Accurate to 0.1 NIST Traceable Advanced PID Algorithm USB Port Free datalogging/control software

Size: px

Start display at page:

Download "Accurate to 0.1 NIST Traceable Advanced PID Algorithm USB Port Free datalogging/control software"

Bridget Mosley
6 years ago
Views:

1 Accurate to 0.1 NIST Traceable Advanced PID Algorithm USB Port Free datalogging/control software CONTROLLERS Serving the laboratory glassware industry for over 75 years

State-of-the-Art and Vacuum Controllers Ace Glass now offers the most advanced laboratory temperature controllers for virtually every application in your lab.

Units are available in four different thermocouple types and temperature ranges.

white = RTD. All controllers have free control software that provides 0.1º C regulation of any lab device or piece of equipment.

data-logging capabilities. 230V versions are CE marked.

2 State-of-the-Art and Vacuum Controllers Ace Glass now offers the most advanced laboratory temperature controllers for virtually every application in your lab. From a simple temperature monitor to a full research-grade Quad unit with four fully independent channels, ACE can provide the answer and the best value for your application. Units are available in four different thermocouple types and temperature ranges. Controllers may be purchased with or without thermocouples, and the probe receptacles on each unit are color coded to match the thermocouple types they accept: blue = T ; yellow = K ; Black = J ; and white = RTD. All controllers have free control software that provides 0.1º C regulation of any lab device or piece of equipment. Included in this brochure is a portion of our wide offering of thermocouple probes, and our latest models for vacuum and pressure control, which feature free control software that can also provide data-logging capabilities. 230V versions are CE marked. Economy Controllers Ultra Compact, Ace Economy Controller with J, T, or K thermocouple inputs; output power 120 volt/60 Hz, 15 amp maximum. Bench or bar mountable. 120 volt/60 Hz input. Single-loop time proportional output: 10 seconds cycle rate. Solid state relay control contact. Accuracy over range: 0.25% (max 2 C). Set-point control accuracy: ± 0.1 C. Microprocessor-based 1/32 DIN module, dual process and set-point value display. Auto tuned PID with fuzzy logic. Programmable: ramp and soak (16 segment). Size: 2"x 5¼"x 5¼" (HxWxD); 120vac, 15 amps, Weight: 2 lbs, 2 oz. No 0 to 800 J No 200 to 250 T No 50 to 1200 K Model 150, J-Kem An ideal controller for applications that don t require the precise regulation of 200 Series controllers. This compact unit features 1200 watts of power, sufficient for heating 5 L mantles, many ovens, and other devices. Ramp-to-Set Point feature standard. USB port and data logging and control software optional. 2.5" x 3.75" x 5.25" (HxWxD) / 120vac, 10 amps, 1200 watts 150-T No 200 to 250 T J No 0 to 800 J K No 50 to 1200 K T-S Yes 200 to 250 T J-S Yes 0 to 800 J K-S Yes 50 to 1200 K Model 150/Timer, J-Kem Same power and versatility as the Model 150, but with a 100-hour digital timer to turn heating ON or OFF at a user-specified time. 2.5" x 4.75" x 5.5" (HxWxD) / 120vac, 10 amps, 1200 watts 150/Timer-T No 200 to 250 T /Timer-J No 0 to 800 J /Timer-K No 50 to 1200 K /Timer-T-S Yes 200 to 250 T /Timer-J-S Yes 0 to 800 J /Timer-K-S Yes 50 to 1200 K

Single-Channel Controllers 12325 Model 210, J-Kem The Model 210 is our most compact research grade controller, yet packed with 1200 watts of power.

Power control computer provides 0.1 C regulation of anything. 3.25" x 5.25" x 7.25" (HxWxD) / 10 amps, 1200 watts.

Model 310, J-Kem 230V, CE-marked version of Model 210, above.

3 Single-Channel Controllers Model 210, J-Kem The Model 210 is our most compact research grade controller, yet packed with 1200 watts of power. Sufficient for heating mantles up to 5 L in size, and most laboratory ovens, hot plates, reaction blocks and other heaters. Comes complete with USB port and data logging and control software. Power control computer provides 0.1 C regulation of anything. 3.25" x 5.25" x 7.25" (HxWxD) / 10 amps, 1200 watts. 210-T No 200 to 250 T J No 0 to 800 J K No 50 to 1200 K T-S Yes 200 to 250 T J-S Yes 0 to 800 J K-S Yes 50 to 1200 K Model 310, J-Kem 230V, CE-marked version of Model 210, above. w/ Sensor Cord 310-T-S Yes 200 to 250 T J-S Yes 0 to 800 J K-S Yes 50 to 1200 K Model 210/Timer, J-Kem Same power and versatility as the Model 210, above, but also contains a 100-hour digital timer to turn heating OFF or ON at a user-specified time. A new safety feature automatically disconnects power from the heater following recovery from a power failure. Comes complete with USB port and data logging and control software. Power control computer provides 0.1 C regulation of anything. 3.5" x 6.75" x 6" (HxWxD) / 120vac, 10 amps, 1200 watts. 210/Timer-T No 200 to 250 T /Timer-J No 0 to 800 J /Timer-K No 50 to 1200 K /Timer-T-S Yes 200 to 250 T /Timer-J-S Yes 0 to 800 J /Timer-K-S Yes 50 to 1200 K Model 250, J-Kem The Model 250 has both heating and cooling outlets for maximum versatility. Two heating outlets supply 1800 watts of power for large equipment and heating mantles up to 22 L. The third outlet, also 1800 watts and normally used for cooling, is programmable to provide power above, below, or at the set point. Comes complete with USB port and data logging and control software. Power control computer provides 0.1 C regulation of anything. 3.5" x 7.75" x 9.25" (HxWxD) / 120vac, 15 amps, 1800 watts. 250-T No 200 to 250 T J No 0 to 800 J K No 50 to 1200 K T-S Yes 200 to 250 T J-S Yes 0 to 800 J K-S Yes 50 to 1200 K

12318 Model 260/Timer, J-Kem The Model 260/Timer disconnects output power if the process temp exceeds the setpoint by a user specified amount or following a recovery from a power failure.

NIST traceable, USB port and free data logging and control software. 3.5" x 7.75" x 9.25" (HxWxD) / 15 amps, 1800 watts.

4 12318 Model 260/Timer, J-Kem The Model 260/Timer disconnects output power if the process temp exceeds the setpoint by a user specified amount or following a recovery from a power failure. Overtemp is signaled by both a lamp an an audible alarm. Features a 100 hour timer, two power outlets and 0.1º C regulation of anything. NIST traceable, USB port and free data logging and control software. 3.5" x 7.75" x 9.25" (HxWxD) / 15 amps, 1800 watts. VAC 260/Timer-J 120 No 0 to 800 J /Timer-K 120 No 50 to 1200 K /Timer-T 120 No 200 to 250 T /Timer-J-S 120 Yes 0 to 800 J /Timer-K-S 120 Yes 50 to 1200 K /Timer-T-S 120 Yes 200 to 250 T Model 360/Timer, J-Kem 230V, CE-marked version of Model 260/Timer, above. 360/Timer-J-S Yes 0 to 800 J /Timer-K-S Yes 50 to 1200 K /Timer-T-S Yes 200 to 250 T High Safety Controller Model 270, J-Kem Designed for processes requiring uncompromising safety. The only temperature controller available with a built-in, independent backup controller to guard against heating accidents resulting from equipment failure. The desired temperature is entered into the main temperature controller, which regulates heating, and then a high-temperature cut-off is entered into the backup limit controller. If the reaction reaches the high-temperature limit, or if a thermocouple should break, power is turned off to the heater until the controller is manually reset. Both meters independently monitor the reaction temperature. In the event that one meter fails, the other takes over to prevent a heating accident. Provides 100% redundant control. 3.75" x 7.75" x 9.25" (HxWxD) / 120vac, 15 amps, 1800 watts total watts maximum per channel. 270-T No 200 to 250 T J No 0 to 800 J K No 50 to 1200 K T-S Two of each 200 to 250 T J-S Two of each 0 to 800 J K-S Two of each 50 to 1200 K The Model 270 Series units noted above each come with two thermocouple sensors, two cords and two adapters. 4

Multi-Channel Controllers 12310 Gemini Series, J-Kem The Gemini Series features two temperature controllers in a single cabinet to regulate two independent reactions.

Features include: over-temperature protection circuit with audible alarms; dual temperature displays; selectable operating modes; twin circuit breakers; and 100% solid-state design. 3.75" x 7.75" x 9.

Gemini-T No 200 to 250 T 12310-04 Gemini-J No 0 to 800 J 12310-06 Gemini-K No 50 to 1200 K 12310-08 Gemini-T-S Two of each 200 to 250 T 12310-25 Gemini-J-S Two of each 0 to 800 J 12310-27 Gemini-K-S

5 Multi-Channel Controllers Gemini Series, J-Kem The Gemini Series features two temperature controllers in a single cabinet to regulate two independent reactions. This versatile controller has high-power outlets and a 100-hour digital timer (on channel one) to turn heating on or off at a user-entered time. Features include: over-temperature protection circuit with audible alarms; dual temperature displays; selectable operating modes; twin circuit breakers; and 100% solid-state design. 3.75" x 7.75" x 9.25" (HxWxD) / 120vac, 15 amps, 1800 watts total watts maximum per channel. Gemini-T No 200 to 250 T Gemini-J No 0 to 800 J Gemini-K No 50 to 1200 K Gemini-T-S Two of each 200 to 250 T Gemini-J-S Two of each 0 to 800 J Gemini-K-S Two of each 50 to 1200 K Gemini Series, J-Kem 230V, CE-marked version of Gemini Series, above. Gemini-T-S-230 Yes 200 to 250 T Gemini-J-S-230 Yes 0 to 800 J Gemini-K-S-230 Yes 50 to 1200 K Apollo Series, J-Kem Has all the features of the Gemini series, above, but also features an independent 100-hour digital timer on each controller channel. 4" x 8" x 9" (HxWxD) / 120vac, 15 amps, 1800 watts total watts maximum per channel. Apollo-T No 200 to 250 T Apollo-J No 0 to 800 J Apollo-K No 50 to 1200 K Apollo-T-S Two of each 200 to 250 T Apollo-J-S Two of each 0 to 800 J Apollo-K-S Two of each 50 to 1200 K The Apollo and Gemini Series units noted above each come with two thermocouple sensors, two cords and two adapters Quad Series, J-Kem The Quad is your solution when bench space is at a premium the Quad packs four independent temperature controllers into a single unit! Each of the four controller channels has 1200 watts of power, an independent display, and an over-temperature protection circuit. 5.25" x 7" x 7.5" (HxWxD) / 120vac, 15 amps, 1800 watts total watts maximum per channel. Quad-T No 200 to 250 T Quad-J No 0 to 800 J Quad-K No 50 to 1200 K Quad-T-S Four of each 200 to 250 T Quad-J-S Four of each 0 to 800 J Quad-K-S Four of each 50 to 1200 K The Quad Series units noted above each come with four thermocouple sensors, four cords and four adapters. 5

High Power Controller 12317 Model HCC, J-Kem The HCC line of controllers are designed to power large-scale equipment with volumes up to 100 liters.

The desired temperature is entered into the main temperature controller, which regulates heating, and then a high-temperature cut-off is entered into the backup limit controller.

Both meters independently monitor the reaction temperature. In the event that one meter fails, the other takes over to prevent a heating accident. Provides 100% redundant control.

6 High Power Controller Model HCC, J-Kem The HCC line of controllers are designed to power large-scale equipment with volumes up to 100 liters. Built with the same commitment to safety as our controller, the HCC Series features a built-in, independent backup controller to guard against heating accidents resulting from equipment failure. The desired temperature is entered into the main temperature controller, which regulates heating, and then a high-temperature cut-off is entered into the backup limit controller. If the reaction reaches the high-temperature limit, or if a thermocouple should break, power is turned off to the heater until the controller is manually reset. Both meters independently monitor the reaction temperature. In the event that one meter fails, the other takes over to prevent a heating accident. Provides 100% redundant control. These highpower controllers also incorporate a 100-hour timer to turn heating ON or OFF at a user-specified time. Comes complete with USB port and data logging and control software. Power control computer provides 0.1 C regulation of anything. Requires sensor (not included) for operation. 230V version available via special order. 5.5" x 12" x 12.5" (HxWxD) / 130 amps, 3600 watts Instatherm Controller VAC HCC-130-T No 200 to 250 T HCC-130-J No 0 to 800 J HCC-130-K No 50 to 1200 K Model 410, J-Kem The Model 410 is designed for heaters that cannot be operated at 120VAC. This makes the unit perfect for use with many of our Ace Instatherm oil baths. Maximum output voltage of the Model 410 is selected using the power output knob on the front of the controller. Selectable output voltage limit provides precise power and temperature control while protecting low voltage heaters. Comes complete with USB port and data logging and control software. Power control computer provides 0.1 C regulation of anything. 3.25" x 5.25" x 7.25" (HxWxD) / 10, 20, 40, 60, 120 vac, 10 amps, 1200 watts 410-T No 200 to 250 T J No 0 to 800 J K No 50 to 1200 K T-S Yes 200 to 250 T J-S Yes 0 to 800 J K-S Yes 50 to 1200 K Instatherm Bath Kit 9601 Instatherm Bath Kit, Ace/J-Kem Consists of one each and bath, plus one Digital Controller with one J Sensor and controller cord. 120V

/ Sensors For J-Kem Controllers 12180 T- Sensors T thermocouple temperature sensors for use with all J-Kem T model temperature controllers. Either 1/4- or 1/8-inch O.D.

7 / Sensors For J-Kem Controllers T- Sensors T thermocouple temperature sensors for use with all J-Kem T model temperature controllers. Either 1/4- or 1/8-inch O.D. Available in 304 stainless steel or PTFE coated stainless steel sheaths of various lengths. O.D. PTFE Coated? 1/8 6 No /8 12 No /8 18 No /8 24 No /8 36 No /8 6 Yes /8 12 Yes /8 18 Yes /8 24 Yes /8 36 Yes /4 6 No /4 12 No /4 18 No /4 24 No /4 36 No /4 6 Yes /4 12 Yes /4 18 Yes /4 24 Yes /4 36 Yes J- Sensors J thermocouple temperature sensors for use with all J-Kem J model temperature controllers. Either 1/4- or 1/8-inch O.D. Available in 304 stainless steel or PTFE coated stainless steel sheaths of various lengths. O.D. PTFE Coated? 1/8 6 No /8 12 No /8 18 No /8 24 No /8 6 Yes /8 12 Yes /8 18 Yes /8 24 Yes /8 36 Yes /4 6 No /4 12 No /4 18 No /4 24 No /4 36 No /4 6 Yes /4 12 Yes /4 18 Yes /4 24 Yes /4 36 Yes K- Sensors K thermocouple temperature sensors for use with all J-Kem K model temperature controllers. Either 1/4- or 1/8-inch O.D. Available in 304 stainless steel or PTFE coated stainless steel sheaths of various lengths. O.D. PTFE Coated? 1/8 6 No /8 12 No /8 18 No /8 24 No /8 36 No /8 6 Yes /8 12 Yes /8 18 Yes /8 24 Yes /8 36 Yes /4 6 No /4 12 No /4 18 No /4 24 No /4 36 No /4 6 Yes /4 12 Yes /4 18 Yes /4 24 Yes /4 36 Yes For extension cords, see Ace straight and coiled cords, on the following page. 7

Sensor extension cords for use with all J-Kem thermocouple probes. Cords match color of probe type, blue, black, yellow or white.

OST (Standard) SMP (Mini) 12190 Sensor Cords Coiled Probe Style (ft.

J 20 SMP 12190-20 K 20 SMP 12190-21 T 20 SMP 12190-22 J 20 OST 12190-26 K 20 OST 12190-27 T 20 OST 12190-28 12191 Dual Sensor Cords Dual

Available in T, K, and J types in 10- or 25-ft. lengths. Probe Style (ft.

) Connector J 10 SMP 12190-40 K 10 SMP 12190-41 T 10 SMP 12190-42 J 10 OST 12190-44 K 10 OST 12190-45 T 10 OST 12190-46 RTD 10 OST 12190-47

Dual coupling temperature thermocouple sensors for use with Model HCC and 270 J-Kem temperature controllers. Available in J, T or K types.

8 Sensor extension cords for use with all J-Kem thermocouple probes. Cords match color of probe type, blue, black, yellow or white. Available in either 10- or 20-foot coiled or straight styles. Select length, type, and connector, SMP (flat plug) or OST (round plug). OST (Standard) SMP (Mini) Sensor Cords Coiled Probe Style (ft.) Connector J 10 SMP K 10 SMP T 10 SMP RTD 10 SMP J 10 OST K 10 OST T 10 OST J 20 SMP K 20 SMP T 20 SMP J 20 OST K 20 OST T 20 OST Dual Sensor Cords Dual element extension cords for use with dual element sensors for J-Kem models HCC and 270 temperature controllers. Available in T, K, and J types in 10- or 25-ft. lengths. Probe Style (ft.) T J K T J K Sensor Cords Straight Probe Style (ft.) Connector J 10 SMP K 10 SMP T 10 SMP J 10 OST K 10 OST T 10 OST RTD 10 OST J 20 SMP K 20 SMP T 20 SMP J 20 OST K 20 OST T 20 OST Dual Sensors PTFE Coated Dual coupling temperature thermocouple sensors for use with Model HCC and 270 J-Kem temperature controllers. Available in J, T or K types. Probes are PTFE coated stainless steel in various lengths and O.D. Probes require extension cords. O.D. Sensor 1/8 12 T /4 12 T /4 24 T /4 36 T /8 12 J /4 12 J /4 24 J /4 36 J /8 12 K /4 12 K /4 24 K /4 36 K

12185 Wire Sensors Flexible 30-gauge thin wire thermocouple. Ideal for small volumes and hard-to-reach spots.

Available in standard connections, and in 36- and 72-inch lengths. PTFE Coated?

very small volumes and in small systems. Sensors come coated and uncoated in 3.5- or 7-in. lengths.

9 12185 Wire Sensors Flexible 30-gauge thin wire thermocouple. Ideal for small volumes and hard-to-reach spots. Can be used with heating mantles, hotplates, inside of heating equipment and for small surface measurement. Can be inserted through rubber septum for an airtight seal. Available in standard connections, and in 36- and 72-inch lengths. PTFE Coated? Sensor Yes 36 T Yes 36 K No 72 T No 72 K No 72 J Monitor Needle-Tip Sensors Needle-tip, 17-gauge thermocouple sensor for measurement and control of very small volumes and in small systems. Sensors come coated and uncoated in 3.5- or 7-in. lengths. Actual temperature measure is at first 2mm of the probe and must have liquid contact for accurate readings. May be inserted through rubber septa 9107 or 9106 for air-tight seal. Comes with 72-in. PTFE wire extension. Available in T, K, or J type connections. PTFE Coated? Sensor Yes 3.5 T Yes 7.0 T Yes 3.5 K Yes 7.0 K Yes 3.5 J Yes 7.0 J No 3.5 T No 7.0 T No 3.5 K No 7.0 K No 3.5 J No 7.0 J Digital Monitor Monitors and displays the temperature of an attached piece of equipment on a bright LED display. Built-in USB port and free data logging software allows remote temperature monitoring, and provides a GMP, GLP compliant temperature history. is not included. 2.5" x 4.75" x 5.5" (HxWxD) / 50 watts, USB 2.0. DM120-T 200 to 250 T DM120-J 0 to 800 J DM120-K 50 to 1200 K Digital Monitor 230V, CE-marked version of Digital Monitor, above. DM230-T 200 to 250 T DM230-J 0 to 800 J DM230-K 50 to 1200 K

Vacuum Regulators 14063 Precision Vacuum Regulator, J-Kem Perfect for vacuum distillation, unit automatically compensates for leaks in the equipment under test and maintains precise pressure, even in

1 to 760 Torr (atm pressure) in test instruments with volumes as small as 1 ml. Standard features include 16-step programmable pressure ramp and serial communications for PC control and data logging.

10 Vacuum Regulators Precision Vacuum Regulator, J-Kem Perfect for vacuum distillation, unit automatically compensates for leaks in the equipment under test and maintains precise pressure, even in systems with a continuous gas purge. This computer (built-in) controlled vacuum regulator maintains pressure in the range of 0.1 to 760 Torr (atm pressure) in test instruments with volumes as small as 1 ml. Standard features include 16-step programmable pressure ramp and serial communications for PC control and data logging. DVR Specifications: Transducer Diaphragm: Stainless Steel Accuracy: 0.1% Proof Pressure: 200% Controller Regulation: Resolution: Vapor Path Materials: Ramp Rates: Serial Communications: 0.015% of range 0.1 Torr of 0.01 psi Stainless steel and PTFE 100 Torr/sec to 0.1 Torr/hr. RS232 (RS485 or USB on request) Stainless Steel Proportioning Valves Select one for use with Digital Vacuum Regulator , above. For Reactor Volumes Cv Orifice Size PSV-2 1 ml to 2 L in PSV-3 25 ml to 4 L in PSV ml to 22 L in PSV-5 1 L to 50 L in PSV-6 Large Capacity in PSV-7 Large Capacity in PSV-8 Large Capacity in PSV-9 Large Capacity in DVR-PNV Stainless Steel Needle Valve, improves regulation

