 Cross Conveyor Extension Frame Weldment FB 1 Left Discharge 2 Hydraulic Cross Conveyor Extension Frame Weldment FB-RH 1 Right Discharge 2 Hydraulic Cross Conveyor Extension Frame Weldment Left Discharge 6 Cross Conveyor Extension Frame Weldment RH 1 Right Discharge 6 Cross Conveyor Extension Frame Weldment FB 1 Left Discharge 6 Hydraulic Cross Conveyor Extension Frame Weldment FB-RH 1 Right Discharge 6 Hydraulic Cross Conveyor Extension Frame Weldment Left Discharge 8 Cross Conveyor Extension Frame Weldment RH 1 Right Discharge 8 Cross Conveyor Extension Frame Weldment FB 1 Left Discharge 8 Hydraulic Cross Conveyor Extension Frame Weldment FB-RH 1 Right Discharge 8 Hydraulic Cross Conveyor Extension Frame Weldment Extension Catch Bracket With Handle & Grip (Non-Hydraulic Lift Only) /2 x Rubber Grip Extension Handle (Non-Hydraulic Lift Only) Cross Conveyor Extension Handle Welded Assembly With Grip, 2 (Non- Hydraulic Lift Only) Cross Conveyor Extension Handle Welded Assembly With Grip, 6 & 8 (Non-Hydraulic Lift Only) x Black Plastic Grip Extension Handle, 2 (Non-Hydraulic Lift Only) x Black Plastic Grip Extension Handle, 6 & 8 (Non-Hydraulic Lift Only) D 1 Cross Apron Pintle Chain Extension Assembly Link, D-6 1 Cross Apron Pintle Chain Extension Assembly Link, D-8 1 Cross Apron Pintle Chain Extension Assembly Link, GS Gas Spring, 5.5 Stroke, 15, 80 PSI, 2 (Non-Hydraulic Lift Only) Gas Spring, 5.5 Stroke, 15,120 PSI, 6 & 8 (Non-Hydraulic Lift Only) Chain Hold Down Shaft 17/2 ID x 1-1/2 OD x Extension Belting Bracket RT / RTX SERIES

48 RT-CE-1K, RT-CE-2K, RT-CE-K 2", 6", 8" CHAIN CROSS CONVEYOR EXTENSION KIT (CONT D) Meyer Manufacturing Corporation RT / RTX SERIES

49 KEY PART NUMBER QTY DESCRIPTION Extension Handle Catch Mount Bracket (Non-Hydraulic Lift Only) Front Extension Belting Bracket Extension Spring Front Gate & Extension Catch (Non-Hydraulic Lift Only) Front Extension Belt (2 Extension) Front Extension Belt (8 Extension) Front Extension Belt (8 Extension) Z 2 1/2-1 Indented Lock Nut Z 2 1/2-1 x 2-1/ Finish Button Socket Cap Screw Rear Extension Belt (2 Extension) Rear Extension Belt (6 Extension) Rear Extension Belt (8 Extension) NS Cylinder Upper Mount Weldment (Hydraulic Extension) NS Boss Plate Front Pipe Weldment (Hydraulic Extension) NS Hydraulic Hose Tender Spring Kit With Sleeve & Hardware (Hydraulic Extension) NS Hydraulic Fitting (Hydraulic Extension) NS Hydraulic Cylinder 2 Bore x 10 Stroke (Hydraulic Extension) NS 155-0R / x 57 Hose (Hydraulic Extension) NS 155-0R / x 5 Hose (Hydraulic Extension) NS Hydraulic Fitting (Hydraulic Extension) NS Male Coupling Tip (Hydraulic Extension) NS / x 10 Hose (Hydraulic Extension) NS Twin Series Hose Clamp (Hydraulic Extension) NS Hydraulic Pipe /8 SCH0 x 2-7/8 (Hydraulic Extension) NS Hydraulic Pipe /8 SCH0 x 26-/8 (Hydraulic Extension) NS S-1 1 1/ Twin Hose Clamp Insert Only (Hydraulic Extension) NS /2 x 2 Cotter Pin (Hydraulic Extension) NS /8 NPT Coupler (Hydraulic Extension) NS Z 1/ Push Bolt Retainer (Hydraulic Extension) RT / RTX SERIES

50 HYDRAULIC FRONT DRIVE KEY PART NUMBER QTY DESCRIPTION CU. IN. T-Series Motor Adapter 155-CV-1906P 1 25 GPM Check Valve FP-12FP Female Pipe Coupling Hose Tender Spring W/Sleeve & Clamp R Hydraulic Hose, 1/2 x 12, 1/2-1 MP x /-16 MP Male Coupling Tip Meyer Manufacturing Corporation RT / RTX SERIES

51 HYDRAULIC FRONT DRIVE TRUCK MOUNT KEY PART NUMBER QTY DESCRIPTION CU. IN. T-Series Motor Adapter / Poly Plug FP-12FP Female Pipe Coupling CV-1906P 1 25 GPM Check Valve RT / RTX SERIES

52 Meyer Manufacturing Corporation RT / RTX SERIES

53 NOTES

54 NOTES

55 MAINTENANCE RECORD MODEL NO. SERIAL NO. DATE SERVICE PERFORMED DATE SERVICE PERFORMED Manufactured by: Meyer Manufacturing Corporation 67 W. Business Cty Rd A Dorchester, WI 525 Phone: Fax: sales@meyermfg.com Website:

56 Meyer Manufacturing Corporation 67 W. Business Cty Rd A Dorchester, WI 525 Phone: Fax: sales@meyermfg.com Website: