VACUUM THE VACUUM SHOPPER

Transcription

1 VACUUM THE VACUUM SHOPPER Open 24/7 For On-Line Shopping-Free Shipping! Mechanical Pumps PAGE 2 Calibration Services PAGES Rental Leak Detectors PAGE 76 CALIBRATION LABORATORY: Power Feedthroughs PAGE 18 GAS LEAKS Page 16 & 17 Thermocouple Gauges PAGE 11 Manufactured By LDS For Over 30 Years SAVE THOUSANDS BY PURCHASING YOUR STANDARDS FROM LDS VACUUM ESSENTIALS-COMBINING PRODUCTS TO SAVE EVEN MORE! Weld Flanges Pages Mass Flow Page 10 Thin Film Supplies Page 9 Valves Pages Way Crosses Page 60

2 oerlikon leybold vacuum MECHANICAL PUMPS MECHANICAL PUMPS NT5 NT10 NT16 D25B D40B D65B Actual Pumping Speed (CFM) Noise Level db(a) <49 <49 < Motor (HP) Pump Rotational Speed (RPM) Minimum Oil Capacity 0.75 L 0.75 L 0.70 L 0.5 qt 1.8 qt 2.1 qt Maximum Oil Capacity 1.25 L 1.25 L 1.20 L 1.5 qt 2.7 qt 3.4 qt Inlet Exhaust Flange NW25 NW25 NW25 NW25 NW40 NW40 Weight (lbs) Price $2118 $2370 $3101 $4170 $6552 $8376 Dual Voltage Motor 1-Ph, 50/60 Hz X X /460 volt, 3-Ph, 50/60 Hz Please visit our for detailed information on these pumps Leybold Pumps Rebuild Kit Model Minor Kit Major Kit (Minor Kit PLUS Vanes) D4A LEY-D4A-SK $120 LEY-D4A-MKV $210 D4B LEY-D4B-SK $140 LEY-D4B-MKV $234 D8A LEY-D8A-SK $135 LEY-D8A-MKV $238 D8B LEY-D8B-SK $140 LEY-D8B-MKV $249 D16A LEY-D16A-SK $135 LEY-D16A-MKV $262 D16B LEY-D16B-SK $160 LEY-D16B-MKV $274 D25B LEY-D25B-SK $160 LEY-D25B-MKV $286 D40B LEY-D40B-SK $229 LEY-D40B-MKV $327 D65B LEY-D65B-SK $229 LEY-D65B-MKV $363 MORE LEYBOLD PUMP KITS AVAILABLE ONLINE LET LDS REBUILD YOUR VACUUM PUMP SAVE TIME AND MONEY! In-House Pump Rebuilding... Fast Turn around and Low Prices Try the LDS ON-SITE PUMP REBUILDING Service For Hard To Transport Large Pumps 2

3 REBUILD KITS FOR ALCATEL EDWARDS LEYBOLD PFEIFFER WELCH VARIAN VACUUM PUMPS AVAILABLE ONLINE VARIAN VACUUM PUMPS - REBUILD KITS Model Minor Kit Major Kit (Minor Plus Vanes) DS102 VAR-DS102-SK $129 VAR-DS102-MKV $249 DS202 VAR-DS202-SK $129 VAR-DS202-MKV $289 DS302 VAR-DS302-SK $129 VAR-DS302-MKV $289 DS402 VAR-DS402-SK $139 VAR-DS402-MKV $349 DS602 VAR-DS602-SK $139 VAR-DS602-MKV $349 WELCH VACUUM PUMPS - REBUILD KITS Model Shaft Seal Kit Minor Kit Major Kit (Minor Plus Vanes) D-DR $54 WEL-1373-SK $231 WEL-1373-MKV $ F-DR $121 WEL-1374-SK $182 WEL-1374-MKV $ D-DR $54 WEL-1376-SK $99 WEL-1376-MKV $ D-DR $54 WEL-1380-SK $165 WEL-1380-MKV $ F-DR $121 WEL-1397-SK $176 WEL-1397-MKV $ E-DR $54 WEL-1399-SK $74 WEL-1399-MKV $ E-DR $54 WEL-1400-SK $79 WEL-1400-MKV $ D-DR $54 WEL-1402-SK $97 WEL-1402-MKV $ E-DR $54 WEL-1403-SK $67 WEL-1403-MKV $ E-DR $54 WEL-1404-SK $67 WEL-1404-MKV $ E-DR $54 WEL-1405-SK $87 WEL-1405-MKV $ E-DR $54 WEL-1410-SK $65 WEL-1410-MKV $ E-DR $54 WEL-8806-SK $73 WEL-8806-MKV $ E-DR $54 WEL-8811-SK $73 WEL-8811-MKV $ E-DR $54 WEL-8814-SK $73 WEL-8814-MKV $ A 8917K03 $72 WEL-8907A-SK $172 WEL-8907A-MKV $ A 8917K03 $72 WEL-8912A-SK $172 WEL-8912A-MKV $284 PUMP SCHEMATICS AVAILABLE ONLINE FREE MANUAL AVAILABLE WITH YOUR PUMP KIT PURCHASE - JUST ASK WELCH PUMP ADAPTORS REPLACEMENT INLET HOSE CONNECTOR - INCLUDES METAL GASKET THREAD SERIES WELCH PUMP MODEL PART NUMBER EACH 5 / 8 "-18 Old-Style 1399, 1400, 1410 NW WP1 $49 ¾ -20 Old-Style 1405 NW WP2 $49 New-Style 1399, 1400, 1405 NW16-WP-NS $ , 1402, 1403, 8806 Old-Style 1" , 8816, 8821 NW WP1 $59 New-Style 1373, 1376, 1380, 1402 NW25-WP-NS $89 1½"-20 Old-Style 1373, 1376, 8831 NW WP1 $69 1¾ -20 Old-Style 1374, 1397, 8851 NW WP2 $79 New-Style 1397 NW40-WP-NS $109 PUMP DESIGN CHANGES BY THE MANUFACTURER NEW STYLE: Oil sight glass pressed into pump body OLD STYLE: Oil sight glass held in place with a bolt ring 3

4 PTFE AND HALOCARBON PASTE/GREASE - OXYGEN COMPATIBLE Joint and Thread Sealer HIGH VACUUM Torr Applications Blended formula of PTFE particles & Halocarbon oil, producing a superior sealant that is chemically inert & environmentally safe. Leak tight sealing in a wide range of vacuum requirements. EXTREME TEMPERATURES Cryogenic to +450ºF Compatible with many aggressive chemicals BAM certified gaseous & liquid oxygen service Easy to apply Water Proof Anti-Galling Anti-Corrosive Anti-Seize Chemically Inert Non-Toxic Non-flammable Non-Migrating Odorless Dielectric Lubricating Not recommended for aluminum against aluminum applications. Do not use with concentrated alkalis, fluorine (liquid) or chlorine trifluoride (liquid). Female NPT Page 26 OC FIVE Compare To Krytox Grease! OC SEVEN (GREASE) (PASTE) 2 oz. Jar $52 2 oz. Jar $59 16 oz. Jar $ oz. Jar $324 PTFE AND HALOCARBON PASTE - OXYGEN COMPATIBLE Joint and Thread Sealer MEDIUM VACUUM Torr Applications EXTREME TEMPERATURES -400ºF to +500ºF BAM certified gaseous & liquid oxygen service Seals oxygen and acetylene cylinder valves Compatible with many aggressive chemicals Easy to apply Water Soluble Anti-Galling Anti-Corrosive Anti-Seize Chemically Inert Non-Toxic Non-Flammable Non-Migrating Odorless OC THREE (PASTE) 4 oz. Tube $26 LDS 91-S SILICONE VACUUM GREASE HIGH VACUUM Torr Applications Maintains consistency from -30ºF to +500ºF Compare to Dow Corning High Vacuum Grease Compare to Dow Corning High Vacuum Grease 2 oz. Jar DR $9 4 oz. Jar DR $ oz. Tube DR $19 1 lb. Jar DR $43 TORR SEAL EQUIVALENT EXACT VARIAN EQUIVALENT TORR SEAL EQUIVALENT WORKS WITH: Metals Ceramics Glass Epoxy resin conveniently seals leaks on any type of vacuum system or component. It is solvent-free and can be used at pressures of 10-9 Torr (mbar) and below, at temperatures from -45ºC to 120ºC (bakeable temperature). 4 oz. Kit VAR $15 4 oz Kit Contains 2.8 oz resin 1.2 oz hardener Torr Seal is a registered trademark of Varian, Incorporated 4

5 VACUUM PUMP FLUIDS LDS 19 - Mechanical Pump Fluid General Purpose Mechanical Pump Fluid. Recommended for use in non-corrosive applications. Vapor 25ºC: 1x10-5 torr LDS 20 - Mechanical or Diffusion Pump Fluid General purpose mechanical pump fluid used in applications involving corrosive or reactive gases Elite A - Direct Drive Mechanical Pump Fluid Molecular structures are unique and provide excellent chemical inertness and high temperature stability. Vapor 25 C: 1x10-7 Torr 40 C: 48 cst Gallon 5-Gallons Gallon 5-Gallons DR DR DR DR $24 $103 $75 $325 Gallon DR $130 Elite Z - Direct Drive - Mechanical Pump Fluid Molecular structures are unique and provide excellent chemical inertness and high temperature stability. Vapor 25 C: 1x10-7 Torr 40 C: 55 cst Gallon DR $130 LDS (Octoil S) - Diffusion Pump Fluid Ultimate pressure of 10-8 Torr and can be used in diffusion pumps whenever pressures of 10-7 Torr or below are required. 100cc 500cc DR DR $25 $80 LDS Silicone Diffusion Pump Fluid Designed for fast pumping of large volumes of gas or vapor in production operations. It can produce high vacuum in the range of 10-5 to 10-7 torr. Low cost equivalent to Dow Corning DC cc Gallon DR DR $100 $570 LDS Silicone Diffusion Pump Fluid For high vacuums of 10-6 torr (untrapped) and 10-8 (trapped). Low cost equivalent to Dow Corning DC cc 500cc 1000cc Gallon DR DR DR DR $30 $115 $215 $595 LDS Silicone Diffusion Pump Fluid Designed for ultra-high vacuum applications in the range of 10-9 to torr (untrapped). Low cost equivalent to Dow Corning DC cc 500cc Gallon DR DR DR $60 $225 $892 SantoVac 5 - Diffusion Pump Fluid Polyphenyl ether synthetic diffusion pump fluid capable of producing ultra-high vacuum in the torr range. Used in many Varian leak detectors. 65cc 500cc DR DR $140 $769 Flushing Fluid Solvent free hydrocarbon flushing fluid designed to be used as part of a preventive maintenance program. Periodic use of Flushing Fluid will enable the user to remove contaminants and particulates from within all areas of the pump without the worry of contaminating the pump with an expensive solvent. Gallon 5-Gallons DR DR $23 $97 TECHNICAL SPECIFICATIONS AR E AVAILABLE ONLINE ANTI-SEIZE STICK PAGE 54 5

6 MOLECULAR SIEVE TRAPS Part Number Ports OAL A B SALE Vacuum Essentials MST-NW16x4 NW $385 MST-NW16-VE $395 MST-NW25x4 NW $395 MST-NW25-VE $405 MST-NW40x4 NW $420 MST-NW40-VE $432 MST-NW50x4 NW $445 MST-NW50-VE $457 Above Price is For Trap Only & 1 lb of Sieve Charge ST-Z13x10 Molecular Sieve Charge $24 4" diameter trap heater rates at 120V, 125W Integral 115VAC regeneration heater Glass-bead blast finish Includes 1 lb. can of sieve material zeolite pellets COAXIAL FORELINE TRAPS - REFILLABLE Part Number Ports Height Body OAL Clamp OD Sale ESSENTIALS INCLUDES 2 Centering Rings (SR-V) 2 Clamp Wing Clamps (CW) Vacuum Essentials CFTR-NW16x4 NW $265 CFTR-NW16-VE $315 CFTR-NW25x4 NW $275 CFTR-NW25-VE $325 CFTR-NW40x4 NW $310 CFTR-NW40-VE $362 CFTR-NW50x4 NW $341 CFTR-NW50-VE $393 Above Price is For Trap Only & Installed Element ESSENTIALS INCLUDES 2 Ring & Clamp Assemblies Spare Metal Wool Element Foreline vapor trap Stainless Metal Wool Element Glass-bead blast finish COAXIAL FORELINE TRAPS - SEALED Part Number Ports Body OAL Sale Vacuum Essentials CFTS-NW16x4 NW $177 CFTS-NW16-VE $187 CFTS-NW25x4 NW $183 CFTS-NW25-VE $193 CFTS-NW40x4 NW $214 CFTS-NW40-VE $226 CFTS-NW50x4 NW $224 CFTS-NW50-VE $236 Foreline vapor trap ESSENTIALS INCLUDES Stainless Metal Wool Element - Non-replaceable 2 Ring & Clamp Assemblies Glass-bead blast finish Once unit is saturated, must be discarded OIL MIST ELIMINATOR - SMALL CFM PUMPS Part Number Ports CFM Sale Vacuum Essentials LDS NW16 NW16 5 CFM & Smaller $85 5CFM-NW16-VE $92 LDS NW25 NW25 5 CFM & Smaller $90 5CFM-NW25-VE $98 Above Price is For Eliminator Only & Installed Element Once unit is saturated, must be discarded ESSENTIALS INCLUDES 1 Ring & Clamp Assembly OIL MIST ELIMINATOR - 20 CFM & SMALLER PUMPS Part Number Ports CFM Sale Vacuum Essentials ALC CFM & Smaller $131 ALC VE $178 ALC Replacement Filters, 5 Pack $50 2 Ring & Clamp Assemblies 5 Replacement Filters Above Price is For Eliminator Only & Installed Element This oil mist eliminator is mounted at the exhaust of the rotary vane pump and separates oil droplets and vapors in the exhaust gases emitted by the oil sealed vacuum pumps. For use with standard mechanical NOT chemical series. 6

7 ALCATEL MECHANICAL PUMPS - REBUILD KITS MODEL MINOR KIT MAJOR KIT 2004A ALC $112 ALC $ A ALC $112 ALC $ A ALC $112 ALC $ A ALC $112 ALC $ AC ALC $222 ALC $ AC ALC $222 ALC $ AC ALC $222 ALC $ CP ALC $238 ALC $ CP ALC $238 ALC $ SD ALC $156 ALC $ SD ALC $210 ALC $ CP ALC $327 ALC $ CP+ ALC $327 ALC $ C2 ALC $327 ALC $ CP ALC $339 ALC $ CP+ ALC $339 ALC $ SD ALC $119 ALC $ SD ALC $119 ALC $ SD ALC $119 ALC $ SD ALC $119 ALC $ C1 ALC $292 ALC $ C1 ALC $292 ALC $ C2 ALC $292 ALC $ C1 ALC $292 ALC $ C2 ALC $292 ALC $640 ADDITIONAL SPARE PARTS AVAILABLE ONLINE DIRECT REPLACEMENT DIFFUSION PUMP HEATERS ADDITIONAL PUMP MODELS ONLINE Cooke CVC Denton Edwards Leybold NRC Torr Varian Veeco Direct Replacement Heaters Outperforms Original Equipment Heaters One Piece Assembly Simplifies Installation Complete Range of Shapes, Sizes and Electrical Ratings NOW AVAILABLE ONLINE - SHOP BY MODEL OR MANUFACTURER 7

8 vcube and VariCube Multi-Purpose Vacuum Pumping System This oil-free compact system is designed for rugged reliable use, longevity, ease of operation and multi-purpose vacuum requirements. Choose between rough or high vacuum features. Although the system utilizes a turbo pump to achieve its ultimate pressures the unit forsakes some of the standard operating procedures of a turbo pump. This unit can be moved while in either vacuum mode, positioned in any configuration, and accidentally vented to atmosphere. The vcube is so small it can literally be mounted in your configuration of choice using the quick connect inlet flange. Features Mountable In Any Configuration Small and Lightweight 8 x 8 or 13 x 13 Versions Movable While In Operation Extremely Rugged Oil free Reliable and Diverse Economical Impact Resistant Models vcube VariCube 80 VariCube 300 Pumping Speed Nitrogen 11 l/s 67 l/s 260 l/s Helium 6 l/s 58 l/s 255 l/s Hydrogen 37 l/s 48 l/s 220 l/s Compression Ratio Nitrogen 3 x x Helium 3 x x x10-8 Hydrogen 3 x x x 10-5 Ultimate Pressure 10-6 mbar mbar mbar Backing Pump 0.4 CFM Variable CFM Variable CFM Power 115 or 220 Dual Voltage Dual Voltage Dimensions 8 x 8 13 x x 13 Price $6900 $8900 $13500 vcube VariCube 80 Inlet Part No. VariCube 300 vcube Voltage Inlet Part No. NW40 V Inlet Part No. 115 VAC NW25 V ISO63 V ISO100 V VAC NW25 V010107A 4.50 CF V CF V LET LDS BUILD YOUR PUMPING STATION CONTACT OUR ENGINEERING DEPARTMENT TODAY! 8

9 THIN FILM SUPPLIES 5 MHz Crystal Discs Balzers, Umicore and Unaxis MATERIAL ADHESION LAYER PACK OF 10 PACK OF 30 Aluminum Alloy None TFS-01BA-10 $69 TFS-01BA-30 $195 Silver Chromium TFS-01BS-10 $69 TFS-01BS-30 $195 Gold Chromium TFS-01BG-10 $69 TFS-01BG-30 $195 AT cut,.550 diameter, plano/convex replacement QCM sensor 5 MHz Crystal Discs Sloan/Ulvac MATERIAL ADHESION LAYER PACK OF 10 PACK OF 30 Gold Chromium TFS-01SG-10 $69 TFS-01SG-30 $195 Silver Chromium TFS-01SS-10 $69 TFS-01SS-30 $195 Aluminum Alloy None TFS-01SA-10 $69 TFS-01SA-30 $195 AT cut,.490" diameter, plano/convex replacement QCM sensor 6 MHz Crystal Discs Inficon, Maxtek, Sycon, Edwards and Intellimetrics AT cut,.550 diameter, plano/convex replacement QCM sensor MATERIAL ADHESION LAYER PACK OF 10 PACK OF 30 Gold Chromium TFS-010G-10 $69 TFS-010G-30 $195 Silver Chromium TFS-001S-10 $69 TFS-001S-30 $195 Aluminum Alloy None TFS-003A-10 $69 TFS-003A-30 $195 COST-SAVINGS OPTION Electronically stable, long lasting and reliable, but minor cosmetic defects MATERIAL ADHESION LAYER PACK OF 10 PACK OF 30 Gold Chromium TFS-010G-2-10 $53 TFS-010G-2-30 $147 Aluminum Alloy None TFS-003A-2-10 $53 TFS-003A-2-30 $147 Foil (Aluminum) - Ultra-High Vacuum LENGTH THICKNESS WIDTH WEIGHT PART NUMBER PRICE " lbs. TFS-ASC-1518F $ linear feet " lbs. TFS-ASC-3024F $379 Greaseless and ready for vacuum use OVERALL DIMENSION THROUGH L x W x D Boat Sources Molybdenum (.015") Purity 99.9%-99.99% Tantalum (0.005") 2.5 x x 0.26 x 0.26 TFS-ASC-BS10-M $11 TFS-ASC-BS10-T $ x x 0.50 x 0.50 TFS-ASC-BS15-M $21 TFS-ASC-BS15-T $ x x 0.70 x 0.50 TFS-ASC-BS20-M $38 TFS-ASC-BS20-T $58 Absorbent Wipes - Lint Free PACK OF 100 WIPES TFS-ASC-LFT100 $39 PACK OF 250 WIPES TFS-ASC-LFT250 $74 PACK OF 500 WIPES TFS-ASC-LFT500 $124 More Online! Filament Posts Evaporation Compounds Boat Sources Tungsten Rods Teflon Wafer Carriers Teflon Wafer Baskets Chimney Evaporation Sources THIN FILM SUPPLIES 9

10 APEX Mass Flow Controllers 30 User Selectable Gases No Separate power supply or readout box required 100 to 1 turndown ratio. Control Up To 26 MFC s with one RS-232 port Calibration: Nitrogen (standard) or choose below Power is provided by 110V Power Cord Accuracy: ± 0.8% of Reading ±0.2% of Full Scale (at calibration conditions after tare) Repeatability: ± 0.2% Full Scale Operating Range: 1% to 100% Full Scale Measure & Control Typical Response Time: 100 Milliseconds (Adjustable) Operating Temperature: -10 to +50º Celsius Zero Shift: 0.02% Full Scale / º Celsius / Atm Span Shift: 0.02% Full Scale / º Celsius / Atm Humidity Range: 0 to 100% Non-Condensing Flow Rate: 102.4% Controllable Full Scale Maximum Pressure: 145 PSIG Input / Output Secondary: 0-5 vdcs Electrical Connections: 8 Pin (Mini Din) Sensitivity to Mounting Attitude: 0% Warm-up Time: < 1 Second Standard Conditions (STP): 25ºC & PSIA (Mass Reference Conditions) Input/Output Signal Standard: RS-232 Serial & 0-5 vdc OPTIONS AVAILABLE Mass Totalizer Pressure & Temperature Secondary Outputs Gas Blends Added on Display 9-Volt Battery powered (mass flow meters) 0.5 SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SLPM $2965 Air Argon Methane Carbon Monoxide Carbon Dioxide Ethane Hydrogen Helium Nitrogen Nitrous Oxide Neon Oxygen Propane Butane Acetylene Ethylene Iso-Butane Krypton Xenon Sulfur Hexafluoride 75% Argon + 25% C02 90% Argon + 10% C02 92% Argon + 8% C02 98% Argon + 2% C02 75% Argon + 25% Helium 75% Helium + 25% Argon 75% CO2 + 25% Argon Helistar A1025 Stargon CS 95% Argon + 5% CH4 CONVERSION CHART - VACUUM PRESSURE CONVERT FROM PASCAL (newtons/m 2 ) TORR (mm of mercury) ATM (atmosphere) Mbar (millibar) PSI (lb/in 2 ) PASCAL (newtons/m 2 ) 1 TORR (mm of mercury) 7.5 (10-3 ) (10 5 ) (10 3 ) Kg/cm (10 4 ) μ (micron) Mtorr (millitorr) ATM (atmosphere) 9.87 (10-6 ) 1.32 (10-3 ) CONVERT TO: MULTIPLY BY Mbar PSI (millibar) (lb/in 2 ) (10-4 ) (10-2 ) Kg/cm (10-5 ) 1.36 (10-3 ) (10-4 ) 6.8 (10-2 ) (10-2 ) 1.02 (10-3 ) (10-6 ) 1.33 (10-3 ) 1.93 (10-5 ) (10-6 ) μ (micron) Mtorr (millitorr) (10 5 ) (10 4 ) 7.35 (10 5 ) 1 10

