VACUUM THE VACUUM SHOPPER

Transcription

1 VACUUM THE VACUUM SHOPPER Open 24/7 For On-Line Shopping-Free Shipping! 2011 Mechanical Pumps Rental Equipment PAGE 2 PAGE 35 RENTAL EQUIPMENT - PAGE 76 Vacuum Gauges Power Feedthroughs PAGE 15 PAGE 13 PAGE 12 PAGE 8-10 CALIBRATION SERVICES Fluids Spares CALIBRATION LABORATORY: PAGE 4-5 PAGE 77 GASKETS CUBES PAGES PAGE 58 PAGE 61 VACUUM ESSENTIALS-COMBINING PRODUCTS TO SAVE EVEN MORE! Valves Pages Double-Sided CF Page 58 Weld Flanges Pages Way Crosses Page 28

2 oerlikon leybold vacuum MECHANICAL PUMPS MECHANICAL PUMPS D4B D8B D16B D25B D40B D65B Actual Pumping Speed (CFM) Noise Level db(a) Motor (HP) Pump Rotational Speed (RPM) Minimum Oil Capacity 0.32 qt 0.32 qt 0.50 qt 0.5 qt 1.8 qt 2.1 qt Maximum Oil Capacity 0.85 qt 0.95 qt 1.10 qt 1.5 qt 2.7 qt 3.4 qt Inlet Exhaust Flange NW16 NW16 NW25 NW25 NW40 NW40 Weight (lbs) Price $2224 $2489 $3256 $4380 $6880 $8795 Dual Voltage Motor 1-Ph, 50/60 Hz X X /460 volt, 3-Ph, 50/60 Hz Visit for detailed information on these pumps oerlikon Leybold Pump Rebuild Kits Model Minor Kit Major Kit (Minor Kit PLUS Vanes) D4A LEY-D4A-SK $120 LEY-D4A-MKV $210 D4B LEY-D4B-SK $140 LEY-D4B-MKV $234 D8A LEY-D8A-SK $135 LEY-D8A-MKV $238 D8B LEY-D8B-SK $140 LEY-D8B-MKV $249 D16A LEY-D16A-SK $135 LEY-D16A-MKV $262 D16B LEY-D16B-SK $160 LEY-D16B-MKV $274 D25B LEY-D25B-SK $160 LEY-D25B-MKV $286 D40B LEY-D40B-SK $229 LEY-D40B-MKV $327 D65B LEY-D65B-SK $229 LEY-D65B-MKV $363 MORE LEYBOLD PUMP KITS AVAILABLE ONLINE LET LDS REBUILD YOUR VACUUM PUMP SAVE TIME AND MONEY! In-House Pump Rebuilding... Fast Turn around and Low Prices Try the LDS ON-SITE PUMP REBUILDING Service For Hard To Transport Large Pumps 2

3 REBUILD KITS FOR ALCATEL EDWARDS LEYBOLD PFEIFFER WELCH VARIAN VACUUM PUMPS AVAILABLE ONLINE VARIAN VACUUM PUMPS - REBUILD KITS Model Minor Kit Major Kit (Minor Plus Vanes) DS102 VAR-DS102-SK $129 VAR-DS102-MKV $249 DS202 VAR-DS202-SK $129 VAR-DS202-MKV $289 DS302 VAR-DS302-SK $129 VAR-DS302-MKV $289 DS402 VAR-DS402-SK $139 VAR-DS402-MKV $349 DS602 VAR-DS602-SK $139 VAR-DS602-MKV $349 WELCH VACUUM PUMPS - REBUILD KITS Model Shaft Seal Kit Minor Kit Major Kit (Minor Plus Vanes) D-DR $58 WEL-1373-SK $231 WEL-1373-MKV $ F-DR $139 WEL-1374-SK $182 WEL-1374-MKV $ D-DR $58 WEL-1376-SK $108 WEL-1376-MKV $ D-DR $58 WEL-1380-SK $179 WEL-1380-MKV $ F-DR $139 WEL-1397-SK $216 WEL-1397-MKV $ E-DR $54 WEL-1399-SK $81 WEL-1399-MKV $ E-DR $58 WEL-1400-SK $104 WEL-1400-MKV $ D-DR $58 WEL-1402-SK $99 WEL-1402-MKV $ E-DR $54 WEL-1403-SK $67 WEL-1403-MKV $ E-DR $58 WEL-1404-SK $89 WEL-1404-MKV $ E-DR $58 WEL-1405-SK $87 WEL-1405-MKV $ E-DR $58 WEL-1410-SK $65 WEL-1410-MKV $ E-DR $58 WEL-8806-SK $73 WEL-8806-MKV $ E-DR $58 WEL-8811-SK $73 WEL-8811-MKV $ E-DR $58 WEL-8814-SK $73 WEL-8814-MKV $ A 8917K03 $79 WEL-8907A-SK $201 WEL-8907A-MKV $ A 8917K03 $79 WEL-8912A-SK $201 WEL-8912A-MKV $309 PUMP SCHEMATICS AVAILABLE ONLINE FREE MANUAL AVAILABLE WITH YOUR PUMP KIT PURCHASE - JUST ASK WELCH PUMP ADAPTORS THREAD SERIES WELCH PUMP MODEL PART NUMBER EACH 5 / 8 "-18 Old-Style 1399, 1400, 1410 NW WP1 $49 ¾ -20 Old-Style 1405 NW WP2 $49 New-Style 1399, 1400, 1405 NW16-WP-NS $ , 1402, 1403, 8806 Old-Style 1" , 8816, 8821 NW WP1 $59 New-Style 1373, 1376, 1380, 1402 NW25-WP-NS $89 1½"-20 Old-Style 1373, 1376, 8831 NW WP1 $69 Old-Style 1374, 1397, 8851 NW WP2 $79 1¾ -20 NEW STYLE: New-Style 1397 NW40-WP-NS $119 OLD STYLE: REPLACEMENT INLET HOSE CONNECTOR Oil sight glass pressed into Oil sight glass held in OLD STYLE INCLUDES METAL GASKET pump body place with a bolt ring PUMP DESIGN CHANGES BY THE MANUFACTURER 3

4 PTFE AND HALOCARBON PASTE/GREASE P - OXYGEN COMPATIBLE Joint and Thread Sealer HIGH VACUUM Torr Applications Blended formula of PTFE particles & Halocarbon oil, producing a superior sealant that is chemically inert & environmentally safe. Leak tight sealing in a wide range of vacuum requirements. EXTREME TEMPERATURES Cryogenic to +450ºF Compare To Krytox Grease! Compatible with many aggressive chemicals BAM certified gaseous & liquid oxygen service Easy to apply Water Proof Anti-Galling Anti-Corrosive Anti-Seize Chemically Inert Non-Toxic Non-flammable Non-Migrating Odorless Dielectric Lubricating Not recommended for aluminum against aluminum applications. Do not use with concentrated alkalis, fluorine (liquid) or chlorine trifluoride (liquid). Female NPT Page 30 OC FIVE OC SEVEN (GREASE) (PASTE) 2 oz. Jar $52 2 oz. Jar $59 16 oz. Jar $ oz. Jar $324 PTFE AND HALOCARBON PASTE P - OXYGEN COMPATIBLE Joint and Thread Sealer MEDIUM VACUUM Torr Applications EXTREME TEMPERATURES -400ºF to +500ºF BAM certified gaseous & liquid oxygen service Seals oxygen and acetylene cylinder valves Compatible with many aggressive chemicals Easy to apply Water Soluble Anti-Galling Anti-Corrosive Anti-Seize Chemically Inert Non-Toxic Non-Flammable Non-Migrating Odorless Compare to Dow Corning High Vacuum Grease OC THREE (PASTE) 4 oz. Tube $26 ACUUM GREASE HIGH VACUUM 10-7 Torr Applications Maintains consistency from -30ºF to +500ºF LDS 91-S SILICONE VACUUM V GREASE 2 oz. Jar DR $9 4 oz. Jar DR $ oz. Tube DR $19 1 lb. Jar DR $43 TORR SEAL EQUIVALENT EXACT VARIAN EQUIVALENT TORR SEAL EQUIVALENT WORKS WITH: Metals Ceramics Glass Epoxy resin conveniently seals leaks on any type of vacuum system or component. It is solvent-free and can be used at pressures of 10-9 Torr (mbar) and below, at temperatures from -45ºC to 120ºC (bakeable temperature). 4 oz. Kit VAR $15 4 oz Kit Contains 2.8 oz resin 1.2 oz hardener Torr Seal is a registered trademark of Varian, Incorporated TORR SEAL EQUIVALENT is NO LONGER AVAILABLE FOR INTERNATIONAL EXPORT due to dangerous goods classification adopted by countries outside of the United States. 4

5 VACUUM PUMP FLUIDS LDS 19 - Mechanical Pump Fluid General Purpose Mechanical Pump Fluid. Recommended for use in non-corrosive applications. Vapor 25ºC: 1x10-5 torr LDS 20 - Mechanical or Diffusion Pump Fluid General purpose mechanical pump fluid used in applications involving corrosive or reactive gases Elite A - Direct Drive Mechanical Pump Fluid Molecular structures are unique and provide excellent chemical inertness and high temperature stability. Vapor 25 C: 1x10-7 Torr 40 C: 48 cst Elite Z - Direct Drive - Mechanical Pump Fluid Molecular structures are unique and provide excellent chemical inertness and high temperature stability. Vapor 25 C: 1x10-7 Torr 40 C: 55 cst LDS (Octoil S) - Diffusion Pump Fluid Ultimate pressure of 10-8 Torr and can be used in diffusion pumps whenever pressures of 10-7 Torr or below are required. LDS Silicone Diffusion Pump Fluid Designed for fast pumping of large volumes of gas or vapor in production operations. It can produce high vacuum in the range of 10-5 to 10-7 torr. Low cost equivalent to Dow Corning DC 702 LDS Silicone Diffusion Pump Fluid For high vacuums of 10-6 torr (untrapped) and 10-8 (trapped). Low cost equivalent to Dow Corning DC 704 LDS Silicone Diffusion Pump Fluid Designed for ultra-high vacuum applications in the range of 10-9 to torr (untrapped). Low cost equivalent to Dow Corning DC 705 SantoVac 5 - Diffusion Pump Fluid Polyphenyl ether synthetic diffusion pump fluid capable of producing ultra-high vacuum in the torr range. Used in many Varian leak detectors. Flushing Fluid Solvent free hydrocarbon flushing fluid designed to be used as part of a preventive maintenance program. Periodic use of Flushing Fluid will enable the user to remove contaminants and particulates from within all areas of the pump without the worry of contaminating the pump with an expensive solvent. Silver Grade 1600 F (870 C) LDS SALE: $20 Gallon 5-Gallons Gallon 5-Gallons DR DR DR DR $24 $103 $75 $325 Gallon DR $130 Gallon DR $ cc 500cc 500cc Gallon 100cc 500cc 1000cc Gallon 100cc 500cc Gallon 65cc 100cc 130cc 500cc Gallon 5-Gallons ANTI-SEIZE STICK GREAT FOR CONFLAT FLANGES! Protects metal parts in high heat environments Prevents rust, corrosion, seizing and eases disassembly Reduces friction and wear to critical parts Buttery texture ideal for both coarse and fine threads Exceptional lubrication properties 20 Gram Stick DR DR DR DR DR DR DR DR DR DR DR DR DR DR DR DR DR $25 $80 $100 $570 $30 $115 $215 $595 $60 $225 $892 $140 $178 $212 $789 $23 $97 Copper Grade 1800 F (982 C) LDS SALE: $20 5

6 MOLECULAR SIEVE TRAPS Part Number Ports OAL A B SALE Vacuum Essentials MST-NW16x4 NW $385 MST-NW16-VE $395 MST-NW25x4 NW $395 MST-NW25-VE $405 MST-NW40x4 NW $420 MST-NW40-VE $432 MST-NW50x4 NW $445 MST-NW50-VE $457 Above Price is For Trap Only & 1 lb of Sieve Charge ST-Z13x10 Molecular Sieve Charge $24 4" diameter trap heater rates at 120V, 125W Integral 115VAC regeneration heater Glass-bead blast finish Includes 1 lb. can of sieve material zeolite pellets ESSENTIALS INCLUDES 2 Centering Rings (SR-V) 2 Clamp Wing Clamps (CW) COAXIAL FORELINE TRAPS - REFILLABLE Part Number Ports Height Body OAL Clamp OD Sale Vacuum Essentials CFTR-NW16x4 NW $265 CFTR-NW16-VE $325 CFTR-NW25x4 NW $275 CFTR-NW25-VE $335 CFTR-NW40x4 NW $310 CFTR-NW40-VE $372 CFTR-NW50x4 NW $341 CFTR-NW50-VE $405 Above Price is For Trap Only & Installed Element ESSENTIALS INCLUDES 2 Ring & Clamp Assemblies Spare Metal Wool Element Foreline vapor trap Stainless Metal Wool Element Glass-bead blast finish COAXIAL FORELINE TRAPS - SEALED Part Number Ports Body OAL Sale Vacuum Essentials CFTS-NW16x4 NW $177 CFTS-NW16-VE $187 CFTS-NW25x4 NW $183 CFTS-NW25-VE $193 CFTS-NW40x4 NW $214 CFTS-NW40-VE $226 CFTS-NW50x4 NW $224 CFTS-NW50-VE $236 Foreline vapor trap ESSENTIALS INCLUDES Stainless Metal Wool Element - Non-replaceable 2 Ring & Clamp Assemblies Glass-bead blast finish Once unit is saturated, must be discarded OIL MIST ELIMINATOR - SMALL CFM PUMPS Part Number Ports CFM Sale Vacuum Essentials LDS NW16 NW16 5 CFM & Smaller $91 5CFM-NW16-VE $98 LDS NW25 NW25 5 CFM & Smaller $97 5CFM-NW25-VE $105 Above Price is For Eliminator Only & Installed Element Once unit is saturated, must be discarded ESSENTIALS INCLUDES 1 Ring & Clamp Assembly OIL MIST ELIMINATOR - 20 CFM & SMALLER Part Number Ports CFM Sale Vacuum Essentials ALC CFM & Smaller $131 ALC VE $178 ALC Replacement Filters, 5 Pack $50 2 Ring & Clamp Assemblies 5 Replacement Filters Above Price is For Eliminator Only & Installed Element This oil mist eliminator is mounted at the exhaust of the rotary vane pump and separates oil droplets and vapors in the exhaust gases emitted by the oil sealed vacuum pumps. For use with standard mechanical NOT chemical series. 6

7 vcube and VariCube Multi-Purpose Vacuum Pumping System Designed for REAL WORKING ENVIRONMENTS, not just ideal ones! vcube- A highly rugged system that can be mounted in any position. Real world working environment means the unit can be moved or impacted while in operation. Better yet, it can recover if accidentally vented to atmosphere. VariCube- High pumping speeds, utilizing either a 70 or 260 l/s turbo pump which is backed by a variable flow oil-free roughing pump. The roughing pump is selectable between 1 or 3CFM at anytime for maximum flexibility or low power consumption. Mountable In Any Configuration Small and Lightweight Movable While In Operation Extremely Rugged, Impact Resistant Oil free Reliable and Diverse EASY OPERATION Choose between rough or high vacuum features Pumping Speed vcube VariCube 80 VariCube 80 Nitrogen 11 l/s 67 l/s 260 l/s Compression Ratio Helium 6 l/s 58 l/s 255 l/s Hydrogen 37 l/s 48 l/s 220 l/s Nitrogen 3 x x Helium 3 x x x10-8 Hydrogen 3 x x x 10-5 Ultimate Pressure 10-6 mbar mbar mbar Backing Pump 0.4 CFM Variable CFM Variable CFM Power 115 or 220 Dual Voltage Dual Voltage Dimensions 8 x 8 13 x x 13 Price $6900 $8900 $13500 vcube VariCube 80 VariCube 300 Inlet Part No. vcube Voltage Inlet Part No. NW40 V Inlet Part No. 115 VAC NW25 V ISO63 V ISO100 V VAC NW25 V010107A 4.50 CF V CF V LET LDS BUILD YOUR PUMPING STATION or LEAK TEST STAND CONTACT OUR ENGINEERING DEPARTMENT TODAY! 7

8 MICRODOT/BNC TO FLANGE FEEDTHROUGH Microdot BNC Flange A PART NUMBER PRICE 1 NW NW16-BNCxMD $270 1 NW NW25-BNCxMD $324 1 NW NW40-BNCxMD $330 1 NW NW50-BNCxMD $ CF BNCxMD $ CF BNCxMD $324 NW Flange 1 BNC/Microdot Connector 2 NW NW40-BNC2xMD2 $462 2 NW NW50-BNC2xMD2 $ CF BNC2xMD2 $ OD Conflat Flange 3 BNC/Microdot Connectors 3 NW NW40-BNC3xMD3 $556 3 NW NW50-BNC3xMD3 $ CF BNC3xMD3 $509 4 NW NW40-BNC4xMD4 $556 4 NW NW50-BNC4xMD4 $ CF BNC4xMD4 $592 5 NW NW50-BNC5xMD5 $ CF BNC5xMD5 $684 6 NW NW50-BNC6xMD6 $ CF BNC8xMD8 $935 MICRODOT/BNC QUICK COUPLING TO FLANGE FEEDTHROUGH Flange and Quick Coupling A PART NUMBER PRICE NW40 x (2) 1/8 QC 2.43 NW40-Q12x2-BNCxMD $396 NW40 x (2) 3/16 QC 2.43 NW40-Q18x2-BNCxMD $408 NW40 x (2) 1/4 QC 2.43 NW40-Q25x2-BNCxMD $420 1 BNC / Microdot Connector 275 x (2) 1/8 QC 275-Q12x2-BNCxMD $ x (3) 1/8 QC Q12x3-BNCxMD $575 1 BNC / Microdot Connector 275 x (3) 1/8 QC 275-Q12x3-BNC2xMD2 $598 2 BNC / Microdot Connector NW TO BASEPLATE FEEDTHROUGH A B C PART NUMBER PRICE NW FT $ NW FT $239 MORE FEEDTHROUGHS ONLINE 8

9 FLUID & AIR TUBE COMBINATION FEEDTHROUGHS Microdot BNC Fluid Tubes Air Tubes Flange PART NUMBER PRICE 1 2 NW25 NW25-LFT2-BNCxMD $ NW40 NW40-LFT2-BNCxMD $ NW40 NW40-LFT2-BNCxMD-AT $ NW40 NW40-LFT2-BC2xMD2-AT $492 1 BNC/MICRODOT 2 Fluid Tubes CF 275-LFT2-BNCxMD $ CF 275-LFT2-BNC2xMD2 $ CF 275-LFT2-BNC2xMD2-AT $ CF 275-LFT4-BNC2xMD4 $ CF 275-LFT3-BNCxMD $ OAL 1 BNC/MICRODOT 2 Fluid/1 Air Tube CF 275-LFT4-BNC2xMD2 $ CF 275-LFT4-BNC4xMD4 $756 NW TO SINGLE OR DUAL TUBE Fluid Tubes A B Flange PART NUMBER PRICE 1 NW FT-ST $ NW25 2 NW FT-DT $135 1 NW FT-ST $ NW40 2 NW FT-DT $170 Liquid or Gas Applications - Custom Lengths Available BLANK PLUG FEEDTHROUGH Material Hole ID Plug ID PART NUMBER PRICE Brass FTB-075-B $ Stainless Steel FTB-075-S $89 Aluminum FTB-100-A $56 Brass FTB-100-B $56 Stainless Steel FTB-100-S $89 Brass FTB-125-B $ Stainless Steel FTB-125-S $134 Brass FTB-150-B $ Stainless Steel FTB-150-S $141 Brass FTB-175-B $ Stainless Steel FTB-175-S $160 9

10 VISIT LDS-VACUUM.COM FOR MORE FEEDTHROUGHS Power Electrical Signal Thermocouple FEEDTHROUGHS MADE TO ORDER Ordering Information Specify Wire Type and Gauge: Copper Stranded Copper Buss Copper/Constantan Chromel/Alumel Iron/Constantan Chromel/Constantan Specify Wire Gauge Specify Lengths (inches): Length Inside (vacuum) Length Outside (atmospheric) Wire Type and Gauge (stocked) Thermocouple: 24 gauge Copper: 28 to 12 gauge Special Orders Available Standard Temperature Range: -40 o F to 200 o F Consult factory for quotations on feedthroughs outside this temperature range Download And Fill Out Request For Quote Form At SERCOSEAL.COM HIGH TEMPERATURE FEEDTHROUGHS Standard feedthroughs include NPT UNF/Facial "O" ring and ISO-KF stainless steel bodies utilizing our hermetic sealing system. This system does not rely on epoxy for sealing, but employs a swaged elastomer gland. Solid or multi-strand copper conductors are available in sizes from 28 to 12 gauge. Standard thermocouple wire calibrations are stocked in 24 gauge with others available on special order. Teflon installation is used unless otherwise specified. Up to 92 conductors are available in a single feedthrough, depending on fitting and wire sizes. Special Cable or Fitting? No Problem... Send LDS Your Cables or Fitting! Have CUSTOM CABLES Installed in Your Glovebox USB VIDEO CUSTOM GLOVEBOX FEEDTHROUGHS RS232 POWER 10

11 APEX Mass Flow Controllers 30 User Selectable Gases No Separate power supply or readout box required 100 to 1 turndown ratio. Control Up To 26 MFC s with one RS-232 port Calibration: Nitrogen (standard) or choose below Power is provided by 110V Power Cord Accuracy: ± 0.8% of Reading ±0.2% of Full Scale (at calibration conditions after tare) Repeatability: ± 0.2% Full Scale Operating Range: 1% to 100% Full Scale Measure & Control Typical Response Time: 100 Milliseconds (Adjustable) Operating Temperature: -10 to +50º Celsius Zero Shift: 0.02% Full Scale / º Celsius / Atm Span Shift: 0.02% Full Scale / º Celsius / Atm Humidity Range: 0 to 100% Non-Condensing Flow Rate: 102.4% Controllable Full Scale Maximum Pressure: 145 PSIG Input / Output Secondary: 0-5 vdcs Electrical Connections: 8 Pin (Mini Din) Sensitivity to Mounting Attitude: 0% Warm-up Time: < 1 Second Standard Conditions (STP): 25ºC & PSIA (Mass Reference Conditions) Input/Output Signal Standard: RS-232 Serial & 0-5 vdc Air Argon Methane Carbon Monoxide Carbon Dioxide Ethane Hydrogen Helium Nitrogen Nitrous Oxide Neon Oxygen Propane Butane Acetylene Ethylene 0.5 SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SCCM $ SLPM $ SLPM $2965 OPTIONS AVAILABLE Mass Totalizer Pressure & Temperature Secondary Outputs Gas Blends Added on Display 9-Volt Battery powered (mass flow meters) Iso-Butane Krypton Xenon Sulfur Hexafluoride 75% Argon + 25% C02 90% Argon + 10% C02 92% Argon + 8% C02 98% Argon + 2% C02 75% Argon + 25% Helium 75% Helium + 25% Argon 75% CO2 + 25% Argon Helistar A1025 Stargon CS 95% Argon + 5% CH4 TYPICAL GAUGE PRESSURE RANGES - TORR TYPE ATM BOURDON CAPACITANCE MANOMETER COLD CATHODE CONVECTRON DIAPHRAGM ION GAUGE - GLASS (Standard Range) ION GAUGE - GLASS (Broad-Range) ION GAUGE - NUDE (580 SERIES) ION GAUGE - NUDE (UHV-24 SERIES) PIRANI SPINNING ROTOR THERMOCOUPLE ATM TORR 2,000 TORR TORR Over-pressurization renders gauge inoperable (costly repair) 10-2 TORR TORR ATM TORR 1500 TORR TORR 1x10-3 TORR - 2x10-10 TORR Pressures Below 10-8 Use Conflat Flange Port 5x10-2 TORR - 4x10-10 TORR Ensure your controller can read broad-range gauge tubes 5x10-2 TORR - 4x10-10 TORR 1x10-3 TORR - 2x10-11 TORR Ion gauges are also called Hot Filament ATM TORR 800 mtorr - 4X10-7 TORR ATM TORR 1x10-3 = 1 Micron 11

12 THERMOCOUPLE GAUGE READOUTS AND CONTROLLERS MODEL PRICE STANDARD RANGE TUBE POWER MODEL 45-MICRON-531 $364 0 to 1999 Microns VARIAN 531 BATTERY MODEL 100-DV6-BATT $364 0 to 1999 Microns HASTINGS DV-6 BATTERY MODEL 100TC-MICRON-DV6 $379 0 to 1999 Microns HASTINGS DV-6 115VAC MODEL 100TC-MICRON-531 $344 0 to 1999 Microns VARIAN VAC MODEL 200TC-MICRON-531 $382 ATM to 1 Micron VARIAN VAC MODEL 100LED-760SW $ to 760 Torr 760 Tube 115VAC MODEL 100W-DV6-BATT $ Torr to 1x10-3 Torr HASTINGS DV-6 BATTERY MODEL 200TC-TORR-531 $ Torr to 1x10-3 Torr VARIAN VAC MODEL 22W-LCD $ Torr to 1x10-3 Torr VARIAN VAC DUAL SETPOINT THERMOCOUPLE GAUGE - MODEL 215TC-2C Turn on an external device via 2 SPDT external connections allowing controls to be activated at 2 vacuum set-points. The relays activate at and remain on below the set-points. MODEL 215TC-2C $ to 760 Torr VAC VARIAN 531 Torr, mbar or kpa 50/60 Hz DIRECT VARIAN AND HASTINGS REPLACEMENTS Panel Mount - Drop In Replacements 2.66" panel hole on 1.60" radius MODEL DVG-6 $ Millitorr HASTINGS DV6/6R 115VAC MODEL 801-W-TORR-531 $ TORR VARIAN VAC MODEL TORR-531 $ TORR VARIAN VAC All models include thermocouple gauge tube and cable(s) 45-MICRON TORR DV6-BATT DVG-6 215TC-2C Optional: $199 NIST Traceable Calibration Certification Can Be Added To Your SYSTEM Purchase Save $80 CALIBRATION LABORATORY COMPOUND VACUUM/PRESSURE GAUGE TO NW FLANGE FLANGE PART NUMBER PRICE NW16 NW CG $92 NW25 NW CG $96 NW40 NW CG $104 NW50 NW CG $ Hg - 30 PSIG, 304 SS bourdon tube & connections, Easy to read dial 12

13 REPLACEMENT THERMOCOUPLE GAUGE TUBES LDS LOW COST EQUIVALENT MFG MODEL LDS EQUIVALENT EACH ADD FLANGES TO THERMOCOUPLE TUBE COOKE HHT-O TVT-1518 $48 NW SERIES FLANGES CONFLAT FLANGES CVC GTC-004 TVT-1504 $48 -NW16 $ $31 GTC-036 VAC-VGT-600-DR $60 -NW25 $ $36 GRANVILLE VAC-VGT-400-DR $53 -NW40 $ $62 DV-3M (Black) VAC-VGT-300-DR $74 -NW50 $37 Call for other sizes HASTINGS DV-6M (Yellow) VAC-VGT-400-DR $53 DV-23 (Orange) VAC-VGT-800-DR $71 MKS VAC-VGT-400-DR $53 TC-1 VAC-VGT-500-DR $54 F (531) VAC-VGT-500-DR $54 VARIAN F VAC-VGT-500-SS $81 F TVT-1504 $48 VR VAC-VGT-400-DR $53 DV-1M VAC-VGT-300-DR $74 DV-6 VAC-VGT-400-DR $53 VT-1 TVT-1518 $48 VEECO VT-1M TVT-1504 $48 VT-5 VAC-VGT-500-DR $54 STANDARD SERIES NW FLANGE SERIES VT-6 VAC-VGT-600-DR $60 VT-8 VAC-VGT-800-DR $71 WELCH 1515A VAC-VGT-800-DR $71 TVT-1504 $48 TVT-1518 $48 VAC-VGT-300-DR $74 VAC-VGT-400-DR $53 VAC-VGT-500-DR $54 VAC-VGT-500-SS $81 VAC-VGT-600-DR $60 VAC-VGT-800-DR $71 Don t see it? Ask LDS EQUIVALENT LDS NUMBER EACH CONFLAT FLANGE SERIES REPLACEMENT CONVECTRON GAUGE TUBES LDS LOW COST EQUIVALENT TO GRANVILLE PHILLIPS 1/8 MALE NPT LDS $121 NW16 LDS $143 NW25 LDS $153 NW40 LDS $ " OD Conflat LDS $ " OD Conflat LDS $163 1/4 VCR Female LDS $147 1/2 VCR Female LDS $153 13

14 CONVERT FROM PASCAL (newtons/m 2 ) TORR (mm of mercury) ATM (atmosphere) Mbar (millibar) PSI (lb/in 2 ) CONVERSION CHART - VACUUM PRESSURE PASCAL (newtons/m 2 ) 1 TORR (mm of mercury) 7.5 (10-3 ) (10 5 ) (10 3 ) Kg/cm (10 4 ) μ (micron) Mtorr (millitorr) ATM (atmosphere) 9.87 (10-6 ) 1.32 (10-3 ) CONVERT TO: MULTIPLY BY Mbar (millibar) PSI (lb/in 2 ) (10-4 ) (10-2 ) Kg/cm (10-5 ) 1.36 (10-3 ) (10-4 ) 6.8 (10-2 ) (10-2 ) 1.02 (10-3 ) (10-6 ) 1.33 (10-3 ) 1.93 (10-5 ) (10-6 ) μ (micron) Mtorr (millitorr) (10 5 ) (10 4 ) 7.35 (10 5 ) 1 VARIAN STYLE NUDE IONIZATION GAUGES UHV-24 Nude Ion Gauge Tube - Bayard-Alpert Type E-Beam Degas, CAGE GRID CONNECTION FILAMENT(S) PART NUMBER PRICE 2.75 OD Conflat Flange IRIDIUM (Dual) VARIAN EQUIVALENT FILAMENT REPLACEMENT ASSEMBLY VAR $ VAR $85 TUNGSTEN VAR $ VAR $75 (Dual) 580 Nude Ion Gauge Tube - Bayard-Alpert Type Heated Grid Degas, BIFILAR GRID CONNECTION FILAMENT PART NUMBER PRICE 2.75 OD Conflat Flange VARIAN EQUIVALENT FILAMENT REPLACEMENT ASSEMBLY IRIDIUM VAR-L $320 L VAR-L $65 NW40 IRIDIUM VAR-L $310 L VAR-L $65 HOT FILAMENT TRIODE TUBE GLASS FILAMENT(S) PART NUMBER PRICE NONEX TUNGSTEN VAR $139 PYREX IRIDIUM VAR $148 FOR MORE VARIAN SPARES CAGE GRID BIFILAR GRID NUDE ION GAUGE SPARES 14

15 STANDARD RANGE ION GAUGE TUBES - UNCOATED CONNECTION FILAMENT GLASS PART NUMBER PRICE VARIAN EQUIVALENT 3/4" Tungsten Nonex (Schott) $117 K Tubulation Arm (Dual) Kovar $130 K Series 1" Tungsten Nonex (Schott) $117 K Tubulation Arm (Dual) Kovar $130 K /4" Nonex (Schott) $124 K Iridium Tubulation Arm Kovar $139 K " Nonex (Schott) $124 K Iridium Tubulation Arm Kovar $ Series K NW25 Kovar NW25 $180 K NW40 Iridium Kovar NW40 $180 K " CF Kovar $180 K STANDARD RANGE ION GAUGE TUBES - PLATINUM COATED CONNECTION FILAMENT GLASS PART NUMBER PRICE VARIAN EQUIVALENT 3/4" Nonex (Schott) PC-SR $165 K Iridium Tubulation Arm Kovar PC-SR $184 K " Nonex (Schott) PC-SR $165 K Iridium Tubulation Arm Kovar PC-SR $ Series K NW25 Kovar PC-SR-NW25 $204 K NW40 Iridium Kovar PC-SR-NW40 $204 K " CF Kovar PC-SR-275 $211 K BROAD RANGE ION GAUGE TUBES - PLATINUM COATED CONNECTION FILAMENT GLASS PART NUMBER PRICE VARIAN EQUIVALENT 1" Nonex (Schott) PC-BR $172 K Iridium Tubulation Arm Kovar PC-BR $195 K NW25 Kovar PC-BR-NW25 $218 K NW40 Iridium Kovar PC-BR-NW40 $ Series K " CF Kovar PC-BR-275 $219 K " CF Iridium (Dual) Kovar PC-BR-275x2 $243 K STANDARD RANGE SPECIFICATIONS Operating Pressure: 2x10-10 torr to 1x10-3 torr X-ray Limit: 2x10-10 torr Sensitivity: 10 torr -1 BROAD RANGE SPECIFICATIONS Operating Pressure: AIR: 4x10-10 torr to 5x10-2 torr Argon: 4x10-10 torr to 1x10-1 torr X-ray Limit: 4x10-10 torr Sensitivity: 6 torr -1 GLASS SPECIFICATIONS Nonex tubulation fits most quick couplings Kovar metal tubulation with a graded seal for stronger tubulation PLATINUM COATING Shields the gauge elements from electrostatic charges at low pressures and drains off the static charges that can build up at high pressures. UNCOATED ION GAUGE TUBE PLATINUM ION GAUGE TUBE QUICK COUPLINGS PAGE 68 GET MORE FROM YOUR ION GAUGE USE CONFLAT FLANGES AND COPPER GASKETS! Are you operating at a pressure below 10-8 torr? O-ring sealed compression ports limit the system pressure because of leakage and permeation. 133-CG $14/PACK OF CG $16/PACK OF 10 15

16 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z LDS VACUUM PRODUCTS CALIBRATION Valid To: August 31, 2011 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following calibrations 1 : I. Mechanical Quantities (Leak Standards and Vacuum Gages) Parameter Range 3 CMC 2, 4 (+) Comments Leak Rate Helium Gas Leak Standards ( to ) scm 3 /s 2.7% of reading Other Gas Leak Standard Gases ( to ) scm 3 /s 20% of reading LDS gas leak comparison system High Vacuum & Ultra High Vacuum Gauges Ion and Cold Cathode Gauges ( to ) torr 2.2% of reading LDS vacuum gauge comparison system Rough Vacuum Gauges Thermocouple, Pirani Gauges, Convection Gauges, Capacitance Manometers 1 This laboratory offers commercial calibration service. (1000 to ) torr 0.55% of reading LDS vacuum gauge comparison system ( to ) torr 0.85% of reading using capacitance manometers 2 Calibration and Measurement Capability (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. Calibration and Measurement Capabilities represent expanded uncertainties expressed at approximately the 95% level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 The unit scm3/s, standard cubic centimeters per second, is equivalent to one atmospheric cubic centimeter per second. 4 In the statement of CMC, percentages are to be read as percent of reading, unless noted otherwise. VISIT LDSVACUUM.COM TO VIEW OUR SCOPE IN ITS ENTIRETY 16

17 GAS LEAK CALIBRATION ALL BRANDS AND GASES Helium Calibration: $ Hour Service Available NIST Traceable REPAIR SERVICE ALL BRANDS Price: $295 Includes refill, calibration and Cert LDS PRIMARY STANDARDS ARE SENT DIRECTLY TO NIST NO 3RD PARTY CALIBRATION CALIBRATION LABORATORY VACUUM GAUGE CALIBRATION $279 GAUGE CALIBRATION 6 CALIBRATION POINTS (STANDARD) ADDITIONAL POINTS CAN BE PURCHASED OTHER AVAILABLE SERVICES: EXPRESS SERVICE (3-DAYS) REPAIR OR REPLACEMENT GAUGES ALL BRANDS BARATRON CAPACITANCE MANOMETER COLD CATHODE CONVECTRON INVERTED MAGNETRON ION PENNING PIRANI THERMOCOUPLE THERMOVAC 17

18 DIFFUSION SERIES CALIBRATED GAS LEAKS NIST Traceable Lifetime Warranty Specific Leak Rates Available All Styles and Fittings FREE Storage Case For ALL BRANDS Of Leak Detectors and RGAs CALIBRATION LABORATORY DIFFUSION SERIES CALIBRATED GAS LEAKS A diffusion type leak is greatly affected by temperature. Most diffusion leaks change 3.6% per degree Celsius. Diffusion leaks will not clog cc/sec (HELIUM) PORT VALVE TYPE VARIAN VIC $ /8" X External F NW25 $690 NW25 X External F X 10-9 cc/sec (HELIUM) PORT VALVE TYPE VARIAN VIC $ /8" X External F NW25 $640 NW25 X External F X 10-8 cc/sec (HELIUM) PORT VALVE TYPE VARIAN VIC $ /8" X External F NW25 $480 NW25 X External F X K $455 NPT Internal K X VIC $435 CPC Internal X DIFFUSION STYLE 1-1/8 Port (Standard) 10-7 cc/sec (HELIUM) PORT VALVE TYPE VARIAN ALCATEL V $ /8" X External F X V-NW25 $505 NW25 X External F X K $455 NPT Internal K X ALC $530 NW16 Internal X ALC $530 NW16 Internal X VARIAN STYLE ALC $455 NW16 Internal X ALC $640 NW25 X External X OPTIONS and PORT SIZES ALL LDS GAS LEAKS K K Calibration Certification FREE Carrying Case FREE PORT- STANDARD FREE PORT- NW16, NW25, NW40 FREE PORT OD Conflat $99 PORT OD Conflat $99 Specific Leak Rate $100 STANDARD PORT is used for ALL new leaks unless another port is specified at time of order. ALCATEL STYLE TEST PORT ADAPTORS PAGE 39 Part mimic leaks (PML) are the go/no go gauges used to test and calibrate production leak testing equipment. PML's are designed and built with the exact dimensions of your part and have an integrated leak element set to your specifications. Contact the LDS Calibration Department for more information. 18

19 CAPILLARY SERIES CALIBRATED GAS LEAKS For ALL BRANDS Of Leak Detectors and RGAs CAPILLARY SERIES CALIBRATED GAS LEAKS Capillary type leaks change very little with temperature and are recommended for applications where environmental temperature can not be controlled. In time, these leaks can clog cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $655 X 300 External 1-1/8" X $ External 1/2" TUBE OM S $ External SNIFFER TUBE X 10-6 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $655 X 300 External 1-1/8" X $ External 1/2" TUBE OM S $ External SNIFFER TUBE X 10-5 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $655 X 300 External 1-1/8" X CAPILLARY STYLE $ External 1/2" TUBE OM-5 1-1/8 Port S $ External SNIFFER TUBE X 10-4 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $655 X 300 External 1-1/8" X $ External 1/2" TUBE OM S $ External SNIFFER TUBE X 10-3 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $1,025 X 500 External 1-1/8" X $1,025 X 500 External 1/2" TUBE OM S $880 X 300 External SNIFFER TUBE X 10-2 cc/sec (HELIUM) SHUT-OFF VALVE CYLINDER TYPE PORT VIC $1,025 X 500 External 1-1/8" X CAPILLARY STYLE $1,025 X 500 External 1/2" TUBE SNIFFER ADJUSTABLE CALIBRATED GAS LEAKS 10-6 through 10-7 (HELIUM) VARIAN DR $765 X 10-5 through 10-6 (HELIUM) VARIAN DR $765 F through 10-6 (HELIUM) VARIAN NW25 $765 F through 10-5 (HELIUM) VARIAN DR $765 X 10-3 through 10-4 (HELIUM) VARIAN DR $765 X 10-2 through 10-3 (HELIUM) VARIAN DR $765 X ADJUSTABLE GAS LEAKS STANDARD FEATURES 150 cc cylinder Quality Gauge Fits 1-1/8" OD or 1/4" NPT 3-Point calibration (low/mid/ high) MANUFACTURED BY LDS FOR OVER 38 YEARS 19

20 NW FLANGES DIMENSIONS ALSO KNOWN AS QF OR KF ISO100 ISO80 VACUUM ESSENTIALS - COMBINING TO SAVE MORE! ISO63 NW50 NW40 NW25 NW16 LOOKING FOR NW10 FLANGES? Turn your NW10 into an NW16 by using an Adaptive Centering Ring - SEE PAGE 23 20

21 CLAMPS - BULKHEAD PART NUMBER QUAN SALE BOLTS A B C NW BC EACH $13 NW16-BC-PK10 10 PACK $ NW BC EACH $15 NW25-BC-PK10 10 PACK $ NW BC EACH $17 NW40-BC-PK10 10 PACK $ NW BC EACH $ NW50-BC-PK10 10 PACK $190 Stainless bolts and washers included (10-32x5/8) CLAMPS - CNC MACHINED ALUMINUM PART NUMBER QUAN SALE A B Max PSI TUBE SIZE NW C EACH $11 NW16-C-PK10 10 PACK $100 NW C EACH $13 NW25-C-PK10 10 PACK $120 NW C EACH $14 NW40-C-PK10 10 PACK $130 NW C EACH $18 NW50-C-PK10 10 PACK $ & Stainless pins and stud, machined from solid bar CLAMPS STAINLESS STEEL PART NUMBER QUAN LIST SALE A B TUBE SIZE NW CSP EACH $43 $22 NW16-CSP-PK10 10 PACK $430 $200 NW CSP EACH $53 $27 NW25-CSP-PK10 10 PACK $530 $250 NW CSP EACH $63 $32 NW40-CSP-PK10 10 PACK $630 $300 NW CSP EACH $73 $ & NW50-CSP-PK10 10 PACK $730 $ Forged Stainless WING NUT ALUMINUM CLAMPS - ALL SIZES $4.95 PART NUMBER QUAN SALE A B C TUBE SIZE NW CW EACH $4.95 NW16-CW-PK10 10 PACK $ & 0.75 NOTE: NW16 CLAMPS CAN BE USED ON NW10 FLANGES NW CW EACH $4.95 NW25-CW-PK10 10 PACK $ NW CW EACH $4.95 NW40-CW-PK10 10 PACK $ NW CW EACH $ NW50-CW-PK10 10 PACK $45 Low cost aluminum die cast clamp VACUUM HARDWARE PRICED RIGHT! NW10-CW-SRV $9 Aluminum Wing Clamp & SS/Viton Ring NW16-CW-SRV $9 Aluminum Wing Clamp & SS/Viton Ring NW25-CW-SRV $10 Aluminum Wing Clamp & SS/Viton Ring NW40-CW-SRV $11 Aluminum Wing Clamp & SS/Viton Ring NW50-CW-SRV $12 Aluminum Wing Clamp & SS/Viton Ring ISO SERIES CLAMPS - PAGE 43 21

22 CENTERING RINGS Aluminum or Stainless Buna-N: 100 o C Max Silicone: 200 o C Max Viton: 200 o C Max AR & SR SERIES No O-Ring SCREEN MESH 72 Holes Per Inch Viton is a registered trademark of DuPont Dow Elastomers CENTERING RINGS - ALL TYPES FLNG Material A B PART NUMBER SALE O-Ring REPLACEMENT O-RINGS NW10 NW16 NW25 NW40 NW50 NW SR-V $4 Viton NW OV $2 Stainless NW SR-S $4 Silicone NW OS $1 NW SR-B $4 Buna-N NW OB $1 X NW SR $4 NW AR-V $5 Viton NW OV $2 Aluminum NW AR-S $5 Silicone NW OS $1 NW AR-B $3 Buna-N NW OB $1 X NW AR $2 NW SR-V $4 Viton NW OV $2 Stainless NW SR-S $4 Silicone NW OS $1 NW SR-B $4 Buna-N NW OB $1 X NW SR $3 NW AR-V $5 Viton NW OV $2 Aluminum NW AR-S $5 Silicone NW OS $1 NW AR-B $3 Buna-N NW OB $1 X NW AR $2 NW SRV-SM $17 Viton NW OV $2 Mesh Screen Ring NW SRS-SM $17 Silicone NW OS $1 NW SRB-SM $17 Buna-N NW OB $1 NW SR-V $5 Viton NW OV $3 Stainless NW SR-S $5 Silicone NW OS $2 NW SR-B $5 Buna-N NW OB $1 X NW SR $4 NW AR-V $5 Viton NW OV $3 Aluminum NW AR-S $6 Silicone NW OS $2 NW AR-B $4 Buna-N NW OB $1 X NW AR $3 NW SRV-SM $19 Viton NW OV $3 Mesh Screen Ring NW SRS-SM $19 Silicone NW OS $2 NW SRB-SM $19 Buna-N NW OB $1 NW SR-V $6 Viton NW OV $3 Stainless NW SR-S $6 Silicone NW OS $2 NW SR-B $6 Buna-N NW OB $1 X NW SR $5 NW AR-V $7 Viton NW OV $3 Aluminum NW AR-S $8 Silicone NW OS $2 NW AR-B $5 Buna-N NW OB $1 X NW AR $4 NW SRV-SM $23 Viton NW OV $3 Mesh Screen Ring NW SRS-SM $23 Silicone NW OS $2 NW SRB-SM $23 Buna-N NW OB $1 NW SR-V $7 Viton NW OV $4 Stainless NW SR-S $7 Silicone NW OS $2 NW SR-B $7 Buna-N NW OB $1 X NW SR $6 NW AR-V $9 Viton NW OV $4 Aluminum NW AR-S $10 Silicone NW OS $2 NW AR-B $6 Buna-N NW OB $1 X NW AR $5 Mesh Screen Ring NW SRV-SM $25 Viton NW OV $4 NW SRS-SM $25 Silicone NW OS $2 NW SRB-SM $25 Buna-N NW OB $1 22

23 ADAPTIVE CENTERING RING WITH O-RING FLANGE Material PART NUMBER O-Ring A B C EACH NW10 TO NW16 Stainless Aluminum NW10-16-ASR-V NW10-16-ASR-S NW10-16-ASR-B NW10-16-AAR-V NW10-16-AAR-S NW10-16-AAR-B Viton Silicone Buna-N Viton Silicone Buna-N $ $5 Use NW16 Series Clamps When Converting From NW10 NW20 TO NW25 Stainless Aluminum NW20-25-ASR-V NW20-25-ASR-S NW20-25-ASR-B NW20-25-AAR-V NW20-25-AAR-S NW20-25-AAR-B Viton Silicone Buna-N Viton Silicone Buna-N $ $7 Use NW25 Series Clamps When Converting From NW20 NW32 TO NW40 Stainless Aluminum NW32-40-ASR-V NW32-40-ASR-S NW32-40-ASR-B NW32-40-AAR-V NW32-40-AAR-S NW32-40-AAR-B Viton Silicone Buna-N Viton Silicone Buna-N $ $11 Viton is a registered trademark of DuPont Dow Elastomers Use NW40 Series Clamps When Converting From NW32 O-RING KITS - BUNA-N, SILICONE AND VITON KIT CONTENTS (5) NW10 (5) NW16 (5) NW25 (5) NW40 (5) NW50 PART NUMBER O-Ring Maximum Temperature EACH NW Buna-N 100 o C $15 V NW Viton 200 o C $50 S NW Silicone 200 o C $25 Silicone O-Rings Are Used In Chemical Applications OVER PRESSURE RINGS PART NUMBER MAX PSIG A B C SALE NW OPR* $5 NW OPR* $5 NW OPR* $5 NW OPR $5 Provides support for o-ring when operating above ATM *Not required when using NW16, NW25 or NW40 CNC Clamps OVER PRESSURE RING & CENTERING RING ASSEMBLY PART NUMBER O-Ring A B C SALE NW SRV-OPR Trapped Ring Viton $10 NW SRV-OPR Trapped Ring Viton $11 NW SRV-OPR Trapped Ring Viton $12 NW SRV-OPR Trapped Ring Viton $13 OVER PRESSURE RING ASSEMBLY WITH OPR AND CENTERING RING ALUMINUM 23

24 ISO WELD FLANGES - PAGE 44 NW BLANK FLANGE - ALUMINUM & STAINLESS FLNG PART NUMBER Material A SALE VACUUM ESSENTIALS Use To Close Off Unused Ports NW10 NW AB Aluminum $4 NW10-AB-VE $ NW SB 304 S/S $5 NW10-SB-VE $12 NW16 NW AB Aluminum $4 NW16-AB-VE $ NW SB 304 S/S $5 NW16-SB-VE $12 NW25 NW AB Aluminum $5 NW25-AB-VE $ NW SB 304 S/S $5 NW25-SB-VE $14 NW40 NW AB Aluminum $8 NW40-AB-VE $ NW SB 304 S/S $8 NW40-SB-VE $17 NW50 NW AB Aluminum $8 NW50-AB-VE $ NW SB 304 S/S $8 NW50-SB-VE $18 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) UNBORED STUB FLANGE - ALUMINUM & STAINLESS FLNG PART NUMBER Material A B SALE VACUUM ESSENTIALS Modify To Your Specs NW16 NW UA Aluminum $7 NW16-UA-VE $ NW US 304 S/S $8 NW16-US-VE $16 NW25 NW UA Aluminum $8 NW25-UA-VE $ NW US 304 S/S $10 NW25-US-VE $19 NW40 NW UA Aluminum $10 NW40-UA-VE $ NW US 304 S/S $13 NW40-US-VE $23 NW50 NW UA Aluminum $13 NW50-UA-VE $ NW US 304 S/S $17 NW50-US-VE $28 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) WELD RING FLANGES STAINLESS STEEL TUBE SIZE PART NUMBER A B C Offset SALE VACUUM ESSENTIALS 0.75 NW RF $6 NW16-RF-VE $ NW RF $7 NW25-RF-VE $ NW RF $9 NW40-RF-VE $ NW RF $13 NW50-RF-VE $24 INTERNAL WELD, ACCEPTS STANDARD TUBING Wing Clamp (CW) & SS/Viton Centering Ring (SRV) VACUUM ESSENTIALS COMBINING PRODUCTS TO SAVE YOU EVEN MORE! 24

25 CONFLAT FLANGE WELD FITTINGS - PAGES BORED WELD FLANGE STAINLESS STEEL FLANGE NW10 NW16 NW25 NW40 NW50 PART NUMBER BORE SIZE A B C SALE NW10-B $8 NW10-B $8 NW10-B $8 NW16-B $6 NW16-B $ NW16-B $6 NW16-B $6 NW25-B $7 NW25-B $7 NW25-B $7 NW25-B $7 NW25-B $7 NW40-B $9 NW40-B $9 NW40-B $ NW40-B $9 NW40-B $9 NW40-B $9 NW50-B $14 NW50-B $14 NW50-B $14 NW50-B $14 NW50-B $14 NW50-B $14 NW50-B $14 Traditional inch tube outer diameters SHORT WELD STUB FLANGE PART TUBE MATERIAL A B C SALE NUMBER SIZE NW AS Aluminum $ NW SS 304 S/S $6.50 NW AS Aluminum $ NW SS 304 S/S $6.50 NW AS Aluminum $ NW SS 304 S/S $7.50 NW AS Aluminum $ NW SS 304 S/S $9.50 NW AS Aluminum $ NW SS 304 S/S $13.00 Butt weld flange, traditional inch tube diameters SHORT WELD FLANGE STAINLESS STEEL FIGURE I TUBE SIZE A B OFFSET C NW SF 0.50x $7 NW SF 0.75x $7 D SALE FIGURE II TUBE SIZE A B OFFSET C D SALE NW SF $7 NW SF $9 NW SF $14 Internal weld flange, accepts traditional tubing USE WELD FITTINGS TO MAKE YOUR OWN COMPONENTS - PG

26 ISO ELBOWS - SEE PAGE o ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW E $50 $37 NW16-E45-VE $74 $50 NW E $55 $41 NW25-E45-VE $87 $57 NW E $84 $62 NW40-E45-VE $126 $79 NW E $90 $69 NW50-E45-VE $148 $89 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 90 o ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW E $45 $33 NW16-E90-VE $69 $46 NW E $50 $36 NW25-E90-VE $82 $49 NW E $70 $54 NW40-E90-VE $112 $70 NW E $89 $64 NW50-E90-VE $147 $84 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 90 o MITER ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW E90M 1.57 $53 $33 NW16-E90M-VE $77 $46 NW E90M 1.97 $54 $37 NW25-E90M-VE $86 $49 NW E90M 2.56 $72 $50 NW40-E90M-VE $114 $66 NW E90M 3.17 $93 $62 NW50-E90M-VE $151 $83 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 90 o LONG RADIUS ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW E90-LR 2.70 $73 $49 NW16-E90-LR-VE $97 $65 NW E90-LR 3.64 $78 $54 NW25-E90-LR-VE $110 $72 NW E90-LR 5.12 $99 $74 NW40-E90-LR-VE $141 $94 NW E90-LR 5.52 $115 $89 NW50-E90-LR-VE $173 $111 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 180 o ELBOWS STAINLESS STEEL PART NUMBER A B LIST SALE VACUUM ESSENTIALS LIST SALE NW E $78 $39 NW16-E180-VE $102 $55 NW E $83 $45 NW25-E180-VE $115 $63 NW E $105 $60 NW40-E180-VE $147 $80 NW E $130 $77 NW50-E180-VE $188 $99 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) 90 o REDUCING ELBOWS STAINLESS STEEL FLNG FLNG PART NUMBER SALE VACUUM ESSENTIALS LIST SALE 1 2 NW25x16-E90 NW25 $43 NW25x16-E90-VE $71 $60 NW40x16-E90 NW16 NW40 $60 NW40x16-E90-VE $93 $78 NW50x16-E90 NW50 $75 NW50x16-E90-VE $116 $94 NW40x25-E90 NW40 $63 NW40x25-E90-VE $100 $82 NW25 NW50x25-E90 NW50 $78 NW50x25-E90-VE $123 $98 NW50x40-E90 NW40 NW50 $81 NW50x40-E90-VE $139 $102 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) CONFLAT FLANGED ELBOWS - SEE PAGE 59 26

27 NW TEES STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW T 1.57 $73 $52 NW16-T-VE $109 $75 NW T 2.01 $83 $66 NW25-T-VE $131 $89 NW T 2.40 $96 $73 NW40-T-VE $159 $98 NW T 3.15 $132 $94 NW50-T-VE $219 $127 3-Wing Clamps (CW) & 3-SS/Viton Centering Rings (SRV) NW REDUCING TEES STAINLESS STEEL PART NUMBER A B LIST SALE VACUUM ESSENTIALS LIST SALE NW25x16-T $75 $51 NW25x16-T-VE $119 $75 NW40x16-T $88 $56 NW40x16-T-VE $142 $81 NW40x25-T $115 $67 NW40x25-T-VE $173 $94 NW50x16-T $110 $71 NW50x16-T-VE $180 $98 NW50x25-T $120 $78 NW50x25-T-VE $194 $106 NW50x40-T $135 $83 NW50x40-T-VE $214 $111 3-Wing Clamps (CW) & 3-SS/Viton Centering Rings (SRV) ISO TO NW REDUCING TEES STAINLESS STEEL FLANGE TUBE FLANGE TUBE PART NUMBER A B PRICE 1&2 OD 3 OD ISO63xNW40-T NW $170 ISO ISO63xNW50-T NW $178 ISO80xNW40-T NW $198 ISO ISO80xNW50-T NW $208 ISO100xNW40-T NW $216 ISO ISO100xNW50-T NW $229 CONTACT LDS FOR OTHER COMBINATIONS CF TO NW REDUCING TEES STAINLESS STEEL ROTATABLE CONFLATS FLANGE TUBE FLANGE TUBE PART NUMBER A B PRICE 1&2 OD 3 OD 275xNW16-RWT NW $ CF xNW25-RWT NW $ xNW40-RWT NW $ CF xNW50-RWT NW $ xNW40-RWT NW $ CF xNW50-RWT NW $335 CONTACT LDS FOR OTHER COMBINATIONS LDS IS YOUR SURPLUS GAUGE HEADQUARTERS SYSTEM CALIBRATION SERVICE ALSO AVAILABLE CALIBRATION LABORATORY MORE SURPLUS ITEMS ADDED DAILY! SURPLUS ITEMS ARE WHILE SUPPLIES LAST 27

28 ISO CROSSES - SEE PAGE 47 4-WAY CROSS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW X 1.59 $105 $75 NW16-X-VE $153 $102 NW X 2.01 $125 $85 NW25-X-VE $189 $116 NW X 2.58 $150 $110 NW40-X-VE $234 $144 NW X 3.16 $200 $130 NW50-X-VE $316 $168 4-Wing Clamps (CW) & 4-SS/Viton Centering Rings (SRV) 5-WAY CROSS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW X 1.50 $225 $140 NW16-5X-VE $235 $164 NW X 2.05 $250 $156 NW25-5X-VE $275 $186 NW X 2.42 $290 $176 NW40-5X-VE $325 $212 NW X 3.17 $425 $232 NW50-5X-VE $435 $269 5-Wing Clamps (CW) & 5-SS/Viton Centering Rings (SRV) 6-WAY CROSS STAINLESS STEEL PART NUMBER A LIST SALE VACUUM ESSENTIALS LIST SALE NW X 1.57 $245 $156 NW16-6X-VE $267 $186 NW X 2.05 $275 $176 NW25-6X-VE $316 $218 NW X 2.42 $315 $212 NW40-6X-VE $391 $249 NW X 3.17 $500 $332 NW50-6X-VE $589 $368 6-Wing Clamps (CW) & 6-SS/Viton Centering Rings (SRV) REDUCING CROSSES STAINLESS STEEL PART NUMBER A B LIST SALE VACUUM ESSENTIALS LIST SALE NW25x16-X $125 $70 NW25x16-X-VE $181 $104 NW40x16-X $145 $91 NW40x16-X-VE $211 $124 NW40x25-X $155 $98 NW40x25-X-VE $229 $129 NW50x16-X $195 $123 NW50x16-X-VE $277 $158 NW50x25-X $200 $126 NW50x25-X-VE $290 $161 NW50x40-X $225 $130 NW50x40-X-VE $305 $164 4-Wing Clamps (CW) & 4-SS/Viton Centering Rings (SRV) CONFLAT FLANGED CROSSES - SEE PAGE 60 TESCOM PRESSURE REGULATOR Inlet Pressure: 500 PSIG Outlet Pressure: PSIG Gauge ports - 3/8" NPT SURPLUS# 051 List: $576 - Sale: $99 Veeco Style Filaments - TF91 ( ) Box of 5 filaments P/N: BLK Everyday Price: $160 Helium Spray Probe w/5 Tips 50 Coiled Length 40 useable length 1/8 Swivel Male NPT Connection P/N: LDS DR $99 28

29 ISO TO NW REDUCING CROSS STAINLESS STEEL PART NUMBER A B FLANGE 1&2 TUBE OD FLANGE 3 TUBE OD PRICE ISO63xNW40-X NW $189 ISO ISO63xNW50-X NW $206 ISO80xNW40-X NW $246 ISO ISO80xNW50-X NW $272 ISO100xNW40-X NW $297 ISO ISO100xNW50-X NW $306 CONTACT LDS FOR OTHER COMBINATIONS CF TO NW REDUCING CROSS STAINLESS STEEL CF FLANGES ARE ROTATABLE PART NUMBER A B FLANGE 1&2 TUBE OD FLANGE 3 TUBE OD PRICE 275xNW16-RWX NW $ CF xNW25-RWX NW $ xNW40-RWX NW $ CF xNW50-RWX NW $ xNW40-RWX NW $ CF xNW50-RWX NW $456 CONTACT LDS FOR OTHER COMBINATIONS VIEWPORTS - KODIAL GLASS PART NUMBER A B C D E Viewing Area PRICE NW ZVP $140 NW ZVP $140 NW ZVP $145 NW ZVP $170 Optical discs are Kodial glass (alkali borosilicate 7056) Bakeout to 200 F due to elastomeric fluorocarbon o-ring seal (heating rate should not exceed 2-3 per minute) PLASTIC COVERS - PROTECT YOUR FLANGES! PART NUMBER DESCRIPTION PRICE NW16-PC Plastic Cap -Fits NW10 & NW16 Flanges $.50 NW25-PC Plastic Cap -Fits NW25 Flanges $.50 NW40-PC Plastic Cap -Fits NW40 Flanges $.50 NW50-PC Plastic Cap -Fits NW50 Flanges $.50 Protect your flanges from scratches and nicks with PROTECTIVE PLASTIC CAPS LARGE RENTAL FLEET - WE RENT EVERYTHING! MAKE YOUR OWN CROSSES - USE WELD BODIES PAGE 67 LDS RENTS DRY LEAK DETECTORS TOO - SEE PAGE 76 29

30 AP12 & SP12 Fit Thermocouple Gauge Tubes Use with teflon tape or OC Series Thread Sealants Tapped to Female NPT Use with teflon tape or OC Series Thread Sealants NW FLANGE ADAPTOR TO FEMALE NPT FLNG NW16 NW25 NW40 NW50 FEMALE NPT A B MATERIAL PART NUMBER SALE VACUUM ESSENTIALS 1/ Aluminum NW AP12 $11 NW16-AP12-VE $19 Stainless NW SP12 $15 NW16-SP12-VE $23 1/ Aluminum NW AP25 $11 NW16-AP25-VE $19 Stainless NW SP25 $15 NW16-SP25-VE $23 1/ Aluminum NW AP12 $12 NW25-AP12-VE $21 Stainless NW SP12 $17 NW25-SP12-VE $26 1/ Aluminum NW AP25 $12 NW25-AP25-VE $21 Stainless NW SP25 $17 NW25-SP25-VE $26 1/ Stainless NW SP50 $23 NW25-SP50-VE $32 1/ Aluminum NW AP12 $13 NW40-AP12-VE $23 Stainless NW SP12 $23 NW40-SP12-VE $33 1/ Aluminum NW AP25 $13 NW40-AP25-VE $23 Stainless NW SP25 $23 NW40-SP25-VE $33 1/ Stainless NW SP50 $29 NW40-SP50-VE $39 3/ Stainless NW SP75 $30 NW40-SP75-VE $40 1/ Aluminum NW AP12 $17 NW50-AP12-VE $28 Stainless NW SP12 $30 NW50-SP12-VE $41 Aluminum NW AP25 $17 NW50-AP25-VE $28 1/ Stainless NW SP25 $30 NW50-SP25-VE $41 1/ Stainless NW SP50 $34 NW50-SP50-VE $45 3/ Stainless NW SP75 $35 NW50-SP75-VE $46 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) ADAPTIVE TEE TO FEMALE NPT FLNG FEMALE A B MATERIAL PART NUMBER SALE VACUUM ESSENTIALS NW16 1/8 Aluminum NW16x1/8NPT-AT $25 NW16x1/8-AT-VE $ NPT Stainless NW16x1/8NPT-ST $33 NW16x1/8-ST-VE $49 1/4 Aluminum NW16x1/4NPT-AT $26 NW16x1/4-AT-VE $ NPT Stainless NW16x1/4NPT-ST $34 NW16x1/4-ST-VE $50 NW25 1/8 Aluminum NW25x1/8NPT-AT $27 NW25x1/8-AT-VE $ NPT Stainless NW25x1/8NPT-ST $37 NW25x1/8-ST-VE $55 1/4 Aluminum NW25x1/4NPT-AT $28 NW25x1/4-AT-VE $ NPT Stainless NW25x1/4NPT-ST $38 NW25x1/4-ST-VE $56 NW40 1/8 Aluminum NW40x1/8NPT-AT $29 NW40x1/8-AT-VE $ NPT Stainless NW40x1/8NPT-ST $48 NW40x1/8-ST-VE $68 1/4 Aluminum NW40x1/4NPT-AT $29 NW40x1/4-AT-VE $ NPT Stainless NW40x1/4NPT-ST $48 NW40x1/4-ST-VE $68 NW50 1/8 Aluminum NW50x1/8NPT-AT $37 NW50x1/8-AT-VE $ NPT Stainless NW50x1/8NPT-ST $59 NW50x1/8-ST-VE $81 1/4 Aluminum NW50x1/4NPT-AT $38 NW50x1/4-AT-VE $ NPT Stainless NW50x1/4NPT-ST $59 NW50x1/4-ST-VE $81 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) OC Series Thread Sealants ON NPT ADAPTORS INSTEAD OF TEFLON TAPE Available On Page 4 30

31 NW to Male Pipe Adaptor Aluminum Made from one piece Low Cost Alternative 304 S/S Full hex Other Combinations Available NW TO MALE PIPE ADAPTOR - ALUMINUM FLNG PART NUMBER MALE HEIGHT THRU WRENCH EACH NPT FLATS VACUUM ESSENTIALS NW16 NW16x12NPT-A 1/ $23 NW16x12NPTA-VE $ NW16x25NPT-A 1/ $23 NW16x25NPTA-VE $31 NW25x12NPT-A 1/ $28 NW25x12NPTA-VE $ NW25x25NPT-A 1/ $28 NW25x25NPTA-VE $37 NW25 NW25x50NPT-A 1/ $29 NW25x50NPTA-VE $38 NW25x75NPT-A 3/ $29 NW25x75NPTA-VE $ NW25x100NPT-A $29 NW25x100NPTA-VE $38 NW40x12NPT-A 1/ $33 NW40x12NPTA-VE $ NW40x25NPT-A 1/ $33 NW40x25NPTA-VE $43 NW40x50NPT-A 1/ $33 NW40x50NPTA-VE $43 NW40 NW40x75NPT-A 3/ $34 NW40x75NPTA-VE $ NW40x100NPT-A $34 NW40x100NPTA-VE $44 NW40x125NPT-A 1-1/ $48 NW40x125NPTA-VE $ NW40x150NPT-A 1-1/ $48 NW40x150NPTA-VE $58 NW50x12NPT-A 1/ $43 NW50x12NPTA-VE $ NW50x25NPT-A 1/ $43 NW50x25NPTA-VE $54 NW50x50NPT-A 1/ $43 NW50x50NPTA-VE $54 NW50x75NPT-A 3/ $43 NW50x75NPTA-VE $ NW50 NW50x100NPT-A $43 NW50x100NPTA-VE $54 NW50x125NPT-A 1-1/ $58 NW50x125NPTA-VE $69 NW50x150NPT-A 1-1/ $58 NW50x150NPTA-VE $69 NW50x200NPT-A $58 NW50x200NPTA-VE $69 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) NW TO MALE PIPE ADAPTOR SS FLNG PART NUMBER MALE NPT A LIST SALE VACUUM ESSENTIALS NW16x12NPT 1/ $48 $36 NW16x12NPT-VE $44 NW16x25NPT 1/ $48 $38 NW16x25NPT-VE $46 NW16 NW16x38NPT 3/ $61 $50 NW16x38NPT-VE $58 NW16x50NPT 1/ $70 $58 NW16x50NPT-VE $66 NW16x75NPT 3/ $72 $63 NW16x75NPT-VE $71 NW25x12NPT 1/ $49 $37 NW25x12NPT-VE $46 NW25x25NPT 1/ $54 $40 NW25x25NPT-VE $49 NW25 NW25x38NPT 3/ $61 $43 NW25x38NPT-VE $52 NW25x50NPT 1/ $65 $44 NW25x50NPT-VE $53 NW25x75NPT 3/ $81 $58 NW25x75NPT-VE $67 NW25x100NPT $105 $72 NW25x100NPT-VE $81 NW40x12NPT 1/ $54 $39 NW40x12NPT-VE $49 NW40x25NPT 1/ $55 $42 NW40x25NPT-VE $52 NW40x38NPT 3/ $63 $44 NW40x38NPT-VE $54 NW40 NW40x50NPT 1/ $66 $47 NW40x50NPT-VE $57 NW40x75NPT 3/ $85 $72 NW40x75NPT-VE $82 NW40x100NPT $105 $77 NW40x100NPT-VE $87 NW40x125NPT 1-1/ $120 $81 NW40x125NPT-VE $91 NW40x150NPT 1-1/ $136 $89 NW40x150NPT-VE $99 NW50x12NPT 1/ $60 $43 NW50x12NPT-VE $54 NW50x25NPT 1/ $60 $46 NW50x25NPT-VE $57 NW50x38NPT 3/ $67 $48 NW50x38NPT-VE $59 NW50x50NPT 1/ $69 $51 NW50x50NPT-VE $62 NW50 NW50x75NPT 3/ $94 $64 NW50x75NPT-VE $75 NW50x100NPT $110 $78 NW50x100NPT-VE $89 NW50x125NPT 1-1/ $123 $85 NW50x125NPT-VE $96 NW50x150NPT 1-1/ $156 $99 NW50x150NPT-VE $110 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) 31

32 NW TO FEMALE OR MALE VCR FLANGE TUBE SIZE A FEMALE VCR SALE MALE VCR SALE 1/8" 0.85 NW16x12VCR $44 NW16x12VCR-M $44 NW16 1/4" 1.36 NW16x25VCR $47 NW16x25VCR-M $47 3/8" 1.88 NW16x38VCR $55 NW16x38VCR-M $55 1/2" 1.88 NW16x50VCR $67 NW16x50VCR-M $67 1/8" 0.85 NW25x12VCR $49 NW25x12VCR-M $49 1/4" 1.36 NW25x25VCR $52 NW25x25VCR-M $52 NW25 3/8" 1.55 NW25X38VCR $59 NW25X38VCR-M $59 1/2" 1.55 NW25x50VCR $66 NW25x50VCR-M $66 3/4" 2.15 NW25x75VCR $120 NW25x75VCR-M $110 1" 2.27 NW25x100VCR $140 NW25x100VCR-M $130 NW to Female VCR 1/8" 0.85 NW40x12VCR $55 NW40x12VCR-M $55 1/4" 1.36 NW40x25VCR $56 NW40x25VCR-M $56 NW40 3/8" 1.55 NW40x38VCR $64 NW40x38VCR-M $64 1/2" 1.55 NW40x50VCR $69 NW40x50VCR-M $69 3/4" 2.05 NW40x75VCR $125 NW40x75VCR-M $115 1" 2.27 NW40x100VCR $140 NW40x100VCR-M $130 1/8" 0.85 NW50x12VCR $56 NW50x12VCR-M $56 1/4" 1.36 NW50x25VCR $61 NW50x25VCR-M $61 NW50 3/8" 1.55 NW50x38VCR $69 NW50x38VCR-M $69 1/2" 1.55 NW50x50VCR $74 NW50x50VCR-M $74 NW to Male VCR 3/4" 2.05 NW50x75VCR $125 NW50x75VCR-M $115 VCR is a registered trademark of Cajon Company 1" 2.26 NW50x100VCR $140 NW50x100VCR-M $130 VCR VCR REFERENCE GUIGE 1/8 = VCR2 1/4" = VCR4 3/8 = VCR6 1/2" = VCR8 3/4" = VCR12 1 = VCR16 GASKETS - COPPER PART NUMBER Description Fits VCR Sizes Each CU-12VCR VCR Copper Gasket 1/8 VCR $2.50 CU-25VCR VCR Copper Gasket 1/4 VCR $2.50 CU-50VCR VCR Copper Gasket 3/8 or 1/2 VCR $2.50 CU-75VCR VCR Copper Gasket 3/4 VCR $4.00 CU-100VCR VCR Copper Gasket 1 VCR $5.00 VCR STYLE GLANDS - BUTT WELD PART NUMBER Description Tube Size Each 25VCR-LTBW VCR Weld Gland SS 1/4" $8 38VCR-LTBW VCR Weld Gland SS 3/8" $10 50VCR-LTBW VCR Weld Gland SS 1/2" $10 MALE & FEMALE VCR STYLE NUTS PART NUMBER Description Fits VCR Sizes Each 25VCRM-NUT Male VCR Nut SS $3.50 1/4 25VCR-NUT Female VCR Nut SS $ VCRM-NUT Male VCR Nut SS $6.50 3/8 or 1/2 50VCR-NUT Female VCR Nut SS $7.50 GAS LEAKS MANUFACTURED BY LDS FOR OVER 38 YEARS SEE PAGES

33 NW TO FEMALE OR MALE VCO FLANGE TUBE SIZE A FEMALE VCO SALE MALE VCO SALE NW16 NW25 1/8" 0.93 NW16x12VCO $46 NW16x12VCO-M $46 1/4" 0.82 NW16x25VCO $49 NW16x25VCO-M $49 3/8" 0.96 NW16x38VCO $56 NW16x38VCO-M $56 1/2" 0.96 NW16x50VCO $79 NW16x50VCO-M $69 1/8" 0.93 NW25x12VCO $49 NW25x12VCO-M $49 1/4" 0.82 NW25x25VCO $54 NW25x25VCO-M $54 3/8" 0.86 NW25X38VCO $62 NW25X38VCO-M $62 1/2" 0.86 NW25x50VCO $76 NW25x50VCO-M $66 3/4" 1.09 NW25x75VCO $120 NW25x75VCO-M $110 NW to Female VCO 1" 1.13 NW25x100VCO $139 NW25x100VCO-M $129 NW to Male VCO VCO is a registered trademark of Cajon Company Swagelok is a registered trademark of Crawford Fitting Company NW40 NW50 1/8" 0.93 NW40x12VCO $55 NW40x12VCO-M $55 1/4" 0.82 NW40x25VCO $58 NW40x25VCO-M $58 3/8" 0.86 NW40x38VCO $67 NW40x38VCO-M $67 1/2" 0.86 NW40x50VCO $81 NW40x50VCO-M $71 3/4" 0.99 NW40x75VCO $125 NW40x75VCO-M $115 1" 1.03 NW40x100VCO $139 NW40x100VCO-M $129 1/8" 0.93 NW50x12VCO $59 NW50x12VCO-M $59 1/4" 0.82 NW50x25VCO $63 NW50x25VCO-M $63 3/8" 0.86 NW50x38VCO $71 NW50x38VCO-M $71 1/2" 0.86 NW50x50VCO $87 NW50x50VCO-M $77 3/4" 0.99 NW50x75VCO $125 NW50x75VCO-M $115 1" 1.03 NW50x100VCO $141 NW50x100VCO-M $131 NW TO SWAGELOK FLANGE TUBE SIZE A PART NUMBER SALE VACUUM ESSENTIALS NW16 NW25 NW40 NW50 1/8" 1.28 NW16x12SWG $41 NW16x12SWG-VE $49 1/4" 1.55 NW16x25SWG $44 NW16x25SWG-VE $52 3/8" 1.68 NW16x38SWG $49 NW16x38SWG-VE $57 1/2" 1.97 NW16x50SWG $61 NW16x50SWG-VE $69 1/8" 1.28 NW25x12SWG $45 NW25x12SWG-VE $54 1/4" 1.55 NW25x25SWG $48 NW25x25SWG-VE $57 3/8" 1.63 NW25x38SWG $56 NW25x38SWG-VE $65 1/2" 1.97 NW25x50SWG $59 NW25x50SWG-VE $68 3/4" 2.03 NW25x75SWG $105 NW25x75SWG-VE $114 1" 2.50 NW25x100SWG $124 NW25x100SWG-VE $133 1/8" 1.28 NW40x12SWG $49 NW40x12SWG-VE $59 1/4" 1.55 NW40x25SWG $51 NW40x25SWG-VE $61 3/8" 1.63 NW40x38SWG $59 NW40x38SWG-VE $69 1/2" 1.97 NW40x50SWG $64 NW40x50SWG-VE $74 3/4" 1.94 NW40x75SWG $105 NW40x75SWG-VE $115 1" 2.50 NW40x100SWG $128 NW40x100SWG-VE $138 1/8" 1.28 NW50x12SWG $53 NW50x12SWG-VE $64 1/4" 1.55 NW50x25SWG $56 NW50x25SWG-VE $67 3/8" 1.63 NW50x38SWG $64 NW50x38SWG-VE $75 1/2" 1.97 NW50x50SWG $68 NW50x50SWG-VE $79 3/4" 1.94 NW50x75SWG $110 NW50x75SWG-VE $121 1" 2.52 NW50x100SWG $128 NW50x100SWG-VE $139 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) OVER 3500 VACUUM ITEMS ONLINE - LDSVACUUM.COM 33

34 WIRE REINFORCED PVC TUBING PART NUMBER ID LIST SALE PART NO. EACH 050-PVC-WR 0.50 $5 $4 050-HC $2 075-PVC-WR 0.75 $5 $4 075-HC $2 100-PVC-WR 1.00 $7 $5 100-HC $2 150-PVC-WR 1.50 $12 $9 150-HC $3 200-PVC-WR 2.00 $14 $ HC $3 TUBING ONLY, PER FOOT HOSE CLAMP NW TO WIRE REINFORCED PVC TUBING PART NUMBER LENGTH FLANGE VACUUM PRICE LIST SALE ID ESSENTIALS NW16-PVC $70 NW16-PVC24-VE $97 $ NW16-PVC $82 NW16-PVC48-VE $106 $98 NW25-PVC $78 NW25-PVC24-VE $116 $ NW25-PVC $96 NW25-PVC48-VE $128 $114 NW40-PVC $95 NW40-PVC24-VE $141 $ NW40-PVC $125 NW40-PVC48-VE $172 $145 NW50-PVC $130 NW50-PVC24-VE $198 $ NW50-PVC $160 NW50-PVC48-VE $223 $182 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) Wire reinforced PVC Tubing (clear), Stainless long butt flanges used, hose clamped on flange, Ready to use - Helium leak checked, available in custom lengths HOSE ADAPTOR - ALUMINUM PART NUMBER A B HOSE SIZE (ID) LIST SALE NW H or 0.62 $11 $7 NW H or 0.75 $11 $7 NW H or 0.75 $17 $11 NW H or 0.75 $18 $13 NW H or 0.87 Does not work with 1 Hose $13 $9 NW H or 1.62 $18 $11 NW H or 1.62 $24 $14 Compatible with standard vacuum hose bores used with rubber or plastic hose HOSE ADAPTOR - STAINLESS PART NUMBER A B C HOSE SIZE (ID) LIST SALE NW SH $20 $15 NW SH $25 $19 NW SH $30 $22 NW SH $38 $27 CUSTOM FLANGES AND COMPONENTS! 34

35 MATERIAL Aluminum LONG BUTT FLANGE TUBE SIZE B C PART NUMBER EACH VACUUM ESSENTIALS NW ALF $6 NW16-5-ALF-VE $ NW ALF $6 NW16-7-ALF-VE $ NW ALF $8 NW25-ALF-VE $ NW ALF $10 NW40-ALF-VE $ NW ALF $11 NW50-ALF-VE $22 Machined from solid bar No welds Stainless NW LF $13 NW10-LF-VE $ NW LF $10 NW16-50-LF-VE $ NW LF $10 NW16-75-LF-VE $ NW LF $12 NW25-LF-VE $ NW LF $14 NW40-LF-VE $ NW LF $20 NW50-LF-VE $31 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) HALF NIPPLE STAINLESS STEEL TUBE SIZE A B C PART NUMBER EACH VACUUM ESSENTIALS Butt weld, Leak Tested Custom Lengths Available NW HN $10 NW16-HN-VE $ NW HN $12 NW25-HN-VE $ NW HN $14 NW40-HN-VE $ NW HN $20 NW50-HN-VE $31 Wing Clamp (CW) & SS/Viton Centering Ring (SRV) NIPPLES STAINLESS STEEL FLANGE TUBE SIZE NW NW NW NW A (OAL) PART NUMBER SALE VACUUM ESSENTIALS 3.15 NW NS $28 NW16-NS-VE $ NW NL $33 NW16-NL-VE $ NW NS $32 NW25-NS-VE $ NW NL $37 NW25-NL-VE $ NW NS $40 NW40-NS-VE $ NW NL $47 NW40-NL-VE $ NW NS $49 NW50-NS-VE $ NW NL $55 NW50-NL-VE $76 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) EDWARDS MODEL RV12 - BRAND NEW SURPLUS# 625 List: $3639 Surplus: $2739 Edwards RV CFM NW25 Connections 58 LBS. 115V, 50/60 Hz, 1-ph Supplied With: INLET FILTER Gas Ballast Factory Warranty Ultragrade 19 oil NW clamp and ring Electrical supply cable Manual 35

36 36 BELLOWS & FLEXIBLE METAL HOSE STAINLESS Flange ID OD NW NW NW NW CUSTOM FLEXHOSE LENGTH AVAILABLE REDUCING FLEXHOSE FLNG PART NUMBER LENGTH WALL LIST SALE VACUUM ESSENTIALS NW F 4.0 $85 $45 NW16-F-VE $61 NW MH $105 $57 NW16-MH10-VE $73 NW MH $120 $81 NW16-MH12-VE $97 NW MH $170 $101 NW16-MH20-VE $117 NW16 NW MH $205 $129 NW16-MH30-VE $145 NW MH $215 $169 NW16-MH36-VE $185 NW MH $255 $158 NW16-MH40-VE $174 NW MH $270 $198 NW16-MH48-VE $214 NW MH $433 $294 NW16-MH80-VE $310 NW MH $649 $378 NW16-MH120-VE $394 NW F 4.0 $115 $48 NW25-F-VE $66 NW MH $133 $75 NW25-MH10-VE $93 NW MH $138 $94 NW25-MH12-VE $112 NW MH $165 $112 NW25-MH18-VE $130 NW MH $180 $113 NW25-MH20-VE $131 NW25 NW MH $185 $124 NW25-MH24-VE $142 NW MH $200 $139 NW25-MH30-VE $157 NW MH $215 $144 NW25-MH36-VE $162 NW MH $245 $156 NW25-MH40-VE $174 NW MH $250 $214 NW25-MH48-VE $232 NW MH $441 $331 NW25-MH80-VE $349 NW MH $659 $408 NW25-MH120-VE $426 NW F 4.0 $150 $57 NW40-F-VE $77 NW MH $176 $97 NW40-MH10-VE $117 NW MH $193 $118 NW40-MH15-VE $138 NW MH $230 $125 NW40-MH20-VE $ NW MH $250 $158 NW40-MH24-VE $178 NW40 NW MH $270 $154 NW40-MH30-VE $174 NW MH $295 $169 NW40-MH36-VE $189 NW MH $300 $190 NW40-MH40-VE $210 NW MH $345 $248 NW40-MH48-VE $268 NW MH80T $546 $408 NW40-MH80T-VE $428 NW MH120T $765 $468 NW40-MH120T-VE $488 NW F 4.0 $184 $72 NW50-F-VE $92 NW MH $206 $99 NW50-MH10-VE $120 NW MH $265 $124 NW50-MH20-VE $ NW MH $301 $170 NW50-MH30-VE $191 NW50 NW MH $330 $242 NW50-MH36-VE $263 NW MH $345 $238 NW50-MH40-VE $259 NW MH48T 48.0 $380 $278 NW50-MH48T-VE $299 NW MH80T $584 $452 NW50-MH80T-VE $473 NW MH120T $879 $488 NW50-MH120T-VE $509 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) REDUCING FLEXHOSE STAINLESS STEEL ID PART NUMBER LENGTH A B PRICE VACUUM ESSENTIALS 0.75 NW25x16-MH $125 NW25x16-MH10-VE $142 NW16 NW25 NW25x16-MH $145 NW25x16-MH20-VE $ NW40x16-MH $130 NW40x16-MH10-VE $148 NW16 NW40 NW40x16-MH $150 NW40x16-MH20-VE $ NW50x16-MH $135 NW50x16-MH10-VE $154 NW16 NW50 NW50x16-MH $160 NW50x16-MH20-VE $ NW40x25-MH $130 NW40x25-MH10-VE $149 NW25 NW40 NW40x25-MH $150 NW40x25-MH20-VE $ NW50x25-MH $135 NW50x25-MH10-VE $155 NW25 NW50 NW50x25-MH $160 NW50x25-MH20-VE $ NW50x40-MH $135 NW50x40-MH10-VE $156 NW40 NW50 NW50x40-MH $160 NW50x40-MH20-VE $181

37 NW to NW REDUCERS (REDUCING NIPPLES) SS Contact LDS For Special Length Reducers PART NUMBER FLANGE 1 FLANGE 2 NW25 Length LIST SALE VACUUM ESSENTIAL NW25X16 $40 $28 NW25X16-VE $45 NW40X16 NW16 NW $45 $29 NW40X16-VE $47 NW50X16 NW50 $52 $31 NW50X16-VE $50 NW40X25 NW40 $45 $30 NW40X25-VE $49 NW NW50X25 NW50 $55 $32 NW50X25-VE $52 NW50X40 NW40 NW $57 $35 NW50X40-VE $56 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) NW to NW REDUCERS (REDUCING NIPPLES) SS CONICAL REDUCER Contact LDS For Special Length Reducers PART NUMBER FLANGE 1 FLANGE 2 NW25 Length LIST SALE VACUUM ESSENTIAL NW25x16-CR $61 $28 NW25x16-CR-VE $45 NW40x16-CR NW16 NW $66 $29 NW40x16-CR-VE $47 NW50x16-CR NW50 $75 $31 NW50x16-CR-VE $50 NW40x25-CR NW40 $68 $30 NW40x25-CR-VE $49 NW NW50x25-CR NW50 $72 $32 NW50x25-CR-VE $52 NW50x40-CR NW40 NW $77 $35 NW50x40-CR-VE $56 2-Wing Clamps (CW) & 2-SS/Viton Centering Rings (SRV) NW to ISO STRAIGHT REDUCERS SS FLANGE FLANGE PART NUMBER A B SALE VACUUM ESSENTIAL 1 2 NW16xISO63 ISO63 $98 NW16xISO63-VE $143 NW16xISO80 NW16 ISO $119 NW16xISO80-VE $159 NW16xISO100 ISO100 $128 NW16xISO100-VE $169 NW25xISO63 ISO63 $99 NW25xISO63-VE $145 NW25xISO80 NW25 ISO $120 NW25xISO80-VE $166 NW25xISO100 ISO100 $130 NW25xISO100-VE $176 NW40xISO63 ISO $99 NW40xISO63-VE $146 NW40xISO80 ISO $112 NW40xISO80-VE $159 NW NW40xISO100 ISO $135 NW40xISO100-VE $182 NW40xISO160 ISO $175 NW40xISO160-VE $253 NW50xISO63 ISO $99 NW50xISO63-VE $147 NW50xISO80 ISO $119 NW50xISO80-VE $167 NW50xISO100 NW50 ISO $135 NW50xISO100-VE $183 NW50xISO160 ISO $185 NW50xISO160-VE $264 NW50xISO200 ISO $205 NW50xISO200-VE $301 Aluminum Double Claw Clamps, 1-Wing Clamp (CW) & 2-SS/Viton Centering Rings (SRV) NW to ISO CONICAL REDUCERS SS FLANGE FLANGE PART NUMBER A B C SALE 1 2 NW40xISO63-CR ISO $109 NW40xISO80-CR NW40 ISO $124 NW40xISO100-CR ISO $137 NW50xISO63-CR ISO $109 NW50xISO80-CR NW50 ISO $129 NW50xISO100-CR ISO $137 CONTACT LDS FOR ALTERNATE COMBINATIONS 37

38 NW TO CF FLANGE ADAPTORS PART NUMBER FLANGE A FLANGE B TYPE TUBE OD TYPE BOLT HOLES A B C PRICE NW16x CF $40 NW16x CF $65 NW16x CF $46 NW16x338 NW CF $105 NW16x CF $128 NW16x CF $136 NW16x CF $149 ISO TO CONFLAT REDUCERS - SEE PAGE 45 Other combinations available Consult the factory NW25x CF $42 NW25x CF $65 NW25x CF $48 NW25x338 NW CF $ NW25x CF $128 NW25x CF $136 NW25x CF $149 NW40x CF $49 NW40x CF $65 NW40x CF $53 NW40x338 NW CF $105 NW40x CF $128 NW40x CF $136 NW40x CF $149 NW50x CF $63 NW50x CF $65 NW50x CF $70 NW50x338 NW CF $105 NW50x CF $ NW50x CF $136 NW50x CF $149 NW TO CF FLANGE CONICAL ADAPTORS PART NUMBER FLANGE A FLANGE B TYPE TUBE OD TYPE TUBE OD A B C PRICE 212xNW16-CR 212 CF $64 NW xNW16-CR 275 CF $65 133xNW25-CR 133 CF $55 275xNW25-CR NW CF $68 338xNW25-CR 338 CF $90 133xNW40-CR 133 CF $58 212xNW40-CR 212 CF $68 338xNW40-CR NW CF $96 450xNW40-CR 450 CF $ xNW40-CR 462 CF $ xNW50-CR 212 CF $69 275xNW50-CR 275 CF $70 450xNW50-CR NW CF $ xNW50-CR 462 CF $ xNW50-CR 600 CF $156 Other combinations available - Consult the factory 38

39 USE WITH Tube Connections Vacuum Gauges Compression Type Buna o-ring 304 Stainless Steel NW TO QUICK COUPLING STAINLESS STEEL MAKE YOUR OWN PAGE 69 FLANGE PART NUMBER TUBE A B PRICE VACUUM ESSENTIALS NW16-Q06 1/ $52 NW16-Q06-VE $60 NW16-Q12 1/ $52 NW16-Q12-VE $60 NW16-Q18 3/ $52 NW16-Q18-VE $60 NW16 NW16-Q25 1/ $52 NW16-Q25-VE $60 NW16-Q31 5/ $60 NW16-Q31-VE $68 NW16-Q38 3/ $60 NW16-Q38-VE $68 NW16-Q50 1/ $60 NW16-Q50-VE $68 NW16-Q75 3/ $66 NW16-Q75-VE $74 NW25-Q06 1/ $63 NW25-Q06-VE $72 NW25-Q12 1/ $63 NW25-Q12-VE $72 NW25-Q18 3/ $63 NW25-Q18-VE $72 NW25-Q25 1/ $63 NW25-Q25-VE $72 NW25-Q31 5/ $63 NW25-Q31-VE $72 NW25 NW25-Q38 3/ $63 NW25-Q38-VE $72 NW25-Q50 1/ $63 NW25-Q50-VE $72 NW25-Q62 5/ $64 NW25-Q62-VE $73 NW25-Q75 3/ $67 NW25-Q75-VE $76 NW25-Q87 7/ $76 NW25-Q87-VE $85 NW25-Q $80 NW25-Q100-VE $89 NW25-Q / $87 NW25-Q112-VE $96 NW40-Q06 1/ $68 NW40-Q06-VE $78 NW40-Q12 1/ $68 NW40-Q12-VE $78 NW40-Q18 3/ $68 NW40-Q18-VE $78 NW40-Q25 1/ $68 NW40-Q25-VE $78 NW40-Q31 5/ $68 NW40-Q31-VE $78 NW40-Q38 3/ $68 NW40-Q38-VE $78 NW40-Q50 1/ $68 NW40-Q50-VE $78 NW40 NW40-Q62 5/ $71 NW40-Q62-VE $81 NW40-Q75 3/ $71 NW40-Q75-VE $81 NW40-Q87 7/ $82 NW40-Q87-VE $92 NW40-Q $82 NW40-Q100-VE $92 NW40-Q / $109 NW40-Q112-VE $119 NW40-Q / $135 NW40-Q125-VE $145 NW40-Q / $150 NW40-Q138-VE $160 NW40-Q / $155 NW40-Q150-VE $165 NW50-Q06 1/ $77 NW50-Q06-VE $88 NW50-Q12 1/ $77 NW50-Q12-VE $88 NW50-Q18 3/ $77 NW50-Q18-VE $88 NW50-Q25 1/ $77 NW50-Q25-VE $88 NW50-Q31 5/ $77 NW50-Q31-VE $88 NW50 NW50-Q38 3/ $77 NW50-Q38-VE $88 NW50-Q50 1/ $77 NW50-Q50-VE $88 NW50-Q75 3/ $82 NW50-Q75-VE $93 NW50-Q $92 NW50-Q100-VE $97 NW50-Q / $120 NW50-Q112-VE $125 NW50-Q / $172 NW50-Q150-VE $177 NW50-Q $185 NW50-Q200-VE $190 LEAK DETECTOR TEST PORT ADAPTOR PART NUMBER PORT A LIST SALE VACUUM ESSENTIALS NW LD 1-1/ $58 $37 NW16-112LD-VE $45 NW LD 1-1/ $58 $37 NW25-112LD-VE $46 NW LD 1-1/ $63 $40 NW40-112LD-VE $50 NW LD 1-1/ $69 $43 NW50-112LD-VE $54 1-Wing Clamp (CW) & 1-SS/Viton Centering Ring (SRV) 39

40 FEATURES OF LDS ISO (LARGE FLANGE) COMPONENTS ISO CLAMP FLANGE (ISO-K, ISO & LF) FLANGE TUBING (OD X WALL) A (O.D.) ISO x (95) ISO x (110) ISO x (130) ISO x (180) ISO x (240) ISO x (290) ISO320 ISO400 ISO x (PIPE) x (PIPE) x (PIPE) (370) (450) (550) B (THICKNESS) 0.47 (12) CLAMPS (RECOMMENDED) ISO BOLTED FLANGE (ISO-F, ISO-B & LFB) FLANGE C BOLT D E F Wrench (O.D.) HOLES (THICKNESS) (BOLT CIRCLE) (BOLT HOLES) (mm) 3-4 ISO-B (130) (12) ISO-B (12) (145) (12) ISO-B (12) (165) ISO-B (12) (225) (12) (16) ISO-B (12) (285) (16) ISO-B (12) (335) (16) ISO-B (17) (425) (20) ISO-B (17) (510) (20) ISO-B (17) (610) (20) 4.33 (110) 4.92 (125) 5.71 (145) 7.87 (200) (260) (310) (395) (480) (580) 0.35 (9) 0.35 (9) 0.35 (9) 0.43 (11) 0.43 (11) 0.43 (11) 0.55 (14) 0.55 (14) 0.55 (14) ISO flanges are sexless, infinitely rotatable, self-centering, and available for either internal or butt welding. ISO-B (bolted) flanges are sexless, self-centering, available for either internal or butt welding, and if bolted to a rotatable bolt ring (which contain an ISO style flange) can be infinitely rotatable. Helium leak checked: less than 1x10-9 standard cc/second Flange interface dimensions are made to ISO standards and are interchangeable with all components made to these standards. Custom configurations are available and made to the same exacting requirements as standard components. Call our engineering staff to discuss your special needs. ISO-B FLANGES USE STANDARD CENTERING RINGS - SEE PAGE 42 & 43 PLASTIC CAPS - ISO SERIES PART NUMBER FLANGE SIZE $1 ISO63-PC Fits ISO63 Claw Clamp Style Fittings and Flanges $1 ISO80-PC Fits ISO80 Claw Clamp Style Fittings and Flanges $1 ISO100-PC Fits ISO100 Claw Clamp Style Fittings and Flanges $1 ISO160-PC Fits ISO160 Claw Clamp Style Fittings and Flanges $1 ISO200-PC Fits ISO200 Claw Clamp Style Fittings and Flanges $2 ISO250-PC Fits ISO250 Claw Clamp Style Fittings and Flanges $3 PROTECT YOUR FLANGES FROM NICKS AND SCRATCHES 40

41 BOLTED BLANKS STAINLESS STEEL PART NUMBER A B HOLES LIST SALE ISO-B SB $83 $55 ISO-B SB $115 $68 ISO-B SB $127 $80 ISO-B SB $240 $204 ISO-B SB $300 $255 ISO-B SB $445 $430 BOLTED WELD FLANGES STAINLESS STEEL PART NUMBER TUBE A B C LIST SALE ISO-B SF $78 $50 ISO-B SF $115 $68 ISO-B SF $125 $80 ISO-B SF $240 $204 ISO-B SF $300 $255 ISO-B SF $370 $320 Internal Weld, Self Aligning, Accepts Standard Inch Tubing, Use Bolts to Tighten BOLTED HALF NIPPLES STAINLESS STEEL PART NUMBER TUBE A B C HOLES PRICE ISO-B LF $127 ISO-B LF $149 ISO-B LF $165 ISO-B LF $240 ISO-B LF $315 ISO-B LF $375 Contact LDS for special lengths DOUBLE FLANGE BOLT KITS PART NUMBER BOLT SIZE # SALE PART NUMBER BOLT SIZE # SALE ISOB63-BD M8x40 4 $5 ISOB200/250-BD M10x50 12 $31 ISOB80/100-BD M8x40 8 $11 ISOB320-BD M12x60 12 $47 Fastens ISOB flanges ISOB160-BD M10x50 8 $20 ISOB400/500-BD M12x60 16 $59 ROTATABLE BOLT RING WITH SPLIT RETAINING RING ROTATABLE BOLT RING SPLIT RETAINING RING PART NUMBER OD THICK LIST SALE PART NUMBER THICK LIST SALE RBR-SS ISO RBR-SS $145 $42 ISO RR-SS $27 $10 ISO RBR-SS $155 $57 ISO RR-SS $32 $10 ISO RBR-SS $175 $78 ISO RR-SS $32 $10 ISO RBR-SS $350 $109 ISO RR-SS $34 $12 ISO RBR-SS $385 $229 ISO RR-SS $37 $23 RR-SS For use with ISO Flange to create bolted rotatable configurations OD and bolt pattern match bolted flange RBR-SS Includes Split Retaining Ring (RR-SS) 41

42 CENTERING RINGS Aluminum or Stainless Buna-N: 100 o C Max Silicone: 200 o C Max Viton: 200 o C Max AOR SERIES Aluminum Outer Ring SCREEN MESH 28 Holes Per Inch Viton is a registered trademark of DuPont Dow Elastomers CENTERING RINGS - ALL TYPES FLNG A B ISO63 ISO80 ISO100 ISO160 ISO200 ISO250 ISO Stainless Centering With Aluminum Outer Ring O-Ring Provided Aluminum Centering With Aluminum Outer Ring ISO SR-V $25 Viton ISO AR-V $20 ISO SR-S $30 Silicone ISO AR-S $25 ISO SR-B $30 Buna-N ISO AR-B $25 MESH SCREEN RING O-RING O-RING REPLACEMENTS ISO SRV-SM $97 Viton ISO OV $4 ISO SRS-SM $102 Silicone ISO OS $2 ISO SRB-SM $102 Buna-N ISO OB $1 Aluminum Outer Ring (only) ISO AOR $5 ISO SR-V $25 Viton ISO AR-V $25 ISO SR-S $30 Silicone ISO AR-S $28 ISO SR-B $30 Buna-N ISO AR-B $28 MESH SCREEN RING O-RING O-RING REPLACEMENTS ISO SRV-SM $115 Viton ISO OV $5 ISO SRS-SM $120 Silicone ISO OS $2 ISO SRB-SM $120 Buna-N ISO OB $1 Aluminum Outer Ring (only) ISO AOR $5 ISO SR-V $25 Viton ISO AR-V $25 ISO SR-S $30 Silicone ISO AR-S $30 ISO SR-B $30 Buna-N ISO AR-B $30 MESH SCREEN RING O-RING O-RING REPLACEMENTS ISO SRV-SM $135 Viton ISO OV $7 ISO SRS-SM $140 Silicone ISO OS $3 ISO SRB-SM $140 Buna-N ISO OB $1 Aluminum Outer Ring (only) ISO AOR $5 ISO SR-V $50 Viton ISO AR-V $34 ISO SR-S $55 Silicone ISO AR-S $39 ISO SR-B $55 Buna-N ISO AR-B $39 MESH SCREEN RING O-RING O-RING REPLACEMENTS ISO SRV-SM $170 Viton ISO OV $15 ISO SRS-SM $175 Silicone ISO OS $4 ISO SRB-SM $175 Buna-N ISO OB $2 Aluminum Outer Ring (only) ISO AOR $5 ISO SR-V $70 Viton ISO AR-V $40 ISO SR-S $75 Silicone ISO AR-S $45 ISO SR-B $75 Buna-N ISO AR-B $45 Aluminum Outer Ring (only) ISO AOR $8 Viton O-Ring Replacement ISO OV $16 Silicone O-Ring Replacement ISO OS $5 Buna O-Ring Replacement ISO OB $3 ISO SR-V $85 Viton ISO AR-V $60 ISO SR-S $93 Silicone ISO AR-S $68 ISO SR-B $93 Buna-N ISO AR-B $68 Aluminum Outer Ring (only) ISO AOR $9 Viton O-Ring Replacement ISO OV $17 Silicone O-Ring Replacement ISO OS $6 Buna O-Ring Replacement ISO OB $4 ISO SR-V $180 Viton ISO AR-V $112 ISO SR-S $190 Silicone ISO AR-S $122 ISO SR-B $190 Buna-N ISO AR-B $122 Aluminum Outer Ring (only) ISO AOR $18 Viton O-Ring Replacement ISO OV $29 Silicone O-Ring Replacement ISO OS $12 Buna O-Ring Replacement ISO OB $5 42

43 CENTERING RINGS Aluminum or Stainless ISO SERIES RINGS - ALL TYPES FLNG A B ISO400 ISO Stainless Centering With Aluminum Outer Ring O-Ring Provided Aluminum Centering With Aluminum Outer Ring ISO SR-V $485 Viton ISO AR-V $198 ISO SR-S $498 Silicone ISO AR-S $208 ISO SR-B $498 Buna-N ISO AR-B $208 Aluminum Outer Ring (only) ISO AOR $17 Viton O-Ring Replacement ISO OV $31 Silicone O-Ring Replacement ISO OS $14 Buna O-Ring Replacement ISO OB $7 ISO SR-V $1300 Viton ISO AR-V $315 ISO SR-S $1250 Silicone ISO AR-S $290 ISO SR-B $1250 Buna-N ISO AR-B $250 Viton O-Ring Replacement ISO OV $44 Silicone O-Ring Replacement ISO OS $16 Buna O-Ring Replacement ISO OB $10 ISO CLAW CLAMPS - ALL TYPES SINGLE CLAW CLAMP, ALUMINUM A B C D FLANGE SIZES PART NUMBER SALE , 80, 100 ISO63/100-C $ , 200, 250 ISO160/250-C $ , 400, 500 ISO320/500-C $5 DOUBLE CLAW CLAMP, ALUMINUM A B C FLANGE SIZES PART NUMBER SALE Single Claw Double Claw , 80, 100 ISO63/100-DC $ , 200, 250 ISO160/250-DC $ , 400, 500 ISO320/500-DC $6 Double Claw S/S DOUBLE CLAW CLAMP, STAINLESS A B C FLANGE SIZES PART NUMBER SALE , 80, 100, 160, 200, 250 ISO63/250-DC-S $ , 400, 500 ISO320/500-DC-S $14 ISO BLANK FLANGE - ALUMINUM OR STAINLESS PART NUMBER MATERIAL A B LIST SALE ESSENTIALS CLAMPS SALE ISO AB Aluminum $43 $28 ISO63-AB-VE $ ISO SB Stainless $55 $39 ISO63-SB-VE $73 ISO AB Aluminum $57 $36 ISO80-AB-VE $ ISO SB Stainless $72 $49 ISO80-SB-VE $84 ISO AB Aluminum $63 $40 ISO100-AB-VE $ ISO SB Stainless $83 $57 ISO100-SB-VE $92 ISO AB Aluminum $100 $56 ISO160-AB-VE $ ISO SB Stainless $110 $71 ISO160-SB-VE $129 ISO AB Aluminum $145 $92 ISO200-AB-VE $ CLOSE OFF UNUSED PORTS ISO SB Stainless $176 $130 ISO200-SB-VE $209 ISO AB Aluminum $185 $118 ISO250-AB-VE 6 $211 ISO SB Stainless $230 $185 ISO250-SB-VE $279 ISO63, ISO80, ISO100, ISO160, ISO200 & ISO250 Aluminum Double Claw Clamps (DC) & 1-Stainless/Viton Centering Ring (SR-V) ISO AB Aluminum $450 $338 ISO320-AB-VE $ ISO SB Stainless $998 $484 ISO320-SB-VE $680 ISO SB Stainless $1100 $499 ISO400-SB-VE 8 $699 ISO SB Stainless $1973 $938 ISO500-SB-VE 12 $1269 ISO320, ISO400 & ISO500 Aluminum Double Claw Clamps (DC) & 1-Aluminum/Viton Centering Ring (AR-V) 43

44 Contact LDS For Custom Lengths SHORT WELD FLANGE - ALUMINUM OR STAINLESS PART NUMBER MATERIAL LIST SALE TUBE OD STUB WELD FLANGE - ALUMINUM PART NUMBER A B LIST SALE ESSENTIALS Clamps LIST SALE ISO AS $56 $42 ISO63-AS-VE 4 $134 $79 ISO AS $70 $52 ISO80-AS-VE 4 $164 $89 ISO AS $73 $67 ISO100-AS-VE 4 $165 $104 ISO AS $105 $80 ISO160-AS-VE 4 $230 $144 ISO AS $170 $124 ISO200-AS-VE 6 $328 $222 Aluminum Double Claw Clamps (DC) & 1-SS/Viton Centering Ring (SRV) Butt Weld Aluminum Accepts Standard Inch Tubing Infinitely Rotatable Use Clamps Or Rotatable Bolt Ring ISO HALF NIPPLE STAINLESS PART NUMBER A B C LIST SALE ESSENTIALS Clamps LIST SALE ISO LF $110 $67 ISO63-LF-VE 4 $188 $100 ISO LF $121 $71 ISO80-LF-VE 4 $215 $104 ISO LF $132 $88 ISO100-LF-VE 4 $224 $121 ISO LF $176 $109 ISO160-LF-VE 4 $301 $169 ISO LF $250 $161 ISO200-LF-VE 6 $408 $236 ISO LF $451 $243 ISO250-LF-VE 6 $631 $323 Aluminum Double Claw Clamps (DC) & 1-SS/Viton Centering Ring (SRV) Butt Weld 304 Stainless Accepts Standard Inch Tubing ISO FULL NIPPLE STAINLESS PART NUMBER A FLANGES LIST SALE ESSENTIALS Clamps LIST SALE ISO NS 4.18 $200 $132 ISO63-NS-VE $356 $198 ISO63 8 ISO NL 6.92 $210 $140 ISO63-NL-VE $366 $206 ISO NS 4.18 $240 $152 ISO80-NS-VE $428 $218 ISO80 8 ISO NL 7.72 $250 $160 ISO80-NL-VE $438 $226 ISO NS 4.18 $255 $164 ISO100-NS-VE $439 $230 ISO100 8 ISO NL 8.50 $265 $172 ISO100-NL-VE $449 $238 ISO NS 4.18 $395 $248 ISO160-NS-VE $645 $369 ISO160 8 ISO NL $415 $264 ISO160-NL-VE $665 $384 ISO NS 4.18 $525 $372 ISO200-NS-VE $841 $522 ISO ISO NL $560 $384 ISO200-NL-VE $876 $534 ISO NS 4.18 ISO250 $705 $482 ISO250-NS-VE 12 $1065 $642 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) A THRU HOLE B C OFFSET D ISO SF Stainless $55 $37 ISO ASF Aluminum $43 $ ISO SF Stainless $67 $44 ISO ASF Aluminum $54 $ ISO SF Stainless $72 $48 ISO ASF Aluminum $60 $ ISO SF Stainless $105 $69 ISO ASF Aluminum $100 $ ISO SF Stainless $170 $102 ISO ASF Aluminum $150 $ ISO SF Stainless $215 $158 ISO ASF Aluminum $175 $ ISO SF Stainless $998 $ ISO SF Stainless $1100 $ ISO SF Stainless $1863 $ USE WITH TUBE END FLANGES TO MAKE ELBOWS, TEES AND CROSSES 44

45 ISO to ISO REDUCERS (REDUCING NIPPLES) S/S STRAIGHT REDUCER FLANGE 1 FLANGE 2 TUBE OD A B SALE ISO63xISO80 ISO80 $175 ISO63xISO100 ISO63 ISO $190 ISO63xISO160 ISO160 $240 ISO80xISO100 ISO80 ISO $240 ISO100xISO160 ISO100 ISO $270 ISO160xISO200 ISO200 $345 ISO ISO160xISO250 ISO250 $419 ISO200xISO250 ISO200 ISO $519 CONICAL REDUCER FLANGE 1 FLANGE 2 A B C SALE ISO63xISO80-CR ISO $190 ISO ISO63xISO100-CR ISO $200 ISO80 ISO100-CR ISO $150 ISO ISO80xISO160-CR ISO $340 ISO100xISO160-CR ISO100 ISO $245 ISO TO CONFLAT REDUCERS (REDUCING NIPPLES) S/S PART NUMBER FLANGE 1 FLANGE 2 TUBE OD A B PRICE ISO63x450 ISO CF $193 ISO80x CF $221 ISO ISO80x CF $245 ISO100x600 ISO CF $254 ISO160x800 ISO CF $405 ISO200x1000 ISO CF $605 ALTERNATE CONFIGURATIONS AVAILABLE ISO TO CONFLAT REDUCERS (REDUCING NIPPLES) S/S Contact LDS For Additional Sizes PART NUMBER FLANGE 1 FLANGE 1 FLANGE 2 FLANGE 2 CONFLAT TUBE OD TUBE OD A PRICE 275xISO63-CR ISO $ CF xISO80-CR ISO $ xISO63-CR ISO $ xISO80-CR 3.38 CF 2.00 ISO $ xISO100-CR ISO $ xISO80-CR ISO $ CF xISO100-CR ISO $ xISO63-CR ISO $ CF xISO100-CR ISO $ xISO63-CR ISO $ CF xISO80-CR ISO $260 ISO TO FLEXIBLE METAL HOSE STAINLESS PART NUMBER HOSE ID A WALL SALE VACUUM ESSENTIALS Contact LDS For Additional Lengths ISO F $205 ISO63-F-VE $ ISO MH $236 ISO63-MH10-VE $302 ISO F $255 ISO80-F-VE $ ISO MH $260 ISO80-MH10-VE $326 ISO F $280 ISO100-F-VE $ ISO MH $380 ISO100-MH10-VE $446 ISO F $480 ISO160-F-VE $630 ISO F $880 ISO200-F-VE $1040 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) 45

46 45 o ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO E $230 $160 ISO63-E45-VE 8 $386 $210 ISO E $255 $165 ISO80-E45-VE 8 $443 $220 ISO E $290 $229 ISO100-E45-VE 8 $474 $284 ISO E $560 $459 ISO160-E45-VE 8 $810 $593 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) MITRED ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO E90M 3.46 $195 $143 ISO63-E90M-VE 8 $351 $193 ISO E90M 3.86 $235 $176 ISO80-E90M-VE 8 $423 $231 ISO E90M 4.25 $264 $180 ISO100-E90M-VE 8 $448 $235 ISO E90M 5.43 $473 $365 ISO160-E90M-VE 8 $723 $498 ISO E90M 6.61 $580 $522 ISO200-E90M-VE 12 $896 $672 ISO E90M 8.19 $1350 $1215 ISO250-E90M-VE 12 $1710 $1395 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) 90 o ELBOWS STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO E $205 $145 ISO63-E90-VE 8 $361 $195 ISO E $255 $152 ISO80-E90-VE 8 $443 $207 ISO E $270 $161 ISO100-E90-VE 8 $454 $216 ISO E $570 $480 ISO160-E90-VE 8 $820 $620 ISO E $595 $510 ISO200-E90-VE 12 $911 $660 ISO E $850 $705 ISO250-E90-VE 12 $1210 $885 Aluminum Double Claw Clamps (DC) & 2-SS/Viton Centering Rings (SRV) TEES STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO T 3.25 $290 $195 ISO63-T-VE 12 $524 $290 ISO T 3.50 $390 $219 ISO80-T-VE 12 $672 $314 ISO T 4.13 $400 $219 ISO100-T-VE 12 $676 $324 ISO T 5.25 $610 $525 ISO160-T-VE 12 $985 $690 ISO T 7.25 $1015 $805 ISO200-T-VE 18 $1489 $1057 ISO T 9.75 $1575 $1123 ISO250-T-VE 18 $2115 $1413 Aluminum Double Claw Clamps (DC) & 3-SS/Viton Centering Rings (SRV) ISO REDUCING TEE STAINLESS STEEL PART NUMBER FLANGE TUBE FLANGE TUBE 1&2 OD 3 OD A B LIST SALE ISO80xISO63-T ISO ISO $415 $239 ISO100xISO63-T ISO $325 $249 ISO ISO100xISO80-T ISO $365 $279 ISO160xISO63-T ISO $450 $398 ISO160xISO80-T ISO ISO $490 $420 ISO160xISO100-T ISO $650 $490 ISO200xISO63-T ISO $872 $772 ISO200xISO100-T ISO ISO $939 $839 ISO200xISO160-T ISO $980 $885 CONTACT LDS FOR ALTERNATE CONFIGURATIONS 46

47 4-WAY CROSSES STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO X 3.25 $385 $255 ISO63-X-VE 16 $567 $385 ISO X 3.50 $560 $420 ISO80-X-VE 16 $936 $556 ISO X 4.13 $627 $425 ISO100-X-VE 16 $995 $569 ISO X 5.25 $1150 $860 ISO160-X-VE 16 $1578 $1097 ISO X 7.25 $1764 $1335 ISO200-X-VE 24 $2396 $1675 ISO X 9.75 $2275 $1788 ISO250-X-VE 24 $2995 $2180 Aluminum Double Claw Clamps (DC) & 4-SS/Viton Centering Rings (SRV) 5-WAY CROSSES STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO X $615 $515 ISO63-5X1-VE 20 $1005 $700 ISO X 3.50 $780 $680 ISO80-5X-VE 20 $1250 $965 ISO X $890 $790 ISO100-5X1-VE 20 $1350 $1075 Aluminum Double Claw Clamps (DC) & 5-SS/Viton Centering Rings (SRV) 6-WAY CROSSES STAINLESS STEEL PART NUMBER A LIST SALE ESSENTIALS CLAMPS LIST SALE ISO X $715 $615 ISO63-6X1-VE 24 $1183 $825 ISO X 3.50 $915 $815 ISO80-6X-VE 24 $1479 $1025 ISO X $980 $880 ISO100-6X1-VE 24 $1532 $1090 Aluminum Double Claw Clamps (DC) & 6-SS/Viton Centering Rings (SRV) ISO REDUCING CROSS STAINLESS STEEL PART NUMBER FLANGE TUBE FLANGE TUBE 1&2 OD 3 &4 OD A B LIST SALE ISO80xISO63-X ISO ISO $500 $315 ISO100xISO63-X ISO $570 $375 ISO ISO100xISO80-X ISO $670 $460 ISO160xISO63-X ISO $790 $590 ISO160xISO80-X ISO ISO $840 $682 ISO160xISO100-X ISO $1000 $753 ISO200xISO160-X ISO ISO $1470 $1105 ISO TO QUICK COUPLING STAINLESS STEEL PART NUMBER TUBE SIZE A SALE VACUUM ESSENTIALS Clamps SALE ISO63xQ $128 ISO63xQ100-VE $158 ISO63xQ $152 ISO63xQ112-VE $182 4 ISO63xQ $184 ISO63xQ125-VE $214 ISO63xQ $255 ISO63xQ200-VE $285 ISO80xQ $140 ISO80xQ100-VE $170 ISO80xQ $164 ISO80xQ112-VE $194 4 ISO80xQ $204 ISO80xQ150-VE $234 ISO80xQ $270 ISO80xQ200-VE $299 ISO100xQ $152 ISO100xQ100-VE $182 ISO100xQ $208 ISO100xQ125-VE $238 4 ISO100xQ $224 ISO100xQ150-VE $254 ISO100xQ $285 ISO100xQ200-VE $315 Aluminum Double Claw Clamps (DC) & 1-SS/Viton Centering Ring (SRV) CUSTOM CONFIGURATIONS AVAILABLE 47

48 CONFLAT FLANGE - REFERENCE CHART FLANGE LDS VARIAN DIN EUROPEAN HOLES EQUIVALENT REFERENCE REFERENCE REFERENCE REFERENCE 1.33 OD NW16CF DN16CF CF OD NW25CF 2.75 OD NW35CF DN35CF CF35, CF38, CF OD NW50CF 4.50 OD NW63CF DN63CF CF63, CF OD NW75CF 6.00 OD NW100CF DN100CF CF OD NW130CF 8.00 OD NW150CF DN150CF CF150, CF OD NW200CF DN200CF CF OD NW250CF DN250CF CF OD NW275CF OD DN300 CF OD OD DN350 CF350 Operation and Applications: LDS CF flanges offer superior leak-free performance for vacuum applications requiring 1x10-13 torr or higher and temperature ranges from -196 o C to +500 o C. Each flange face has an identical knife edge. These flanges are tightened together with a copper gasket between them to form an extremely reliable leak tight seal. CF flanges are especially designed for ultra-high vacuum. The CF flange system is superior for applications requiring very clean environments, high temperatures and for the containment of toxic, corrosive or radioactive gases. ROTATABLE NON-ROTATABLE GASKET Information on Assembly, Hardware and Accessories: LDS offers all hardware necessary to assemble CF flanges and fittings. The copper gasket is captured between mating CF flanges. Gaskets are made from high-purity, oxygen free 1 /4 hard copper which is de-burred, chemically treated and individually packaged. BOLT KIT Reusable Viton Gaskets: 1x10-8 torr Temperature range from -70 o C up to 50 o C (Intermittent use to 200 o C) LDS offers high tensile stainless bolts, washers and nuts. These are available in standard versions and 12 point (dodecagon) style. Bakeout: For high temperature bakeouts, use LDS high temperature thread lubricant to prevent galling and seizing. See Page 4 Maximum torque requirements to generate vacuum tight seals: 12-POINT BOLTS HEX-HEAD BOLTS 1.33 O.D. (Mini ) 5 ft/lbs OD 16 ft/lbs OD 26 ft/lbs. Note: Over-torquing can result in broken bolts Plate Nuts: LDS plate nuts as the most convenient way of mating flanges. These plate nuts allow two adjacent bolts to be coupled to a single nut piece. A must for areas where accessibility is limited and reduced access does not allow enough clearance for tools. Conflat is a registered trademark of Varian Associates Viton is a registered trademark of DuPont Dow Elastomers 48

49 NON-ROTATABLE 1.33 CF ROTATABLE 1.33 CF 1.33 OD CONFLAT FLANGES 6-BOLT HOLES NON-ROTATABLE THROUGH HOLES (6) PART NUMBER PRICE A B C DIAMETER $ $ $ $ $ WN = Weld Neck WNB = Weld neck, No.060 weld prep WN $ WNB $ WN $ WNB $ TAPPED HOLES (6), NON-ROTATABLE PART NUMBER PRICE A B C THREAD T $ T $ T $ T $ T $ WN = Weld Neck WNB = Weld neck, No.060 weld prep WN-T $ WNB-T $ WN-T $ WNB-T $ ROTATABLE THROUGH HOLES (6) PART NUMBER PRICE A B C DIAMETER R $ R $ R $ R $ R $ WN = Weld Neck WNB = Weld neck, No.060 weld prep R-WN $ R-WNB $ R-WN $ R-WNB $ TAPPED HOLES (6), ROTATABLE R-T $ R-T $ R-T $ R-T $ R-T $ WN = Weld Neck WNB = Weld neck, No.060 weld prep R-WN-T $ R-WNB-T $ R-WN-T $ R-WNB-T $ HARDWARE AND SEALS OD CF 133-BK $4 6 Bolt, Nut & Washers 133-PN $3 3 Plate Nuts Thru Hole CF 133-PNK $7 3 Plate Nuts, 6 Bolt/Washers 133-BT $5 6 Bolt/Washers Tapped Hole 133-VG $12 5 Viton Gaskets 133-CG $14 10 Copper Gaskets All 1.33 OD CF 133-PC $ Copper Gaskets 49

50 OD CONFLAT FLANGES 4-BOLT HOLES NON-ROTATABLE, (4) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ $ $ $ ROTATABLE, (4) THROUGH HOLES R $ R $ R $ R $ R $ NON-ROTATABLE, (4) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ / T $ / T $ / T $ /4-28 ROTATABLE, (4) TAPPED HOLES R-T $ / R-T $ / R-T $ / R-T $ / R-T $ /4-28 HARDWARE AND SEALS FOR 2.12 OD CONFLAT FLANGE 212-BK $4 (4) BOLT, NUT & WASHER KIT 212-BK-12 $5 (4) 12-PT BOLT & NUT KIT 212-BT $5 (4) BOLT & WASHER KIT 212-BT12 $5 (4) 12-PT BOLTS & WASHER KIT 212-VG $22 (5) VITON GASKETS 212-CG $18 (10) COPPER GASKETS 12-PT-WRN $12 12-POINT WRENCH PLASTIC COVERS - PROTECT YOUR FLANGES PART NUMBER PRICE DESCRIPTION SERIES 133-PC $.50 Fits 1.33 Mini CF White Series 212-PC $1 Fits 2.12 CF Red Series 275-PC $.50 Fits 2.75 CF White Series 338-PC $1 Fits 3.38 CF Red Series 450-PC $1 Fits 4.50 CF White Series 462-PC $2 Fits 4.62 CF Red Series 600-PC $2 Fits 6.00 CF White Series 800-PC $3 Fits 8.00 CF White Series 1000-PC $4 Fits CF White Series Protect your flanges from scratches and nicks with PROTECTIVE PLASTIC CAPS Thru Hole CF Tapped Hole CF All 2.12 OD CF

51 2.75 OD CONFLAT FLANGES 6-BOLT HOLES NON-ROTATABLE, (6) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ $ $ $ $ $ $ ROTATABLE, (6) THROUGH HOLE R $ R $ R $ R $ R $ R $ R $ R $ NON-ROTATABLE, (6) TAPPED HOLES PART NUMBER PRICE A B C D E F Thread T $ / T $ / T $ / T $ / T $ / T $ / T $ /4-28 ROTATABLE, (6) TAPPED HOLES R-T $33 A / R-T $ / R-T $ / R-T $ / R-T $ / R-T $ / R-T $ /4-28 HARDWARE AND SEALS FOR 2.75 OD CONFLAT FLANGE 275-BK $5 (6) BOLTS, NUT & WASHER KIT 275-PN $3 (3) PLATE NUTS 275-PNK $10 (3) PLATE NUTS, (6) BOLTS & WASHERS 275-BK-12 $7 (6) 12-PT BOLTS, NUT & WASHER KIT 275-PNK-12 $11 (3) PLATE NUTS, (6) 12-PT BOLT/WASHER 275-BT $6 (6) BOLTS & WASHER KIT 275-BT12 $7 (6) 12-PT BOLTS & WASHER KIT 275-VG $15 (5) VITON GASKETS 275-CG $16 (10) COPPER GASKETS 275-PC $.50 PLASTIC CAP, WHITE SERIES 12-PT-WRN $12 12-POINT WRENCH Thru Hole CF Tapped Hole CF All 2.75 OD CF 51

52 Leak Testing: On-site or at our facility OD CONFLAT FLANGES 8-BOLT HOLES NON-ROTATABLE, (8) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ $ ROTATABLE, (8) THROUGH HOLES R $ R $ R $ NON-ROTATABLE, (8) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ / T $ /16-24 ROTATABLE, (8) TAPPED HOLES R-T $ / R-T $ / R-T $ / OD CONFLAT FLANGE - HARDWARE AND SEALS 338-BK $9 (8) BOLT, NUT & WASHER KIT 338-PN $7 (4) PLATE NUTS ON-SITE LEAK TESTING Man and Machine or using your equipment 338-PNK $16 (4) PLATE NUTS, (8) BOLTS & WASHERS 338-BK-12 $14 (8) 12-PT BOLT, NUT & WASHER KIT 338-PNK-12 $21 (4) PLATE NUT, (8) 12-PT BOLT/WASHER 338-BT $6 (8) BOLTS & WASHER KIT 338-BT12 $14 (8) 12-PT BOLTS & WASHER KIT 338-VG $11 (1) VITON GASKET 338-VG-5 $50 (5) VITON GASKET 338-CG $24 (10) COPPER GASKETS 338-PC $1 PLASTIC CAP, RED SERIES 12-PT-WRN $12 12-POINT WRENCH Thru Hole CF Tapped Hole CF All 3.38 OD CF IN-HOUSE LEAK TESTING - SEND LDS YOUR PRODUCTS Includes part leak test certification No project too large or too small 48 HOUR SERVICE $95 per hour - 2 Hour Minimum AVAILABLE! Estimates given BEFORE work begins LDS can even make your leak test fixture LET US DO THE WORK FOR YOU! 52

53 4.50 OD CONFLAT FLANGES 8-BOLT HOLES NON-ROTATABLE, (8) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ $ $ ROTATABLE, (8) THROUGH HOLES R $ R $ R $ R $ NON-ROTATABLE, (8) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ / T $ / T $ /16-24 ROTATABLE, (8) TAPPED HOLES R-T $ / R-T $ / R-T $ / R-T $ / OD CONFLAT FLANGE - HARDWARE AND SEALS 450-BK $11 (8) BOLT, NUT & WASHER KIT 450-PN $6 (4) PLATE NUTS 450-PNK $17 (4) PLATE NUTS, (8) BOLTS & WASHERS 450-BK-12 $16 (8) 12-PT BOLT, NUT & WASHER KIT 450-PNK-12 $24 (4) PLATE NUT, (8) 12-PT BOLT/WASHER 450-BT $6 (8) BOLTS & WASHER KIT 450-BT12 $16 (8) 12-PT BOLTS & WASHER KIT 450-VG $12 (1) VITON GASKET 450-VG-5 $49 (5) VITON GASKETS 450-CG $34 (10) COPPER GASKETS 12-PT-WRN $12 12-POINT WRENCH 450-PC $1 PLASTIC CAP Leybold PhoeniXL 300 HELIUM LEAK DETECTOR Leak rate: 5x10-12 to 10-1 mbar l/s Detects masses 2, 3 and 4 < 2 Minute Startup Auto ranging Auto internal zero and external zero function Internal calibrated leak NW25 Inlet Weighs only 80 lbs. Thru Hole CF Tapped Hole CF All 4.50 OD CF PhoeniXL $23100 RENT IT- SEE PAGE 76 53

54 4.62 OD CONFLAT FLANGES 10-BOLT HOLES NON-ROTATABLE, (10) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ $ ROTATABLE, (10) THROUGH HOLES R $ R $ R $ NON-ROTATABLE, (10) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ / T $ /16-24 ROTATABLE, (10) TAPPED HOLES R-T $ / R-T $ / R-T $ / OD CONFLAT FLANGE HARDWARE AND SEALS 462-BK $13 (10) BOLT, NUT & WASHER KIT 462-BK-12 $20 (10) 12-PT BOLT, NUT & WASHER KIT 462-PN $9 (5) PLATE NUTS 462-PNK $23 (5) PLATE NUT, (10) BOLTS & WASHERS 462-PNK-12 $29 (5) PLATE NUT, (10) 12-PT BOLT/WASHER 462-BT $7 (10) BOLTS & WASHER KIT 462-BT12 $20 (10) 12-PT BOLTS/WASHER KIT 462-VG $15 (1) VITON GASKET 462-VG-5 $60 (5) VITON GASKETS 462-CG $44 (10) COPPER GASKETS 462-PC $2 PLASTIC CAP, RED SERIES Thru Hole CF Tapped Hole CF All 4.62 OD CF VISIT FOR THOUSANDS OF VACUUM ITEMS 54

55 6.00 OD CONFLAT FLANGES 16-BOLT HOLES NON-ROTATABLE, (16) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ ROTATABLE, (16) THROUGH HOLES R $ R $ NON-ROTATABLE, (16) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ /16-24 ROTATABLE, (16) TAPPED HOLES R-T $ / R-T $ / OD CONFLAT FLANGE - HARDWARE AND SEALS 600-BK $16 (16) BOLT, NUT & WASHER KIT 600-PN $12 (8) PLATE NUTS 600-PNK $28 (8) PLATE NUTS, (16) BOLTS & WASHERS 600-BK-12 $34 (16) 12-PT BOLT, NUT & WASHER KIT 600-PNK-12 $46 (8) PLATE NUT (16) 12-PT BOLT/WASHER 600-BT $11 (16) BOLTS & WASHER KIT 600-BT12 $33 (16) 12-PT BOLTS & WASHER KIT 600-VG $12 (1) VITON GASKET 600-VG-5 $49 (5) VITON GASKETS 600-CG $44 (10) COPPER GASKETS 600-PC $2 PLASTIC CAP, WHITE SERIES 6.75 OD CONFLAT FLANGES Thru Hole CF Tapped Hole CF All 6.00 OD CF 18-BOLT HOLES NON-ROTATABLE, (18) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ ROTATABLE, (18) THROUGH HOLES R $ R $ NON-ROTATABLE, (18) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ /16-24 ROTATABLE, (18) TAPPED HOLES R-T $ / R-T $ / OD CONFLAT FLANGE - HARDWARE AND SEALS 675-BK $19 (18) BOLTS, NUT & WASHER KIT 675-BK-12 $32 (18) 12-PT BOLT, NUT & WASHER KIT 675-BT $13 (18) BOLTS & WASHER KIT 675-BT12 $31 (18) 12-PT BOLTS & WASHER KIT 675-VG $17 (1) VITON GASKET 675-VG-5 $77 (5) VITON GASKETS 675-CG $54 (10) COPPER GASKETS Thru Hole CF Tapped Hole CF All 6.75 OD CF 55

56 8.00 OD CONFLAT FLANGES 20-BOLT HOLES NON-ROTATABLE, (20) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ ROTATABLE, (20) THROUGH HOLES R $ R $ NON-ROTATABLE, (20) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ /16-24 ROTATABLE, (20) TAPPED HOLES R-T $ / R-T $ /16-24 HARDWARE AND SEALS OD CONFLAT FLANGE 800-BK $23 (20) BOLT, NUT & WASHER KIT 800-PN $16 (10) PLATE NUTS 800-PNK $40 (10) PLATE NUTS, (20) BOLTS/WASHERS 800-BK-12 $35 (20) 12-PT BOLT, NUT & WASHER KIT 800-PNK-12 $52 (10) PLATE NUT, 12-PT BOLT/WASHERS 800-BT $22 (20) BOLTS & WASHER KIT 800-BT12 $34 (20) 12-PT BOLTS & WASHER KIT 800-VG $20 (1) VITON GASKET 800-VG-5 $80 (5) VITON GASKETS 800-CG $59 (10) COPPER GASKETS OD CONFLAT FLANGES 24-BOLT HOLES Thru Hole CF Tapped Hole CF All 8.00 OD CF NON-ROTATABLE, (24) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ ROTATABLE, (24) THROUGH HOLES R $ R $ NON-ROTATABLE, (24) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ /16-24 ROTATABLE, (24) TAPPED HOLES R-T $ / R-T $ /16-24 HARDWARE AND SEALS OD CONFLAT FLANGE 1000-BK $28 (24) BOLT, NUT & WASHER KIT 1000-PN $19 (12) PLATE NUTS 1000-PNK $48 (12) PLATE NUTS, (24) BOLTS/ WASHERS 1000-BK-12 $42 (24) 12-PT BOLT, NUT & WASHER KIT 1000-PNK-12 $61 (12) PLATE NUT, (24)12-PT BOLT/WASHER 1000-BT $26 (24) BOLTS & WASHER KIT 1000-BT12 $38 (24) 12-PT BOLTS & WASHER KIT 1000-VG $23 (1) VITON GASKET 1000-VG-5 $98 (5) VITON GASKETS 1000-CG $79 (10) COPPER GASKETS Thru Hole CF Tapped Hole CF All OD CF 56

57 12.00 OD CONFLAT FLANGES 32-BOLT HOLES NON-ROTATABLE, (32) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ ROTATABLE, (32) THROUGH HOLES R $ R $ NON-ROTATABLE, (32) TAPPED HOLES PART NUMBER PRICE A B C D E F THREAD T $ / T $ /16-24 HARDWARE AND SEALS OD CONFLAT FLANGE 1200-BK $48 (32) BOLT, NUT & WASHER KIT Thru Hole CF 1200-BT $35 (32) BOLTS & WASHER KIT Tapped Hole CF 1200-CG $38 (1) COPPER GASKET 1200-CG-10 $364 (10) COPPER GASKETS 1200-VG $38 (1) VITON GASKET All OD CF 1200-VG-5 $169 (5) VITON GASKETS OD CONFLAT FLANGES 30-BOLT HOLES NON-ROTATABLE, (30) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ $ HARDWARE AND SEALS OD CONFLAT FLANGE 1325-BK $42 BOLT, NUT & WASHER KIT Thru Hole CF 1325-BT $39 BOLTS & WASHER KIT Tapped Hole CF 1325-CG $55 (1) COPPER GASKET 1325-CG-5 $259 (5) COPPER GASKETS All OD CF 1325-VG $58 (1) VITON GASKET OD CONFLAT FLANGES 30-BOLT HOLES NON-ROTATABLE, (30) THROUGH HOLES PART NUMBER PRICE A B C D E F HOLE DIA $ $ ROTATABLE, (30) THROUGH HOLES R $ R $ HARDWARE AND SEALS OD CONFLAT FLANGE 1400-BK $45 (30) BOLT, NUT & WASHER KIT Thru Hole CF 1400-BT $40 (30) BOLTS & WASHER KIT Tapped Hole CF 1400-CG $62 (1) COPPER GASKET 1400-CG-5 $299 (5) COPPER GASKETS All OD CF 1400-VG $67 (1) VITON GASKET OD CONFLAT FLANGE - 36 BOLT HOLES HARDWARE AND SEALS 1650-BK $55 (36) BOLT, NUT & WASHER KIT Thru Hole CF 1650-BT $50 (36) BOLTS & WASHER KIT Tapped Hole CF 1650-CG $70 (1) COPPER GASKET 1650-VG $67 (1) VITON GASKET All OD CF 57

58 DOUBLE SIDED CONFLAT FLANGES SS Flange Part Number Each A B Hole Same size knife edge sealing surface on both sides NON-ROTATABLE CLEARANCE HOLES 1.33" 2.12" 2.75" 3.38" 4.50" 4.62" 6.00" 8.00" D $ D-.500 $ D $ D-.500 $ BKD $6 (6) Bolt, Nut & Washer Kit D $ D $ BKD $7 (4) Bolt, Nut & Washer Kit D $ D-.750 $ D-1.0 $ D $ D-.750 $ D-1.0 $ BKD $7 (6) Bolt, Nut & Washer Kit 275-BKD-.750 $8 (6) Bolt, Nut & Washer Kit D $ D $ BKD $11 (8) Bolt, Nut & Washer Kit D $ D $ BKD $13 (8) Bolt, Nut & Washer Kit D $ D $ BKD $15 (10) Bolt, Nut & Washer Kit D $ D $ BKD $19 (16) Bolt, Nut & Washer Kit D $ D $ BKD $28 (20) Bolt, Nut & Washer Kit FITS ALL SIZE CONFLAT FLANGES! FLANGE COPPER GASKETS COPPER GASKETS VITON GASKETS VITON GASKETS CF CG $14 10 Pack 133-VG $12 5 Pack CF CG $18 10 Pack 212-VG $22 5 Pack CF CG $16 10 Pack 275-VG $15 5 Pack CF CG $24 10 Pack 338-VG $11 Each CF CG $34 10 Pack 450-VG $12 Each CF CG $44 10 Pack 462-VG $15 Each CF CG $44 10 Pack 600-VG $12 Each CF CG $54 10 Pack 675-VG $17 Each CF CG $59 10 Pack 800-VG $20 Each CF CG $79 10 Pack 1000-VG $23 Each CF CG $38 Each 1200-VG $38 Each CF CG $55 Each 1325-VG $58 Each CF CG $62 Each 1400-VG $67 Each CF CG $57 Each 1450-VG $67 Each CF CG $70 Each 1650-VG $67 Each 58

59 CF 90 o CF 45 o ELBOWS STAINLESS STEEL PART NUMBER FLANGE OD TUBE OD A LIST SALE VACUUM ESSENTIALS E $90 $ E45-VE $ E $100 $ E45-VE $ E $120 $ E45-VE $ E $200 $ E45-VE $ E $250 $ E45-VE $ E $280 $ E45-VE $ E $390 $ E45-VE $418 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) CF 90 o ELBOWS STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS E90 CF $75 $ E90-VE $ E90 CF $90 $ E90-VE $ E90 CF $90 $ E90-VE $ E90 CF $180 $ E90-VE $ E90 CF $275 $ E90-VE $ E90 CF $330 $ E90-VE $ E90 CF $350 $ E90-VE $ E90 CF $595 $ E90-VE $633 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) MITRED ELBOWS STAINLESS STEEL PART NUMBER FLANGE OD TUBE OD A LIST SALE VACUUM ESSENTIALS E90M $75 $ E90M-VE $ E90M $85 $ E90M-VE $ E90M $90 $ E90M-VE $ E90M $185 $ E90M-VE $ E90M $280 $ E90M-VE $ E90M $325 $ E90M-VE $ E90M $400 $ E90M-VE $ E90M $475 $ E90M-VE $ E90M $570 $ E90M-VE $ E90M $1250 $ E90M-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) ZERO-LENGTH GLASS VIEWPORTS 133-VPA $130 VPA SERIES INCLUDES 1 GASKET ACG-133 Annealed gasket $4 212-VPA $135 ACG-212 Annealed gasket $5 275-VPA $142 ACG-275 Annealed gasket $5 338-VPA $162 ACG-338 Annealed gasket $6 450-VPA $273 ACG-450 Annealed gasket $7 462-VPA $298 ACG-462 Annealed gasket $7 600-VPA $409 ACG-600 Annealed gasket $8 800-VPA $637 ACG-800 Annealed gasket $10 Supplied with 1 annealed copper gasket 1000-VPA $785 ACG-1000 Annealed gasket $15 Kodial glass (alkali borosilicate 7056) Repeated bakeout cycles to 350 C (heating rate should not exceed 2-3 per minute) CF flanged viewports require a fully annealed copper gasket (one supplied with each CF viewport). CAUTION: All viewports are fragile and should be handled and mounted with extreme caution. Never scratch the viewing area a weakened viewport may implode (or explode under wrong conditions). 59

60 CF TEE STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS CFT CF $110 $ CFT-VE $ CFT CF $120 $ CFT-VE $ CFT 2.46 $125 $ CFT-VE $110 CF CFT-L 2.62 $145 $ CFT-L-VE $ CFT CF $245 $ CFT-VE $ CFT 3.38 $325 $ CFT-VE $320 CF CFT-L 4.12 $335 $ CFT-L-VE $ CFT CF $360 $ CFT-VE $ CFT CF $465 $ CFT-VE $ CFT CF $875 $ CFT-VE $ CFT CF $1675 $ CFT-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 4-WAY CROSS STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS X CF $140 $ X-VE $ X CF $160 $ X-VE $ X CF $190 $ X-VE $ X CF $400 $ X-VE $ X 3.38 $485 $ X-VE $427 CF X-L 4.12 $520 $ X-L-VE $ X CF $635 $ X-VE $ X 4.32 $760 $ X-VE $665 CF X-L 5.31 $760 $ X-L-VE $ X CF $1440 $ X-VE $ X CF $2415 $ X-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 5-WAY CROSS STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS X CF $240 $ X-VE $ X CF $270 $ X-VE $ X CF $290 $ X-VE $ X CF $665 $ X-VE $ X CF $790 $ X-VE $ X CF $1105 $ X-VE $ X CF $1250 $ X-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 6-WAY CROSS STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS X CF $345 $ X-VE $ X CF $355 $ X-VE $ X CF $370 $ X-VE $ X CF $730 $ X-VE $ X CF $960 $ X-VE $ X CF $1215 $ X-VE $ X CF $1440 $ X-VE $ Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 60

61 ADDITIONAL COMBINATIONS AVAILABLE ONLINE ADDITIONAL COMBINATIONS AVAILABLE ONLINE REDUCING TEE STAINLESS PART NUMBER FLANGE 1 & 2 FLANGE 3 CF OD CF OD A B LIST SALE 275x133-RDT CF $125 $106 CF x212-RDT CF $130 $ x133-RDT CF $285 $252 CF x275-RDT CF $290 $ x275-RDT CF $300 $265 CF x338-RDT CF $320 $ x338-RDT CF $450 $409 CF x450-RDT CF $475 $ x275-RDT CF $500 $ x338-RDT CF $525 $472 CF x450-RDT CF $575 $ x462-RDT CF $585 $530 REDUCING CROSS STAINLESS PART NUMBER FLANGE 1 & 2 FLANGE 3 & 4 CF OD CF OD A B LIST SALE 275x133-RDX CF $245 $183 CF x212-RDX CF $265 $ x133-RDX CF $345 $255 CF x275-RDX CF $385 $ x275-RDX CF $415 $316 CF x338-RDX CF $460 $ x338-RDX CF $600 $462 CF x450-RDX CF $600 $ x275-RDX CF $600 $ x338-RDX CF $625 $499 CF x450-RDX CF $675 $ x462-RDX CF $775 $638 CF 6-WAY CUBES STAINLESS STEEL PART NUMBER FLANGE SIZE A LIST SALE 133-CU CF $650 $ CU CF $1250 $479 ADDITIONAL SIZES AVAILABLE ONLINE LDS VACUUM FITTINGS AND FLANGES NW CROSSES PAGES ISO CROSSES PAGE 47 WELDABLE CROSSES PAGES

62 NW TO SWAGELOK ADAPTORS - SEE PAGE 33 CONFLAT FLANGE - SWAGELOK Swagelok is a registered trademark of Crawford Fitting Company VCO VCO is a registered trademark of Cajon Company ADAPTORS A TUBE OD PART NUMBER PRICE VACUUM ESSENTIALS CF 1.33 CF 2.12 CF 2.75 CF 3.38 CF 4.50 CF xSWG-25 $56 133xSWG-25-VE $ xSWG-38 $63 133xSWG-38-VE $ xSWG-50 $68 133xSWG-50-VE $ xSWG-25 $66 212xSWG-25-VE $ xSWG-38 $73 212xSWG-38-VE $ xSWG-50 $82 212xSWG-50-VE $ xSWG-75 $ xSWG-75-VE $ xSWG-25 $61 275xSWG-25-VE $ xSWG-38 $68 275xSWG-38-VE $ xSWG-50 $75 275xSWG-50-VE $ xSWG-75 $ xSWG-75-VE $ xSWG-100 $ xSWG-100-VE $ xSWG-25 $75 338xSWG-25-VE $ xSWG-38 $83 338xSWG-38-VE $ xSWG-50 $94 338xSWG-50-VE $ xSWG-75 $ xSWG-75-VE $ xSWG-100 $ xSWG-100-VE $ xSWG-25 $ xSWG-25-VE $ xSWG-38 $ xSWG-38-VE $ xSWG-50 $ xSWG-50-VE $ xSWG-75 $ xSWG-75-VE $ xSWG-100 $ xSWG-100-VE $ xSWG-25 $ xSWG-25-VE $ xSWG-38 $ xSWG-38-VE $ xSWG-50 $ xSWG-50-VE $ xSWG-75 $ xSWG-75-VE $ xSWG-100 $ xSWG-100-VE $251 1-Bolt, Nut & Washer Kit (BK) & 10-Copper Gaskets (CG) ADAPTORS - CONFLAT FLANGE A TUBE OD FEMALE VCO MALE VCO CF 1.33 CF 2.75 CF 4.50 CF x25VCO $66 133x25VCO-M $ x38VCO $78 133x38VCO-M $ x50VCO $89 133x50VCO-M $ x25VCO $71 275x25VCO-M $ x38VCO $82 275x38VCO-M $ x50VCO $93 275x50VCO-M $ x75VCO $ x75VCO-M $ x100VC0 $ x100VC0-M $ x25VCO $ x25VCO-M $ x38VCO $ x38VCO-M $ x50VC0 $ x50VC0-M $ x75VCO $ x75VCO-M $ x100VC0 $ x100VC0-M $ x25VCO $ x25VCO-M $ x38VCO $ x38VCO-M $ x50VC0 $ x50VC0-M $ x75VC0 $ x75VC0-M $ x100VC0 $ x100VC0-M $223 62

63 VCR ADAPTORS - CONFLAT FLANGE A TUBE OD FEMALE VCR MALE VCR VCR REFERENCE x25VCR $60 133x25VCR-M $60 GUIGE CF x38VCR $67 133x38VCR-M $ x50VCR $78 133x50VCR-M $78 1/8 = VCR x25VCR $64 275x25VCR-M $ x38VCR $70 275x38VCR-M $70 CF x50VCR $70 275x50VCR-M $70 1/4" = VCR x75VCR $ x75VCR-M $119 VCR FEMALE x100VCR $ x100VCR-M $ x25VCR $ x25VCR-M $114 3/8 = VCR x38VCR $ x38VCR-M $123 CF x50VCR $ x50VCR-M $ x75VCR $ x75VCR-M $158 1/2" = VCR x100VCR $ x100VCR-M $ x25VCR $ x25VCR-M $ x38VCR $ x38VCR-M $148 3/4" = VCR12 CF x50VCR $ x50VCR-M $ x75VCR $ x75VCR-M $193 VCR MALE x100VCR $ x100VCR-M $212 1 = VCR16 ZERO LENGTH REDUCERS STAINLESS STEEL Different size CF flanges on both sides. UHV Vacuum Rating: 1x10-13 torr (approx) Temperature range: -200 C to 450 C The maximum ID of the small flange limits the bore A Chart Reference : Large Flanges With Clearance Holes, Except where -T is referenced (highlighted in RED for easy find). B Chart Reference: Small Flanges With Blind Tapped Holes. PART NUMBER EACH A B C D PART NUMBER EACH A B C D 275x T1 $ T x T1 $ T x T2 $ T T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T2 $ T T x T2 $ T T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T2 $ T T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T x T1 $ T

64 HALF NIPPLES - FIXED, THRU HOLES STAINLESS PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS LF CF $38 $ LF-VE $ LF CF $40 $ LF-VE $ LF CF $42 $ LF-VE $ LF CF $81 $ LF-VE $ LF CF $120 $ LF-VE $ LF CF $150 $ LF-VE $ LF CF $160 $ LF-VE $ LF CF $175 $ LF-VE $ LF CF $300 $ LF-VE $308 FLANGE IS NON-ROTATABLE ONE FLANGE IS ROTATABLE LF CF $415 $ LF-VE $459 1-Bolt, Nut & Washer Kit (BK) & 10-Copper Gaskets (CG) FULL NIPPLES STAINLESS STEEL PART NUMBER FLANGE TUBE OD A LIST SALE VACUUM ESSENTIALS N CF $60 $ N-VE $ N CF $67 $ N-VE $ N CF $80 $ N-VE $ N CF $150 $ N-VE $ N 6.76 $215 $ N-VE $224 CF N-L 8.25 $225 $ NL-VE $ N CF $250 $ N-VE $ N 8.64 $280 $ N-VE $301 CF N-L $300 $ NL-VE $ N CF $435 $ N-VE $ N CF $505 $ N-VE $ N-L $530 $ NL-VE $ N CF $850 $ N-VE $920 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) BELLOWS STAINLESS STEEL PART NUMBER WALL LENGTH LIST SALE VACUUM ESSENTIALS 133x133-R-MH $124 $ MH4-VE $ x212-R-MH $136 $ MH4-VE $ x275-R-MH $135 $ MH4-VE $ x338-R-MH $265 $ MH4-VE $ x450-R-MH $400 $ MH6-VE $ x462-R-MH $500 $ MH7-VE $ x600-R-MH $725 $ MH6-VE $ x800-R-MH $1100 $ MH8-VE $749 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) NW TO CF REDUCERS PAGE 38 ISO REDUCERS PAGE 45 NW TO ISO REDUCERS PAGE 37 64

65 STRAIGHT REDUCING NIPPLES STAINLESS Alternate Combinations Available Contact LDS PART NUMBER FLANGE 1 FLANGE 2 CONFLAT TUBE OD CONFLAT TUBE OD A SALE 275x133-RN CF CF $60 338x275-RN CF CF $ x133-RN 0.75 CF $112 CF x275-RN 1.50 CF $ x275-RN 1.50 CF $170 CF x450-RN 2.50 CF $ x275-RN 1.50 CF $ x450-RN CF CF $ x600-RN 4.00 CF $ x275-RN 1.50 CF $ x450-RN 2.50 CF $575 CF x600-RN 4.00 CF $ x800-RN 6.00 CF $625 CONICAL REDUCING NIPPLES STAINLESS Alternate Combinations Available Contact LDS PART NUMBER FLANGE 1 FLANGE 2 CONFLAT TUBE OD CONFLAT TUBE OD A SALE 212x133-CR CF CF $ x133-CR CF $105 CF x212-CR CF $ x212-CR CF $100 CF x275-CR CF $ x275-CR CF $145 CF x338-CR CF $ x275-CR CF $ x338-CR CF CF $ x450-CR CF $ x338-CR CF $ x450-CR CF CF $ x462-CR CF $297 FLEXIBLE METAL HOSE STAINLESS STEEL 1.33" MINI CONFLAT FLANGE 0.75" HOSE ID SALE WALL LENGTH VACUUM ESSENTIALS 133x133-R-MH10-T $ MH10T-VE $ x133-R-MH20-T $ MH20T-VE $ x133-R-MH24-T $ MH24T-VE $ x133-R-MH30-T $ MH30T-VE $ " CONFLAT FLANGE 1.00" HOSE ID SALE WALL LENGTH VACUUM ESSENTIALS 212x212-R-MH10-T $ MH10T-VE $ x212-R-MH18-T $ MH18T-VE $ x212-R-MH24-T $ MH24T-VE $ " CONFLAT FLANGE 1.50" HOSE ID SALE WALL LENGTH VACUUM ESSENTIALS 275x275-R-MH10-T $ MH10T-VE $ x275-R-MH12-T $ MH12T-VE $147 ONE FLANGE IS ROTATABLE 275x275-R-MH18 $ MH18-VE $241 OTHER COMINATIONS AVAILABLE ONLINE 275x275-R-MH24-T $ MH24T-VE $182 2-Bolt, Nut & Washer Kits (BK) & 10-Copper Gaskets (CG) 65

66 CF TO QUICK COUPLING STAINLESS STEEL NUMBER PRICE A B C NUMBER PRICE A B C 133xQ06 $65 CF xQ50 $126 CF xQ12 $65 CF xQ75 $133 CF xQ18 $65 CF xQ100 $146 CF xQ25 $65 CF xQ112 $168 CF xQ31 $65 CF xQ125 $188 CF xQ38 $65 CF xQ150 $246 CF xQ50 $75 CF xQ200 $271 CF xQ62 $75 CF OD CONFLAT FLANGE 2.12 OD CONFLAT FLANGE 600xQ50 $159 CF xQ25 $79 CF xQ75 $165 CF xQ50 $84 CF xQ100 $179 CF xQ75 $84 CF xQ112 $198 CF OD CONFLAT FLANGE 600xQ125 $219 CF xQ06 $69 CF xQ150 $279 CF xQ12 $69 CF xQ200 $304 CF xQ18 $69 CF OD CONFLAT FLANGE 275xQ25 $69 CF xQ50 $219 CF xQ31 $69 CF xQ75 $227 CF xQ38 $69 CF xQ100 $239 CF xQ50 $69 CF xQ112 $242 CF xQ62 $69 CF xQ125 $279 CF xQ75 $69 CF xQ150 $339 CF xQ87 $69 CF xQ200 $364 CF xQ100 $69 CF xQ112 $90 CF xQ125 $90 CF xQ150 $90 CF OD CONFLAT FLANGE 338xQ50 $108 CF xQ75 $114 CF xQ100 $128 CF xQ112 $149 CF STAINLESS STEEL 338xQ125 $169 CF CAN BE USED WITH VACUUM GAUGES 338xQ150 $219 CF CONTACT LDS FOR OTHER CONFIGURATIONS ANTI-SEIZE STICK GREAT FOR CONFLAT FLANGES! Silver Grade 1600 F (870 C) LDS SALE: $20 Protects metal parts in high heat environments Reduces friction and wear to critical parts Texture ideal for both coarse and fine threads Exceptional lubrication properties 20 Gram Stick Prevents rust, corrosion, seizing and eases disassembly Copper Grade 1800 F (982 C) LDS SALE: $20 66

67 K & KM SERIES PLUG FIGURE 2 VACUUM COUPLINGS 1/16 TUBE OD 1/8 TUBE OD 3/16 TUBE OD 1/4 TUBE OD 5/16 TUBE OD 3/8 TUBE OD 1/2 TUBE OD 5/8 TUBE OD 3/4 TUBE OD 7/8 TUBE OD 1.00 TUBE OD 1-1/8 TUBE OD 1-1/4 TUBE OD 1-3/8 TUBE OD 1-1/2 TUBE OD 1-5/8 TUBE OD 2.00 TUBE OD P/N EACH WALL A B C D E S-06-K/KM $20 ONE SIZE S-06-P $21 PLUG, FIGURE S-12-K/KM $20 ONE SIZE S-12-P $21 PLUG, FIGURE S-18-K/KM $20 ONE SIZE S-18-P $21 PLUG, FIGURE S-25-K $20 THICK WALL S-25-KM $20 THIN WALL S-25-P $21 PLUG, FIGURE S-31-K/KM $22 ONE SIZE S-31-P $21 PLUG, FIGURE S-38-K $22 THICK WALL S-38-KM $22 THIN WALL S-38-P $21 PLUG, FIGURE S-50-K $25 THICK WALL S-50-KM $25 THIN WALL S-50-P $21 PLUG, FIGURE S-62-K $28 THICK WALL S-62-KM $28 THIN WALL S-62-P $24 PLUG, FIGURE S-75-K $30 THICK WALL S-75-KM $30 THIN WALL S-75-P $24 PLUG, FIGURE S-87-K $35 THICK WALL S-87-KM $35 THIN WALL S-87-P $24 PLUG, FIGURE S-100-K $40 THICK WALL S-100-KM $40 THIN WALL S-100-P $24 PLUG, FIGURE S-112-K $43 THICK WALL S-112-KM $43 THIN WALL S-112-P $32 PLUG, FIGURE S-125-K $60 THICK WALL S-125-KM $60 THIN WALL S-125-P $32 PLUG, FIGURE S-138-K $120 THICK WALL S-138-KM $120 THIN WALL S-138-P $32 PLUG, FIGURE S-150-K $90 THICK WALL S-150-KM $90 THIN WALL S-150-P $44 PLUG, FIGURE S-162-K $145 THICK WALL S-162-KM $145 THIN WALL S-162-P $44 PLUG, FIGURE S-200-K $155 THICK WALL S-200-KM $120 THIN WALL S-200-P $47 PLUG, FIGURE O Ring Groove Machined into Retainer Ring ID Dimension Allows for Tube Variations 67

68 CONICAL REDUCER WELD BODY S/S PART NUMBER A B C SALE PART NUMBER A B C SALE WF100x075-CR $18 WF300x150-CR 1.50 $47 WF150x075-CR 0.75 $18 WF300x200-CR $ WF150x100-CR 1.00 $18 WF300x250-CR 2.50 $57 WF200x100-CR 1.00 $23 WF400x200-CR 2.00 $ WF200x150-CR 1.50 $24 WF400x250-CR $63 WF250x150-CR 1.50 $34 WF400x300-CR 3.00 $ WF250x200-CR 2.00 $37 Contact LDS For Additional Sizes TEE CROSS WELD BODY S/S PART NUMBER TUBE OD A LIST SALE PART NUMBER TUBE OD A LIST SALE WF075-T 1.00 $30 $15 WF250-T 3.00 $65 $ WF075-T-L 1.85 $30 $15 WF250-T-L 3.75 $70 $59 WF100-T 1.80 $31 $15 WF300-T $65 $ WF100-T-L 1.88 $31 $15 WF400-T 3.88 $100 $ WF150-T 2.25 $30 $15 WF400-T-L 4.87 $110 $89 WF150-T-L $32 $26 WF600-T $360 $319 WF150-T-XL 2.41 $36 $29 WF800-T $475 $398 WF200-T 2.59 $35 $22 WF1000-T $1375 $ WF200-T-L 3.00 $35 $22 Contact LDS For Additional Sizes 4-WAY CROSS WELD BODY S/S PART NUMBER TUBE OD A LIST SALE PART NUMBER TUBE OD A LIST SALE WF075-X 1.00 $42 $34 WF250-X 3.00 $84 $ WF075-X-L 1.40 $42 $34 WF250-X-L 3.75 $160 $129 WF100-X 1.80 $44 $35 WF300-X $140 $ WF100-X-L 1.88 $46 $37 WF400-X 3.88 $195 $ WF150-X 2.25 $51 $41 WF400-X-L 4.87 $205 $ WF150-X-L 2.39 $78 $63 WF600-X $715 $470 WF200-X 2.56 $70 $57 WF800-X $1225 $ WF200-X-L 3.00 $70 $57 WF1000-X $1685 $1277 PART NUMBER 5-WAY CROSS TUBE OD A LIST SALE PART NUMBER 6-WAY CROSS TUBE OD A LIST SALE WF075-5X $215 $89 WF075-6X $215 $116 WF100-5X-L $305 $99 WF100-6X $220 $159 WF150-5X $305 $108 WF150-6X $250 $168 WF200-5X-L $385 $207 WF200-6X $490 $212 WF250-5X $510 $242 WF250-6X $510 $262 WF300-5X $620 $279 WF300-6X $735 $329 WF400-5X $705 $341 WF400-6X $875 $ STAINLESS STEEL TUBING - NO FLANGES NUMBER OD WALL POLISH FOOT NUMBER OD WALL POLISH FOOT 025-ST-R X $5 300-ST-R X $ ST-R X $5 400-ST-R X $ ST-R X $5 500-ST-R $ ST-R X $6 600-ST-R $ ST-R X $9 800-ST-R $ ST-R X $ ST-R $ ST-R X $ ST-R $ ST-R X $15 Cut Charge Per Cut Length 200-ST-R X $20 $10-1/4-3 OD 250-ST-R X $22 $25-4 OD and Larger 68

69 45 o ELBOW 45 o ELBOW WITH TANGENTS PART NUMBER TUBE OD 90 o ELBOW WITH TANGENTS PART NUMBER TUBE OD A B SALE A SALE PART NUMBER WF075-E $9 WF075-E45-T $17 WF100-E $11 WF100-E45-T $19 WF150-E $12 WF150-E45-T $21 WF200-E $14 WF200-E45-T $23 WF250-E $24 WF250-E45-T $29 WF300-E $27 WF300-E45-T $47 WF400-E $47 WF400-E45-T $57 90 o MITERED ELBOW 90 o ELBOW PART NUMBER REDUCING TEE TUBE OD 304 STAINLESS REDUCING RUN OD LEG OD A B CROSS WF100x075-RWT $ WF100x075-RWX $64 WF150x075-RWT $ WF150x075-RWX $ WF150x100-RWT $ WF150x100-RWX $72 WF200x075-RWT $ WF200x075-RWX $106 WF200x100-RWT $ WF200x100-RWX $98 WF200x150-RWT $ WF200x150-RWX $106 WF250x150-RWT $ WF250x150-RWX $ WF250x200-RWT $ WF250x200-RWX $149 WF300x150-RWT $ WF300x150-RWX $143 WF300x200-RWT $ WF300x200-RWX $143 WF300x250-RWT $ WF300x250-RWX $159 WF400x150-RWT $ WF400x150-RWX $174 WF400x200-RWT $ WF400x200-RWX $ WF400x250-RWT $ WF400x250-RWX $221 WF400x300-RWT $ WF400x300-RWX $232 A SALE PART NUMBER WF075-E90M $15 WF075-E $10 WF100-E90ML $16 WF100-E $8 WF150-E90M $29 WF150-E $13 WF200-E90ML $35 WF200-E $15 WF250-E90M $40 WF250-E $ WF300-E90M $74 WF250-E90-SL 5.75 $31 WF400-E90M $124 WF300-E $34 WF500-E90M $210 WF400-E $55 WF600-E90M $210 WF600-E $149 WF800-E90M $440 WF800-E $257 WF1000-E90M $960 WF1000-E $372 WF075-E90-T $23 WF100-E90-T $25 WF150-E90-T $26 WF150-E90-TL 4.97 $34 WF200-E90-T $36 WF200-E90-TL 5.36 $43 WF250-E90-T $46 WF300-E90-T $54 WF400-E90-T 8.31 $89 NW SERIES WF400-E90-T-SL 8.01 $89 PAGE MAKE YOUR OWN COMPONENTS TUBE OD TUBE OD A A ISO SERIES PAGE44 SALE SALE 69

70 MANUAL RIGHT ANGLE VALVES - TUBE ENDS VITON SEAL FLANGE OD A B C D PART NUMBER EACH MRV-075 $ MRV-100 $247 TUBE MRV-150 $264 END MRV-200 $ MRV-250 $ MRV-300 $688 COPPER SEAL FLANGE OD A B C D PART NUMBER EACH MRVC-075 $ MRVC-100 $297 TUBE MRVC-150 $319 END MRVC-200 $ MRVC-250 $517 MANUAL RIGHT ANGLE VALVES - NW & ISO FLANGES VITON SEAL FLANGE OD A B C D VACUUM ESSENTIAL PART NUMBER EACH NW MRV-NW16-VE $256 MRV-0752-NWB $240 NW MRV-NW25-VE $264 MRV-1002-NWB $246 NW MRV-NW40-VE $290 MRV-1502-NWB $270 NW MRV-NW50-VE $372 MRV-2002-NWB $350 ISO MRV-ISO63-VE $663 MRV-2502-ISO $589 ISO MRV-ISO80-VE $879 MRV-3002-ISO $805 2-SS/Viton Centering Rings and Clamps VALVE ONLY PRICE MANUAL RIGHT ANGLE VALVES - CONFLAT FLANGED VITON SEAL COPPER SEAL PORT OD A B C D VACUUM ESSENTIAL PART NUMBER EACH 1.33 CF MRV-133V-VE $279 MRV-0752-CF $ CF MRV-212V-VE $302 MRV-1002-CF $ CF MRV-275V-VE $333 MRV-1502-CF $ CF MRV-338V-VE $493 MRV-2002-CF $ CF MRV-450V-VE $672 MRV-2502-CF $ CF MRV-462V-VE $761 MRV-3002-CF $696 PORT OD A B C D VACUUM ESSENTIAL PART NUMBER EACH 1.33 CF MRV-133C-VE $343 MRVC-0752-CF $ CF MRV-212C-VE $381 MRVC-1002-CF $ CF MRV-275C-VE $407 MRVC-1502-CF $ CF MRV-338C-VE $547 MRVC-2002-CF $ CF MRV-450C-VE $750 MRVC-2502-CF $698 2-Bolt Kits &10-Copper Gaskets VALVE ONLY PRICE BAKEABLE ALL METAL VALVES - CONFLAT COPPER SEAL PORT OD A B C D VACUUM ESSENTIAL PART NUMBER EACH 1.33 CF UHV-133-VE $649 UHV-0752-CF $ CF UHV-275-VE $681 UHV-1502-CF $659 2-Bolt Kits &10-Copper Gaskets VALVE ONLY PRICE Materials Operating temperature: -250 C to 400 C Pulled port body: 304 stainless steel Maximum bakeout temperature Bellows: Formed 321 stainless steel Open: 400 C Poppet seal: OFHC Copper Closed: 300 C Actuation: Manual using self-lubricating Vacuum rated: 1x10-10 Torr - UHV bronze nuts with ACME threads Helium leak rated: std. cc/second or less 70

71 AIR TO OPEN SPRING TO CLOSE PNEUMATIC RIGHT ANGLE VALVES - TUBE ENDS VITON SEAL PORT OD A B C PART NUMBER EACH PRV-075 $252 TUBE PRV-100 $279 END PRV-150 $ PRV-200 $409 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC RIGHT ANGLE VALVES - NW & ISO VITON SEAL VITON SEAL PORT OD A B C VACUUM ESSENTIALS PART NUMBER EACH NW PRV-NW16-VE $281 PRV-0752-NWB $265 NW PRV-NW25-VE $317 PRV-1002-NWB $299 NW PRV-NW40-VE $425 PRV-1502-NWB $325 NW PRV-NW50-VE $442 PRV-2002-NWB $420 2 Wing Clamps (CW) & 2 SS/Viton Centering Rings (SRV) VALVE ONLY PRICE PORT OD A B C VACUUM ESSENTIALS PART NUMBER EACH ISO PRV-ISO63-VE $714 PRV-2502-ISO $640 ISO PRV-ISO80-VE $964 PRV-3002-ISO $890 ISO PRV-ISO100-VE $964 PRV-4002-ISO $890 6 Double Claw Clamps (DC) & 2 SS/Viton Centering Rings (SRV) VALVE ONLY PRICE PNEUMATIC RIGHT ANGLE VALVES - CONFLAT FLANGE VITON SEAL PORT OD A B C VACUUM ESSENTIALS PART NUMBER EACH 1.33 CF PRV-133V-VE $279 PRV-0752-CF $ CF PRV-212V-VE $373 PRV-1002-CF $ CF PRV-275V-VE $373 PRV-1502-CF $ CF PRV-338V-VE $554 PRV-2002-CF $514 AIR TO OPEN, SPRING TO CLOSE 2-Bolt Kits &10-Copper Gaskets VALVE ONLY PRICE PNEUMATIC RIGHT ANGLE VALVES - INDUSTRIAL STRENGTH Normally Closed, pressurize to open, spring seal Aluminum Body Service Life: 2 Million Cycles Magnetic Piston XLAV Series 24VDC Solenoid (XLAV Series) Light and surge suppressor Operating Temperature: XLA: 5 TO 60 o C XLAV: 5 TO 50 o C Operating Pressure: 760 to 7.5x10-9 Torr Air Operated *Leakage: Normally Closed Internal: 10-9 Torr l/s External: Torr l/s *At ordinary temperatures, excluding gas permeation PORT DESCRIPTION PART NUMBER EACH NW16 Without Solenoid Valve XLA-16-M9 $342 With Solenoid Valve XLAV-16-M9-5L $403 NW25 Without Solenoid Valve XLA-25-M9 $371 With Solenoid Valve XLAV-25-M9-5L $432 NW40 Without Solenoid Valve XLA-40-M9 $411 With Solenoid Valve XLAV-40-M9-5L $472 NW50 Without Solenoid Valve XLA-50-M9 $630 With Solenoid Valve XLAV-50-M9-5L $691 ISO63 Without Solenoid Valve XLA-63-M9 $834 With Solenoid Valve XLAV-63-M9-5L $895 ISO80 Without Solenoid Valve XLA-80-M9 $1121 With Solenoid Valve XLAV-80-M9-5L $1181 Without Solenoid Valve XLA-100-M9 $2369 ISO100 With Solenoid Valve XLAV-100-M9-5L POR Additional Information And Drawings Available Online 71