11 Connect to any vacuum pump or vacuum source, and then to any piece of equipment, to regulate pressure, in most cases to ±1 Torr. A standard pressure ramp feature evacuates equipment at a user-defined rate to eliminate bumping due to solvent degassing or over-evacuation. Ideally suited for large volume distillations, rotary evporators and vacuum chambers. Not recommended for small volume distillations or applications which involve a continuous purge with gas Vacuum Regulator No Mercury Designed for vacuum systems that run continuously, such as oil-filled vacuum pumps, aspirators, or with systems that are always on, like in-house vacuum systems. The unit regulates pressure by opening and closing a valve that separates the vacuum source from the system being evacuated. DVR Vacuum Regulator No Mercury 230V, CE-marked version of DVR-200 Vacuum Regulator, above. DVR Vacuum Regulator No Mercury Designed for use with diaphragm vacuum pumps. In some systems, pressure is regulated by turning the vacuum pump itself on and off. This unit extends the life of diaphragm pumps by never forcing the pump to start against an established vacuum, which can increase pump life by 100%. DVR Vacuum Regulator No Mercury 230V, CE-marked version of DVR-280 Vacuum Regulator, above. DVR Digital Vacuum Monitor Continuous, no regulation, Not pictured. DVM Digital Vacuum Monitor 230V, CE-marked version of DVM-100 Digital Vacuum Monitor, above. Recovers >99% of solvent from rotary evaporators Solvent DVR Pressure (mm Hg) Solvent Volume Time To Dryness Percent Recovery Ether 475 Torr 340 ml 14.6 min. 99.6% CH 2 CI Torr 360 ml 21.9 min. 99.8% CH 2 CI Torr 255 ml 5.9 min. 99.5% EtOAc 90 Torr 316 ml 17.0 min. 99.9% Toluene 50 Torr 273 ml 15.7 Min. 99.4% DVM V versions are CE marked 11

Water Flow Monitors/Controllers 0115 12167 Model LS-120 Lab Safety Controller, J-Kem Lab safety controller by J-Kem combines all the features of the Digital Monitor and the Water-Flow Monitor into a

Plug any piece of equipment into the monitor, then if the water flow rate falls below the set level, or if the reaction temperature goes above or below the user set limits, the outlet power turns off

12 Water Flow Monitors/Controllers Model LS-120 Lab Safety Controller, J-Kem Lab safety controller by J-Kem combines all the features of the Digital Monitor and the Water-Flow Monitor into a single versatile instrument. Plug any piece of equipment into the monitor, then if the water flow rate falls below the set level, or if the reaction temperature goes above or below the user set limits, the outlet power turns off automatically. The unit will also cut off power if the main power is interrupted. The controller then has to be reset. See Ace product family for flow sensors. With Sensor Cord LS-120-T No 200 to 250 T LS-120-J No 0 to 800 J LS-120-K No 50 to 1200 K Description Flow Rate, LPM WFM-01 Flow Sensor 0.1 to WFM-02 Flow Sensor 1 to WFM-03 Flow Sensor 2 to Shut-Off Valve Model WFM-120 Water Flow Monitor, J-Kem J-Kem monitor precisely measures the flow of water through a condenser, bath or a photochemical reactor. Upon interruption or if the flow drops below an operator set rate, power to the monitored equipment is cutoff. Manual power reset. Inclusion of a shut-off valve and either a audible alarm or a digital alarm is recommended. Description Flow Rate, LPM WFM-01 Flow Sensor 0.1 to WFM-02 Flow Sensor 1 to WFM-03 Flow Sensor 2 to Shut-Off Valve WFM-120 Water Flow Monitor Alarm, J-Kem Digital alarm outlet and audible alarm accessories for J-Kem safety controller and water-flow monitors. Allows and units to be set up for alarm warnings when in unsafe conditions. The audible alarm sounds during low or no water conditions for the monitor and the digital alarm activates on either the water flow monitor or the safety controller when conditions are out of set ranges. For Controllers Alarm WFM-AA & Digital WFM-OC Audible CONTROLLERS P.O. Box 688 Vineland, NJ Fax: TOLL-FREE: FAX: sales@aceglass.com

Accurate to 0.1 NIST Traceable Advanced PID Algorighm USB Port Free datalogging/control software. Controllers I N S C O N TA G N

Accurate to 0.1 NIST Traceable Advanced PID Algorighm USB Port Free datalogging/control software Controllers P 2010 C O N TA R I C I I N S G N Serving the laboratory glassware industry for over 70 years