11 THERMOCOUPLE GAUGE READOUTS, CONTROLLERS AND TUBES MODEL STANDARD RANGE TUBE POWER PRICE MODEL 45-MICRON to 1999 Microns VARIAN 531 BATTERY $364 MODEL 100-DV6-BATT 0 to 1999 Microns HASTINGS DV-6 BATTERY $364 MODEL 100TC-MICRON to 1999 Microns VARIAN VAC $344 MODEL 200TC-MICRON-531 ATM to 1 Micron VARIAN VAC $382 MODEL 100LED-760SW 0 to 760 Torr 760 Tube 115VAC $382 MODEL 100W-DV6-BATT 1.99 Torr to 1x10-3 Torr HASTINGS DV-6 BATTERY $354 MODEL 200TC-TORR Torr to 1x10-3 Torr VARIAN VAC $382 MODEL 22W-LCD 760 Torr to 1x10-3 Torr VARIAN VAC $354 DIRECT VARIAN AND HASTINGS REPLACEMENTS Panel Mount - Drop In Replacements 2.66" panel hole on 1.60" radius MODEL DVG Millitorr HASTINGS DV6/6R 115VAC $354 MODEL 801-W-TORR TORR VARIAN VAC $354 MODEL TORR TORR VARIAN VAC $382 All models include thermocouple gauge tube and cable(s) Optional: $199 NIST Traceable Calibration Certification Can Be Added To The Purchase Of The Above Units (Save $71) 45-MICRON TORR DV6-BATT DVG-6 REPLACEMENT THERMOCOUPLE GAUGE TUBES LDS LOW COST EQUIVALENT MFG MODEL LDS EQUIVALENT EACH MFG MODEL LDS EQUIVALENT EACH COOKE HHT-O TVT-1518 $43 F (531) VAC-VGT-500-DR $54 CVC GTC-004 TVT-1504 $48 F VAC-VGT-500-SS $81 VARIAN GTC-036 VAC-VGT-600-DR $60 F TVT-1504 $48 GRANVILLE VAC-VGT-400-DR $53 VR VAC-VGT-400-DR $53 DV-3M (Black) VAC-VGT-300-DR $74 DV-1M VAC-VGT-300-DR $74 HASTINGS DV-4D (Purple) VAC-VGT-700-DR $60 DV-4M VAC-VGT-700-DR $60 DV-6M (Yellow) VAC-VGT-400-DR $53 DV-6 VAC-VGT-400-DR $53 DV-23 (Orange) VAC-VGT-800-DR $71 VT-1 TVT-1518 $43 VEECO VAC-VGT-400-DR $53 VT-1M TVT-1504 $48 MKS TC-1 VAC-VGT-500-DR $54 VT-5 VAC-VGT-500-DR $54 ADD FLANGES TO YOUR THERMOCOUPLE TUBE VT-6 VAC-VGT-600-DR $60 NW16 or NW25 SERIES $ OD CONFLAT $31 VT-8 VAC-VGT-800-DR $71 NW40 or NW50 SERIES $ OD CONFLAT $36 WELCH 1515A VAC-VGT-800-DR $71 COMPOUND VACUUM/PRESSURE GAUGES TO NW FLANGE $92 NW CG $96 NW CG $104 NW CG $112 NW CG 30 Hg - 30 PSIG, 304 SS bourdon tube & connections, Easy to read dial CALIBRATION LABORATORY

12 TYPICAL GAUGE PRESSURE RANGES - TORR TYPE ATM BOURDON ATM TORR CAPACITANCE MANOMETER COLD CATHODE CONVECTRON DIAPHRAGM ION GAUGE - GLASS (Standard Range) ION GAUGE - GLASS (Broad-Range) ION GAUGE - NUDE (580 SERIES) ION GAUGE - NUDE (UHV-24 SERIES) PIRANI SPINNING ROTOR THERMOCOUPLE 2,000 TORR TORR Over-pressurization renders gauge inoperable (costly repair) ATM TORR 1500 TORR TORR ATM TORR ATM TORR 1x10-3 = 1 Micron 10-2 TORR TORR 1x10-3 TORR - 2x10-10 TORR Pressures Below 10-8 Use Conflat Flange Port 5x10-2 TORR - 4x10-10 TORR Ensure your controller can read broad-range gauge tubes 800 mtorr - 4X10-7 TORR 5x10-2 TORR - 4x10-10 TORR 1x10-3 TORR - 2x10-11 TORR Ion gauges are also called Hot Filament VARIAN STYLE NUDE IONIZATION GAUGES UHV-24 Nude Ion Gauge Tube - Bayard-Alpert Type E-Beam Degas, Cage Grid FLANGE FILAMENTS PART NUMBER Each Tube Equivalents 2.75 CONFLAT 2 Thoria-Coated Iridium Filaments Filament Replacement Assembly 2.75 CONFLAT 2-Tungsten Filaments Filament Replacement Assembly $ $ $ $ Nude Ion Gauge Tube - Bayard-Alpert Type Heated Grid Degas, Bifilar Grid Varian# Granville# Varian# Granville# FLANGE FILAMENT PART NUMBER Each Tube Equivalents 2.75 CONFLAT Thoria-Coated Iridium Filament L Filament Replacement Assembly Thoria-Coated NW40 Iridium Filament L Filament Replacement Assembly L $320 L $65 L $310 L $65 Varian# L Granville# Varian# L MINI NUDE - FOR USE WITH VARIAN LEAK DETECTORS Models: 947/948/960/DC-LC VAR-K $140 HOT FILAMENT TRIODE TUBE Tungsten Filament,.709" Nonex VAR $139 Iridium Filament,.709" Pyrex VAR $148 12

13 STANDARD RANGE ION GAUGE TUBES - UNCOATED CONNECTION FILAMENT(S) GLASS PART NUMBER PRICE VARIAN EQUIVALENT 3/4" Tungsten Nonex (Schott) $115 K Tubulation Arm (Dual) Kovar $130 K Series 1" Tungsten Nonex (Schott) $115 K Tubulation Arm (Dual) Kovar $130 K /4" Nonex (Schott) $124 K Iridium Tubulation Arm Kovar $132 K " Nonex (Schott) $124 K Iridium Tubulation Arm Kovar $ Series K NW25 Kovar NW25 $180 K NW40 Iridium Kovar NW40 $180 K " CF Kovar $180 K STANDARD RANGE ION GAUGE TUBES - PLATINUM COATED CONNECTION FILAMENT GLASS PART NUMBER PRICE VARIAN EQUIVALENT 3/4" Nonex (Schott) PC-SR $165 K Iridium Tubulation Arm Kovar PC-SR $184 K " Nonex (Schott) PC-SR $165 K Iridium Tubulation Arm Kovar PC-SR $ Series K NW25 Kovar PC-SR-NW25 $204 K NW40 Iridium Kovar PC-SR-NW40 $204 K " CF Kovar PC-SR-275 $211 K BROAD RANGE ION GAUGE TUBES - PLATINUM COATED CONNECTION FILAMENT(S) GLASS PART NUMBER PRICE VARIAN EQUIVALENT 1" Nonex (Schott) PC-BR $172 K Iridium Tubulation Arm Kovar PC-BR $195 K NW25 Kovar PC-BR-NW25 $218 K Series NW40 Iridium Kovar PC-BR-NW40 $218 K " CF Kovar PC-BR-275 $219 K " CF Dual IR Kovar PC-BR-275x2 $243 K SEALED ION GAUGE TUBES - UNCOATED CONNECTION FILAMENT(S) GLASS PART NUMBER PRICE VARIAN EQUIVALENT 3/4" Tubulation Arm Iridium Nonex (Schott) S $ K STANDARD RANGE SPECIFICATIONS Operating Pressure: 2x10-10 torr to 1x10-3 torr X-ray Limit: 2x10-10 torr Sensitivity: 10 torr -1 BROAD RANGE SPECIFICATIONS Operating Pressure: AIR: 4x10-10 torr to 5x10-2 torr Argon: 4x10-10 torr to 1x10-1 torr X-ray Limit: 4x10-10 torr Sensitivity: 6 torr -1 GLASS SPECIFICATIONS Nonex tubulation fits most quick couplings Kovar metal tubulation with a graded seal for stronger tubulation PLATINUM COATING Shields the gauge elements from electrostatic charges at low pressures and drains off the static charges that can build up at high pressures. UNCOATED ION GAUGE TUBE PLATINUM ION GAUGE TUBE GET MORE FROM YOUR ION GAUGE USE CONFLAT FLANGES AND COPPER GASKETS! Are you operating at a pressure below 10-8 torr? O-ring sealed compression ports limit the system pressure because of leakage and permeation. 13

14 ACCREDITED CALIBRATION SERVICES Certificate Number SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z LDS VACUUM PRODUCTS CALIBRATION Valid To: August 31, 2009 Certificate Number: Parameter Range Best Uncertainty 2 (±) Leak Rate 3 Helium (1x10-10 to ) scm 3 /s 2.7 % of reading Gas Leak Standards Other Gas Leak ( to ) scm 3 /s 20 % of reading Standard Gases High Vacuum & Ultra High Vacuum Gauges Ion and Cold Cathode Gauges ( to ) torr 3.5 % of reading Rough Vacuum Gauges Thermocouple, Pirani (1000 to ) torr 0.16 % of reading Gauges, Convection ( to ) torr 0.51 % of reading Gauges, Capacitance Manometers 2 Best Uncertainty is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards of nearly ideal measuring equipment. Best uncertainties represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The best uncertainty of a specific calibration performed by the laboratory may be greater than the best uncertainty due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 The range for this parameter is in standard cubic centimeters per second and is equivalent to one atmospheric cubic centimeters per second. VISIT LDSVACUUM.COM TO VIEW OUR SCOPE IN ITS ENTIRETY 14

15 VACUUM GAUGE CALIBRATION ALL BRANDS NIST Traceable Express and Repair Service Available Six points of calibration standard ADDITIONAL POINTS CAN BE PURCHASED HIGH & ULTRA HIGH VACUUM $275 - Single Filament Ion and Cold Cathode Gauges ROUGH VACUUM GAUGE $270 Capacitance Manometer Convectron Pirani Thermocouple CALIBRATION LABORATORY ALL BRANDS AND GASES Helium Calibration: $ Hour Service Available NIST Traceable GAS LEAK CALIBRATION REPAIR SERVICE ALL BRANDS Price: $ Includes refill, calibration and Certificate ALSO AVAILABLE Replacement Leak Elements Replacement Valves Refills CALIBRATION LABORATORY LDS PRIMARY STANDARDS ARE SENT DIRECTLY TO NIST NO 3RD PARTY CALIBRATION 15

16 DIFFUSION CALIBRATED GAS LEAKS For ALL BRANDS Of Leak Detectors and RGAs MANUFACTURED BY LDS FOR OVER 38 YEARS LDS NEW CALIBRATED LEAKS NIST Traceable Lifetime Warranty Specific Leak Rates Available All Styles and Fittings FREE Storage Case STANDARD 1-1/8 NW16 NW25 NW40 CALIBRATION LABORATORY OPTIONS and PORT SIZES Specific leak rates $100 NW16, NW25, NW40 Port NO CHARGE Conflat flange ports $99 For other ports not listed, consult the factory SPECIFY PORT CHOICE WHEN ORDERING DIFFUSION SERIES CALIBRATED GAS LEAKS A diffusion type leak is greatly affected by temperature. Most diffusion leaks change 3.6% per degree Celsius. Diffusion leaks will not clog cc/sec (HELIUM) SHUT-OFF VALVE TYPE PORT VARIAN VIC $690 X External 1-1/8" F NW25 $690 X External NW25 F X 10-9 cc/sec (HELIUM) SHUT-OFF VALVE TYPE PORT VARIAN VIC $640 X External 1-1/8" F NW25 $640 X External NW25 F X 10-8 cc/sec (HELIUM) SHUT-OFF VALVE TYPE PORT VARIAN VIC $480 X External 1-1/8" F NW25 $480 X External NW25 F X K $455 Internal NPT K X VIC $435 Internal CPC X cc/sec (HELIUM) SHUT-OFF VALVE TYPE PORT VARIAN ALCATEL V $505 X External 1-1/8" F X V-NW25 $505 X External NW25 F X K $455 Internal NPT K X ALC $530 Internal NW16 X ALC $530 Internal NW16 X ALC $455 Internal NW16 X ALC $640 X External NW25 X DIFFUSION STYLE 1-1/8 PORT 10-7 cc/second 10-8 cc/second 10-9 cc/second cc/second VARIAN STYLE INTERNAL K K ALCATEL STYLE INTERNAL NW16 PORT

17 CAPILLARY CALIBRATED GAS LEAKS For ALL BRANDS Of Leak Detectors and RGAs CAPILLARY SERIES CALIBRATED GAS LEAKS Capillary type leaks change very little with temperature and are recommended for applications where environmental temperature can not be controlled. In time, these leaks can clog cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $655 X 300 External 1-1/8" X $ External 1/2" TUBE OM S $ External SNIFFER TUBE X 10-6 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $655 X 300 External 1-1/8" X $ External 1/2" TUBE OM S $ External SNIFFER TUBE X 10-5 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $655 X 300 External 1-1/8" X $ External 1/2" TUBE OM S $ External SNIFFER TUBE X 10-4 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $655 X 300 External 1-1/8" X $ External 1/2" TUBE OM S $ External SNIFFER TUBE X 10-3 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $1,025 X 500 External 1-1/8" X $1,025 X 500 External 1/2" TUBE OM S $880 X 300 External SNIFFER TUBE X 10-2 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $1,025 X 500 External 1-1/8" X $1,025 X 500 External 1/2" TUBE ADJUSTABLE CALIBRATED GAS LEAKS 10-6 through 10-7 (HELIUM) VARIAN DR $765 X 10-5 through 10-6 (HELIUM) VARIAN DR $765 F ADJUSTABLE GAS LEAKS STANDARD FEATURES 150 cc cylinder Ashcroft Gauge Fits 1-1/8" OD or 1/4" NPT 3-Point calibration (1-low, 1-mid & 1- high) CAPILLARY STYLE 1-1/8 PORT 300 cc cylinder 10-5 through 10-6 (HELIUM) VARIAN NW25 $765 F through 10-5 (HELIUM) VARIAN DR $765 X 10-3 through 10-4 (HELIUM) VARIAN DR $765 X 10-2 through 10-3 (HELIUM) VARIAN DR $765 X CALIBRATION LABORATORY

18 VISIT LDS-VACUUM.COM FOR MORE FEEDTHROUGHS Power Electrical Signal Thermocouple FEEDTHROUGHS MADE TO ORDER Ordering Information Specify Wire Type and Gauge: Copper Stranded Copper Buss Copper/Constantan Chromel/Alumel Iron/Constantan Chromel/Constantan Specify Wire Gauge Specify Lengths (inches): Length Inside (vacuum) Length Outside (atmospheric) Wire Type and Gauge (stocked) Thermocouple: 24 gauge Copper: 28 to 12 gauge Special Orders Available Standard Temperature Range: -40 o F to 200 o F Consult factory for quotations on feedthroughs outside this temperature range Download And Fill Out Request For Quote Form At SERCOSEAL.COM HIGH TEMPERATURE FEEDTHROUGHS Standard feedthroughs include NPT UNF/Facial "O" ring and ISO-KF stainless steel bodies utilizing our hermetic sealing system. This system does not rely on epoxy for sealing, but employs a swaged elastomer gland. Solid or multi-strand copper conductors are available in sizes from 28 to 12 gauge. Standard thermocouple wire calibrations are stocked in 24 gauge with others available on special order. Teflon installation is used unless otherwise specified. Up to 92 conductors are available in a single feedthrough, depending on fitting and wire sizes. NPT Connection ISO-KF Flange UNF-Facial "O" Ring 18

19 Have CUSTOM CABLES Installed in Your Glovebox LDS Custom Glovebox Feedthroughs USB, VIDEO, RS232 & POWER Special Cable or Fitting? No Problem... Send LDS Your Cables or Fitting! (NW40 Fitting Standard) Fits Other Brand Gloveboxes Single & Dual Tubes NW TO SINGLE OR DUAL TUBE Part Number TYPE A B Price NW FT-ST Single Tube $90 NW FT-ST Single Tube $115 NW FT-DT Dual Tube $135 NW FT-DT Dual Tube $170 Liquid or Gas Applications - Custom Lengths Available BLANK PLUG FEEDTHROUGH Part Number Material Hole ID Plug ID Price FTB-075-B Brass $ FTB-075-S Stainless Steel $89 FTB-100-A Aluminum $56 FTB-100-B Brass $56 FTB-100-S Stainless Steel $89 FTB-125-B Brass $ FTB-125-S Stainless Steel $134 FTB-150-B Brass $ FTB-150-S Stainless Steel $141 FTB-175-B Brass $99 FTB-175-S Stainless Steel $160 NW TO BASEPLATE FEEDTHROUGH Part Number A B C Price NW FT $221 NW FT $239 ADDITIONAL FEEDTHROUGHS AVAILABLE ONLINE 19

20 NW FLANGES DIMENSIONS ALSO KNOWN AS QF OR KF ISO100 ISO80 VACUUM ESSENTIALS - COMBINING TO SAVE MORE! ISO63 NW50 NW40 NW25 NW16 LOOKING FOR NW10 FLANGES? Turn your NW10 into an NW16 by using an Adaptive Centering Ring - SEE PAGE 23 20

21 LOOK FOR VACUUM ESSENTIALS - RING AND CLAMP INCLUDED! CLAMPS - BULKHEAD PART NUMBER QUAN SALE BOLTS A B C NW BC EACH $13 NW16-BC-PK10 10 PACK $ NW BC EACH $15 NW25-BC-PK10 10 PACK $ NW BC EACH $17 NW40-BC-PK10 10 PACK $ NW BC EACH $ NW50-BC-PK10 10 PACK $190 Stainless bolts and washers included (10-32x5/8) CLAMPS - CNC MACHINED ALUMINUM PART NUMBER QUAN SALE A B Max PSI TUBE SIZE NW C EACH $11 NW16-C-PK10 10 PACK $100 NW C EACH $12 NW25-C-PK10 10 PACK $110 NW C EACH $13 NW40-C-PK10 10 PACK $120 NW C EACH $17 NW50-C-PK10 10 PACK $ & Stainless pins and stud, machined from solid bar CLAMPS STAINLESS STEEL PART NUMBER QUAN LIST SALE A B TUBE SIZE NW CSP EACH $43 $22 NW16-CSP-PK10 10 PACK $430 $200 NW CSP EACH $53 $27 NW25-CSP-PK10 10 PACK $530 $250 NW CSP EACH $63 $32 NW40-CSP-PK10 10 PACK $630 $300 NW CSP EACH $73 $ & NW50-CSP-PK10 10 PACK $730 $ Forged Stainless WING NUT ALUMINUM CLAMPS - ALL SIZES $4.95 PART NUMBER QUAN SALE A B C TUBE SIZE NW CW EACH $4.95 NW16-CW-PK10 10 PACK $ & 0.75 NOTE: NW16 CLAMPS CAN BE USED ON NW10 FLANGES NW CW EACH $4.95 NW25-CW-PK10 10 PACK $ NW CW EACH $4.95 NW40-CW-PK10 10 PACK $ NW CW EACH $ NW50-CW-PK10 10 PACK $45 Low cost aluminum die cast clamp VACUUM HARDWARE PRICED RIGHT! ISO SERIES CLAMPS - PAGE 43 21

22 CENTERING RINGS Aluminum or Stainless Buna-N: 100 o C Max Silicone: 200 o C Max Viton: 200 o C Max AR & SR SERIES No O-Ring SCREEN MESH 60 Holes Per Inch Viton is a registered trademark of DuPont Dow Elastomers CENTERING RINGS - ALL TYPES FLNG Material A B PART NUMBER SALE O-Ring REPLACEMENT O-RINGS NW10 NW16 NW25 NW40 NW50 NW SR-V $4 Viton NW OV $2 Stainless NW SR-S $4 Silicone NW OS $1 NW SR-B $4 Buna-N NW OB $1 X NW SR $4 NW AR-V $5 Viton NW OV $2 Aluminum NW AR-S $5 Silicone NW OS $1 NW AR-B $3 Buna-N NW OB $1 X NW AR $2 NW SR-V $4 Viton NW OV $2 Stainless NW SR-S $4 Silicone NW OS $1 NW SR-B $4 Buna-N NW OB $1 X NW SR $3 NW AR-V $5 Viton NW OV $2 Aluminum NW AR-S $5 Silicone NW OS $1 NW AR-B $3 Buna-N NW OB $1 X NW AR $2 NW SRV-SM $17 Viton NW OV $2 Mesh Screen Ring NW SRS-SM $17 Silicone NW OS $1 NW SRB-SM $17 Buna-N NW OB $1 NW SR-V $5 Viton NW OV $3 Stainless NW SR-S $5 Silicone NW OS $2 NW SR-B $5 Buna-N NW OB $1 X NW SR $4 NW AR-V $5 Viton NW OV $3 Aluminum NW AR-S $6 Silicone NW OS $2 NW AR-B $4 Buna-N NW OB $1 X NW AR $3 NW SRV-SM $19 Viton NW OV $3 Mesh Screen Ring NW SRS-SM $19 Silicone NW OS $2 NW SRB-SM $19 Buna-N NW OB $1 NW SR-V $6 Viton NW OV $3 Stainless NW SR-S $6 Silicone NW OS $2 NW SR-B $6 Buna-N NW OB $1 X NW SR $5 NW AR-V $7 Viton NW OV $3 Aluminum NW AR-S $8 Silicone NW OS $2 NW AR-B $5 Buna-N NW OB $1 X NW AR $4 NW SRV-SM $23 Viton NW OV $3 Mesh Screen Ring NW SRS-SM $23 Silicone NW OS $2 NW SRB-SM $23 Buna-N NW OB $1 NW SR-V $7 Viton NW OV $4 Stainless NW SR-S $7 Silicone NW OS $2 NW SR-B $7 Buna-N NW OB $1 X NW SR $6 NW AR-V $9 Viton NW OV $4 Aluminum NW AR-S $10 Silicone NW OS $2 NW AR-B $6 Buna-N NW OB $1 X NW AR $5 NW SRV-SM $25 Viton NW OV $4 Mesh Screen Ring NW SRS-SM $25 Silicone NW OS $2 NW SRB-SM $25 Buna-N NW OB $1 22

23 ADAPTIVE CENTERING RING WITH VITON O-RING - SS FLANGE Material PART NUMBER O-Ring A B C EACH NW10-16-ASR-V Viton Stainless NW10-16-ASR-S Silicone $5 NW10-16-ASR-B Buna-N NW10 NW10-16-AAR-V Viton TO NW16 Aluminum NW10-16-AAR-S Silicone $5 NW10-16-AAR-B Buna-N Use NW16 Series Clamps When Converting From NW10 NW20 TO NW25 Stainless Aluminum NW20-25-ASR-V NW20-25-ASR-S NW20-25-ASR-B NW20-25-AAR-V NW20-25-AAR-S NW20-25-AAR-B Viton Silicone Buna-N Viton Silicone Buna-N $ $7 Use NW25 Series Clamps When Converting From NW20 NW32 TO NW40 Stainless Aluminum NW32-40-ASR-V NW32-40-ASR-S NW32-40-ASR-B NW32-40-AAR-V NW32-40-AAR-S NW32-40-AAR-B Viton Silicone Buna-N Viton Silicone Buna-N $ $11 Viton is a registered trademark of DuPont Dow Elastomers Use NW40 Series Clamps When Converting From NW32 O-RING KITS - BUNA-N, SILICONE AND VITON KIT CONTENTS (5) NW10 (5) NW16 (5) NW25 (5) NW40 (5) NW50 PART NUMBER O-Ring Maximum Temperature EACH NW Buna-N 100 o C $15 V NW Viton 200 o C $50 S NW Silicone 200 o C $25 Silicone O-Rings Are Used In Chemical Applications OVER PRESSURE RINGS PART NUMBER MAX PSIG A B C SALE NW OPR* $5 NW OPR* $5 NW OPR* $5 NW OPR $5 Provides support for o-ring when operating above ATM *Not required when using NW16, NW25 or NW40 CNC Clamps OVER PRESSURE RING & CENTERING RING ASSEMBLY PART NUMBER O-Ring A B C SALE NW SRV-OPR Trapped Ring Viton $10 NW SRV-OPR Trapped Ring Viton $11 NW SRV-OPR Trapped Ring Viton $12 NW SRV-OPR Trapped Ring Viton $13 OVER PRESSURE RING ASSEMBLY WITH OPR AND CENTERING RING 23

24 ISO WELD FLANGES - PAGE 44 NW BLANK FLANGE - ALUMINUM & STAINLESS Use To Close Off Unused Ports FLNG PART NUMBER Material A SALE VACUUM ESSENTIALS NW10 NW AB Aluminum $4 NW10-AB-VE $ NW SB 304 S/S $5 NW10-SB-VE $12 NW16 NW AB Aluminum $4 NW16-AB-VE $ NW SB 304 S/S $5 NW16-SB-VE $12 NW25 NW AB Aluminum $5 NW25-AB-VE $ NW SB 304 S/S $5 NW25-SB-VE $13 NW40 NW AB Aluminum $8 NW40-AB-VE $ NW SB 304 S/S $8 NW40-SB-VE $16 NW50 NW AB Aluminum $8 NW50-AB-VE $ NW SB 304 S/S $8 NW50-SB-VE $17 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) UNBORED STUB FLANGE - ALUMINUM & STAINLESS Modify To Your Specs FLNG PART NUMBER Material A B SALE VACUUM ESSENTIALS NW16 NW UA Aluminum $6 NW16-UA-VE $ NW US 304 S/S $8 NW16-US-VE $15 NW25 NW UA Aluminum $7 NW25-UA-VE $ NW US 304 S/S $10 NW25-US-VE $18 NW40 NW UA Aluminum $9 NW40-UA-VE $ NW US 304 S/S $12 NW40-US-VE $22 NW50 NW UA Aluminum $12 NW50-UA-VE $ NW US 304 S/S $16 NW50-US-VE $26 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) WELD RING FLANGES STAINLESS STEEL TUBE SIZE PART NUMBER A B C Offset SALE VACUUM ESSENTIALS 0.75 NW RF $6 NW16-RF-VE $ NW RF $7 NW25-RF-VE $ NW RF $9 NW40-RF-VE $ NW RF $13 NW50-RF-VE $24 INTERNAL WELD, ACCEPTS STANDARD TUBING Wing Clamp (CW) & SS/Viton Centering Ring (SRV) VACUUM ESSENTIALS COMBINING PRODUCTS TO SAVE YOU EVEN MORE! 24

25 CONFLAT FLANGE WELD FITTINGS - PAGES BORED WELD FLANGE STAINLESS STEEL Traditional inch tube outer diameters FLANGE NW10 NW16 NW25 NW40 NW50 PART NUMBER BORE SIZE A B C SALE NW10-B $8 NW10-B $8 NW10-B $8 NW16-B $6 NW16-B $ NW16-B $6 NW16-B $6 NW25-B $7 NW25-B $7 NW25-B $7 NW25-B $7 NW25-B $7 NW40-B $9 NW40-B $9 NW40-B $ NW40-B $9 NW40-B $9 NW40-B $9 NW50-B $14 NW50-B $14 NW50-B $14 NW50-B $14 NW50-B $14 NW50-B $14 NW50-B $14 SHORT WELD STUB FLANGE PART TUBE MATERIAL A B C SALE NUMBER SIZE NW AS Aluminum $ NW SS 304 S/S $6 NW AS Aluminum $ NW SS 304 S/S $6 NW AS Aluminum $ NW SS 304 S/S $7 NW AS Aluminum $ NW SS 304 S/S $9 NW AS Aluminum $ NW SS 304 S/S $12 Butt weld flange, traditional inch tube diameters SHORT WELD FLANGE STAINLESS STEEL FIGURE I TUBE SIZE A B OFFSET C D SALE NW SF 0.50x $7 NW SF 0.75x $7 FIGURE II TUBE SIZE A B OFFSET C D SALE NW SF $7 NW SF $9 NW SF $13 Internal weld flange, accepts traditional tubing USE WELD FITTINGS TO MAKE YOUR OWN COMPONENTS - PG 66 25

26 AP12 & SP12 Fit Thermocouple Gauge Tubes Use with teflon tape or OC Series Thread Sealants Tapped to Female NPT Use with teflon tape or OC Series Thread Sealants NW FLANGE ADAPTOR TO FEMALE NPT FLNG NW16 NW25 NW40 NW50 FEMALE NPT A B MATERIAL PART NUMBER SALE VACUUM ESSENTIALS 1/ Aluminum NW AP12 $11 NW16-AP12-VE $19 Stainless NW SP12 $15 NW16-SP12-VE $23 1/ Aluminum NW AP25 $11 NW16-AP25-VE $19 Stainless NW SP25 $15 NW16-SP25-VE $23 1/ Aluminum NW AP12 $12 NW25-AP12-VE $21 Stainless NW SP12 $17 NW25-SP12-VE $26 1/ Aluminum NW AP25 $12 NW25-AP25-VE $21 Stainless NW SP25 $17 NW25-SP25-VE $26 1/ Stainless NW SP50 $23 NW25-SP50-VE $32 1/ Aluminum NW AP12 $13 NW40-AP12-VE $23 Stainless NW SP12 $23 NW40-SP12-VE $33 1/ Aluminum NW AP25 $13 NW40-AP25-VE $23 Stainless NW SP25 $23 NW40-SP25-VE $33 1/ Stainless NW SP50 $29 NW40-SP50-VE $39 3/ Stainless NW SP75 $29 NW40-SP75-VE $39 1/ Aluminum NW AP12 $17 NW50-AP12-VE $28 Stainless NW SP12 $30 NW50-SP12-VE $41 1/ Aluminum NW AP25 $17 NW50-AP25-VE $28 Stainless NW SP25 $30 NW50-SP25-VE $41 1/ Stainless NW SP50 $34 NW50-SP50-VE $45 3/ Stainless NW SP75 $34 NW50-SP75-VE $45 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) ADAPTIVE TEE TO FEMALE NPT FLNG FEMALE A B MATERIAL PART NUMBER SALE VACUUM ESSENTIALS NW16 1/8 Aluminum NW16x1/8NPT-AT $24 NW16x1/8-AT-VE $ NPT Stainless NW16x1/8NPT-ST $32 NW16x1/8-ST-VE $48 1/4 Aluminum NW16x1/4NPT-AT $25 NW16x1/4-AT-VE $ NPT Stainless NW16x1/4NPT-ST $33 NW16x1/4-ST-VE $49 NW25 1/8 Aluminum NW25x1/8NPT-AT $26 NW25x1/8-AT-VE $ NPT Stainless NW25x1/8NPT-ST $36 NW25x1/8-ST-VE $54 1/4 Aluminum NW25x1/4NPT-AT $27 NW25x1/4-AT-VE $ NPT Stainless NW25x1/4NPT-ST $37 NW25x1/4-ST-VE $55 NW40 1/8 Aluminum NW40x1/8NPT-AT $28 NW40x1/8-AT-VE $ NPT Stainless NW40x1/8NPT-ST $47 NW40x1/8-ST-VE $67 1/4 Aluminum NW40x1/4NPT-AT $29 NW40x1/4-AT-VE $ NPT Stainless NW40x1/4NPT-ST $48 NW40x1/4-ST-VE $68 NW50 1/8 Aluminum NW50x1/8NPT-AT $37 NW50x1/8-AT-VE $ NPT Stainless NW50x1/8NPT-ST $59 NW50x1/8-ST-VE $81 1/ NPT Aluminum NW50x1/4NPT-AT $38 NW50x1/4-AT-VE $60 Stainless NW50x1/4NPT-ST $59 NW50x1/4-ST-VE $81 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) OC Series Thread Sealants ON NPT ADAPTORS INSTEAD OF TEFLON TAPE Available On Page 4 26

27 NW to Male Pipe Adaptor Aluminum Made from one piece Low Cost Alternative 304 S/S Full hex Other Combinations Available NW TO MALE PIPE ADAPTOR - ALUMINUM FLNG PART NUMBER MALE HEIGHT THRU WRENCH NPT FLATS EACH VACUUM ESSENTIALS NW16 NW16x12NPT-A 1/ $23 NW16x12NPTA-VE $ NW16x25NPT-A 1/ $23 NW16x25NPTA-VE $31 NW25x12NPT-A 1/ $28 NW25x12NPTA-VE $ NW25x25NPT-A 1/ $28 NW25x25NPTA-VE $37 NW25 NW25x50NPT-A 1/ $28 NW25x50NPTA-VE $37 NW25x75NPT-A 3/ $28 NW25x75NPTA-VE $ NW25x100NPT-A $28 NW25x100NPTA-VE $37 NW40x12NPT-A 1/ $33 NW40x12NPTA-VE $ NW40x25NPT-A 1/ $33 NW40x25NPTA-VE $43 NW40x50NPT-A 1/ $33 NW40x50NPTA-VE $43 NW40 NW40x75NPT-A 3/ $33 NW40x75NPTA-VE $ NW40x100NPT-A $33 NW40x100NPTA-VE $43 NW40x125NPT-A 1-1/ $48 NW40x125NPTA-VE $ NW40x150NPT-A 1-1/ $48 NW40x150NPTA-VE $58 NW50x12NPT-A 1/ $43 NW50x12NPTA-VE $ NW50x25NPT-A 1/ $43 NW50x25NPTA-VE $54 NW50x50NPT-A 1/ $43 NW50x50NPTA-VE $54 NW50x75NPT-A 3/ $43 NW50x75NPTA-VE $ NW50 NW50x100NPT-A $43 NW50x100NPTA-VE $54 NW50x125NPT-A 1-1/ $58 NW50x125NPTA-VE $69 NW50x150NPT-A 1-1/ $58 NW50x150NPTA-VE $69 NW50x200NPT-A $58 NW50x200NPTA-VE $69 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) NW TO MALE PIPE ADAPTOR SS FLNG PART NUMBER MALE NPT A LIST SALE VACUUM ESSENTIALS NW16x12NPT 1/ $48 $36 NW16x12NPT-VE $44 NW16x25NPT 1/ $48 $38 NW16x25NPT-VE $46 NW16 NW16x38NPT 3/ $61 $50 NW16x38NPT-VE $58 NW16x50NPT 1/ $70 $58 NW16x50NPT-VE $66 NW16x75NPT 3/ $72 $63 NW16x75NPT-VE $71 NW25x12NPT 1/ $49 $37 NW25x12NPT-VE $46 NW25x25NPT 1/ $54 $40 NW25x25NPT-VE $49 NW25 NW25x38NPT 3/ $61 $43 NW25x38NPT-VE $52 NW25x50NPT 1/ $65 $43 NW25x50NPT-VE $52 NW25x75NPT 3/ $81 $57 NW25x75NPT-VE $66 NW25x100NPT $105 $70 NW25x100NPT-VE $79 NW40x12NPT 1/ $54 $39 NW40x12NPT-VE $49 NW40x25NPT 1/ $55 $42 NW40x25NPT-VE $52 NW40x38NPT 3/ $63 $44 NW40x38NPT-VE $54 NW40 NW40x50NPT 1/ $66 $45 NW40x50NPT-VE $55 NW40x75NPT 3/ $85 $76 NW40x75NPT-VE $86 NW40x100NPT $105 $72 NW40x100NPT-VE $82 NW40x125NPT 1-1/ $120 $81 NW40x125NPT-VE $91 NW40x150NPT 1-1/ $136 $89 NW40x150NPT-VE $99 NW50x12NPT 1/ $60 $43 NW50x12NPT-VE $54 NW50x25NPT 1/ $60 $46 NW50x25NPT-VE $57 NW50x38NPT 3/ $67 $48 NW50x38NPT-VE $59 NW50x50NPT 1/ $69 $49 NW50x50NPT-VE $60 NW50 NW50x75NPT 3/ $94 $64 NW50x75NPT-VE $75 NW50x100NPT $110 $76 NW50x100NPT-VE $87 NW50x125NPT 1-1/ $123 $85 NW50x125NPT-VE $96 NW50x150NPT 1-1/ $156 $98 NW50x150NPT-VE $109 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) 27

28 ISO ELBOWS - SEE PAGE o ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW E $50 $37 NW16-E45-VE $74 $50 NW E $55 $41 NW25-E45-VE $87 $57 NW E $84 $62 NW40-E45-VE $126 $79 NW E $90 $69 NW50-E45-VE $148 $89 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 90 o ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW E $45 $33 NW16-E90-VE $69 $46 NW E $50 $36 NW25-E90-VE $82 $49 NW E $70 $54 NW40-E90-VE $112 $70 NW E $89 $64 NW50-E90-VE $147 $84 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 90 o MITER ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW E90M 1.57 $53 $33 NW16-E90M-VE $77 $44 NW E90M 1.97 $54 $37 NW25-E90M-VE $86 $48 NW E90M 2.56 $72 $50 NW40-E90M-VE $114 $65 NW E90M 3.17 $93 $62 NW50-E90M-VE $151 $82 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 90 o LONG RADIUS ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW E90-LR 2.70 $73 $49 NW16-E90-LR-VE $97 $65 NW E90-LR 3.64 $78 $54 NW25-E90-LR-VE $110 $72 NW E90-LR 5.12 $99 $74 NW40-E90-LR-VE $141 $96 NW E90-LR 5.52 $115 $89 NW50-E90-LR-VE $173 $111 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 180 o ELBOWS STAINLESS STEEL PART NUMBER A B LIST SALE VACUUM ESSENTIALS LIST SALE NW E $78 $39 NW16-E180-VE $102 $55 NW E $83 $45 NW25-E180-VE $115 $63 NW E $105 $60 NW40-E180-VE $147 $80 NW E $130 $77 NW50-E180-VE $188 $99 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 90 o REDUCING ELBOWS STAINLESS STEEL 304 STAINLESS STEEL FLNG FLNG PART NUMBER SALE VACUUM ESSENTIALS LIST SALE 1 2 NW25x16-E90 NW25 $43 NW25x16-E90-VE $71 $60 NW40x16-E90 NW16 NW40 $60 NW40x16-E90-VE $93 $78 NW50x16-E90 NW50 $75 NW50x16-E90-VE $116 $94 NW40x25-E90 NW40 $63 NW40x25-E90-VE $100 $82 NW25 NW50x25-E90 NW50 $78 NW50x25-E90-VE $123 $98 NW50x40-E90 NW40 NW50 $81 NW50x40-E90-VE $139 $102 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) CONFLAT FLANGED ELBOWS - SEE PAGE 59 28

29 NW TEES STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW T 1.57 $73 $52 NW16-T-VE $109 $73 NW T 2.01 $83 $66 NW25-T-VE $131 $87 NW T 2.40 $96 $73 NW40-T-VE $159 $96 NW T 3.15 $132 $94 NW50-T-VE $219 $122 3-Wing Clamps (CW) & 3-SS/Viton Centering Rings (SRV) NW REDUCING TEES STAINLESS STEEL PART NUMBER A B LIST SALE VACUUM ESSENTIALS LIST SALE NW25x16-T $75 $51 NW25x16-T-VE $119 $75 NW40x16-T $88 $56 NW40x16-T-VE $142 $81 NW40x25-T $115 $67 NW40x25-T-VE $173 $94 NW50x16-T $110 $71 NW50x16-T-VE $180 $98 NW50x25-T $120 $78 NW50x25-T-VE $194 $106 NW50x40-T $135 $83 NW50x40-T-VE $214 $111 3-Wing Clamps (CW) & 3-SS/Viton Centering Rings (SRV) ISO TO NW REDUCING TEES STAINLESS STEEL FLANGE TUBE FLANGE TUBE PART NUMBER A B PRICE 1&2 OD 3 OD ISO63xNW40-T NW $170 ISO ISO63xNW50-T NW $178 ISO80xNW40-T NW $198 ISO ISO80xNW50-T NW $208 ISO100xNW40-T NW $216 ISO ISO100xNW50-T NW $229 CONTACT LDS FOR OTHER COMBINATIONS CF TO NW REDUCING TEES STAINLESS STEEL CF FLANGE IS ROTATABLE FLANGE TUBE FLANGE TUBE PART NUMBER A B PRICE 1&2 OD 3 OD 275xNW16-RWT NW $ CF xNW25-RWT NW $ xNW40-RWT NW $ CF xNW50-RWT NW $ xNW40-RWT NW $ CF xNW50-RWT NW $335 CONTACT LDS FOR OTHER COMBINATIONS LDS IS YOUR SURPLUS GAUGE HEADQUARTERS SYSTEM CALIBRATION SERVICE ALSO AVAILABLE CALIBRATION LABORATORY MORE SURPLUS ITEMS ADDED DAILY! SURPLUS ITEMS ARE WHILE SUPPLIES LAST 29

30 ISO CROSSES - SEE PAGE 47 4-WAY CROSS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW X 1.59 $105 $75 NW16-X-VE $153 $102 NW X 2.01 $125 $85 NW25-X-VE $189 $116 NW X 2.58 $150 $110 NW40-X-VE $234 $144 NW X 3.16 $200 $130 NW50-X-VE $316 $168 4-Wing Clamps (CW) & 4-SS/Viton Centering Rings (SRV) 5-WAY CROSS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW X 1.50 $175 $140 NW16-5X-VE $235 $164 NW X 2.05 $195 $156 NW25-5X-VE $275 $186 NW X 2.42 $220 $176 NW40-5X-VE $325 $212 NW X 3.17 $290 $232 NW50-5X-VE $435 $269 5-Wing Clamps (CW) & 5-SS/Viton Centering Rings (SRV) 6-WAY CROSS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW X 1.57 $195 $156 NW16-6X-VE $267 $186 NW X 2.05 $220 $176 NW25-6X-VE $316 $218 NW X 2.42 $265 $212 NW40-6X-VE $391 $249 NW X 3.17 $415 $332 NW50-6X-VE $589 $368 6-Wing Clamps (CW) & 6-SS/Viton Centering Rings (SRV) REDUCING CROSSES STAINLESS STEEL PART NUMBER A B LIST SALE VACUUM ESSENTIALS LIST SALE NW25x16-X $125 $70 NW25x16-X-VE $181 $104 NW40x16-X $145 $91 NW40x16-X-VE $211 $124 NW40x25-X $155 $98 NW40x25-X-VE $229 $129 NW50x16-X $195 $123 NW50x16-X-VE $277 $158 NW50x25-X $200 $126 NW50x25-X-VE $290 $161 NW50x40-X $205 $130 NW50x40-X-VE $305 $164 4-Wing Clamps (CW) & 4-SS/Viton Centering Rings (SRV) CONFLAT FLANGED CROSSES - SEE PAGE 60 Veeco Style Filaments - TF91 ( ) Box of 5 filaments Everyday Price: $160 TESCOM PRESSURE REGULATOR Inlet Pressure: 500 PSIG Outlet Pressure: PSIG Gauge ports - 3/8" NPT List: $576 - Sale: $99 SURPLUS# 051 Pressure Decay Standards 1.0, 2.0, 2.5 or 3.0 psig (air) Everyday Price: $535 LDS IS YOUR SPARE PARTS HEADQUARTERS! 30

31 ISO TO NW REDUCING CROSS STAINLESS STEEL PART NUMBER A B FLANGE 1&2 TUBE OD FLANGE 3 TUBE OD PRICE ISO63xNW40-X NW $189 ISO ISO63xNW50-X NW $206 ISO80xNW40-X NW $246 ISO ISO80xNW50-X NW $272 ISO100xNW40-X NW $297 ISO ISO100xNW50-X NW $306 CONTACT LDS FOR OTHER COMBINATIONS CF TO NW REDUCING CROSS STAINLESS STEEL CF FLANGES ARE ROTATABLE PART NUMBER A B FLANGE 1&2 TUBE OD FLANGE 3 TUBE OD PRICE 275xNW16-RWX NW $ CF xNW25-RWX NW $ xNW40-RWX NW $ CF xNW50-RWX NW $ xNW40-RWX NW $ CF xNW50-RWX NW $456 CONTACT LDS FOR OTHER COMBINATIONS VIEWPORTS - KODIAL GLASS PART NUMBER A B C D E Viewing Area PRICE NW ZVP $140 NW ZVP $140 NW ZVP $145 NW ZVP $170 Optical discs are Kodial glass (alkali borosilicate 7056) Bakeout to 200 F due to elastomeric fluorocarbon o-ring seal (heating rate should not exceed 2-3 per minute) PLASTIC COVERS - PROTECT YOUR FLANGES! PART NUMBER DESCRIPTION PRICE NW16-PC Plastic Cap -Fits NW10 & NW16 Flanges $.50 NW25-PC Plastic Cap -Fits NW25 Flanges $.50 NW40-PC Plastic Cap -Fits NW40 Flanges $.50 NW50-PC Plastic Cap -Fits NW50 Flanges $.50 Protect your flanges from scratches and nicks with PROTECTIVE PLASTIC COVERS LARGE RENTAL FLEET - WE RENT EVERYTHING! MAKE YOUR OWN CROSSES - USE WELD BODIES PAGE 67 LDS RENTS DRY LEAK DETECTORS TOO - SEE PAGE 76 31

32 NW to Female VCR NW to Male VCR VCR is a registered trademark of Cajon Company VCR NW TO FEMALE OR MALE VCR FLANGE TUBE SIZE A FEMALE VCR SALE MALE VCR SALE NW16 NW25 NW40 NW50 VCR 1/8" 0.85 NW16x12VCR $44 NW16x12VCR-M $44 1/4" 1.36 NW16x25VCR $47 NW16x25VCR-M $47 3/8" 1.88 NW16x38VCR $55 NW16x38VCR-M $55 1/2" 1.88 NW16x50VCR $67 NW16x50VCR-M $67 1/8" 0.85 NW25x12VCR $49 NW25x12VCR-M $49 1/4" 1.36 NW25x25VCR $52 NW25x25VCR-M $52 3/8" 1.55 NW25X38VCR $59 NW25X38VCR-M $59 1/2" 1.55 NW25x50VCR $66 NW25x50VCR-M $66 3/4" 2.15 NW25x75VCR $120 NW25x75VCR-M $110 1" 2.27 NW25x100VCR $140 NW25x100VCR-M $130 1/8" 0.85 NW40x12VCR $55 NW40x12VCR-M $55 1/4" 1.36 NW40x25VCR $56 NW40x25VCR-M $56 3/8" 1.55 NW40x38VCR $64 NW40x38VCR-M $64 1/2" 1.55 NW40x50VCR $69 NW40x50VCR-M $69 3/4" 2.05 NW40x75VCR $125 NW40x75VCR-M $115 1" 2.27 NW40x100VCR $140 NW40x100VCR-M $130 1/8" 0.85 NW50x12VCR $56 NW50x12VCR-M $56 1/4" 1.36 NW50x25VCR $61 NW50x25VCR-M $61 3/8" 1.55 NW50x38VCR $69 NW50x38VCR-M $69 1/2" 1.55 NW50x50VCR $74 NW50x50VCR-M $74 3/4" 2.05 NW50x75VCR $125 NW50x75VCR-M $115 1" 2.26 NW50x100VCR $140 NW50x100VCR-M $130 GASKETS - COPPER PART NUMBER Description Fits VCR Sizes Each CU-12VCR VCR Copper Gasket 1/8 VCR $2.50 CU-25VCR VCR Copper Gasket 1/4 VCR $2.50 CU-50VCR VCR Copper Gasket 3/8 or 1/2 VCR $2.50 CU-75VCR VCR Copper Gasket 3/4 VCR $4.00 CU-100VCR VCR Copper Gasket 1 VCR $5.00 STYLE GLANDS - LONG TUBE BUTT WELD PART NUMBER Description Tube Size Each 25VCR-LTBW VCR Weld Gland 1/4" $8 38VCR-LTBW VCR Weld Gland 3/8" $10 50VCR-LTBW VCR Weld Gland 1/2" $10 STYLE NUTS S/S MALE AND FEMALE VCR PART NUMBER Description Fits VCR Sizes Each 25VCRM-NUT Male VCR Nut $3 1/4 25VCR-NUT Female VCR Nut $4 50VCRM-NUT Male VCR Nut $6 3/8 or 1/2 50VCR-NUT Female VCR Nut $7 GAS LEAKS MANUFACTURED BY LDS NIST TRACEABLE CERTIFICATION ALWAYS INCLUDED ALL TYPES DIFFUSION, CAPILLARY SEE PAGES

33 NW TO FEMALE OR MALE VCO FLANGE TUBE SIZE A FEMALE VCO SALE MALE VCO SALE NW to Female VCO NW to Male VCO VCO is a registered trademark of Cajon Company Swagelok is a registered trademark of Crawford Fitting Company NW16 NW25 NW40 NW50 1/8" 0.93 NW16x12VCO $46 NW16x12VCO-M $46 1/4" 0.82 NW16x25VCO $49 NW16x25VCO-M $49 3/8" 0.96 NW16x38VCO $56 NW16x38VCO-M $56 1/2" 0.96 NW16x50VCO $79 NW16x50VCO-M $69 1/8" 0.93 NW25x12VCO $49 NW25x12VCO-M $49 1/4" 0.82 NW25x25VCO $54 NW25x25VCO-M $54 3/8" 0.86 NW25X38VCO $62 NW25X38VCO-M $62 1/2" 0.86 NW25x50VCO $76 NW25x50VCO-M $66 3/4" 1.09 NW25x75VCO $120 NW25x75VCO-M $110 1" 1.13 NW25x100VCO $139 NW25x100VCO-M $129 1/8" 0.93 NW40x12VCO $55 NW40x12VCO-M $55 1/4" 0.82 NW40x25VCO $58 NW40x25VCO-M $58 3/8" 0.86 NW40x38VCO $67 NW40x38VCO-M $67 1/2" 0.86 NW40x50VCO $81 NW40x50VCO-M $71 3/4" 0.99 NW40x75VCO $125 NW40x75VCO-M $115 1" 1.03 NW40x100VCO $139 NW40x100VCO-M $129 1/8" 0.93 NW50x12VCO $59 NW50x12VCO-M $59 1/4" 0.82 NW50x25VCO $63 NW50x25VCO-M $63 3/8" 0.86 NW50x38VCO $71 NW50x38VCO-M $71 1/2" 0.86 NW50x50VCO $87 NW50x50VCO-M $77 3/4" 0.99 NW50x75VCO $125 NW50x75VCO-M $115 1" 1.03 NW50x100VCO $141 NW50x100VCO-M $131 NW TO SWAGELOK FLANGE TUBE SIZE A PART NUMBER SALE VACUUM ESSENTIALS 1/8" 1.28 NW16x12SWG $41 NW16x12SWG-VE $48 NW16 1/4" 1.55 NW16x25SWG $44 NW16x25SWG-VE $51 3/8" 1.68 NW16x38SWG $49 NW16x38SWG-VE $56 1/2" 1.97 NW16x50SWG $61 NW16x50SWG-VE $68 1/8" 1.28 NW25x12SWG $45 NW25x12SWG-VE $54 1/4" 1.55 NW25x25SWG $48 NW25x25SWG-VE $57 NW25 3/8" 1.63 NW25x38SWG $56 NW25x38SWG-VE $65 1/2" 1.97 NW25x50SWG $59 NW25x50SWG-VE $68 3/4" 2.03 NW25x75SWG $105 NW25x75SWG-VE $112 1" 2.50 NW25x100SWG $124 NW25x100SWG-VE $132 1/8" 1.28 NW40x12SWG $49 NW40x12SWG-VE $58 1/4" 1.55 NW40x25SWG $51 NW40x25SWG-VE $60 NW40 3/8" 1.63 NW40x38SWG $59 NW40x38SWG-VE $68 1/2" 1.97 NW40x50SWG $64 NW40x50SWG-VE $73 3/4" 1.94 NW40x75SWG $105 NW40x75SWG-VE $113 1" 2.50 NW40x100SWG $128 NW40x100SWG-VE $136 1/8" 1.28 NW50x12SWG $53 NW50x12SWG-VE $63 1/4" 1.55 NW50x25SWG $56 NW50x25SWG-VE $66 NW50 3/8" 1.63 NW50x38SWG $64 NW50x38SWG-VE $74 1/2" 1.97 NW50x50SWG $68 NW50x50SWG-VE $78 3/4" 1.94 NW50x75SWG $110 NW50x75SWG-VE $120 1" 2.52 NW50x100SWG $128 NW50x100SWG-VE $138 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) OVER 3500 VACUUM ITEMS ONLINE - LDSVACUUM.COM 33

34 ISO NIPPLES - SEE PAGE 44 WIRE REINFORCED PVC TUBING PART NUMBER ID LIST SALE PART NO. EACH 050-PVC-WR 0.50 $5 $4 050-HC $2 075-PVC-WR 0.75 $5 $4 075-HC $2 100-PVC-WR 1.00 $7 $5 100-HC $2 150-PVC-WR 1.50 $12 $9 150-HC $3 200-PVC-WR 2.00 $14 $ HC $3 TUBING ONLY, PER FOOT HOSE CLAMP NW TO WIRE REINFORCED PVC TUBING PART NUMBER LENGTH FLANGE VACUUM PRICE LIST SALE ID ESSENTIALS NW16-PVC $70 NW16-PVC24-VE $97 $ NW16-PVC $82 NW16-PVC48-VE $106 $98 NW25-PVC $78 NW25-PVC24-VE $116 $ NW25-PVC $96 NW25-PVC48-VE $128 $114 NW40-PVC $95 NW40-PVC24-VE $141 $ NW40-PVC $125 NW40-PVC48-VE $172 $145 NW50-PVC $130 NW50-PVC24-VE $198 $ NW50-PVC $160 NW50-PVC48-VE $223 $182 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) Wire reinforced PVC Tubing (clear), Stainless long butt flanges used, hose clamped on flange, Ready to use - Helium leak checked, available in custom lengths HOSE ADAPTOR - ALUMINUM PART NUMBER A B HOSE SIZE (ID) LIST SALE NW H or 0.62 $11 $7 NW H or 0.75 $11 $7 NW H or 0.75 $17 $11 NW H or 0.75 $18 $13 NW H or 0.87 Does not work with 1 Hose $13 $9 NW H or 1.62 $18 $11 NW H or 1.62 $24 $14 Compatible with standard vacuum hose bores used with rubber or plastic hose HOSE ADAPTOR - STAINLESS PART NUMBER A B C HOSE SIZE (ID) LIST SALE NW SH $20 $15 NW SH $25 $19 NW SH $30 $22 NW SH $38 $27 One piece - NO WELDS CUSTOM FLANGES AND COMPONENTS! CUSTOM FLANGES AND COMPONENTS! LDS supplies custom flanges, components and manifolds to your specifications at LOW PRICES and FAST TURNAROUND! 34

35 MATERIAL Aluminum LONG BUTT FLANGE TUBE SIZE B C PART NUMBER EACH VACUUM ESSENTIALS NW ALF $6 NW16-5-ALF-VE $ NW ALF $6 NW16-7-ALF-VE $ NW ALF $8 NW25-ALF-VE $ NW ALF $10 NW40-ALF-VE $ NW ALF $11 NW50-ALF-VE $22 Machined from solid bar No welds Butt weld Helium leak tested Custom Lengths Available Stainless NW LF $13 NW10-LF-VE $ NW LF $10 NW16-50-LF-VE $ NW LF $10 NW16-75-LF-VE $ NW LF $12 NW25-LF-VE $ NW LF $14 NW40-LF-VE $ NW LF $20 NW50-LF-VE $31 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) HALF NIPPLE STAINLESS STEEL TUBE SIZE A B C PART NUMBER EACH VACUUM ESSENTIALS NW HN $10 NW16-HN-VE $ NW HN $12 NW25-HN-VE $ NW HN $14 NW40-HN-VE $ NW HN $20 NW50-HN-VE $31 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) NIPPLES STAINLESS STEEL FLANGE TUBE A SIZE (OAL) PART NUMBER SALE VACUUM ESSENTIALS NW NW NS $28 NW16-NS-VE $ NW NL $33 NW16-NL-VE $48 NW NW NS $32 NW25-NS-VE $ NW NL $37 NW25-NL-VE $53 NW NW NS $40 NW40-NS-VE $ NW NL $47 NW40-NL-VE $65 NW NW NS $49 NW50-NS-VE $ NW NL $55 NW50-NL-VE $76 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) VISIT OUR WEBSITE OFTEN FOR GREAT NEW SURPLUS DEALS SURPLUS# 625 List Price: $3639 Surplus Price: $2739 Edwards Model RV CFM NW25 Connections 58 LBS. 115V, 50/60 Hz, 1-ph Supplied With: INLET FILTER Gas Ballast Factory Warranty Ultragrade 19 oil NW clamp and ring Electrical supply cable Manual 35

36 BELLOWS & FLEXIBLE METAL HOSE STAINLESS CUSTOM FLEXHOSE LENGTH AVAILABLE FLNG PART NUMBER LENGTH WALL LIST SALE VACUUM ESSENTIALS NW F 4.0 $85 $45 NW16-F-VE $61 NW MH $105 $56 NW16-MH10-VE $72 NW MH $170 $91 NW16-MH20-VE $ NW MH $205 $115 NW16-MH30-VE $131 NW16 NW MH $215 $169 NW16-MH36-VE $185 NW MH $255 $148 NW16-MH40-VE $164 NW MH $270 $188 NW16-MH48-VE $204 NW MH $433 $284 NW16-MH80-VE $300 NW MH $649 $372 NW16-MH120-VE $388 NW F 4.0 $115 $46 NW25-F-VE $64 NW MH $133 $71 NW25-MH10-VE $89 NW MH $165 $112 NW25-MH18-VE $ NW MH $180 $96 NW25-MH20-VE $114 NW25 NW MH $200 $132 NW25-MH30-VE $150 NW MH $245 $148 NW25-MH40-VE $166 NW MH $250 $204 NW25-MH48-VE $222 NW MH $441 $321 NW25-MH80-VE $339 NW MH $659 $398 NW25-MH120-VE $416 NW F 4.0 $150 $57 NW40-F-VE $77 NW MH $176 $90 NW40-MH10-VE $110 NW MH $193 $108 NW40-MH15-VE $127 NW MH $230 $115 NW40-MH20-VE $ NW MH $250 $152 NW40-MH24-VE $172 NW40 NW MH $270 $148 NW40-MH30-VE $168 NW MH $295 $162 NW40-MH36-VE $182 NW MH $300 $183 NW40-MH40-VE $203 NW MH $345 $238 NW40-MH48-VE $258 NW MH80T $546 $398 NW40-MH80T-VE $418 NW MH120T $765 $458 NW40-MH120T-VE $478 NW F 4.0 $110 $68 NW50-F-VE $89 NW MH $165 $95 NW50-MH10-VE $115 NW MH $265 $114 NW50-MH20-VE $ NW MH $301 $170 NW50-MH30-VE $190 NW50 NW MH $330 $236 NW50-MH36-VE $256 NW MH $345 $232 NW50-MH40-VE $252 NW MH48T 48.0 $380 $262 NW50-MH48T-VE $282 NW MH80T $584 $442 NW50-MH80T-VE $462 NW MH120T $879 $478 NW50-MH120T-VE $498 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) REDUCING FLEXHOSE STAINLESS STEEL REDUCING FLEXHOSE PART NUMBER LENGTH ID FLANGE A FLANGE B PRICE NW50x40-MH $ NW40 NW50 NW50x40-MH $160 NW50x25-MH $ NW25 NW50 NW50x25-MH $160 NW50x16-MH $ NW16 NW50 NW50x16-MH $160 NW40x25-MH $ NW25 NW40 NW40x25-MH $150 NW40x16-MH $ NW16 NW40 NW40x16-MH $150 NW25x16-MH $ NW16 NW25 NW25x16-MH $145 36

37 NW to NW REDUCERS (REDUCING NIPPLES) SS Contact LDS For Special Length Reducers PART NUMBER FLANGE 1 FLANGE 2 NW25 A LIST SALE VACUUM ESSENTIAL NW25X16 $40 $28 NW25X16-VE $45 NW40X16 NW16 NW $60 $29 NW40X16-VE $47 NW50X16 NW50 $52 $31 NW50X16-VE $50 NW40X25 NW40 $45 $30 NW40X25-VE $49 NW NW50X25 NW50 $55 $32 NW50X25-VE $52 NW50X40 NW40 NW $57 $35 NW50X40-VE $56 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) NW to NW REDUCERS (REDUCING NIPPLES) SS Conical Reducer Contact LDS For Special Length Reducers Conical Reducer PART NUMBER FLANGE 1 FLANGE 2 NW25 A LIST SALE VACUUM ESSENTIAL NW25x16-CR $61 $28 NW25x16-CR-VE $45 NW40x16-CR NW16 NW $66 $29 NW40x16-CR-VE $47 NW50x16-CR NW50 $75 $31 NW50x16-CR-VE $50 NW40x25-CR NW40 $68 $30 NW40x25-CR-VE $49 NW NW50x25-CR NW50 $72 $32 NW50x25-CR-VE $52 NW50x40-CR NW40 NW $77 $35 NW50x40-CR-VE $56 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) NW to ISO REDUCERS SS FLANGE FLANGE PART NUMBER A B SALE VACUUM ESSENTIAL 1 2 NW16xISO63 NW16 ISO $98 NW16xISO63-VE $143 NW25xISO63 ISO63 $99 NW25xISO63-VE $145 NW25xISO80 NW25 ISO $120 NW25xISO80-VE $166 NW25xISO100 ISO100 $130 NW25xISO100-VE $176 NW40xISO63 ISO $99 NW40xISO63-VE $146 NW40xISO80 ISO $112 NW40xISO80-VE $159 NW NW40xISO100 ISO $135 NW40xISO100-VE $182 NW40xISO160 ISO $175 NW40xISO160-VE $253 NW50xISO63 ISO $99 NW50xISO63-VE $147 NW50xISO80 ISO $119 NW50xISO80-VE $167 NW50xISO100 NW50 ISO $135 NW50xISO100-VE $183 NW50xISO160 ISO $185 NW50xISO160-VE $264 NW50xISO200 ISO $205 NW50xISO200-VE $301 Aluminum Double Claw Clamps, 1-Wing Clamp (CW) & 2-SS/Viton Centering Rings (SRV) NW to ISO REDUCERS SS FLANGE FLANGE PART NUMBER A B C SALE 1 2 NW40xISO63-CR ISO $108 NW40xISO80-CR NW40 ISO $123 NW40xISO100-CR ISO $135 NW50xISO63-CR ISO $109 NW50xISO80-CR NW50 ISO $128 NW50xISO100-CR ISO $135 CONTACT LDS FOR ALTERNATE COMBINATIONS 37

38 NW TO CF FLANGE ADAPTORS PART NUMBER FLANGE A FLANGE B TYPE TUBE OD TYPE BOLT HOLES A B C PRICE NW16x CF $40 NW16x CF $65 NW16x CF $46 NW16x338 NW CF $105 NW16x CF $128 NW16x CF $134 NW16x CF $149 ISO TO CONFLAT REDUCERS - SEE PAGE 45 NW25x CF $42 NW25x CF $65 NW25x CF $48 NW25x338 NW CF $ NW25x CF $128 NW25x CF $134 NW25x CF $149 NW40x CF $49 NW40x CF $65 NW40x CF $52 NW40x338 NW CF $105 NW40x CF $128 NW40x CF $134 NW40x CF $149 NW50x CF $63 NW50x CF $65 NW50x CF $70 NW50x338 NW CF $105 NW50x CF $ NW50x CF $134 NW50x CF $149 Other combinations available - Consult the factory NW TO CF FLANGE CONICAL ADAPTORS FLANGE A FLANGE B PART NUMBER A B C PRICE TYPE TUBE OD TYPE TUBE OD 212xNW16-CR 212 CF $64 NW xNW16-CR 275 CF $65 133xNW25-CR 133 CF $55 275xNW25-CR NW CF $68 338xNW25-CR 338 CF $90 133xNW40-CR 133 CF $58 212xNW40-CR 212 CF $67 338xNW40-CR NW CF $96 450xNW40-CR 450 CF $ xNW40-CR 462 CF $ xNW50-CR 212 CF $69 275xNW50-CR 275 CF $70 450xNW50-CR NW CF $ xNW50-CR 462 CF $ xNW50-CR 600 CF $156 Other combinations available - Consult the factory 38

39 USE WITH Tube Connections Vacuum Gauges Compression Type Buna o-ring 304 Stainless Steel MAKE YOUR OWN PAGE 69 NW TO QUICK COUPLING STAINLESS STEEL FLANGE PART NUMBER TUBE A B PRICE VACUUM ESSENTIALS NW16-Q06 1/ $52 NW16-Q06-VE $60 NW16-Q12 1/ $52 NW16-Q12-VE $60 NW16-Q18 3/ $52 NW16-Q18-VE $60 NW16 NW16-Q25 1/ $52 NW16-Q25-VE $60 NW16-Q31 5/ $60 NW16-Q31-VE $68 NW16-Q38 3/ $60 NW16-Q38-VE $68 NW16-Q50 1/ $60 NW16-Q50-VE $68 NW16-Q75 3/ $66 NW16-Q75-VE $74 NW25-Q06 1/ $63 NW25-Q06-VE $72 NW25-Q12 1/ $63 NW25-Q12-VE $72 NW25-Q18 3/ $63 NW25-Q18-VE $72 NW25-Q25 1/ $63 NW25-Q25-VE $72 NW25-Q31 5/ $63 NW25-Q31-VE $72 NW25 NW25-Q38 3/ $63 NW25-Q38-VE $72 NW25-Q50 1/ $63 NW25-Q50-VE $72 NW25-Q62 5/ $64 NW25-Q62-VE $73 NW25-Q75 3/ $67 NW25-Q75-VE $76 NW25-Q87 7/ $76 NW25-Q87-VE $85 NW25-Q $80 NW25-Q100-VE $89 NW25-Q / $87 NW25-Q112-VE $96 NW40-Q06 1/ $68 NW40-Q06-VE $78 NW40-Q12 1/ $68 NW40-Q12-VE $78 NW40-Q18 3/ $68 NW40-Q18-VE $78 NW40-Q25 1/ $68 NW40-Q25-VE $78 NW40-Q31 5/ $68 NW40-Q31-VE $78 NW40-Q38 3/ $68 NW40-Q38-VE $78 NW40-Q50 1/ $68 NW40-Q50-VE $78 NW40 NW40-Q62 5/ $71 NW40-Q62-VE $81 NW40-Q75 3/ $71 NW40-Q75-VE $81 NW40-Q87 7/ $82 NW40-Q87-VE $92 NW40-Q $82 NW40-Q100-VE $92 NW40-Q / $109 NW40-Q112-VE $119 NW40-Q / $135 NW40-Q125-VE $145 NW40-Q / $150 NW40-Q138-VE $160 NW40-Q / $155 NW40-Q150-VE $165 NW50-Q06 1/ $77 NW50-Q06-VE $88 NW50-Q12 1/ $77 NW50-Q12-VE $88 NW50-Q18 3/ $77 NW50-Q18-VE $88 NW50-Q25 1/ $77 NW50-Q25-VE $88 NW50-Q31 5/ $77 NW50-Q31-VE $88 NW50 NW50-Q38 3/ $77 NW50-Q38-VE $88 NW50-Q50 1/ $77 NW50-Q50-VE $88 NW50-Q75 3/ $82 NW50-Q75-VE $93 NW50-Q $92 NW50-Q100-VE $103 NW50-Q / $120 NW50-Q112-VE $131 NW50-Q / $172 NW50-Q150-VE $183 NW50-Q $185 NW50-Q200-VE $196 1-Wing Clamp (CW) & 1-SS/Viton Centering Ring (SRV) LEAK DETECTOR TEST PORT ADAPTOR PART NUMBER PORT A LIST SALE VACUUM ESSENTIALS NW LD 1-1/ $58 $36 NW16-112LD-VE $44 NW LD 1-1/ $58 $36 NW25-112LD-VE $45 NW LD 1-1/ $63 $40 NW40-112LD-VE $50 NW LD 1-1/ $69 $43 NW50-112LD-VE $54 1-Wing Clamp (CW) & 1-SS/Viton Centering Ring (SRV) 39

40 FEATURES OF LDS ISO (LARGE FLANGE) COMPONENTS ISO CLAMP FLANGE (ISO-K, ISO & LF) FLANGE TUBING (OD X WALL) A (O.D.) ISO x (95) ISO x (110) ISO x (130) ISO x (180) ISO x (240) ISO x (290) ISO320 ISO400 ISO x (PIPE) x (PIPE) x (PIPE) (370) (450) (550) B (THICKNESS) 0.47 (12) CLAMPS (RECOMMENDED) ISO BOLTED FLANGE (ISO-F, ISO-B & LFB) FLANGE C BOLT D E F Wrench (O.D.) HOLES (THICKNESS) (BOLT CIRCLE) (BOLT HOLES) (mm) 3-4 ISO-B (130) (12) ISO-B (12) (145) (12) ISO-B (12) (165) ISO-B (12) (225) (12) (16) ISO-B (12) (285) (16) ISO-B (12) (335) (16) ISO-B (17) (425) (20) ISO-B (17) (510) (20) ISO-B (17) (610) (20) 4.33 (110) 4.92 (125) 5.71 (145) 7.87 (200) (260) (310) (395) (480) (580) 0.35 (9) 0.35 (9) 0.35 (9) 0.43 (11) 0.43 (11) 0.43 (11) 0.55 (14) 0.55 (14) 0.55 (14) ISO flanges are sexless, infinitely rotatable, self-centering, and available for either internal or butt welding. ISO-B (bolted) flanges are sexless, self-centering, available for either internal or butt welding, and if bolted to a rotatable bolt ring (which contain an ISO style flange) can be infinitely rotatable. Helium leak checked: less than 1x10-9 standard cc/second Flange interface dimensions are made to ISO standards and are interchangeable with all components made to these standards. Custom configurations are available and made to the same exacting requirements as standard components. Call our engineering staff to discuss your special needs. ISO-B FLANGES USE STANDARD CENTERING RINGS - SEE PAGE 42 PLASTIC CAPS - ISO SERIES PART NUMBER FLANGE SIZE $1 ISO63-PC Fits ISO63 Claw Clamp Style Fittings and Flanges $1 ISO80-PC Fits ISO80 Claw Clamp Style Fittings and Flanges $1 ISO100-PC Fits ISO100 Claw Clamp Style Fittings and Flanges $1 ISO160-PC Fits ISO160 Claw Clamp Style Fittings and Flanges $1 ISO200-PC Fits ISO200 Claw Clamp Style Fittings and Flanges $2 ISO250-PC Fits ISO250 Claw Clamp Style Fittings and Flanges $3 PROTECT YOUR FLANGES FROM NICKS AND SCRATCHES 40

41 BOLTED BLANKS STAINLESS STEEL PART NUMBER A B HOLES LIST SALE BOLT KIT ISO-B SB $83 $55 ISOB63-BD $5 ISO-B SB $115 $68 ISOB80/100-BD $11 ISO-B SB $127 $80 ISOB80/100-BD $11 ISO-B SB $240 $204 ISOB160-BD $20 ISO-B SB $300 $255 ISOB200/250-BD $31 ISO-B SB $445 $430 ISOB200/250-BD $31 BOLTED WELD FLANGES STAINLESS STEEL PART NUMBER TUBE A B C LIST SALE BOLT KIT ISO-B SF $78 $50 ISOB63-BD $5 ISO-B SF $115 $68 ISOB80/100-BD $11 ISO-B SF $125 $80 ISOB80/100-BD $11 ISO-B SF $240 $204 ISOB160-BD $20 ISO-B SF $300 $255 ISOB200/250-BD $31 ISO-B SF $370 $320 ISOB200/250-BD $31 Internal Weld, Self Aligning, Accepts Standard Inch Tubing, Use Bolts to Tighten BOLTED HALF NIPPLES STAINLESS STEEL PART NUMBER TUBE A B C HOLES PRICE BOLT KIT ISO-B LF $127 ISOB63-BD $5 ISO-B LF $149 ISOB80/100-BD $11 ISO-B LF $165 ISOB80/100-BD $11 ISO-B LF $240 ISOB160-BD $20 ISO-B LF $315 ISOB200/250-BD $31 ISO-B LF $375 ISOB200/250-BD $31 Contact LDS for special lengths DOUBLE FLANGE BOLT KITS PART NUMBER BOLT SIZE # PER SET LIST SALE ISOB63-BD M8x40 4 $6 $5 ISOB80/100-BD M8x40 8 $13 $11 ISOB160-BD M10x50 8 $22 $20 ISOB200/250-BD M10x50 12 $33 $31 ISOB320-BD M12x60 12 $52 $47 ISOB400/500-BD M12x60 16 $65 $56 Fastens ISOB flanges ROTATABLE BOLT RING WITH SPLIT RETAINING RING ROTATABLE BOLT RING SPLIT RETAINING RING PART NUMBER OD THICK LIST SALE PART NUMBER THICK LIST SALE ISO RBR-SS $145 $40 ISO RR-SS $27 $8 ISO RBR-SS $155 $55 ISO RR-SS $32 $8 ISO RBR-SS $175 $75 ISO RR-SS $32 $8 ISO RBR-SS $350 $105 ISO RR-SS $34 $10 ISO RBR-SS $385 $225 ISO RR-SS $39 $20 For use with ISO Flange to create bolted rotatable configurations OD and bolt pattern match bolted flange RBR-SS Includes Split Retaining Ring (RR-SS) 41

42 CENTERING RINGS Aluminum or Stainless Buna-N: 100 o C Max Silicone: 200 o C Max Viton: 200 o C Max AOR Aluminum Outer Ring SCREEN MESH 28 Holes Per Inch Viton is a registered trademark of DuPont Dow Elastomers CENTERING RINGS - ALL TYPES FLNG A B ISO63 ISO80 ISO100 ISO160 ISO200 ISO250 ISO Stainless Centering With Aluminum Outer Ring O-Ring Provided Aluminum Centering With Aluminum Outer Ring ISO SR-V $25 Viton ISO AR-V $20 ISO SR-S $30 Silicone ISO AR-S $25 ISO SR-B $30 Buna-N ISO AR-B $25 MESH SCREEN RING O-RING O-RING REPLACEMENTS ISO SRV-SM $97 Viton ISO OV $4 ISO SRS-SM $102 Silicone ISO OS $2 ISO SRB-SM $102 Buna-N ISO OB $1 Aluminum Outer Ring (only) ISO AOR $5 ISO SR-V $25 Viton ISO AR-V $25 ISO SR-S $30 Silicone ISO AR-S $28 ISO SR-B $30 Buna-N ISO AR-B $28 MESH SCREEN RING O-RING O-RING REPLACEMENTS ISO SRV-SM $115 Viton ISO OV $5 ISO SRS-SM $120 Silicone ISO OS $2 ISO SRB-SM $120 Buna-N ISO OB $1 Aluminum Outer Ring (only) ISO AOR $5 ISO SR-V $25 Viton ISO AR-V $25 ISO SR-S $30 Silicone ISO AR-S $30 ISO SR-B $30 Buna-N ISO AR-B $30 MESH SCREEN RING O-RING O-RING REPLACEMENTS ISO SRV-SM $135 Viton ISO OV $9 ISO SRS-SM $140 Silicone ISO OS $3 ISO SRB-SM $140 Buna-N ISO OB $1 Aluminum Outer Ring (only) ISO AOR $5 ISO SR-V $50 Viton ISO AR-V $34 ISO SR-S $55 Silicone ISO AR-S $39 ISO SR-B $55 Buna-N ISO AR-B $39 MESH SCREEN RING O-RING O-RING REPLACEMENTS ISO SRV-SM $170 Viton ISO OV $15 ISO SRS-SM $175 Silicone ISO OS $4 ISO SRB-SM $175 Buna-N ISO OB $2 Aluminum Outer Ring (only) ISO AOR $5 ISO SR-V $70 Viton ISO AR-V $40 ISO SR-S $75 Silicone ISO AR-S $45 ISO SR-B $75 Buna-N ISO AR-B $45 Aluminum Outer Ring (only) ISO AOR $8 Viton O-Ring Replacement ISO OV $16 Silicone O-Ring Replacement ISO OS $5 Buna O-Ring Replacement ISO OB $3 ISO SR-V $85 Viton ISO AR-V $60 ISO SR-S $93 Silicone ISO AR-S $68 ISO SR-B $93 Buna-N ISO AR-B $68 Aluminum Outer Ring (only) ISO AOR $8 Viton O-Ring Replacement ISO OV $17 Silicone O-Ring Replacement ISO OS $6 Buna O-Ring Replacement ISO OB $4 ISO SR-V $180 Viton ISO AR-V $112 ISO SR-S $190 Silicone ISO AR-S $122 ISO SR-B $190 Buna-N ISO AR-B $122 Aluminum Outer Ring (only) ISO AOR $15 Viton O-Ring Replacement ISO OV $29 Silicone O-Ring Replacement ISO OS $12 Buna O-Ring Replacement ISO OB $5 42

43 CENTERING RINGS Aluminum or Stainless Buna-N: 100 o C Max Viton: 200 o C Max Silicone: 200 o C Max Silicone O-Rings Used In Chemical Applications Viton is a registered trademark of DuPont Dow Elastomers Single Claw Close Off Unused Ports Double Claw Double Claw S/S ISO SERIES RINGS - ALL TYPES FLNG A B ISO400 ISO Stainless Centering With Aluminum Outer Ring O-Ring Provided Aluminum Centering With Aluminum Outer Ring ISO SR-V $485 Viton ISO AR-V $198 ISO SR-S $498 Silicone ISO AR-S $208 ISO SR-B $498 Buna-N ISO AR-B $208 Aluminum Outer Ring (only) ISO AOR $15 Viton O-Ring Replacement ISO OV $31 Silicone O-Ring Replacement ISO OS $14 Buna O-Ring Replacement ISO OB $7 ISO SR-V $1300 Viton ISO AR-V $315 ISO SR-S $1250 Silicone ISO AR-S $290 ISO SR-B $1250 Buna-N ISO AR-B $250 Viton O-Ring Replacement ISO OV $44 Silicone O-Ring Replacement ISO OS $16 Buna O-Ring Replacement ISO OB $10 ISO CLAW CLAMPS - ALL TYPES SINGLE CLAW CLAMP, ALUMINUM A B C D FLANGE SIZES PART NUMBER SALE , 80, 100 ISO63/100-C $ , 200, 250 ISO160/250-C $ , 400, 500 ISO320/500-C $5 DOUBLE CLAW CLAMP, ALUMINUM A B C FLANGE SIZES PART NUMBER SALE , 80, 100 ISO63/100-DC $ , 200, 250 ISO160/250-DC $ , 400, 500 ISO320/500-DC $6 DOUBLE CLAW CLAMP, STAINLESS A B C FLANGE SIZES PART NUMBER SALE , 80, 100, 160, 200, 250 ISO-DC-S $ , 400, 500 ISO320/500-DC-S $14 ISO BLANK FLANGE - ALUMINUM OR STAINLESS PART NUMBER MATERIAL A B LIST SALE ESSENTIALS CLAMPS LIST SALE ISO AB Aluminum $43 $28 ISO63-AB-VE $121 $ ISO SB Stainless $55 $38 ISO63-SB-VE $133 $73 ISO AB Aluminum $57 $36 ISO80-AB-VE $151 $ ISO SB Stainless $72 $49 ISO80-SB-VE $166 $84 ISO AB Aluminum $63 $40 ISO100-AB-VE $155 $ ISO SB Stainless $83 $56 ISO100-SB-VE $175 $92 ISO AB Aluminum $100 $56 ISO160-AB-VE $215 $ ISO SB Stainless $110 $70 ISO160-SB-VE $235 $129 ISO AB Aluminum $145 $92 ISO200-AB-VE $303 $ ISO SB Stainless $176 $129 ISO200-SB-VE $334 $209 ISO AB Aluminum $185 $116 ISO250-AB-VE $365 $ ISO SB Stainless $230 $184 ISO250-SB-VE $410 $279 Aluminum Double Claw Clamps (DC) & 1-SS/Viton Centering Ring (SRV) ISO SB Stainless $998 $480 ISO320-SB-VE 8 $1505 $680 ISO SB Stainless $1100 $495 ISO400-SB-VE 8 $1422 $699 ISO SB Stainless $1973 $930 ISO500-SB-VE 12 $2466 $1269 Aluminum Double Claw Clamps (DC) & 1-Aluminum/Viton Centering Ring (ARV) 43

44 Contact LDS For Custom Lengths SHORT WELD FLANGE - ALUMINUM OR STAINLESS PART NUMBER MATERIAL LIST SALE TUBE OD STUB WELD FLANGE - ALUMINUM PART NUMBER A B LIST SALE ESSENTIALS Clamps LIST SALE ISO AS $56 $42 ISO63-AS-VE 4 $134 $79 ISO AS $70 $52 ISO80-AS-VE 4 $164 $89 ISO AS $73 $67 ISO100-AS-VE 4 $165 $104 ISO AS $105 $80 ISO160-AS-VE 4 $230 $144 ISO AS $170 $124 ISO200-AS-VE 6 $328 $222 Aluminum Double Claw Clamps (DC) & 1-SS/Viton Centering Ring (SRV) Butt Weld Aluminum Accepts Standard Inch Tubing Infinitely Rotatable Use Clamps Or Rotatable Bolt Ring ISO HALF NIPPLE STAINLESS PART NUMBER A B C LIST SALE ESSENTIALS Clamps LIST SALE ISO LF $110 $67 ISO63-LF-VE 4 $188 $100 ISO LF $121 $71 ISO80-LF-VE 4 $215 $104 ISO LF $132 $88 ISO100-LF-VE 4 $224 $121 ISO LF $176 $109 ISO160-LF-VE 4 $301 $169 ISO LF $250 $161 ISO200-LF-VE 6 $408 $236 ISO LF $451 $243 ISO250-LF-VE 6 $631 $323 Aluminum Double Claw Clamps (DC) & 1-SS/Viton Centering Ring (SRV) Butt Weld 304 Stainless Accepts Standard Inch Tubing ISO FULL NIPPLE STAINLESS PART NUMBER A FLANGES LIST SALE ESSENTIALS Clamps LIST SALE ISO NS 4.18 $200 $132 ISO63-NS-VE $356 $198 ISO63 8 ISO NL 6.92 $210 $140 ISO63-NL-VE $366 $206 ISO NS 4.18 $240 $152 ISO80-NS-VE $428 $218 ISO80 8 ISO NL 7.72 $250 $160 ISO80-NL-VE $438 $226 ISO NS 4.18 $255 $164 ISO100-NS-VE $439 $230 ISO100 8 ISO NL 8.50 $265 $172 ISO100-NL-VE $449 $238 ISO NS 4.18 $395 $248 ISO160-NS-VE $645 $369 ISO160 8 ISO NL $415 $264 ISO160-NL-VE $665 $384 ISO NS 4.18 $525 $372 ISO200-NS-VE $841 $522 ISO ISO NL $560 $384 ISO200-NL-VE $876 $534 ISO NS 4.18 ISO250 $705 $482 ISO250-NS-VE 12 $1065 $642 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) A THRU HOLE B C OFFSET D ISO SF Stainless $55 $37 ISO ASF Aluminum $43 $ ISO SF Stainless $67 $44 ISO ASF Aluminum $54 $ ISO SF Stainless $72 $48 ISO ASF Aluminum $60 $ ISO SF Stainless $105 $69 ISO ASF Aluminum $100 $ ISO SF Stainless $170 $102 ISO ASF Aluminum $150 $ ISO SF Stainless $215 $158 ISO ASF Aluminum $175 $ ISO SF Stainless $998 $ ISO SF Stainless $1100 $ ISO SF Stainless $1863 $ USE WITH TUBE END FLANGES TO MAKE ELBOWS, TEES AND CROSSES 44

45 ISO to ISO REDUCERS (REDUCING NIPPLES) S/S PART NUMBER FLANGE 1 FLANGE 2 TUBE OD A B SALE ISO63xISO80 ISO80 $175 ISO63xISO100 ISO63 ISO $190 ISO63xISO160 ISO160 $240 ISO80xISO100 ISO80 ISO $240 ISO100xISO160 ISO100 ISO $270 ISO160xISO200 ISO200 $345 ISO ISO160xISO250 ISO250 $419 ISO200xISO250 ISO200 ISO $519 CONICAL REDUCER FLANGE 1 FLANGE 2 A B C SALE ISO63xISO80-CR ISO $190 ISO63xISO100-CR ISO63 ISO $200 ISO63xISO160-CR ISO $270 ISO80 ISO100-CR ISO80 ISO $150 ISO80xISO160-CR ISO $340 ISO100xISO160-CR ISO100 ISO $245 ISO TO CONFLAT REDUCERS (REDUCING NIPPLES) S/S PART NUMBER FLANGE 1 FLANGE 2 TUBE OD A B PRICE ISO63x450 ISO CF $193 ISO80x CF $221 ISO ISO80x CF $245 ISO100x600 ISO CF $254 ISO160x800 ISO CF $405 ISO200x1000 ISO CF $605 ALTERNATE CONFIGURATIONS AVAILABLE ISO TO CONFLAT REDUCERS (REDUCING NIPPLES) S/S Contact LDS For Additional Sizes PART NUMBER FLANGE 1 FLANGE 1 FLANGE 2 FLANGE 2 CONFLAT TUBE OD TUBE OD A PRICE 275xISO63-CR ISO $ CF xISO80-CR ISO $ xISO63-CR ISO $ xISO80-CR 3.38 CF 2.00 ISO $ xISO100-CR ISO $ xISO80-CR ISO $ CF xISO100-CR ISO $ xISO63-CR ISO $ CF xISO100-CR ISO $ xISO63-CR ISO $ CF xISO80-CR ISO $260 ISO TO FLEXIBLE METAL HOSE STAINLESS Contact LDS For Additional Sizes PART NUMBER HOSE ID A B WALL LIST SALE ISO F $270 $205 ISO MH $295 $236 ISO MH $395 $336 ISO F $330 $255 ISO MH $325 $260 ISO MH $445 $376 ISO F $380 $280 ISO MH $475 $380 ISO MH $625 $540 ISO F $550 $480 ISO F $1000 $880 ISO TO NW REDUCERS - PAGE 37 45

46 45 o ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO E $230 $160 ISO63-E45-VE 8 $386 $210 ISO E $255 $165 ISO80-E45-VE 8 $443 $220 ISO E $290 $229 ISO100-E45-VE 8 $474 $284 ISO E $560 $459 ISO160-E45-VE 8 $810 $593 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) MITRED ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO E90M 3.46 $195 $143 ISO63-E90M-VE 8 $351 $193 ISO E90M 3.86 $235 $176 ISO80-E90M-VE 8 $423 $231 ISO E90M 4.25 $264 $180 ISO100-E90M-VE 8 $448 $235 ISO E90M 5.43 $473 $365 ISO160-E90M-VE 8 $723 $498 ISO E90M 6.61 $580 $522 ISO200-E90M-VE 12 $896 $672 ISO E90M 8.19 $1350 $1215 ISO250-E90M-VE 12 $1710 $1395 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) 90 o ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO E $205 $145 ISO63-E90-VE 8 $361 $195 ISO E $255 $152 ISO80-E90-VE 8 $443 $207 ISO E $270 $161 ISO100-E90-VE 8 $454 $216 ISO E $570 $480 ISO160-E90-VE 8 $820 $620 ISO E $595 $510 ISO200-E90-VE 12 $911 $660 ISO E $850 $705 ISO250-E90-VE 12 $1210 $885 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) TEES STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO T 3.25 $290 $195 ISO63-T-VE 12 $524 $290 ISO T 3.50 $390 $219 ISO80-T-VE 12 $672 $314 ISO T 4.13 $400 $219 ISO100-T-VE 12 $676 $324 ISO T 5.25 $610 $525 ISO160-T-VE 12 $985 $690 ISO T 7.25 $1015 $805 ISO200-T-VE 18 $1489 $1057 ISO T 9.75 $1575 $1123 ISO250-T-VE 18 $2115 $1413 Aluminum Double Claw Clamps (DC) & 3-SS/Viton Centering Rings (SRV) ISO REDUCING TEE STAINLESS STEEL PART NUMBER FLANGE TUBE FLANGE TUBE 1&2 OD 3 OD A B LIST SALE ISO80xISO63-T ISO ISO $415 $239 ISO100xISO63-T ISO $325 $249 ISO ISO100xISO80-T ISO $365 $279 ISO160xISO63-T ISO $450 $398 ISO160xISO80-T ISO ISO $490 $420 ISO160xISO100-T ISO $650 $490 ISO200xISO63-T ISO $872 $772 ISO200xISO100-T ISO ISO $939 $839 ISO200xISO160-T ISO $980 $885 CONTACT LDS FOR ALTERNATE CONFIGURATIONS 46

47 4-WAY CROSSES STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO X 3.25 $385 $255 ISO63-X-VE 16 $567 $385 ISO X 3.50 $560 $420 ISO80-X-VE 16 $936 $556 ISO X 4.13 $627 $425 ISO100-X-VE 16 $995 $569 ISO X 5.25 $1078 $860 ISO160-X-VE 16 $1578 $1097 ISO X 7.25 $2090 $1335 ISO200-X-VE 24 $2722 $1675 ISO X 9.75 $2750 $1788 ISO250-X-VE 24 $3470 $2180 Aluminum Double Claw Clamps (DC) & 4-SS/Viton Centering Rings (SRV) 5-WAY CROSSES STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO X $615 $515 ISO63-5X1-VE 20 $1005 $700 ISO X 3.50 $780 $680 ISO80-5X-VE 20 $1250 $965 ISO X $890 $790 ISO100-5X1-VE 20 $1350 $1075 Aluminum Double Claw Clamps (DC) & 5-SS/Viton Centering Rings (SRV) 6-WAY CROSSES STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO X $715 $615 ISO63-6X1-VE 24 $1183 $825 ISO X 3.50 $915 $815 ISO80-6X-VE 24 $1479 $1025 ISO X $980 $880 ISO100-6X1-VE 24 $1532 $1090 Aluminum Double Claw Clamps (DC) & 6-SS/Viton Centering Rings (SRV) ISO REDUCING CROSS STAINLESS STEEL PART NUMBER FLANGE TUBE FLANGE TUBE 1&2 OD 3 &4 OD A B LIST SALE ISO80xISO63-X ISO ISO $415 $315 ISO100xISO63-X ISO $475 $375 ISO ISO100xISO80-X ISO $560 $460 ISO160xISO63-X ISO $660 $590 ISO160xISO80-X ISO ISO $790 $682 ISO160xISO100-X ISO $835 $753 ISO200xISO160-X ISO ISO $1225 $1105 ISO TO QUICK COUPLING STAINLESS STEEL PART NUMBER TUBE SIZE A SALE VACUUM ESSENTIALS CLAMPS SALE ISO63xQ $128 ISO63xQ100-VE $158 ISO63xQ $152 ISO63xQ112-VE $182 4 ISO63xQ $184 ISO63xQ125-VE $214 ISO63xQ $255 ISO63xQ200-VE $285 ISO80xQ $140 ISO80xQ100-VE $170 ISO80xQ $164 ISO80xQ112-VE $194 4 ISO80xQ $204 ISO80xQ150-VE $234 ISO80xQ $270 ISO80xQ200-VE $299 ISO100xQ $152 ISO100xQ100-VE $182 ISO100xQ $208 ISO100xQ125-VE $238 4 ISO100xQ $224 ISO100xQ150-VE $254 ISO100xQ $285 ISO100xQ200-VE $315 Aluminum Double Claw Clamps (DC) & 1-SS/Viton Centering Ring (SRV) CUSTOM CONFIGURATIONS AVAILABLE 47

48 CONFLAT FLANGE - REFERENCE CHART FLANGE LDS VARIAN DIN EUROPEAN HOLES EQUIVALENT REFERENCE REFERENCE REFERENCE REFERENCE 1.33 OD NW16CF DN16CF CF OD NW25CF 2.75 OD NW35CF DN35CF CF35, CF38, CF OD NW50CF 4.50 OD NW63CF DN63CF CF63, CF OD NW75CF 6.00 OD NW100CF DN100CF CF OD NW130CF 8.00 OD NW150CF DN150CF CF150, CF OD NW200CF DN200CF CF OD NW250CF DN250CF CF OD NW275CF OD DN300 CF OD OD DN350 CF350 Operation and Applications: LDS CF flanges offer superior leak-free performance for vacuum applications requiring 1x10-13 torr or higher and temperature ranges from -196 o C to +500 o C. Each flange face has an identical knife edge. These flanges are tightened together with a copper gasket between them to form an extremely reliable leak tight seal. CF flanges are especially designed for ultra-high vacuum. The CF flange system is superior for applications requiring very clean environments, high temperatures and for the containment of toxic, corrosive or radioactive gases. ROTATABLE NON-ROTATABLE GASKET Information on Assembly, Hardware and Accessories: LDS offers all hardware necessary to assemble CF flanges and fittings. The copper gasket is captured between mating CF flanges. Gaskets are made from high-purity, oxygen free 1 /4 hard copper which is de-burred, chemically treated and individually packaged. COPPER GASKETS HEX-HEAD BOLTS BOLT KIT 12-POINT BOLTS Reusable Viton Gaskets: 1x10-8 torr Temperature range from -70 o C up to 50 o C (Intermittent use to 200 o C) LDS offers high tensile stainless bolts, washers and nuts. These are available in standard versions and 12 point (dodecagon) style. Bakeout: For high temperature bakeouts, use either LDS high temperature thread lubricant or LDS silver plated 12-point bolts to prevent galling and seizing. See Page 54 Maximum torque requirements to generate vacuum tight seals: 1.33 O.D. (Mini ) 5 ft/lbs OD 16 ft/lbs OD 26 ft/lbs. Note: Over-torquing can result in broken bolts Plate Nuts: LDS plate nuts as the most convenient way of mating flanges. These plate nuts allow two adjacent bolts to be coupled to a single nut piece. A must for areas where accessibility is limited and reduced access does not allow enough clearance for tools. Conflat is a registered trademark of Varian Associates Viton is a registered trademark of DuPont Dow Elastomers 48

49 NON-ROTATABLE 1.33 CF ROTATABLE 1.33 CF 1.33 OD CONFLAT FLANGES 6-BOLT HOLES THROUGH HOLES (6), NON-ROTATABLE PART NUMBER A B C DIAMETER PRICE $ $ $ $ $10 WN = Weld Neck WNB = Weld neck, No.060 weld prep WN $ WNB $ WN $ WNB $14 THROUGH HOLES (6), ROTATABLE R $ R $ R $ R $ R $11 WN = Weld Neck WNB = Weld neck, No.060 weld prep R-WN $ R-WNB $ R-WN $ R-WNB $15 TAPPED HOLES (6), NON-ROTATABLE PART NUMBER A B C THREAD PRICE T $ T $ T $ T $ T $19 WN = Weld Neck WNB = Weld neck, No.060 weld prep WN-T $ WNB-T $ WN-T $ WNB-T $21 TAPPED HOLES (6), ROTATABLE R-T $ R-T $ R-T $ R-T $ R-T $24 WN = Weld Neck WNB = Weld neck, No.060 weld prep R-WN-T $ R-WNB-T $ R-WN-T $ R-WNB-T $24 HARDWARE AND SEALS OD CF 133-BK 6 Bolt, Nut & Washers $4 133-PN 3 Plate Nuts Thru Hole CF $3 133-PNK 3 Plate Nuts, 6 Bolt/Washers $7 133-BT 6 Bolt/Washers Tapped Hole $5 133-VG 5 Viton Gaskets $ CG 10 Copper Gaskets All 1.33 OD CF $ PC 10 Copper Gaskets $

50 2.12 OD CONFLAT FLANGES 4-BOLT HOLES NON-ROTATABLE, (4) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $ $ $ $18 ROTATABLE, (4) THROUGH HOLES R $ R $ R $ R $ R $19 NON-ROTATABLE, (4) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /4-28 $ T /4-28 $ T /4-28 $ T /4-28 $ T /4-28 $27 ROTATABLE, (4) TAPPED HOLES R-T /4-28 $ R-T /4-28 $ R-T /4-28 $ R-T /4-28 $ R-T /4-28 $27 HARDWARE AND SEALS FOR 2.12 OD CONFLAT FLANGE 212-BK (4) BOLT, NUT & WASHER KIT $4 Thru Hole CF 212-BK-12 (4) 12-PT BOLT & NUT KIT $5 212-BT (4) BOLT & WASHER KIT $5 Tapped Hole CF 212-BT12 (4) 12-PT BOLTS & WASHER KIT $5 212-VG (5) VITON GASKETS 212-CG (10) COPPER GASKETS All 2.12 OD CF $18 Protect your flanges from scratches and nicks with PROTECTIVE PLASTIC COVERS 12-PT-WRN 12-POINT WRENCH $12 PLASTIC COVERS - PROTECT YOUR FLANGES PART NUMBER DESCRIPTION PRICE 133-PC Fits 1.33 Mini CF $ PC Fits 2.75 CF $ PC Fits 4.50 CF $1 600-PC Fits 6.00 CF $2 800-PC Fits 8.00 CF $ PC Fits CF $4 $22 50

51 2.75 OD CONFLAT FLANGES 6-BOLT HOLES NON-ROTATABLE, (6) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA. PRICE $ $ $ $ $ $ $ $13 ROTATABLE, (6) THROUGH HOLE R $ R $ R $ R $ R $ R $ R $ R $16 NON-ROTATABLE, (6) TAPPED HOLES PART NUMBER A B C D E F Thread PRICE T /4-28 $ T /4-28 $ T /4-28 $ T /4-28 $ T /4-28 $ T /4-28 $ T /4-28 $28 ROTATABLE, (6) TAPPED HOLES R-T /4-28 $ R-T /4-28 $ R-T /4-28 $ R-T /4-28 $ R-T /4-28 $ R-T /4-28 $ R-T /4-28 $33 HARDWARE AND SEALS FOR 2.75 OD CONFLAT FLANGE 275-BK (6) BOLTS, NUT & WASHER KIT $5 275-PN (3) PLATE NUTS $3 275-PNK (3) PLATE NUTS, (6) BOLTS & WASHERS Thru Hole CF $ BK-12 (6) 12-PT BOLTS, NUT & WASHER KIT $7 275-PNK-12 (3) PLATE NUTS, (6) 12-PT BOLT/WASHERS $ BT (6) BOLTS & WASHER KIT $6 Tapped Hole CF 275-BT12 (6) 12-PT BOLTS & WASHER KIT $7 275-VG (5) VITON GASKETS $15 All 2.75 OD CF 275-CG (10) COPPER GASKETS $16 51

52 3.38 OD CONFLAT FLANGES 8-BOLT HOLES NON-ROTATABLE, (8) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $ $42 ROTATABLE, (8) THROUGH HOLES R $ R $ R $48 NON-ROTATABLE, (8) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /16-24 $ T /16-24 $ T /16-24 $52 ROTATABLE, (8) TAPPED HOLES R-T /16-24 $ R-T /16-24 $ R-T /16-24 $ OD CONFLAT FLANGE HARDWARE AND SEALS 338-BK (8) BOLT, NUT & WASHER KIT $9 338-PN (4) PLATE NUTS $7 338-PNK (4) PLATE NUTS, (8) BOLTS & WASHERS Thru Hole CF $ BK-12 (8) 12-PT BOLT, NUT & WASHER KIT $ PNK-12 (4) PLATE NUT, (8) 12-PT BOLT/WASHER $ BT (8) BOLTS & WASHER KIT $6 Tapped Hole CF 338-BT12 (8) 12-PT BOLTS & WASHER KIT $ VG (1) VITON GASKET $ VG-5 (5) VITON GASKET All 3.38 OD CF $ CG (10) COPPER GASKETS $24 12-PT-WRN 12-POINT WRENCH $12 Leak Testing: On-site or at our facility... ON-SITE LEAK TESTING Man and Machine or using your equipment IN-HOUSE LEAK TESTING - SEND LDS YOUR PRODUCTS Includes part leak test certification No project too large or too small Level III NDT Certified Technicians $95 per hour - 2 Hour Minimum Estimates given BEFORE work begins LDS can even make your leak test fixture LET US DO THE WORK FOR YOU! 48 HOUR SERVICE AVAILABLE! 52

53 PhoeniXL $23100 RENT IT- SEE PAGE OD CONFLAT FLANGES 8-BOLT HOLES NON-ROTATABLE, (8) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $ $ $62 ROTATABLE, (8) THROUGH HOLES R $ R $ R $ R $71 NON-ROTATABLE, (8) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /16-24 $ T /16-24 $ T /16-24 $ T /16-24 $77 ROTATABLE, (8) TAPPED HOLES R-T /16-24 $ R-T /16-24 $ R-T /16-24 $ R-T /16-24 $ OD CONFLAT FLANGE HARDWARE AND SEALS 450-BK (8) BOLT, NUT & WASHER KIT $ PN (4) PLATE NUTS $6 450-PNK (4) PLATE NUTS, (8) BOLTS & WASHERS Thru Hole CF $ BK-12 (8) 12-PT BOLT, NUT & WASHER KIT $ PNK-12 (4) PLATE NUT, (8) 12-PT BOLT/WASHER $ BT (8) BOLTS & WASHER KIT $6 Tapped Hole CF 450-BT12 (8) 12-PT BOLTS & WASHER KIT $ VG (1) VITON GASKET $ VG-5 (5) VITON GASKETS $ CG (10) COPPER GASKETS All 4.50 OD CF $34 12-PT-WRN 12-POINT WRENCH $ PC PLASTIC CAP $1 Leybold PhoeniXL 300 HELIUM LEAK DETECTOR Leak rate: 5x10-12 to 10-1 mbar l/s Detects masses 2, 3 and 4 < 2 Minute Startup Auto ranging Auto internal zero and external zero function Internal calibrated leak NW25 Inlet Weighs only 80 lbs. 53

54 4.62 OD CONFLAT FLANGES 10-BOLT HOLES NON-ROTATABLE, (10) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $ $72 ROTATABLE, (10) THROUGH HOLES R $ R $ R $79 NON-ROTATABLE, (10) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /16-24 $ T /16-24 $ T /16-24 $90 ROTATABLE, (10) TAPPED HOLES R-T /16-24 $ R-T /16-24 $ R-T /16-24 $ OD CONFLAT FLANGE HARDWARE AND SEALS 462-BK (10) BOLT, NUT & WASHER KIT $ BK-12 (10) 12-PT BOLT, NUT & WASHER KIT $ PN (5) PLATE NUTS Thru Hole CF $9 462-PNK (5) PLATE NUT, (10) BOLTS & WASHERS $ PNK-12 (5) PLATE NUT, (10) 12-PT BOLT/WASHER $ BT (10) BOLTS & WASHER KIT $7 Tapped Hole CF 462-BT12 (10) 12-PT BOLTS/WASHER KIT $ VG (1) VITON GASKET $ VG-5 (5) VITON GASKET All 4.62 OD CF $ CG (10) COPPER GASKETS $44 ANTI-SEIZE STICK GREAT FOR USE WITH YOUR CONFLAT FLANGES! Protects metal parts in high heat environments Prevents rust, corrosion, seizing and eases disassembly Reduces friction and wear to critical parts Buttery texture ideal for both coarse and fine threads Exceptional lubrication properties 20 Gram Stick Silver Grade 1600 F (870 C) LDS LIST: $35 SALE: $20 Copper Grade 1800 F (982 C) LDS LIST: $35 SALE: $20 54

55 6.00 OD CONFLAT FLANGES 16-BOLT HOLES NON-ROTATABLE, (16) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $84 ROTATABLE, (16) THROUGH HOLES R $ R $102 NON-ROTATABLE, (16) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /16-24 $ T /16-24 $116 ROTATABLE, (16) TAPPED HOLES R-T /16-24 $ R-T /16-24 $ OD CONFLAT FLANGE HARDWARE AND SEALS 600-BK (16) BOLT, NUT & WASHER KIT $ PN (8) PLATE NUTS $ PNK (8) PLATE NUTS, (16) BOLTS & WASHERS Thru Hole CF $ BK-12 (16) 12-PT BOLT, NUT & WASHER KIT $ PNK-12 (8) PLATE NUT (16) 12-PT BOLT/WASHER $ BT (16) BOLTS & WASHER KIT $11 Tapped Hole CF 600-BT12 (16) 12-PT BOLTS & WASHER KIT $ VG (1) VITON GASKET $ VG-5 (5) VITON GASKET All 6.00 OD CF $ CG (10) COPPER GASKETS $ OD CONFLAT FLANGES 18-BOLT HOLES NON-ROTATABLE, (18) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $99 ROTATABLE, (18) THROUGH HOLES R $ R $107 NON-ROTATABLE, (18) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /16-24 $ T /16-24 $125 ROTATABLE, (18) TAPPED HOLES R-T /16-24 $ R-T /16-24 $ OD CONFLAT FLANGE HARDWARE AND SEALS 675-BK (18) BOLTS, NUT & WASHER KIT $19 Thru Hole CF 675-BK-12 (18) 12-PT BOLT, NUT & WASHER KIT $ BT (18) BOLTS & WASHER KIT $13 Tapped Hole CF 675-BT12 (18) 12-PT BOLTS & WASHER KIT $ VG (1) VITON GASKET $17 All 6.75 OD CF 675-CG (10) COPPER GASKETS $49 55

56 8.00 OD CONFLAT FLANGES 20-BOLT HOLES NON-ROTATABLE, (20) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $139 ROTATABLE, (20) THROUGH HOLES R $ R $164 NON-ROTATABLE, (20) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /16-24 $ T /16-24 $189 ROTATABLE, (20) TAPPED HOLES R-T /16-24 $ R-T /16-24 $219 HARDWARE AND SEALS OD CONFLAT FLANGE 800-BK (20) BOLT, NUT & WASHER KIT $ PN (10) PLATE NUTS $ PNK (10) PLATE NUTS, (20) BOLTS/WASHERS Thru Hole CF $ BK-12 (20) 12-PT BOLT, NUT & WASHER KIT $ PNK-12 (10) PLATE NUT, 12-PT BOLT/WASHERS $ BT (20) BOLTS & WASHER KIT $22 Tapped Hole CF 800-BT12 (20) 12-PT BOLTS & WASHER KIT $ VG (1) VITON GASKET $20 All 8.00 OD CF 800-CG (10) COPPER GASKETS $ OD CONFLAT FLANGES 24-BOLT HOLES NON-ROTATABLE, (24) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $290 ROTATABLE, (24) THROUGH HOLES R $ R $359 NON-ROTATABLE, (24) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /16-24 $ T /16-24 $324 ROTATABLE, (24) TAPPED HOLES R-T /16-24 $ R-T /16-24 $384 HARDWARE AND SEALS OD CONFLAT FLANGE 1000-BK (24) BOLT, NUT & WASHER KIT $ PN (12) PLATE NUTS $ PNK (12) PLATE NUTS, (24) BOLTS/ WASHERS Thru Hole CF $ BK-12 (24) 12-PT BOLT, NUT & WASHER KIT $ PNK-12 (12) PLATE NUT, (24)12-PT BOLT/WASHER $ BT (24) BOLTS & WASHER KIT $26 Tapped Hole CF 1000-BT12 (24) 12-PT BOLTS & WASHER KIT $ VG (1) VITON GASKET $23 All OD CF 1000-CG (10) COPPER GASKETS $68 56

57 12.00 OD CONFLAT FLANGES 32-BOLT HOLES NON-ROTATABLE, (32) THROUGH HOLES PART NUMBER A B C D E F HOLE DIA PRICE $ $455 ROTATABLE, (32) THROUGH HOLES R $ R $690 NON-ROTATABLE, (32) TAPPED HOLES PART NUMBER A B C D E F THREAD PRICE T /16-24 $ T /16-24 $494 ROTATABLE, (32) TAPPED HOLES R-T /16-24 $ R-T /16-24 $724 HARDWARE AND SEALS OD CONFLAT FLANGE 1200-BK (32) BOLT, NUT & WASHER KIT $48 Thru Hole CF 1200-BK-12 (32) 12-PT BOLT, NUT & WASHER KIT $ BT (32) BOLTS & WASHER KIT $35 Tapped Hole CF 1200-BT12 (32) 12-PT BOLT, NUT & WASHER KIT $ CG (1) COPPER GASKET 1200-CG-10 (10) COPPER GASKETS $364 All OD CF 1200-VG (1) VITON GASKET $ VG-5 (5) VITON GASKETS $ OD CONFLAT FLANGE - 30 BOLT HOLES HARDWARE AND SEALS 1325-BK BOLT, NUT & WASHER KIT Thru Hole CF $ BT BOLTS & WASHER KIT Tapped Hole CF $ CG (1) COPPER GASKET $ CG-5 (5) COPPER GASKETS All OD CF $ VG (1) VITON GASKET $ OD CONFLAT FLANGE - 30 BOLT HOLES HARDWARE AND SEALS 1400-BK (30) BOLT, NUT & WASHER KIT Thru Hole CF $ BT (30) BOLTS & WASHER KIT Tapped Hole CF $ CG (1) COPPER GASKET $ CG-5 (5) COPPER GASKETS All OD CF $ VG (1) VITON GASKET $ VG-5 (5) VITON GASKETS $ OD CONFLAT FLANGE - 32 BOLT HOLES HARDWARE AND SEALS 1450-BK (32) BOLT, NUT & WASHER KIT Thru Hole CF $ BT (32) BOLTS & WASHER KIT Tapped Hole CF $ CG (1) COPPER GASKET All OD CF $ VG (1) VITON GASKET $ OD CONFLAT FLANGE - 36 BOLT HOLES HARDWARE AND SEALS 1650-BK (36) BOLT, NUT & WASHER KIT Thru Hole CF $ BT (36) BOLTS & WASHER KIT Tapped Hole CF $ CG (1) COPPER GASKET $70 All OD CF 1650-VG (1) VITON GASKET $67 $38 57

58 MAKE YOUR OWN QUICK COUPLINGS - SEE PAGE 69 CF TO QUICK COUPLING STAINLESS STEEL NUMBER A B C PRICE NUMBER A B C PRICE 133xQ06 CF $65 450xQ50 CF $ xQ12 CF $65 450xQ75 CF $ xQ18 CF $65 450xQ100 CF $ xQ25 CF $65 450xQ112 CF $ xQ31 CF $65 450xQ125 CF $ xQ38 CF $65 450xQ150 CF $ xQ50 CF $75 450xQ200 CF $ xQ62 CF $ OD CONFLAT FLANGE 2.12 OD CONFLAT FLANGE 600xQ50 CF $ xQ25 CF $79 600xQ75 CF $ xQ50 CF $84 600xQ100 CF $ xQ75 CF $84 600xQ112 CF $ OD CONFLAT FLANGE 600xQ125 CF $ xQ06 CF $69 600xQ150 CF $ xQ12 CF $69 600xQ200 CF $ xQ18 CF $ OD CONFLAT FLANGE 275xQ25 CF $69 800xQ50 CF $ xQ31 CF $69 800xQ75 CF $ xQ38 CF $69 800xQ100 CF $ xQ50 CF $69 800xQ112 CF $ xQ62 CF $69 800xQ125 CF $ xQ75 CF $69 800xQ150 CF $ xQ87 CF $69 800xQ200 CF $ xQ100 CF $69 275xQ112 CF $90 275xQ125 CF $90 275xQ150 CF $ OD CONFLAT FLANGE 338xQ50 CF $ xQ75 CF $ xQ100 CF $ xQ112 CF $ xQ125 CF $ xQ150 CF $ STAINLESS STEEL CAN BE USED WITH VACUUM GAUGES CONTACT LDS FOR OTHER CONFIGURATIONS THANK YOU COLLEGES AND UNIVERSITIES! CHECK OUR WEBSITE FOR UNIVERSITY EXCLUSIVE DEALS All Types of UNIVERSITY ONLY Deals Vacuum Flanges From $2 Vacuum Pumps From $595 Vacuum Valves From $99 OVERSTOCK UNIVERSITY ONLY SPECIALS VACUUMUNIVERSITY.COM Also open To Non-Profit & US Government Facilities 58

59 CF 90 o CF 45 o ELBOWS STAINLESS STEEL PART NUMBER FLANGE OD TUBE OD A LIST SALE VACUUM ESSENTIALS E $90 $ E45-VE $ E $100 $ E45-VE $ E $120 $ E45-VE $ E $200 $ E45-VE $ E $275 $ E45-VE $ E $280 $ E45-VE $ E $390 $ E45-VE $418 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) CF 90 o ELBOWS STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS E90 CF $75 $ E90-VE $ E90 CF $90 $ E90-VE $ E90 CF $91 $ E90-VE $ E90 CF $180 $ E90-VE $ E90 CF $275 $ E90-VE $ E90 CF $330 $ E90-VE $ E90 CF $350 $ E90-VE $ E90 CF $595 $ E90-VE $633 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) MITRED ELBOWS STAINLESS STEEL PART NUMBER FLANGE OD TUBE OD A LIST SALE VACUUM ESSENTIALS E90M $75 $ E90M-VE $ E90M $85 $ E90M-VE $ E90M $90 $ E90M-VE $ E90M $185 $ E90M-VE $ E90M $280 $ E90M-VE $ E90M $325 $ E90M-VE $ E90M $400 $ E90M-VE $ E90M $475 $ E90M-VE $ E90M $570 $ E90M-VE $ E90M $1250 $ E90M-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) ZERO-LENGTH GLASS VIEWPORTS 133-VPA $130 VPA SERIES INCLUDES 1 GASKET ACG-133 Annealed gasket $4 212-VPA $135 ACG-212 Annealed gasket $5 275-VPA $142 ACG-275 Annealed gasket $5 338-VPA $162 ACG-338 Annealed gasket $6 450-VPA $273 ACG-450 Annealed gasket $7 462-VPA $298 ACG-462 Annealed gasket $7 600-VPA $409 ACG-600 Annealed gasket $8 800-VPA $637 ACG-800 Annealed gasket $10 Supplied with 1 annealed copper gasket 1000-VPA $785 ACG-1000 Annealed gasket $15 Kodial glass (alkali borosilicate 7056) Repeated bakeout cycles to 350 C (heating rate should not exceed 2-3 per minute) CF flanged viewports require a fully annealed copper gasket (one supplied with each CF viewport). CAUTION: All viewports are fragile and should be handled and mounted with extreme caution. Never scratch the viewing area a weakened viewport may implode (or explode under wrong conditions). 59

60 NW TO CONFLAT REDUCING TEES - PAGE 29 CF TEE STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS CFT CF $94 $ CFT-VE $ CFT CF $120 $ CFT-VE $ CFT 2.46 $125 $ CFT-VE $110 CF CFT-L 2.62 $130 $ CFT-L-VE $ CFT CF $245 $ CFT-VE $ CFT 3.38 $325 $ CFT-VE $320 CF CFT-L 4.12 $335 $ CFT-L-VE $ CFT CF $360 $ CFT-VE $ CFT CF $440 $ CFT-VE $ CFT CF $810 $ CFT-VE $ CFT CF $1475 $ CFT-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 4-WAY CROSS STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS X CF $120 $ X-VE $ X CF $140 $ X-VE $ X CF $165 $ X-VE $ X CF $350 $ X-VE $ X 3.38 $420 $ X-VE $427 CF X-L 4.12 $450 $ X-L-VE $ X CF $550 $ X-VE $ X 4.32 $660 $ X-VE $665 CF X-L 5.31 $660 $ X-L-VE $ X CF $1080 $ X-VE $ X CF $1240 $ X-VE $ X CF $2100 $ X-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 5-WAY CROSS STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS X CF $210 $ X-VE $ X CF $235 $ X-VE $ X CF $250 $ X-VE $ X CF $580 $ X-VE $ X CF $685 $ X-VE $ X CF $875 $ X-VE $ X CF $1085 $ X-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 6-WAY CROSS STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS X CF $300 $ X-VE $ X CF $310 $ X-VE $ X CF $320 $ X-VE $ X CF $635 $ X-VE $ X CF $900 $ X-VE $ X CF $1055 $ X-VE $ X CF $1250 $ X-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 60

61 REDUCING TEE STAINLESS PART NUMBER FLANGE 1 & 2 FLANGE 3 CF OD CF OD A B LIST SALE 275x133-RDT CF $125 $106 CF x212-RDT CF $130 $ x133-RDT CF $285 $252 CF x275-RDT CF $290 $ x275-RDT CF $300 $265 CF x338-RDT CF $320 $ x338-RDT CF $450 $409 CF x450-RDT CF $475 $ x275-RDT CF $500 $ x338-RDT CF $525 $472 CF x450-RDT CF $575 $ x462-RDT CF $585 $530 ADDITIONAL COMBINATIONS AVAILABLE REDUCING CROSS STAINLESS PART NUMBER FLANGE 1 & 2 FLANGE 3 & 4 CF OD CF OD A B LIST SALE 275x133-RDX CF $215 $183 CF x212-RDX CF $230 $ x133-RDX CF $300 $255 CF x275-RDX CF $335 $ x275-RDX CF $360 $316 CF x338-RDX CF $400 $ x338-RDX CF $520 $462 CF x450-RDX CF $520 $ x275-RDX CF $520 $ x338-RDX CF $545 $499 CF x450-RDX CF $585 $ x462-RDX CF $675 $ x600-RDX CF CF $1025 $ x275-RDX CF $775 $ x338-RDX CF $835 $793 CF x450-RDX CF $885 $ x600-RDX CF $1055 $ x800-RDX CF CF $1982 $1560 ADDITIONAL COMBINATIONS AVAILABLE CF 6-WAY CUBES STAINLESS STEEL PART NUMBER FLANGE SIZE A LIST SALE 133-CU CF $650 $ CU CF $1250 $479 ADDITIONAL SIZES AVAILABLE ONLINE LOOK FOR VACUUM ESSENTIALS LDS COMBINES PRODUCTS TO SAVE YOU EVEN MORE! NW TO CONFLAT REDUCING CROSS - PAGE 31 61

62 NW TO SWAGELOK ADAPTORS - SEE PAGE 33 Swagelok is a registered trademark of Crawford Fitting Company CONFLAT FLANGE - SWAGELOK Sensitivity: 0.2 ppm H 2 in air ADAPTORS A PART NUMBER TUBE OD PRICE VACUUM ESSENTIALS 133xSWG $56 133xSWG-25-VE $73 CF xSWG $63 133xSWG-38-VE $80 133xSWG $68 133xSWG-50-VE $85 212xSWG $66 212xSWG-25-VE $86 CF xSWG $73 212xSWG-38-VE $93 212xSWG $82 212xSWG-50-VE $ xSWG $ xSWG-75-VE $ xSWG $61 275xSWG-25-VE $81 275xSWG $68 275xSWG-38-VE $88 CF xSWG $75 275xSWG-50-VE $95 275xSWG $ xSWG-75-VE $ xSWG $ xSWG-100-VE $ xSWG $75 338xSWG-25-VE $ xSWG $83 338xSWG-38-VE $115 CF xSWG $94 338xSWG-50-VE $ xSWG $ xSWG-75-VE $ xSWG $ xSWG-100-VE $ xSWG $ xSWG-25-VE $ xSWG $ xSWG-38-VE $159 CF xSWG $ xSWG-50-VE $ xSWG $ xSWG-75-VE $ xSWG $ xSWG-100-VE $ xSWG $ xSWG-25-VE $ xSWG $ xSWG-38-VE $194 CF xSWG $ xSWG-50-VE $ xSWG $ xSWG-75-VE $ xSWG $ xSWG-100-VE $251 1-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) HYDROGEN LEAK DETECTION SNIFFER LEAK DETECTOR Response time: <1 second Pre-heating time: <6 second Outputs: Display with 10-segment LED indicator Speaker: 5-1, 600 Hz Earphone: Standard 3.5 mm jack, > 8 ohms Battery type: Rechargeable lead batteries Battery capacity: 13 hours at 20 C, 6 hours at - 20 C Charger: AC charger ( VAC) - Included Car charger (9-15 VDC) - Included Casing: Aluminum Protection: Waterproof (IP65) Dimensions and weight: 250 x 120 x 85 mm, 1.9 kg In carrying case: 260 x 220 x 95 mm, 2.5 kg 9012 XRS 9012 XRS BATTERY OPERATED VISIT OUR WEBSITE OR CONTACT LDS FOR PRICING 62

63 VCR VCR is a registered trademark of Cajon Company VCO VCO is a registered trademark of Cajon Company ADAPTORS - CONFLAT FLANGE A TUBE OD FEMALE VCR MALE VCR CF 1.33 CF 2.75 CF 4.50 CF x25VCR $60 133x25VCR-M $ x38VCR $67 133x38VCR-M $ x50VCR $78 133x50VCR-M $ x25VCR $64 275x25VCR-M $ x38VCR $70 275x38VCR-M $ x50VCR $70 275x50VCR-M $ x75VCR $ x75VCR-M $ x100VCR $ x100VCR-M $ x25VCR $ x25VCR-M $ x38VCR $ x38VCR-M $ x50VCR $ x50VCR-M $ x75VCR $ x75VCR-M $ x100VCR $ x100VCR-M $ x25VCR $ x25VCR-M $ x38VCR $ x38VCR-M $ x50VCR $ x50VCR-M $ x75VCR $ x75VCR-M $ x100VCR $ x100VCR-M $212 ADAPTORS - CONFLAT FLANGE A TUBE OD FEMALE VCO MALE VC0 CF 1.33 CF 2.75 CF 4.50 CF x25VCO $66 133x25VCO-M $ x38VCO $78 133x38VCO-M $ x50VCO $89 133x50VCO-M $ x25VCO $71 275x25VCO-M $ x38VCO $82 275x38VCO-M $ x50VCO $93 275x50VCO-M $ x75VCO $ x75VCO-M $ x100VC0 $ x100VC0-M $ x25VCO $ x25VCO-M $ x38VCO $ x38VCO-M $ x50VC0 $ x50VC0-M $ x75VCO $ x75VCO-M $ x100VC0 $ x100VC0-M $ x25VCO $ x25VCO-M $ x38VCO $ x38VCO-M $ x50VC0 $ x50VC0-M $ x75VC0 $ x75VC0-M $ x100VC0 $ x100VC0-M $223 LEAK TEST USING HYDROGEN? IT S ALL IN THE MIX Tracer gas facts - Pure hydrogen gas is never used as tracer gas, since it is highly flammable. Instead, a gas mixture of 5% hydrogen and 95% nitrogen is used. This mixture is non-flammable (refer to ISO 10156), non-toxic, non-corrosive and environmentally friendly. For more information about using hydrogen as a tracer gas, visit: LDSVACUUM.COM/HYDROGEN.PDF NW TO VCR AND VCO FLANGES - PAGES

64 ISO NIPPLES - PAGE 44 HALF NIPPLES - FIXED, THRU HOLES STAINLESS FLANGES ARE NON-ROTATABLE ONE FLANGE IS ROTATABLE PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS LF CF $38 $ LF-VE $ LF CF $40 $ LF-VE $ LF CF $42 $ LF-VE $ LF CF $81 $ LF-VE $ LF CF $120 $ LF-VE $ LF CF $150 $ LF-VE $ LF CF $160 $ LF-VE $ LF CF $175 $ LF-VE $ LF CF $300 $ LF-VE $ LF CF $415 $ LF-VE $459 1-Bolt, Nut & Washer Kit (BK) & 10-Copper Gaskets (CG) FULL NIPPLES STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS N CF $60 $ N-VE $ N CF $67 $ N-VE $ N CF $80 $ N-VE $ N CF $150 $ N-VE $ N 6.76 $215 $ N-VE $224 CF N-L 8.25 $225 $ NL-VE $ N CF $250 $ N-VE $ N 8.64 $280 $ N-VE $301 CF N-L $300 $ NL-VE $ N CF $435 $ N-VE $ N $505 $ N-VE $567 CF N-L $530 $ NL-VE $ N CF $850 $ N-VE $920 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) BELLOWS STAINLESS STEEL PART NUMBER WALL LENGTH LIST SALE VACUUM ESSENTIALS 133x133-R-MH $124 $ MH4-VE $ x212-R-MH $136 $ MH4-VE $ x275-R-MH $135 $ MH4-VE $ x338-R-MH $265 $ MH4-VE $ x450-R-MH $400 $ MH6-VE $ x462-R-MH $500 $ MH7-VE $ x600-R-MH $725 $ MH6-VE $ x800-R-MH $1100 $ MH8-VE $749 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) LDS HAS ALL OF YOUR SPARE PARTS! Plate-Nuts 12-Point and Hex-Head Bolt Helium Spray Probe w/5 tips, $ Coiled Length, 40 useable length 1/8 Swivel Male NPT Connection Part Number: LDS DR 12-Point & Hex Wrench $

65 STRAIGHT REDUCING NIPPLES STAINLESS Alternate Combinations Available Contact LDS FLEXIBLE METAL HOSE STAINLESS STEEL 1.33" MINI CONFLAT FLANGE 3.38" CONFLAT FLANGE 0.75" HOSE ID WALL LENGTH LIST SALE 2.00" HOSE ID WALL LENGTH LIST SALE 133x133-R-MH12-T $125 $98 338x338-R-MH10-T $231 $ x133-R-MH18-T $131 $ x338-R-MH20-T $274 $ x133-R-MH24-T $144 $ x338-R-MH24-T $286 $ x133-R-MH30-T $150 $ x338-R-MH $340 $ x133-R-MH36-T $156 $ " CONFLAT FLANGE 2.12" CONFLAT FLANGE 2.50" HOSE ID WALL LENGTH LIST SALE 1.00" HOSE ID WALL LENGTH LIST SALE 450x450-R-MH20-T $392 $ x212-R-MH10-T $134 $94 450x450-R-MH30-T $467 $ x212-R-MH18-T $150 $ x212-R-MH24-T $164 $ x212-R-MH36-T $175 $ " CONFLAT FLANGE 1.50" HOSE ID WALL LENGTH LIST SALE 275x275-R-MH10-T $162 $ x275-R-MH12-T $175 $ x275-R-MH $235 $ x275-R-MH24-T $200 $ x275-R-MH30-T $221 $ x275-R-MH $285 $242 PART NUMBER FLANGE 1 FLANGE 2 CONFLAT TUBE OD CONFLAT TUBE OD A SALE 275x133-RN CF CF $60 338x275-RN CF CF $ x133-RN 0.75 CF $112 CF x275-RN 1.50 CF $ x275-RN 1.50 CF $170 CF x450-RN 2.50 CF $ x275-RN 1.50 CF $ x450-RN CF CF $ x600-RN 4.00 CF $ x275-RN 1.50 CF $ x450-RN 2.50 CF $575 CF x600-RN 4.00 CF $ x800-RN 6.00 CF $625 CONICAL REDUCING NIPPLES STAINLESS Alternate Combinations Available Contact LDS PART NUMBER FLANGE 1 FLANGE 2 CONFLAT TUBE OD CONFLAT TUBE OD A SALE 212x133-CR CF CF $ x133-CR CF $105 CF x212-CR CF $ x212-CR CF $100 CF x275-CR CF $ x275-CR CF $145 CF x338-CR CF $ x275-CR CF $ x338-CR CF CF $ x450-CR CF $ x338-CR CF $ x450-CR CF CF $ x462-CR CF $ x600-CR CF CF $465 ONE FLANGE IS ROTATABLE OTHER COMINATIONS AVAILABLE 65

66 NW TO NW CONICAL REDUCERS - PAGE 37 CONICAL REDUCER WELD BODY S/S PART NUMBER A B C LIST SALE WF100x075-CR $28 $18 WF150x075-CR 0.75 $28 $ WF150x100-CR 1.00 $28 $18 WF200x100-CR 1.00 $33 $ WF200x150-CR 1.50 $35 $24 WF250x150-CR 1.50 $44 $ WF250x200-CR 2.00 $47 $37 WF300x150-CR 1.50 $61 $47 WF300x200-CR $66 $51 WF300x250-CR 2.50 $72 $57 WF400x200-CR 2.00 $85 $58 WF400x250-CR $138 $63 WF400x300-CR 3.00 $187 $68 TEE WELD BODY S/S PART NUMBER TUBE OD A LIST SALE WF075-T 1.00 $30 $ WF075-T-L 1.85 $30 $15 WF100-T 1.80 $31 $ WF100-T-L 1.88 $31 $15 WF150-T 2.25 $30 $15 WF150-T-L $32 $26 WF150-T-XL 2.41 $36 $29 WF200-T 2.59 $35 $ WF200-T-L 3.00 $35 $22 WF250-T 3.00 $65 $ WF250-T-L 3.75 $70 $59 WF300-T $65 $53 WF400-T $100 $83 WF400-T-L 4.87 $110 $89 WF600-T $360 $319 WF800-T $475 $398 WF1000-T $1375 $965 REDUCING TEE WELD BODY S/S PART NUMBER RUN OD A LEG OD B LIST SALE WF100x075-RWT $27 $23 WF150x075-RWT $32 $ WF150x100-RWT $32 $27 WF200x075-RWT $50 $43 WF200x100-RWT $60 $43 WF200x150-RWT $80 $68 WF250x150-RWT $80 $ WF250x200-RWT $80 $68 WF300x150-RWT $100 $69 WF300x200-RWT $105 $74 WF300x250-RWT $115 $74 WF400x150-RWT $115 $96 WF400x200-RWT $115 $ WF400x250-RWT $120 $100 WF400x300-RWT $125 $104 CHECK OUT OVERSTOCK SPECIALS ONLINE 66

67 MAKE YOUR OWN ASSEMBLIES WITH WELD BODIES! 45 o ELBOW WELD BODY S/S PART NUMBER TUBE OD A LIST SALE WF075-E $12 $9 WF100-E $14 $11 WF150-E $15 $12 WF200-E $18 $14 WF250-E $31 $24 WF300-E $34 $27 WF400-E $58 $47 45 o ELBOW WITH TANGENTS S/S PART NUMBER TUBE OD A LIST SALE WF075-E45-T $21 $17 WF100-E45-T $24 $19 WF150-E45-T $26 $21 WF200-E45-T $28 $23 WF250-E45-T $35 $29 WF300-E45-T $57 $47 WF400-E45-T $68 $57 90 o ELBOW WELD BODY S/S PART NUMBER TUBE OD A LIST SALE WF075-E $13 $ WF075-E90-L 1.12 $13 $11 WF100-E $14 $8 WF150-E $17 $13 WF200-E $23 $15 WF250-E $36 $31 WF250-E90-SL 5.75 $40 $31 WF300-E $40 $34 WF400-E $65 $55 WF600-E $170 $149 WF800-E $285 $257 WF1000-E $400 $ o ELBOW WITH TANGENTS S/S PART NUMBER TUBE OD A B LIST SALE WF075-E90-T $27 $23 WF100-E90-T $29 $25 WF150-E90-T 2.41 $30 $ WF150-E90-TL 4.97 $40 $34 WF200-E90-T 4.06 $42 $ WF200-E90-TL 5.36 $50 $43 WF250-E90-T $54 $46 WF300-E90-T $63 $54 WF400-E90-T $105 $89 WF400-E90-T-SL 8.01 $105 $89 90 o MITERED ELBOW WELD BODY S/S PART NUMBER TUBE OD CENTERLINE LIST SALE WF075-E90M $18 $15 WF100-E90ML $20 $16 WF150-E90M $37 $29 WF200-E90ML $44 $35 WF250-E90M $51 $40 WF300-E90M $95 $74 WF400-E90M $165 $124 MAKE YOUR OWN NW ASSEMBLIES - SEE PAGES

68 4-WAY CROSS WELD BODY S/S PART NUMBER TUBE OD A LIST SALE WF075-X 1.00 $42 $ WF075-X-L 1.40 $42 $34 WF100-X 1.80 $44 $ WF100-X-L 1.88 $46 $37 WF150-X 2.25 $51 $ WF150-X-L 2.39 $78 $63 WF200-X 2.56 $70 $ WF200-X-L 3.00 $70 $57 WF250-X 3.00 $84 $ WF250-X-L 3.75 $160 $129 WF300-X $140 $113 WF400-X $180 $145 WF400-X-L 4.87 $180 $145 WF600-X $550 $470 WF800-X $773 $661 WF1000-X $1530 $1277 WELDABLE BODIES - REDUCING CROSS PART NUMBER RUN OD A LEG OD B LIST SALE PART NUMBER WF100x075-RWX $125 $64 WF150x075-RWX $125 $ WF150x100-RWX $125 $72 WF200x075-RWX $125 $106 WF200x100-RWX $115 $98 WF200x150-RWX $125 $106 WF250x150-RWX $120 $ WF250x200-RWX $175 $149 WF300x150-RWX $180 $143 WF300x200-RWX $180 $143 WF300x250-RWX $200 $159 WF400x150-RWX $210 $174 WF400x200-RWX $230 $186 WF400x250-RWX $260 $221 WF400x300-RWX $285 $232 5-WAY CROSS 6-WAY CROSS TUBE OD A LIST SALE PART NUMBER TUBE OD A LIST SALE WF075-5X $152 $89 WF075-6X $185 $116 WF100-5X-L $160 $99 WF100-6X $220 $159 WF150-5X $245 $108 WF150-6X $210 $168 WF200-5X-L $350 $207 WF200-6X $395 $212 WF250-5X $410 $242 WF250-6X $425 $262 WF300-5X $525 $279 WF300-6X $625 $329 WF400-5X $640 $341 WF400-6X $795 $ STAINLESS STEEL TUBING - NO FLANGES NUMBER OD WALL POLISH FOOT NUMBER OD WALL POLISH FOOT 025-ST-R X $5 300-ST-R X $ ST-R X $5 400-ST-R X $ ST-R X $5 500-ST-R $ ST-R X $6 600-ST-R $ ST-R X $9 800-ST-R $ ST-R X $ ST-R $ ST-R X $ ST-R $ ST-R X $15 Cut Charge Per Cut Length 200-ST-R X $20 $10-1/4-3 OD 250-ST-R X $22 $25-4 OD and Larger 68

69 K & KM SERIES PLUG FIGURE 2 1/16 TUBE OD 1/8 TUBE OD 3/16 TUBE OD 1/4 TUBE OD 5/16 TUBE OD 3/8 TUBE OD 1/2 TUBE OD 5/8 TUBE OD 3/4 TUBE OD 7/8 TUBE OD 1.00 TUBE OD 1-1/8 TUBE OD 1-1/4 TUBE OD 1-3/8 TUBE OD 1-1/2 TUBE OD 1-5/8 TUBE OD 2.00 TUBE OD VACUUM COUPLINGS P/N EACH WALL A B C D E S-06-K/KM $20 ONE SIZE S-06-P $21 PLUG, FIGURE S-12-K/KM $20 ONE SIZE S-12-P $21 PLUG, FIGURE S-18-K/KM $20 ONE SIZE S-18-P $21 PLUG, FIGURE S-25-K $20 THICK WALL S-25-KM $20 THIN WALL S-25-P $21 PLUG, FIGURE S-31-K/KM $22 ONE SIZE S-31-P $21 PLUG, FIGURE S-38-K $22 THICK WALL S-38-KM $22 THIN WALL S-38-P $21 PLUG, FIGURE S-50-K $25 THICK WALL S-50-KM $25 THIN WALL S-50-P $21 PLUG, FIGURE S-62-K $28 THICK WALL S-62-KM $28 THIN WALL S-62-P $24 PLUG, FIGURE S-75-K $30 THICK WALL S-75-KM $30 THIN WALL S-75-P $24 PLUG, FIGURE S-87-K $35 THICK WALL S-87-KM $35 THIN WALL S-87-P $24 PLUG, FIGURE S-100-K $40 THICK WALL S-100-KM $40 THIN WALL S-100-P $24 PLUG, FIGURE S-112-K $43 THICK WALL S-112-KM $43 THIN WALL S-112-P $32 PLUG, FIGURE S-125-K $60 THICK WALL S-125-KM $60 THIN WALL S-125-P $32 PLUG, FIGURE S-138-K $120 THICK WALL S-138-KM $120 THIN WALL S-138-P $32 PLUG, FIGURE S-150-K $90 THICK WALL S-150-KM $90 THIN WALL S-150-P $44 PLUG, FIGURE S-162-K $145 THICK WALL S-162-KM $145 THIN WALL S-162-P $44 PLUG, FIGURE S-200-K $155 THICK WALL S-200-KM $120 THIN WALL S-200-P $47 PLUG, FIGURE O Ring Groove Machined into Retainer Ring ID Dimension Allows for Tube Variations 69

70 MANUAL RIGHT ANGLE VALVES - TUBE ENDS VITON SEAL FLANGE OD A B C D PART NUMBER EACH MRV-075 $ MRV-100 $247 TUBE MRV-150 $264 END MRV-200 $ MRV-250 $ MRV-300 $688 COPPER SEAL FLANGE OD A B C D PART NUMBER EACH MRVC-075 $ MRVC-100 $297 TUBE MRVC-150 $319 END MRVC-200 $ MRVC-250 $517 MANUAL RIGHT ANGLE VALVES - NW & ISO FLANGES VITON SEAL FLANGE OD A B C D VACUUM ESSENTIAL PART NUMBER EACH NW MRV-NW16-VE $256 MRV-0752-NWB $240 NW MRV-NW25-VE $264 MRV-1002-NWB $246 NW MRV-NW40-VE $290 MRV-1502-NWB $270 NW MRV-NW50-VE $372 MRV-2002-NWB $350 ISO MRV-ISO63-VE $663 MRV-2502-ISO $589 ISO MRV-ISO80-VE $879 MRV-3002-ISO $805 2-SS/Viton Centering Rings and Clamps VALVE ONLY PRICE MANUAL RIGHT ANGLE VALVES - CONFLAT FLANGED VITON SEAL COPPER SEAL PORT OD A B C D VACUUM ESSENTIAL PART NUMBER EACH 1.33 CF MRV-133V-VE $279 MRV-0752-CF $ CF MRV-212V-VE $302 MRV-1002-CF $ CF MRV-275V-VE $333 MRV-1502-CF $ CF MRV-338V-VE $493 MRV-2002-CF $ CF MRV-450V-VE $672 MRV-2502-CF $ CF MRV-462V-VE $761 MRV-3002-CF $696 PORT OD A B C D VACUUM ESSENTIAL PART NUMBER EACH 1.33 CF MRV-133C-VE $343 MRVC-0752-CF $ CF MRV-212C-VE $381 MRVC-1002-CF $ CF MRV-275C-VE $407 MRVC-1502-CF $ CF MRV-338C-VE $547 MRVC-2002-CF $ CF MRV-450C-VE $750 MRVC-2502-CF $698 2-Bolt Kits &10-Copper Gaskets VALVE ONLY PRICE BAKEABLE ALL METAL VALVES - CONFLAT COPPER SEAL PORT OD A B C D VACUUM ESSENTIAL PART NUMBER EACH 1.33 CF UHV-133-VE $649 UHV-0752-CF $ CF UHV-275-VE $681 UHV-1502-CF $659 2-Bolt Kits &10-Copper Gaskets VALVE ONLY PRICE Materials Operating temperature: -250 C to 400 C Pulled port body: 304 stainless steel Maximum bakeout temperature Bellows: Formed 321 stainless steel Open: 400 C Poppet seal: OFHC Copper Closed: 300 C Actuation: Manual using self-lubricating Vacuum rated: 1x10-10 Torr - UHV bronze nuts with ACME threads Helium leak rated: std. cc/second or less 70

71 PNEUMATIC RIGHT ANGLE VALVES - TUBE ENDS VITON SEAL PORT OD A B C PART NUMBER EACH PRV-075 $252 TUBE PRV-100 $279 END PRV-150 $ PRV-200 $409 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC RIGHT ANGLE VALVES - NW & ISO AIR TO OPEN SPRING TO CLOSE VITON SEAL VITON SEAL PORT OD A B C VACUUM ESSENTIALS PART NUMBER EACH NW PRV-NW16-VE $281 PRV-0752-NWB $265 NW PRV-NW25-VE $317 PRV-1002-NWB $299 NW PRV-NW40-VE $425 PRV-1502-NWB $325 NW PRV-NW50-VE $442 PRV-2002-NWB $420 2 Wing Clamps (CW) & 2 SS/Viton Centering Rings (SRV) VALVE ONLY PRICE PORT OD A B C VACUUM ESSENTIALS PART NUMBER EACH ISO PRV-ISO63-VE $714 PRV-2502-ISO $640 ISO PRV-ISO80-VE $964 PRV-3002-ISO $890 ISO PRV-ISO100-VE $964 PRV-4002-ISO $890 6 Double Claw Clamps (DC) & 2 SS/Viton Centering Rings (SRV) VALVE ONLY PRICE PNEUMATIC RIGHT ANGLE VALVES - CONFLAT FLANGE VITON SEAL PORT OD A B C VACUUM ESSENTIALS PART NUMBER EACH 1.33 CF PRV-133V-VE $279 PRV-0752-CF $ CF PRV-212V-VE $373 PRV-1002-CF $ CF PRV-275V-VE $373 PRV-1502-CF $ CF PRV-338V-VE $554 PRV-2002-CF $514 AIR TO OPEN, SPRING TO CLOSE 2-Bolt Kits &10-Copper Gaskets VALVE ONLY PRICE PNEUMATIC RIGHT ANGLE VALVES - INDUSTRIAL STRENGTH Normally Closed, pressurize to open, spring seal Aluminum Body Service Life: 2 Million Cycles Magnetic Piston XLAV Series 24VDC Solenoid (XLAV Series) Light and surge suppressor Operating Temperature: XLA: 5 TO 60 o C XLAV: 5 TO 50 o C Operating Pressure: 760 to 7.5x10-9 Torr Air Operated *Leakage: Normally Closed Internal: 10-9 Torr l/s External: Torr l/s *At ordinary temperatures, excluding gas permeation PORT DESCRIPTION PART NUMBER EACH NW16 Without Solenoid Valve XLA-16-M9 $332 With Solenoid Valve XLAV-16-M9-5L $393 NW25 Without Solenoid Valve XLA-25-M9 $361 With Solenoid Valve XLAV-25-M9-5L $422 NW40 Without Solenoid Valve XLA-40-M9 $401 With Solenoid Valve XLAV-40-M9-5L $462 NW50 Without Solenoid Valve XLA-50-M9 $620 With Solenoid Valve XLAV-50-M9-5L $681 ISO63 Without Solenoid Valve XLA-63-M9 $834 With Solenoid Valve XLAV-63-M9-5L $895 ISO80 Without Solenoid Valve XLA-80-M9 $1121 With Solenoid Valve XLAV-80-M9-5L $1181 Without Solenoid Valve XLA-100-M9 $2369 ISO100 With Solenoid Valve XLAV-100-M9-5L POR Additional Information And Drawings Available Online 71

72 VITON SEAL MANUAL INLINE VALVES - NO FLANGE PART NUMBER FLANGE OD A B C D E F SALE MIV-075 TUBE $283 MIV-100 TUBE $292 MIV-150 TUBE $320 MIV-200 TUBE $427 COPPER SEAL VITON SEAL VITON SEAL PART NUMBER FLANGE OD A B C D E F SALE MIVC-075 TUBE $324 MIVC-100 TUBE $328 MIVC-150 TUBE $373 MIVC-200 TUBE $479 MANUAL INLINE VALVES - NW FLANGE PART NUMBER FLANGE OD A B C D E F SALE MIV-0752-NWB NW $297 MIV-1002-NWB NW $309 MIV-1502-NWB NW $342 MIV-2002-NWB NW $484 MANUAL INLINE VALVES - CONFLAT FLANGE PART NUMBER FLANGE OD A B C D E F SALE MIV-0752-CF 1.33 CF $310 MIV-1002-CF 2.12 CF $369 MIV-1502-CF 2.75 CF $381 MIV-2002-CF 3.38 CF $522 VITON SEAL VITON SEAL VITON SEAL COPPER SEAL PART NUMBER FLANGE OD A B C D E F SALE MIVC-0752-CF 1.33 CF $384 MIVC-1002-CF 2.12 CF $424 MIVC-1502-CF 2.75 CF $468 MIVC-2002-CF 3.38 CF $576 PNEUMATIC INLINE - NO FLANGE PART NUMBER FLANGE OD A B C D E LIST SALE PIV-075 TUBE $330 $297 PIV-100 TUBE $410 $333 PIV-150 TUBE $435 $339 PIV-200 TUBE $600 $477 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC INLINE - NW FLANGE PART NUMBER FLANGE OD A B C D E LIST SALE PIV-0752-NWB NW $355 $309 PIV-1002-NWB NW $425 $351 PIV-1502-NWB NW $455 $391 PIV-2002-NWB NW $620 $508 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC INLINE - CONFLAT FLANGE PART NUMBER FLANGE OD A B C D E LIST SALE PIV-0752-CF 1.33 CF $365 $324 PIV-1002-CF 2.12 CF $470 $394 PIV-1502-CF 2.75 CF $495 $418 PIV-2002-CF 3.38 CF $695 $634 AIR TO OPEN, SPRING TO CLOSE 72

73 VITON SEAL MANUAL ANGLE INLINE - NO FLANGES PART NUMBER FLANGE OD A B C D SALE MAIV-075 TUBE $328 MAIV-100 TUBE $346 MAIV-150 TUBE $378 MAIV-200 TUBE $526 VITON SEAL VITON SEAL VITON SEAL COPPER SEAL VITON SEAL VITON SEAL COPPER SEAL PART NUMBER FLANGE OD A B C D SALE MAIVC-075 TUBE $369 MAIVC-100 TUBE $433 MAIVC-150 TUBE $442 MAIVC-200 TUBE $561 MANUAL ANGLE INLINE - NW FLANGES PART NUMBER FLANGE OD A B C D SALE MAIV-0752-NWB NW $342 MAIV-1002-NWB NW $364 MAIV-1502-NWB NW $400 MAIV-2002-NWB NW $562 MANUAL ANGLE INLINE - CONFLAT FLANGE PART NUMBER FLANGE OD A B C D SALE MAIV-0752-CF 1.33 CF $360 MAIV-1002-CF 2.12 CF $387 MAIV-1502-CF 2.75 CF $427 MAIV-2002-CF 3.38 CF $621 PART NUMBER FLANGE OD A B C D SALE MAIVC-0752-CF 1.33 CF $400 MAIVC-1002-CF 2.12 CF $477 MAIVC-1502-CF 2.75 CF $481 MAIVC-2002-CF 3.38 CF $634 PNEUMATIC ANGLE INLINE - NO FLANGES PART NUMBER FLANGE OD A B C LIST SALE PAIV-075 TUBE $395 $342 PAIV-100 TUBE $430 $387 PAIV-150 TUBE $475 $427 PAIV-200 TUBE $640 $576 PAIV-250 TUBE $845 $759 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC ANGLE INLINE - NW FLANGES PART NUMBER FLANGE OD A B C LIST SALE PAIV-0752-NWB NW $415 $354 PAIV-1002-NWB NW $450 $405 PAIV-1502-NWB NW $500 $449 PAIV-2002-NWB NW $680 $612 PAIV-2502-ISO ISO $945 $880 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC ANGLE INLINE - CONFLAT PART NUMBER FLANGE OD A B C LIST SALE PAIV-0752-CF 1.33 CF $425 $332 PAIV-1002-CF 2.12 CF $475 $405 PAIV-1502-CF 2.75 CF $495 $427 PAIV-2002-CF 3.38 CF $745 $678 PAIV-2502-CF 4.50 CF $995 $894 AIR TO OPEN, SPRING TO CLOSE 73

74 VITON SEAL PART NUMBER FLANGE MANUAL GATE VALVES PORT ID CONDUCTANCE L/S (MAX) A B C THREAD PRICE MGV-133-V 1.33 CF $1155 MGV-275-V 2.75 CF /4-28 $1207 MGV-338-V 3.38 CF /16-24 $1617 MGV-450-V 4.50 CF /16-24 $1785 MGV-462-V 4.62 CF /16-24 $1942 MGV-600-V 6.00 CF /16-24 $1974 MGV-800-V 8.00 CF /16-24 $2509 COPPER SEAL VITON SEAL VITON SEAL PART NUMBER FLANGE PORT ID CONDUCTANCE L/S (MAX) A B C THREAD PRICE MGV-133-C 1.33 CF $1181 MGV-275-C 2.75 CF /4-28 $1260 MGV-338-C 3.38 CF /4-28 $1785 MGV-450-C 4.50 CF /16-24 $1984 MGV-462-C 4.62 CF /16-24 $2089 MGV-600-C 6.00 CF /16-24 $2730 MGV-800-C 8.00 CF /16-24 $3255 PART NUMBER FLANGE PORT ID CONDUCTANCE L/S (MAX) A B C THREAD PRICE MGV-NW16-V NW N/A $1155 MGV-NW40-V NW N/A $1207 MGV-NW50-V NW N/A $1617 PART NUMBER FLANGE PORT ID CONDUCTANCE L/S (MAX) A B C THREAD PRICE MGV-ISO63-V ISO N/A $2520 MGV-ISO80-V ISO N/A $2493 MGV-ISO100-V ISO N/A $3018 Viton is a registered trademark of DuPont Dow Elastomers MANUALLY OPERATED GATED VALVES General Purpose Electropolished Stainless Steel Provide high conductance within a compact design Shock-free operation with minimum vibration 100,000-cycle service before requiring maintenance Vacuum brazed at 1100 C to ensure reliable operation at HV and UHV pressures Viton Seal ATM to 10-9 torr pressure range Bakeable up to 150 C (in the open position) Copper Gasket ATM to torr pressure range Bakeable up to 200 C (with actuator removed) 74

75 MANUAL BALL VALVES - NW PORTS PART NUMBER PORT A B C D E LIST SALE VACUUM ESSENTIALS LDS-KMBV-1075-NW16 NW $275 $190 KMBV-NW16-VE $200 LDS-KMBV-1100-NW25 NW $590 $279 KMBV-NW25-VE $289 LDS-KMBV-1150-NW40 NW $685 $341 KMBV-NW40-VE $351 LDS-KMBV-1200-NW50 NW $800 $399 KMBV-NW50-VE $409 2 Wing Clamps (CW) & 2 SS/Viton Centering Rings (SRV) MANUAL BALL VALVES - TUBE END PORTS PART NUMBER PORT A B C D E LIST SALE BUY ONE GET ONE FREE LDS-KMBV-1075-TE $240 $150 KMBV-1075-TE $150 LDS-KMBV-1100-TE $360 $205 KMBV-1100-TE $205 LDS-KMBV-1150-TE $600 $300 KMBV-1150-TE $300 LDS-KMBV-1200-TE $745 $350 KMBV-1200-TE $350 TUBE END BALL VALVES ARE BUY ONE GET ONE FREE! KMBV SERIES BALL VALVE - SEAL KITS PART NUMBER BALL VALVE SIZE Kit Description LIST SALE LDS-KMBV-NW16-SKT 0.75 Seal Kit $59 $20 NW16 LDS-KMBV-NW16-RKT Tube End Repair Kit With Ball $97 $30 LDS-KMBV-NW25-SKT 1.00 Seal Kit $59 $25 NW25 LDS-KMBV-NW25-RKT Tube End Repair Kit With Ball $97 $35 LDS-KMBV-NW40-SKT 1.50 Seal Kit $59 $35 NW40 LDS-KMBV-NW40-RKT Tube End Repair Kit With Ball $97 $45 LDS-KMBV-NW50-SKT 2.00 Seal Kit $59 $35 NW50 LDS-KMBV-NW50-RKT Tube End Repair Kit With Ball $97 $50 KMBV SERIES 316 Forged Stainless Viton stem seal Teflon ball seal 316 stainless ball Large conductance Rated for vacuum 1x10-9 cc/second (helium) DON T WANT TO REBUILD YOUR VALVE? CONTACT LDS AND WE WILL DO IT FOR YOU! $50 + KIT Pneumatic Ball Valves Available Viton is a registered trademark of DuPont Dow Elastomers 75

76 SNIFFER PROBES INCLUDED - JUST ASK AT TIME OF RENTAL! SHORT TERM LEAK DETECTOR RENTALS Model Sensitivity Pumping Capacity Inlet Weight Alcatel ASM142 1x m 3 /h (6 cfm) NW lbs. Helium background suppression with floating zero Talking leak detector, Speaks 4 languages Model Sensitivity Pumping Capacity Inlet Weight Alcatel ASM182TD+ 5x10-12 to 10-1 mbar l/s 25 m 3 /h (15 cfm) NW lbs. DRY Leak Detector - No oil pumps Discrete IO and RS-232 Talking leak detector, Speaks 4 languages Model Sensitivity Pumping Capacity Inlet Weight Leybold PhoeniXL 300 5x10-12 to 10-1 mbar l/s 3 m 3 /h (3 cfm) NW25 80 lbs. Detects helium masses 2, 3 and 4 Light weight PURCHASE THIS UNIT, SEE PAGE 37 LOW COST Light Weight SEARCH & LOCATE Leak Detector For Sniffing Applications... Helium Sensitivity: 2x10-5 cc/second NIST Traceable Multiple Gas Selection Auto-Range/Zero Detector: Micro volume thermal conductivity cell Accuracy: +/-5% Displayed reading - One digit Temperature: -20 o C to 60 o C Flow Rate: 2 cc/min Response: 1 second with 1 second clear downtime Dimensions: L = 15 x W = 2.5 x D = 2 Batteries supplied: 4 AA Battery Life: 40 hours (typical unit) FREE Storage Case Weighs Only 1.1 Lbs. Also available with sniffer style calibrated leaks MODEL WEEKLY RENTAL MONTHLY RENTAL Alcatel ASM142 $575 $2000 Alcatel ASM182TD+ $700 $2400 Leybold PhoeniXL 300 $575 $2000 A $125 clean-up fee applies to all leak detector rentals. Standard Features ASM142, ASM182TD+ and PhoeniXL Auto Calibration Internal Calibrated Leak Startup within 3 minutes or less Sniffer probe included Calibration certificate traceable to NIST Rent Me $190 In Stock Ar CH 4 He R12 2x10-4 cc/sec 1x10-4 cc/sec 2x10-5 cc/sec 1x10-4 cc/sec LDS HAS A HUGE RENTAL FLEET WITH OVER 35 UNITS! 76

77 VISIT - DON T SEE IT? ASK ALCATEL (adixen) VACUUM PRODUCTS Parts and Services FILAMENTS Description LDS Part # Price New $152 Exchange (Rebuilt filament) R $99 ELECTRON COLLECTORS Description LDS Part # Price Single filament collector $19 Dual filament collector $20 MORE COMPONENTS Description LDS Part # Price Lead Wire $45 Lubricating syringe $71 Circuit board sensor only $100 Calibration Valve $100 Elastomer Seal $251 LDS $50 Try the LDS LOW COST Elastomer Seal - SAVE 80% Operator valve $169 Remote, ASM182/ $700 Seal Kit, ASM180T 30144K $38 180T Valve, DN $517 Valve Solenoid Coil $338 Pirani gauge tube $190 Sniffer probe $500 CALIBRATED LEAKS Description LDS Part # Price FE14 without valve $455 FE24 with valve $640 Internal (180 series) autocal $530 No valve, circuit board sensor - Former Part Number Internal (180 series) autocal $530 No valve, circuit board sensor - New Part Number NIST Traceable Calibration Certificate N/C A2LA Accredited Calibration Service N/C LDS style calibrated leaks with stainless canister (repairable calibrated gas leaks) BEARING CHANGES MDP s (most models) $1150 Turbopumps (most models) $1150 Bearings only also available from LDS. Contact us with your model number - $495.00/PAIR PUMPS Description LDS Part # Price Kit Minor 2004/8/12/ $112 Kit Minor 2005/10/15/ $119 Oil Mist Eliminator $131 5 PK, Cartridges For $50 EXCHANGES AND REPAIRS PreAmp - Repaired at LDS $850 PreAmp - Rebuilt, no exchange* $2100 Boards - ALL leak detectors POR MANY OTHER ALCATEL SPARES AVAILABLE JUST ASK! Alcatel 120/121/180 Series Main Panel Display Switches and Covers Switch Cover Only Solid ALC-SCO-S $4 LED Hole ALC-SCO-LED $4 Switch and Cover Assembly Solid ALC-SCA-S $14 LED ALC-SCA-LED $19 LDS ELASTOMER SEAL LDS List: $251 LDS: $50 LDS EXCLUSIVE - SAVE 80% LDS HAS HARD TO FIND SPARE PARTS FOR OLDER UNITS MANY ALCATEL SPARES AVAILABLE FROM LDS - DON T SEE IT? ASK 77

78 LEAK TESTING LET LDS DO THE WORK FOR YOU! DON T BUY, RENT! SAVE MONEY ON-SITE LEAK TESTING Man and Machine or using your equipment IN-HOUSE LEAK TESTING SEND LDS YOUR PRODUCTS Includes part leak test certification No project too large or too small Level III NDT Certified Technicians $95 per hour - 2 Hour Minimum Estimates given BEFORE work begins LDS can even make your leak test fixture LARGE RENTAL FLEET WE RENT EVERYTHING! LDS VACUUM SERVICES LET LDS REBUILD YOUR VACUUM PUMP LDS MANUFACTURES CUSTOM FLANGES, COMPONENTS CHAMBERS & MANIFOLDS In-House Pump Rebuilding... Fast Turn around and Low Prices Try the LDS ON-SITE PUMP REBUILDING Service For Hard To Transport Large Pumps LOW PRICES and FAST TURNAROUND SEND US YOUR SPECIFICATIONS! LDS VACUUM TRIVIA... LDS WAS ESTABLISHED IN WE ARE A 100% WOMAN OWNED COMPANY. LDS HAS VACATION SHUTDOWNS TWICE A YEAR (JULY & DECEMBER). 78

79 ADAPTORS - CONICAL REDUCERS HOSE AND TUBING VALVES FLANGE TO FITTING CF to CF 65 Adaptors, NW 34 Bakeable 70 Adaptive Ring 23 CF to ISO 45 Flexible Metal - CF 64 Ball 75 Adaptive Tee - NPT 26 CF to NW 38 Flexible Metal - ISO 45 Gate 74 Hose Adaptor 34 ISO to ISO 45 Flexible Metal - NW 36 Industrial 71 NPT, Female - NW 26 ISO to NW 37 Flexible Metal - Reducing 36 Inline 72 NPT, Male - NW 27 NW to NW 37 PVC - Wire Reinforced 34 Inline, Angle 73 Quick Coupling - CF 58 Weld Bodies 66 Tubing, 304 S/S 68 Right Angle 70 Quick Coupling - ISO 47 COUPLINGS LEAK DETECTOR VARIAN (Equivalent Products) Quick Coupling - NW 39 Quick Disconnect, CF 58 Alcatel (Adixen), Spares 77 Gas Leaks - Diffusion 16 Rotatable Bolt Ring - ISO 41 Quick Disconnect, ISO 47 Gas Check - Hand Held 76 Gas Leaks - Adjustable 17 Swagelok - CF 62 Quick Disconnect, NW 39 Gas Leaks 16 Ion Gauges, Glass 13 Swagelok - NW 33 Quick Disconnect, Tube 69 Hydrogen 62 Ion Gauges, Nude 12 Test Port - NW 39 Plugs 69 Oerlikon LEYBOLD 53 Mini Nude 12 VCO - CF 63 CROSSES Rentals 76 TorrSeal Equivalent 4 VCO - NW 33 4-WAY, 5-WAY, 6-WAY Spray Probe, Helium Tank 64 VCO VCR - CF 63 CF 60 Test Port Adaptor 38 CF 63 VCR - NW 32 ISO 47 Varian Mini Nude Gauge 12 NW 33 Welch Pump To NW 3 NW 30 MASS FLOW CONTROLLERS 10 VCR ADAPTORS - Weld Bodies 68 NIPPLES CF 63 FLANGE TO FLANGE CROSSES, REDUCING Conflat 64 Glands 32 Reducers - CF to CF 65 CF to CF 60 ISO, Bolted 41 Nuts 32 Reducers - CF to ISO 45 CF to NW 31 ISO, Claw Clamp 44 NW 32 Reducers - CF to NW 38 ISO to ISO 47 NW 35 WELCH Reducers - ISO to ISO 45 ISO to NW 31 NIPPLES, REDUCING Kits 3 Reducers - ISO to NW 37 NW to NW 30 CF to CF 65 Pump Adaptors 3 Reducers - NW to NW 37 Weld Bodies 68 CF to ISO 45 WELD BODIES BLANKS CUBES 61 CF to NW 38 Conical Reducers 66 Conflat - See Below ELBOWS ISO to ISO 45 Crosses 68 ISO, Bolted Style 41 Conflat 59 ISO to NW 37 Elbows 67 ISO, Claw Clamp Style 43 ISO 46 NW to NW 37 Tees 66 NW 24 NW 28 O-RINGS WELD FLANGES CALIBRATION SERVICES Reducing 28 ISO 42 SHORT WELD A2LA Scope 14 Weld Bodies 67 NW 22 ISO, Bolted 41 Gas Leaks & Gauges 15 FEEDTHROUGHS OVERPRESSURE RINGS 23 ISO, Claw Clamp 44 CLAMPS Baseplate, Blank Plug 19 PLASTIC CAPS NW 25 Hose 34 Custom, Electrical 18 CF 50 SHORT WELD STUB ISO 43 Glovebox 19 ISO 40 ISO, Claw Clamp 44 NW 21 Single & Dual Tube 19 NW 31 NW 25 CENTERING & SCREENED RINGS Temperature, High 18 PUMPS PAGES WORTH REMEMBERING ISO 42 Thermocouple 18 Kits - Alcatel/Adixen 7 A2LA Scope of Accreditation 14 NW 22 USB, Video 19 Kits - Leybold 3 Conflat Flange Information 48 CONFLAT FLANGES Fluids - Oil 5 Kits - Varian 4 Gauges, Typical Pressures 12 Conflat Dimensional Info 48 GAS LEAKS Kits - Welch 4 ISO Dimensional Information " Flanges and Hardware 49 Diffusion Style 16 Mechanical - New (Leybold) 2 NW Dimensional Information " Flanges and Hardware 50 Capillary Style 17 Mechanical - New (Edwards) 35 Vacuum Pressure Chart " Flanges and Hardware 51 Calibration & Repair Service 15 Oil Mist Eliminators " Flanges and Hardware 52 GAUGES Pumping Station " Flanges and Hardware 53 Calibration Service 15 Welch Adaptors " Flanges and Hardware 54 Compound 11 TEES 6.00" Flanges and Hardware 55 Ion Gauge, Glass (all) 13 Adaptive (NPT) " Flanges and Hardware 55 Ion Gauge, Nude 12 CF " Flanges and Hardware 56 Thermocouple 11 ISO " Flanges and Hardware 56 LUBRICANTS, SEALANTS NW " Flanges and Hardware 57 Anti-Seize 54 Weld Body " Flanges and Hardware 57 Krytox Equivalent 4 TRAPS 14.00" Flanges and Hardware 57 Sealant, High Vacuum 4 Coaxial " Flanges and Hardware 57 Silicone Grease, High Vacuum 4 Molecular Sieve " Flanges and Hardware 57 TorrSeal Equivalent 4 Oil Mist Eliminators 6 79

80 PAGE 73 PAGES PAGE 16 PAGE 75 PAGE 58 PAGE 61 VACUUM ESSENTIALS COMBINING PRODUCTS TO SAVE EVEN MORE! PAGE 11 PAGE 71 PAGE 41 PAGE 26 PAGE 58 PAGE 45 PAGE 13 HYDROGEN LEAK TESTING PAGE PAGE 21 PAGES LDS VACUUM PRODUCTS, INC. 773 Big Tree Drive Longwood, FL PAGES PAGE 67 TURBO PUMP STATIONS 773 BIG PAGE TREE DRIVE, 8 LONGWOOD, FLORIDA PHONE: (407) FAX: (407)