72 VITON SEAL MANUAL INLINE VALVES - NO FLANGE PART NUMBER FLANGE OD A B C D E F SALE MIV-075 TUBE $283 MIV-100 TUBE $292 MIV-150 TUBE $320 MIV-200 TUBE $427 COPPER SEAL VITON SEAL VITON SEAL PART NUMBER FLANGE OD A B C D E F SALE MIVC-075 TUBE $324 MIVC-100 TUBE $328 MIVC-150 TUBE $373 MIVC-200 TUBE $479 MANUAL INLINE VALVES - NW FLANGE PART NUMBER FLANGE OD A B C D E F SALE MIV-0752-NWB NW $297 MIV-1002-NWB NW $309 MIV-1502-NWB NW $342 MIV-2002-NWB NW $484 MANUAL INLINE VALVES - CONFLAT FLANGE PART NUMBER FLANGE OD A B C D E F SALE MIV-0752-CF 1.33 CF $310 MIV-1002-CF 2.12 CF $369 MIV-1502-CF 2.75 CF $381 MIV-2002-CF 3.38 CF $522 VITON SEAL VITON SEAL VITON SEAL COPPER SEAL PART NUMBER FLANGE OD A B C D E F SALE MIVC-0752-CF 1.33 CF $384 MIVC-1002-CF 2.12 CF $424 MIVC-1502-CF 2.75 CF $468 MIVC-2002-CF 3.38 CF $576 PNEUMATIC INLINE - NO FLANGE PART NUMBER FLANGE OD A B C D E LIST SALE PIV-075 TUBE $330 $297 PIV-100 TUBE $410 $333 PIV-150 TUBE $435 $339 PIV-200 TUBE $600 $477 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC INLINE - NW FLANGE PART NUMBER FLANGE OD A B C D E LIST SALE PIV-0752-NWB NW $355 $309 PIV-1002-NWB NW $425 $351 PIV-1502-NWB NW $455 $391 PIV-2002-NWB NW $620 $508 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC INLINE - CONFLAT FLANGE PART NUMBER FLANGE OD A B C D E LIST SALE PIV-0752-CF 1.33 CF $365 $324 PIV-1002-CF 2.12 CF $470 $394 PIV-1502-CF 2.75 CF $495 $418 PIV-2002-CF 3.38 CF $695 $634 AIR TO OPEN, SPRING TO CLOSE 72

73 VITON SEAL MANUAL ANGLE INLINE - NO FLANGES PART NUMBER FLANGE OD A B C D SALE MAIV-075 TUBE $328 MAIV-100 TUBE $346 MAIV-150 TUBE $378 MAIV-200 TUBE $526 VITON SEAL VITON SEAL VITON SEAL COPPER SEAL VITON SEAL VITON SEAL COPPER SEAL PART NUMBER FLANGE OD A B C D SALE MAIVC-075 TUBE $369 MAIVC-100 TUBE $433 MAIVC-150 TUBE $442 MAIVC-200 TUBE $561 MANUAL ANGLE INLINE - NW FLANGES PART NUMBER FLANGE OD A B C D SALE MAIV-0752-NWB NW $342 MAIV-1002-NWB NW $364 MAIV-1502-NWB NW $400 MAIV-2002-NWB NW $562 MANUAL ANGLE INLINE - CONFLAT FLANGE PART NUMBER FLANGE OD A B C D SALE MAIV-0752-CF 1.33 CF $360 MAIV-1002-CF 2.12 CF $387 MAIV-1502-CF 2.75 CF $427 MAIV-2002-CF 3.38 CF $621 PART NUMBER FLANGE OD A B C D SALE MAIVC-0752-CF 1.33 CF $400 MAIVC-1002-CF 2.12 CF $477 MAIVC-1502-CF 2.75 CF $481 MAIVC-2002-CF 3.38 CF $634 PNEUMATIC ANGLE INLINE - NO FLANGES PART NUMBER FLANGE OD A B C LIST SALE PAIV-075 TUBE $395 $342 PAIV-100 TUBE $430 $387 PAIV-150 TUBE $475 $427 PAIV-200 TUBE $640 $576 PAIV-250 TUBE $845 $759 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC ANGLE INLINE - NW FLANGES PART NUMBER FLANGE OD A B C LIST SALE PAIV-0752-NWB NW $415 $354 PAIV-1002-NWB NW $450 $405 PAIV-1502-NWB NW $500 $449 PAIV-2002-NWB NW $680 $612 PAIV-2502-ISO ISO $945 $880 AIR TO OPEN, SPRING TO CLOSE PNEUMATIC ANGLE INLINE - CONFLAT PART NUMBER FLANGE OD A B C LIST SALE PAIV-0752-CF 1.33 CF $425 $332 PAIV-1002-CF 2.12 CF $475 $405 PAIV-1502-CF 2.75 CF $495 $427 PAIV-2002-CF 3.38 CF $745 $678 PAIV-2502-CF 4.50 CF $995 $894 AIR TO OPEN, SPRING TO CLOSE 73

74 MANUAL BALL VALVES - NW PORTS PART NUMBER PORT A B C D E LIST SALE VACUUM ESSENTIALS LDS-KMBV-1075-NW16 NW $275 $190 KMBV-NW16-VE $200 LDS-KMBV-1100-NW25 NW $590 $279 KMBV-NW25-VE $289 LDS-KMBV-1150-NW40 NW $685 $341 KMBV-NW40-VE $351 LDS-KMBV-1200-NW50 NW $800 $399 KMBV-NW50-VE $409 2 Wing Clamps (CW) & 2 SS/Viton Centering Rings (SRV) MANUAL BALL VALVES - TUBE END PORTS PART NUMBER PORT A B C D E LIST SALE BUY ONE GET ONE FREE LDS-KMBV-1075-TE $240 $150 KMBV-1075-TE $150 LDS-KMBV-1100-TE $360 $205 KMBV-1100-TE $205 LDS-KMBV-1150-TE $600 $300 KMBV-1150-TE $300 LDS-KMBV-1200-TE $745 $350 KMBV-1200-TE $350 TUBE END BALL VALVES ARE BUY ONE GET ONE FREE! KMBV SERIES BALL VALVE - SEAL KITS PART NUMBER BALL VALVE SIZE Kit Description LIST SALE LDS-KMBV-NW16-SKT 0.75 Seal Kit $59 $20 NW16 LDS-KMBV-NW16-RKT Tube End Repair Kit With Ball $97 $30 LDS-KMBV-NW25-SKT 1.00 Seal Kit $59 $25 NW25 LDS-KMBV-NW25-RKT Tube End Repair Kit With Ball $97 $35 LDS-KMBV-NW40-SKT 1.50 Seal Kit $59 $35 NW40 LDS-KMBV-NW40-RKT Tube End Repair Kit With Ball $97 $45 LDS-KMBV-NW50-SKT 2.00 Seal Kit $59 $35 NW50 LDS-KMBV-NW50-RKT Tube End Repair Kit With Ball $97 $50 KMBV SERIES 316 Forged Stainless Viton stem seal Teflon ball seal 316 stainless ball Large conductance Rated for vacuum 1x10-9 cc/second (helium) DON T WANT TO O REBUILD YOUR VALV ALVE? CONTACT LDS AND WE WILL DO IT FOR YOU! $50 + KIT Pneumatic Ball Valves Available 74

75 THIN FILM SUPPLIES 5 MHz Crystal Discs Balzers, Umicore and Unaxis MATERIAL ADHESION LAYER PACK OF 10 PACK OF 30 Aluminum Alloy None TFS-01BA-10 $69 TFS-01BA-30 $195 Silver Chromium TFS-01BS-10 $69 TFS-01BS-30 $195 Gold Chromium TFS-01BG-10 $69 TFS-01BG-30 $195 AT cut, diameter, plano/convex replacement QCM sensor 5 MHz Crystal Discs Sloan/Ulvac MATERIAL ADHESION LAYER PACK OF 10 PACK OF 30 Gold Chromium TFS-01SG-10 $69 TFS-01SG-30 $195 Silver Chromium TFS-01SS-10 $69 TFS-01SS-30 $195 Aluminum Alloy None TFS-01SA-10 $69 TFS-01SA-30 $195 AT cut, 0.490" diameter, plano/convex replacement QCM sensor 6 MHz Crystal Discs Inficon, Maxtek, Sycon, Edwards and Intellimetrics AT cut, diameter, plano/convex replacement QCM sensor MATERIAL ADHESION LAYER PACK OF 10 PACK OF 30 Gold Chromium TFS-010G-10 $69 TFS-010G-30 $195 Silver Chromium TFS-001S-10 $69 TFS-001S-30 $195 Aluminum Alloy None TFS-003A-10 $69 TFS-003A-30 $195 COST-SAVINGS OPTION Electronically stable, long lasting and reliable, but minor cosmetic defects MATERIAL ADHESION LAYER PACK OF 10 PACK OF 30 Gold Chromium TFS-010G-2-10 $58 TFS-010G-2-30 $159 Aluminum Alloy None TFS-003A-2-10 $58 TFS-003A-2-30 $159 Foil (Aluminum) - Ultra-High Vacuum LENGTH THICKNESS WIDTH WEIGHT PART NUMBER PRICE 500 linear feet OVERALL DIMENSION " lbs. TFS-ASC-1518F $ " lbs. TFS-ASC-3024F $392 THROUGH L x W x D Greaseless and ready for vacuum use Boat Sources Molybdenum (.015") Purity 99.9%-99.99% Tantalum (0.005") 2.5 x x 0.26 x 0.26 TFS-ASC-BS10-M $11 TFS-ASC-BS10-T $ x x 0.50 x 0.50 TFS-ASC-BS15-M $21 TFS-ASC-BS15-T $ x x 0.70 x 0.50 TFS-ASC-BS20-M $38 TFS-ASC-BS20-T $58 Absorbent Wipes - Lint Free PACK OF 100 WIPES TFS-ASC-LFT100 $39 PACK OF 250 WIPES TFS-ASC-LFT250 $74 More Online! PACK OF 500 WIPES TFS-ASC-LFT500 $124 Filament Posts Evaporation Compounds Boat Sources Tungsten Rods Teflon Wafer Carriers Teflon Wafer Baskets Chimney Evaporation Sources 75

76 SHORT TERM LEAK DETECTOR RENTALS PhoeniXL 300 Alcatel ASM142 Alcatel ASM182TD+ Supplied With Weekly: $575 Weekly: $575 Weekly: $700 Leak Detector Monthly: $2000 Monthly: $2000 Monthly: $2400 Rental Auto Calibration Internal Calibrated Leak A $125 clean-up fee applies to all rentals (except Gas Check). Standard Features ASM142, ASM182TD+ and PhoeniXL Startup within 3 minutes or less Sniffer probe included Pump Stands Weekly: $575 Monthly: $2000 Model Sensitivity Pumping Capacity Inlet Weight Alcatel ASM142 1x m 3 /h (6 cfm) NW lbs. Helium background suppression with floating zero Talking leak detector, Speaks 4 languages Model Sensitivity Pumping Capacity Inlet Weight Alcatel ASM182TD+ 5x10-12 to 10-1 mbar l/s 25 m 3 /h (15 cfm) NW lbs. DRY Leak Detector - No oil pumps Discrete IO and RS-232 Talking leak detector, Speaks 4 languages Model Sensitivity Pumping Capacity Inlet Weight Leybold PhoeniXL 300 5x10-12 to 10-1 mbar l/s 3 m 3 /h (3 cfm) NW25 80 lbs. Detects helium masses 2, 3 and 4 Light weight PURCHASE THIS UNIT, SEE PAGE 53 LOW COST Light Weight SEARCH & LOCATE Leak Detector For Sniffing Applications... Helium Sensitivity: 2x10-5 cc/second NIST Traceable Multiple Gas Selection Auto-Range/Zero Detector: Micro volume thermal conductivity cell Accuracy: +/-5% Displayed reading - One digit Temperature: -20 o C to 60 o C Flow Rate: 2 cc/min Response: 1 second with 1 second clear downtime Dimensions: L = 15 x W = 2.5 x D = 2 Batteries supplied: 4 AA Battery Life: 40 hours (typical unit) FREE Storage Case Weighs Only 1.1 Lbs. Also available with sniffer style calibrated leaks Rent Me $190 In Stock Ar CH 4 He R12 2x10-4 cc/sec 1x10-4 cc/sec 2x10-5 cc/sec 1x10-4 cc/sec 76

77 ALCATEL (adixen) VACUUM PRODUCTS Parts and Services FILAMENTS ELECTRON COLLECTOR DOUBLE ELECTRON COLLECTOR SINGLE ELASTOMER SEAL ALCATEL EQUIVALENT ALC $157 ALC $22 ALC $20 LDS $50 EXCHANGE Send Used Filaments 2-Filament & 1-Double Collector Kit Filament & Single Collector Kit LDS R $99 LDS DKIT $324 LDS KIT $171 List: $251 Save 80% By Using LDS Brand ANALYZER CELL EXCHANGES FROM STOCK ALC $130 ALC $75 ALC $105 ALC $192 ALC $342 ALC $120 MORE LEAK DETECTOR ALC $105 ALC $214 ALC $342 ALC $120 VALVES ONLINE ALC $105 ALC $174 ALCATELPARTS.COM ALC $191 ALC $194 ALC $405 ALC $370 ALC $522 SOLID Switch Cover SOLID Switch Assembly OIL MIST ELIMINATOR ALC-SCO-S $4 ALC-SCA-S $14 ALC $131 LED Hole Switch Cover LED Switch Assembly 5-PACK FILTERS GAS LEAKS ALC-SCO-LED $4 ALC-SCA-LED $19 ALC $50 SEE MDP & TURBOPUMP BEARING CHANGES! LDS HAS HARD TO FIND SPARE PARTS FOR OLDER UNITS SHOP ONLINE BY ALCATEL/ADIXEN PART NUMBER 77

78 LEAK TESTING LET LDS DO THE WORK FOR YOU! VACUUMUNIVERSITY.COM Also open To Non-Profit & US Government Facilities ON-SITE LEAK TESTING Man and Machine or using your equipment IN-HOUSE LEAK TESTING SEND LDS YOUR PRODUCTS Includes part leak test certification No project too large or too small $95 per hour - 2 Hour Minimum Estimates given BEFORE work begins LDS can even make your leak test fixture CHECK OUR WEBSITE FOR UNIVERSITY EXCLUSIVE DEALS PROFESSOR PACKS OUT THE DOOR SPECIALS LDS MANUFACTURES CUSTOM FLANGES, CHAMBERS & MANIFOLDS ATTENTION ALL CUSTOMERS: ANY PURCHASE (regardless of size) with a FINAL DESTINATION outside the United States must be disclosed. International Emergency Economic Powers Act PROHIBITS the export of vacuum technology to certain individuals and countries. LOW PRICES and FAST TURNAROUND SEND US YOUR SPECIFICATIONS! First time offenders of non-compliance with US Export Laws can result in personal and company fines of $50,000 and (10) years in Federal prison. LDS VACUUM TRIVIA... LDS WAS ESTABLISHED IN WE ARE A 100% WOMAN OWNED COMPANY. LDS HAS VACATION SHUTDOWNS TWICE A YEAR (JULY & DECEMBER): DECEMBER SHUTDOWN: December 23 (12:00 PM) Through January 2, 2011 JULY SHUTDOWN: July 4 Through July 10,

79 ADAPTORS - CONFLAT FLANGES GASKETS SWAGELOK FLANGE TO FITTING Conflat Dimensional Info 48 CF - Copper 58 Swagelok - CF 62 Adaptive Ring " Flanges and Hardware 49 CF - Viton 58 Swagelok - NW 33 Adaptive Tee - NPT " Flanges and Hardware 50 ISO - O-Rings 42 TEES Hose Adaptor " Flanges and Hardware 51 NW - O-Rings 22 Adaptive (NPT) 30 NPT, Female - NW " Flanges and Hardware 52 GAUGES CF 60 NPT, Male - NW " Flanges and Hardware 53 Calibration Service 17 ISO 46 Quick Coupling - CF " Flanges and Hardware 54 Compound 12 NW 27 Quick Coupling - ISO " Flanges and Hardware 55 Convectron Style 13 Weld Body 68 Quick Coupling - NW " Flanges and Hardware 55 Ion Gauge, Glass (all) 15 TEES, REDUCING Rotatable Bolt Ring - ISO " Flanges and Hardware 56 Ion Gauge, Nude 14 CF to CF 61 Swagelok - CF " Flanges and Hardware 56 Thermocouple 13 CF to NW 27 Swagelok - NW " Flanges and Hardware 57 A2LA Scope of Accreditation 16 ISO to ISO 47 Test Port - NW " Flanges and Hardware 57 HOSE AND TUBING ISO to NW 27 VCO - CF " Flanges and Hardware 57 Adaptors, NW 34 NW to NW 27 VCO - NW " Flanges and Hardware 57 Clamps 34 Weld Bodies 69 VCR - CF 63 DOUBLE SIDED TRAPS Flexible Metal - CF VCR - NW 32 CROSSES 65 Coaxial 6 Welch Pump To NW 3 4-WAY, 5-WAY, 6-WAY Flexible Metal - ISO 45 Molecular Sieve 6 ADAPTORS - CF 60 Flexible Metal - NW 36 Oil Mist Eliminators 6 FLANGE TO FLANGE ISO 47 Flexible Metal - Reducing 36 VALVES Reducers - CF to CF 65 NW 28 PVC - Wire Reinforced 34 Bakeable 70 Reducers - CF to ISO 45 Weld Bodies 68 Tubing, 304 S/S 68 Ball 74 Reducers - CF to NW 38 CROSSES, REDUCING LUBRICANTS, SEALANTS Gate 74 Reducers - CF Zero Length 63 CF to CF 61 Anti-Seize 66 Industrial 71 Reducers - ISO to ISO 45 CF to NW 29 Krytox Equivalent 4 Inline 72 Reducers - ISO to NW 37 ISO to ISO 47 Sealant, High Vacuum 4 Inline, Angle 73 Reducers - NW to NW 37 ISO to NW 29 Silicone Grease, High Vacuum 4 Right Angle 70 BLANKS NW to NW 28 TorrSeal Equivalent 4 VARIAN (Equivalent Products) Conflat - See CF Section Weld Bodies 69 LEAK DETECTOR Gas Leaks - Diffusion 18 ISO, Bolted Style 41 CUBES 61 Alcatel (Adixen), Spares 77 Gas Leaks - Adjustable 19 ISO, Claw Clamp Style 43 ELBOWS Gas Check - Hand Held 76 Ion Gauges, Glass 15 NW 24 Conflat Ion Gauges, Nude 14 Gas Leaks CALIBRATION SERVICES ISO TorrSeal Equivalent 4 A2LA Scope 16 NW 26 Oerlikon LEYBOLD 53 VCO Gas Leaks & Gauges 17 Reducing 26 Rentals 76 CF 62 CLAMPS Weld Bodies 69 Spray Probe, Helium Tank 28 NW 33 Hose 34 FEEDTHROUGHS Test Port Adaptor 38 VCR ISO 43 Baseplate, Blank Plug 8 MASS FLOW CONTROLLERS 11 CF 63 NW 21 Baseplate, Blank Plug 9 NIPPLES Glands 32 CENTERING RINGS Custom, Electrical 10 Conflat 64 Nuts 32 ISO63/80/100/ Glovebox 10 ISO, Bolted 41 NW 32 ISO200/250/ Single & Dual Tube 9 ISO, Claw Clamp 44 WELCH ISO400/ Temperature, High 10 NW 35 Kits 3 NW - All Sizes 22 Thermocouple 10 NIPPLES, REDUCING Pump Adaptors 3 ADAPTIVE CENTERING RINGS USB, Video 10 CF to CF 65 WELD BODIES NW - All Sizes 23 Microdot/BNC Series CF to ISO 45 Conical Reducers 68 Centering & Overpressure Ring 23 Feedthroughs CF to NW Crosses Overpressure Ring 23 Flange 8 ISO to ISO SCREENED CENTERING RINGS Fluid Tube 9 ISO to NW 37 Elbows 67 ISO63/80/100/ Fluid & Air Tube 9 NW to NW 37 Quick Disconnect, Tube 67 NW - All Sizes 23 Quick Coupling 8 O-RINGS - See Gaskets 68 Tees CONICAL REDUCERS Fluids - Oil 5 OVERPRESSURE RINGS CF to CF 65 GAS LEAKS PLASTIC CAPS WELD FLANGES CF to ISO 45 Diffusion Style 18 CF 50 ISO, Bolted 41 CF to NW 38 Capillary Style 19 ISO 40 ISO, Claw Clamp 44 ISO to ISO 45 Calibration & Repair Service 17 NW NW ISO to NW 37 A2LA Scope of Accreditation 16 PUMPS 25 NW to NW 37 Kits - Leybold 2 PAGES WORTH REMEMBERING Weld Bodies 68 Kits - Varian 3 A2LA Scope of Accreditation 16 COUPLINGS Kits - Welch 3 Conflat Flange Information 48 Quick Disconnect, CF 66 Mechanical - New (Leybold) 2 Gauges, Typical Pressures 11 Quick Disconnect, ISO 47 Mechanical - New (Edwards) 35 ISO Dimensional Information 40 Quick Disconnect, NW 39 Oil Mist Eliminators 6 NW Dimensional Information 20 Quick Disconnect, Tube 67 Pumping Station 7 Vacuum Pressure Chart 14 Plugs 67 Welch Adaptors 3 79

80 PAGE PAGE 11 PAGE 14 PAGE 63 PAGE 45 VACUUM ESSENTIALS COMBINING PRODUCTS TO SAVE EVEN MORE PAGE 13 PAGE 70 PAGES PAGE 30 PAGE 21 PAGE 43 PAGE 59 PAGE 62 PAGE 33 PAGE 42 PAGE 69 PAGE 23 LDS VACUUM PRODUCTS, INC. 773 Big Tree Drive Longwood, FL PRSRT STD U.S. POSTAGE PAID ORLANDO, FL PERMIT NO 618 PAGE 15 PAGES BIG TREE DRIVE, LONGWOOD, FLORIDA PHONE: (407) FAX: (407)